SENECA Z-4AI 4-Channel Input Mojule
TLHOKOMELO TS'ELE
Lentsoe TEMOSO le eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse behang tšireletseho ea mosebedisi kotsing.
Lentsoe ATTENTION e eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse ka senyang sesebelisoa kapa thepa e hokahaneng. Tiisetso e tla fetoha lefeela le lefeela ha ho ka etsahala hore e sebelisoe hampe kapa tampho sebelisa module kapa lisebelisoa tse fanoeng ke moetsi ha ho hlokahala bakeng sa ts'ebetso ea eona e nepahetseng, le haeba litaelo tse bukeng ena li sa lateloe.
- TLHOKOMELISO: Likahare tse felletseng tsa bukana ena li tlameha ho baloa pele ho ts'ebetso efe kapa efe. Mojule o tlameha ho sebelisoa feela ke litsebi tsa motlakase tse hloahloa. Litokomane tse khethehileng li fumaneha ka QR-CODE e bontšitsoeng leqepheng la 1.
- Mojule o tlameha ho lokisoa le likarolo tse senyehileng li nkeloe sebaka ke Moetsi. Sehlahisoa se na le maikutlo a ho tsoa ha electrostatic. Nka mehato e nepahetseng nakong ea ts'ebetso efe kapa efe.
- Ho lahloa ha litšila tsa motlakase le tsa elektroniki (ho sebetsa ho European Union le linaheng tse ling tse nang le recycle). Letšoao la sehlahisoa kapa sephutheloana sa sona le bonts'a sehlahisoa se tlameha ho neheloa setsing sa pokello se lumelletsoeng ho sebelisa litšila tsa motlakase le tsa elektroniki.
SENECA srl; Via Austria, 26 - 35127 - PADOVA - ITALY; Mohala +39.049.8705359 - Fax +39.049.8706287
MOKHOA OA PUISANO
Tšehetso ea tekheniki: support@seneca.it
Lintlha ka sehlahisoa: sales@seneca.it
Tokomane ena ke thepa ea SENECA srl. Likopi le tlhahiso e hanetsoeng ntle le tumello. Litaba tsa tokomane ena li lumellana le lihlahisoa le mahlale a hlalositsoeng.
Lintlha tse boletsoeng li ka fetoloa kapa tsa tlatselletsoa molemong oa tekheniki le/kapa oa thekiso.
THULA MODULE
Litekanyo LxHxD: 17.5 x 102.5 x 111 mm; Boima ba 'mele: 110 g; Sebaka: PA6, e ntšo
LITŠOANTŠISO KA LESOTHO KA PELE PELE
| LED | BOEMO | Tlhaloso ea LED |
| PWR Green | ON | Sesebelisoa se tsamaisoa ka nepo |
| HLOKA mosehla | Ho benya | Tloaelo kapa phoso |
| RX Khubelu | Ho benya | Receipt ea pakete e phethiloe |
| RX Khubelu | ON | Anomaly / Sheba khokahano |
| TX Khubelu | Ho benya | Phetiso ea pakete e phethiloe |
LIEKETSENG MOKHOPO
|
MATS'ELISO |
|
|
TS'ELISO |
TLHOKOMELO
|
|
MAEMO TIKOLO |
Mocheso: -10 ÷ + 65°C
Mongobo: 30% ÷ 90% e se nang condensing. Altitude: Ho fihlela ho 2000 m ka holim'a bophahamo ba leoatle Mocheso oa polokelo: -20 ÷ + 85° Lintlha tsa ts'ireletso: IP20. |
| KOPANO | IEC EN60715, 35mm DIN seporo sebakeng se otlolohileng. |
|
MAKHOPO |
3-way removable screw terminals, pitch 5 mm Sehokelo sa ka morao IDC10 bakeng sa DIN bar 46277 ka pele micro USB |
| PHEPELO EA MOTLAKASE | Moqtage: 10 ÷ 40Vdc; 19 ÷ 28Vac 50 ÷ 60Hz Monyetla: Ka tloaelo: 0.5W @ 24Vdc, Max: 3.5W |
| LITLHAKISO | |
| Moqtage kenya: | Bipolar e nang le FS e ka khonehang ho +2Vdc le +10Vdc Input impedance>100kOhm |
| Kenyelletso ea hajoale: | Bipolar e nang le FS Programmable ho +20mA e nang le 50Ohm shunt ea ka hare e ka khethoang ka DIP-switch. Matla a fumanehang: 90 + 90mA ho 13Vdc. |
| Palo ea likanale: | 4 |
| Qeto ea ho kenya: | 15 bit + letšoao. |
| Input tšireletso: | ± 30Vdc kapa 25mA |
| Moqtage le ho nepahala ha hajoale: | Ho qala: 0.1 % ea tekanyo e feletseng ea Linearity: 0.03% ea sekala. Zero: 0.05% ea sekala.
TC: 100 ppm, EMI: <1 % |
| Sampling nako | 120ms/channel kapa 60ms/channel |
| Tekanyo linako tsa ntlafatso | - 250ms bakeng sa liteishene tse 4 tse nang le lebelo la ADC 1 sample tse ling le tse ling tse 60ms
- 500ms bakeng sa liteishene tse 4 tse nang le lebelo la ADC 1 sample tse ling le tse ling tse 120ms |
| Sefe | e ka hlophisoa ho tloha ho 0 ho isa ho 6 |
TLHOKOMELISO TSA LITLHAKISO TSA MOSEBETSI
| Li-switches tsohle tsa DIP | TLOA |  |
|
| Mekhahlelo ea puisano ea protocol ea ModBUS: | 38400 8, N, 1 Aterese 1 | ||
| Mekhahlelo ea puisano ea boema-kepe bo ka pele ba USB | 2400 8, N, 1 Aterese 1 | ||
| Kenyelletso ea kanale ho tloha ho 1 ho isa ho 4 | TLHOKOMELOTAGE ± 10 Vdc | ||
| Kemelo ea lipalo ea tekanyo ea ho kenya: | ± 10000 mV | ||
| Sampnako ea ling: | 120 ms | ||
MELAO EA KHOPO EA ModBUS
- Kenya li-module ho terene ea DIN (120 max)
- Hokela li-module tsa remoutu u sebelisa likhoele tse loketseng Tafole e latelang e bonts'a data ea bolelele ba thapo:
- Bolelele ba libese: bolelele bo boholo ba marang-rang a Modbus ho latela Baud Rate. Bona ke bolelele ba likhoele tse hokahanyang li-module tse peli tse hole (sheba Setšoantšo sa 1).
- Bolelele ba ho tsoa: bolelele bo boholo ba ho tsoa ho 2 m (sheba setšoantšo sa 1).
Bakeng sa ts'ebetso e phahameng, ho khothalletsoa ho sebelisa likhoele tse khethehileng tse sirelelitsoeng, joalo ka BELDEN 9841
IDC10 MOKHOPI
Phepelo ea motlakase le sebopeho sa Modbus li fumaneha ho sebelisoa bese ea terene ea Seneca DIN, ka sehokelo sa morao sa IDC10, kapa sesebelisoa sa Z-PC-DINAL2-17.5.
Sehokelo sa Morao (IDC 10)
Moelelo oa likhokahano tse fapaneng sehokelong sa IDC10 o bontšoa setšoantšong haeba u lakatsa ho fana ka matšoao ka kotloloho ka sona.
SEBELISA TS'OANELO-LIPHETO
Maemo a di-switches tsa DIP a hlalosa maemo a puisano a Modbus a mojule: Address and Baud Rate Tafole e latelang e bontsha boleng ba Baud Rate le Aterese ho ya ka disetting tsa DIP-switches:
Hlokomela: Ha DIP e fapoha 3 ho isa ho 8 e TIMA, litlhophiso tsa puisano li nkuoa ho tsoa ho programming (EEPROM).
Tlhokomeliso 2: Mohala oa RS485 o tlameha ho felisoa feela qetellong ea mohala oa puisano.
Litlhophiso tsa li-dip-switches li tlameha ho lumellana le litlhophiso tsa lirejisete.
Litlhaloso tsa lirekoto li fumaneha ho USER MANUAL.
TLHOKOMELISO EA ANALOGUE KA DIP-SWITCH:
DIP-Switch SW2 e hlalosa mofuta oa ho kenya mocha o mong le o mong. Likanale tsa 1 ho isa ho tse 4 li ka hlophisoa ka mokhoa oa hajoale kapa oa voltage.
Bakeng sa litlhophiso, sheba tafole ea SW2 lehlakoreng.
LIKHOKELO MOTLATSI
Phepelo ea motlakase
Meeli e ka holimo ha ea lokela ho fetisoa kaha sena se ka senya mojule haholo. Haeba mohloli oa phepelo ea motlakase o sa sireletsoa khahlanong le ho tlala, fuse ea polokeho e nang le boleng bo lumelletsoeng ba 2.5A max e tlameha ho kengoa mothating oa phepelo ea motlakase.
ModBus RS485
Khokahano bakeng sa puisano ea RS485 e sebelisang sistimi e kholo ea MODBUS joalo ka mokhoa o mong ho feta bese ea Z-PC-DINx.
NB Letšoao la polarity ea khokahanyo ea RS485 ha lea tloaeleha 'me lisebelisoa tse ling li ka khelosoa.
LITLHAKISO
- A) Moqtagkenyeletso e nang le sensor e tsoang ho MODULE (13 Vdc)
- B) Moqtagkenyeletso e nang le sesebelisoa sa sensor HA E tsoe ho MODULE
- C) Kenyelletso ea hajoale le phepelo ea sensor HA E tsoe ho MODULE
- D) Kenyelletso ea hajoale e nang le sensor e tsoang ho MODULE (13 Vdc)
- E) Kenyelletso ea hajoale ka phepelo ea sensor ea EXTERNAL
TLHOKOMELO
Meeli e kaholimo ea phepelo ea motlakase ha ea tlameha ho fetisoa, kaha sena se ka baka tšenyo e kholo mojulung. Tlosa mod-ule pele o hokela lintho tse kenang le tse hlahisoang.
Ho fihlela litlhoko tsa ts'ireletso ea motlakase oa motlakase:
- sebelisa lithapo tsa lipontšo tse sirelelitsoeng;
- hokela thebe ho tsamaiso ea lefatše ea lisebelisoa tse khethehileng;
- arola likhoele tse sirelelitsoeng ho tse ling tse sebelisoang bakeng sa ho kenya motlakase (li-inverters, li-motor, lionto tsa induction, joalo-joalo ...).
- etsa bonnete ba hore mojule ha o fane ka matla a phepelotage phahameng ho feta e bontšitsoeng ka litlhaloso tsa tekheniki e le hore e se ke ea e senya.
Litokomane / Lisebelisoa
 |
SENECA Z-4AI 4-Channel Input Mojule [pdf] Buka ea Taelo Z-4AI, 4-Channel Input Mojule, Mojule oa ho Kena oa Analog, Mojule oa 4-Channel Input, Mojule oa Kenyeletso, Mojule |
