SENECA Z-8AI Input kapa Output Mojule ea Analog
TLHOKOMELO TS'ELE
Lentsoe TEMOSO le eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse behang polokeho ea mosebedisi kotsing. Lentsoe ATTENTION e eteletsoeng pele ke letšoao le bontša maemo kapa liketso tse ka senyang sesebelisoa kapa thepa e hokahaneng. Tiisetso e tla fetoha lefeela le lefeela ha ho ka etsahala hore e sebelisoe hampe kapa tampho sebelisa module kapa lisebelisoa tse fanoeng ke moetsi ha ho hlokahala bakeng sa ts'ebetso ea eona e nepahetseng, le haeba litaelo tse bukeng ena li sa lateloe.
- TLHOKOMELISO: Likahare tse felletseng tsa bukana ena li tlameha ho baloa pele ho ts'ebetso efe kapa efe. Mojule o tlameha ho sebelisoa feela ke litsebi tsa motlakase tse hloahloa.
- Litokomane tse khethehileng li fumaneha ho sebelisoa QR-CODE e bontšitsoeng leqepheng la 1.
- Mojule o tlameha ho lokisoa le likarolo tse senyehileng li nkeloe sebaka ke Moetsi.
- Sehlahisoa se na le maikutlo a ho tsoa ha electrostatic. Nka mehato e nepahetseng nakong ea ts'ebetso efe kapa efe.
- Ho lahloa ha litšila tsa motlakase le tsa elektroniki (ho sebetsa ho European Union le linaheng tse ling tse nang le recycle). Letšoao la sehlahisoa kapa sephutheloana sa sona le bonts'a sehlahisoa se tlameha ho neheloa setsing sa pokello se lumelletsoeng ho sebelisa litšila tsa motlakase le tsa elektroniki.
MABAPI KAMPANI
- SENECA srl; Via Austria, 26 - 35127 - PADOVA - ITALY;
- Mohala +39.049.8705359
- Fax +39.049.8706287
MOKHOA OA PUISANO
- Tšehetso ea tekheniki: support@seneca.it
- Lintlha ka sehlahisoa: sales@seneca.it
- Tokomane ena ke thepa ea SENECA srl. Likopi le tlhahiso e hanetsoeng ntle le tumello. Litaba tsa tokomane ena li lumellana le lihlahisoa le mahlale a hlalositsoeng.
- Lintlha tse boletsoeng li ka fetoloa kapa tsa tlatselletsoa molemong oa tekheniki le/kapa oa thekiso.
THULA MODULE
- Boholo: LxHxD 17.5 x 102.5 x 111 limilimithara;
- Boima ba 'mele: 110g;
- Kakaretso: PA6, e ntšo
LITŠOANTŠISO KA LESOTHO KA PELE PELE
| LED | BOEMO | Tlhaloso ea LED |
| PWR Green | ON | Sesebelisoa se tsamaisoa ka nepo |
| HLOKA mosehla | Ho benya | Tloaelo kapa phoso |
| RX Khubelu | Ho benya | Receipt ea pakete e phethiloe |
| RX Khubelu | ON | Anomaly / Sheba khokahano |
| TX Khubelu | Ho benya | Phetiso ea pakete e phethiloe |
LIEKETSENG MOKHOPO
| LITLHAKISO | |
| Moqtagkenya: | Bipolar e nang le FS e ka khonehang ho +2Vdc le +10Vdc Input impedance>100kOhm |
| Kenyelletso ea hajoale: | Bipolar e nang le FS Programmable ho +20mA e nang le 50Ohm shunt ea ka hare e ka khethoang ka DIP-switch. Matla a fumanehang: 90 + 90mA ho 13Vdc. |
| Palo ea likanale: | 8 |
| Qeto ea ho kenya: | 15 bit + letšoao. |
| Input tšireletso: | ± 30Vdc kapa 25mA |
| Precision voltage le ea hajoale: | Ho qala: 0.1 ea tekanyo e feletseng Linearity : 0.03% ea sekala. Zero: 0.05% ea sekala.
TC: 100 ppm, EMI: <1 % |
| Sampnako e telele | 120 ms/channel kapa 60 ms/kanale |
| Nako ea ntlafatso ea tekanyo (sampsekhahla sa bolelele: 10ms) | Lenaneo le 1 le butsoitse (nako ea ntlafatso bakeng sa kanale e le 1)
Likanale tse 4 li lumelletsoe (nako ea ntlafatso bakeng sa likanale tse 4) Likanale tse 8 li lumelletsoe (nako ea ntlafatso bakeng sa likanale tse 8) |
TLHOKOMELISO TSA LITLHAKISO TSA MOSEBETSI
SEBELISA TS'OANELO-LIPHETO
Boemo ba li-switches tsa DIP bo hlalosa liparamente tsa puisano tsa libese tsa Mod tsa mojule: Aterese le Sekhahla sa Baud Tafole e latelang e bontša litekanyetso tsa Baud Rate le Aterese ho latela maemo a DIP-switch:
Hlokomela: Ha DIP e fapoha 1 ho isa ho 8 e TIMA, litlhophiso tsa puisano li nkuoa ho tsoa ho programming (EEPROM).
Tlhokomeliso 2: Mohala oa RS485 o tlameha ho felisoa feela qetellong ea mohala oa puisano.
Litlhophiso tsa li-dip-switches li tlameha ho lumellana le litlhophiso tsa lirejisete. Tlhaloso ea lirekoto e fumaneha ho USER MANUAL.
LIKHOKELO MOTLATSI
Phepelo ea motlakase le sebopeho sa Modbus li fumaneha ho sebelisoa bese ea terene ea Seneca DIN, ka sehokelo sa morao sa IDC10, kapa sesebelisoa sa Z-PC-DINAL-17.5.
Sehokelo sa morao (IDC 10)
Sets'oants'o se bonts'a meelelo ea likhokahano tse fapaneng tsa IDC10 haeba matšoao a tla romelloa ka tsona ka kotloloho.
LITLHAKISO
- A) Moqtagkenyeletso e nang le sensor e tsoang ho MODULE (13 Vdc)
- B) Moqtagkenyeletso e nang le sesebelisoa sa sensor HA E tsoe ho MODULE
- C) Kenyelletso ea hajoale le phepelo ea sensor HA E tsoe ho MODULE
- D) Kenyelletso ea hajoale e nang le sensor e tsoang ho MODULE (13 Vdc)
- E) Kenyelletso ea hajoale e nang le motlakase oa sensor EXTERNAL
TLHOKOMELO
- Meeli e kaholimo ea phepelo ea motlakase ha ea tlameha ho fetisoa, kaha sena se ka baka tšenyo e kholo mojulung. Tima mojule pele o hokela lintho tse kenang le tse hlahisoang.
- Ho fihlela litlhoko tsa ts'ireletso ea motlakase oa motlakase:
- sebelisa lithapo tsa lipontšo tse sirelelitsoeng;
- hokela thebe ho tsamaiso ea lefatše ea lisebelisoa tse khethehileng;
- arola likhoele tse sirelelitsoeng ho tse ling tse sebelisoang bakeng sa ho kenya motlakase (li-inverters, li-motor, lionto tsa induction, joalo-joalo ...).
- kenya fuse e nang le matla a MAX a 2.5A haufi le mojule.
- etsa bonnete ba hore matla a phepelo ea matlatage ho mojulung ha e fete: 40Vdc kapa 28Vac, ho seng joalo mojule tla senyeha.
Litokomane / Lisebelisoa
 |
SENECA Z-8AI Input kapa Output Mojule ea Analog [pdf] Buka ea Taelo Z-8AI, Mojule oa Input kapa Output, Mojule oa Analog, Z-8AI Analog Input kapa Output Module |
