TLHALOSO

E-2000M Series balaoli ba ts'ebetso ea sepheo se akaretsang ke lisebelisoa tsa indasteri ho 1/4 DIN (96×96 mm IEC/TR 60668) litekanyo tse entsoeng ka ho sebelisa li-microcontrollers tsa moloko o mocha tse nang le on/off, PID le mefuta e meng ea taolo. Lintho tse kenang le tse hlahisoang li ka hlophisoa habonolo ke mosebelisi.
Ho balaoli ba E-2000M Series, boleng bo behiloeng le boleng bo lekantsoeng bo ka bontšoa ho tloha -1999 ho ea ho 9999 ka lipontšo tse peli tsa 4-digit le lisebelisoa tsa morero o akaretsang (T / C, R/T, mV, mA) li ka hlophisoa.

DIMENSION LE PANEL KHAOTSOA

LIEKETSENG LEEKA

Liphetho tsa taolo ea 1st le 2nd li ka khethoa e le Relay (RL1, RL2) kapa SSR (SSR1, SSR2).
Tlhahiso ea Analog (AO1) e ka khethoa e le mA kapa 0-10 V DC.

TLHOKOMELO

Selaoli sa E-2000M se etselitsoe ho kenya liphanele mme se lokela ho sebelisoa tikolohong ea indasteri.

• Sephutheloana sa molaoli oa E-2000M se na le; Molaoli, likotoana tse 2 tsa ho phahamisa clamps, Bukana ea mosebelisi le setifikeiti sa Tiisetso
• Ka mor'a ho bula sephutheloana, ka kopo sheba likahare ka lethathamo le ka holimo. Haeba sehlahisoa se rometsoeng e le sa mofuta o fosahetseng, ntho leha e le efe e sieo kapa ho na le mefokolo e bonahalang, ikopanye le morekisi eo u rekileng sehlahisoa ho eena.
• Pele o kenya le ho sebelisa molaoli, ka kopo bala bukana ea mosebelisi ka botlalo.
• Ho kenya le ho hlophisoa ha molaoli ho tlameha ho etsoa feela ke motho ea tšoanelehang ka lisebelisoa.
• Boloka yuniti hole le likhase tse tukang, tse ka bakang ho phatloha.
• U se ke ua sebelisa joala kapa metsoako e meng ho hloekisa selaoli. Sebelisa lesela le hloekileng le kolobisitsoeng ka metsing le petelitsoeng ka thata ho hlakola karolo e ka ntle ea selaoli ka bonolo.
• Ha e sebelisoe lits'ebetsong tsa bongaka.

TSAMAISO TSELA EA EU
Moqolo o tlasetage Taelo: EN 61010-1
Taelo ea EMC: EN 61326-1TS EN ISO 9001
Setifikeiti sa Tsamaiso ea Tsamaiso ea Boleng

KHOUTA MOFUTA

E-2000M Series Universal Advanced Controller
Pheta Outputs
Ha ho letho
1 relay (RL1)
Li-relay tse 2 (RL1, RL2)
1 SSR (SSR1)
1 SSR (SSR1) + 1 relay (RL2)
2 SSR (SSR1, SSR2)
Liphetho tsa Analog
Ha ho letho
0-20 / 4-20 mA (AO1)
0-10 V DC (AO1)
Puisano
Ha ho letho
Tshebetso Voltage
85-265 V AC / 85-375 V DC
20-60 V AC / 20-60 V DC

TS'OANELO TS'OANELO

Paramethara	Tlhaloso
Mofuta oa Taolo	Ho Bulela/Ho tima, PID, Mocheso/Ho pholile, Taolo e Phaphamang ea Li-valve
Tshebetso Voltage	20..60 V AC / 20..60 V DC kapa 85..265 V AC / 85..375 V DC
Relays / SSR	2 x SPST - NO 250 V AC 5A kapa 24 V DC 25 mA (SSR) li-drive
Boholo (mm)	96 (Bolelele) x 96 (Bolelele) x 50 (Bophara)
Sekhao sa Phanele (mm)	92 (Bolelele) X 92 (Bolelele)
Analog Output	1 x 0..20 / 4-20 mA kapa 0..10 V DC ha u khetha
Keletso ea Analog	Universal (Tlhaloso ea 1)
Puisano (RS-485)	Ha ho letho
Input ea dijithale	Ha ho letho
Maikutlo a Valve	Ha ho letho
Phepelo ea Transmitter	Ha ho letho
Boima ba 'mele	230 g
Tšebeliso ea Matla	Max. 7 W (10 VA)
Mocheso oa ho sebetsa	– 10 °C … 55 °C
Mocheso oa polokelo	– 25 °C … 65 °C
Mohopolo	Maks. 100.000 ngola
Sehlopha sa Tšireletso	IP-65 Front Panel, IP-20 Ka morao Taba

Lintlha:
(1) Kenyelletso ea Kakaretso :
Thermocouple: B, E, J, K,L, N, R, S, T, U
Thermometer ea ho hanyetsa: Pt-100
Hajoale: 0-20 mA, 4-20 mA (Mohala)
Moqtage: 0-50 mV, 0-1 V, 0.2- 1 V (Linear),
0-10 V DC, e tlameha ho hlalosoa ka tatellano.
Qeto: 16 hanyane
Ho nepahala: Thermocouple, Max. +1.0 °C (Phetoho le phoso ea CJC)
Resistance Thermometer, Max. 0.5 °C (Phetoho le matšeliso a ho hanyetsa mohala)
Kenyelletso ea Linear, Max. % 0.1

PARAMELA TABLE

		Tlhaloso		Min	Maks	Yuniti
LIEKETSENG LIEKETSENG			Mofuta oa 1 oa Analog	Lethathamo la 1
			Ntlha ea Decimal	0	3
			Kenyelletso ea Analog 1 Linear Scale Boleng bo Tlase	-199.9	999.9	EU
			Kenyelletso ea Analog 1 Linear Scale Boleng bo ka Holimo	-199.9	999.9	EU
			Setsi sa Mocheso
			Analog Input 1 Offset Boleng	-100.0	100.0	EU
			Sefa sa 1 sa Analog	1	15	s
			Kenyelletso ea Analog 1 Sensor e robehileng

TAOLI LIHLOKO			Laola Set Point Mohloli	Lethathamo la 2
			Laola Beha Point Lower Limit	-199.9		EU
			Laola Beha Ntlha ea Holimo Moedi		999.9	EU
			Control Set Point Ramping Rate		60.0	EU/mots
			1. Mohato Beha Boleng			EU
			1. Nako ea Mohato		999.9	min
			2. Mohato Beha Boleng			EU
			2. Nako ea Mohato		999.9	min
			3. Mohato Beha Boleng			EU
			3. Nako ea Mohato		999.9	min

LIEKETSENG ALAMO			Alamo 1 Mofuta	Lethathamo la 3
			Alarm 1 Set Point	-199.9	999.9	EU
			Alamo 1 Hysteresis	0.0	999.9	EU
			Alamo 1 Lock
			Alamo 2 Mofuta	Lethathamo la 3
			Alarm 2 Set Point	-199.9	999.9	EU
			Alamo 2 Hysteresis	0.0	999.9	EU
			Alamo 2 Lock

LITLHAKISO TSE HLAHANG			Mofuta oa Taolo	Lethathamo la 4
			Foromo ea Taolo []
			Nako ea ho laola	1	250	s
			Khetho ea Mokhoa oa Matsoho
			Nako ea Maeto ea Valve ea Taolo e Phaphamang	10	2500	s
			Sehlopha se Shoeleng	0.1	25.0	%
			Laola Output Lower Moedi	0.0		%
			Laola Output Upper Limit		100.0	%
			Laola Output Manual Reset			(Y0
			PID Matla a Boitšoaro	0	4
			Retransmission Scale Low Boleng Boleng	-200.		EU
			Retransmission Scale Holimo Boleng		1000.	EU
			Relay 1 Mosebetsi	Lethathamo la 5
			Relay 2 Mosebetsi	Lethathamo la 5
			Analog Output 1 Mosebetsi	Lethathamo la 6
			Mofuta oa 1 oa Analog Output	Lethathamo la 7.1 le Lethathamo la 7.2

LIEKETSENG PID			PID Auto Tune
			Mofuta oa parameter ea PID
			Sehlopha sa Proportional +	0.1	999.9	EU
			Sehlopha sa Proportional -	0.1	999.9	EU
			Nako e Kopanetsoeng +		9999	s
			Nako e Kopanetsoeng -		9999	s
			Nako ea ho Nkoa +		2500	s
			Nako e Ncha -		2500	s
			Hysteresis	0.0	999.9	EU

TS'IRELETSO			K'houtu ea tšireletso	0	9999
			Boemo ba ho fihlella Parameter	0	9
			Boemo ba ho beha Parameter	0	9
			Litlhophiso tsa Feme []

HO FUMANA LITŠOANTŠISO

Kopo ea ExAMPTS'ELISO

1. Kenyelletso: Pt-100 Relay / Alamo1: 50 °C Tlase, Relay2 / Alamo2: 55 °C Holimo
   AO1: 4-20 mA PID Sephetho sa Taolo
2. Kenyelletso: Mofuta oa TC J, Relay1: Output Control Output, Relay2 / Alarm2: 350 °C Holimo
3. Kenyelletso: TC Type K, Profile Taolo (Ramp ho fihlela ho 400 ° C ka metsotso e 10 'me u eme metsotso e 60),
   Relay1: PID Control Output, AO1: Retransmission Output (4-20 mA, 0-1200 °C)

Letlapa la 1. Likhetho tsa Mofuta oa Input
	Mofuta oa B Thermocouple
	Mofuta oa E Thermocouple
	Mofuta oa J Thermocouple
	Mofuta oa K Thermocouple
	Mofuta oa L Thermocouple
	Mofuta oa N Thermocouple
	Mofuta oa R Thermocouple
	Mofuta oa S Thermocouple
	Mofuta oa T Thermocouple
	Tlanya U Thermocouple
	Pt-100
	0-20 mA
	4-20 mA
	0-50 mV
	0-1 V
	0.2-1 V
	0-10 V (*)
	2-10 V (*)

(*) Kenyelletso ea volt e ikhethileng

Letlapa la 2. Likhetho tsa ho beha taolo
	Tokiso ea ka hare ka linotlolo
	Ka Profile Taolo

Letlapa la 3. Likhetho tsa Alamo
	E tima
	Alamo e tlase
	Alamo e Phahameng
	Phapang e tlase
	Phapang e Phahameng
	Alamo ea Sehlopha (In)
	Alamo ea sehlopha (E tsoa)

Letlapa la 4. Likhetho tsa Mofuta oa Taolo
	Ha ho Taolo
	Motho a le Mong (Mocheso)
	Habeli (Mocheso/Ho pholile)
	Taolo e Phaphamang ea Valofo

Tablo 5. Relay Output Options
	PID + (Ho futhumatsa)
	PID - (Ho pholile)
	On-Off + (Ho futhumatsa)
	On-Off – (Ho pholile)
	Alamo 1
	Alamo 2
	Alamo 3
	Alamo 4

Letlapa la 6. Likhetho tsa Output tsa Analog
	PID + (Ho futhumatsa)
	PID - (Ho pholile)
	Boleng ba Ts'ebetso
	Laola Seta Boleng

Lethathamo la 7.1. Analog Output Range
	0-20 mA
	20-0 mA
	4-20 mA
	20-4 mA

Lethathamo la 7.2. Analog Output Range
	0-10 V
	10-0 V
	2-10 V
	10-2 V

Bakeng sa tlhaiso-leseling e batsi, o ka fihlella bukana ea mosebelisi e felletseng ea sesebelisoa tlasa sehlooho se reng "User Manual" ho. www.elimko.com.tr.
U ka sebelisa Khoutu ea QR ka pele bakeng sa sena.

Moetsi / Tšehetso ea Theknoloji : Elimko Co. Ltd.
8. Cadde 21. Sokak No:16 06510 Emek / ANKARA - TURKEY
Mohala:+ 90 312 212 64 50 Fax:+ 90 312 212 41 43
www.elimko.com.tr e-postal: elimko@elimko.com.trhttps://elimko.com.tr/en/technical-support/user-manuels 

Litokomane / Lisebelisoa

Elimko E-2000M Universal Advanced Controller [pdf] Bukana ea Mosebelisi E-2000M Universal Advanced Controller, E-2000M, Universal Advanced Controller, Advanced Controller, Controller

Litšupiso

• Bukana ea Mosebelisi