Elimko E-200 Series Universal Advanced Controller User Guide
TLHALOSO
E-200 Series balaoli ba morero oa kakaretso ke lisebelisoa tsa indasteri ka boholo ba 1/4 DIN (96×96 mm IEC/TR 60668) tse entsoeng ka ho sebelisa li-microcontrollers tsa moloko o mocha tse nang le on/off, PID le mefuta e meng ea taolo. Lintho tse kenang le tse hlahisoang li ka hlophisoa habonolo ke mosebelisi.
Ho balaoli ba E-200 Series, boleng bo behiloeng le boleng bo lekantsoeng bo ka bontšoa ho tloha ho -1999 ho ea ho 9999 ka lipontšo tse peli tsa 4-digit le lisebelisoa tse akaretsang (T / C, R/T, mV, mA) li ka hlophisoa.
DIMENSION LE PANEL KHAOTSOA
LIEKETSENG LEEKA
Tshebetso voltage loketseng mofuta oa sesebelisoa e tla sebelisoa
Liphetho tsa taolo ea 1st le 2nd li ka khethoa e le Relay (RL1, RL2) kapa SSR (SSR1, SSR2).
Liphetho tsa Analog (AO1, AO2 ) li ka khethoa e le mA kapa 0-10 V DC.
Lisebelisoa tsa dijithale li sebelisoa ka ho hokahanya tlhahiso e omileng ea khokahano lipakeng tsa terminal ea COM le kenyo e lakatsehang (DI1, DI2 kapa DI3)
TEMOSO
Selaoli sa E-200 se etselitsoe ho kenya liphanele mme se lokela ho sebelisoa tikolohong ea indasteri.
TSAMAISO TSELA EA EU
Moqolo o tlasetage Directive: EN 61010-1
Taelo ea EMC: EN 61326-1
KHOUTA MOFUTA
E-200 Series Universal Advanced Controller
Pheta Outputs
- Li-relay tse 2 (RL1, RL2)
- Li-relay tse 3 (RL1, RL2, RL3)
- Li-relay tse 4 (RL1, RL2, RL3, RL4)
- 1 SSR (SSR1) + 1 relay (RL2)
- 1 SSR (SSR1) + 2 li-relay (RL2, RL3)
- 1 SSR (SSR1) + 3 li-relay (RL2, RL3, RL4)
- 2 SSR (SSR1, SSR2) + 1 li-relay (RL3)
- 2 SSR (SSR1, SSR2) + 2 li-relay (RL3, RL4)
Liphetho tsa Analog
- 1 adet 0-20 / 4-20 mA (AO1)
- 2 adet 0-20 / 4-20 mA (AO1, AO2)
- 1 adet 0-10 V DC (AO1)
- 2 adet 0-10 V DC (AO1, AO2)
- 1 adet 0-20 / 4-20 mA (AO1) + 1 adet 0-10 V DC (AO2)
Puisano
Ha ho letho
RS-485 **
Tshebetso Voltage
85-265 V AC / 85-375 V DC
20-60 V AC / 20-60 V DC
* Liphetho tsa analog li arotsoe ho tse ling.
**Ha lisebelisoa tsa E-200 Series li laetsoe ka puisano, converter ea E-IB-11 USB-RS485 e ka sebelisoa bakeng sa khokahanyo ea PC. Ho na le tse sa tšoaneng taolo le go baya leitlho Software fanoeng ke Elimko.
TS'ELISO MOTS'OANE
| Paramethara | Tlhaloso | |
| Mofuta oa Taolo | Ho Bulela/Ho tima, PID, Mocheso/Ho pholile, ho Phaphama le ho Fetola Taolo ea Li-valve | |
| Tshebetso Voltage | 20..60 V AC / 20..60 V DC kapa 85..265 V AC / 85..375 V DC | |
| Liphello tsa SSR | 4 Adet SPST – NO 250 V AC 5A relays kapa 24 V DC 25 mA (SSR) drives | |
| Boholo (mm) | 96 (Bolelele) x 96 (Bolelele) x 100 (Bophara) | |
| Sekhao sa Phanele (mm) | 92 (Bolelele) X 92 (Bolelele) | |
| Analog Output | 2 x 0..20 / 4-20 mA kapa 0..10 V DC ha u khetha | |
| Ngoanana ea Analog§ | Bokahohle (Tlhaloso ea 1), | 1 x Sehlopha sa ka ntle (mA) |
| Puisano (RS-485) | E teng (ka boikhethelo) | |
| Input ea dijithale | Likenyelletso tse 3 | |
| Maikutlo a Valve | E fumaneha (Tlhaloso ea 2) | |
| Phepelo ea Transmitter | E fumaneha | |
| Boima ba 'mele | 430 g | |
| Tšebeliso ea Matla | Max. 7 W (10 VA) | |
| Mocheso oa ho sebetsa | - 10 °C … 55 °C | |
| Mocheso oa polokelo | - 25 °C … 65 °C | |
| Mohopolo | Maks. 100.000 ngola | |
| Sehlopha sa Tšireletso | IP-65 Front Panel, IP-20 Ka morao Taba | |
Lintlha:
- Kenyelletso ea Kakaretso:
Thermocouple: B, E, J, K, L, N, R, S, T, U
Resistance Thermometer: Pt-100
Hona joale: 0-20 mA, 4-20 mA (Mohala)
Moqtage: 0-50 mV, 0-1 V, 0.2-1 V (Linear),
0-10 V DC, e tlameha ho hlalosoa ka tatellano.
Qeto: 16 hanyane
Ho nepahala: Thermocouple, Max. ±1.0 °C (Phetoho le phoso ea CJC)
Resistance Thermometer, Max. 10.5 °C (Phetoho le matšeliso a ho hanyetsa mohala)
Kenyelletso ea Linear, Max. % 0.1 - Feedback ea Valve e fanoa e le tlhahiso ea potentiometer ho lilaoli tse tloaelehileng. Haeba mofuta oa maikutlo o kopuoa e le mA, o tlameha ho hlalosoa ka tatellano
PARAMELA TABLE
| Tlhaloso | Min | Maks | Yuniti | |||
| LIEKETSENG LIEKETSENG | gn | INP1 | Mofuta oa 1 oa Analog | Lethathamo la 1 | ||
| DP | Ntlha ea Decimal | 0 | 3 | |||
| S LO | Kenyelletso ea Analog 1 Linear Scale Boleng bo Tlase | -199.9 | 999.9 | EU | ||
| S HI | Kenyelletso ea Analog 1 Linear Scale Boleng bo ka Holimo | -199.9 | 999.9 | EU | ||
| UNI | Setsi sa Mocheso | * | * | |||
| OS | Analog Input 1 Offset Boleng | -100.0 | 100.0 | EU | ||
| LR | Sefa sa 1 sa Analog | 1 | 15 | s | ||
| SNBR | Kenyelletso ea Analog 1 Sensor e robehileng | LO | HI | |||
| INP2 | Mofuta oa 2 oa Analog | -2 | -2 | |||
| S2LO | Kenyelletso ea Analog 2 Linear Scale Boleng bo Tlase | -199.9 | 999.9 | EU | ||
| S2HI | Kenyelletso ea Analog 2 Linear Scale Boleng bo ka Holimo | -199.9 | 999.9 | EU | ||
| S2BR | Kenyelletso ea Analog 2 Sensor e robehileng | LO | HI | |||
| DR | Aterese ea Modbus | 1 | 127 | |||
| B UD | Sekhahla sa Modbus Baud [ .8, . , 1 .2, 8. kbaud] | .8 | 8. | |||
| PR Y | Modbus Parity [Ha ho letho, O, Esita le] | |||||
| TAOLI LIHLOKO | SE P | SPSR | Laola Set Point Mohloli | Lethathamo la 2 | ||
| SPLL | Laola Beha Point Lower Limit | -199.9 | SPHL | EU | ||
| SPHL | Laola Beha Ntlha ea Holimo Moedi | SPLL | 999.9 | EU | ||
| SPRR | Control Set Point Ramping Rate | O | 60.0 | EU/mots | ||
| S-1 | 1. Mohato Beha Boleng | SPLL | SPHL | EU | ||
| -1 | 1. Nako ea Mohato | O | 999.9 | min | ||
| S-2 | 2. Mohato Beha Boleng | SPLL | SPHL | EU | ||
| -2 | 2. Nako ea Mohato | O | 999.9 | min | ||
| S- | 3. Mohato Beha Boleng | SPLL | SPHL | EU | ||
| - | 3. Nako ea Mohato | O | 999.9 | min | ||
| SE 1 | Digital Input Selectable Seta 1 | SPLL | SPHL | EU | ||
| SE 2 | Digital Input Selectable Seta 2 | SPLL | SPHL | EU | ||
| SE | Digital Input Selectable Seta 3 | SPLL | SPHL | EU | ||
| SE | Digital Input Selectable Seta 4 | SPLL | SPHL | EU | ||
| LIEKETSENG ALAMO | 1dUJB | R 1LP | Alamo 1 Mofuta | Lethathamo la 3 | ||
| R ISP | Alarm 1 Set Point | -199.9 | 999.9 | EU | ||
| R 11-N | Alamo 1 Hysteresis | 0.0 | 999.9 | EU | ||
| R ILE | Alamo 1 Lock | dSb | Enb | |||
| RaP | Alamo 2 Mofuta | Lethathamo la 3 | ||||
| R2SP | Alarm 2 Set Point | -199.9 | 999.9 | EU | ||
| 1121-1 | Alamo 2 Hysteresis | 0.0 | 999.9 | EU | ||
| Rab | Alamo 2 Lock | dSb | Enb | |||
| R3LP | Alamo 3 Mofuta | Lethathamo la 3 | ||||
| R3SP | Alarm 3 Set Point | -199.9 | 999.9 | EU | ||
| R3 tiy | Alamo 3 Hysteresis | 0.0 | 999.9 | EU | ||
| R3LL | Alamo 3 Lock | dSb | Enb | |||
| R4 hp | Alamo 4 Mofuta | Lethathamo la 3 | ||||
| F1'iSP | Alarm 4 Set Point | -199.9 | 999.9 | EU | ||
| R'iti3 | Alamo 4 Hysteresis | 0.0 | 999.9 | EU | ||
| IT-LOA | Alamo 4 Lock | dSb | Enb | |||
| ELF) | Mofuta oa Taolo | Lethathamo la 4 | ||
| Cfrff | Foromo ea Taolo [d Jr. reEu] | d tr | reEu | |
| [Prd | Nako ea ho laola | 1 | 250 | s |
| F■NPR | Khetho ea Mokhoa oa Matsoho | d5b | Enb | |
| hrha; | Nako ea Maeto ea Valve ea Taolo e Phaphamang | 10 | 2500 | s |
| dbnd | Sehlopha se Shoeleng | 0.1 | 25.0 | °A |
| oLL | Laola Output Lower Moedi | 0.0 | oHL | °A |
| of-IL | Laola Output Upper Limit | oLL | 100.0 | °A |
| °Fir- | Laola Output Manual Reset | oLL | oHL | crA |
| Pon[ | PID Matla a Boitšoaro | 0 | 4 | |
| Er-LL | Retransmission Scale Low Boleng Boleng | -199.9 | Erl-IL | EU |
| Ke HL | Retransmission Scale Holimo Boleng | bra | 999.9 | EU |
| rL ID | Relay 1 Mosebetsi | Lethathamo la 5 | ||
| r L 2d | Relay 2 Mosebetsi | Lethathamo la 5 | ||
| ke L3d | Relay 3 Mosebetsi | Lethathamo la 5 | ||
| r L 9d | Relay 4 Mosebetsi | Lethathamo la 5 | ||
| Ro Id | Analog Output 1 Mosebetsi | Lethathamo la 6 | ||
| Ro Ir | Mofuta oa 1 oa Analog Output | Lethathamo la 7.1 le Lethathamo la 7.2 | ||
| Ro2d | Analog Output 2 Mosebetsi | Lethathamo la 6 | ||
| Ro2r | Mofuta oa 2 oa Analog Output | Lethathamo la 7 1 ve Lethathamo la 7.2 | ||
| SruL | Feedback Valve Boemo bo Koetsoeng ka Botlalo | |||
| Sro1-1 | Feedback Valve Fully-Open Position | |||
| SDNI113S thuso | 31-'11 3 | RE | PID Auto Tune | TLOA | on | |
| P Id | Mofuta oa parameter ea PID | SE d | Rdu | |||
| Pb-ke | Sehlopha sa Proportional + | 0.1 | 999.9 | EU | ||
| Pb-2 | Sehlopha sa Proportional - | 0.1 | 999.9 | EU | ||
| ILH | Nako e Kopanetsoeng + | TLOA | 9999 | S | ||
| BOHLOKO | Nako e Kopanetsoeng - | TLOA | 9999 | S | ||
| dEH | Nako ea ho Nkoa + | TLOA | 2500 | S | ||
| dEE | Nako e Ncha - | TLOA | 2500 | S | ||
| PN5 | Hysteresis | 0.0 | 999.9 | EU |
| nano3s | 2•3-'d | 5Cod | K'houtu ea tšireletso | 0 | 9999 | |
| dPr I | Boemo ba ho fihlella Parameter | 0 | 9 | |||
| RPr I | Boemo ba ho beha Parameter | 0 | 9 | |||
| FESb | Litlhophiso tsa Feme [Ho tloha. Morena. SR" E. dab] |
HO FUMANA LITŠOANTŠISO
Kopo ea ExAMPTS'ELISO
- Kenyo: Pt-100 Relay / Alarm1: 50 °C Tlase, Relay2 / Alarm2: 55 °C Holimo A01: 4-20 mA PID Control Output
- Kenyo: Mofuta oa TC oa J, Relay1: Output Control Output, Relay2 / Alarm2: 350 °C Holimo
- Kenyo: Mofuta oa TC oa K, Profile Taolo (Ramp ho fihlela ho 400 ° C ka metsotso e 10 'me u eme metsotso e 60), Relay1: PID Control Output, A01: Retransmission Output (4-20 mA, 0-1200 °C)
- Kenyo: 4-20 mA, Sekala: 0-600, Sebaka se Seng sa Kantle: 4-20 mA, Sekala: 0-600, Taolo ea Li-valve e Phaphamang (Nako ea ho Tsamaea 30 s), Relay1: Phallo e Bulehileng, Relay2: Valve Close InP SCLO SCH! InP2 52L 52H CEYP Erth Lid L2d
Bakeng sa tlhaiso-leseling e batsi, o ka fihlella bukana ea mosebelisi e felletseng ea sesebelisoa tlasa sehlooho se reng "User Manual" ho. www.elimko.com.tr.
U ka sebelisa Khoutu ea QR ka pele bakeng sa sena.
Litokomane / Lisebelisoa
 |
Elimko E-200 Series Universal Advanced Controller [pdf] Bukana ea Mosebelisi E200_rev0_eng_Quick_Start_Guide.pdf, H zl _E200_rev0_eng11, E-200 Series, E-200 Series Universal Advanced Controller, Universal Advanced Controller, Advanced Controller, Controller |
 |
Elimko E-200 Series Universal Advanced Controller [pdf] Bukana ea Mosebelisi E200, KY-200-1123-1, E-200 Series Advanced Advanced Controller, Universal Advanced Controller, Advanced Controller |
