DELTA DVP02DA-E2 ES2-EX2 Letoto la Sehlahisoa sa Analog
Kea leboha ka ho khetha letoto la Delta's DVP PLC. DVP02DA-E2 (DVP04DA-E2) module ea tlhahiso ea analog e amohela lihlopha tse 2 (4) tsa data ea dijithale ea 16-bit ho tsoa ho PLC MPU mme e fetolela data ea dijithale hore e be matšoao a 2 (4) a tlhahiso ea analog (vol.tage kapa hona joale). Ntle le moo, o ka fihlella data ka mojulung ka ho sebelisa litaelo tsa FROM/TO kapa ho ngola boleng ba liteishene ka kotloloho ka ho sebelisa litaelo tsa MOV (Ka kopo sheba kabo ea lirekoto tse khethehileng D9900 ~ D9999).
- DVP02DA-E2 (DVP04DA-E2) ke sesebelisoa sa OPEN-TYPE. E lokela ho kenngoa ka k'haboteng ea taolo e se nang lerōle le tsamaisoang ke moea, mongobo, ts'oaetso ea motlakase le ho thothomela. Ho thibela basebetsi bao e seng basebetsi ho sebetsa DVP02DA-E2 (DVP04DA-E2), kapa ho thibela kotsi ho senya DVP02DA-E2 (DVP04DA-E2), khabinete ea taolo eo DVP02DA-E2 (DVP04DA-E2) e kentsoeng ho eona e lokela ho kenngoa. hlomelloa ka tšireletso. Bakeng sa mohlalaample, khabinete ea taolo eo ho eona DVP02DA-E2
(DVP04DA-E2) e kenngoa e ka buloa ka sesebelisoa se khethehileng kapa senotlolo. - U SE KE UA hokela motlakase oa AC ho litheminale life kapa life tsa I/O, ho seng joalo tšenyo e kholo e ka hlaha. Ka kopo, sheba lithapo tsohle hape pele DVP02DA-E2 (DVP04DA-E2) e ka sebelisoa. Kamora hore DVP02DA-E2 (DVP04DA-E2) e khaotsoe, U SE KE UA ama litheminale life kapa life ka motsotso. Netefatsa hore theminale ea fatše ho DVP02DA-E2 (DVP04DA-E2) e theiloe ka nepo molemong oa ho thibela tšitiso ea motlakase.
Sehlahisoa Profile & Boemo
Wiring ea kantle
Tlhokomeliso 1: Ka kopo, arola lisebelisoa tsa analog le lithapo tse ling tsa motlakase.
Tlhokomeliso 2: Haeba lerata le kena-kenana le theminale ea lithapo tse kentsoeng ke tsa bohlokoa, ka kopo, hokela capacitor le 0.1 ~ 0.47μF 25V bakeng sa ho sefa lerata.
Tlhokomeliso 3: Ka kopo, hokela terminal ea module ea motlakase le terminal ea module ea analog ho sistimi
I/O Terminal Layout
Litlhaloso tsa Motlakase
| Mojule oa Digital/Analog (02D/A & 04D/A) | |
| Phepelo ea motlakase voltage | 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ + 20%) |
| Mojule oa Digital/Analog (02D/A & 04D/A) | |
| Max. rated tshebediso ya matla |
02DA: 1.5W, 04DA: 3W, phepelo ka mohloli oa matla a kantle. |
| Sehokedi | Seteishene se tloaelehileng sa Europe se tlosoang (Pin pitch: 5mm) |
|
Tshireletso |
Moqtagtlhahiso ea e e sirelelitsoe ke potoloho e khutšoanyane. Potoloho e khuts'oane e tšoarellang nako e telele haholo e ka baka tšenyo ho lipotoloho tse kahare. Hajoale tlhahiso e ka
e be potoloho e bulehileng. |
|
Mocheso oa ts'ebetso / polokelo |
Tšebetso: 0°C~55°C (mocheso), 5~95% (mongobo), tšilafalo degree2
Polokelo: -25°C~70°C (mocheso), 5~95% (mongobo) |
| Ho thothomela/ho thothomela | Maemo a machaba: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) |
|
Khokelo ea Series ho DVP-PLC MPU |
Li-module li baloa ho tloha ho 0 ho isa ho 7 ka bohole ho tloha ho MPU. Max. Li-module tse 8 li lumelloa ho hokahana le MPU 'me li ke ke tsa nka lintlha tsa I/O tsa dijithale. |
Litlhaloso tsa Mesebetsi
| Digital/Analog module | Moqtagtlhahiso | Sephetho sa hajoale | |
| Lethathamo la lihlahisoa tsa analoge | -10V ~ 10V | 0 ~ 20mA | 4mA ~ 20mA |
| Lethathamo la phetoho ea dijithale |
-32,000 ~ +32,000 |
0 ~ +32,000 |
0 ~ +32,000 |
| Max./Mits. lethathamo la data ea digital |
-32,768 ~ +32,767 |
0 ~ +32,767 |
-6,400 ~ +32,767 |
| Qeto ea Hardware | 14 likotoana | 14 likotoana | 14 likotoana |
| Max. tlhahiso jwale | 5mA | － | |
| Tolerance load impedance |
1KΩ ~ 2MΩ |
0 ~ 500Ω |
|
| Kanale ea tlhahiso ea analoge | Likanale tse 2 kapa likanale tse 4 / mojule ka mong | ||
| Boiphetetso ba sephetho | 0.5Ω kapa ka tlase | ||
|
Ho nepahala ka kakaretso |
±0.5% ha e le ka tekanyo e felletseng (25°C, 77°F)
± 1% ha ka tekanyo e feletseng ka har'a mefuta e fapaneng ea 0 ~ 55°C (32 ~ 131°F) |
||
| Nako ea ho arabela | 400μs / mocha ka mong | ||
| Sebopeho sa data ea dijithale | 2 e tlatsana le li-bits tse 16 | ||
|
Mokhoa oa ho itšehla thajana |
Optical coupler ho itšehla thajana pakeng tsa li-circuits tsa analog le li-circuits tsa digital. Ha ho khethollo har'a likanale tsa analog.
500VDC pakeng tsa li-circuits tsa digital le Ground 500VDC pakeng tsa li-circuits tsa analog le Ground 500VDC pakeng tsa li-circuits tsa analog le li-circuits tsa digital 500VDC pakeng tsa 24VDC le fatše |
||
Control Register
| CR# | Attrib. | Ngolisa lebitso | Tlhaloso | |
|
#0 |
O |
R |
Lebitso la mohlala |
E thehiloe ke sistimi, khoutu ea mohlala:
DVP02DA-E2 = H'0041; DVP04DA-E2 = H'0081 |
| #1 | O | R | Mofuta oa Firmware | Hlahisa mofuta oa hajoale oa firmware ho hex. |
|
#2 |
O |
R/W |
CH1 tlhophiso ea mokhoa oa tlhahiso |
Mokhoa oa ho tsoa: Kamehla = H'0000. Nka CH1 bakeng sa mohlalaampLe: |
| CR# | Attrib. | Ngolisa lebitso | Tlhaloso | |
|
#3 |
O |
R/W |
CH2 tlhophiso ea mokhoa oa tlhahiso |
Mokhoa 0 (H'0000): Moqtage tlhahiso (±10V) Mokhoa oa 1 (H'0001): Tlhahiso ea hajoale (0~+20mA)
Mokhoa oa 2 (H'0002): Tlhahiso ea hajoale (+4~+20mA) Mokhoa -1 (H'FFFF): Likanale tsohle ha li fumanehe |
|
#4 |
O |
R/W |
CH3 tlhophiso ea mokhoa oa tlhahiso |
|
|
#5 |
O |
R/W |
CH4 tlhophiso ea mokhoa oa tlhahiso |
|
| #16 | X | R/W | CH1 boleng ba lets'oao la tlhahiso | Moqtage tlhahiso mefuta e fapaneng: K-32,000~K32,000. Boemo ba hona joale ba tlhahiso: K0~K32,000.
Ka ho feletseng: K0. CR#18~CR#19 ea DVP02DA-E2 li boloketsoe. |
| #17 | X | R/W | CH2 boleng ba lets'oao la tlhahiso | |
| #18 | X | R/W | CH3 boleng ba lets'oao la tlhahiso | |
| #19 | X | R/W | CH4 boleng ba lets'oao la tlhahiso | |
| #28 | O | R/W | Boleng bo fetotsoeng ba Offset ba CH1 | Beha boleng bo fetotsoeng ba Offset ba CH1 ~ CH4. Kamehla = K0
Tlhaloso ea Offset: Moqtage (ea hona joale) boleng ba ho kenya ha boleng ba tlhahiso ea dijithale = 0 |
| #29 | O | R/W | Boleng bo fetotsoeng ba Offset ba CH2 | |
| #30 | O | R/W | Boleng bo fetotsoeng ba Offset ba CH3 | |
| #31 | O | R/W | Boleng bo fetotsoeng ba Offset ba CH4 | |
| #34 | O | R/W | Phaello e fetotsoeng ea boleng ba CH1 | Beha boleng bo fetotsoeng ba Gain ea CH1 ~ CH4. Ea kamehla = K16,000.
Tlhaloso ea Phaello: Moqtage (ea hona joale) boleng ba ho kenya ha boleng ba tlhahiso ea dijithale = 16,000 |
| #35 | O | R/W | Phaello e fetotsoeng ea boleng ba CH2 | |
| #36 | O | R/W | Phaello e fetotsoeng ea boleng ba CH3 | |
| #37 | O | R/W | Phaello e fetotsoeng ea boleng ba CH4 | |
| Boleng bo Fetositsoeng ba Offset, Boleng bo Fetotsoeng ba Phano:
Tlhokomeliso1: Ha o sebelisa Mode 2, kanale HA E fane ka litlhophiso bakeng sa boleng bo fetotsoeng ba Offset kapa Gain. Tlhokomeliso2: Ha mokhoa oa ho kenya o fetoha, boleng bo fetotsoeng ba Offset kapa Gain bo khutlela mekhoeng ea kamehla. |
||||
| #40 | O | R/W | Mosebetsi: Ho thibetsoe ho fetola boleng | Thibela ho fetoha ha boleng ho CH1 ~ CH4. Ea kamehla= H'0000. |
| #41 | X | R/W | Mosebetsi: Boloka litekanyetso tsohle tse behiloeng | Boloka litekanyetso tsohle tse behiloeng. Kamehla =H'0000. |
| #43 | X | R | Boemo ba phoso | Ngolisa bakeng sa ho boloka boemo bohle ba liphoso. Sheba lethathamo la boemo ba phoso ho fumana lintlha tse ling. |
|
#100 |
O |
R/W |
Mosebetsi: Etsa / Thibela ho lemoha moeli | Ho fumanoa ha moeli o ka holimo le o tlaase, b0~b3 e lumellana le CH1~CH4 (0: Disable/ 1: Noble). Ea kamehla= H'0000. |
|
#101 |
X |
R/W |
Boemo bo tlanngoeng ka holimo le bo tlase |
Hlahisa boemo bo tlanngoeng ka holimo le bo tlase. (0: Ha e fete / 1: E feta boleng bo holimo kapa bo tlaase), b0 ~ b3 e lumellana le Ch1 ~ Ch4 bakeng sa sephetho sa ho fumanoa ka tlaase; b8~b11 e lumellana le CH1~CH4 bakeng sa holimo
sephetho sa boundary discovery.. |
| #102 | O | R/W | Beha boleng ba CH1 ho ea holimo |
Beha boleng ba CH1~CH4 ho ea holimo. Ea kamehla = K32000. |
| #103 | O | R/W | Beha boleng ba CH2 ho ea holimo | |
| #104 | O | R/W | Beha boleng ba CH3 ho ea holimo | |
| #105 | O | R/W | Beha boleng ba CH4 ho ea holimo | |
| #108 | O | R/W | Beha boleng ba CH1 moeli o tlase |
Beha boleng ba CH1~CH4 setlamo se tlase. Ea kamehla = K-32000. |
| #109 | O | R/W | Beha boleng ba CH2 moeli o tlase | |
| #110 | O | R/W | Beha boleng ba CH3 moeli o tlase | |
| #111 | O | R/W | Beha boleng ba CH4 moeli o tlase | |
| #114 | O | R/W | Nako ea ntlafatso ea tlhahiso ea CH1 | Beha boleng ba CH1~CH4 setlamo se tlase. Tlhophiso |
| CR# | Attrib. | Ngolisa lebitso | Tlhaloso | |
| #115 | O | R/W | Nako ea ntlafatso ea tlhahiso ea CH2 | mefuta: K0~K100. Kamehla =H'0000. |
| #116 | O | R/W | Nako ea ntlafatso ea tlhahiso ea CH3 | |
| #117 | O | R/W | Nako ea ntlafatso ea tlhahiso ea CH4 | |
|
#118 |
O |
R/W |
Tlhophiso ea mokhoa oa tlhahiso ea LV |
Beha mokhoa oa tlhahiso ea CH1 ~ CH4 ha matla a le LV (voltage) boemo.
Ea kamehla= H'0000. |
| Matšoao:
O: Ha CR#41 e behiloe ho H'5678, boleng bo behiloeng ba CR bo tla bolokoa. X: boleng bo behiloeng bo ke ke ba bolokoa. R: e khona ho bala data ka ho sebelisa taelo ea HO TSOA. W: o khona ho ngola lintlha ka ho sebelisa litaelo tsa TO. |
||||
| Tlhaloso | |||||
|
bit0 |
K1 (H'1) |
Phoso ea phepelo ea motlakase |
bit11 |
K2048(H'0800) |
Phoso ea maemo a holimo / a tlase |
|
bit1 |
K2 (H'2) |
Reserved |
bit12 |
K4096(H'1000) |
E thibetsoe ho fetola boleng |
|
bit2 |
K4 (H'4) |
Phoso e kaholimo / e tlase |
bit13 |
K8192(H'2000) |
Karohano ea puisano mojuleng o latelang |
| bit9 | K512(H'0200) | Phoso ea ho seta mokhoa | |||
| $Tlhokomeliso: Boemo bo bong le bo bong ba phoso bo khethoa ke karolo e tsamaisanang le eona (b0 ~ b13) mme ho ka ba le liphoso tse fetang 2 tse hlahang ka nako e le 'ngoe. 0 = e tloaelehileng; 1 = phoso | |||||
Reset ea Mojule (ea fumaneha bakeng sa firmware V1.12 kapa ka holimo): Ha li-module li hloka ho seta bocha, ngola H'4352 ho CR#0, ebe u emela motsotsoana o le mong ebe o tima ebe o qala bocha. Taelo e qala litlhophiso tsohle tsa parameter. E le ho qoba ts'ebetso ea ho tsosolosa e amang ts'ebetso e tloaelehileng ea li-module tse ling, ho kgothaletswa ho kopanya modula o le mong feela ka nako.
Tlhaloso ka Lirekoto tse Khethehileng D9900~D9999
Ha DVP-ES2 MPU e hokahane le li-module, lirejisete tsa D9900~D9999 li tla bolokeloa ho boloka boleng ho tsoa ho li-module. U ka sebelisa litaelo tsa MOV ho sebelisa litekanyetso ho D9900~D9999.
Ha ES2 MPU e hokahane le DVP02DA-E2/DVP04DA-E2, tlhophiso ea lirejisetara tse khethehileng e tjena ka tlase:
| #0 | #1 | #2 | #3 | #4 | #5 | #6 | #7 |
Tlhaloso |
| D1320 | D1321 | D1322 | D1323 | D1324 | D1325 | D1326 | D1327 | Khoutu ea Mohlala |
| D9900 | D9910 | D9920 | D9930 | D9940 | D9950 | D9960 | D9970 | CH1 boleng ba tlhahiso |
| D9901 | D9911 | D9921 | D9931 | D9941 | D9951 | D9961 | D9971 | CH2 boleng ba tlhahiso |
| D9902 | D9912 | D9922 | D9932 | D9942 | D9952 | D9962 | D9972 | CH3 boleng ba tlhahiso |
| D9903 | D9913 | D9923 | D9933 | D9943 | D9953 | D9963 | D9973 | CH4 boleng ba tlhahiso |
Fetosa D/A Phetoho Curve
Basebedisi ba ka fetola li-curve tsa phetoho ho latela litlhoko tsa sebele ka ho fetola boleng ba Offset (CR#28 ~ CR#31) le Gain value (CR#34 ~ CR#37).
Fumana phaello: Moqtage / boleng ba hona joale ba tlhahiso ha boleng ba tlhahiso ea dijithale = 16,000.
Offset: Moqtage / boleng ba hona joale ba tlhahiso ha boleng ba tlhahiso ea dijithale = 0.
- Equation bakeng sa voltage tlhahiso Mode0: 0.3125mV = 20V/64,000
| Mokhoa 0 (CR#2 ~ CR#5) | -10V ~ +10V, Phaello = 5V (16,000), Offset = 0V (0) |
| Lethathamo la data ea dijithale | -32,000 ~ +32,000 |
| Max./Mits. lethathamo la data ea digital | -32,768 ~ +32,767 |
- Sephetho sa hajoale - mokhoa oa 1:
| Mokhoa 1 (CR#2 ~ CR#5) | 0mA ~ +20mA, Phaello = 10mA (16,000), Offset = 0mA (0) |
| Lethathamo la data ea dijithale | 0 ~ +32,000 |
| Max./Mits. lethathamo la data ea digital | 0 ~ +32,767 |
Sephetho sa hajoale - mokhoa oa 2:
| Mokhoa 2 (CR#2 ~ CR#5) | 4mA ~ +20mA, Phaello = 12mA (19,200), Offset = 4mA (6,400) |
| Lethathamo la data ea dijithale | 0 ~ +32,000 |
| Max./Mits. lethathamo la data ea digital | -6400 ~ +32,767 |
Litokomane / Lisebelisoa
 |
DELTA DVP02DA-E2 ES2-EX2 Letoto la Sehlahisoa sa Analog [pdf] Buka ea Taelo DVP02DA-E2 ES2-EX2 Series Input Module, DVP02DA-E2, ES2-EX2 Series Input Module, Analog Input Module, Input Module, Output Module, Mojule |
