Autonics TZN Series Dual Speed PID Temperature Controllers
Tlhahisoleseding ya Sehlahiswa
The Dual-Speed PID Temperature Controllers TZ/TZN Series ke sesebelisoa se sebelisoang ho laola mocheso liindastering tse fapaneng tse kang taolo ea matla a nyutlelie, lisebelisoa tsa bongaka, likepe, likoloi, literene, lifofane, lisebelisoa tse tukang, lisebelisoa tsa polokeho, lisebelisoa tsa thibelo ea botlokotsebe / likoluoa, joalo-joalo. Sesebelisoa se na le likarolo tse sa sireletsehang tse tlamehang ho kengoa ha ho sebelisoa yuniti e nang le mochini o ka bakang kotsi e mpe kapa tahlehelo e kholo ea moruo. Sesebelisoa se na le tataiso e pepeneneng 'me se sebetsa ho laola PID ea lebelo le habeli (Proportional-Integral-Derivative).
Mehopolo ea Tšireletseho
Ho bohlokoa ho latela lintlha tsa polokeho tse fanoeng bukeng ea litaelo ho thibela kotsi ea motho, tahlehelo ea moruo kapa mollo. Tsena li kenyelletsa:
- Ho kenya lisebelisoa tse sa sireletsehang ha u sebelisa mochini o nang le mochini o ka bakang kotsi e mpe kapa tahlehelo e kholo ea moruo.
- Ho qoba tšebeliso ea yuniti libakeng tseo ho nang le khase e tukang, e phatlohang/e senyang, mongobo o phahameng, mahlaseli a letsatsi, mocheso o khanyang, ho thothomela, tšusumetso kapa letsoai.
- Ho kenya yuniti ka nepo ho phanele ea sesebelisoa.
- Ho qoba ho hokela, ho lokisa kapa ho hlahloba yuniti ha e ntse e hokahantsoe le mohloli oa matla.
- Ho hlahloba likhokahano pele u kenya mohala le ho sebelisa yuniti ka har'a lintlha tse hlophisitsoeng.
- Ho qoba ho qhaqholla kapa ho fetola yuniti.
- Ho sebelisa lesela le omeletseng ho hloekisa yuniti le ho qoba tšebeliso ea metsi kapa mokelikeli oa lintho tse phelang.
- Ho boloka sehlahisoa se le hole le chip ea tšepe, lerōle le masalla a terata a ka phallang ka har'a yuniti.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho sebelisa ka nepo Li-Double-Speed PID Temperature Controllers TZ / TZN Series:
- Sheba libuka le lintlha tsa polokeho tse fanoeng bukeng ea litaelo ho netefatsa tšebeliso e nepahetseng ea sehlahisoa.
- Khoasolla libuka le ho kenya files ho tsoa ho Autonics websebaka.
- Hokela motlakase le tlhahiso ea relay ka thapo ea AWG 20 (0.50 mm2) kapa ho feta, 'me u hatelle sekoere sa theminale ka torque e tiisang ea 0.74 ho isa ho 0.90 N m.
- Hokela thapo ea sensor le thapo ea puisano ntle le thapo e inehetseng u sebelisa thapo ea AWG 28 ho isa ho 16 'me u tiise screw ea "terminal" ka torque e tiisang ea 0.74 ho isa ho 0.90 N m.
- Sebelisa yuniti ka har'a lintlha tse reriloeng ho qoba tšenyo ea mollo kapa sehlahisoa.
- Hloekisa yuniti ka lesela le omeletseng feela 'me u e boloke hole le chip ea tšepe, lerōle le masalla a terata a phallang ka har'a yuniti.
Ho latela litaelo tsena ho tla thusa ho netefatsa ts'ebeliso e nepahetseng le bophelo bo bolelele ba Dual-Speed PID Temperature Controllers TZ / TZN Series.
Rea leboha ka ho khetha sehlahisoa sa rona sa Autonics.
- Bala 'me u utloisise bukana ea litaelo le tataiso ka botlalo pele u sebelisa sehlahisoa.
- Bakeng sa polokeho ea hau, bala le ho latela lintlha tse ka tlase tsa polokeho pele u li sebelisa. Bakeng sa polokeho ea hau, bala 'me u latele lintlha tse ngotsoeng bukeng ea litaelo, libuka tse ling le Autonics websebaka.
- Boloka bukana ena ea litaelo sebakeng seo u ka se fumanang habonolo.
- Litlhaloso, litekanyo, joalo-joalo li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea sehlahisoa Mefuta e meng e ka emisoa ntle le tsebiso.
- Latela Autonics websaete bakeng sa tlhaiso-leseling ea morao-rao.
Mehopolo ea Tšireletseho
- Ela hloko 'Lintlha tsa Tšireletso' bakeng sa ts'ebetso e sireletsehileng le e nepahetseng ho qoba likotsi.
- letshwao le bontsha tlhokomediso ka baka la maemo a ikgethileng ao dikotsi di ka hlahang ho ona.
Tlhokomeliso: Ho hloleha ho latela litaelo ho ka baka kotsi e mpe kapa lefu
- Sesebediswa se sa sireletsehang se tlameha ho kenngwa ha o sebedisa yuniti e nang le metjhini e ka bakang kotsi e kgolo kapa tahlehelo e kgolo ya moruo.(mohlala, taolo ya matla a nyutlelie, thepa ya bongaka, dikepe, makoloi, diporo, difofane, disebediswa tse tukang, disebediswa tsa polokeho, thibelo ya botlokotsebe/dikoduwa. lisebelisoa, joalo-joalo) Ho hloleha ho latela taelo ena ho ka baka kotsi ea botho, tahlehelo ea moruo kapa mollo.
- Se ke oa sebelisa yuniti sebakeng seo ho nang le khase e tukang, e ka qhomang/e senyang, mongobo o phahameng, mahlaseli a letsatsi, mocheso o khanyang, thothomelo, tšusumetso kapa letsoai.
Ho hloleha ho latela taelo ena ho ka baka ho phatloha kapa mollo. - Kenya ho phanele ea sesebelisoa ho e sebelisa.
Ho hloleha ho latela taelo ena ho ka baka ts'oaetso ea motlakase. - Se ke oa hokela, ho lokisa, kapa ho hlahloba yuniti ha o ntse o hoketsoe mohloling oa motlakase.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase. - Sheba 'Likhokahano' pele u kenya mohala.
Ho hloleha ho latela taelo ena ho ka baka mollo. - Se ke oa qhaqha kapa oa fetola yuniti.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase.
Tlhokomeliso: Ho hloleha ho latela litaelo ho ka baka kotsi kapa tšenyo ea sehlahisoa
- Ha o hokela tlhahiso ea matla le tlhahiso ea relay, sebelisa thapo ea AWG 20 (0.50 mm2) kapa ho feta, 'me u hatelle sekoahelo sa terminal ka torque e tiisang ea 0.74 ho isa ho 0.90 N m.
Ha o hokela thapo ea sensor le thapo ea puisano ntle le thapo e inehetseng, sebelisa thapo ea AWG 28 ho isa ho 16 'me u tiise screw sa terminal ka torque e tiisang ea 0.74 ho isa ho 0.90 N m.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ho se sebetse hantle ka lebaka la ho hloleha ho kopana. - Sebelisa yuniti ka har'a lintlha tse reriloeng.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa - Sebelisa lesela le omeletseng ho hloekisa yuniti, 'me u se ke ua sebelisa metsi kapa motsoako oa tlhaho. Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase.
- Beha sehlahiswa hole le chip, lerole, le masalla a terata a kenang yuniti.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa.
Litemoso nakong ea Tšebeliso
- Latela litaelo ho 'Litemoso nakong ea Tšebeliso'. Ho seng joalo, e ka baka likotsi tse sa lebelloang.
- Sheba polarity ea li-terminals pele u kenya sensara mocheso. Bakeng sa sensor ea mocheso oa RTD, e kenye terata joalo ka mofuta oa terata e 3, o sebelisa likhoele ka botenya le bolelele bo lekanang. Bakeng sa sensor ea mocheso oa thermocouple (TC), sebelisa terata e behiloeng bakeng sa ho atolosa mohala.
- Boloka hole le molumo o phahamengtaglithapo tsa e kapa lithapo tsa motlakase ho thibela lerata le kenang. Haeba u kenya mohala oa motlakase le mohala oa lets'oao haufi-ufi, sebelisa sefahla sa mohala kapa varistor mothapong oa motlakase le terata e sirelelitsoeng moleng oa lets'oao la ho kenya. Se ke oa sebelisa haufi le sesebelisoa se hlahisang matla a matla a makenete kapa lerata le phahameng la maqhubu.
- Kenya sesebelisoa sa motlakase kapa sekhechana sa potoloho sebakeng se fumanehang habonolo bakeng sa ho fana kapa ho hakolla motlakase.
- Se ke oa sebelisa yuniti molemong o mong (mohlala, voltmeter, ammeter), empa taolo ea mocheso.
- Ha o fetola senotlolo sa ho kenya, tima motlakase pele o fetoha. Ka mor'a ho fetola senotlolo sa ho kenya, fetola boleng ba parameter e tsamaellanang.
- Se ke oa tlola mola oa puisano le mohala oa motlakase. Sebelisa terata e sothehileng bakeng sa mohala oa puisano 'me u hokele sefaha sa ferrite ntlheng e ngoe le e ngoe ea mohala ho fokotsa litlamorao tsa lerata le kantle.
- Etsa sebaka se hlokehang ho potoloha yuniti bakeng sa mahlaseli a mocheso. Bakeng sa litekanyo tse nepahetseng tsa mocheso, futhumatsa sesebelisoa ho feta metsotso e 20 kamora ho bulela motlakase.
- Etsa bonnete ba hore phepelo ea motlakase voltage fihla ho vol e lekantsoengtage kamora metsotsoana e 2 kamora ho fana ka matla.
- Se ke oa ts'oara terata ho li-terminals tse sa sebelisoang.
- Sehlopha sena se ka sebelisoa maemong a latelang.
- - Ka tlung (boemong ba tikoloho e lekantsoeng ho 'Specifications')
- - Altitude Max. 2,000 m
- – Tekanyo ea tšilafalo 2
- - Sehlopha sa ho kenya II
Ho Odara Boitsebiso
Sena ke sa litšupiso feela, sehlahisoa sa 'nete ha se tšehetse metsoako eohle. Bakeng sa ho khetha mofuta o boletsoeng, latela Autonics websebaka.
Khetho ea khetho
| PN | Sephetho sa khetho 1 | Sephetho sa khetho 2 |
| 1 | Ketsahalo | - |
| 2 | Ketsahalo | Ketsahalo |
| R | Ketsahalo | Phetiso ea PV |
| T | Ketsahalo | Puisano |
| A | Ketsahalo | Ketsahalo + Phetiso ea PV |
| B | Ketsahalo | Ketsahalo + Puisano |
Bukana
- Bakeng sa tšebeliso e nepahetseng ea sehlahisoa, sheba libuka tsa litaelo 'me u be le bonnete ba hore u latela lintlha tsa polokeho libukeng tsa litaelo.
- Khoasolla libuka tse tsoang ho Autonics websebaka.
Software
Khoasolla ho kenya file le libuka tse tsoang ho Autonics websebaka
DAQMaster
DAQMaster ke lenaneo le felletseng la taolo ea lisebelisoa. E fumaneha bakeng sa ho beha paramente, ho beha leihlo.
Lisebelisoa tsa Sehlahisoa
- Sehlahisoa, borakete × 2 [TZ4SP, TZ4ST, TZN4S] Sehlahisoa (+ borakete)
- Buka ea litaelo
- Setikara sa yuniti
Rekiswa ka thoko
- 11 pin socket: PG-11, PS-11 (N)
- Puisano converter: Sehlopha sa SCM
Litlhaloso
| Letoto | Letoto la TZ/TZN | |
| Phepelo ea motlakase | 100 - 240 VAC 50/60 Hz ±10% | |
| Tšebeliso ea matla | ≤ 6 VA, TZ4SP, TZ4ST, TZN4S: ≤ 5 VA | |
| Sampnako ea ling | 500 ms | |
| Lintlha tse kentsoeng | Sheba 'Mofuta oa Input le Using Range'. | |
| Bontša ho nepahala | FS ±0.3% kapa 3℃ e phahameng | |
|
Laola tlhahiso |
Relay | 250 VAC 3 A, 30 VDC 3 A 1c |
| SSR | 12 VDC ± 3 V, ≤ 30 mA | |
| Hona joale | DC 4-20 mA, ho hanyetsa mojaro: ≤ 600 Ω | |
|
Khetho ea khetho |
Ketsahalo ea 1/2 | 250 VAC 1A 1a |
| PV
Phetiso |
DC 4 - 20 mA, ho hanyetsa mojaro: ≤ 600 Ω | |
| Comm. | RS485 | |
| Mofuta oa ponts'o | 7 Karolo (e khubelu, e tala), mofuta oa LED | |
| Mofuta oa taolo | ON/OFF, P, PI, PD, PIDF, PIDS control | |
| Alarm output Hysteresis | 1 ho 100 (0.1 ho 100.0) ℃ | |
| Sehlopha se lekanang (P) | 0.0 ho isa ho 100.0% | |
| Nako ea bohlokoa (I) | 0 ho isa ho 3,600 sec | |
| Nako ea tlhahiso (D) | 0 ho isa ho 3,600 sec | |
| Control cycle (T) | 1 ho isa ho 120 sec | |
| Litlhophiso tsa LBA | 1 ho isa ho 999 sec | |
| RAMP tlhophiso | Ramp Tsoha, Ramp Ho theoha: 1 ho isa ho 99 min | |
|
Relay bophelo potoloho |
Mechini | • Laola tlhahiso: ≥ 10,000,000 ts'ebetso
• Tlhahiso ea khetho: ≥ 20,000,000 ts'ebetso |
|
Motlakase |
• Laola tlhahiso: ≥ 100,000 ts'ebetso (ho hanyetsa mojaro: 250 VAC 3 A)
• Tlhahiso ea khetho: ≥ 500,000 ts'ebetso (ho hanyetsa boima: 250 VAC 1 A) |
|
| Matla a dielectric | Pakeng tsa terminal ea ho kenya le motlakase: 2,000 VAC 50/60 Hz
bakeng sa 1 mets |
|
| Ho thothomela | 0.75 limilimithara amplitude ka makhetlo a 10 ho isa ho 55Hz (bakeng sa 1min) ka lehlakoreng le leng le le leng la X, Y, Z bakeng sa lihora tse 2 | |
| Ho thothomela ho sa sebetseng hantle | 0.5 limilimithara amplitude ka makhetlo a 10 ho isa ho 55Hz (bakeng sa 1min) ka lehlakoreng le leng le le leng la X, Y, Z bakeng sa lihora tse 2 | |
| Insulation resistance | ≥ 100 MΩ (500 VDCᜡ megger) | |
| Ho itšireletsa mafung | ± 2 kV lerata la sebopeho sa lisekoere ka simulator ea lerata (pulse wide 1 ㎲ ) R-mohato, S-mohato | |
| Ho boloka mohopolo | ≈ lilemo tse 10 (mofuta oa mohopolo o sa fetoheng oa semiconductor) | |
| Mocheso oa tikoloho | -10 ho 50 ℃, polokelo: -20 ho 60 ℃ (ha ho leqhoa kapa condensation) | |
| Mongobo wa tikoloho | 35 ho 85% RH, polokelo: 35 ho 85% RH (ha ho leqhoa kapa condensation) | |
| Kamohelo | ||
|
Boima ba yuniti (e phuthetsoe) |
• TZ4SP: ≈ 144 g (≈ 205 g) • TZN4S: ≈ 164 g (≈ 226 g)
• TZ4ST: ≈ 162 g (≈ 218 g) • TZN4M: ≈ 246 g (≈ 355 g) • TZ4M: ≈ 228 g (≈ 360 g) • TZN4W: ≈ 232 g (≈ 351 g) • TZ4W: ≈ 246 g (≈ 365 g) • TZN4H: ≈ 232 g (≈ 351 g) • TZ4H: ≈ 246 g (≈ 365 g) • TZN4L: ≈ 303 g (≈ 474 g) • TZ4L: ≈ 304 g (≈ 474 g) |
|
Sehokelo sa Puisano
RS485
| Comm. melaoana | BCC |
| Tekanyetso ea kopo | EIA RS485 ho latela |
| Khokahano e phahameng | Li-unit tsa 31 (aterese: 01 ho isa ho 99) |
| Mokhoa o lumellanang | Asynchronous |
| Comm. mokhoa | Terata e habeli ea terata e habeli |
| Comm. e sebetsang hantle mefuta-futa | ≤ 1,200 limithara |
| Comm. lebelo | 2,400 / 4,800 / 9,600 bps (parameter) |
| Qala hanyane | 1 bit (e tsitsitseng) |
| Boitsebiso bo fokolang | 8 bit (e tsitsitseng) |
| Parity hanyane | Ha ho letho |
| Emisa hanyane | 1 bit (e tsitsitseng) |
| EEPROM potoloho ea bophelo | ≈ 1,000,000 ts'ebetso (Hlakola / Ngola) |
Mofuta oa ho Kena le Range ea ho Sebelisa
Lethathamo la li-setting tsa li-parameter tse ling li na le moeli ha u sebelisa pontšo ea lintlha tsa decimal.
Peakanyo ya Mofuta wa Kenyo
Ka kopo, lokisa li-switches tsa ka hare pele u fana ka motlakase. Ka mor'a ho fana ka matla, lokisa 'Mofuta oa Input' e le boleng bo tšoanang.
Ho hlakisa nyeoe
Litlhaloso tsa Yuniti
Karolo ea PV Display (e khubelu)
- Mokhoa oa UN: E bonts'a PV (theko ea hajoale)
- Mokhoa oa ho beha: E hlahisa lebitso la parameter
Karolo ea SV Display (botala)
- Mokhoa oa UN: E bonts'a SV (boleng ba maemo)
- Mokhoa oa ho beha: E bonts'a boleng ba litlhophiso tsa parametha
Sesupo
| Pontšo | Lebitso | Tlhaloso |
| SV2 | Ts'ebetso ea SV2 | E BUA nakong ea ts'ebetso ea SV2 |
| AT | Tokiso ea boiketsetso | Flash nakong ea tokiso ea auto |
|
TSOA |
Laola ts'ebetso ea tlhahiso |
E BUA ha tlhahiso ea taolo e BUTSE.
Ha e sebetse nakong ea taolo tlhahiso ke tlhahiso ea hajoale |
| EA-1-TSE | Ketsahalo ea 1 tlhahiso | E BUA ha Ketsahalo e le 1/2
Sehlahisoa se BUTSE |
| EA-2-TSE | Ketsahalo ea 2 tlhahiso |
Senotlolo sa ho laola
| Pontšo | Lebitso |
| [MD] | Senotlolo sa mode |
| [AT] | Konopo ea ho etsa tokiso ka boits'oaro |
| [◀], [▶], [▼], [▲] | Ho beha senotlolo sa ho laola boleng
• Senotlolo mothalong o nang le matheba ([▶]) ke feela bakeng sa TZ4M, TZN4M, TZ4L, TZN4L Series. |
Chate ea tokiso ea bohlokoa
| Pontšo | Tlhaloso | Ho batle phoso |
|
BULETSE |
E benya ka nako ea metsotsoana e 0.5 ha ho
Sensor e robehile kapa e khaotsoe. |
Hlahloba boemo ba kutlo ea kutlo. |
|
HHHH |
E benya ha PV e phahame ho feta sebaka sa ho kenya. |
Ha kenyelletso e le kahara palo e kalohileng ea ho kenya, pontšo ena ea nyamela. |
|
TLHALA |
E benya ha PV e le tlase ho feta sebaka se kenang. | |
|
ERR0 |
E khanya ha chip e ka hare e senngoa ke lerata le matla (~ 2,000 VAC). | Fumana mohloli oa lerata 'me u lokise mehato ea ho loantša.
Ka kopo ikopanye le tšehetso ea rona ea tekheniki. |
|
- |
Haeba ho se na tlhahiso ho RUN mode |
Haeba sesupo sa tlhahiso ea taolo se sa sebetse, hlahloba litlhophiso tsa paramethara. |
| Haeba lets'oao la tlhahiso ea taolo le ntse le sebetsa, tlosa mohala ho tloha setsing sa sephetho sa taolo ea mocheso 'me u hlahlobe se hlahisoang (lebitso la replay, SSR drive, hajoale) |
Litekanyo
- Yuniti: mm, Bakeng sa litšoantšo tse qaqileng, latela Autonics websebaka.
- Ka tlase ho ipapisitsoe le TZ4ST Series.
Brakete
Letoto la TZ4ST, TZ4SP, TZN4S
TZ4L, TZN4L, TZ4M, TZ4H, TZN4H, TZ4W, TZN4W Series
Lihokelo
Litlhaloso tsa Crimp Terminal
- Yuniti: mm, Sebelisa terminal ea crimp ea sebopeho sa ho latela.
Mode Setting
Tlhophiso ea Parameter
- Li-parameter tse ling li kentsoe tšebetsong / ha li sebetse ho latela mohlala kapa litlhophiso tsa liparamente tse ling. Sheba litlhaloso tsa ntho e 'ngoe le e 'ngoe.
- [MD] senotlolo: E-ea nthong e latelang ka mor'a ho boloka / Khutlela ho RUN mode ka mor'a ho boloka (≥ 3 sec) [◀] senotlolo: Khetha parameter / Tsamaisa linomoro / Khutlela boemong bo ka holimo ntle le ho boloka (≥ 2 sec) / Khutlela ho RUN mokhoa ntle le ho boloka (≥ 3 sec) [▲], [▼] senotlolo: Khetha parameter / Fetola boleng ba maemo
- Khutlela boemong bo ka holimo ntle le ho boloka ha ho se na senotlolo bakeng sa metsotsoana e fetang 30.
- Range ho masaka '( )' ke mofuta oa litlhophiso ha boleng bo behiloeng ba paramethara ea 'input specification' bo sebelisoa le ntlha e le 'ngoe ea decimal.
- Tatelano ea litlhophiso tse khothalelitsoeng: Sehlopha sa 2 sa Paramethara → Sehlopha sa 1 sa sehlopha → mokhoa oa ho beha SV
Sehlopha sa 1 sehlopha
| Paramethara | Pontšo | Ea kamehla | Setting range | Boemo |
| 1-1 SV2 kemiso | SU-2 | 0 | Sheba 'Mofuta oa Input le Using Range'. | - |
| 1-2 Ketsahalo ea 1 alamo
mocheso |
AL1 | 10 | Sheba 'Mofuta oa Input le Using Range'. |
Ketsahalo ea 2-2/3 1/2: AL-1 ho isa ho 6 |
| 1-3 Ketsahalo ea 2 alamo
mocheso |
AL2 | 10 | [Khetho ea 2: Mohlala oa ketsahalo]
Sheba 'Mofuta oa Input le Using Range'. |
|
| 1-4 LBA nako | LBA | 600 | [Relay, SSR drive output model]
0 ho isa ho 999 sec |
Ketsahalo ea 2-2/3
1/2: LBA |
| 1-5 Phallo ea alamo
hysteresis |
AHYS | 2 | 1 ho 100 (0.1 ho 100.0) ℃/℉ | Ketsahalo ea 2-2/3
1/2: AL-1 ho isa ho 6 |
| 1-6 Ka tekano
sehlopha |
P | #0 | 0.0 (taolo ea ON/OFF) ho isa ho 100.0% | - |
| 1-7 Nako ea bohlokoa | I | 0 | 0 (OFF) ho isa ho 3,600 sec |
1-6 Sehlopha se leka-lekaneng: ~ 0.0 |
| 1-8 Nako ea ho tsoa | D | 0 | 0 (OFF) ho isa ho 3,600 sec | |
|
1-9 Potoloho ea taolo |
T |
20 |
[Relay, SSR drive output model]
1 ho isa ho 120 sec • Beha boleng bo fokolang ho SSR drive mehlala ea tlhahiso. (mohlala, metsotsoana e 2) |
|
|
1-10 Hysteresis |
HYS |
2 |
1 ho 100 (0.1 ho 100.0) ℃/℉ |
1-6
Tekano sehlopha: 0.0 |
| 1-11 Kenyeletso
tokiso |
KA-B | 0 | -49 ho isa ho 50 (-50.0 ho isa ho 50.0) ℃/℉ | - |
|
1-12 Ho seta bocha ka letsoho |
PHOMOLO |
)0 |
0.0 ho isa ho 100% |
1-6
Sehlopha se lekanang: ~ 0.0 1-7/8 E kopaneng/ E nkiloeng nako:0 |
| 1-13 RAMP nako e felile | RAPU | 10 | 1 ho isa ho 99 mots | 2-14 RAMP
mosebetsi: ON |
| 1-14 RAMP nako ea ho theola | RAPD | 10 | ||
|
1-15 Senotlolo |
LOC |
TLOA |
TLOA
ON: Senotlolo sa sehlopha sa Parameter 1 ON1: Sehlopha sa 1 sa Paramethara + [AT] senotlolo sa senotlolo |
- |
Sehlopha sa 2 sehlopha
| Paramethara | Pontšo | Ea kamehla | Setting range | Boemo |
| 2-1 Lintlha tse kentsoeng. | IN-T | KCaH | Sheba 'Mofuta oa Input le Using Range'. | - |
|
2-2 Ketsahalo ea 1 |
EA-1 |
AL-1 |
AL-0: E tima
AL-1: Alamo ea ho kheloha e phahameng AL-2: Alamo ea ho kheloha moeli o tlase AL-3: Alamo e khelohileng e holimo, e tlase AL-4: Alamo e khelohileng holimo, e tlase e khutlelang morao AL-5: Alamo ea boleng bo holimo ea moeli o phahameng AL-6: Alamo ea boleng bo tlase ea moeli SBA: Alamo ea khefutso ea sensor LBA: Alamo ea Loop break (LBA) |
- |
| 2-3 Ketsahalo ea 2 | EA-2 | AL-2 | [Khetho ea 2: Mohlala oa ketsahalo] E ts'oana le Ketsahalo ea 2-2 ea 1 | |
|
2-4 Kgetho ya alamo |
AL-T |
AL-A |
AL-A: Alamo e tloaelehileng AL-B: Lesela la alamo
AL-C: Tatelano e emeng AL-D: Latch ea alamo le tatelano ea standby |
Ketsahalo ea 2-2/3 1/2: AL-1 ho isa ho 6 |
| 2-5 Tokiso ea boiketsetso
mokgoa |
AtT | TVN1 | TUN1: Tokiso e thehiloeng ho SV
TUN2: Tokiso e ipapisitse le 70% ea SV |
- |
| 2-6 mofuta oa PID | PIDT | PIdS | PID.S: Karabelo e tlase ea lebelo
PID.F: Karabelo e phahameng ea lebelo |
- |
|
2-7 Laola tlhahiso ea mokhoa |
O-FT |
MOCHESO |
MOCHESO: Ho futhumala, pholile: Ho pholile
• Ka kopo, seta ho latela ts'ebeliso ea taolo. Se ke oa fetola li-setting nakong ea ts'ebetso. E ka fella mollong kapa dikotsing. |
- |
| 2-8 Mocheso
unit |
THUTO | ?C | ℃, ℉ | - |
| 2-9 SV moeli o phahameng | H-SC | 1300 | Ka har'a sebaka sa ho kenya
Sheba 'Mofuta oa Input le Using Range'. |
- |
| 2-10 SV moeli o tlase | L-SC | `00 | - | |
|
2-11 Ntlha ea Decimal |
LETLOTLO |
0 |
0, 0.0, 0.00, 0.000 |
2-1 Lintlha tse kentsoeng. : Analogue |
| Phetiso
2-12 sephetho se phahameng moeli |
FS-H |
1300 |
[Sephetho sa khetho ea 2: PV Trans. mohlala]
Ka har'a sebaka sa ho kenya Sheba 'Mofuta oa Input le Using Range'. |
- |
| Phetiso
2-13 sephetho se tlase moeli |
FS-L |
`00 |
||
| 2-14 RAMP tshebetso | RAMP | TLOA | TIMA, TS'OELE | - |
| 2-15 Comm. lebelo | BPS | 2400 | [Sephetho sa khetho ea 2: Comm. mohlala] 2400, 4800, 9600 bps | - |
| 2-16 Comm.
aterese |
LIEKETSENG | 01 | [Sephetho sa khetho ea 2: Comm. mohlala] 1 ho isa ho 99 | - |
| 2-17 Senotlolo | LOC | TLOA | TIMA, ON: Senotlolo sa sehlopha sa Parameter 2 | - |
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Rephabliki ea Korea, 48002
www.autonics.com | +82-2-2048-1577 | thekiso@autonics.com
Litokomane / Lisebelisoa
 |
Autonics TZN Series Dual Speed PID Temperature Controllers [pdf] Buka ea Taelo TZN4L-B4S, TZN Series, TZ Series Dual Speed PID Temperature Controllers, Dual Speed PID Temperature Controllers, PID Temperature Controllers, Ba laolang mocheso |
