Autonics TC Series TC4Y-N4R Single Display PID Taolo ea Litaolo tsa Mocheso
Bala 'me u utloisise bukana ea litaelo le tataiso ka botlalo pele u sebelisa sehlahisoa.
Bakeng sa polokeho ea hau, bala 'me u latele lintlha tse ka tlase tsa polokeho pele u li sebelisa.
Bakeng sa polokeho ea hau, bala 'me u latele lintlha tse ngotsoeng bukeng ea litaelo, libuka tse ling le Autonics websebaka.
Boloka bukana ena ea litaelo sebakeng seo u ka se fumanang habonolo.
Litlhaloso, litekanyo, joalo-joalo li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea sehlahisoa Mefuta e meng e ka emisoa ntle le tsebiso.
Litaba
pata
Mehopolo ea Tšireletseho
- Ela hloko 'Lintlha tsa Tšireletso' bakeng sa ts'ebetso e sireletsehileng le e nepahetseng ho qoba likotsi.
- ᜠ letšoao le bontša tlhokomeliso ka lebaka la maemo a khethehileng ao ho ka hlahang likotsi.
Tlhokomediso Ho hlōleha ho latela litaelo ho ka baka kotsi e tebileng kapa lefu
- Sesebelisoa se sa sireletsehang se tlameha ho kengoa ha ho sebelisoa mochini o nang le mochini o ka bakang kotsi e kholo kapa tahlehelo e kholo ea moruo. lisebelisoa, joalo-joalo)
Ho hloleha ho latela taelo ena ho ka baka kotsi, tahlehelo ea moruo kapa mollo. - Se ke oa sebelisa yuniti sebakeng seo ho nang le khase e tukang, e ka qhomang/e senyang, mongobo o phahameng, mahlaseli a letsatsi, mocheso o khanyang, thothomelo, tšusumetso kapa letsoai.
Ho hloleha ho latela taelo ena ho ka baka ho phatloha kapa ho chesa. - Kenya ho phanele ea sesebelisoa eo u ka e sebelisang.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase. - Se ke oa hokela, ho lokisa, kapa ho hlahloba yuniti ha o ntse o hoketsoe mohloling oa motlakase.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase. - Sheba 'Likhokahano' pele u kenya mohala.
Ho hloleha ho latela taelo ena ho ka baka mollo. - Se ke oa qhaqha kapa oa fetola yuniti.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase.
Tlhokomeliso Ho hloleha ho latela litaelo ho ka baka kotsi kapa tšenyo ea sehlahisoa
- Ha o hokela powerinput le tlhahiso ea relay, sebelisa thapo ea AWG 20 (0.50 mm2 ) kapa ka holimo 'me u tiise screw ea theminale ka torque e tiisang ea 0.74 ho isa ho 0.90 N m. Ha o hokela thapo ea sensor le thapo ea puisano ntle le thapo e inehetseng, sebelisa thapo ea AWG 28 ho isa ho 16 'me u tiise sekoti sa terminal ka torque e tiisang ea 0.74 ho isa ho 0.90 N m.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ho se sebetse hantle ka lebaka la ho hloleha ho kopana. - Sebelisa yuniti ka har'a lintlha tse reriloeng.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa - Sebelisa lesela le omeletseng ho hloekisa yuniti, 'me u se ke ua sebelisa metsi kapa motsoako oa tlhaho.
Ho hloleha ho latela taelo ena ho ka baka mollo kapa ts'okelo ea motlakase. - Beha sehlahiswa hole le chip, lerole, le masalla a terata a kenang yuniti.
Ho hloleha ho latela taelo ena ho ka baka tšenyo ea mollo kapa sehlahisoa.
Litemoso nakong ea Tšebeliso
- Latela litaelo ho 'Litemoso nakong ea Tšebeliso'. Ho seng joalo, e ka baka ntho e sa lebelloang
likotsi. - Sheba polarity ea li-terminals pele u kenya sensara mocheso. Bakeng sa RTD
Sensor ea mocheso, terata joalo ka mofuta oa terata tse 3, o sebelisa likhoele ka botenya le bolelele bo lekanang. Bakeng sa sensara ea mocheso oa thermocouple (TC) sebelisa terata e behiloeng ea matšeliso bakeng sa
terata e atolohang. - Boloka hole le molumo o phahamengtaglithapo tsa e kapa lithapo tsa motlakase ho thibela lerata le kenang. Haeba o kenya mohala oa motlakase le mohala oa lets'oao haufi-ufi, sebelisa sefe ea mohala kapa moeti mothapong oa motlakase le terata e sirelelitsoeng mothapong oa lets'oao la ho kenya. Se ke oa sebelisa haufi le sesebelisoa se hlahisang matla a matla a makenete kapa lerata le phahameng la maqhubu.
- Kenya sesebelisoa sa motlakase kapa sekhechana sa potoloho sebakeng se fumanehang habonolo bakeng sa ho fana kapa ho hakolla motlakase.
- Se ke oa sebelisa yuniti molemong o mong (mohlala, voltmeter, ammeter), empa taolo ea mocheso.
- Ha o fetola senotlolo sa ho kenya, tima motlakase pele o fetoha. Ka mor'a ho fetola senotlolo sa ho kenya, fetola boleng ba parameter e tsamaellanang.
- 24 VACᜠ, 24-48 VDCᜠ phepelo ea motlakase e lokela ho ba insulated le matla a fokolang.tage/hona joale kapa Sehlopha sa 2, SELV sesebelisoa sa phepelo ea motlakase.
- Etsa sebaka se hlokahalang ho potoloha unitforradiation ea mocheso. Bakeng sa tekanyo e nepahetseng ea mocheso, futhumatsa yuniti ho feta metsotso e 20 ka mor'a ho chesa motlakase.
- Etsa bonnete ba hore phepelo ea motlakase voltage fihla ho vol e lekantsoengtage kamora metsotsoana e 2 kamora ho fana ka matla.
- Se ke oa ts'oara terata ho li-terminals tse sa sebelisoang.
- Sehlopha sena se ka sebelisoa maemong a latelang.
- Ka tlung (boemong ba tikoloho e kentsoe 'Specifications')
- AltitudeMax. 2,000 m
- Tekanyo ea tšilafalo 2
- Sehlopha sa ho kenya II
Ho Odara Boitsebiso
Sena ke sa litšupiso feela, sehlahisoa sa 'nete ha se tšehetse metsoako eohle. Bakeng sa ho khetha mofuta o boletsoeng, latela Autonics websebaka.
- Boholo
S: DIN W 48× H 48 limilimithara
SP: DIN W 48× H 48 mm (mofuta wa polaka ya diphini tse 11)
Y: DIN W 72× H 36 limilimithara
M: DIN W 72× H 72 limilimithara
H: DIN W 48× H 96 limilimithara
W: DIN W 96× H 48 limilimithara
L: DIN W 96× H 96 limilimithara - Phallo ea alamo
N: Ha ho alamo- 1 alamo
- 2 alamo
- Phepelo ea motlakase
224VACᜠ 50/60Hz, 24-48 VDCᜠ
4: 100-240 VACᜠ50/60 Hz - Laola tlhahiso
N: Lesupa - ntle le tlhahiso ea taolo
R: Relay + SSR drive
Lisebelisoa tsa Sehlahisoa
- Sehlahisoa
- Brakete
- Buka ea litaelo
Rekiswa ka thoko
- 11 Pin sokete: PG-11, PS-11 (N)
- Sekoahelo sa tšireletso ea terminal: RSA / RMA / RHA / RLA Cover
Litlhaloso
| Letoto | TC4 □- □2 □ | TC4 □- □4 □ | |
| Matla phepelo | 24 VACᜠ 50/60 Hz ±10%24-48 VDCᜡ ±10% | 100 - 240 VACᜠ 50/60 Hz ±10% | |
| Matla tshebediso | AC: ≤ 5 VA, DC: ≤ 3 W | ≤ 5 VA | |
| Sampling nako | 100 ms | ||
| Kenyeletso tlhaloso | Sheba 'Mofuta oa Input le Using Range'. | ||
| Taolo tlhahiso | Relay | 250 VACᜠ 3 A, 30 VDCᜡ 3 A, 1a | |
| SSR | 12 VDCᜡ± 2 V, ≤ 20 mA | ||
| Phallo ea alamo | 250 VACᜠ 1 A 1a | ||
| Pontšo mofuta | 7 Karolo (e khubelu, e tala, e mosehla), mofuta oa LED | ||
| Taolo mofuta | Ho futhumatsa, ho Pholisa | ON/OFF, P, PI, PD, PID Control | |
| Hysteresis | 1 ho 100 (0.1 ho 50.0) ℃/℉ | ||
| Tekano sehlopha (P) | 0.1 ho isa ho 999.9 ℃/℉ | ||
| Kakaretso nako (I) | 0 ho isa ho 9,999 sec | ||
| E nkiloeng nako (D) | 0 ho isa ho 9,999 sec | ||
| Taolo potoloho (T) | 0.5 ho isa ho 120.0 sec | ||
| Bukana tsosolosa | 0.0 ho isa ho 100.0% | ||
| Relay bophelo potoloho | Mechini | OUT1/2, AL1/2: ≥ 5,000,000 ts'ebetso | |
| Motlakase | OUT1/2: ≥ 200,000 ts'ebetso (ho hanyetsa mojaro: 250 VACᜠ 3A) AL1/2: ≥ 300,000 ts'ebetso (ho hanyetsa moroalo: 250 VACᜠ 1 A) | ||
| Dielectric matla | Pakeng tsa terminal ea ho kenya le motlakase: 1,000 VACᜠ 50/60 Hz bakeng sa 1 min | Pakeng tsa terminal ea ho kenya le motlakase: 2,000 VACᜠ 50/60 Hz 1 min | |
| Ho thothomela | 0.75 limilimithara amplitude ka makhetlo a 5 ho isa ho 55Hz (bakeng sa 1 min) ho e 'ngoe le e' ngoe ea X, Y, Zdirection bakeng sa lihora tsa 2 | ||
| Insulation khanyetso | ≥ 100 MΩ (500 VDCᜡ megger) | ||
| Lerata ho itšireletsa mafung | Lerata la sebopeho sa sekwere (bophara ba pulse: 1 ㎲) ka simulator ea lerata ±2 kV R-mohato, S-phase | ||
| Mohopolo pokollo | ≈ lilemo tse 10 (mofuta oa mohopolo o sa fetoheng oa semiconductor) | ||
| Ambient mocheso | -10 ho 50 ℃, polokelo: -20 ho 60 ℃ (ha ho leqhoa kapa condensation) | ||
| Mongobo wa tikoloho | 35 ho 85% RH, polokelo: 35 ho 85% RH (ha ho leqhoa kapa condensation) | ||
| Insulation mofuta | Tšoaea: ▱, ho kenya letsoho habeli kapa ho matlafalitsoeng (matla a dielectric pakeng tsa karolo ea ho metha le karolo ea matla: 1 kV) | Tšoaea: ▱, ho kenya letsoho habeli kapa ho matlafalitsoeng (matla a dielectric pakeng tsa karolo ea ho metha le karolo ea matla: 2 kV) | |
| Kamohelo | ᜢ ᜧ ᜫ | ||
|
Yuniti boima (e phuthetsoe) |
|
|
|
|
|
||
|
|
||
|
|||
Mofuta oa ho Kena le Range ea ho Sebelisa
| Kenyeletso mofuta | Decimalntlha | Pontšo | Ho sebelisa mefuta-futa (℃) | Ho sebelisa mefuta-futa (℉) | |||||
| Thermo-couple | K (CA) | 1 | KC | -50 | ho | 1,200 | -58 | ho | 2,192 |
| J (IC) | 1 | JIC | -30 | ho | 500 | -22 | ho | 932 | |
| L (IC) | 1 | LIC | -40 | ho | 800 | -40 | ho | 1,472 | |
|
RTD |
Cu50 Ω | 1 | CU | -50 | ho | 200 | -58 | ho | 392 |
| 0.1 | CU L | -50.0 | ho | 200.0 | -58.0 | ho | 392.0 | ||
| Tlhaloso: DPT100 Ω | 1 | Dpt | -100 | ho | 400 | -148 | ho | 752 | |
| 0.1 | DptL | -100.0 | ho | 400.0 | -148.0 | ho | 752.0 | ||
Bontša ho nepahala
| Kenyeletso mofuta | Ho sebelisa mocheso | Pontšo nepahalo |
| Thermo-coupleRTD | Mocheso oa kamore(23℃ ±5 ℃) | (PV ±0.5% kapa ±1 ℃ e phahameng) ±-1-dijiti
|
| Ho tsoa mochesong oa kamore | (PV ±0.5% kapa ±2 ℃ e phahameng) ±-1-dijiti
|
- Tabeng ea TC4SP Series, ± 1 ℃ e tla eketsoa.
- Haeba tlhaloso ea ho kenya e behiloe ponts'ong ea 'decimal point 0.1', eketsa ±1℃ ka boemo bo nepahetseng.
Litlhaloso tsa Yuniti
- Karolo ea Pontšo ea Mocheso (Bofubelu)
- Mokhoa oa ho matha: E bonts'a PV (Boleng ba hona joale).
- Mokhoa oa ho beha: E bonts'a lebitso la parameter,
- sesupo
- Senotlolo sa ho kenya
| Pontšo | Lebitso |
| [MODE] | Senotlolo sa mode |
| [◀], [▼], [▲] | Ho beha senotlolo sa ho laola boleng |
| Pontšo | Lebitso | Tlhaloso |
| ▲■▼ | Ho kheloha | E bonts'a phapang ea PV e ipapisitseng le SV (Setting value) ka LED.▲: HO BUTSOA ha ho kheloha ho felile ＋2 ℃■: HO BUTSOA ha ho kheloha ho le ka har'a ±2 ℃▼: HO BUTSOA ha ho kheloha ho le ka tlase ho －2 ℃Mahlaseli nakong ea tokiso ea koloi motsotsoana o mong le o mong |
| SV | Ho beha boleng | E BUA ha SV e hlahiswa karolong e bontshang mocheso. |
| ℃, ℉ | Mocheso oa mocheso | E bonts'a yuniti e khethiloeng (parameter). |
| AL1/2 | Phallo ea alamo | E BUA ha alamo e nngwe le e nngwe e hlahiswa. |
| TSOA | Laola tlhahiso | E BUA ha control output ON.• CYCLE/PHASE control of SSR drive output: E Bulela ha MV e feta 3.0%. (feela molemong oa motlakase oa AC) |
Liphoso
| Pontšo | Tlhaloso | Ho batle phoso |
| BULETSE | Ho phatsima ha sensor ea ho kenya e khaotsoe kapa sensor e sa hokahana. | Hlahloba boemo ba kutlo ea kutlo. |
| E benya ha PV e phahame ho feta sebaka sa ho kenya. | Ha tlhahiso e le ka har'a lekhalo le reriloeng, ponts'o ena ea nyamela. | |
| TLHALA | E benya ha PV e le tlase ho feta sebaka se kenang. |
Litekanyo
- Yuniti: mm, Etsa litšoantšo tse qaqileng, latela Autonics websebaka.
- Ka tlase e thehiloe ho TC4S Series.
| Letoto | 'Mele | Phanele ho siea | |||||||
| A | B | C | D | E | F | G | H | I | |
| EA-KO4 | 48 | 48 | 6 | 64.5 | 45 | ≥65 | ≥65 | 45+0.60 | 45+0.60 |
| TC4SP | 48 | 48 | 6 | 72.2 | 45 | ≥65 | ≥65 | 45+0.60 | 45+0.60 |
| TC4Y | 72 | 36 | 7 | 77 | 30 | ≥91 | ≥40 | 68+0.70 | 31.5+0.50 |
| TC4W | 96 | 48 | 6 | 64.5 | 44.7 | ≥115 | ≥65 | 92+0.80 | 45+0.60 |
| TC4M | 72 | 72 | 6 | 64.5 | 67.5 | ≥90 | ≥90 | 68+0.70 | 68+0.70 |
| TC4H | 48 | 96 | 6 | 64.5 | 91.5 | ≥65 | ≥115 | 45+0.60 | 92+0.80 |
| TC4L | 96 | 96 | 6 | 64.5 | 91.5 | ≥115 | ≥115 | 92+0.80 | 92+0.80 |
Brakete 
Mokhoa oa ho kenya
EA-KO4
Flathead screwdriver
TC4Y
Crosshead screwdriver
Lihlooho tse ling
Flathead screwdriver
Beha sehlahisoa ho phanele ka bracket, sutumelletsa ditto arrow direction ka ho sebelisa screw driver.
Haeba ho na le TC4Y Series, tiisa liboutu.
Litlhaloso tsa Crimp Terminal
- Yuniti: mm, Sebelisa terminal ea crimp ea sebopeho sa ho latela
Mohala oa terata
Fork crimp terminal
Terminal ea crimp e chitja
Lihokelo
- EA-KO4
- TC4SP
- TC4Y
- TC4W
- TC4M
- TC4H/L
Mode Setting
Tlhophiso ea Parameter
- Li-parameter tse ling lia etsoa / ha li sebetse ho latela mohlala kapa litlhophiso tsa liparamente tse ling. Sheba tlhaloso ea ntho ka 'ngoe.
- Lethathamo la litlhophiso ka masakaneng ke la ho sebelisa ponts'o ea lintlha tsa decimal ho litlhaloso tsa ho kenya.
- Haeba ho se na senotlolo bakeng sa metsotsoana e fetang 30 paramethareng ka 'ngoe, e khutlela ho RUN mode.
- Ha o tobetsa konopo ea [MODE] nakong ea motsotsoana oa 1 ka mor'a ho khutlela mokhoeng oa ts'ebetso ho tloha sehlopheng sa parameter, e tla kenya sehlopha sa parameter pele e khutla.
- Senotlolo sa [MODE]: E boloka boleng ba boemo ba hona joale ba parametha mme e fetela ho paramethara e latelang. [◀] senotlolo: E tsamaisa kholomo ha u fetola boleng bo behiloeng [▲], [▼] linotlolo: E khetha paramente / E fetola boleng bo behiloeng
- Tatelano ea litlhophiso tse khothalelitsoeng: Sehlopha sa 2 sa Paramethara → Sehlopha sa 1 → Mokhoa oa ho beha SV ■ Sehlopha sa 1
- E hlaha feela ho "control output model".
| Paramethara | Pontšo | Ea kamehla | Tlhophiso mefuta-futa | Boemo | |
| 1-1 | Mocheso oa alamo oa AL1 | L | 250 | Alamo ea ho kheloha: -FS ho FS ℃/℉ Alamo ea boleng bo felletseng: Ka har'a mefuta e kenang | 2-12/14AL1/2 ts'ebetso ea alamo: AM1 ho AM6 |
| 1-2 | Mocheso oa alamo oa AL2 | L2 | 250 | [2 alamo ea mohlala]E tšoana le mocheso oa alamo oa 1-1 AL1 | |
| 1-3 | Tokiso ea boiketsetso | T | TLOA | TIMA: Emisa, BUTSE: Phethahatso | 2-8 Mofuta oa taolo: PID |
| 1-4 | Proportionalband | P | 0) 0 | 0.1 ho isa ho 999.9 ℃/℉ | |
| 1-5 | Nako e kopaneng | I | 0000 | 0 (OFF) ho isa ho 9999 sec | |
| 1-6 | Nako ea ho tsoa | D | 0000 | 0 (OFF) ho isa ho 9999 sec | |
| 1-7 | Seta bocha ka letsoho | PHOMOLO | 05)0 | 0.0 ho isa ho 100.0% | 2-8 Mofuta oa taolo: PID & 1-5 Integraltime: 0 |
| 1-8 | Hysteresis | YS | 002 | 1 ho 100 (0.1 ho 50.0) ℃/℉ | Mofuta oa 2-8 oa taolo: ONOF |
Sehlopha sa 2 sehlopha
Tabeng ea mohlala oa letšoao, ho hlaha feela 2-1 ho 4 / 2-19 parameters
| Paramethara | Pontšo | Ea kamehla | Tlhophiso mefuta-futa | Boemo | ||
| 2-1 | Tlhaloso 01) | IN-T | KC | Sheba 'Mofuta oa Input le Using Range'. | - | |
| 2-2 | Mocheso oa mocheso 01) | THUTO | ?C | ℃, ℉ | - | |
| 2-3 | Khalemelo ea ho kenya | KA-B | 0000 | -999 ho isa ho 999 (-199.9 ho isa ho 999.9) ℃/℉ | - | |
| 2-4 | Kenya filter ea digital | M F | 00) | 0.1 ho isa ho 120.0 sec | - | |
| 2-5 | SV moeli o tlase 02) | L-SV | -050 | Ka har'a lintlha tse 2-1 tse kentsoeng: Ho sebelisoa mofuta,L-SV ≤ H-SV - 1-digit ℃/℉ H-SV ≥ L-SV + 1-digit ℃/℉ | - | |
| 2-6 | SV tekanyo e phahameng 02) | -SV | 200 | - | ||
| 2-7 | Laola mofuta oa tlhahiso | O-FT | ET | MOCHESO: Ho futhumala, pholile: Ho pholile | - | |
| 2-8 | Mofuta oa taolo 03) | C-MD | PID | PID, ONOF: ON/OFF | - | |
| 2-9 | Laola tlhahiso | TSOA | RLY | RLY: relay, SSR | - | |
| 2-10 | Mofuta oa tlhahiso ea koloi ea SSR | SSRM | STND | [AC voltage model]STND: e tloaelehileng, CYCL: cycle, PHAS:phase | 2-9 Controloutput: SSR | |
| 2-11 | Potoloho ea taolo | T | 02)0 | 0.5 ho isa ho 120.0 sec | 2-9 Controloutput: RLY2-10 SSR mofuta oa tlhahiso ea koloi: STND | |
| 00 0 | 2-9 Controloutput: SSR2-10 SSR mofuta oa tlhahiso ea koloi: STND | |||||
| 2-12 | Ts'ebetso ea alamo ea AL1 04) | L- | M! □ □●.■ | □ □ □ AM0: OffAM1: Phaello alamo ea moeli o phahameng AM2: Ho kheloha moeli o fokolang alamoAM3: Ho kheloha holimo, alamo ea moeli o tlaase AM4: Ho kheloha holimo, alamo e ka morao e tlaase AM5: Boleng bo felletseng bo phahameng moeli oa molumo AM6: Boleng bo felletseng ba moeli o tlase SBA: Sensor break alamoLBA: Alamo ea Loop break (LBA) | - | |
| 2-13 | Khetho ea alamo ea AL1 | ■A: Alamo e tloaelehilengC: Tatelano ea standby 1E: Standbysequence 2 | B: Letlapa la alamoD: Latch ea alamo le tatelano ea standby 1F: Letlapa la alamo le tatelano ea standby 2 | - | ||
| • Kena ho setting ya kgetho: Tobetsa [◀] keyin 2-12 AL-1 tshebetso ya alamo. | ||||||
| 2-14 | Ts'ebetso ea alamo ea AL2 04) | L-2 | M | [Mohlala oa alamo ea 2]E tšoana le ts'ebetso ea alamo ea 2-12/13 AL1/khetho | - | |
| 2-15 | Khetho ea alamo ea AL2 | |||||
| 2-16 | Alarm tlhahiso ea hysteresis | YS | 000 | 1 ho 100 (0.1 ho 50.0) ℃/℉ | 2-12/14AL1/2 ts'ebetso ea alamo: AM1 ho isa ho 6 | |
| 2-17 | Nako ea LBA | LBaT | 0000 | 0 (OFF) ho isa ho metsotsoana e 9,999 kapa koloi (ho lokisa likoloi) | 2-12 / 14AL1 / 2 ts'ebetso ea alamo: LBA | |
| 2-18 | Sehlopha sa LBA | LBaB | 002 | 0 (OFF) ho isa ho 999 (0.0 to 999.9) ℃/℉ orauto (auto tunning) | 2-12/14AL1/2 ts'ebetso ea alamo: LBA & 2-17 LBA nako: ~ 0 | |
| 2-19 | Digital inputkey | EA-K | EMA | Emisa: Emisa tlhahiso ea taolo, AL.RE: Alarm reset, AT*: Ts'ebetso ea tokiso ea boiketsetso, E TLITSOE | *2-8 Mofuta oa taolo: PID | |
| 2-20 | Phoso ea kutlo MV | ErMV | 00)0 | 0.0: TLOA, 100.0: ON | Mofuta oa 2-8 oa taolo: ONOF | |
| 0.0 ho isa ho 100.0% | 2-8 Mofuta oa taolo: PID | |||||
| 2-21 | Notlela | LOC | TLOA | OFFLOC1: Senotlolo sa sehlopha sa Parameter 2 LOC2: Paramethara 1/2 Senotlolo sa sehlophaLOC3: Paramethara 1/2 Sehlopha, senotlolo sa SV | - | |
| [Mohlala oa sesupo]OFFLOC1: Senotlolo sa sehlopha sa Paramethara 2 | ||||||
| Paramethara | Pontšo | Ea kamehla | Tlhophiso mefuta-futa | Boemo | ||
| 2-1 | Tlhaloso 01) | IN-T | KC | Sheba 'Mofuta oa Input le Using Range'. | - | |
| 2-2 | Mocheso oa mocheso 01) | THUTO | ?C | ℃, ℉ | - | |
| 2-3 | Khalemelo ea ho kenya | KA-B | 0000 | -999 ho isa ho 999 (-199.9 ho isa ho 999.9) ℃/℉ | - | |
| 2-4 | Kenya filter ea digital | M F | 00) | 0.1 ho isa ho 120.0 sec | - | |
| 2-5 | SV moeli o tlase 02) | L-SV | -050 | Ka har'a lintlha tse 2-1 tse kentsoeng: Ho sebelisoa mofuta,L-SV ≤ H-SV - 1-digit ℃/℉ H-SV ≥ L-SV + 1-digit ℃/℉ | - | |
| 2-6 | SV tekanyo e phahameng 02) | -SV | 200 | - | ||
| 2-7 | Laola mofuta oa tlhahiso | O-FT | ET | MOCHESO: Ho futhumala, pholile: Ho pholile | - | |
| 2-8 | Mofuta oa taolo 03) | C-MD | PID | PID, ONOF: ON/OFF | - | |
| 2-9 | Laola tlhahiso | TSOA | RLY | RLY: relay, SSR | - | |
| 2-10 | Mofuta oa tlhahiso ea koloi ea SSR | SSRM | STND | [AC voltage model]STND: e tloaelehileng, CYCL: cycle, PHAS:phase | 2-9 Controloutput: SSR | |
| 2-11 | Potoloho ea taolo | T | 02)0 | 0.5 ho isa ho 120.0 sec | 2-11Sephetho sa taolo: RLY2-12 SSR mofuta oa tlhahiso ea koloi: STND | |
| 00 0 | 2-11Sephetho sa taolo: SSR2-12 SSR mofuta oa tlhahiso ea koloi: STND | |||||
| 2-12 | Ts'ebetso ea alamo ea AL1 04) | L- | M! □ □●.■ | □ □ □ AM0: OffAM1: Phaello alamo ea moeli o phahameng AM2: Ho kheloha moeli o fokolang alamoAM3: Ho kheloha holimo, alamo ea moeli o tlaase AM4: Ho kheloha holimo, alamo e ka morao e tlaase AM5: Boleng bo felletseng bo phahameng moeli oa molumo AM6: Boleng bo felletseng ba moeli o tlase SBA: Sensor break alamoLBA: Alamo ea Loop break (LBA) | - | |
| 2-13 | Khetho ea alamo ea AL1 | ■A: Alamo e tloaelehilengC: Tatelano ea standby 1E: Standbysequence 2 | B: Letlapa la alamoD: Latch ea alamo le tatelano ea standby 1F: Letlapa la alamo le tatelano ea standby 2 | - | ||
| • Kena ho setting ya kgetho: Tobetsa [◀] keyin 2-12 AL-1 tshebetso ya alamo. | ||||||
| 2-14 | Ts'ebetso ea alamo ea AL2 04) | L-2 | M | [Mohlala oa alamo ea 2]E tšoana le ts'ebetso ea alamo ea 2-12/13 AL1/khetho | - | |
| 2-15 | Khetho ea alamo ea AL2 | |||||
| 2-16 | Alarm tlhahiso ea hysteresis | YS | 000 | 1 ho 100 (0.1 ho 50.0) ℃/℉ | 2-12/14AL1/2 ts'ebetso ea alamo: AM1 ho isa ho 6 | |
| 2-17 | Nako ea LBA | LBaT | 0000 | 0 (OFF) ho isa ho metsotsoana e 9,999 kapa koloi (ho lokisa likoloi) | 2-12 / 14AL1 / 2 ts'ebetso ea alamo: LBA | |
| 2-18 | Sehlopha sa LBA | LBaB | 002 | 0 (OFF) ho isa ho 999 (0.0 to 999.9) ℃/℉ orauto (auto tunning) | 2-12/14AL1/2 ts'ebetso ea alamo: LBA & 2-17 LBA nako: ~ 0 | |
| 2-19 | Digital inputkey | EA-K | EMA | Emisa: Emisa tlhahiso ea taolo, AL.RE: Alarm reset, AT*: Ts'ebetso ea tokiso ea boiketsetso, E TLITSOE | *2-8 Mofuta oa taolo: PID | |
| 2-20 | Phoso ea kutlo MV | ErMV | 00)0 | 0.0: TLOA, 100.0: ON | Mofuta oa 2-8 oa taolo: ONOF | |
| 0.0 ho isa ho 100.0% | 2-8 Mofuta oa taolo: PID | |||||
| 2-21 | Notlela | LOC | TLOA | OFFLOC1: Senotlolo sa sehlopha sa Parameter 2 LOC2: Paramethara 1/2 Senotlolo sa sehlophaLOC3: Paramethara 1/2 Sehlopha, senotlolo sa SV | ||
| [Mohlala oa matšoao] TLOA LOC1: Senotlolo sa sehlopha sa Paramethara 2 | ||||||
- Ka tlase li-parameter li qalisoa ha boleng ba boemo bo fetoloa
- Sehlopha sa 1 parameter: AL1/2 mocheso oa alamo
- Sehlopha sa 2 sa Paramethara: Tokiso ea lintho tse kentsoeng, moeli oa SV o phahameng / o tlase, Alarm output hysteresis, Blaine, Labane
- Mokhoa oa ho beha SV: SV
- IASIS e tlase / e phahameng ho feta moeli o tlase / o phahameng ha boleng bo fetoloa, li-SVS li fetotsoe ho boleng bo tlaase / bo phahameng. Haeba 2-1 Litlhaloso tsa Input li fetotsoe, boleng bo fetoloa ho Min./Max. boleng ba tlhahiso ea Input.
- Ha u fetola boleng ho tloha ho PID ho ea ho ONOF, boleng bo bong le bo bong ba parameter e latelang boa fetoloa. 2-19 Digital input key: OFF, 2-20 Sensor error MV: 0.0 (Ha ho seta boleng bo ka tlase ho 100.0)
- 1-1 / 2 AL1, AL2 litekanyetso tsa mocheso oa mocheso oa alamo li qalisoa ha boleng ba boemo bo fetoloa.
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Rephabliki ea Korea, 48002
www.autonics.com | +82-2-2048-1577 | thekiso@autonics.com
Litokomane / Lisebelisoa
 |
Autonics TC Series TC4Y-N4R Single Display PID Temperature Controllers [pdf] Buka ea Taelo TC Series TC4Y-N4R Single Display PID Temperature Controllers, TC Series, TC4Y-N4R Single Display PID Temperature Controllers, PID Temperature Controllers, Temperature Controllers |
