ZZ2 IT3-LEX1 Series Advanced CarPlay/Android Auto Integration

Litlhaloso:

• Likaroloana:
  • ZZPZZPLAY Interface3
  • OLD GVIF TYPE
  • NEW GVIF TYPE
  • Screen Cable
  • AV, USB Cable
  • ANTENA
  • OLD Type GVIF (LEX15, LEX17 only)
  • NEW Type GVIF (LEX19 only)
  • High Type Harness LEX15 (only)
  • OLD Type Harness LEX17 (only)
  • New Type Harness LEX19 (only)

Litaelo tsa Tšebeliso ea Sehlahisoa

Connection for Joystick vs Touchpad:

If the vehicle is equipped with the Joystick, ensure that the 15H-KT is connected to the joystick. Refer to page 7 for the diagram.

If the vehicle has a Small Touch Pad, make sure that A# is plugged into C# connector as shown in the picture reference.

Litšoantšo tsa ho Kena:

For IT3-LEX15:

• You must be in BT Audio or AUX mode for audio playback from CarPlay system.
• Ground the Audio Ground Wire if using AUX for sound in Lexus systems.
• The Screen Correction T-Harness MUST be connected to prevent flickering.
• If the vehicle has a Joystick, install the KT harness and set the option to ‘Remote Lever’ in Setup.

Likhetho tsa ho Bapala Molaetsa:
To change settings, access the interface main menu ZZPLAY > SETUP. Scroll to the bottom of the list. If ‘BT Channel’ is missing, update the system by contacting ZZ2.

OPTION 1 (recommended):

• Use Car’s BT Channel (ON) to send CarPlay/AA audio directly to factory radio’s Bluetooth stream source.
• Adjusting this feature will reboot the unit once.

KHETHO EA 2:

• Use Car’s BT Phone (ON) to send CarPlay/AA music to AUX and telephony to factory radio’s Bluetooth system for phone calls only.

Likaroloana

IT3-LEX15 Joystick vs Touchpad

Sets'oants'o se Felletseng sa Kemiso

IT3-LEX15

LIHLOOHO:

• You must be in BT Audio or AUX mode for audio playback from CarPlay system.
• *For Lexus systems, typically MUST ground the Audio Ground Wire if using AUX for sound.
• The Screen Correction T-Harness MUST be connected to the screen or flickering will occur!
• If vehicle has a Joystick, the KT harness must be installed AND the option must be set to ‘Remote Lever’ inside Setup.

HLOKOMELA: With the latest system software (3.6.13+), use OEM Bluetooth streaming (source) for all audio playback from CarPlay/Android Auto.

IT3-LEX17

HLOKOMELA

• You must be in AUX Audio mode for audio playback from CarPlay system.
• *For Lexus systems, typically MUST ground the Audio Ground Wire if using AUX for audio.
• The Screen Correction T-Harness MUST be connected to the screen or flickering will occur!

HLOKOMELA: Ka software ea morao-rao ea sistimi (3.6.13+), sebelisa OEM Bluetooth ho phallela (mohloli) bakeng sa ho bapala molumo kaofela ho tsoa ho CarPlay/Android Auto.

*For some IS models, the key-ways may need to be shaved off (BLUE T-Harness)

IT3-LEX19

HLOKOMELA

• You must be in AUX Audio mode for audio playback from CarPlay system.
• *For Lexus systems, typically MUST ground the Audio Ground Wire if using AUX for audio.
• The Screen Correction T-Harness MUST be connected to the screen or flickering will occur!

HLOKOMELA: Ka software ea morao-rao ea sistimi (3.6.13+), sebelisa OEM Bluetooth ho phallela (mohloli) bakeng sa ho bapala molumo kaofela ho tsoa ho CarPlay/Android Auto.

Likhetho tsa ho Bapala Moelelo

Ho fetola litlhophiso tsena, o tlameha ho kena ho menu e kholo ea interface. Eya ho ZZPLAY>SETUP 'me u tsamaise ho ea tlase lethathamong. Haeba 'BT Channel' e le sieo, sistimi ea hau e siiloe ke nako 'me e hloka ho ntlafatsoa. Ikopanye le ZZ2 bakeng sa lintlha tse ling.

Sebelisa BT Channel ea Koloi (ON):
E romella li-audio tsohle tsa CarPlay/AA ('mino le mohala) ka kotloloho mohloling oa radio oa feme ea Bluetooth.

LINTLHA TSEO:

• Ha se likoloi tsohle tse tla ba le lisebelisoa tsa Bluetooth - netefatsa pele u li sebelisa
• Fono e tlameha ho sala (Bluetooth) e hoketswe radiong ya feme bakeng sa mehala le mmino
• Sebelisa mohloli oa BT Audio (eseng AUX!) ho utloa 'mino ho tsoa ho CarPlay/AA
• Ho fetola sebopeho sena (ON kapa OFF) ho tla qala yuniti hape hang

Sebelisa BT Phone (ON) ea Koloi: E romela 'mino oa CarPlay/AA ho AUX, empa mohala ho sistimi ea radio ea feme ea Bluetooth bakeng sa mehala feela.

LINTLHA TSEO:

• Fono e tlameha ho sala (Bluetooth) e hoketswe radiong ya feme bakeng sa mehala feela
• Sebelisa mohloli oa Input oa AUX (eseng Bluetooth Audio!) ho utloa 'mino ho tsoa ho CarPlay/AA
• Araba mehala e kenang ho tsoa konopo ea ho lata lebili la setere bakeng sa liphetho tse ntle
• Etsa mehala e tsoang u sebelisa SIRI/Taelo ea Lentsoe ho fumana liphetho tse ntle

Sebelisa BT Channel & Phone (OFF) ea Koloi: E romela 100% ea molumo ho tloha CarPlay/AA ho ea ho AUX - ho kenyeletsa le mehala.

LINTLHA TSEO:

• Ho hokela Bluetooth ha fektheri ha ho hlokahale
• E ka baka molumo nakong ea mehala - litlhophiso tsa MIC kahare ho karolo ea 'AUDIO' e teng bakeng sa ho lokisoa
• E tlameha ho sebelisa setup sena bakeng sa tšobotsi ea Mirroring ea Fono bakeng sa molumo o tsoang fonong ha o etsa seipone

Mokhoa oa ho hokela ho Apple CarPlay / Mokhoa oa ho seta mehala ea Bluetooth

1. Haeba u batla ho sebelisa thapo ho hokahanya iPhone ea hau, ka kopo sebelisa thapo e netefalitsoeng ea Apple.
2. Haeba o batla ho sebelisa khokahano ea mohala, ka kopo latela mehato e latelang.
3. Pele o kopanya iPhone le sistimi, ka kopo etsa bonnete ba hore o etsa "reset ka thata" fonong e le ho thibela ho se sebetse hantle. (Sheba bukana ea mohala / inthaneteng)
4. Hang ha u qetile ka mohato o fetileng, e ea ho Litlhophiso> Bluetooth 'me fono e lokela ho fumana sesebelisoa sa Bluetooth se bitsoang CarPlay8***** tlas'a lisebelisoa tse ling.
5. Khetha CarPlay8***** 'me Kopo ea Bluetooth Pairing e tla hlahisoa skrineng ka khoutu. Khetha "PAIR".
6. Hang ka mor'a tsebiso ea Paring ho tla hlaha kopo e ncha ea ho Sync lebitso la hau le koloi. Khetha "LUMELLA" hore u be le ID ea motho ea letsetsang le ho fihlella mabitso a hau ka CarPlay.
7. Tsebiso e kopang tumello ea ho hokela iPhone ea hau koloing leha fono e notletsoe e tla hlaha. Khetha "Sebelisa CarPlay" 'me skrine e kholo ea CarPlay e lokela ho hlaha skrineng sa seea-le-moea sa fektheri.
8. When the phone is connected push and hold the MENU button for 2 seconds to switch to CarPlay. Once you are in CarPlay mode select the ZZPLAY tile to go to the interface’s main menu.

Mehala ea mohala oa Bluetooth
Please access the Main Menu of the Interface, by selecting the yellow ZZPLAY tile, and then go to SETUP > USING CAR’S BT CHANNEL and make sure that option is ON. After that go back to the main screen and RETURN to CarPlay/Android Auto. On the phone, please make sure the device is paired with the factory LEXUS Bluetooth as well as the ZZPLAY unit.

Ha o sebelisa sistimi ea ZZPLAY, o tlameha ho ba mohloling oa Bluetooth Audio (eseng AM, FM, AUX kapa mohloli ofe kapa ofe) hore o utloe molumo ho tsoa ho CarPlay/AA. Haeba koloi e se na Bluetooth ka feme, u tlameha ho sebelisa AUX bakeng sa mohloli oa molumo ('me BT Channel e tlameha ho tima).

DIP Switch Settings

Ketso ka likonopo tsa mantlha

HLOKOMELA: Ka software ea morao-rao ea sistimi (3.6.13+), sebelisa OEM Bluetooth ho phallela (mohloli) bakeng sa ho bapala molumo kaofela ho tsoa ho CarPlay/Android Auto.

*HLOKOMELA: Older model Lexus vehicles may use MAP instead of MENU to change modes.

Litlhophiso

Maqephe a 'maloa a latelangview segokanyimmediamentsi sa sebolokigolo sa IT3, di-setting tsa ho tsamaya le ho hlalosa ho kena/ho tswa dimenung tsohle. Ho na le (2) litsamaiso tsa menyetla tse teng kantle ho sistimi ea seea-le-moea sa OE: menu ea CARPLAY (kapa Android Auto) le ZZPLAY Interface Menu. Li sebetsa li sa ikemela ho tse ling (menu ea ZZPLAY Interface e tla sebetsa ho sa tsotelehe hore na mohala o hokahane le module kapa che). Litlhophiso tsa CARPLAY li tla laola feela litlhophiso tsa CarPlay. Litlhophiso tsa Sebopeho sa ZZPLAY se laola lintho tse kang litlhophiso tsa kh'amera e ka morao, litlhophiso tsa taolo ea tlhahiso ea molumo le liparamente tse ling tse ikhethileng tsa koloi / sefahleho.

Ho kenya Menu ea Sehokelo sa ZZPLAY ho tsoa ho sistimi ea CARPLAY, fumana thaele ea 'Tsoa' ebe u e khetha. Haeba ho se na mohala o hokahaneng, feela ho sebelisa konopo ea ts'ebetso (eo hangata e u tlisang mokhoeng oa CARPLAY) e tla u kenya ho Menu ea Sebopeho sa ZZPLAY.

Haeba fono e parakane 'me u kene ho ZZPLAY Interface Menu, khetha 'Khutlela ho [icon]' ho khutlela ho CarPlay mode.

Ho khetha 'Setup' ho tla u tlisa ho ZZPLAY Interface Setup Menu ka likhetho tsohle tse amanang le koloi e itseng le ho e kenya.

Ka Hare Sistimi e kenyelletsa Puo, likhetho tsa Pontšo, mokhoa oa prep oa Software Update (Lintlafatso tsa USB - CONTACT US) le tlhahisoleseling ea Version Version bakeng sa mojule ona. ELA HLOKO: Sekerine sa tlhaiso-leseling sa System Version se boloka tlhaiso-leseling e hlokahalang ha u nchafatsa mojule - nka setšoantšo sa sena haeba u rera ho nchafatsa yuniti.

Audio e fana ka taolo ea boemo ba molumo bakeng sa sebopeho:
(Bophahamo ba Molumo oa Lefatše, 'Mino, Puo le Tlhokomeliso kaofela li arotsoe ka ho khetheha bakeng sa ho lokisa sebopeho bakeng sa boiphihlelo bo botle ba mosebelisi).

Letoto la li-setting tsa Microphone li sebelisoa ka ho khetheha ha ho sebelisoa maekrofono a fanoeng. ZZ2 e khothaletsa ho sebelisa sistimi ea OEM Bluetooth neng kapa neng ha ho khonahala bakeng sa lisebelisoa tsa IT3 ('me maemong a joalo, litlhophiso tsena ha li sebetse). Maemong a mang moo microphone e fanoeng e hlokahalang, latela mehato ena ho fokotsa tieho ea echo (OR tsamaisa 'AEC Auto Setup ka tlase):
Pele o qala, e-ba ka mokhoa oa AUX, motho e mong o tlameha ho ba le uena fonong (ka ntle ho koloi) ho etsa liteko, ho qala koloi le ho theola lifensetere tsohle:

1. Theola Microphone OP (phaello) tlase haholo kamoo ho ka khonehang, ho fihlela o ntse o ka e utloa hantle (hangata 1-3)
2. Start Microphone Delay at 0, bring up 1 detent at a time, testing audibly while you increase this setting (say: ‘testing 1, 1, 1, 1’, then ‘testing 2, 2, 2, 2’ as you go, etc). Stop when echo goes away.
3. Lekola mohala hape ha o qetile ka maemo a fapaneng a molumo (OE).

AEC Auto Setup e tla leka ho etsa tlhahlobo ea ho lieha ha echo ka bo eona. Bakeng sa teko ena u ke ke ua ba fonong ho qala, e sebelisa letoto la lithane ho fumana mokhoa oa ho fetola litlhophiso ho latela bokahare ba koloi.

Reverse e hlophisa likhetho tsohle tsa khamera, ekaba aftermarket kapa OEM.
Reverse Camera e lokela ho ba ea kamehla e behiloeng ho 'Original' bakeng sa kh'amera ea OE, kapa khetha 'Aftermarket' haeba u eketsa kh'amera e ka morao.

Reverse Line Detect e kenya mochini o kenyang mohala (violet) bakeng sa kh'amera e ka morao (e sebelisetsoang phetiso ea matsoho hangata), e fumanehang ho USB Media Harness. Ha karolo ena e BUTSE, e kanna ea tima taelo e ka morao (ho feta data ea CAN).
Reverse Display Track e hlalosa hore na e tla hlahisa litataiso tse matla setšoantšong se ka morao kapa che (aftermarket cam feela).
Reverse Display Radar e sebelisoa feela ha koloi e e-na le li-sensor tsa OE reverse (hangata e tla bonts'a skrini sa radar se bonoang haufi le skrini sa khamera e ka morao).
Pele View Nako e beha bolelele ba nako eo kh'amera e ka pele e ekelitsoeng (ho ea ho Front RCA) e tla bonts'a ka mor'a ho siea lisebelisoa tse ka morao.
Reverse Match Original e lokisa boemo ba skrine e ka morao hore e bapale sebaka sa kh'amera ea mantlha.

Match 360 Display, kapa Ignore 360 ​​State (e itšetlehileng ka koloi) e amana le koloi efe kapa efe e nang le lik'hamera tse ngata. Fetola sena ho bonts'a lik'hamera tse roketsoeng kapa tse mahlakoreng ha u le CarPlay/AA mode ha ho joalo. Karolo ena hangata e TIMA.

• Carplay/Android Auto e na le liphetoho bakeng sa boemo ba skrineng ba CarPlay (ka kakaretso) le likarolo tse ling tse sa sebelisoeng hangata tsa skrineng sa CarPlay/AA.
• Left Scrap e suthisetsa skrini sa CarPlay/AA ka ho le letšehali ka li-increments tse nyane.
• Right Scrap e suthisa skrini sa CarPlay/AA ho ea ho le letona ka li-increments tse nyane.
• Top Scrap e suthisetsa skrine ea CarPlay/AA holimo ka li-increments tse nyane.
• Scrap e ka tlase e suthisetsa skrini sa CarPlay/AA ho ea tlase ka li-increments tse nyane.
• Auto Dark Mode e fifatsa skrini sa CarPlay/AA ho ipapisitse le maemo a hajoale a Fono (kapa ea hlokomolohuoa).
• Numella Carplay U/D Key ho fetola litaelo tse itseng tsa CAN, U SE KE UA SEBELISA SEHLOOHO ENA.

Ha u khutlela ho Setupo, Wifi Channel (ho hlokahala hore e qale hape) e seta mocha oa WIFI o sebelisoang ho hokela mohala. Haeba lintlha tse ling kaofela li hlahlobiloe (ho beoa ha antenna, Mode ea data e tlase, joalo-joalo) 'me u ntse u na le mathata a khokahanyo ea waelese:

1. Mohaleng, seta bocha li-setting tsa marang-rang a fono: SETTINGS>KAKARETSO>SETA BOSHA>SETA SETSING TSA NETWORK
2. Sehokelong: Seta mocha oa Wifi (ho hlokahala hore o qale hape) ho '6', ebe o qala hape le ho etsa liteko.

Phapanyetsano ea Senotlolo sa Wheel e tla fetola litaolo tsa ho sesa tsa CarPlay/AA ho tloha UP=HO HOLIMO ho ea UP=TLASE le ho tloha HO LETELE=LE LETSATSI ho leba HO LEFT=RIGHT. ELA HLOKO: sena ha se tšehetsoe koloing e 'ngoe le e 'ngoe.

Touch Pad/Remote Lever (Lexus feela):

• Mini Touch Pad > Bakeng sa likoloi tse nang le TOUCH PAD
• Remote Lever > Bakeng sa likoloi tse nang le Joystick
• Ho Sebelisa Mohala oa BT oa Koloi: Ho tloha ka SW verison 3.6.13, boemo bona ha boa lokela ho sebelisoa.
• Using Car’s BT Channel: As of SW version 3.6.13, this setting should be turned ON for every installation (unless the vehicle does not come equipped with OEM Bluetooth). Once turned ON, use OEM
• Bluetooth Audio source for all sound from the ZZPLAY unit. This is how ZZ2 always suggests to use these systems (for IT3 hardware).
• HiCar map confirmation: This setting is never used in N.A. – leave OFF and ignore.

support@zz-2.com

929-220-1212
Nomoro ea mahala: 877-241-2526 Katoloso ea 2: Tšehetso ea Theknoloji

Tumellano: Mosebelisi oa ho qetela o lumela ho sebelisa sehlahisoa sena ho latela melao eohle ea Naha le 'Muso. ZZDOIS LLC dba ZZ-2 ha ea lokela ho nkoa e le molato bakeng sa tšebeliso e mpe ea sehlahisoa sa eona. Haeba u sa lumellane, ka kopo khaotsa ho sebelisa hang-hang 'me u khutlisetse sehlahisoa ho morekisi. Sehlahisoa sena se etselitsoe tšebeliso ea kantle ho tsela le boithabiso ba bapalami feela.

Pele o kenya lihlahisoa tsa ZZ-2 LLC, basebelisi ba tlameha ho bala le ho utloisisa bukana ka botlalo. Ka ho kenya le/kapa ho sebelisa sehlahisoa seo u lumelang ho tlamahana le lipehelo le lipehelo tse latelang: Ho hang ZZ-2 LLC e tla ikarabella bakeng sa litšenyehelo leha e le life, ho kenyeletsoa, ​​​​empa e lekanyelitsoe ho, ka ho toba, ka tsela e sa tobang, e khethehileng, kapa ea litlamorao tse bakoang ke, kapa tsela leha e le efe e amanang le tšebeliso ea lihlahisoa tsa ZZ-2 LLC ho sa tsotellehe hore na ho itšetlehile ka tiisetso, konteraka, kapa ho seng joalo; hore na kotsi e ile ea etsoa ke batho kapa thepa kapa che; le hore na tahlehelo e ile ea tšehetsoa kapa che, kapa e hlahile ka lebaka la liphetho tsa ntho eo, kapa litšebeletso life kapa life tse ka fanoang ke ZZ-2 LLC.

LBH

How do I update the system if 'BT Channel' is missing?

Contact ZZ2 for more information on updating the system.

Ha ke utloe molumo ofe kapa ofe ho tsoa ho sistimi ea CarPlay/Android Auto.

Your OE system must be resting on BT Audio (if on latest module sw) or AUX mode in order to hear any sound from the kit. This includes during phone calls. NOTE Some systems AUX input are not labeled 'AUX', it may be labeled 'Media Interface' or there may be an audio conversion to the vehicle's USB input. Check with your installer for more information.

Ke utloa litlaleho tsa echo e ngata kapa molumo o liehang oa molumo nakong ea mohala. Ke hobane'ng ha see se etsahala 'me nka felisa see joang?

Sena se etsahala ha o sebelisa tlhahiso ea OEM AUX bakeng sa molumo sebakeng sa OEM Bluetooth. Ha u sebelisa AUX, tsela ea matšoao e tsamaea ka OEM amplifier, 'me ho na le tlhophiso ea nako e sebetsang le ts'ebetso ho kanaleng ena ea molumo e leng sesosa sa mantlha. E le ho qoba bothata bona, mochine o tlameha ho ba le ntlafatso ea morao-rao ea firmware (bonyane 3.6.13), ebe ka hare ho setupong sa ZZPLAY, bula 'Ho Sebelisa BT Channel ea Koloi'. Ha litlhophiso tsena li sebetsa, sebelisa Bluetooth Audio ea feme sebakeng sa AUX bakeng sa melumo eohle e tsoang ho CarPlay/AA.

Ka nako e 'ngoe fono ea ka e ke ke ea hokela morao tjena / Ka linako tse ling ha e hokela skrineng e ba ntšo / Ka linako tse ling CarPlay e nteleka hore ke khutlele ho menu ea sebopeho.

Bakeng sa basebelisi ba iPhone, o tlameha ho etsa 'Hard Reset' fonong e sebelisoang ka karolelano habeli ka khoeli ho hlakola cache e itseng le ho seta li-processor (sena se ke ke sa hlakola data efe kapa efe). Patlo ea Google 'Hard Reset iPhone 13' (kapa mofuta ofe kapa ofe oa mofuta oa iPhone oo u nang le ona) 'me u etse mosebetsi oo. Ka mor'a hore sena se etsoe hantle, u tla bona phapang ka lebelo le ho tšepahala (ea ho kopanya / ho kopanya).

Likarabo tsa mongolo tse kenang ho tsoa ho SIRI ha li bue letho ho CarPlay. E khutsisa molumo empa ha ke utloe ha ho baloa.

Fix 1 Try a Forced Restart (hard reset, above) Fix 2 Disconnect from CarPlay (may require forgetting the unit entirely).. remain connected to the OEM Bluetooth source. Active SIRI from the phone - while SIRI is responding, turn the volume UP using the phone volume keys as high as required.

Ke sebelisa Android, ha ke khone ho etsa hore mohala o hokahane ka mokhoa o ts'epahalang ntle le waelese (kapa ho hang).

Android phones are more finicky and iPhones with their wireless connectivity. Make sure the OS is fully up-to-date. Clear the cache on the Android Auto application. The Android OS must be at least version 11. Some phones (TCL, Motorola) seem to have protocols that don't play nice with every system. If you run into this, use a good USB-C cable for the Android Auto Connection instead.

Can the CarPlay/AA system go full screen (10

Only model year 2017+ Lexus units are able to go full screen. If you return to the OEM Lexus menus, if FM or NAV source are able to go full screen, then the CarPlay/AA image will be able to go full screen when the dip switch is set properly (for 10 or 12

When using the CarPlay/AA system on a joystick & split screen (large screen - typically LS or GS) model, the system controls both the OEM controls and CarPlay/AA simultaneously.

n some model LS and GS, the wiring configuration is different than the majority of the Lexus models. See harness modification page after the diagram to solve this problem.

Litokomane / Lisebelisoa

ZZ2 IT3-LEX1 Series Advanced CarPlay/Android Auto Integration [pdf] Buka ea Taelo IT3-LEX15, IT3-LEX17, IT3-LEX19, IT3-LEX1 Series Advanced CarPlay Android Auto Integration, IT3-LEX1 Series, Advanced CarPlay Android Auto Integration, CarPlay Android Auto Integration, Android Auto Integration, Auto Integration, Integration

Litšupiso

• Bukana ea Mosebelisi