ZigBee Smart plug
Bukana ea Mosebelisi

Kenyelletso ea Sehlahisoa

Boima ba sesebelisoa bo ka tlase ho 1 kg. Bophahamo ba ho kenya bo ka tlase ho 2 m bo khothaletsoa.

Litaelo tsa ho kenya

1. Ho tima Ho qoba ts'oaetso ea motlakase, ka kopo ikopanye le morekisi kapa setsebi se tšoanelehang bakeng sa thuso ha u kenya le ho lokisa.
2. Taelo ea lithapo
   Etsa bonnete ba hore mohala o nepahetse pele o kenya sesebelisoa. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Litlhaloso

Mofuta oa Sehlahisoa	Zigbee Smart polaka
Kenyeletso	100-240VAC 50/60Hz
Sephetho	100-240VAC 50/60Hz
Boholo ba Mojaro	10A/13A/16A/20A
ZigBee	IEEE 802.15.4 2.4GHZ
Lintho tse bonahalang	PC VO

Likaroloana

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Remote Control	Kemiso ea Nako
Taolo ea Lentsoe	Karolelano ea Taolo
Sebaka se Bohlale

The above functions are determined by the ZigBee Hub.

Taelo ya Tshebetso

1. Khoasolla APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	Amazon Alexa	Hue

2. Khokahano ea Hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   Echo Plus (mohlala: ZE39KL)
   2nd Gen Echo Show (mohlala: DW84JL)
   2nd Gen Echo Plus (mohlala: L9D29R)
   Samsung SmartThings hub
   Philips Hue
   Haeba khokahano e hloleha, ka kopo, suthisa setsi haufi le mohala oa hau ebe u leka hape.
3. Matlafatsa
   Ka mor'a ho sebelisa matla, sesebelisoa se tla kenya mokhoa oa ho kopanya nakong ea ts'ebeliso ea pele, 'me letšoao la letšoao la LED le benya.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Hokela ho Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Hokela ho SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Hlahisa Fektheri bocha

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

E entsoe chaena

Litokomane / Lisebelisoa

ZigBee Light Switch Module [pdf] Bukana ea Mosebelisi Light Switch Module, Switch Module, Module

Litšupiso

• Bukana ea Mosebelisi