Zennio ZPDEZTPVT Motion Detector e nang le Luminosity Sensor bakeng sa Ho Mounta Siling
LIEKETSENG
EYEZEN TP VT
EyeZen TP vT ho tloha Zennio ke sesebelisoa se ikemiselitseng, har'a mesebetsi e meng, ho lemoha boteng, tekanyo le taolo ea khanya ea phaposi le ho lemoha ho lula teng ka har'a phaposi eo e kentsoeng ho eona. E etselitsoe ho kenya siling kapa siling ea bohata ka lisebelisoa tse kopantsoeng. Likarolo tse hlahelletseng tsa EyeZen TP vT ke:
- Sensor e nang le kutlo e ka hlophisehang.
- LED ho bontša motsamao.
- Mefuta e 'meli ea lilense: e ntšo le e tšoeu.
- Ho lemoha boteng:
- Likanale tse 6 tsa ho bona boteng.
- Ho lemoha boteng bo itšetlehileng ka khanya (ka boikhethelo).
- Ho romelloa nako le nako le ho lieha ho romelloa (binary, scene, HVAC, percentagle).
Ho lemoha ha batho ba lula teng:
- 1x mocha oa ho lemoha ha batho ba lula.
- Sebopeho sa Master / lekhoba.
- Qeta ha lemati le buleha kapa le koala.
- Ho romelloa nako le nako le ho lieha ho romelloa (binary, scene, HVAC, percentagle).
Tekanyo ea khanya:
- Phetoho e ka hlophisoang le offset.
- Ho romela nako le nako kapa ho fetoha ha boleng.
- Likanale tse 2 tsa kamehla tsa taolo ea leseli tse nang le li-setpoints tse lokisehang.
- Tlhophiso ea letsatsi / bosiu.
- Mesebetsi e 10 e ka khonehang, e nang le mekhoa e mengata.
- Tsebiso ea ho otla ha pelo kapa nako le nako "e ntse e phela".
KEKETSO
EyeZen TP vT e hokahana le bese ea KNX ka sehokelo sa KNX se holim'a board. Hang ha sesebelisoa se fuoa matla a tsoang beseng ea KNX, aterese ea motho ka mong le lenaneo le amanang le kopo le ka kopitsoa. Sesebelisoa sena ha se hloke matla leha e le afe a mang a ka ntle kaha se tsamaisoa ka ho feletseng ka bese ea KNX.
- Letšoao la LED.
- Ho boloka selemo.
- Teko/Prog. konopo.
- Teko/Prog. LED.
- Sehokelo sa KNX.
Lintlha tse ka sehloohong tsa sesebelisoa li hlalosoa ka mor'a moo.
- Konopo ea ho etsa mananeo (3): ho tobetsa hakhutšoanyane konopo ena ho beha sesebelisoa mokhoeng oa ho etsa mananeo, ho etsa hore khanya ea LED (4) e amanang le eona e be khubelu.
- Hlokomela: haeba konopo ena e tšoaroa ha u ntse u kenya sesebelisoa ka har'a bese ea KNX, sesebelisoa se tla kena ka mokhoa o sireletsehileng. Boemong bo joalo, LED e tla benya ka bofubelu metsotsoana e meng le e meng e 0.5.
- Tsebiso ea ho lemoha LED (1): e hlahisa lebone le lefubelu ha sensor e bona motsamao.
Ho fumana lintlha tse qaqileng mabapi le likarolo tsa tekheniki tsa sesebelisoa sena, hammoho le ts'ebetso ea ts'ebetso le ts'ebetso ea ts'ireletso, ka kopo sheba ho Datasheet e tsamaellanang, e kopantsoeng le sephutheloana sa mantlha sa sesebelisoa mme se fumaneha ho www.zennio.com.
QALANG LE TAHLEHO EA MATLA
Nakong ea ho qala sesebelisoa, leseli la LED le bonesa bofubelu motsotso o le mong pele mochine o sisinyehang o se o lokile. Ho itšetlehile ka tlhophiso, liketso tse itseng tse khethehileng li tla boela li etsoe nakong ea ho qala. Bakeng sa mohlalaample, sehokahanyi se ka seta hore na likanale tse lemohileng li lokela ho qala li lumelletsoe kapa li holofatsoe.
TIISETSO
KAKARETSO
Kamora ho kenya database e tsamaellanang ho ETS le ho kenyelletsa sesebelisoa ho topology ea morero o lakatsehang, ts'ebetso ea tlhophiso e qala ka ho kenya fensetere ea lisebelisoa tsa lisebelisoa.
ETS PARAMETERISATION
Ho tsoa skrineng sa Kakaretso hoa khonahala ho kenya / ho tima lits'ebetso tsohle tse hlokahalang.
- Tlhahlobo ea Boteng [e nolofalitsoe]1: e nolofalletsa "Detector ea Boteng" sefateng se ka letsohong le letšehali. Ho fumana lintlha tse ling, sheba karolo ea 2.2.
- Logic Functions [e nolofalitsoeng/e holofalitsoeng] e nolofalletsa kapa e tima "Logic Functions" tab ea sefate se ka letsohong le letšehali. Ho fumana lintlha tse ling, sheba karolo ea 2.3.
- Ho otla ha pelo (Tsebiso ea Periodic Alive) [e nolofalitsoe/e holofalitsoe]: e kenyelletsa ntho e le 'ngoe feela morerong (“[Heartbeat] Object to Send '1'”) e tla romelloa nako le nako ka boleng ba "1" ho tsebisa hore sesebelisoa se ntse se sebetsa (se ntse se phela).
Hlokomela: ho romela pele ka mor'a ho khoasolla kapa ho hloleha ha bese ho etsahala ka ho lieha ho fihla ho metsotsoana e 255, ho thibela ho tlala ha libese. Lithomello tse latelang li tsamaisana le nako e behiloeng.
PELE MOTS'I
EyeZen TP vT e kenyelletsa liteishene tse tšeletseng tse ikemetseng tsa ho bona boteng, tse ling tse peli bakeng sa taolo ea mabone a sa khaotseng le e 'ngoe bakeng sa ho lemoha ha motho a le teng.
- Ho lemoha boteng ho kenyelletsa ho romela lintho beseng neng kapa neng ha sesebelisoa se bona 'mele o tsamaeang (kapa o se o sa o shebe) tikolohong ea kamore eo e kentsoeng ho eona.
- Taolo ea kamehla ea khanya e kenyelletsa ho romela litaelo tsa KNX ho sesebelisoa sa dimmer se laolang mabone a ka hare ho phaposi e le hore boemo ba khanya bo lulang bo le teng le haeba mehloli e meng ea leseli e le teng.
- Ho lemoha ha motho a lula teng ke algorithm e lumellang ho tseba hore na sebaka se itseng se tlas'a mosebetsi ho sa tsotellehe hore na motho ea lulang teng o oa sisinyeha kapa che (ke hore, ho sa tsotellehe hore na sesebelisoa se bona boteng ba phaposi kapa che).
E boetse e lumella ho beha libaka tse fapaneng tsa khanya kapa mefuta ea lintho bakeng sa mots'eare le bosiu hammoho le ho kenya tšebetsong kapa ho tima li-LED tsa motsamao. EyeZen TP vT e ka boela ea beha kutlo ea tloaelo ea sensor ea motsamao le ho lekanya khanya ea kamore ka ho etsa liphetoho tse itseng. Tekanyo ena e tla etsoa ho latela mofuta oa lense e khethiloeng. Ka kopo sheba bukana ea "Presence Detector" e fumanehang karolong ea sehlahisoa ea EyeZen TP vT Zennio. websaete (www.zennio.com) bakeng sa lintlha tse qaqileng mabapi le ts'ebetso le tlhophiso ea li-parameter tse amanang.
ETS PARAMETERISATION
Ka skrineng ea Presence Detector, ho phaella ho liparamente tsa ts'ebetso ena, parameter ea mofuta oa lense e kenyelelitsoe.
Mofuta oa Lense [Bosoeu / Botsho]. Ho khetha mofuta oa lense oo EyeZen TP vT e o kentseng, ho tla lumella tekanyo e nepahetseng ea khanya ka sensor.
LIEKETSENG MANTSOE
Mojule ona o etsa hore ho khonehe ho etsa lits'ebetso tsa linomoro le tsa binary ho litekanyetso tse kenang tse amoheloang ho tsoa beseng ea KNX, le ho romella liphetho ka lintho tse ling tsa puisano tse etselitsoeng morero ona ka ho khetheha. EyeZen TP vT e ka kenya tšebetsong mesebetsi e fihlang ho 10 e fapaneng le e ikemetseng, e 'ngoe le e' ngoe ea tsona e ka etsoa ka mokhoa o ikhethileng 'me e na le lits'ebetso tse fihlang ho tse 4 tse latellanang. Ts'ebetso ea ts'ebetso e 'ngoe le e' ngoe e ka its'etleha ho boemo bo ka lokisoang, bo tla hlahlojoa nako le nako ha ts'ebetso e hlahisoa ka lintho tse ikhethileng tsa puisano. Sephetho ka mor'a ho phethahatsa ts'ebetso ea ts'ebetso e ka boela ea hlahlojoa ho latela maemo a itseng 'me ka mor'a moo ea romeloa (kapa che) ho bese ea KNX, e ka etsoang nako le nako ha mosebetsi o etsoa, nako le nako kapa feela ha sephetho se fapane le sa ho qetela. ngoe. Ka kopo sheba bukana ea mosebelisi ea "Logic Functions" e fumanehang tlasa karolo ea sehlahisoa sa EyeZen TP vT leqepheng la lapeng la Zennio (www.zennio.com) bakeng sa lintlha tse qaqileng mabapi le ts'ebetso le tlhophiso ea li-parameter tse amanang.
SEHLOMATHISO I. LITŠOANTŠISO
"Functional range" e bonts'a litekanyetso tseo, ntle le boikemelo ba boleng bofe kapa bofe bo lumelletsoeng ke bese ho ea ka boholo ba ntho, e ka ba ea tšebeliso efe kapa efe kapa e na le moelelo o itseng ka lebaka la litlhaloso kapa lithibelo tse tsoang ho maemo a KNX kapa lenaneo la kopo. ka boyona.
| Nomoro | Boholo | I/O | Lifolakha | Mofuta oa data (DPT) | Range e sebetsang | Lebitso | Mosebetsi |
| 1 | 1 Bit | C – – T – | DPT_Trigger | 0/1 | [Ho otla ha pelo] Object to Romela '1' | Ho romelloa ha '1' Nako le nako | |
| 2 | 1 Byte | I | C - W - - | DPT_SceneNomoro | 0 - 63 | Kenyeletso ea Scene | Boleng ba Scene |
| 3 | 1 Byte | C – – T – | DPT_SceneControl | 0-63; 128-191 | Sephetho sa Scene | Boleng ba Scene | |
| 4 | 2 Byte | I/O | CRW -- | DPT_Coefficient | 0 - 80 | Ntlha ea Tokiso - Sensor ea ka hare | [0, 80] x0.1 |
| 5 | 2 Byte | I/O | CRW -- | DPT_Luminosity_Offset | -200 - 200 | Offset - Sensor ea ka hare | [-200, 200] Luxes |
| 6 | 2 Byte | O | CR – T – | DPT_Boleng_Lux | 0 - 2000 | Leseli - Sensor ka hare | Luxes |
| 10 | 1 Bit | I | C - W - - | DPT_DayNight | 0/1 | Motšehare/Bosiu | 0 = Letsatsi; 1 = Bosiu |
| 1 Bit | I | C - W - - | DPT_DayNight | 0/1 | Motšehare/Bosiu | 0 = Bosiu; 1 = Letsatsi | |
|
11 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Lebone la LED | 0 = Tlosa; 1 = Nolofatsa |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Lebone la LED | 0 = Tlosa; 1 = Nontsha Feela Motšehare | |
| 12 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | Nako: Lintho tse hlahisoang ke tsona (Sekala) | 0-100% |
|
13 |
1 Byte |
O |
CR – T – |
Tsela ea DPT_HVACMode |
1=Matšeliso 2=E eme 3=Moruo 4=Tsireletso ea Moaho |
Nako: Sephetho (HVAC) |
Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho |
| 14 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | Nako: Sephetho (Binary) | Binary Boleng |
| 1 Bit | C – – T – | DPT_Trigger | 1 | Ho lula: Sephetho sa Makhoba | 1 = Motsamao o fumanwe | ||
| 15 | 1 Bit | I | C - W - - | DPT_Fesetere_Monyako | 0/1 | Nako ea ho lula: Ho qala | Boleng ba Binary ho Qalisa ho Fumana Sebaka |
| 16 | 1 Bit | I | C - W - - | DPT_Trigger | 0/1 | Ho lula: Kenyeletso ea Makhoba | 0 = 1 = Ho fumanoa ho sesebelisoa sa makhoba |
| 17 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | Ho lula: Nako ea ho leta | 0-65535 s. |
| 18 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 1 - 65535 | Nako: Nako ea ho Mamela | 1-65535 s. |
| 19 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Ho lula: Lotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Ho lula: Lotlolo | 0 = Notlela; 1 = Notlolla | |
| 20 | 1 Bit | O | CR – T – | DPT_Occupancy | 0/1 | Sebaka sa bolulo: Naha ea ho lula | 0 = Ha a phathahane; 1 = E tšoarehile |
| 21 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | Kutlo ea kutlo | 1-100% |
| 25, 35, 45, 55, 65, 75 | 1 Bit | I | C - W - - | DPT_Trigger | 0/1 | [Cx] Ho Fumana Motion oa Kantle | 0 = 1 = Motsamao o bonoa ke kutlo e kantle |
| 26, 36, 46, 56, 66, 76 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [Cx] Sephetho (Sekala) | 0-100% |
|
27, 37, 47, 57, 67, 77 |
1 Byte |
O |
CR – T – |
Tsela ea DPT_HVACMode |
1=Matšeliso 2=E eme 3=Moruo
4=Tshireletso ea Moaho |
[Cx] Sephetho (HVAC) |
Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho |
| 28, 38, 48, 58, 68, 78 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Cx] Sephetho (Binary) | Binary Boleng |
| 29, 39, 49, 59, 69, 79 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx] Boemo ba ho notlela | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx] Boemo ba ho notlela | 0 = Notlela; 1 = Notlolla | |
| 30, 40, 50, 60, 70, 80 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Naha ea Matla | 0 = Ha ho Khethollo; 1 = Ho fumanoa |
| 31, 41, 51, 61, 71, 81 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Phetoho ea kantle | 0 = Ha ho Khethollo; 1 = Ho fumanoa |
| 32, 42, 52, 62, 72, 82 | 2 Byte | I/O | CRW -- | DPT_TimePeriodSec | 1 - 65535 | [Cx] Bolelele ba ho Lemoha | 1-65535 s. |
| 85, 101 | 1 Bit | I | C - W - - | DPT_Trigger | 0/1 | [CLCx] Ho Fumana Motsamao oa Kantle | 0 = 1 = Motsamao o bonoa ke kutlo e kantle |
| 86, 102 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [CLCx] Boemo ba Notlela | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [CLCx] Boemo ba Notlela | 0 = Notlela; 1 = Notlolla | |
| 87, 103 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [CLCx] Naha ea Mabotho | 0 = Ha ho Khethollo; 1 = Ho fumanoa |
| 88, 104 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [CLCx] Phetoho ea kantle | 0 = Ha ho Khethollo; 1 = Ho fumanoa |
| 89, 105 | 2 Byte | I | C - W - - | DPT_Boleng_Lux | 1 - 2000 | [CLCx] Sebaka | Setpoint Boleng (1-2000) |
| 2 Byte | I | C - W - - | DPT_Boleng_Lux | 1 - 2000 | [CLCx] Setpoint Motšehare | Setpoint Boleng (1-2000) | |
| 90, 106 | 2 Byte | I | C - W - - | DPT_Boleng_Lux | 1 - 2000 | [CLCx] Sebaka sa Bosiu | Setpoint Boleng (1-2000) |
| 91, 107 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [CLCx] Boleng bo Fokolang | Theko e Nyenyehang (%) |
| 92, 108 | 2 Byte | I/O | CRW -- | DPT_TimePeriodSec | 1 - 65535 | [CLCx] Bolelele ba ho Lemoha | 1-65535 s. |
| 94, 110 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [CLCx] Taolo ea Matsoho: Ho Bula/Ho tima (Kenyo) | Taolo ea 1-Bit |
|
95, 111 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Emisa)
0x1 (Dec. ka 100%) … 0x7 (Dec. ka 1%) 0x8 (Emisa) 0xD (Inc. ka 100%) … 0xF (Inc. ka 1%) |
[CLCx] Taolo ea Manual: Relative Dimming (Kenyo) |
Taolo ea 4-Bit |
| 96, 112 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [CLCx] Taolo ea Matsoho: Ho fifala ka ho Fetisisa (Ho Kena) | Taolo ea 1-Byte |
| 97, 113 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [CLCx] Taolo ea Matsoho: Ho Bula/Ho tima (Se hlahisoang) | Taolo ea 1-Bit |
|
98, 114 |
4 Bit |
O |
CR – T – |
DPT_Control_Dimming |
0x0 (Emisa)
0x1 (Dec. ka 100%) … 0x7 (Dec. ka 1%) 0x8 (Emisa) 0xD (Inc. ka 100%) … 0xF (Inc. ka 1%) |
[CLCx] Taolo ea Manual: Relative Dimming (Output) |
Taolo ea 4-Bit |
| 99, 115 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [CLCx] Taolo ea Matsoho | 0 = Tlosa; 1 = Nolofatsa |
| 100, 116 | 1 Bit | O | CR – T – | DPT_Etsa | 0/1 | [CLCx] Taolo ea Manual (Boemo) | 0 = E holofetse; 1 = E nolofalitsoe |
| 134, 135, 136, 137, 138, 139,
140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165 |
1 Bit |
I |
C - W - - |
DPT_Bool |
0/1 |
[LF] (1-Bit) Keno ea Lintlha x |
Binary Data Kenya (0/1) |
| 166, 167, 168, 169, 170, 171,
172, 173, 174, 175, 176, 177, 178, 179, 180, 181 |
1 Byte |
I |
C - W - - |
DPT_Value_1_Ucount |
0 - 255 |
[LF] (1-Byte) Kenyo ea Lintlha x |
Keno ea Lintlha tsa 1-Byte (0-255) |
| 182, 183, 184, 185, 186, 187,
188, 189, 190, 191, 192, 193, 194, 195, 196, 197 |
2 Byte |
I |
C - W - - |
DPT_Value_2_Ucount | 0 - 65535 | [LF] (2-Byte) Kenyo ea Lintlha x |
2-Byte Ho Kena ha Boitsebiso |
| DPT_Value_2_Palo | -32768 -32767 | ||||||
| 9.xxx | -671088.64 - 670433.28 | ||||||
| 198, 199, 200, 201, 202, 203,
204, 205 |
4 Byte | I | C - W - - | DPT_Value_4_Palo | -2147483648 - 2147483647 | [LF] (4-Byte) Kenyo ea Lintlha x | 4-Byte Ho Kena ha Boitsebiso |
|
206, 207, 208, 209, 210, 211, 212, 213, 214, 215 |
1 Bit | O | CR – T – | DPT_Bool | 0/1 | [LF] Mosebetsi x – Sephetho | (1-Bit) Boolean |
| 1 Byte | O | CR – T – | DPT_Value_1_Ucount | 0 - 255 | [LF] Mosebetsi x – Sephetho | (1-Byte) Ha ea saena | |
| 2 Byte | O | CR – T – | DPT_Value_2_Ucount | 0 - 65535 | [LF] Mosebetsi x – Sephetho | (2-Byte) Ha ea saena | |
| 4 Byte | O | CR – T – | DPT_Value_4_Palo | -2147483648 - 2147483647 | [LF] Mosebetsi x – Sephetho | (4-Byte) E saennoe | |
| 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [LF] Mosebetsi x – Sephetho | (1-Byte) Liphesentetage | |
| 2 Byte | O | CR – T – | DPT_Value_2_Palo | -32768 - 32767 | [LF] Mosebetsi x – Sephetho | (2-Byte) E saennoe | |
| 2 Byte | O | CR – T – | 9.xxx | -671088.64 - 670433.28 | [LF] Mosebetsi x – Sephetho | (2-Byte) Phapang |
Kena 'me u re romelle lipotso tsa hau mabapi le lisebelisoa tsa Zennio:
https://support.zennio.com
Zennio Avance y Tecnología SL C/ Río Jarama, 132. Nave P-8.11 45007 Toledo (Spain).
Mohala +34 925 232 002. www.zennio.com info@zennio.com
Litokomane / Lisebelisoa
 |
Zennio ZPDEZTPVT Motion Detector e nang le Luminosity Sensor bakeng sa Ho Mounta Siling [pdf] Bukana ea Mosebelisi ZPDEZTPVT Motion Detector e nang le Luminosity Mounting for Ceiling Mounting, ZPDEZTPVT, Motion Detector e nang le Luminosity Sensor for Ceiling Mounting, Ceiling Mounting, Luminosity Sensor, Sensor |
