Presentia C v2

Sesebelisoa sa Boteng se nang le Sensor ea Luminosity
bakeng sa ho Mounting siling
Setšoantšo sa ZPDC30LV2

Mofuta oa lenaneo la kopo: [1.4]
Khatiso ea tataiso ea mosebelisi: [1.4]_b
www.zennio.com

MOEKETSI MOSEBETSI

LIEKETSENG TOKOMANA

Phetolelo	Liphetoho	Leqephe (ma)
[1.4]_b	Liphetoho tokomaneng: Tokiso ya phoso tafoleng ya dintho.	-
	Liphetoho lenaneong la kopo: Ntlafatso ea Mesebetsi ea Maikutlo le li-module tsa Tetector ea Boteng.	-

LIEKETSENG

1.1 PRESENTIA C v2
Presencia C v2 ho tloha ho Zennio ke sesebelisoa se ikemiselitseng, har'a mesebetsi e meng, ho lemoha boteng, tekanyo, le taolo ea khanya ea phaposi, le ho lemoha ho lula teng ka har'a phaposi eo e kentsoeng ho eona. E etselitsoe ho kenya siling kapa siling ea bohata ka lisebelisoa tse kopantsoeng.

Likarolo tse hlahelletseng tsa Presencia C v2 ke:
4 li-sensor e nang le maikutlo a ka lokisehang.
4 li-LED ho bontsha tshisinyo.
Ho lemoha boteng:

•  Likanale tse 6 tsa ho bona boteng.
• Ho lemoha boteng bo itšetlehileng ka khanya (ka boikhethelo).
• Ho romelloa nako le nako le ho lieha ho romelloa (binary, scene, HVAC, percentagle).

Ho lemoha ha batho ba lula teng:

• 1x mocha oa ho lemoha ha batho ba lula.
•  Sebopeho sa Master / lekhoba.
• Qeta ha lemati le buleha kapa le koala.
• Ho romelloa nako le nako le ho lieha ho romelloa (binary, scene, HVAC, percentagle).

Tekanyo ea khanya:

•  Phetoho e ka hlophisoang le offset.
•  Ho romela nako le nako kapa ho fetoha ha boleng.
  2 taolo ea khanya e sa feleng likanale tse nang le li-setpoints tse lokisehang.
  10 e ka khonehang, e sebetsang ka bongata mesebetsi ea kelello.
  Ho otla ha pelo kapa tsebiso nako le nako “o ntse a phela”.
  Motšeare / bosiu tlhophiso.

1.2 HO KENYA

Presencia C v2 e hokela bese ea KNX ka sehokelo sa sekepe sa KNX.
Hang ha sesebelisoa se fuoa matla a tsoang beseng ea KNX, aterese ea motho ka mong le lenaneo le amanang le kopo le ka khoasolloa.
Sesebelisoa sena ha se hloke matla leha e le afe a mang a ka ntle kaha se tsamaisoa ka ho feletseng ka bese ea KNX.

Setšoantšo sa 1. Presencia C v2. Lintlha

1. Matšoao a tataiso.
2. Teko/Prog. LED.
3. Li-LED tsa tsebiso ea ho lemoha.
4. Motheo.
5. Teko/Prog. konopo.
6. Ho boloka selemo.
7. Sehokelo sa KNX.

Lintlha tse ka sehloohong tsa sesebelisoa li hlalosoa ka mor'a moo.
Konopo ea ho etsa mananeo (5): ho tobetsa hakhutšoanyane konopo ena ho beha sesebelisoa mofuteng oa lenaneo, ho etsa hore khanya ea LED (2) e amanang le eona e be khubelu.
Hlokomela: haeba konopo ena e tšoaroa ha u ntse u kenya sesebelisoa ka har'a bese ea KNX, sesebelisoa se tla kena ho mokhoa o bolokehileng. Boemong bo joalo, LED e tla benya ka bofubelu metsotsoana e meng le e meng ea 0.5.
Li-LED tsa tsebiso ea ho lemoha (3): e 'ngoe le e 'ngoe ea tsona e ntša lebone le khanyang neng le neng ha sensor e amanang le sebaka seo e sheba motsamao.

Ho fumana lintlha tse qaqileng mabapi le likarolo tsa tekheniki tsa sesebelisoa sena, hammoho le ts'ebetso ea ho kenya le lits'ebetso tsa ts'ireletso, ka kopo sheba tse tsamaellanang.
Leqephe la lintlha, e phuthetsoe ka sephutheloana sa mantlha sa sesebelisoa mme e fumaneha hape ho www.zennio.com.

1.3 HO QALA LE TAHLEHELO EA MATLA

Nakong ea ho qala ha sesebelisoa, Test/Prog. LED e tla benya ka 'mala o moputsoa motsotso o le mong pele li-sensor tsa motsamao li lokile.

Ho ipapisitse le tlhophiso, liketso tse ling tse ikhethileng le tsona li tla etsoa nakong ea ho qala. Bakeng sa mohlalaample, sehokahanyi se ka beha hore na likanale tsa ho lemoha li lokela
qalo e nolofalitsoe kapa e koetsoe. Ka kopo sheba likarolo tse latelang tsa tokomane ena bakeng sa lintlha tse ling.

Ka lehlakoreng le leng, ha motlakase oa libese o senyeha, sesebelisoa se tla sitisa liketso leha e le life tse ntseng li le teng 'me se tla boloka boemo ba sona e le hore se ka tsosolosoa hang ha motlakase o felile.
buseletsoa.

TIISETSO

2.1 KA kakaretso

Kamora ho kenya database e tsamaellanang ho ETS le ho kenyelletsa sesebelisoa ho topology ea morero o lakatsehang, ts'ebetso ea tlhophiso e qala ka ho kenya fensetere ea lisebelisoa tsa lisebelisoa.

ETS PARAMETERISATION

Ho tloha Kakaretso skrineng, hoa khonahala ho kenya / ho tima lits'ebetso tsohle tse hlokahalang.

Ho Fumana Boteng [e nolofalitsoe]¹: e nolofalletsa konopo ea "Presence Detector" sefateng se ka ho le letšehali. Ho fumana lintlha tse ling, sheba karolo ea 2.2.

Mesebetsi e utloahalang [e nolofalitsoe/e holofalitsoe] e nolofalletsa kapa e tima "Logic Functions" ho sefate se ka letsohong le letšehali. Ho fumana lintlha tse ling, sheba karolo ea 2.3.

Ho otla ha pelo (Periodic Alive Tsebiso) [e nolofalitsoe/e holofalitsoe]: e kenyelletsa ntho e le 'ngoe feela morerong (“[Ho otla ha pelo] Object to Romela '1'”) e tla romelloa nako le nako ka boleng ba "1" ho tsebisa hore sesebelisoa se ntse se sebetsa (se ntse se phela).

¹Litekanyetso tsa kamehla tsa paramethara ka 'ngoe li tla totobatsoa ka boputsoa tokomaneng ena, ka tsela e latelang: [ka ho feletseng/likhetho tse ling].

Hlokomela: ho romela pele ka mor'a ho khoasolla kapa ho hloleha ha bese ho etsahala ka ho lieha ho fihla ho metsotsoana e 255, ho thibela ho tlala ha libese. Lithomello tse latelang li tsamaisana le nako e behiloeng.

2.2 SEHLOLI SA BOteng

Presentia C v2 e kenyelletsa likanale tse tšeletseng tse ikemetseng tsa ho bona boteng, tse ling tse peli bakeng sa taolo ea mabone a sa khaotseng le e 'ngoe bakeng sa ho lemoha ha motho a le teng.

Ho lemoha ho ba teng e kenyelletsa ho romela lintho beseng neng kapa neng ha sesebelisoa se bona 'mele o tsamaeang (kapa ha o sa o sheba) tikolohong ea phaposi eo e kentsoeng ho eona.

Taolo ea khanya ea kamehla e kenyelletsa ho romela litaelo tsa KNX ho sesebelisoa sa dimmer se laolang mabone a ka kamoreng e le hore boemo ba khanya bo lulang bo le teng le haeba mehloli e meng ea leseli e le teng.

Ho lemoha ho ba teng ke algorithm e lumellang ho khetholla, ka mekhoa e mengata ea li-sensor, hore na sebaka se itseng se tlas'a mosebetsi ho sa tsotellehe hore na motho ea lulang teng o sisinyeha kapa che (ke hore, ho sa tsotellehe hore na sesebelisoa se lemoha ho ba teng ka kamoreng kapa che).

Ka kopo sheba bukana e khethehileng "Mohloli oa Boteng” e fumanehang karolong ea sehlahisoa ea Presencia C v2 ho Zennio websaete (www.zennio.com) bakeng sa lintlha tse qaqileng mabapi le ts'ebetso le tlhophiso ea li-parameter tse amanang.

2.3 MESEBETSI EA MANTSOE

Mojule ona o etsa hore ho khonehe ho etsa lits'ebetso tsa linomoro le tsa binary ho litekanyetso tse kenang tse amoheloang ho tsoa beseng ea KNX le ho romella liphetho ka lintho tse ling tsa puisano tse etselitsoeng morero ona.

Presentia C v2 e ka kenya ts'ebetsong ho fihlela Mesebetsi e 10 e fapaneng le e ikemetseng, e 'ngoe le e' ngoe ea tsona e ka etsoa ka mokhoa o ikhethileng ebile e na le ho fihlela ho 4 ts'ebetso e latellanang.

Ts'ebetso ea ts'ebetso e 'ngoe le e' ngoe e ka itšetleha ka mokhoa o hlophisitsoeng boemo, e tla hlahlojoa nako le nako ha mosebetsi o etsoa hlohlelletse ka ho khetheha, parameterisable
dintho tsa puisano. Sephetho ka mor'a ho phethahatsa ts'ebetso ea ts'ebetso e ka boela ea hlahlojoa ho latela tse itseng maemo 'me ka mor'a moo e rometsoe (kapa che) ho bese ea KNX, e ka etsoang nako le nako ha mosebetsi o etsoa, ​​nako le nako kapa feela ha sephetho se fapane le sa ho qetela.

Ka kopo sheba "Mesebetsi e utloahalang” bukana ea mosebelisi e fumaneha tlasa karolo ea sehlahisoa sa Presentia C v2 leqepheng la lapeng la Zennio (www.zennio.com) bakeng sa lintlha tse qaqileng
mabapi le ts'ebetso le tlhophiso ea liparamente tse amanang.

SEHLOMATHISO I. LITŠOANTŠISO

“Sebaka sa tšebetso” e bonts'a litekanyetso tseo, ka boikemelo ba boleng bofe kapa bofe bo lumelletsoeng ke bese ho latela boholo ba ntho, bo ka bang le ts'ebeliso efe kapa efe kapa bo na le moelelo o itseng ka lebaka la litlhaloso kapa lithibelo tse tsoang ho maemo a mabeli a KNX kapa lenaneo la kopo ka bolona.

Nomoro	Boholo	I/O	Lifolakha	Mofuta oa data (DPT)	Range e sebetsang	Lebitso	Mosebetsi
1	1 Bit		C – – T –	Sesebelisoa sa DPT	0/1	[Ho otla ha pelo) E hana ho Romela '1'	Ho romelloa ha '1' Nako le nako
2	1 Byte	I	C - W --	DPT_SceneNomoro	0 - 63	Kenyeletso ea Scene	Boleng ba Scene
3	1 Byte		C – – T –	DPT_SceneControl	0-63; 128-191	Sephetho sa Scene	Boleng ba Scene
4	2 Byte	I/O	C RW --	1. xxx	0/1	Ntlha ea Tokiso - Sensor ea ka hare	[0, 80] x0.1
5	2 Byte	I/O	C RW --	1.xxx	0/1	Offset - Sensor ea ka hare	[-200, 200] Luxes
6	2 Byte	0	CR – T –	DPT_Boleng_Lux		Leseli - Sensor ka hare	Luxes
10	1 Bit	I	C - W --	DPT_DayNight	0/1	Motšehare/Bosiu	0 = Letsatsi; 1 = Bosiu
	1 Bit	I	C - W --	DPT_DayNight	0/1	Motšehare/Bosiu	0 = Bosiu; 1 = Letsatsi
11	1 Bit	I	C - W --	DPT_Etsa	0/1	Li-LED tsa ho lemoha	0 = Tlosa; 1 = Nolofatsa
	1 Bit	I	C - W --	OPT_Enable	0/1	Li-LED tsa ho lemoha	0 = Tlosa; 1 = Nontsha Feela Motšehare
12	1 Bit	0	C R - T -	OPT_Switch	0/1	Nako: Sephetho (Binary)	Binary Boleng
	1 Bit		C-- T -	Qala	0/1	Ho lula: Sephetho sa Makhoba	1 = Motsamao o fumanwe
13	1 Byte	0	CR – T –	DPT_Scaling	0% - 100%	Nako: Lintho tse hlahisoang ke tsona (Sekala)	0-100%
14	1 Byte	0	CR – T –	Tsela ea DPT_HVACMode	1=Matšeliso 2=E eme 3=Moruo 4=Tsireletso ea Moaho	Nako: Sephetho (HVAC)	Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho
15	1 Bit	I	C - W --	DPT_Fesetere_Monyako	0/1	Nako ea ho lula: Ho qala	Boleng ba ho Qetella ho Khetholla Binary ea ho lula
16	1 Bit	I	C - W --	Qala	0/1	Ho lula: Kenyeletso ea Makhoba	1 = Ho fumanoa ho sesebelisoa sa makhoba
17	2 Byte	I	C - W --	DPT_TimePeriodSec	0 - 65535	Ho lula: Nako ea ho leta	0-65535 s.
18	2 Byte	I	C - W --	OPT_TimePeriodSec	0 - 65535	Nako: Nako ea ho Mamela	1-65535 s.
19	1 Bit	I	C - W --	DPT_Etsa	0/1	Ho lula: Lotlolo	0 = Notlolla; 1 = Notlela
	1 Bit	I	C - W --	DPT_Etsa	0/1	Ho lula: Lotlolo	0 = Notlela; 1 = Notlolla
20	1 Bit	0	CR – T –	DPT_Occupancy	0/1	Sebaka sa bolulo: Naha ea ho lula	0 = Ha a phathahane; 1 = E tšoarehile
21	1 Byte	I	C - W --	DPT_Scaling	0% - 100%	Kutlo ea 1	1-100%
22	1 Byte	I	C - W --	DPT_Scaling	0% - 100%	Kutlo ea 2	1-100%
23	1 Byte	I	C - W --	DPT_Scalinq	0% - 100%	Kutlo ea 3	1-100%
24	1 Byte	I	C - W --	OPT_Scalinq	0% - 100%	Kutlo ea 4	1-100%

 

25,

35,

45,

55,

65,

75

1 Bit

I

C - W - -

DPT e qala -

0/1

[Cx) Ho Fumana Motsamao oa Kantle

1 = Motsamao o bonoa ke sensor e kantle

26,

36,

46,

56,

66,

76

1 Bit

0

CR – T –

DPT_Switch

0/1

[Cx] Sephetho (Binary)

Binary Boleng

27, 28,

37, 38,

47, 48,

57, 58,

67, 68,

77 78

1 Byte

0

CR – T –

DPT_Scaling

0% - 100%

[Cx] Sephetho (Sekala)

0-100%

1 Byte

0

CR – T –

Tsela ea DPT_HVACMode

1=Matšeliso 2=Maemo3 =Moruo 4=Mohaho Tshireletso

[Cx) Sephetho (HVAC)

Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho

29, 30, 31, 32,

39, 40, 41, 42,

49, 50, 51. 52,

59, 60, 61, 62,

69, 70, 71, 72,

79 80 81 82

1 Bit

I

C - W - -

DPT_Etsa

0/1

[Cx] Boemo ba ho notlela

0 = Notlolla; 1 = Notlela

1 Bit

1

C - W - -

DPT_Etsa

0/1

[Cx) Boemo ba ho notlela

0 4 Senotlolo; 1 4 Notlolla

1 Bit

I

C - W - -

Qala

0/1

[Cx) Naha ea Matla

0 4 Ha ho Khethollo; 1 ke Ho fumana

1 Bit

1

C - W - -

Qala

0/1

[Cx] Phetoho ea kantle

0 sz Ha ho Khethollo; 1 = Ho fumanoa

2 Byte

I/O

CRW --

DPT_TimePeriodSec

0 - 65535

[Cx] Bolelele ba ho Lemoha

1-65535 s.

85,

101

1 Bit

I

C - W - -

DPT e qala -

0/1

[CLCx] Ho Fumana Motsamao oa Kantle

kantle 1 = Motion o bonoa ke sensor ea exte

86, 87. 88,

102 103 104

1 Bit

I

C - W - -

DPT_Etsa

0/1

[CLCx] Boemo ba Notlela

0 = Notlolla; 1 = Notlela

1 Bit

I

C - W - -

DPT_Etsa

0/1

[CLCx] Boemo ba Notlela

0 = Notlela; 1 = Notlolla

1 Bit

I

C - W - -

Qala

0/1

[CLCx] Naha ea Mabotho

0 = Ha ho Khethollo; 1 = Ho fumanoa

1 Bit

I

C - W - -

Qala

0/1

[CLCx] Phetoho ea kantle

0 = Ha ho Khethollo; 1 .. Ho lemoha

89, 90,

105 106

2 Byte

1

C - W - -

OPT_Boleng_Lux

[CLCx] Sebaka

Setpoint Boleng (1-2000)

2 Byte

I

C - W - -

DPT_Boleng_Lux

[CLOc] Setpoint Motšehare

Setpoint Boleng (1-2000)

1 Byte

1

C - W - -

DPT_Scaling

0% - 100%

[CLCx] Sebaka

Setpoint Boleng (1-100)%

1 Byte

I

C - W - -

DPT_Scaling

0% - 100%

[CLCx] Setpoint Motšehare

Setpoint Boleng (1-100)%

2 Byte

I

C - W - -

DPT_Boleng_Lux

[CLCx] Sebaka sa Bosiu

Setpoint Boleng (1-2000)

1 Byte

I

C - W - -

DPT_Scaling

0% - 100%

(CLCx) Setpoint Bosiu

Setpoint Boleng (1-100)%

91,

107

1 Byte

0

CR – T –

DPT_Scaling

0% - 100%

[CLCx] Boleng bo Fokolang

Theko e Nyenyehang (%)

92, 94, 95, 96,

108 110 111 112

2 Byte

I/O

CRW --

DPT_TimePeriodSec

0 - 65535

[CLCx] Bolelele ba ho Lemoha

1-65535 s.

1 Bit

I

C - W - -

DPT_Switch

0/1

[CLCx] Taolo ea Matsoho: Ho Bula/Ho tima (Kenyo)

Taolo ea 1-Bit

4 Bit

1

C - W - -

DPT_Control_Dimming

Ox0 (Emisa) Oxl (Dec. ka 100%)·-• 0x7 (Dec. ka 1%) Ox8 (Emisa) OxD (Inc. ka 100%) ·-• OxF (Inc. ka 1%)

[CLCx] Taolo ea Manual: Relative Dimming (Kenyo)

Taolo ea 4-Bit

1 Byte

I

C - W - -

DPT_Scaling

0% - 100%

[CLOc] Taolo ea Matsoho: Ho Finyella ho Felletseng (Kenyo)

Taolo ea 1-Byte

97,

113

1 Bit

0

CR – T –

DPT_Switch

0/1

[CLCx] Taolo ea Matsoho: Ho Bula/Ho tima (Se hlahisoang)

Taolo ea 1-Bit

98,

114

4 Bit

0

CR – T –

DPT_Control_Dimming

Ox0 (Emisa) Oxl (Dec. ka 100%) · -•

[CLCx] Taolo ea Manual: Relative Dimming (Output)

Taolo ea 4-Bit

 

								0x7 (Dec. ka 1%) 0x8 (Emisa) 0xD (Inc. ka 100%)••• OxF (Inc. ka 1%)
	99,	115		1 Bit	I	C - W --	DPT E nolofalletsa	0/1	[CLCx] Taolo ea Matsoho	0 = Tlosa; 1 = Nolofatsa
	100,	116		1 Bit	0	CR - T -	DPT E nolofalletsa	0/1	[CLCx] Taolo ea Manual (Boemo)	0 = E holofetse; 1 = E nolofalitsoe
117, 121, 125, 129, 133, 137, 141, 145,	118, 122, 126, 130, 134, 138, 142, 146,	119, 123, 127, 131, 135, 139, 143, 147,	120, 124, 128, 132, 136, 140, 144, 148	1 Bit	I	U	DPT Bool	0/1	[LF] (1-Bit) Keno ea Lintlha x	Binary Data Kenya (0/1)
149, 153, 157, 161,	150, 154, 158, 162,	151, 155, 159, 163,	152, 156, 160, 164	1 Byte	I	U	DPT_Value_1_Ucount	0 - 255	[LF] (1-Byte) Kenyo ea Lintlha x	Keno ea Lintlha tsa 1-Byte (0-255)
165, 169, 173,177,	166, 170, 174, 178,	167, 171, 175, 179,	168, 172, 176, 180	2 Byte	I	U	DPT_Value_2_Ucount	0 - 65535	[LF] (2-Byte) Kenyo ea Lintlha x	2-Byte Ho Kena ha Boitsebiso
							DPT Boleng ba 2 Bala	-32768 - 32767
							DPT_Value_Temp o	-273, 00 - 670760, 00
181, 185,	182, 186,	183, 187,	184, 188	4 Byte	I	C - W --	DPT_Value_4_Palo	-2147483648 - 2147483647	[LF] (4-Byte) Kenyo ea Lintlha x	4-Byte Ho Kena ha Boitsebiso
189, 193,	190, 194, 197,	191, 195, 198	192 196,	1 Bit	0	CR – T -	DPT_Bool	0/1	[LF] Mosebetsi x – Sephetho	(1-Bit) Boolean
				1 Byte	0	CR - T -	DPT_Value_1_Ucount	0 - 255	[LF] Mosebetsi x – Sephetho	(1-Byte) Ha ea saena
				2 Byte	0	CR - T -	DPT_Value_2_Ucount	0 - 65535	[LF] Mosebetsi x – Sephetho	(2-Byte) Ha ea saena
				4 Byte	0	CR - T -	DPT_Value_4_Palo	-2147483648 - 2147483647	[LF] Mosebetsi x – Sephetho	(4-Byte) E saennoe
				1 Byte	0	CR - T -	DPT_Scaling	0% - 100%	[LF] Mosebetsi x – Sephetho	(1-Byte) Liphesentetage
				2 Byte	0	CR - T -	DPT_Value_2_Palo	-32768 - 32767	[LF] Mosebetsi x – Sephetho	(2-Byte) E saennoe
				2 Byte	0	CR - T -	9. xxx	-671088.64 - 670433.28	[LF] Mosebetsi x – Sephetho	(2-Byte) Phapang

Kena 'me u re romelle lipotso tsa hau
mabapi le lisebelisoa tsa Zennio:
http://support.zennio.com

Zennio Avance le Tecnología SL
C/ Río Jarama, 132. Nave P-8.11
45007 Toledo (Spain).
Mohala +34 925 232 002.
www.zennio.com
info@zennio.com

https://www.zennio.com/
Tšehetso ea tekheniki: https://support.zennio.com/

Litokomane / Lisebelisoa

Sebui sa Boteng sa Zennio ZPDC30LV2 se nang le Sensor ea Luminosity bakeng sa ho Holima Siling [pdf] Bukana ea Mosebelisi ZPDC30LV2, Mohloli oa Boteng o nang le Sensor ea Leseli bakeng sa ho Beha Siling, ZPDC30LV2 Presence Detector e nang le Luminosity Sensor bakeng sa ho Mounta Siling, Luminosity Sensor for Ceiling Mounting.

Litšupiso

• Bukana ea Mosebelisi