Litaba
pata
Zennio ZDILX4V2 Channel Constant Voltagle PWM Dimmer
Tlhahisoleseding ya Sehlahiswa
- Lebitso la Sehlahiswa: Lumento X4 v2, Lumento X3 v2, Lumento X2 v2
- Tlhaloso: 4 / 3 / 2 - Channel Constant Voltage PWM Dimmer bakeng sa DC LED Loads
- Nomoro ea Mohlala: ZDILX4V2, ZDILX3V2, ZDILX2V2
- Mofuta oa Lenaneo la Kopo: 1.0
- User Manual Version: 1.0_a
- Moetsi: Zennio
- Websebaka: https://www.zennio.com
Litaelo tsa Tšebeliso ea Sehlahisoa
- Khetha mofuta o nepahetseng oa Lumento X (X4 v2, X3 v2, kapa X2 v2) ho latela palo ea likanale tse hlahisoang tse hlokahalang.
- Hokela Lumento X ho constant-voltage DC LED luminaires.
- Lokisa likanale tsa tlhahiso ho latela mofuta oa module oa LED le palo ea liphetho tse fumanehang.
- Khetha ho tsoa ho litlhophiso tse latelang tsa tlhahiso:
- Mecha ea batho ka bomong: E lumella taolo e ikemetseng le e bapileng holim'a likanale tse fapaneng tsa tlhahiso.
- RGBW (ho Lumento X4 v2 feela): E lumella taolo e kopanetsoeng holim'a mojule oa LED oa mebala e mene. Mocha o hlahisoang o na le likarolo tsa mebala (R, G, B, le W) tse laoloang ka kopanelo empa ka maemo a khanya a fapaneng.
- RGB + W / RGB (feela ho Lumento X4 v2 le Lumento X3 v2 ka ho latellana): E lumella ho laola mojule oa LED oa mebala e meraro. Ho Lumento X4 v2, ho na le mocha o ikemetseng o mosoeu ho phaella ho mocha oa RGB.
- Tunable White: E lumella ho laola likanale tsa taolo bakeng sa mocheso oa 'mala o mosoeu.
- Iketsetse meeli ea ho fifala le linako bakeng sa taolo ea khanya.
- Etsa liketsahalo le tatelano bakeng sa maemo a fapaneng a mabone.
- Beha lintho tse behiloeng nakong joalo ka li-timers tse bonolo, tatellano e benyang, le ho tima ka ho iketsa.
- Sebelisa li-control tse tloaelehileng tsa On/Off bakeng sa litlhoko tse ikhethang.
- Fumana le ho amohela litsebiso bakeng sa liphoso.
- Sebelisa tšobotsi ea Master Supply Relay Master bakeng sa taolo e bonolo ea sete ea mabone.
- Ka bowena Sebetsa le ho laola dikanale tsa tlhahiso.
- Nka advantage ea mesebetsi ea logic ea ts'ebetso e mengata eo u ka e khethang.
- Lumella ho otla ha pelo kapa tsebiso ea nako le nako e ntseng e phela.
- Etsa bonnete ba hore KNX Security bakeng sa ts'ebetso e sireletsehileng.
Bakeng sa tšehetso ea tekheniki, etela: https://support.zennio.com
Lumento X4 v2
Lumento X3 v2
Lumento X2 v2
4 / 3 / 2 - Channel Constant Voltage PWM Dimmer bakeng sa DC LED Loads
ZDILX4V2
ZDILX3V2
ZDILX2V2 MANAKO EA MOSEBETSI
Phetolelo ea Lenaneo la Kopo: [1.0] Version ea Buka ea Mosebelisi: [1.0]_a
LIEKETSENG
LUMENTO X4 / X3 / X2 V2
Lumento Xn v2 e etsa tharollo ea Zennio bakeng sa taolo ea leseli ho constant-voltage DC LED luminaires.
Tokomane ena e hlalosa liphetolelo tsa eona tse tharo, e le phapang pakeng tsa tsona palo ea dikanale tlhahiso fumaneha: Lumento X4 v2 (4 dikanale), Lumento X3 (3 dikanale) le Lumento X2 v2 (2 dikanale).
Kaofela li fana ka mefuta e mengata e fapaneng ea mesebetsi:
- Liteishene tse hlahisoang li ka sebelisoa bakeng sa meralo e fapaneng ea tlhahiso, ho latela mofuta oa module oa LED le palo ea liphetho tse fumanehang:
- Likanale tsa motho ka mong: li lumella taolo e ikemetseng le e bapileng holim'a likanale tse fapaneng tsa tlhahiso.
- RGBW (ho Lumento X4 v2 feela): e lumella taolo e kopaneng holim'a mojule o le mong oa mebala e mene oa LED. Mocha o hlahisoang o tla thehoa ke likarolo tsa mebala (R, G, B le W) tsa mojule o le mong, kaofela ha tsona li laoloa ka kopanelo empa li na le maemo a khanyang a fapaneng.
- RGB + W / RGB (feela ho Lumento X4 v2 le Lumento X3 v2 ka ho latellana): e lumella ho laola mochine oa mebala oa LED oa mebala e meraro, ho feta moo, ho Lumento X4 v2 ho na le mocha o ikemetseng o mosoeu (ke hore, mocha oa RGB hammoho le mocha o le mong bakeng sa khokahanyo ea mojule o mosoeu oa LED).
- Tunable White: e lumella ho laola liteishene tsa taolo bakeng sa mocheso oa 'mala o mosoeu.
- Taolo e bobebe e nang le meeli ea dimming eo u ka e khethang le linako.
- Liketsahalo le tatellano
- Liketso tse nakong: li-timers tse bonolo, tatellano e khanyang le ho tima ka mokhoa o itekanetseng.
- Litaolo tse tloahelehileng tsa On/Off.
- Ho fumana phoso le tsebiso
- Phepelo ea Matla
- Taolo ea lebone e hloahloa bakeng sa taolo e bonolo, e kantle ho lebokose la sete ea mabone (kapa lisebelisoa tse ts'oanang tse sebetsang) e 'ngoe ea tsona e sebetsang e le kakaretso l.amp le tse ling e le tsa bobeli lamps.
- Ts'ebetso ea letsoho / tlhokomelo ea likanale tsa tlhahiso.
- Customisable, multi-operation logic mesebetsi.
- Ho otla ha pelo kapa tsebiso ea nako le nako "e ntse e phela".
- Tšireletso ea KNX.
TIISETSO
KAKARETSO
Kamora ho kenya database e tsamaellanang ho ETS le ho eketsa sesebelisoa ho topology ea projeke e lakatsehang, tlhophiso e qala ka ho kenya tab ea Parameters ea sesebelisoa.
ETS PARAMETERISATION
Sefate sa li-tab se ka letsohong le letšehali se bonts'a tabo ea "Kakaretso" sebakeng sa pele, e nang le liparamente tse latelang.
- LED Dimming [e nolofalitsoe]1: e sebetsa kamehla; li-parameter tse amanang le tsona li teng tabeng ea "LED Dimming" (sheba karolo ea 2.2).
- Leseli la Master [le holofalitsoeng / le nolofalitsoeng]: le nolofalletsa kapa le tima "Master Light" ho menu e ka letsohong le letšehali (sheba karolo ea 2.3).
- Taolo ea Manual [e holofalitsoeng / e nolofalitsoeng]: e nolofalletsa kapa e tima "taolo ea letsoho" ho menu e ka letsohong le letšehali (sheba karolo ea 2.4).
- Mesebetsi ea kelello [e holofalitsoe/e nolofalitsoe]: e nolofalletsa kapa e tima "Logic Functions" ho menu e ka letsohong le letšehali (sheba karolo ea 2.5)
- Ho otla ha pelo (Tsebiso ea Nako le nako) [e holofalitsoe/e nolofalitsoe]: paramethara ena e lumella sehokahanyi ho kenyelletsa ntho e le 'ngoe morerong (“[Heartbeat] Object to Romela '1'”) e tla romelloa nako le nako ka boleng "1" ho tsebisa hore sesebelisoa se ntse se sebetsa (se ntse se phela).
Hlokomela: Ho romelloa ha pele ka mor'a ho khoasolla kapa ho hloleha ha bese ho etsahala ka ho lieha ho fihla ho metsotsoana e 255, ho thibela ho tlala ha libese. Lithomello tse latelang li tsamaisana le nako e behiloeng. - Lintho tsa ho Fumana Sesebelisoa (Romela 0 le 1) [e holofalitsoe / e nolofalitsoe]: paramethara ena e kenya tšebetsong lintho tse peli tse ncha tsa puisano ("[Heartbeat] Device Recovery"), e tla romelloa beseng ea KNX ka boleng "0" le "1" ka ho latellana. neng kapa neng ha sesebelisoa se qala ho sebetsa (mohlalaample, ka mor'a ho tima beseng ea motlakase). Hoa khonahala ho lekanya tieho e itseng [0…255] ho romella hona.
Hlokomela: ka mor'a ho hloleha kapa ho hloleha ha bese, ho romela ho etsahala ka ho lieha ho fihla ho metsotsoana ea 6,35 hammoho le tieho e behiloeng, ho thibela ho tlala ha libese. - Lits'oants'o kamora ho Khoasolla [E hlophisitsoe ke Liparamente / Boloka Lits'oants'o Tse Bolokiloeng]: e lumella ho hlalosa hore na boleng ba liketsahalo bo hlophisitsoe ke paramethara kapa hore na boleng bo bolokiloeng pele bo bolokoa kamora ho jarolla.
Hlokomela: haeba khetho ea "Boloka Lits'oants'o Tse Bolokiloeng" e hlophisitsoe, empa ke download ea pele ea sesebelisoa kapa mofuta o fapaneng le oa hajoale, litekanyetso tse hlophisitsoeng ke li-parameter li tla amoheloa. Haeba lits'oants'o tse ncha li eketsoa ka ho jarolla ka ho latellana, ho tla hlokahala ho jarolla ka ho sheba khetho ea "Configured by Parameters" ho netefatsa ts'ebetso e nepahetseng ea liketsahalo tsena. - Tlhophiso e tsoetseng pele [e holofalitsoe / e nolofalitsoe]: e nolofalletsa kapa e tima "Tlhahiso e Tsoetseng Pele" ho menu e ka letsohong le letšehali (sheba karolo ea 2.1.1).
RETS'ELISITSOE TIISETSO
- Nako ea ho Qala ea Phepelo ea Matla [4…255] [ds]: e lumella parameterising nako ea ho leta hore e sebelisoe ho tloha nakong eo phepelo ea motlakase e koalang ho fihlela likanale li buloa.
LIPHOSO
Lumento e khona ho lemoha liphoso tse itseng tse ka 'nang tsa etsahala nakong ea ts'ebetso e tloaelehileng, e tla bontšoa ka lintho tsa puisano le tatellano ea mabone ea li-LED tsa sesebelisoa. Re lokela ho hlokomela hore Lumento ha e tlalehe liphoso tse ling tse ka khonehang ho fihlela e thibela kapa e tiisa hore ke ho hloka matla a ka ntle.
- PHOOFOLO
Phoso ena e kentsoe tšebetsong haeba NTC efe kapa efe e hlahloba hore sesebelisoa se fihletse mocheso o ka bang kotsi.
Thempereichara e lekanngoa ka phuputso e 'ngoe le e 'ngoe ka 100ms 'me ho etsoa khato e lumellanang le eona haeba boleng ba mocheso bo le ka har'a mekhahlelo ena:- Sebaka sa thibelo (110ºC <T <115ºC): ha 110ºC e fetisitsoe, boemo ba mabone a meroalo bo fokotsehile ho 30% haeba bo le boemong bo phahameng. Litekanyetso tse amoheloang ke bese nakong ea mokhoa ona li boetse li lekanyelitsoe ho khanya e phahameng ea 30%.
- Sebaka sa ho khaola (T> 115ºC): ha mocheso ona o feta, joale ha e sa fanoa ho lihlahisoa.
Lumento ha e khutlele boemong ba eona bo tloaelehileng ho fihlela mocheso o le ka tlase ho 105ºC.
Ha boemo ba phoso ea ho chesa haholo bo qala, liketso tse 'maloa li etsoa: - Romela '1' ka ntho ea puisano "Error: overheating".
- Tima LED ea MATLA.
- Ho khanya ha phoso ea LED bakeng sa makhetlo a 2 a latellanang metsotsoana e meng le e meng ea 6 (Ton = Toff = 0.5s). Sheba Lethathamo la 1 bakeng sa lintlha tse ling.
Ha u tloha sebakeng sa phoso, ho benya ha LED hoa emisa. Ho feta moo, POWER LED e khantša 'me '0' e romeloa ke ntho e boletsoeng.
Lintlha tse ling tsa bohlokoa: - Ha phoso ea ho chesa haholo e fela, likanale li lula li le maemong a taolo ao li leng ho ona ka nako eo, boemo bo fetang 30% ha bo fumanehe le haeba mocha o itseng o ne o e-na le eona pele phoso e etsahala.
- Leha boemo ba mocheso o feteletseng o ntse o sebetsa, Mokhoa oa Test On o ke ke oa sebelisoa. Tabeng ea ho ba mafolofolo ha overheating e lemoha, e tla tsoa ka mokhoa o itseng.
- PUSELETSO MATLA A Kantle
Phoso ena e kentsoe tšebetsong maemong a latelang:- Ha ho matla a kantle a hokahaneng.
- Matla a kantle a khutlisetsoa morao.
- Motlakase oa kantle o na le voltage kholo ho feta 40V.
Ha u kenya boemo bona ba phoso, liketso tse latelang li etsoa: - Tsebiso ka metsotsoana e meng le e meng e 30 ke ntho ea puisano "Error: external voltage”.
- Tima LED ea MATLA.
- Ho khanya ha phoso ho LED ka makhetlo a 4 a latellanang metsotsoana e meng le e meng ea 6 (Ton = Toff = 0.5s). Sheba Lethathamo la 1 bakeng sa lintlha tse ling.
- Ha u tlohela boemo ba phoso, ho benya ha phoso ea LED hoa emisa. Ho feta moo, POWER LED e khantša 'me '0' e romeloa ke ntho e boletsoeng.
Lintlha tse latelang li lokela ho boleloa: - Ha matla a ka ntle a tsosolosoa, haeba ho se na phoso e 'ngoe e thibelang li-LED ho khantša, boleng ba sepheo pele ho ho senyeha ha matla bo tsosolosoa. Tabeng ea kantle voltage ho hlaphoheloa nakong ea ho hloleha ha bese, litekanyetso tse lokiselitsoeng ho qala tloaelo lia sebetsa.
Le ha phoso ena e le teng ha ho khonehe ho kenya mokhoa oa Test On. Haeba e sebetsa ha mathata a matla a kantle a fumanoa, mokhoa ona oa tloheloa.
- TS'ELISITSOE
Hang ha phoso ea phepelo ea motlakase e se e qheletsoe ka thoko, Lumento e fumana hore na ho na le phoso e khuts'oane ho phallo e itseng kapa tšibollo ea "shortcircuit" e fosahetseng ka mokhoa o latelang:- Ha phoso ea mofuta ona e fumanoa ka lekhetlo la pele, liphetho tsohle lia tima hang-hang. Ho phaella moo, ntho ea puisano "Ho batla phoso ea shortcircuit" e tla romela ka boleng ba '1' 'me POWER LED e tima.
- Hang ha liphetho li felile, ho ema metsotsoana ea 5 ho tla qobelloa ho senya mocheso o feteletseng. Nakong ena, liketso tsohle tse ka khonehang ho liphetho li hlokomolohuoa ka ho feletseng (litaelo tse tsoang ho lintho kapa ka ho tobetsa konopo TEST) hammoho le konopo ea lenaneo.
- Hang ha nako ea ho pholisa e fetile, mokhoa oa ho lemoha li-shortcircuit o qala ka ho hlahloba lihlahisoa tsohle tsa mochine. Sekena sena se kenyelletsa ho bulela tlhahiso e le 'ngoe nako le nako ka nako e lekanyelitsoeng (~ 300ms).
Haeba ho fumanoa shortcircuit nakong ea scan, ho etsahala se latelang:- Sephetho se bakileng phoso se timiloe.
- '0' e romelloa ke "Searching for shortcircuit error".
- '1' e romelloa ka "[] Phoso: Shortcircuit" ntho e amanang le tlhahiso e bakileng phoso.
- Matla a LED a bulela.
- Phoso e etellang pele e qala ho benya. Sena se lebisitse ho khanya ha 1 metsotsoana e meng le e meng e 6. Sheba Lethathamo la 1 bakeng sa lintlha tse ling.
Hang ha shortcircuit e se e rarollotsoe, Lumento e siea boemo bona ba phoso haeba e fumana taelo leha e le efe ea ho tima / ho tima kapa ea ho fifala e bakoang ke ho amohela ntho ea puisano kapa ka ho tobetsa konopo ea TEST. Ha u tlohela boemo ba phoso, '0' e romelloa ke “[ ] Error: Shortcircuit "ntho e amanang le ho benya".
Haeba ho sa lemohuoe shortcircuit nakong ea skena, Lumento e khutlela ho boleng ba sepheo pele e lemoha phoso ebe e romela '0' ka ntho ea "Batla phoso ea shortcircuit".
Haeba phoso e ne e sa lokisoa 'me ea etsahala hape hang hang, ts'ebetso eohle ea ho lemoha le ho tsebisoa e ne e tla qala hape.
Lintlha tse ling tsa bohlokoa:
- Haeba phoso e etsahala ha o le maemong a Test On, Lumento oa tsoa hang-hang.
- Ho fapana le liphoso tse ling, mokhoa oa Test On o ka kenngoa ha phoso ena e ntse e sebetsa.
- Boitsebiso le tsebiso ea phoso ena e etsahala feela ha boemo ba taolo bo fapane le 0%.
Ho na le maemo ao boemo ba taolo bo leng tlaase hoo ho seng phoso e khutšoanyane e fumanoang (kapa e hlahisoang). Sena se itšetlehile ka lintlha tse ka ntle tse kang ho hanyetsa ka ho feletseng ha lesela la LED, le sa fetoheng feela ho latela bolelele ba lona empa le ka mocheso.
- TSEBISO PHOSO
Ho lemoha liphoso, hammoho le tsebiso ea eona ka li-LED tse lumellanang, e lula e sebetsa, kahoo haeba phoso e le 'ngoe kapa tse ling tse bontšitsoeng li etsahala, e tla tlalehoa ka pono.
Bakeng sa tsebiso ka ntho ea puisano, parameter ea Error objects e tlameha ho lumelloa.
Lethathamo la 1. Tsebiso e bonoang ha ho ka fumanoa phoso.
Haeba ho na le liphoso tse fetang bonngoe ka nako e le 'ngoe, ho tla tsebisoa feela ea nang le boemo bo phahameng ka ho fetisisa. Haeba ena e nyamela ha e 'ngoe ea maemo a tlase e ntse e sebetsa, ea morao e tla tsebisoa ka pono. Tlhokomelo ea liphoso ho tloha holimo ho ea tlase ke tse latelang:
- Ho hloleha ha phepelo ea motlakase kantle.
- Shortcircuit.
- Ho chesa haholo.
LESOA TŠOANELO
Ts'ebetso ea mantlha ea Lumento Xn v2 e kenyelletsa ho laola mabone a LED, ao ho ipapisitsoeng le palo ea liphetho tse fumanehang, ho na le tlhophiso e fapaneng e ka khonehang ho latela likhoele tsa LED tse hokahaneng.
Bakeng sa Lumento X4 v2 litlhophiso tse fapaneng tse fumanehang ke:
- [Mecha ea motho ka mong]
- [4x Motho ka mong]
- [Channel 1+2+3+4 (Parallel)]
- [Channel 1+2+3 (Parallel); Channel 4 (Indep.)]
- [Channel 1+2 (Parallel); Channel 3 le 4 (Indep.)]
- [Channel 1+2 (E Bapileng); Channel 3+4 (Parallel)]
- [RGBW]
- [RGB+W]
- [Tunable White]
- [2x TW]
- [TW 1+2 (Parallel)]
- [TW 1; Channel 3 le 4 (Indep.)]
- [TW 1; Channel 3+4 (Parallel)]
Bakeng sa Lumento X3 v2 litlhophiso tse fumanehang ke:
- [Mecha ea motho ka mong]
- [3x Motho ka mong]
- [Channel 1+2+3 (E bapaneng)]
- [Channel 1+2 (E Bapileng); Channel 3 (Indep.)]
- [RGB]
- [Tunable White]: Channel TW1 le Channel C3 (e ikemetseng).
Bakeng sa Lumento X2 v2 litlhophiso tse fumanehang ke:
- [Mecha ea motho ka mong]
- [2x Motho ka mong]
- [Channel 1+2 (E Bapileng)]
- [Tunable White]
Ka kopo, sheba bukana ea mosebelisi ea "LED Dimming Control", e fumanehang tlasa karolo ea sehlahisoa sa Lumento DX4 v2 ho www.zennio.com bakeng sa tlhaiso-leseling e batsi mabapi le ts'ebeliso ea Taolo ea Dimming ea LED le parameterisation ea eona ho ETS.
MOHLANKA LESENYA
Lumento e na le ts'ebetso ea Master Light, e tlisang khetho ea ho lekola boemo ba mehloli ea leseli e fihlang ho 12 (kapa ho feta moo, haeba taolo ea Leseli la Master ho tsoa lisebelisoa tse ngata tsa Zennio li hokahantsoe hammoho) kapa ea likarolo life kapa life tseo boemo ba tsona bo fetisoang ka ntho ea binary 'me, ho itšetlehile ka linaha tseo, etsa taelo e kholo nako le nako ha pontšo e itseng ea trigger (hape, boleng ba binary) e amoheloa ka ntho e itseng.
Tsamaiso e joalo e tla kenyelletsa:
- Taelo ea ho tima ka kakaretso, haeba bonyane ntho e le 'ngoe ho tse leshome le metso e' meli ea boemo e fumanoa e le teng.
- Taelo ea ho bulela ka tlhompho, haeba ho se le e 'ngoe ea lintho tse fihlang ho tse leshome le metso e 'meli e fumanoang e le teng.
Hlokomela hore litaelo tse ka holimo tsa ho tima le ho bulela ha se hakaalo hore ke boleng ba binary bo romelloang beseng - ho ho motho ea kopanyang qeto ea hore na o tla romela eng ho bese ea KNX maemong ana ka bobeli: shutter order, thermostat. setpoint or mode switch order, boleng bo sa feleng, ketsahalo… Ke ntho feela e tsosang takatso le lintho tse leshome le metso e 'meli tsa boemo tse hlokahalang ho ba binary (ho buloa/ho tima).
Boemo bo tloaelehileng haholo bakeng sa taolo ena ea Master Light e ka ba phaposi ea hotele e nang le konopo ea master haufi le lemati. Ha a tsoa ka phapusing, moeti o tla ba le monyetla oa ho tobetsa konopo ea master ebe o etsa tsohle lamps tima hammoho. Ka mor'a moo, khutlela ka kamoreng le ka l tsohleamps tima, ho tobetsa konopo e tšoanang ea master ho tla etsa feela l e itsengamp bulela (mohlala, e haufi haholo lamp ho ea monyako) - ena ke sesebelisoa sa tlhompho.
Ntle ho moo, hoa khoneha ho kopanya li-module tse peli kapa ho feta tsa Master Light ka ntho e itseng ea puisano e emelang boemo bo akaretsang ba mehloli ea leseli ea module ka 'ngoe. Ka hona, hoa khoneha ho atolosa palo ea mehloli ea leseli ka ho nahana ka boemo bo akaretsang ba module e le 'ngoe e le mohloli o eketsehileng oa leseli bakeng sa o mong.
ETS PARAMETERISATION
Hang ha mosebetsi oa Master Light o se o nolofalitsoe, tab e itseng e tla kenyelletsoa ho menu e ka letsohong le letšehali. Skrine ena e ncha ea parameter e na le likhetho tse latelang:
- Palo ea Lintho tsa Naha [1…12]: e hlalosa palo ea lintho tse hlokahalang tsa boemo ba 1-bit. Lintho tsena li bitsoa "[ML] Status Object n."
Ho feta moo, ntho ea boemo ba kakaretso ("[ML] Boemo bo akaretsang") e tla lula e le teng ho topology ea morero. E tla romelloa beseng ka boleng ba "1" neng kapa neng ha bonyane ho na le e 'ngoe ea lintho tse boletsoeng ka holimo tse nang le boleng bo joalo.
Ho seng joalo (ke hore, haeba ho se le e 'ngoe ea tsona e nang le boleng ba "1"), e tla romelloa ka boleng ba "0". - Trigger Value [0 / 1 / 0/1]: e beha boleng bo tlang ho qala, ha e amoheloa ka "[ML] Trigger", ketso e kholo (ho tima ka kakaretso kapa ho bulela courtesy).
- Phetoho e Tloaelehileng:
- Ho lieha [0…255] [x 1 s]: e hlalosa tieho e itseng (hang ha seqhomane se amohetsoe) pele ho ts'ebetso ea ho tima ka kakaretso. Sebaka se lumelletsoeng ke metsotsoana e 0 ho isa ho 255.
- Binary Value [e holofalitsoe/e nolofalitsoe]: haeba e khethiloe, ntho “[ML] General Switch-off: Binary Object” e tla lumelloa, e leng eona e tla romela e le 'ngoe “0” neng le neng ha ho tima ka kakaretso ho tima.
- Scaling [e holofalitsoe/e nolofalitsoe]: haeba e khethiloe, ntho “[ML] General Switch-off: Scaling” e tla lumelloa, e tla romela liperesentetage value (e ka hlophisoang ho Boleng [0…100]) neng kapa neng ha ho tima ka kakaretso ho tima.
- Scene [e holofalitsoe / e nolofalitsoe]: haeba e khethiloe, "ntho [ML] Kakaretso ea Switch-off: Scene" e tla nolofalloa, e tla romella ketsahalo / boloka odara (e ka lokisoang ka Action [Run / Save] le Scene Number [1 ... 64]) neng kapa neng ha ho tima ka kakaretso ho tima
- HVAC [e holofalitsoe / e nolofalitsoe]: haeba e khethiloe, ntho "[ML] Kakaretso ea Switch-off: HVAC mode" e tla lumelloa, e tla romela boleng ba mokhoa oa thermostat oa HVAC (e ka lokisoang ka Boleng [Auto / Comfort / Standby / Economy / Building Protection ) neng kapa neng ha ho tima ka kakaretso.
Hlokomela: likhetho tse ka holimo ha li khetholle; hoa khoneha ho romela litekanyetso tsa tlhaho tse fapaneng hammoho.
- Ka tlhompho Switch-On:
Mekhahlelo e teng mona e tšoana ka botlalo le e seng e boletsoe bakeng sa General Switch-Off. Leha ho le joalo, tabeng ena mabitso a lintho a qala ka "[ML] Courtesy Switch-On (...)." Ka lehlakoreng le leng, ho romela li-scene ho boloka litaelo ha ho khonehe bakeng sa ho bulela ka tlhompho (ke litaelo feela tsa ho bapala lipapali tse lumelloang).
Hlokomela: ntho "[ML] Courtesy Switch-On: Binary Object" e romela boleng "1" (ha ho khannoa ha tlhompho ho etsahala), ho fapana le ntho "[ML] General Switch-Off: Binary Object", e romelang boleng "0" (nakong ea ho tima ka kakaretso, joalokaha ho hlalositsoe ka holimo).
TAOLI MOLAOLI
Tafoleng e latelang e thathamisa likarolo tsohle tse karolong e ka pele ea sesebelisoa:
Lethathamo la 2. Lintho tse ka pele tsa phanele.
| Element | Tlhaloso | Sekhetho |
| KONopo ea Teko | Ho bulela/tima le diphetho di a fifala | TEKO |
| Phoso ea LED | E tlaleha liphoso ka tatellano e fapaneng ea mabone | PHOSO |
| Boemo ba Matla a kantle a LED | Matla a kantle ntle le phoso (O butswe) kapa ka phoso (O tima) | MATLA |
Lumento e lumella ho fetola boemo ba liteishene tsa eona ka konopo ea TEST ka lehlakoreng le ka holimo la sesebelisoa.
Ts'ebetso ea letsoho e ka etsoa ka mekhoa e 'meli e fapaneng, e bitsoang Test On mode (bakeng sa liteko nakong ea ho hlophisoa ha sesebelisoa) le mokhoa oa Test Off (bakeng sa ts'ebeliso e tloaelehileng, neng kapa neng). Hore na ka bobeli, e le 'ngoe feela, kapa ha ho le e' ngoe ea mekhoa ena e lokelang ho fihlelleha, e tlameha ho behelloa ka thoko ho ETS. Ho feta moo, hoa khoneha ho nolofalletsa ntho e itseng ea binary bakeng sa ho notlela le ho notlolla taolo ea tataiso nakong ea nako.
Lintlha:
- Mokhoa oa Test Off o tla sebetsa (ntle le haeba o holofalitsoe ka mekhahlelo) ka mor'a ho kopitsa kapa ho tsosolosa ho sa hlokahale hore ho be le ts'ebetso e itseng - konopo e tla arabela likhatisong tsa basebelisi ho tloha qalong.
- Ho fapana le hoo, ho fetohela ho Test On mode (ntle le haeba e holofetse ka har'a li-parameter) e hloka ho etsoa ka ho tobetsa konopo ea Prog./Test nako e telele (bonyane metsotsoana e meraro), ho fihlela LED e se e le khubelu 'me e fetoha mosehla. Ho tloha ka nako eo, hang ha konopo e lokolloa, lebone la LED le tla lula le le letala ho netefatsa hore sesebelisoa se fetohile ho tloha ho Test Off mode ho ea ho Test On mode. Ka mor'a moo, mochine o mong oa khatiso o tla fetola LED mosehla ebe oa tima, hang ha konopo e lokolloa. Ka tsela ena, sesebelisoa se tlohela mokhoa oa Test On. Hlokomela hore e tla boela e tlohele mokhoa ona haeba motlakase oa bese o senyeha.
- Ha liphetho tse 'maloa li behiloe ka mokhoa o ts'oanang, boemo ba tsona bo fetoloa ka nako e le' ngoe e le mocha o le mong o hlophisitsoeng.
Teko Off
Tlas'a Test Off Mode, liteishene li ka laoloa ka lintho tsa bona tsa puisano le konopo e kaholimo ho sesebelisoa.
Ha konopo ea TEST e hatelloa, mocha o lumellanang o tla itšoara joalokaha eka taelo e amohetsoe ka ntho e tšoanang ea puisano.
Mechini e khuts'oane ea khatiso e tla bulela likanale tse fapaneng tse fumanehang ka ho latellana (1, 2, 3, 4, OFF, 1…). Lenaneo leo ho buuoang ka lona le tla buloa 'me likanale tse ling li lule li tiiloe. Mochine o mokhutšoane o latelang o tla tima ona ebe o tima o latelang, joalo-joalo. K'hamera ea seteishene seo ho lokelang ho sebetsa ho sona e eketsoa feela ha ho sebetsa konopo ea TEST, taelo efe kapa efe e rometsoeng ke ntho likanaleng ha e ame boemo ba hajoale.
- Likhatiso tse telele li laola tlhahiso ea ho qetela e sebelisoang ka mochine o mokhutšoanyane oa khatiso. Haeba boemo ba tlhahiso bo lekana le boholo, Lumento e tla qala molao o theohelang, ho seng joalo, e tla qala molao o holimo. Haeba konopo e lokolloa 'me e hatelloa hape, tataiso ea taolo e tla fetoloa,' me ha meeli ea moeli e fihletsoe, molao o tla emisa ka boomo.
Nako ea taolo e tla ba eona e behiloeng bakeng sa taolo e lekanyelitsoeng.
Hlokomela: Meeli ea ho fifala le ea switjha e tla ipapisa le parameterisation (mokhoa oa moruo, sebopeho sa curve, joalo-joalo).
Mabapi le mesebetsi e meng kaofela, sesebelisoa se tla itšoara tlas'a mokhoa oa Test Off ka mokhoa o tloaelehileng. Joalokaha ho boletsoe, ho tobetsa likonopo nakong ea mokhoa ona ho tšoana hantle le ho amoheloa ha litaelo tse tsamaellanang tse tsoang beseng ea KNX, ka hona, lintho tsa boemo le tsona li tla romelloa ka tloaelo.
Test On
Ka mor'a ho kenya mokhoa oa Test On, ho tla khonahala feela ho laola liteishene tsa tlhahiso ka konopo ea on-board manual control.
Ho nolofalletsa mokhoa oa Test On ho lumella taolo e tobileng ea mocha o mong le o mong ka boikemelo ba parameterisation ea sesebelisoa - liteishene tse hlahisoang li ka laoloa ka mokhoa oa Test On ho sa tsotelehe hore na ha lia ka tsa lumelloa ka liparamente:
Seteishene se fifalang ka konopo ea TEST se tla tšoana le se maemong a Test Off, ka lintlha tse latelang:
- Khatiso e khuts'oane: e tla etsa hore melaoana e potlakileng ho 0% kapa ho 100%.
- Tobetsa e telele: nako ea ho fifala e tla ba metsotsoana e 10 ho tloha ho 0% ho isa ho 100%.
- Ha u kenya Test On, boemo ba khaontara ea kanale eo ho etsoang tšebetso ho eona boa bolokoa, 'me e tla qaloa bocha e le ho qala mocha oa 1. Ha u tsoa ho Test On, boleng ba pele bo fumanoa.
- Litaelo tse fumanoang ka lintho tsa puisano li tla hlokomolohuoa. Ho feta moo, sesebelisoa se ke ke sa romela lintho leha e le life tsa boemo bo lumellanang le liketso tsa matsoho tse etsoang ke mosebedisi. Ntho e le 'ngoe feela ke lintho tse thibelang, tse tla tsotelloa ha u tloha Test On Mode.
- Haeba matla a ka ntle a hloleha kapa sekhechana se khuts'oane, Lumento e tla tsoa ka bo eona mokhoa oa Test On.
Mokhoa oa Test On o ke ke oa fumaneha nakong ea:
- Phoso ea matla a kantle.
- Phoso ea mocheso o feteletseng.
- The shortcircuit search analysis.
Bohlokoa: sesebelisoa se fanoa ho tloha fekthering ka mekhoa ea matsoho ka bobeli (Test Off le Test On) e nolofalitsoe, le hoja liteishene tsohle li holofetse (ka hona, mokhoa oa Test Off o tla fella ka ho se sebetse).
ETS PARAMETERISATION
Ka mor'a ho lumella "Manual Control" (e nolofalitsoeng ke kamehla) skrineng se akaretsang, tab e ncha e tla kenngoa sefateng se ka letsohong le letšehali.
Taba ena e na le li-parameter tse latelang:
- Taolo ea Manual [Tlhahiso ea Bokooa / Mokhoa oa Teko Feela", "Tlhahlobo feela ka Mokhoa / Mokhoa oa Teko + Mokhoa oa Teko): ho latela khetho, sesebelisoa se tla lumella ho sebelisa taolo ea tataiso tlasa Test Off, Test On, kapa ka bobeli. mekhoa. Hlokomela hore, joalo ka ha ho boletsoe pejana, ho sebelisa mokhoa oa Test Off ha ho hloke ketso leha e le efe e khethehileng, ha ho fetohela ho Test On mode ho hloka hore u tobetse nako e telele konopo ea Prog./Test.
- Manual Control Lock [E holofetse / E nolofalitsoe]: ntle le haeba paramethara e kaholimo e holofalitsoe, paramethara ea Lock Manual Control e fana ka mokhoa oa boikhethelo oa ho notlela taolo ea tataiso nakong ea ho sebetsa. Ha lebokose lena la ho hlahloba le bulehile, ntho ea "Manual Control Lock" e tla bonahala, hammoho le liparamente tse ling tse peli:
- Boleng [0 = Notlolla; 1 = Notlela / 0 = Notlela; 1 = Notlolla]: e hlalosa hore na senotlolo / notlollo ea taolo ea letsoho e lokela ho etsahala ka tatellano ha ho amoheloa boleng ba "0" le "1", kapa ho fapana.
- Ho qala [Ho notletsoe / ho notletsoe / Boleng ba ho Qetela (Pele ho Phoso ea Kose)]: e beha hore na boemo ba senotlolo sa taolo ea bukana bo lokela ho sala joang kamora ho qala sesebelisoa (kamora ho jarolla ETS kapa ho hloleha ha motlakase oa bese).
LIEKETSENG MANTSOE
Mojule ona o etsa hore ho khonehe ho etsa lits'ebetso tsa linomoro le tsa binary ho litekanyetso tse kenang tse amoheloang ho tsoa beseng ea KNX, le ho romella liphetho ka lintho tse ling tsa puisano tse etselitsoeng morero ona ka ho khetheha.
Ho ka etsoa mesebetsi e ka bang 10 e fapaneng le e ikemetseng, 'me e' ngoe le e 'ngoe ea tsona e ka etsoa ka mokhoa o ikhethileng, e nang le ts'ebetso e fihlang ho tse 4 tse latellanang.
Ts'ebetso ea ts'ebetso e 'ngoe le e' ngoe e ka its'etleha ho boemo bo ka lokisoang, bo tla hlahlojoa nako le nako ha ts'ebetso e hlahisoa ka lintho tse ikhethileng, tse ka khonehang tsa puisano. Sephetho ka mor'a ho phethahatsa ts'ebetso ea ts'ebetso e ka boela ea hlahlojoa ho latela maemo a itseng 'me ka mor'a moo ea romeloa (kapa che) ho bese ea KNX, e ka etsoang nako le nako ha mosebetsi o etsoa, nako le nako kapa feela ha sephetho se fapane le sa ho qetela. ngoe.
Ka kopo sheba buka ea mosebelisi ea "Logic Functions", e fumanehang ka har'a karolo ea sehlahisoa ea Lumento X4 / X3 / X2 v2 leqepheng la Zennio, www.zennio.com, bakeng sa lintlha tse qaqileng mabapi le ts'ebetso le tlhophiso ea li-parameter tse amanang.
TS'ELISO NTHO
- "Lethathamo la ts'ebetso" le bonts'a litekanyetso tseo, ntle le boikemelo ba boleng bofe kapa bofe bo lumelletsoeng ke bese ho latela boholo ba ntho, e ka ba ea tšebeliso efe kapa efe kapa e na le moelelo o itseng ka lebaka la litlhaloso kapa lithibelo tse tsoang ho maemo a KNX kapa lenaneo la kopo. ka boyona.
Hlokomela: Lintho tsa Lumento X4 v2 lia bontšoa, lintho tse ling ha li sebetse ho mefuta e meng
| Nomoro | Boholo | I/O | Lifolakha | Mofuta oa data (DPT) | Range e sebetsang | Lebitso | Mosebetsi |
| 1 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Notlela Manual Control | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | Notlela Manual Control | 0 = Notlela; 1 = Notlolla | |
| 2 | 3 Byte | I | C - WTU | DPT_TimeOfDay | 00:00:00 – 23:59:59 | [Kakaretso] Nako ea Letsatsi | Nako ea Letsatsi Reference External |
| 3 | 3 Byte | I | C - WTU | DPT_Letsatsi | 01/01/1990 -
31/12/2089 |
[Kakaretso] Letsatsi | Letsatsi Reference External |
| 4 | 1 Bit | C – – T – | DPT_Trigger | 0/1 | [Ho otla ha pelo] Object to Romela '1' | Ho romelloa ha '1' Nako le nako | |
| 5 | 1 Bit | C – – T – | DPT_Trigger | 0/1 | [Ho otla ha pelo] Khutlisa sesebelisoa | Romella 0 | |
| 6 | 1 Bit | C – – T – | DPT_Trigger | 0/1 | [Ho otla ha pelo] Khutlisa sesebelisoa | Romella 1 | |
|
7 |
1 Bit | I | C - W - - | DPT_Trigger | 0/1 | [MLx] Hlahisa | Hlahisa Mosebetsi oa Leseli la Master |
| 1 Bit | I | C - W - - | DPT_Ack | 0/1 | [MLx] Hlahisa | 0 = Ha ho letho; 1 = Qala ho
Mosebetsi oa Leseli la Master |
|
| 1 Bit | I | C - W - - | DPT_Ack | 0/1 | [MLx] Hlahisa | 1 = Ha ho letho; 0 = Hlahisa Mosebetsi oa Leseli la Master | |
| 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [MLx] Boemo ba Boemo x | Boemo ba binary |
| 20 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [MLx] Boemo ba Kakaretso | Boemo ba binary |
| 21 | 1 Bit | C – – T – | DPT_Switch | 0/1 | [MLx] Kakaretso Switch Off: Binary Object | Tlosa ho Romela | |
| 22 | 1 Byte | C – – T – | DPT_Scaling | 0% - 100% | [MLx] Phetoho e Akaretsang: Ho eketsa | 0-100% | |
| 23 | 1 Byte | C – – T – | DPT_SceneControl | 0-63; 128-191 | [MLx] Phetoho e Akaretsang: Sebaka | Sebaka sa ho Romela | |
| 24 | 1 Byte | C – – T – | Tsela ea DPT_HVACMode | 1=Matšeliso 2=Matšeliso | [MLx] Phetoho e Akaretsang: Mokhoa oa HVAC | Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho |
| 3=Moruo
4=Tshireletso |
|||||||
| 25 | 1 Bit | C – – T – | DPT_Switch | 0/1 | [MLx] Courtesy Switch On: Binary Object | Fetola ho Romela | |
| 26 | 1 Byte | C – – T – | DPT_Scaling | 0% - 100% | [MLx] Ka tlhompho Switch On:
Katoloso |
0-100% | |
| 27 | 1 Byte | C – – T – | DPT_SceneNomoro | 0 - 63 | [MLx] Ka tlhompho Switch On: Scene | Sebaka sa ho Romela | |
|
28 |
1 Byte |
C – – T – |
Tsela ea DPT_HVACMode |
1=Confort 2=E eme 3=Económico
4=Tshireletso |
[MLx] Ka tlhompho Ho Bula: Mokhoa oa HVAC |
Auto, Comfort, Standby, Moruo, Tšireletso ea Moaho |
|
| 29, 30, 31, 32, 33,
34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60 |
1 Bit |
I |
C - W - - |
DPT_Bool |
0/1 |
[LF] (1-Bit) Keno ea Lintlha x |
Binary Data Kenya (0/1) |
| 61, 62, 63, 64, 65,
66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76 |
1 Byte |
I |
C - W - - |
DPT_Value_1_Ucount |
0 - 255 |
[LF] (1-Byte) Kenyo ea Lintlha x |
Keno ea Lintlha tsa 1-Byte (0-255) |
| 77, 78, 79, 80, 81,
82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92 |
2 Byte |
I |
C - W - - |
DPT_Value_2_Ucount |
0 - 65535 |
[LF] (2-Byte) Kenyo ea Lintlha x |
2-Byte Ho Kena ha Boitsebiso |
| 93, 94, 95, 96, 97,
98, 99, 100 |
4 Byte | I | C - W - - | DPT_Value_4_Palo | -2147483648 -
2147483647 |
[LF] (4-Byte) Kenyo ea Lintlha x | 4-Byte Ho Kena ha Boitsebiso |
|
101, 102, 103, 104, 105, 106, 107, 108, 109, 110 |
1 Bit | O | CR – T – | DPT_Bool | 0/1 | [LF] Mosebetsi x – Sephetho | (1-Bit) Boolean |
| 1 Byte | O | CR – T – | DPT_Value_1_Ucount | 0 - 255 | [LF] Mosebetsi x – Sephetho | (1-Byte) Ha ea saena | |
| 2 Byte | O | CR – T – | DPT_Value_2_Ucount | 0 - 65535 | [LF] Mosebetsi x – Sephetho | (2-Byte) Ha ea saena | |
| 4 Byte | O | CR – T – | DPT_Value_4_Palo | -2147483648 -
2147483647 |
[LF] Mosebetsi x – Sephetho | (4-Byte) E saennoe | |
| 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [LF] Mosebetsi x – Sephetho | (1-Byte) Liphesentetage | |
| 2 Byte | O | CR – T – | DPT_Value_2_Palo | -32768 - 32767 | [LF] Mosebetsi x – Sephetho | (2-Byte) E saennoe | |
| 2 Byte | O | CR – T – | 9.xxx | -671088,64 - 670433,28 | [LF] Mosebetsi x – Sephetho | (2-Byte) Phapang | |
| 111 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | Phoso: Ho chesa ho feta tekano | 0 = Ha ho Phoso; 1 = Phoso |
| 112 | 1 Bit | C – – T – | Qala | 0/1 | Ho Batla Phoso ea Shortcircuit | 0 = Emisa; 1 = Qala |
| 113 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | Phoso: Moqtage | 0 = Ha ho Phoso; 1 = Phoso |
| 114, 115, 116, 117 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [Cx] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 114 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [R] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 114, 116 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [CWx] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 115 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [G] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 115, 117 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [WWx] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 116 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [B] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 117 | 1 Bit | O | CR – T – | DPT_Alamo | 0/1 | [W] Phoso: Shortcircuit | 0 = Ha ho Phoso; 1 = Phoso |
| 118 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGB] Boemo bo phahameng ba Leseli | 20 - 100% |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGBW] Boemo bo phahameng ba Leseli | 20 - 100% | |
| 118, 149 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx] Boemo bo phahameng ba Leseli | 20 - 100% |
| 118 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx+TWx] Boemo bo phahameng ba Leseli | 20 - 100% |
| 119 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGBW] Tlosa / tima | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGB] Bula/Tima | 0 = Ho tima; 1 = Bula | |
| 119, 150 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] Tlosa / tima | 0 = Ho tima; 1 = Bula |
| 119 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] Bulela/Tima | 0 = Ho tima; 1 = Bula |
|
120 |
4 Bit | I | C - W - - | DPT_Control_Dimming | 0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[RGBW] Relative Dimming | Taolo ea 4-Bit Dimmer |
| 4 Bit | I | C - W - - | DPT_Control_Dimming | [RGB] Relative Dimming | Taolo ea 4-Bit Dimmer | ||
| 120, 151 | 4 Bit | I | C - W - - | DPT_Control_Dimming | [TWx] Relative Dimming | Taolo ea 4-Bit Dimmer | |
| 120 | 4 Bit | I | C - W - - | DPT_Control_Dimming | [TWx+TWx] Relative Dimming | Taolo ea 4-Bit Dimmer | |
| 121 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGBW] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGB] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte | |
| 121, 152 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 121 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx+TWx] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 122, 123, 124 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [RGBW] Nako ea ho Finyella x | Nako ka Metsotsoana |
| 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [RGB] Nako ea ho Finyella x | Nako ka Metsotsoana | |
| 122, 123, 124, 153,
154, 155 |
2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [TWx] Nako ea ho Finyella x | Nako ka Metsotsoana |
| 122, 123, 124 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [TWx+TWx] Nako ea ho Finyella x | Nako ka Metsotsoana |
| 125 | 3 Byte | I | C - W - - | DPT_Mmala_RGB | [0 – 255] * 3 | [RGB] Mobala oa RGB | Taolo ea RGB ea 3-Byte |
| 125, 156 | 2 Byte | I | C - W - - | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx] Mocheso oa Mobala | 2-Byte Control (Kelvin) |
| 125 | 3 Byte | I | C - W - - | DPT_Mmala_RGB | [0 – 255] * 3 | [RGBW] Mmala oa RGB | Taolo ea RGB ea 3-Byte |
| 2 Byte | I | C - W - - | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx+TWx] Mocheso oa Mobala | 2-Byte Control (Kelvin) | |
| 126 | 6 Byte | I | C - W - - | DPT_Mmala_RGBW | [0 -1] *4 – [0 – 255] * 4 | [RGBW] RGBW Mmala | Taolo ea RGBW ea 6-Byte |
| 126, 157 | 6 Byte | I | C - W - - | DPT_Brightness_Colour_Temperature_Transition | [0 – 255] * 6 | [TWx] Mocheso oa Mobala le Phetoho ea Leseli | Taolo ea 6-Byte |
| 126 | 6 Byte | I | C - W - - | DPT_Brightness_Colour_Temperature_Transition | [0 – 255] * 6 | [TWx+TWx] Mocheso oa Mobala
le Luminosity Transition |
Taolo ea 6-Byte |
| 127 | 3 Byte | I | C - W - - | 1.xxx | [0 – 255] * 3 | [RGB] Mmala oa HSV | Taolo ea HSV ea 3-Byte |
| 127, 158 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] HCL | 0 = Tlosa; 1 = Kenya tshebetsong |
| 127 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] HCL | 0 = Tlosa; 1 = Kenya tshebetsong |
| 128, 159 | 2 Byte | I | C - W - - | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx] HCL: Mocheso oa Mobala | Mocheso oa Mobala (Kelvin) |
| 128 | 2 Byte | I | C - W - - | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx+TWx] HCL: Mocheso oa Mobala | Mocheso oa Mobala (Kelvin) |
| 129 | 1 Byte | I | C - W - - | DPT_SceneControl | 1 - 22 | [RGBW] Mmala o otlolohileng | Nomoro ea Mmala (Boemo ba 1 - 22) |
| 1 Byte | I | C - W - - | DPT_SceneControl | 1 - 22 | [RGB] Mmala o otlolohileng | Nomoro ea Mmala (Boemo ba 1 - 22) | |
| 129, 160 | 1 Byte | I | C - W - - | DPT_SceneControl | 1 - 6 | [TWx] Mmala o otlolohileng | Nomoro ea Mmala (Boemo ba 1 - 6) |
| 129 | 1 Byte | I | C - W - - | DPT_SceneControl | 1 - 6 | [TWx+TWx] Mmala o otlolohileng | Nomoro ea Mmala (Boemo ba 1 - 6) |
| 130 | 1 Bit | I | C - W - - | Qala | 0/1 | [RGBW] Mobala oa Shift | 0 = Emisa; 1 = Qala |
| 1 Bit | I | C - W - - | Qala | 0/1 | [RGB] Mobala oa Shift | 0 = Emisa; 1 = Qala | |
| 130, 161 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx] Mobala oa Mocheso Shift | 0 = Emisa; 1 = Qala |
| 130 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx+TWx] Mocheso oa Mobala
Shift |
0 = Emisa; 1 = Qala |
|
131 |
4 Bit | I | C - W - - | DPT_Control_Dimming | 0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[RGBW] Mobala oa Shift | Taolo ea mebala ea 4-Bit |
| 4 Bit | I | C - W - - | DPT_Control_Dimming | [RGB] Mobala oa Shift | Taolo ea mebala ea 4-Bit | ||
| 131, 162 | 4 Bit | I | C - W - - | DPT_Control_Dimming | [TWx] Mobala oa Mocheso Shift | Taolo ea mebala ea 4-Bit | |
| 131 | 4 Bit | I | C - W - - | DPT_Control_Dimming | [TWx+TWx] Fetoha ea Mocheso oa Mobala | Taolo ea mebala ea 4-Bit | |
|
132 |
1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGBW] Mosebetsi oa Memori: Fetoha
Ho Boleng |
0 - 100% |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [RGB] Mosebetsi oa Memori: Fetoha
Ho Boleng |
0 - 100% |
| 132, 163 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx] Mosebetsi oa Memori: Fetoha
Ho Boleng |
0 - 100% |
| 132 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx+TWx] Mosebetsi oa Memori: Fetola Boleng | 0 - 100% |
| 133 | 1 Bit | I | C - W - - | Qala | 0/1 | [RGBW] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 1 Bit | I | C - W - - | Qala | 0/1 | [RGB] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong | |
| 133, 164 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 133 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx+TWx] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 134 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [RGBW] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [RGB] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong | |
| 134, 165 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [TWx] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 134 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [TWx+TWx] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 135 | 1 Bit | I | C - W - - | Qala | 0/1 | [RGBW] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 1 Bit | I | C - W - - | Qala | 0/1 | [RGB] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong | |
| 135, 166 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 135 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx+TWx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 136 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [RGBW] Lits'ebetso / Tatelano | Sebaka/Nomoro ya Tatelano |
| 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [RGB] Lits'oants'o / Tatelano | Sebaka/Nomoro ya Tatelano | |
| 136, 167 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [TWx] Scenes/Sequences | Sebaka/Nomoro ya Tatelano |
| 136 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [TWx+TWx] Scenes/Sequences | Sebaka/Nomoro ya Tatelano |
| 137 | 1 Bit | I | C - W - - | Qala | 0/1 | [RGBW] Qala / Emisa Tatelano | 0 = Emisa; 1 = Qala |
| 1 Bit | I | C - W - - | Qala | 0/1 | [RGB] Qala / Emisa Tatelano | 0 = Emisa; 1 = Qala | |
| 137, 168 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala |
| 137 | 1 Bit | I | C - W - - | Qala | 0/1 | [TWx+TWx] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala |
| 138 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGBW] Tloaelo ea ho Bula/Ho tima 1 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGB] Tloaelo ea ho Bula/Ho tima 1 | 0 = Ho tima; 1 = Bula | |
| 138, 169 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] Tloaelo ea ho Bula/Ho tima 1 | 0 = Ho tima; 1 = Bula |
| 138 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] Tloaelo ea ho Bula/Ho tima 1 | 0 = Ho tima; 1 = Bula |
| 139 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGBW] Tloaelo ea ho Bula/Ho tima 2 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGB] Tloaelo ea ho Bula/Ho tima 2 | 0 = Ho tima; 1 = Bula | |
| 139, 170 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] Tloaelo ea ho Bula/Ho tima 2 | 0 = Ho tima; 1 = Bula |
| 139 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] Tloaelo ea ho Bula/Ho tima 2 | 0 = Ho tima; 1 = Bula |
| 140 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGBW] Tloaelo ea ho Bula/Ho tima 3 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGB] Tloaelo ea ho Bula/Ho tima 3 | 0 = Ho tima; 1 = Bula | |
| 140, 171 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] Tloaelo ea ho Bula/Ho tima 3 | 0 = Ho tima; 1 = Bula |
| 140 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] Tloaelo ea ho Bula/Ho tima 3 | 0 = Ho tima; 1 = Bula |
| 141 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGBW] Tloaelo ea ho Bula/Ho tima 4 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [RGB] Tloaelo ea ho Bula/Ho tima 4 | 0 = Ho tima; 1 = Bula | |
| 141, 172 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx] Tloaelo ea ho Bula/Ho tima 4 | 0 = Ho tima; 1 = Bula |
| 141 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [TWx+TWx] Tloaelo ea ho Bula/Ho tima 4 | 0 = Ho tima; 1 = Bula |
|
142 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [RGBW] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [RGB] Senotlolo | 0 = Notlolla; 1 = Notlela | |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [RGBW] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [RGB] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 142, 173 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [TWx] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [TWx] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 142 | 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [TWx+TWx] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [TWx+TWx] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 143, 174 | 1 Bit | I | C - W - - | DPT_Trigger | 0/1 | [RGBW] White Balance | 0 = 1 = Boloka likarolo tsa RGB |
| 1 Bit | I | C - W - - | DPT_Trigger | 0/1 | [RGB] White Balance | 0 = 1 = Boloka likarolo tsa RGB | |
| 144 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [RGBW] Bula/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
| 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [RGB] Bula/E tima (Boemo) | 0 = Ho tima; 1 = Bula | |
| 144, 175 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [TWx] Bulela/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
| 144 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [TWx+TWx] Bula/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
| 145 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [RGBW] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [RGB] Boleng bo Fokolang (Boemo) | 0 - 100% | |
| 145, 176 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [TWx] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 145 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [TWx+TWx] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 146 | 3 Byte | O | CR – T – | DPT_Mmala_RGB | [0 – 255] * 3 | [RGB] Maemo a Dimming a RGB
(Boemo) |
Boemo ba 3-Byte |
| 146, 177 | 2 Byte | O | CR – T – | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx] Boleng ba Thempereicha ea Mmala (Boemo) | Mocheso oa Mobala (Kelvin) |
| 146 | 3 Byte | O | CR – T – | DPT_Mmala_RGB | [0 – 255] * 3 | [RGBW] RGB Dimming Maleng
(Boemo) |
Boemo ba 3-Byte |
| 2 Byte | O | CR – T – | DPT_Absolute_Mmala_Mocheso | 0 - 65535 | [TWx+TWx] Mocheso oa Mobala
Boleng (Boemo) |
Mocheso oa Mobala (Kelvin) | |
| 147, 178 | 6 Byte | O | CR – T – | DPT_Mmala_RGBW | [0 -1] *4 – [0 – 255] * 4 | [RGBW] RGBW Dimming Maleng (Boemo) | Boemo ba 6-Byte |
| 148 | 3 Byte | O | CR – T – | 1.xxx | [0 – 255] * 3 | [RGB] HSV Dimming Maleng
(Boemo) |
Boemo ba 3-Byte |
| 148, 179 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [TWx] HCL (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 148 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [TWx+TWx] HCL (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 180, 200, 220, 240 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx] Boemo bo phahameng ba Leseli | 20 - 100% |
|
180 |
1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx] Boemo bo phahameng ba Leseli | 20 - 100% |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx+Cx] Leseli le Lengata
Boemo |
20 - 100% | |
| 180, 220 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx] Boemo bo phahameng ba Leseli | 20 - 100% |
| 181, 201, 221, 241 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Bula/Koala | 0 = Ho tima; 1 = Bula |
|
181 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [R] Ho tima/Ho tima | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] Bulela/Tima | 0 = Ho tima; 1 = Bula | |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx] Bulela/Tima | 0 = Ho tima; 1 = Bula | |
| 181, 221 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx] Bula/Koala | 0 = Ho tima; 1 = Bula |
| 182, 202, 222, 242 | 4 Bit | I | C - W - - | DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%) … 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[Cx] Relative Dimming | Taolo ea 4-Bit Dimmer |
|
182 |
4 Bit | I | C - W - - | DPT_Control_Dimming | [R] Relative Dimming | Taolo ea 4-Bit Dimmer | |
| 4 Bit | I | C - W - - | DPT_Control_Dimming | [Cx+Cx+Cx+Cx] Ho Finyella ho Lebeletsoeng | Taolo ea 4-Bit Dimmer | ||
| 4 Bit | I | C - W - - | DPT_Control_Dimming | [Cx+Cx+Cx] Relative Dimming | Taolo ea 4-Bit Dimmer | ||
| 182, 222 | 4 Bit | I | C - W - - | DPT_Control_Dimming | [Cx+Cx] Relative Dimming | Taolo ea 4-Bit Dimmer | |
| 183, 203, 223, 243 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 183 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [R] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 183, 223 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
|
183 |
1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx+Cx] Ruri
Ho fifala |
Taolo ea Dimmer ea 1-Byte |
| 184, 185, 186, 204,
205, 206, 224, 225, 226, 244, 245, 246 |
2 Byte |
I |
C - W - - |
DPT_TimePeriodSec |
0 - 65535 |
[Cx] Nako ea ho Finyella x |
Nako ka Metsotsoana |
| 184, 185, 186 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [Cx+Cx+Cx] Nako ea Dimming x | Nako ka Metsotsoana |
| 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [Cx+Cx+Cx+Cx] Nako ea ho Finyella x | Nako ka Metsotsoana | |
| 184, 185, 186, 224,
225, 226 |
2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [Cx+Cx] Nako ea ho Finyella x | Nako ka Metsotsoana |
| 187, 207, 227, 247 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx] Mosebetsi oa Memori: Fetola Boleng | 0 - 100% |
|
187 |
1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx] Mosebetsi oa Memori:
Fetola Boleng |
0 - 100% |
| 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx+Cx] Mosebetsi oa Memori: Fetola Boleng | 0 - 100% | |
| 187, 227 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [Cx+Cx] Mosebetsi oa Memori: Fetoha
Ho Boleng |
0 - 100% |
| 188, 208, 228, 248 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 188 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx+Cx] Nako e Bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx] Nako e Bonolo | 0 = Tlosa; 1 = Kenya tshebetsong | |
| 188, 228 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 189, 209, 229, 249 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [Cx] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
|
189 |
1 Bit | O | CR – T – | DPT_Bool | 0/1 | [Cx+Cx+Cx+Cx] Nako ea Temoso
(Boemo) |
0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [Cx+Cx+Cx] Nako ea Temoso
(Boemo) |
0 = E notletsoe; 1 = E kentsoe tšebetsong | |
| 189, 229 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [Cx+Cx] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 190, 210, 230, 250 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 190 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx+Cx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 190, 230 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 190 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 191, 211, 231, 251 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [Cx] Scenes/Sequences | Sebaka/Nomoro ya Tatelano |
|
191 |
1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [Cx+Cx+Cx+Cx] Litšoantšo/Tatelano | Sebaka/Nomoro ya Tatelano |
| 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [Cx+Cx+Cx] Litšoantšo/Tatelano | Sebaka/Nomoro ya Tatelano | |
| 191, 231 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [Cx+Cx] Scenes/Sequences | Sebaka/Nomoro ya Tatelano |
| 192, 212, 232, 252 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala |
|
192 |
1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx+Cx] Qala/Emisa
Tatelano |
0 = Emisa; 1 = Qala |
| 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx+Cx] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala | |
| 192, 232 | 1 Bit | I | C - W - - | Qala | 0/1 | [Cx+Cx] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala |
| 193, 213, 233, 253 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Tloaelo ea ho Buloa/E tima 1 | 0 = Ho tima; 1 = Bula |
|
193 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlohile 1 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlosa 1 | 0 = Ho tima; 1 = Bula | |
| 193, 233 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx] Tloaelo ea ho Buloa/E tima 1 | 0 = Ho tima; 1 = Bula |
| 194, 214, 234, 254 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Tloaelo ea ho Buloa/E tima 2 | 0 = Ho tima; 1 = Bula |
|
194 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlohile 2 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlosa 2 | 0 = Ho tima; 1 = Bula | |
| 194, 234 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx] Tloaelo ea ho Buloa/E tima 2 | 0 = Ho tima; 1 = Bula |
| 195, 215, 235, 255 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Tloaelo ea ho Buloa/E tima 3 | 0 = Ho tima; 1 = Bula |
|
195 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlohile 3 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlosa 3 | 0 = Ho tima; 1 = Bula | |
| 195, 235 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx] Tloaelo ea ho Buloa/E tima 3 | 0 = Ho tima; 1 = Bula |
| 196, 216, 236, 256 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx] Tloaelo ea ho Buloa/E tima 4 | 0 = Ho tima; 1 = Bula |
|
196 |
1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlohile 4 | 0 = Ho tima; 1 = Bula |
| 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx+Cx] Tloaelo ea ho Bula/E Tlosa 4 | 0 = Ho tima; 1 = Bula | |
| 196, 236 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Cx+Cx] Tloaelo ea ho Buloa/E tima 4 | 0 = Ho tima; 1 = Bula |
|
197, 217, 237, 257 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx] Senotlolo | 0 = Notlela; 1 = Notlolla | |
|
197 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx+Cx+Cx] Senotlolo | 0 = Notlela; 1 = Notlolla |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx+Cx+Cx] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx+Cx] Senotlolo | 0 = Notlolla; 1 = Notlela | |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx+Cx] Senotlolo | 0 = Notlela; 1 = Notlolla | |
|
197, 237 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [Cx+Cx] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 198, 218, 238, 258 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Cx] Bula/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
|
198 |
1 Bit | O | CR – T – | DPT_Switch | 0/1 | [R] Bula/Koala (Boemo) | 0 = Ho tima; 1 = Bula |
| 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Cx+Cx+Cx] E butse/E tima (Boemo) | 0 = Ho tima; 1 = Bula | |
| 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Cx+Cx+Cx+Cx] E butse/E tima (Boemo) | 0 = Ho tima; 1 = Bula | |
| 198, 238 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Cx+Cx] E butse/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
| 199, 219, 239, 259 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [Cx] Boleng bo Nyenyehang (Boemo) | 0 - 100% |
|
199 |
1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [R] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx] Boleng bo Fokolang (Boemo) | 0 - 100% | |
| 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [Cx+Cx+Cx+Cx] Boleng bo Fetohang
(Boemo) |
0 - 100% | |
| 199, 239 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [Cx+Cx] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 201 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [G] Bulela/Tima | 0 = Ho tima; 1 = Bula |
|
202 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[G] Ho fifala ho hong |
Taolo ea 4-Bit Dimmer |
| 203 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [G] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 218 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [G] Bulela/Koala (Boemo) | 0 = Ho tima; 1 = Bula |
| 219 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [G] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 221 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [B] Bulela/Tima | 0 = Ho tima; 1 = Bula |
|
222 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[B] Ho fifala ho hong |
Taolo ea 4-Bit Dimmer |
| 223 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [B] Ho fifala ka ho Feletseng | Taolo ea Dimmer ea 1-Byte |
| 238 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [B] Bula/E tima (Boemo) | 0 = Ho tima; 1 = Bula |
| 239 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [B] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 240 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [W] Boemo bo phahameng ba Leseli | 20 - 100% |
| 241 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [W] Bula/Tima | 0 = Ho tima; 1 = Bula |
|
242 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[W] Relative Dimming |
Taolo ea 4-Bit Dimmer |
| 243 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [W] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 244, 245, 246 | 2 Byte | I | C - W - - | DPT_TimePeriodSec | 0 - 65535 | [W] Nako ea ho Finyella x | Nako ka Metsotsoana |
| 247 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [W] Mosebetsi oa Memori: Bula
Boleng |
0 - 100% |
| 248 | 1 Bit | I | C - W - - | Qala | 0/1 | [W] Nako e bonolo | 0 = Tlosa; 1 = Kenya tshebetsong |
| 249 | 1 Bit | O | CR – T – | DPT_Bool | 0/1 | [W] Nako ea Temoso (Boemo) | 0 = E notletsoe; 1 = E kentsoe tšebetsong |
| 250 | 1 Bit | I | C - W - - | Qala | 0/1 | [W] Ho benya | 0 = Tlosa; 1 = Kenya tshebetsong |
| 251 | 1 Byte | I | C - W - - | DPT_SceneControl | 0-63; 128-191 | [W] Lits'oants'o / Tatelano | Sebaka/Nomoro ya Tatelano |
| 252 | 1 Bit | I | C - W - - | Qala | 0/1 | [W] Qala/Emisa Tatelano | 0 = Emisa; 1 = Qala |
| 253 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [W] Tloaelo ea ho Bula/Ho Koala 1 | 0 = Ho tima; 1 = Bula |
| 254 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [W] Tloaelo ea ho Bula/Ho Koala 2 | 0 = Ho tima; 1 = Bula |
| 255 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [W] Tloaelo ea ho Bula/Ho Koala 3 | 0 = Ho tima; 1 = Bula |
| 256 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [W] Tloaelo ea ho Bula/Ho Koala 4 | 0 = Ho tima; 1 = Bula |
|
257 |
1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [W] Senotlolo | 0 = Notlolla; 1 = Notlela |
| 1 Bit | I | C - W - - | DPT_Etsa | 0/1 | [W] Senotlolo | 0 = Notlela; 1 = Notlolla | |
| 258 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [W] Bula/Koala (Boemo) | 0 = Ho tima; 1 = Bula |
| 259 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [W] Boleng bo Fokolang (Boemo) | 0 - 100% |
|
260 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[H] Relative Dimming |
Taolo ea 4-Bit Dimmer |
|
260, 266, 269 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
[TWx] Mocheso oa Mocheso oa 'Mala o Relative Dimming | Taolo ea 4-Bit Dimmer (0% = Mofuthu, 100% = Mohatsela) | |
|
260 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
[TWx+TWx] Mocheso oa Mocheso oa 'Mala o Fetolelang | Taolo ea 4-Bit Dimmer (0% = Mofuthu, 100% = Mohatsela) | |
| 261 | 1 Byte | I | C - W - - | DPT_Angle | 0 – 360° | [H] Ho fifala ka ho feletseng | Taolo ea Dimmer ea 1-Byte |
| 261, 267, 270 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx] Mocheso oa Mobala o Felletseng o Felletseng | Taolo ea Dimmer ea 1-Byte (0% = Mofuthu, 100% = Mohatsela) |
| 261 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [TWx+TWx] Mocheso oa Mobala
Ho fifala ka ho feletseng |
Taolo ea Dimmer ea 1-Byte (0% =
Mofuthu, 100% = Ho bata) |
| 262 | 1 Byte | O | CR – T – | DPT_Angle | 0 – 360° | [H] Boleng bo Fokolang (Boemo) | 0 – 360° |
| 262, 268, 271 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [TWx] Boleng ba Thempereichara ea 'Mala (Boemo) | Mocheso oa 'Mala (0% = Mofuthu, 100% = Mohatsela) |
| 262 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [TWx+TWx] Mocheso oa Mobala
Theko e Nyenyehang (Boemo) |
Mocheso oa Mmala (0% = Mofuthu,
100% = Ho bata) |
|
263 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[S] Relative Dimming |
Taolo ea 4-Bit Dimmer |
| 264 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [S] Ho fifala ka ho Fetisisa | Taolo ea Dimmer ea 1-Byte |
| 265 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [S] Boleng bo Fokolang (Boemo) | 0 - 100% |
|
266, 269 |
4 Bit |
I |
C - W - - |
DPT_Control_Dimming |
0x0 (Detener) 0x1 (Reducir 100%)
… 0x7 (Reducir 1%) 0x8 (Detener) 0x9 (Subir 100%) … 0xF (Subir 1%) |
[V] Ho fifala ho hong |
Taolo ea 4-Bit Dimmer |
| 267, 270 | 1 Byte | I | C - W - - | DPT_Scaling | 0% - 100% | [V] Ho fifala ka ho Feletseng | Taolo ea Dimmer ea 1-Byte |
| 268, 271 | 1 Byte | O | CR – T – | DPT_Scaling | 0% - 100% | [V] Boleng bo Fokolang (Boemo) | 0 - 100% |
| 272 | 1 Bit | I | C - W - - | DPT_Switch | 0/1 | [Motlakase oa Phepelo ea Matla] Switch On/Off | 0 = Ho tima; 1 = Bula |
| 273 | 1 Bit | O | CR – T – | DPT_Switch | 0/1 | [Motlakase oa Phepelo ea Matla] On/Off
(Boemo) |
0 = Ho tima; 1 = Bula |
Kena 'me u re romelle lipotso tsa hau mabapi le lisebelisoa tsa Zennio: https://support.zennio.com
Zennio Avance y Tecnología SL C/ Río Jarama, 132. Nave P-8.11 45007 Toledo, Spain.
Mohala +34 925 232 002 www.zennio.com info@zennio.com
Tšehetso ea tekheniki: https://support.zennio.com
Litokomane / Lisebelisoa
 |
Zennio ZDILX4V2 Channel Constant Voltagle PWM Dimmer [pdf] Bukana ea Mosebelisi ZDILX4V2 Channel Constant Voltage PWM Dimmer, ZDILX4V2, Channel Constant Voltage PWM Dimmer, Moqtagle PWM Dimmer, PWM Dimmer, Dimmer |
