XUNCHIP XM8586 Impeller Type Wind Speed Sensor
Litlhaloso:
- Lebitso: XUNCHIP
- Lebelo la lebelo la moya: 0 ~ 30m / s
- Wind speed accuracy: Induction principle – Thermal film induction
- Sehokelo: RS485/4-20mA/DC0-10V
- Matla: DC12~24V 1A
- Thempereichara e sebetsang: -30 ~ 80°C
- Mongobo o sebetsang: 5%RH~90%RH
Litaelo tsa Tšebeliso ea Sehlahisoa
Product Selection:
The XM8586 product comes in different models based on the output method:
- XM8586B – RS485
- XM8586M – 4-20mA
- XM8586V10 – DC0-10V
Boholo ba Sehlahisoa:
If there are broken wires, wire them as shown in the figure. If the product itself has no leads, the core color is for reference.
Mokhoa oa ho Sebelisa:
The product uses the RS485 MODBUS-RTU standard protocol format with hexadecimal data. Default device address is 1 and default baud rate varies.
Read Data (Function code 0x03):
Example inquiry frame:
To query 1 piece of data of device No. 1, the host computer sends the command: 01 03 00 00 00 01 84 0A
Common Data Address Table:
| Ngolisa Aterese | Register Data Type | Boleng ba Boleng | Tlhaloso |
|---|---|---|---|
| 40001 | Bala Feela | 0-65535 | Lebelo la moya |
| 40101 | Bala feela | 0-59999 | Khoutu ea Mohlala |
| 40102 | Bala feela | 1-1600 | Total Number of Measuring Points |
| 40103 | Bala/Ngola | 1-249 | Aterese ea Sesebelisoa |
XM8586 using the standard ,easy access to PLC DCS and other instruments or systems for monitoring wind speed state quantities.The internal use of high precision sensing core and related devices to ensure high reliability and excellent long term stabil ity,can be cust omized
Tekheniki Parameters
| Tekheniki parameter | Boleng ba paramethara |
| Brand | XUNCHIP |
| Lebelo la lebelo la moya | 0 ~ 30m / s |
| Ho nepahala ha lebelo la moya | ±3% |
| Molao-motheo oa induction | Ho kenya filimi ea mocheso |
| Sehokedi | RS485/4-20mA/DC0-10V |
| Matla | DC12~24V 1A |
| Mocheso o mathang | -30 ~ 80 ℃ |
| Mongobo o sebetsang | 5%RH~90%RH |
Khetho ea Sehlahisoa
Product DesignRS485,4 20mA,DC0 10VMultiple output methods, the products are divided into the following models depending on the output method.
| Mohlala oa sehlahisoa | mokhoa oa tlhahiso |
| XM8586B | RS485 |
| XM8586M | 4-20mA |
| XM8586V10 | DC0-10V |
Boholo ba Sehlahisoa
In the case of broken wires, wire the wires as shown in the figure. If the product itself has no labels, the core color is for reference.
Mokhoa oa ho sebelisa
The impeller wind speed sensor can be used to measure wind speed in railways, engineering, meteorology, environment,greenhouses, construction sites, agriculture, medical and other fields
Tharollo ea kopo
Mokhoa oa ho kopanya oa RS485
Mokhoa oa hona joale oa wiring
Moqtagmokhoa oa ho wiring
Lenane la Lihlahisoa
Adjustable impeller type air speed transmitter quantity: 1 pcs
Puisano Protocol
The product uses the RS485 MODBUS RTU standard protocol format, and all operation or reply commands are in hexadecimal data. When the device leaves the factory, the default device address is 1 ,and the default baud rate is: for modules and non-recording instruments: 9600, 8, n, 1 (for the recorder series products, the default is: 115200, 8, n, 1).
Read data (Function code Ox03)
Foreimi ea lipatlisiso (ka hexadecimal). Example of sending: To query 1 piece of data of device No. 1, the host computer sends the command: 01 03 00 00 00 01 84 OA.
| Aterese | Khoutu ea tšebetso | Aterese ea ho qala | Bolelele ba data | Checksum |
| 01 | 03 | 00 00 | 00 01 | 84 0A |
Bakeng sa foreimi e nepahetseng ea lipatlisiso, sesebelisoa se tla arabela ka data: 01 03 02 02 18 B9 2E , 'me mokhoa oa karabo ke:
| Aterese | Khoutu ea tšebetso | Bolelele | Boitsebiso 1 | Checksum |
| 01 | 03 | 02 | 02 18 | B9 2E |
Tlhaloso ea lintlha: Lintlha tse taelong li ho hexadecimal. Ho nka data 1 joalo ka mohlalaample, 02 18 e fetoletsoeng ho boleng ba decimal ke 536. Ho nka hore data magnification factor ke 100, joale boleng ba 'nete ke 536/100 = 5.36,' me tse ling li ka fumanoa ka papiso.
Tafole ea Aterese e Tloaelehileng
| Tlhophiso
Aterese |
Ngolisa Aterese | Ngodisa
Tlhaloso |
Mofuta oa data | Boleng ba Boleng |
| 40001 | 00 00 | lebelo la moya | Bala Feela | 0-65535 |
| 40101 | 00 64 | Khoutu ea Mohlala | Bala feela | 0-59999 |
| 40102 | 00 65 | Kakaretso ea Nomoro ea
Lintlha tsa ho Lekanya |
Bala feela | 1-1600 |
| 40103 | 00 66 | Aterese ea Sesebelisoa | Bala/Ngola | 1-249 |
| 40104 | 00 67 | Baud Rate | Bala/Ngola | 0-6 |
| 40105 | 00 68 | Puisano
Mokhoa |
Bala/Ngola | 1 Potso |
| 40106 | 00 69 | Mofuta oa Protocol | Bala/Ngola | 1 MODBUS-RTU |
Bala le ho fetola aterese ea sesebelisoa
- Bala kapa botsa aterese ea sesebelisoa
Haeba u sa tsebe aterese ea hona joale ea sesebelisoa mme ho na le sesebelisoa se le seng feela beseng, u ka botsa aterese ea sesebelisoa ka taelo ea FA 03 00 66 00 01 71 9E .Aterese ea sesebelisoa Khoutu ea tšebetso Aterese ea ho qala Bolelele ba data Checksum FA 03 00 66 00 01 71 9E FA, e leng 250, ke aterese ea bokahohle. Ha o sa tsebe aterese, o ka sebelisa 250 ho fumana aterese ea 'nete ea sesebelisoa. 00 66 ke ngoliso ea aterese ea sesebelisoa.
For a correct query c ommand, the device will respond. For example, lintlha tsa karabelo ke: 01 03 02 00 01 79 84. Tlhahlobo ea sebopeho e bontšitsoe tafoleng e latelang:Aterese ea sesebelisoa Khoutu ea tšebetso Aterese ea ho qala ID ea aterese Checksum 01 03 02 00 01 79 84 In the response data, th e first byte 01 represents the real address of the current device.
- Fetola aterese ea sesebelisoa
Bakeng sa mohlalaample, haeba aterese ea hajoale ea sesebelisoa ke 1 mme o batla ho e fetola ho 02, taelo ke: 01 06 00 66 00 02 E8 14 .Aterese ea sesebelisoa Khoutu ea tšebetso Ngolisa aterese Aterese ea sepheo Checksum 01 06 00 66 00 02 E8 14 Ka mor'a hore phetoho e atlehe, sesebelisoa se tla khutlisetsa boitsebiso: 02 06 00 66 00 02 E8 27. Tlhahlobo ea sebopeho e bontšoa tafoleng e latelang:
| Aterese ea sesebelisoa | Khoutu ea tšebetso | Ngolisa aterese | Aterese ea sepheo | Checksum |
| 02 | 06 | 00 66 | 00 02 | E8 27 |
Lintlha tsa karabo, ka mor'a hore phetoho e atlehe, byte ea pele ke aterese e ncha ea sesebelisoa.
Generally, after the device address is changed, it takes effe ct immediately. At this time, users need to modify the query commands in their own software accordingly.
Bala le ho fetola sekhahla sa baud
- Bala sekhahla sa baud
Sekhahla sa baud sa fektheri se sa feleng sa sesebelisoa ke 9600. Haeba o hloka ho se fetola, o ka etsa ts'ebetso ea phetoho ho latela tafole e latelang le protocol e lumellanang ea puisano. Bakeng sa mohlalaample, ho bala tekanyo ea baud ID ea sesebelisoa sa hona joale, taelo ke: 01 03 00 67 00 01 35 D5 . Tlhahlobo ea sebopeho e tjena.Aterese ea sesebelisoa Khoutu ea tšebetso Aterese ea ho qala Bolelele ba data Checksum 01 03 00 67 00 01 35 D5 Bala khoutu ea sekhahla sa baud ea sesebelisoa sa hajoale. Likhoutu tsa sekhahla sa Baud: 1 bakeng sa 2400; 2 bakeng sa 4800; 3 bakeng sa 9600; 4 bakeng sa 19200; 5 bakeng sa 38400; 6 bakeng sa 115200.
For a correct quer y command, the device will respond. For example, lintlha tsa karabelo ke: 01 03 02 00 03 F8 45. Tlhahlobo ea sebopeho e bontšoa tafoleng e latelang:Aterese ea sesebelisoa Khoutu ea tšebetso Bolelele ba data Baud reiti khoutu Checksum 01 03 02 00 03 F8 45 Ho latela khoutu ea sekhahla sa baud, 03 e emela 9600, ho bolelang hore sekhahla sa hona joale sa sesebelisoa ke 9600.
- Fetola sekhahla sa baud
Bakeng sa mohlalaample, ho fetola sekhahla sa baud ho tloha 9600 ho ea ho 38400, ke hore, fetola khoutu ho tloha ho 3 ho ea ho 5, taelo ke: 01 06 00 67 00 05 F8 16 .
| Aterese ea sesebelisoa | Khoutu ea tšebetso | Ngolisa aterese | Sekhahla sa baud | Checksum |
| 01 | 06 | 00 67 | 00 05 | F8 16 |
Change the baud rate from 9600 to 38400, that is, change the code from 3 to 5. The new baud rate will take effect immediately. At this time, the device will stop responding, and the query command for the device’s baud rate needs to be modified accordin gly.
Bala 'me u fetole boleng ba tokiso (e sebetsang bakeng sa lihlahisoa tse ling)
- Bala boleng ba tokiso
When there is an error between the data and the reference standard, we can reduce the display error by adjusting the “correction value”. The ad justable range of the correction difference is plus or minus 1000,that is, the value range is 0 1000 or 64535 65535. For example, ha boleng bo bontšitsoeng ke 100 ka tlase ho boleng ba sebele, re ka bo lokisa ka ho eketsa 100. Taelo ke: 01 03 00 6B 00 01 F5 D6 . Taelong, 100 ke boleng ba hexadecimal 0x64. Haeba o hloka ho fokotsa boleng, o ka beha boleng bo fosahetseng. Bakeng sa mohlalaample, 100 corresponds to the hexadecimal value FF 9C. The calculation method is 100 65535 = 65435, and then convert it to hexadecimal, which is 0x FF 9C. The device correction value starts from 00 6B. We take the first parameter as an example for illustration. When there are multiple parameters,the methods for reading and modifying the correction value are the same.Aterese ea sesebelisoa Khoutu ea tšebetso Aterese ea ho qala Bolelele ba data Checksum 01 03 00 6B 00 01 F5 D6 Bakeng sa taelo e nepahetseng ea potso, sesebelisoa se tla arabela. Bakeng sa mohlalaample, lintlha tsa karabo ke: 01 03 02 00 64 B9 AF. Tlhahlobo ea sebopeho e bontšitsoe tafoleng e latelang:
Aterese ea sesebelisoa Khoutu ea tšebetso Bolelele ba data Boleng ba ho lokisa Checksum 01 03 02 00 64 B9 AF Litabeng tsa likarabo, byte ea pele 01 e emela aterese ea sebele ea sesebelisoa sa hona joale, 'me 00 6B ke ngoliso ea boleng ba tokiso ea phetoho ea boemo ba pele. Haeba sesebelisoa se na le li-parameter tse ngata, mekhoa ea ts'ebetso ea lisebelisoa tse ling e tšoana. Ka kakaretso, li-sensor tsa mocheso le mongobo li na le parameter ena, athe li-sensor tse bobebe hangata ha li na eona.
- Change the corre ction value
Bakeng sa mohlalaample, haeba boleng ba boemo ba hona joale bo fokolang haholo 'me re batla ho eketsa boleng ba eona ba sebele ka 1, taelo ea ho lokisa boleng ba hona joale ka ho eketsa 100 ke: 01 06 00 6B 00 64 F9 FD .
| Aterese ea sesebelisoa | Khoutu ea tšebetso | Ngolisa aterese | Aterese ea sepheo | Checksum |
| 01 | 06 | 00 6B | 00 64 | F9 FD |
Kamora hore ts'ebetso e atlehe, sesebelisoa se tla khutlisa tlhahisoleseling: 01 06 00 6B 00 64 F9 FD. Ka mor'a hore phetoho e atlehe, parameter e sebetsa hang-hang.
Bakeng sa mohlalaampl e, the range is 0~30m/s, the analog output is 4~20mA current signal, wind speed and current The calculation relationship is as shown in the formula: C = (A2 A1) * (X B1) / (B2 B1) + A1, where A2 is wind speed range upper limit, A1 is the lower limit of the range, B2 is current output range upper limit,B1 is the lower limit, X is the currently read wind speed value, and C is the calculated current value. The list of commonly used values is as follows:
| jwale(mA) | lebelo la moeaBoleng (m/s) | Mokhoa oa Palo |
| 4 | 0.0 | (30-0)*(4-4)÷(20-4)+0 |
| 5 | 1.9 | (30-0)*(5-4)÷(20-4)+0 |
| 6 | 3.8 | (30-0)*(6-4)÷(20-4)+0 |
| 7 | 5.6 | (30-0)*(7-4)÷(20-4)+0 |
| 8 | 7.5 | (30-0)*(8-4)÷(20-4)+0 |
| 9 | 9.4 | (30-0)*(9-4)÷(20-4)+0 |
| 10 | 11.3 | (30-0)*(10-4)÷(20-4)+0 |
| 11 | 13.1 | (30-0)*(11-4)÷(20-4)+0 |
| 12 | 15.0 | (30-0)*(12-4)÷(20-4)+0 |
| 13 | 16.9 | (30-0)*(13-4)÷(20-4)+0 |
| 14 | 18.8 | (30-0)*(14-4)÷(20-4)+0 |
| 15 | 20.6 | (30-0)*(15-4)÷(20-4)+0 |
| 16 | 22.5 | (30-0)*(16-4)÷(20-4)+0 |
| 17 | 24.4 | (30-0)*(17-4)÷(20-4)+0 |
| 18 | 26.3 | (30-0)*(18-4)÷(20-4)+0 |
| 19 | 28.1 | (30-0)*(19-4)÷(20-4)+0 |
| 20 | 30.0 | (30-0)*(20-4)÷(20-4)+0 |
As shown in the above formula, when measuring 8mA, current current is 11.5m/s 。
Bakeng sa mohlalaampLe, mefuta e fapaneng ke 0 ~ 30m/s, tlhahiso ea analoge ke 0 ~ 10V DC0 10Vvoltage, lebelo la moea le DC0 10Vvoltage The ca lculation relationship is as shown in the formula: C = (A2 A1) * (X B1) / (B2 B1) + A1, where A2 is wind speed range upper limit, A1 is the lower limit of the range, B2 is DC0 10Vvoltage output range upper limit, B1 is the lower limit, X is the currently r ead wind speed value, and C is the calculated DC0 10Vvoltage bohlokoa. Lethathamo la litekanyetso tse sebelisoang hangata ke le latelang:
| DC0-10Vvoltage (V) | lebelo la moeaBoleng (m/s) | Mokhoa oa Palo |
| 0 | 0.0 | (30-0)*(0-0)÷(10-0)+0 |
| 1 | 3.0 | (30-0)*(1-0)÷(10-0)+0 |
| 2 | 6.0 | (30-0)*(2-0)÷(10-0)+0 |
| 3 | 9.0 | (30-0)*(3-0)÷(10-0)+0 |
| 4 | 12.0 | (30-0)*(4-0)÷(10-0)+0 |
| 5 | 15.0 | (30-0)*(5-0)÷(10-0)+0 |
| 6 | 18.0 | (30-0)*(6-0)÷(10-0)+0 |
| 7 | 21.0 | (30-0)*(7-0)÷(10-0)+0 |
| 8 | 24.0 | (30-0)*(8-0)÷(10-0)+0 |
| 9 | 27.0 | (30-0)*(9-0)÷(10-0)+0 |
| 10 | 30.0 | (30-0)*(10-0)÷(10-0)+0 |
Joalokaha ho bontšitsoe ka foromo e ka holimo, ha u lekanya 5V, DC0-10Vvol ea hona joaletagke 15m/s.
Boithorollo
This document provides all information about the product, does not grant any license to intellectual property, does not express or imply, and prohibits any other means of granting any intellectual property rights, such as the statement of sales terms and conditions of this product, other issues.
No liability is assumed. Furthermore, our company makes no warranties, express or implied, regarding the sale and use of this product, including the suitability for the specific use of the product, the marketability or the infringement liability for any patent, copyright or other intellectual property rights, etc. Product specifications and product descriptions may be modified at any time without notice.
Iteanye le rona
- Lebitso: XUNCHIP
- Aterese: Room 208, Building 8, No. 215, Nandong Road, Baoshan District, Shanghai, Xinxin Brand Business Department
Sebaka sa China: http://www.xunchip.com
Sebaka sa machaba: http://www.xunchip.com
SKYPE: soobuu
E-mail: sale@sonbest.com
Mohala: 86-021-51083595 / 66862055/66862075/66861077
LBH
Q: Aterese ea kamehla ea sesebelisoa bakeng sa XM8586 ke efe?
A: The default device address is 1.
Q: What is the wind speed range for XM8586?
A: The wind speed range is 0~30m/s.
Q: What are the available output methods for XM8586?
A: XM8586 supports RS485, 4-20mA, and DC0-10V output methods.
Litokomane / Lisebelisoa
 |
XUNCHIP XM8586 Impeller Type Wind Speed Sensor [pdf] Bukana ea Mosebelisi XM8586B, XM8586M, XM8586V10, XM8586 Impeller Type Wind Speed Sensor, XM8586, Impeller Type Wind Speed Sensor, Type Wind Speed Sensor, Wind Speed Sensor, Speed Sensor |