Winsen ZPHS01C Multi In One Air Quality Monitoring Sensor User Manual
Polelo
Tokelo ena ea litokelo tsa molao ke ea Zhengzhou Winsen Electronics Technology Co., LTD. Ntle le tumello e ngotsoeng, karolo efe kapa efe ea bukana ena e ke ke ea kopitsoa, ea fetoleloa, ea bolokoa sebakeng sa polokelo ea litaba kapa sistimi ea ho khutlisa, hape e ke ke ea hasana ka mokhoa oa elektroniki, oa ho kopitsa, le oa ho rekota. Re leboha ho reka sehlahisoa sa rona. E le ho lumella bareki ho e sebelisa hamolemo le ho fokotsa liphoso tse bakoang ke tšebeliso e mpe, ka kopo bala bukana ka hloko 'me u e sebetse ka nepo ho latela litaelo. Haeba basebelisi ba sa mamele lipehelo kapa ba tlosa, ba qhaqha, ba fetola likarolo tse ka hare ho sensor, re ke ke ra ikarabella bakeng sa tahlehelo. Tse khethehileng joalo ka 'mala, chebahalo, boholo ... joalo-joalo, ka kopo li tla atleha. Re inehetse ho nts'etsopele ea lihlahisoa le boqapi ba tekheniki, kahoo re na le tokelo ea ho ntlafatsa lihlahisoa ntle le tsebiso. Ka kopo netefatsa hore ke mofuta o nepahetseng pele o sebelisa bukana ena. Ka nako e ts'oanang, maikutlo a basebelisi mabapi le mokhoa o ntlafalitsoeng oa ho sebelisa a amohelehile. Ka kopo boloka bukana ea tataiso ka nepo, e le hore u ka fumana thuso haeba u e-na le lipotso nakong ea tšebeliso nakong e tlang.
Profile
Mojule ona o kopanya Electro Chemical formaldehyde, Semiconductor VOC sensor, Laser particle sensor, NDIR CO2 sensor le mocheso le mongobo. (Basebelisi ba ka khetha mofuta oa CH2O kapa mofuta oa VOC, ha ba kopane.) Sehokelo sa Puisano: TTL serial/RS485, Baud rate:9600, data bit:8, stop bit:1, parity bit: none.
Kopo
- Mohloli oa khase
- Sepholisa moea
- Tlhokomelo ea boleng ba moea
- Mohloekisi oa moea
- Sistimi ea HVAC
- Lehae le bohlale
Tlhaloso
| Mohlala | ZPHS01C |
| Khase e Lebeletsoeng | PM2.5, CO2, CH2O, TVOC, Mocheso le Mongobo |
| Khase ea tšitiso | Alcohol/CO gase...etc. |
| Sebetsa voltage | 5V (DC) |
| Karolelano ea Hona Joale | ＜ 500 mA |
| Boemo ba sebopeho | 3 V(e lumellana le 3.3V) |
| Letshwao la tlhahiso | UART/RS485 |
| Nako ea ho qeta nako | ≤ 3 mets |
| Palo ea CO2 | 400 ~ 5000ppm |
| Boemo ba PM2.5 | 0 ~ 1000ug / m3 |
| Sehlopha sa CH2O | 0 ~ 1.6ppm |
| Sehlopha sa TVOC | 4 limaraka |
| Tem. mefuta-futa | 0℃65℃ |
| Tem. nepahalo | ±0.5℃ |
| Hum. mefuta-futa | 0 ~ 100% RH |
| Hum. nepahalo | ±3% |
| Tem e sebetsang. | 0℃50℃ |
| Ho sebetsa Hum. | 15 ~ 80% RH (ha ho condensation) |
| Tem ea polokelo. | 0℃50℃ |
| Ho boloka Hum. | 0 ~ 60% RH |
| Boholo | 62.5mm (L) x 61mm(W) x 25mm(H) |
Ponahalo ea Mojule
Setšoantšo sa 1: Mofuta oa VOC
Setšoantšo sa 2: CH2O version
Mojule boholo
Pin Tlhaloso
- PIN1: GND Power input (Theminale e ka tlase)
- PIN2: +5V Power input (+5V)
- PIN3: RX serial port (serial port receiver for modules)
- PIN4: TX serial port (serial port sender for modules)
Sebopeho sa protocol ea puisano ea serial
Khomphuta e amohelang molaetsa e romela sebopeho
| Qala sebopeho | bolelele | Nomoro ea taelo | Boitsebiso 1 | …… | Lintlha n | checksum |
| HLOOHO | LEN | CMD | Boitsebiso 1 | …… | Lintlha n | CS |
| 11H | XXH | XXH | XXH | …… | XXH | XXH |
Sebopeho se qaqileng sa protocol
| Sebopeho sa protocol | Tlhaloso e qaqileng |
| Qala sebopeho | Khomphutha e kaholimo e romella [11H]，Mojule likarabo [16H] |
| Bolelele | Bolelele ba foreimi = bolelele ba data+1 (e kenyelletsa CMD+DATA) |
| Taelo No | Nomoro ea taelo |
| Lintlha | Lintlha li baloa kapa li ngotsoe, ka bolelele bo fapaneng |
| Checksum | Phapang ea kakaretso ea pokello ea data |
Tafole ea nomoro ea taelo ea serial protocol
| NO. | Mosebetsi | Taelo NO. |
| 1 | Ho bala sephetho sa tekanyo | 0x01 |
| 2 | Tekanyetso ea CO2 | 0x03 |
| 3 | Tekanyo ya ho qala/Emisa lerole | 0x0C |
Tlhaloso e qaqileng ea protocol
- Ho romela: 11 02 01 00 EC
- Karabo: 16 0B01
| Ho tsebahatsa | Decimal e sebetsang | Boleng bo tsamaisanang | ngatafatsi |
| CO2 | 400-5000 | 400 ~ 5000ppm | 1 |
| VOC | 0-3 | 0-3 boemo | 1 |
| CH2O | 0-2000 | 0~2000μg/m3 | 1 |
| PM2.5 | 0-1000 | 0 ~ 1000ug / m3 | 1 |
| Mocheso | 500-1150 | 0 ~ 65℃ | 10 |
| Mongobo | 0-1000 | 0~100% | 10 |
- Theko ea mocheso e eketseha ka 500 ho tloha ho liphetho tsa 'nete tsa tekanyo, ke hore, 0 ℃ e lumellana le palo ea 500. Boleng ba mocheso = (DF7*256+DF8-500)/10
- Boleng bo lekantsoeng bo emeloa ke li-byte tse peli, li-byte tse phahameng ka pele ha li-byte tse tlase ka morao.
- Kamora ho romella taelo ea ho botsa, haeba karabo e amoheloa, mojule o tla kenya datae motsotsoana ka bo eona. Ha ho hlokahale ho pheta taelo pele matla a tima.
Checksum le lipalo
- char e sa ngolisoang FucCheckSum(char e sa ngolisoang *i, char e sa ngolisoang)
- char e sa saenang j,tempq=0;
- tempq+=*i; ke++;
- tempq=(~tempq)+1;
- khutlela(tempq);
CO2 zero point(400ppm) calibration
Ho romela: 11 03 03 01 90 58
karabo: 16 01 03 E6
mosebetsi:CO2 lintlha tsa zero
Taelo:zero point e bolela 400ppm, ka kopo netefatsa hore sensor e se e ntse e sebetsa bakeng sa 20mins bonyane boemong ba mahloriso ba 400ppm pele o romella taelo ena.
Qala & Emisa tekanyo ea lerole
- Romella: 11 03 0C DF1 1E C2
- Karabo: 16 02 0C DF1 CS
- Mosebetsi: Tekanyo ya ho qala/Emisa lerole
- Taelo:
- Har'a taelo ea ho romela, DF1=2 e bolela tekanyo ea ho qala, DF1=1 e bolela ho emisa tekanyo;
- Har'a taelo ea karabo, DF1=2 e bolela tekanyo ea ho qala, DF1=1 e bolela ho emisa tekanyo;
- Ha sensor e fumana taelo ea tekanyo, e kena boemong ba tekanyo e tsoelang pele ka ho sa feleng.
- Romella: 11 03 0C 02 1E C0 // qala tekanyo ea lerole
- Karabo: 16 02 0C 02 DA // module e ho "tekanyo ea lerole"
- Romella: 11 03 0C 01 1E C1 // emisa tekanyo ea lerole
- Araba: 16 02 0C 01 DB // module e ho "tekanyo ea lerole le sa sebetseng"
Litemoso
- 1. Sensor ea PM2.5 mojuleng ona e loketse ho lemoha likaroloana tsa lerōle tse tloaelehileng libakeng tsa menyako. Tikoloho ea sebele ea ts'ebeliso e lokela ho leka ho qoba tikoloho ea mosi, likaroloana tse ngata tsa lerōle, tikoloho ea mongobo o phahameng, joalo ka: kichine, kamore ea ho hlapela, kamore ea ho tsuba, kantle joalo-joalo Haeba e sebelisoa tikolohong e joalo, mehato e nepahetseng ea ts'ireletso e lokela ho eketsoa ho thibela likaroloana tsa viscous. kapa likaroloana tse kholo ho tloha ho kena ho sensor, ho theha mohaho ka hare ho sensor, le ho ama ts'ebetso ea sensor.
- Mojule o lokela ho qoba ho kopana le li-solvents (ho kenyeletsoa gel ea silica le li-adhesives tse ling), liaparo, meriana, oli le likhase tse phahameng haholo.
- Module e ke ke ea koaheloa ka ho feletseng ka thepa ea resin, 'me e ke ke ea qoelisoa sebakeng se se nang oksijene, ho seng joalo ts'ebetso ea sensor e tla senyeha.
- Mojule o ke ke oa sebelisoa tikolohong e nang le khase e senyang nako e telele. Corrosivegas e tla senya sensor.
- Mojule o hloka ho futhumatsoa nako e fetang metsotso e 3 ha o buletsoe lekhetlo la pele.
- Se ke oa sebelisa mojule ona litsamaisong tse amanang le polokeho ea motho.
- U se ke ua sebelisa mojule ka kamoreng e moqotetsane, tikoloho e lokela ho kenngoa moea hantle.
- Se ke oa kenya module sebakeng se matla sa moea oa convection.
- Se ke oa beha mojule ka har'a khase ea tlhaho e nang le khatello e phahameng ea mali nako e telele. Ho beoa ha nako e telele ho tla etsa hore sensor ea zero e thellehe le ho fola butle.
- Ho thibetsoe ho sebelisa sekhomaretsi sa hot-melt kapa sealant ho tiisa mojule ka mocheso o folisang o fetang 80 ℃.
- Mojule o lokela ho ba hole le mohloli oa mocheso, 'me o qobe mahlaseli a letsatsi kapa mahlaseli a mang a mocheso.
- Mojule ha o khone ho sisinyeha kapa ho ts'oha
bareki Support
Zhengzhou Winsen Electronics Technology Co., Ltd
Eketsa.: NO.299 Jin Suo Road, National Hi-Tech Zone, Zhengzhou, 450001 China
Mohala: 0086-371-67169097 67169670
Fax: + 86- 0371-60932988
E-mail: sales@winsensor.com
Websebaka: www.winsen-sensor.com
Litokomane / Lisebelisoa
 |
Winsen ZPHS01C Multi In One Air Quality Monitoring Sensor [pdf] Bukana ea Mosebelisi ZPHS01C Multi In One Air Quality Monitoring Sensor, ZPHS01C, Multi In One Air Quality Monitoring Sensor, Air Quality Monitoring Sensor, Quality Monitoring Sensor |
