Tlhahisoleseding ya Sehlahiswa

Li-module tsa Uni-I/OTM ke lelapa la li-module tsa Input/Output tse tsamaellanang le sethala sa taolo sa UniStreamTM. Li ka sebelisoa hammoho le balaoli ba CPU le liphanele tsa HMI ho theha All-in-one Programmable Logic Controller (PLC). Li-module tse fumanehang ke UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, le UID-0016T. Litlhaloso tsa tekheniki li ka khoasolloa ho Unitronics websebaka.

Ho kenya
Ho kenya li-module tsa Uni-I/OTM:

1. Ka morao ho UniStreamTM HMI Panel efe kapa efe e nang le CPU-for-Panel.
2. Ho kena seporong sa DIN, u sebelisa Setsi sa Katoloso ea Sebaka.

Palo e kholo ea li-module tsa Uni-I/OTM tse ka hokahanngoang le molaoli a le mong oa CPU li lekanyelitsoe. Bakeng sa lintlha tse ling, ka kopo sheba maqephe a tobileng a UniStreamTM CPU kapa leha e le efe ea Likitlane tsa Katoloso ea Libaka tse amehang.

Pele O Qala
Pele o kenya sesebelisoa, installer e tlameha ho:

• Bala 'me u utloisise bukana ea mosebelisi.
• Netefatsa litaba tsa kit.

Litlhoko tsa khetho ea ho kenya
Haeba u kenya mojule oa Uni-I/O™ ho:

• Phanele ea UniStream™ HMI; Panel e tlameha ho ba le CPU-for-Panel, e kentsoeng ho latela tataiso ea ho kenya CPU-for-Panel.
• A DIN-seporo; o tlameha ho sebelisa Local Expansion Kit, e fumanehang ka tatellano e arohaneng, ho kopanya li-module tsa Uni-I/O™ ho DIN-rail ho sistimi ea taolo ea UniStream™.

Ha e 'ngoe ea matšoao a latelang a hlaha, bala a amanang litaba ka hloko:

Letšoao	Tlhaloso	Tlhaloso
	Kotsi	Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa.
	Tlhokomediso	Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa.
Tlhokomeliso	Tlhokomeliso	E-ba hlokolosi.

• Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples.
• Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
• Sehlahisoa sena se lokela ho kenngoa feela ke basebetsi ba tšoanelehang.
• Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
  Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
  Se ke oa hokela/hakolla sesebelisoa ha motlakase o buletsoe.

Mehopolo ea Tikoloho
Ha u kenya li-module tsa Uni-I / OTM, nahana ka tse latelang:

• Moea oa moea: 10mm (0.4) ea sebaka e ea hlokahala lipakeng tsa lisebelisoa tse kaholimo/ka tlase le mabota a kampetsoeng.
• Se ke oa kenya libakeng tse nang le lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho thothomela ho feteletseng, ho latela maemo le mefokolo e fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa.
• U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
• Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
• Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

Litaba tsa Kit

• 1 Uni-I/OTM module
• Li-terminal blocks tse 4 tsa I/O (2 tse ntšo le tse 2 tse bohlooho)
• Likotwana tse 1 tsa DIN-rail

Setšoantšo sa Uni-I/O™

1	Dikotwana tsa DIN-rail	Fana ka tšehetso ea 'mele bakeng sa CPU le li-module. Ho na le likotoana tse peli: e 'ngoe ka holimo (e bontšitsoeng), e 'ngoe e ka tlase (e sa bonts'itsoeng).
2	Ke / Os	Lintlha tsa khokahano ea I/O
3
4	I/O Bese – Ka ho le letshehadi	Sehokedi sa lehlakore le letshehadi
5	Senotlolo sa Sehokelo sa Bese	Tsamaisa Lock ya Sehokelo sa Bese ka ho le letshehadi, ho hokela mojule wa Uni-I/O™ ka motlakase ho CPU kapa mojulung o bapileng.
6	I/O Bese - Ka ho le letona	Sehokelo sa Lehlakore le Le letona, se rometsoe se koahetsoe. Tloha ho koaheloa ha u sa sebelisoe.
	Sekoahelo sa Sehokelo sa Libese
7	Ke / Os	Lintlha tsa khokahano ea I/O
8

9	Li-LED tsa I/O	Li-LED tse tala
10
11	Boemo ba LED	Tricolor LED, Green / Red / Orange

12	Monyako oa module	E rometsoe ka sekepe e koahetsoeng ka theipi e sireletsang ho thibela lemati hore le se ke la ngolisoa. Tlosa tepi nakong ea ho kenya.
13	Screw masoba	Lumella ho kenya liphanele; bophara ba lesoba: 4mm (0.15 ").

HLOKOMELA : Sheba leqephe la lintlha tsa module bakeng sa matšoao a LED.

Mabapi le Lihokelo tsa Libese tsa I/O
Lihokelo tsa Libese tsa I/O li fana ka lintlha tsa khokahano ea 'mele le ea motlakase lipakeng tsa li-module. Sehokelo se romelloa se koahetsoe ke sekoaelo se sireletsang, se sireletsang sehokelo ho litšila, tšenyo le ESD. Bese ea I/O - Ka ho le letšehali (#4 setšoantšong) e ka hokeloa ho CPU-for-Panel, module ea Uni-COM™ ea Puisano, ho module e 'ngoe ea Uni-I/O™ kapa Karolong ea Bofelo ea Sebaka sa Lehae. Katoloso Kit. Bese ea I/O - Ka ho le letona (#6 setšoantšong) e ka hokahanngoa le mojule o mong oa I/O, kapa ho Base Unit ea Local Expansion Kit.
Tlhokomeliso :Haeba module ea I / O e fumaneha ho qetela ho tlhophiso, 'me ha ho letho le lokelang ho hokahanngoa ho eona, u se ke ua tlosa Sekoahelo sa Sehokelo sa Bus.

Ho kenya

• Tima matla a sistimi pele o hokela kapa o hakolla li-module kapa lisebelisoa life kapa life.
• Sebelisa litemoso tse nepahetseng ho thibela Electro-Static Discharge (ESD).

Ho kenya Uni-I/O™ Module ho UniStream™ HMI Panel
HLOKOMELA: Sebopeho sa mofuta oa DIN-rail se ka morao ho phanele se fana ka tšehetso ea 'mele bakeng sa mojule oa Uni-I/O™.

1. Sheba yuniti eo o tla hokela mojule wa Uni-I/O™ ho netefatsa hore Sehokelo sa yona sa Mabese ha se a kenngwa. Haeba mojule oa Uni-I/O™ e tla ba oa ho qetela tlhophisong, u se ke oa tlosa sekoaelo sa Sehokelo sa Libese sa I/O - Ka ho le letona.
2. Bula lemati la mojule oa Uni-I/O™ ebe o o tšoara joalokaha ho bontšitsoe setšoantšong se tsamaeang le sena.
3. Sebelisa lithanele tse ka holimo le tse ka tlase (leleme & groove) ho thellela mojule oa Uni-I/O™ madulong.
4. Netefatsa hore dikotwana tsa DIN-rail tse ka hodimo le ka tlase ho mojule wa Uni-I/O™ di kene DIN-rail.
5. Tsamaisa Sehokahanyi sa Libese ho ea fihla ka ho le letšehali joalokaha ho bontšitsoe setšoantšong se tsamaeang le sehlooho sena.
6. Haeba ho se ho ntse ho e-na le mojule o ka letsohong le letona la oona, tlatsa khokahanyo ka ho thellisa senotlolo sa Bus Connector sa yuniti e haufi le ho le letšehali.
7. Haeba mojule e le oa ho qetela tlhophisong, tlohela sehokelo sa libese sa I/O se koahetsoe.

Ho tlosa Module

1. Tlosa matla a tsamaiso.
2. Hakolla litheminale tsa I/O (#2,3,7,8 setšoantšong).
3. Hakolla mojule oa Uni-I/O™ yuniti e haufi: thellela Lock ea Sehokelo sa Libese ho ea ka ho le letona. Haeba ho na le yuniti e ka letsohong la eona le letona, thellela senotlolo sa mojule ona ka ho le letona hape.
4. Mojulung oa Uni-I/O™, hulela sekotwana se kaholimo sa DIN-rail 'me sekotwana se tlase tlase.
5. Bula lemati la mojule oa Uni-I/O™ ebe u o tšoara ka menoana e ’meli joalokaha ho bontšitsoe setšoantšong se leqepheng la 3; ebe u e hula ka hloko sebakeng sa eona.

Ho kenya li-module tsa Uni-I/O™ ho DIN-rail
Ho kenya limmojule holim'a DIN-rail, latela mehato ea 1-7 ho Instola Uni-I/O™ Module ho UniStream™ HMI Panel leqepheng la 3. E le hore u hokele li-module ho controller ea UniStream™, u tlameha ho sebelisa Sebaka sa Katoloso ea Sebaka. Li-kits tsena li fumaneha ka lisebelisoa tsa motlakase le ntle le tsona, hape li na le likhoele tsa bolelele bo fapaneng. Bakeng sa tlhaiso-leseling e felletseng, ka kopo sheba tataiso ea ho instola ea Setsi sa Katoloso ea Lehae.

Linomoro tsa Modules
O ka nomora li-module bakeng sa merero ea litšupiso. Sehlopha sa listikara tse 20 se fanoa ka CPU-for-Panel e 'ngoe le e 'ngoe; sebelisa li-stickers tsena ho nomora limmojule.

• Sehlopha se na le lithupa tse nang le linomoro le tse se nang letho joalokaha ho bontšitsoe setšoantšong se ka letsohong le letšehali.
• Li behe holim'a li-module joalokaha ho bontšitsoe setšoantšong se ka ho le letona.

UL Compliance

Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mehlala e latelang: UIA-0006, UID-0808R, UID-W1616R, UIS-WCB1 li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.
Mehlala e latelang: UIA-0006, UIA-0402N, UIA-0402NL, UIA-0800N,UID-0016R,
UID-0016RL,UID-0016T,UID-0808R,UID-0808RL,UID-0808T,UID-0808THS, UID-0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-1616RID-W1616 04PTKN, UIS-04PTN, UIS-08TC, UIS-WCB1, UIS-WCB2 li thathamisitsoe ke UL bakeng sa Sebaka se Tloaelehileng.

Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.

Tlhokomeliso

• Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
• Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
• TLHOKOMELISO: Kotsi ea Ho phatloha—ho nkela likarolo sebaka sebaka ho ka sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
• KOTSI EA HO PHAHLOA - Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
• Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
• Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.

UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, UID-0016T Tataiso 

Wiring

• Thepa ena e etselitsoe ho sebetsa feela libakeng tsa SELV/PELV/Class 2/Limited Power.
• Lisebelisoa tsohle tsa motlakase tsamaisong li tlameha ho kenyelletsa ho pata habeli. Liphello tsa phepelo ea motlakase li tlameha ho lekanyetsoa joalo ka SELV/PELV/Class 2/Limited Power.
• Se ke oa hokela lets'oao la 'Neutral' kapa 'Mola' oa 110/220VAC ho ntlha ea 0V ea sesebelisoa.
• U se ke ua tšoara lithapo tse phelang.
• Mesebetsi eohle ea lithapo e lokela ho etsoa ha motlakase o TLOhile.
• Sebelisa tšireletso ea morao-rao, joalo ka fuse kapa sekhechana sa potoloho, ho qoba maqhubu a feteletseng ho koung ea phepelo ea module ea Uni-I/O™.
• Lintlha tse sa sebelisoeng ha lia lokela ho kopanngoa (ntle le haeba ho boletsoe ka tsela e 'ngoe). Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
•  Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.

Tlhokomeliso

• Ho qoba ho senya terata, sebelisa torque e kholo ea 0.5 N·m (5 kgf·cm).
• Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
• Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm2 -3.31 mm2).

1. Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
2. Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
3. Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
4. Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.

Lintlha tsa Khokahano ea Uni-I/O™ Module
Litšoantšo tsohle tsa lithapo le litaelo tse tokomaneng ena li bua ka lintlha tsa khokahanyo tsa I/O tsa li-module tse fapaneng. Tsena li hlophisitsoe ka lihlopha tse ’nè tsa lintlha tse supileng se seng le se seng, joalokaha ho bontšitsoe litšoantšong tse ka tlaase.

Litaelo tsa Wiring
Ho etsa bonnete ba hore sesebelisoa se tla sebetsa hantle le ho qoba tšitiso ea motlakase:

• Sebelisa khabinete ea tšepe. Etsa bonnete ba hore khabinete le mamati a eona li entsoe ka mobu hantle.
• Sebelisa lithapo tse boholo bo lekaneng bakeng sa mojaro.
• Tsamaisa lets'oao le leng le le leng la I/O ka terata ea eona e tloaelehileng. Hokela lithapo tse tloaelehileng libakeng tsa tsona tse tloaelehileng (CM) mojuleng oa I/O.
• Ka bomong hokela ntlha e 'ngoe le e' ngoe ea 0V tsamaisong le setsing sa motlakase sa 0V.
• E mong le e mong amahanya ntlha e 'ngoe le e 'ngoe ea lefats'e e sebetsang () le lefats'e la tsamaiso
  (haholo-holo ho chassis ea k'habote ea tšepe). Sebelisa lithapo tse khuts'oane le tse tenya ka ho fetesisa: bolelele bo ka tlase ho 1m (3.3'), botenya bo tlase ke 14 AWG (2 mm2).
• Hokela phepelo ea motlakase 0V lefats'eng la sistimi.

HLOKOMELA: Bakeng sa tlhaiso-leseling e batsi, sheba tokomane ea Tsamaiso ea Wiring Guidelines, e fumanehang Laeboraring ea Tekheniki ho Unitronics' websebaka.

Wiring Inputs: UID-0808R, UID-0808T, UID-1600

UID-0808R
Litholoana li arotsoe ka lihlopha tse peli tse arohaneng:

UID-0808T

• I0-I3 e arolelana CM0 e tloaelehileng
• I4-I7 e arolelana CM1 e tloaelehileng

UID-1600
Litlhahiso li hlophisitsoe ka lihlopha tse 'nè tse ikhethileng:

• I0-I3 e arolelana CM0 e tloaelehileng
• I4-I7 e arolelana CM1 e tloaelehileng
• I8-I11 e arolelana CM2 e tloaelehileng
• I12-I15 e arolelana CM3 e tloaelehileng

Sehlopha se seng le se seng sa ho kenya se ka kenngoa ka lithapo joalo ka sinki kapa mohloli. Kopanya sehlopha ka seng ho latela lipalo tse ka tlase.

HLOKOMELA

• Sebelisa sink input wiring ho hokela sesebelisoa sa sourcing (pnp).
• Sebelisa terata ea mohloli ho hokela sesebelisoa se tebang (npn).

Ho thaepa Litlhahiso tsa UID-0808THS
Litholoana li arotsoe ka lihlopha tse peli tse arohaneng:

• I0-I3 e arolelana CM0 e tloaelehileng
• I4-I7 e arolelana CM1 e tloaelehileng

Sehlopha se seng le se seng se ka ba le mehala e le sink kapa mohloli. Lintho tse kenyang I0, I1, I4, le I5 li ka hlophisoa e le lisebelisoa tse tloaelehileng tsa dijithale kapa e le likenyelletso tsa lebelo le holimo tse ka amohelang matšoao a lebelo le phahameng ho tsoa ho li-sensor kapa li-encoder tsa shaft.

• Lintho tse kenyang I2, I3, I6 le I7 li ka sebetsa feela joalo ka lintho tse tloaelehileng tsa dijithale.

Mekhoa ea ho Kena ka Lebelo le Phahameng
Tse latelang ke likabelo tse fapaneng tsa phini bakeng sa liteishene tse lebelo le holimo:

	Channel 1			Channel 2
	I0	I1		I4	I5
Quadrature	Mohato A	Mohato B		Mohato A	Mohato B
Pulse/Direction	Pulse	Tataiso		Pulse	Tataiso

HLOKOMELA

• Mekhoa ea ho kenya e behiloe ka bobeli ka wiring le software.
• Ha o hokela mehloli ea pulse ntle le lets'oao la tataiso, siea phini ea tataiso e sa hokahanngoa. Hlokomela hore tlhophisong ena, phini ea tataiso e ke ke ea sebelisoa e le mokhoa o tloaelehileng oa ho kenya.

HLOKOMELA

• Sebelisa sink input wiring ho hokela sesebelisoa sa sourcing (pnp).
• Sebelisa terata ea mohloli ho hokela sesebelisoa se tebang (npn).

Lits'ebetso tsa ho fetisoa ha Wiring: UID-0808R, UID-0016R
Phepelo ea motlakase e tsoang
Liphetho tsa relay li hloka matla a kantle a 24VDC. Hokela liteishene tsa 24V le 0V joalo ka ha ho bontšitsoe setšoantšong se ka tlase.

• Ho qoba kotsi ea mollo kapa tšenyo ea thepa, kamehla sebelisa mohloli o lekanyelitsoeng oa hona joale kapa hokela sesebelisoa sa hona joale se fokotsang letoto le likhokahano tsa relay.
• 0V ea mojule e tlameha ho hokela ho 0V ea Phanele ea HMI. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
• Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela module ho phepelo ea motlakase e laoloang.

UID-0808R

Litholoana li arotsoe ka lihlopha tse peli tse ikhethileng:

• O0-O3 e arolelana CM2 e tloaelehileng
• O4-O7 e arolelana CM3 e tloaelehileng

UID-0016R
Liphetho li hlophisitsoe ka lihlopha tse 'ne tse ikhethileng:

• O0-O3 e arolelana CM0 e tloaelehileng
• O4-O7 e arolelana CM1 e tloaelehileng
• O8-O11 e arolelana CM2 e tloaelehileng
• O12-O15 e arolelana CM3 e tloaelehileng

Kopanya sehlopha ka seng ho latela setšoantšo se tsamaeang le sehlooho.

Ho eketsa nako ea bophelo ba ho kopana
Ho eketsa nako ea bophelo ba mabitso a li-relay le ho sireletsa mojule ts'enyong e ka bang teng ka ho khutlisa EMF, hokela:

• le clamping diode ka ho tsamaisana le mojaro o mong le o mong oa inductive oa DC.
• potoloho ea snubber ea RC e tsamaisanang le mojaro o mong le o mong oa inductive oa AC.

Liphetho tsa Wiring Transistor: UID-0808T, UID-0016T
Phepelo ea motlakase e tsoang
Tšebeliso ea leha e le efe ea liphetho e hloka phepelo ea motlakase ea kantle ea 24VDC joalo ka ha ho bonts'itsoe setšoantšong se tsamaeang le sena.

• Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.

Litholoana
Hokela liteishene tsa 24V le 0V joalo ka ha ho bontšitsoe setšoantšong se tsamaeang le sena.

UID-0808T
O0-O7 e arolelane le phaello e tloaelehileng 0V

UID-0016T
O0-O15 e arolelane le phaello e tloaelehileng 0V

Wiring the Outputs UID-0808THS Output phepelo ea motlakase 

• Tšebeliso ea efe kapa efe ea liphetho e hloka phepelo ea motlakase ea kantle ea 24VDC joalo ka setšoantšong se tsamaeang le sena.
• Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.

Litholoana 

• Hokela sesebediswa sa sethibelo sa hajoale ka letoto le nang le dipoelo tsa O0 le O1. Litholoana tsa O2 ho ea ho O7 li sirelelitsoe ka nako e khuts'oane.
• Liphetho tsa O0 le O1 li ka hlophisoa hore e be liphetho tse tloaelehileng tsa dijithale kapa e le liphetho tsa PWM tsa lebelo le holimo.
• Liphetho tsa O4 le O5 li ka hlophisoa hore e be liphetho tse tloaelehileng tsa dijithale kapa e le liphetho tse tloaelehileng tsa PWM.

Sheba leqephe la lintlha bakeng sa lintlha tse qaqileng mabapi le mefuta ea tlhahiso ea PWM.

• Liphetho tsa O2, O3, O6 le O7 li ka sebetsa feela joalo ka liphetho tse tloaelehileng tsa dijithale.
• Tse latelang ke likabelo tse fapaneng tsa phini bakeng sa liteishene tsa PWM:

	Channel 1			Channel 2
	O0	O1		O4	O5
PWM, tlhahiso e le 'ngoe	PWM	Tloaelehileng Digital		PWM	Tloaelehileng Digital
PWM, liphetho tse peli	PWM	PWM		PWM	PWM

Liphello tsa PWM tse phahameng
Sebelisa thapo e sirelelitsoeng bakeng sa wiring O0 kapa O1 ha li setiloe hore li sebetse e le liphetho tsa High Speed ​​PWM.

Tlhokomeliso 

• Haeba Outputs O0 le O1 li tla sebetsa joalo ka lipoelo tsa lebelo le holimo, li hokahanye u sebelisa CM2. Se ke oa hokela CM2 ho sistimi ea 0V.

Boholo

Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng. Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena. Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona

Uni-I/O™ ke lelapa la li-module tsa Input/Output tse tsamaellanang le sethala sa taolo sa UniStream™.
Tataiso ena e fana ka lintlha tsa mantlha tsa ho kenya li-module tsa UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, le UID-0016T. Litlhaloso tsa tekheniki li ka khoasolloa ho Unitronics websebaka. Sethala sa UniStream ™ se na le balaoli ba CPU, liphanele tsa HMI, le li-module tsa I/O tsa lehae tse kopanang ho theha All-in-one Programmable Logic Controller (PLC).

Kenya likarolo tsa Uni-I/O™: 

• Ka morao ho UniStream™ HMI Panel efe kapa efe e nang le CPU-for-Panel.
• Ho kena seporong sa DIN, u sebelisa Setsi sa Katoloso ea Sebaka.

Palo e kholo ea li-module tsa Uni-I/O™ tse ka hokahantsoeng ho molaoli a le mong oa CPU e lekantsoe. Bakeng sa lintlha, ka kopo sheba maqephe a boletsoeng a UniStream™ CPU kapa leha e le efe ea lisebelisoa tsa Katoloso ea Lehae.