unitronics SM35-J-RA22 3.5 Inch Programmable Logic Controller Guide
Tlhaloso e Akaretsang
Balaoli bohle ba koahetsoeng ka tataiso ena ke li-micro-PLC + HMI, li-control tsa logic tse ka khonehang tse nang le liphanele tse sebetsang tse hahiloeng le li-I/O tse holim'a board.
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 |
| Ka sekepeng I/O | E itšetlehileng ka Mohlala | ||
| Skrine | 3.5 ″ Colour Touch | 4.3 ″ Colour Touch | 7 ″ Colour Touch |
| Keypad kapa Linotlolo tsa Mosebetsi | Ha ho letho | ||
| Programming Com Port, E hahiloeng | |||
| RS232 | Ee | Ha ho letho | Ha ho letho |
| Sesebelisoa sa USB, mini-B | Ha ho letho | Ee | Ee |
| Com Ports, tatellano e arohaneng, e kentsoe ke mosebelisi | Mosebedisi a ka kenya mojule wa CANbus (V100-17-CAN), le ngoe ho tse latelang:· RS232/RS485 port (V100-17-RS4/V100-17-RS4X)· Ethernet (V100-17-ET2) | ||
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 |
| Molaoli | Ee | ||
| Li-Terminal Blocks | Ee | ||
| Betri | Ee (e kentsoe) | Ee (e kentsoe) | Ee |
| Li-brackets tse ntseng li eketseha | Ee (likarolo tse 2) | Ee (likarolo tse 4) | Ee (likarolo tse 6) |
| Rubber Tiiso | Ee | ||
| Matshwao a Tlhokomediso le Dithibelo tse Akaretsang | |||
| Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko. | |||
| Letšoao | Tlhaloso | Tlhaloso | |
| Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. | ||
| Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. | ||
| Tlhokomeliso | Tlhokomeliso | E-ba hlokolosi. | |
| § Pele a sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena.§ Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples.§ Ka kopo, lahla sehlahisoa sena ho latela litekanyetso le melaoana ea lehae le ea naha. | |||
| Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa. | |||
| § Se ke oa leka ho sebelisa sesebelisoa sena se nang le li-parameter tse fetang maemo a lumelletsoeng. | |||
| Mehopolo ea Tikoloho | |||
| § Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho sisinyeha ho feteletseng, ho latela litekanyetso tse fanoeng letlapeng la lintlha tsa tekheniki tsa sehlahisoa.§ Se ke oa beha metsi kapa ho tlohella metsi a lutlele holim'a yuniti.§ Se lumelle lithōle ho oela ka har'a yuniti nakong ea ho kenya. | |||
| § Ho kenya moea: 10mm sebaka se hlokehang lipakeng tsa moeli o kaholimo/ka tlase le mabota a koetsoeng.taglithapo tsa e le lisebelisoa tsa motlakase. | |||
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL. Mehlala e latelang: V130-33-R34, V130-J-R34, V130-T4-ZK1, V350-35-RA22, V350-J-RA22, V350-35-R34, V350-J-R34, V430-J- R34, SM35-J-T20, SM43-J-T20 ke UL e thathamisitsoeng bakeng sa Libaka tse Kotsi. Mehlala e latelang: V130-33-B1, V130-J-B1, V130-33-TA24, V130-J-TA24, V130-33-T38, V130-JT38 V130-33-TR20, V130-J-TR20, V130 -33-TR34, V130-J-TR34, V130-33-RA22, V130-J-RA22, V130-33-TRA22, V130-J-TRA22, V130-33-T2, V130-J-T2, V130-33 -TR6, V130-J-TR6, V130-33-R34, V350-35-B1, V130-T4-ZK1, V350-J-B1, V350-35-TA24, V350-J-TA24, V350-35-T38 , V350-J-T38, V350-35-TR20, V350-J-TR20, V350-35-TR34, V350-J-TR34, V350-35-TRA22, V350-J-TRA22, V350-35-T2, V350 -J-T2, V350-35-TR6, V350-J-TR6, V350-S-TA24, V350-JS-TA24, V350-35-RA22, V350-J-RA22, V350-35-R34, V430-J -B1, V430-J-TA24, V430-J-T38, V430-J-R34, V430-J-RH2, V430-J-TR34, V430-J-RA22, V430-J-TRA22, V430-J-T2 , V430-J-RH6, SM35-J-D4, SM35-J-R20 SM35-J-RA22, SM35-J-TA22, SM43-J-R20, SM43-J-RA22, SM43-J-TA22, SM35- J-T20, SM43-J-T20 SM70-J-R20, SM70-J-RA22, SM70-J-T20, SM70-J-T38, SM70-J-TA22, SM70-J-TRA22 ke UL e thathamisitsoeng bakeng sa Sebaka se Tloaelehileng .
Bakeng sa mehlala ho tsoa letotong la V130, V130-J, V430, e kenyelletsang "T4" kapa "J4" ka lebitso la Mohlala, E loketse ho beoa holim'a sebaka se bataletseng sa mofuta oa 4X o koetsoeng. Bakeng sa mohlalaamples: V130-T4-R34, V130-J4-R34, V430-J4-T2, SM43-J4-R20
UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
| Tlhokomeliso | Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela. | ||
 |
§ Wiring ea ho kenya le ho tsoa e tlameha ho lumellana le Sehlopha sa I, mekhoa ea terata ea Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola. | ||
 |
§ TLHOKOMELISO—Kotsi ea Ho phatloha—ho fapanyetsana ha likarolo ho ka ’na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2. § TEMOSO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla thepa ntle le haeba motlakase o tingoa kapa sebaka seo ho tsejoa hore ha se kotsi.§ TEMOSO - Ho pepesehela lik'hemik'hale tse ling ho ka 'na ha theola thepa ea ho tiisa ea thepa e sebelisoang ho Li-Relays.§ Thepa ena e tlameha ho kenngoa ho sebelisoa mekhoa ea lithapo e hlokahalang bakeng sa Sehlopha sa I, Karolo ea 2 ho latela NEC le/kapa CEC. |
Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang tse ka beoang le holim'a phanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X. Relay Output Resistance Ratings Lihlahisoa tse thathamisitsoeng ka tlase li na le lihlahisoa tsa li-relay: Balaoli ba lokiselitsoeng, Mehlala: V430-J-R34, V130-33-R34, V130-J-R34 le V350-35-R34, V350-J-R34
- Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe ho 3A res.
- Ntle le mehlala ea V430-J-R34, V130-33-R34, V130-J-R34,
V130-T4-ZK1 le V350-35-R34, V350-J-R34, ha lihlahisoa tsena tse ikhethileng li sebelisoa maemong a sa tsitsang a tikoloho, li lekantsoe ho 5A res, joalo ka ha li hlalosoa ka sebopeho sa sehlahisoa.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li na le boema-kepe ba puisano ba USB, sekotjana sa karete ea SD, kapa ka bobeli, ha se sekotjana sa karete ea SD kapa boema-kepe ba USB ha lia rereloa ho hokela ruri, ha boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi. Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.
Litekanyo
Ho phahamisa Panel
Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm. Mefuta e thathamisitsoeng ea UL: Ho kopana le maemo a UL508, beha sesebelisoa sebakeng se bataletseng sa sebaka sa mofuta oa 1.
- Etsa phanele e sehiloeng ka boholo bo loketseng:
- SM35: 92x92mm (3.622”x3.622”).
- SM43: 122.5×91.5mm (4.82”x3.6”).
- SM70: 193x125mm (7.59”x4.92”).
- Tsamaisa selaoli sebakeng se sehiloeng, ho etsa bonnete ba hore tiiso ea rabara e teng.
- Sututsa li-brackets tse ntseng li phahama ka har'a li-slots tsa tsona mahlakoreng a phanele joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
- Tiisa li-screws tsa bracket khahlanong le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw. Torque e hlokahalang ke 0.35 N·m (3.1 in-lb).
- Ha e kentsoe ka nepo, selaoli se behoa ka ho lekana ka har'a phanele e sehiloeng joalokaha ho bontšitsoe litšoantšong tse tsamaeang le sehlooho sena.
Wiring
- U se ke ua tšoara lithapo tse phelang.
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
- Sebelisa lisebelisoa tse nepahetseng tsa tšireletso ea potoloho.
- Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
Tlhokomeliso
- Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·cm).
- Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata e 3.31 mm² –0.13 mm² (12-26 AWG):
- Hlōla terata ho bolelele ba 7±0.5mm (0.270–0.300“).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
- Lithapo tse kenyang kapa tse tsoang ha lia lokela ho tsamaisoa ka thapo e tšoanang ea li-multi-core kapa ho arolelana terata e tšoanang.
- Lumella voltagtšitiso ea ho theola le lerata le mela ea I/O e sebelisitsoeng sebaka se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
- Molaoli le matšoao a I / O a tlameha ho hokahana le lets'oao le tšoanang la 0V.
Ke / Os
SM35/43/70-J-RA22 e na le kakaretso ea lintlha tse 12 le li-relay tse 8 le liphetho tse 2 tsa analoge. Ts'ebetso ea ho kenya letsoho e ka fetoloa ka tsela e latelang: Litlhahiso tse 12 li ka sebelisoa e le lisebelisoa tsa digital. Li ka ba tsa khoele, ka sehlopha, 'me tsa hlophisoa ho npn kapa pnp ka jumper e le 'ngoe. Ntle le moo, ho latela litlhophiso tsa jumper le wiring e nepahetseng:
- Litlhahiso tsa 5 le 6 li ka sebetsa e le lintho tsa digital kapa tsa analoge.
- Input 0 e ka sebetsa joalo ka khaontara ea lebelo le holimo, joalo ka karolo ea "shaft-encoder" kapa joalo ka mokhoa o tloaelehileng oa ho kenya.
- Input 1 e ka sebetsa joalo ka ha counter reset, e le karolo ea shaft-encoder, kapa joalo ka mokhoa o tloaelehileng oa ho kenya.
- Haeba input 0 e setilwe jwalo ka dibadi tsa lebelo le phahameng (ntle le ho seta botjha), input 1 e ka sebetsa jwalo ka mokgwa o tlwaelehileng wa ho kenya dijithale.
- Lintho tse kenyang 7-8 le 9-10 li ka sebetsa e le lisebelisoa tsa digital, thermocouple, kapa PT100; Input 11 e ka sebetsa joalo ka lets'oao la CM bakeng sa PT100.
Kenya Litlhophiso tsa Jumper
Litafole tse ka tlase li bonts'a mokhoa oa ho seta jumper e itseng ho fetola ts'ebetso ea ho kenya. Ho fihlella li-jumpers tsa I/O, o tlameha ho bula molaoli ho latela litaelo ho
- Litlhophiso tsa jumper tse sa lumellaneng le likhokahano tsa likhoele li ka senya molaoli haholo.
| Litlhahiso tsa Dijithale 0-11: Seta Mofuta | |||
| Beha ho | JP12 (Litlhahiso tsohle) | ||
| npn (sink) | A | ||
| pnp (mohloli)* | B | ||
| Litlhahiso 7/8: Seta Mofuta - Digital kapa RTD/TC #1 | |||
| Beha ho | JP1 | JP2 | JP3 |
| Dijithale* | A | A | A |
| Thermocouple | B | B | B |
| PT100 | B | A | B |
| Litlhahiso 9/10: Seta Mofuta - Digital kapa RTD/TC #0 | |||
| Beha ho | JP5 | JP6 | JP7 |
| Dijithale* | A | A | A |
| Thermocouple | B | B | B |
| PT100 | B | A | B |
| Kenyelletso ea 11: Seta Mofuta - Digital kapa CM bakeng sa PT100 | |||
| Beha ho | JP11 | ||
| Dijithale* | A | ||
| CM bakeng sa PT100 | B | ||
| Kenyelletso ea 5: Seta Mofuta - Digital kapa Analog #3 | |||
| Beha ho | JP4 | JP10 | |
| Dijithale* | A | A | |
| Moqtage | B | A | |
| Hona joale | B | B | |
| Kenyelletso ea 6: Seta Mofuta - Digital kapa Analog #2 | |||
| Beha ho | JP8 | JP9 | |
| Dijithale* | A | A | |
| Moqtage | B | A | |
| Hona joale | B | B | |
| Analog Output 0: Beha ho Moqtage / Hona joale | ||
| Beha ho | JP13 | |
| Moqtage* | A | |
| Hona joale | B | |
| Analog Output 1: Beha ho Moqtage / Hona joale | ||
| Beha ho | JP14 | |
| Moqtage* | A | |
| Hona joale | B | |
I/O Wiring
Keletso ea Analog
- Lithebe li lokela ho hokeloa mohloling oa lets'oao.
- Letšoao la 0V la ho kenya analoge le tlameha ho hokahanngoa le 0V ea molaoli.
Thermocouple
- Thermocouple 0: sebelisa Input 9 e le negative input le 10 e le positive.
- Thermocouple 1: sebelisa Input 7 e le negative input le 8 e le positive.
| Mofuta | Temp. Range | Mobala oa Mohala | |
| ANSI (USA) | BS1843 (UK) | ||
| mV | -5 ho isa ho 56mV | ||
| B | 200 ho isa 1820˚C(300 ho 3276˚F) | +Boputsoa-Bokhubelu | +Ha ho na-Putsoa |
| E | -200 ho 750˚C(-328 ho 1382˚F) | +Violet-Red | +Bosootho-Boputsoa |
| J | -200 ho 760˚C(-328 ho 1400˚F) | + Bosoeu-Bokhubelu | +Boputsoa-bosehla |
| K | -200 ho 1250˚C(-328 ho 2282˚F) | +Yellow-Red | +Bosootho-Boputsoa |
| N | -200 ho 1300˚C(-328 ho 2372˚F) | +Namune-Khubelu | +Namune-Putsoa |
| R | 0 ho isa 1768˚C(32 ho 3214˚F) | +Botšo-Bokhubelu | + Bosoeu-Boputsoa |
| S | 0 ho isa 1768˚C(32 ho 3214˚F) | +Botšo-Bokhubelu | + Bosoeu-Boputsoa |
| T | -200 ho 400˚C(-328 ho 752˚F) | +Boputsoa-Bokhubelu | + Bosoeu-Boputsoa |
RTD
- PT100 (Sensor 0): sebelisa Input 9 le 10, e amanang le lets'oao la CM.
- PT100 (Sensor 1): sebelisa Input 7 le 8, e amanang le lets'oao la CM.
- 4 terata PT100 e ka sebelisoa ka ho siea e 'ngoe ea li-sensor e sa kopanngoa.
E eketsa Nako ea Bophelo ba ho Kopana Ho eketsa nako ea bophelo ea mabitso a tsoang ho relay le ho sireletsa sesebelisoa ts'enyong e ka bang teng ka ho khutlisa EMF, hokela:
- A clamping diode ka ho tsamaisana le mojaro o mong le o mong oa inductive oa DC
- Potoloho ea snubber ea RC e tsamaisanang le mojaro o mong le o mong oa AC
Phepelo ea motlakase
Molaoli o hloka motlakase oa kantle oa 24VDC.
- Motlakase o tlameha ho kenyelletsa ho pata habeli. Lintho tse hlahisoang li tlameha ho behoa joalo ka SELV/PELV/Class2/Limited Power.
- Sebelisa lithapo tse arohaneng ho hokahanya mohala oa lefats'e o sebetsang (pin 3) le mohala oa 0V (pin 2) ho sistimi ea lefats'e.
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
- Se ke oa hokela lets'oao la 'Neutral' kapa 'Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang
Ho hlahisa PLC+HMI
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka:
- Ho kenya molaoli holim'a phanele ea tšepe.
- Hokela khokahano e 'ngoe le e' ngoe e tloaelehileng le ea fatše ka kotloloho mobung oa sistimi ea hau.
- Bakeng sa lithapo tsa fatše ho sebelisoa terata e khutšoanyane le e teteaneng ka ho fetisisa.
Boema-kepe ba Khokahano
- Tima motlakase pele o etsa likhokahano tsa likhokahano.
Tlhokomeliso - Kamehla sebelisa li-adapter tse loketseng tsa koung.
Pinouts
Li-pinouts tse ka tlase li bonts'a matšoao a boema-kepe ba PLC.
| RS232 | |
| Pin # | Tlhaloso |
| 1 | Ha e kopane |
| 2 | Tlhaloso ea 0V |
| 3 | Letšoao la TXD |
| 4 | Letšoao la RXD |
| 5 | Tlhaloso ea 0V |
| 6 | Ha e kopane |
Ho bula Molaoli
- Pele o etsa liketso tsena, ama ntho e theiloeng fatše ho ntša tefiso efe kapa efe ea electrostatic.
- Qoba ho ama letlapa la PCB ka kotloloho. Tšoara boto ea PCB ka lihokelo tsa eona.
- Tima motlakase, o hakolle, 'me o theole selaoli.
- Sekoahelo se ka morao sa molaoli se na le li-screw tse 4, tse likhutlong. Tlosa li-screws, 'me u hule sekoahelo se ka morao.
Ho fetola Litlhophiso tsa I/O
Boto ea I / O ea molaoli e se e pepesitsoe, e u nolofalletsang ho fetola litlhophiso tsa I / O (mojule e itšetlehileng ka eona) ho ea ka li-jumpers tse ka holimo.
Hlokomela: Senepe ke sa papiso feela. (E sebelisa SM70)
Ho koala Molaoli
Tlosa sekoahelo se ka morao sa molaoli 'me u fate li-screws tsa sekhutlo. Hlokomela hore o tlameha ho khutlisa sekoaelo se ka morao ka mokhoa o sireletsehileng pele o matlafatsa selaoli.
| Samba™PLC+HMI | SM35-J-RA22 SM43-J-RA22 SM70-J-RA22Litlhaloso tsa Tekheniki | |||
| Phepelo ea motlakase | ||||
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 | |
| Keletso voltage | 24VDC | |||
| Sebaka se lumelletsoeng | 20.4VDC ho 28.8VDC e nang le ripple e ka tlase ho 10%. | |||
| Max. tshebediso ya jwale | Sheba Ntlha ea 1 | |||
| lintlha tsa npn | 275mA @ 24VDC | 275mA @ 24VDC | 330mA @ 24VDC | |
| lintlha tsa pnp | 235mA @ 24VDC | 235mA @ 24VDC | 295mA @ 24VDC | |
| Lintlha: | ||||
| 1. Ho bala matla a sebele a sebelisoang, tlosa hona joale bakeng sa ntho e 'ngoe le e 'ngoe e sa sebelisoang ho tloha ho palo e phahameng ka ho fetisisa ea tšebeliso ea hona joale ho latela litekanyetso tse ka tlase: | ||||
| Backlight | Karete ea Ethernet | Relay Outputs (ka tlhahiso) | All Analog Outputs, voltage/hona joale | |
| SM35 / SM43 | 20mA | 35mA | 5mA | 48mA/30mA* |
| SM70 | 80mA | 35mA | 5mA | 48mA/30mA* |
| * Haeba liphetho tsa analog li sa hlophisoa, joale tlosa boleng bo holimo. | ||||
Lisebelisoa tsa Dijithale
- Palo ea lintho tse kenang 12. Sheba Ntlha ea 2
- Mofuta oa ho kenya Sheba Ntlha ea 2
- Galvanic ho itšehla thajana Ha ho letho
- Nominal input voltag24VDC
- Keletso voltage
- pnp (mohloli) 0-5VDC bakeng sa Logic '0' 17-28.8VDC bakeng sa Logic '1'
- npn (sink) 17-28.8VDC bakeng sa Logic '0' 0-5VDC bakeng sa Logic '1'
- Kenya 3.7mA@24VDC ea hajoale
- Kenyelletso ea 6.5KΩ
- Nako ea ho arabela 10ms e tloaelehileng, ha e sebelisoa e le lisebelisoa tse tloaelehileng tsa digital
- Kenya bolelele ba cable
- Kenyelletso e tloaelehileng ea dijithale Ho fihlela ho limithara tse 100
- Ho Kena ka Lebelo le Phahameng Ho fihlela ho limithara tse 50, ho sirelelitsoe, bona tafole ea Frequency ka tlase
| Bolelele ba thapo (max.) | HSC | Shaft-encoder pnp | Shaft-encoder npn |
| 10m | 30kHz | 20kHz | 16kHz |
| 25m | 25kHz | 12kHz | 10kHz |
| 50m | 15kHz | 7kHz | 5kHz |
| Lintlha: | ||||
| 2. Mohlala ona o na le kakaretso ea lisebelisoa tse 12. Lintho tsohle tse 12 li ka sebelisoa e le lisebelisoa tsa digital. Li ka 'na tsa kengoa ka lithapo ka sehlopha ka jumper e le' ngoe e le npn kapa pnp. Ho feta moo, ho latela litlhophiso tsa jumper le lithapo tse loketseng:- Inputs 5 le 6 e ka sebetsa joalo ka lisebelisoa tsa digital kapa analog.- Input 0 e ka sebetsa joalo ka holimo. -speed counter, e le karolo ea shaft-encoder, kapa e le lisebelisoa tse tloaelehileng tsa digital.- Input 1 e ka sebetsa e le counter reset, normal input ea digital, kapa e le karolo ea shaft-encoder.- Haeba input 0 e behiloe e le holimo -speed counter (ntle le ho tsosolosa), ho kenya 1 ho ka sebetsa e le mokhoa o tloaelehileng oa digital.- Inputs 7-8 le 9-10 e ka sebetsa e le lisebelisoa tsa digital, thermocouple, kapa PT100; input 11 e ka boela ea sebetsa e le letšoao la CM bakeng sa PT100. 3. pnp/npn boholo ba maqhubu a ho 24VDC. | ||||
| Lisebelisoa tsa Analog | ||||
| Palo ea lisebelisoa | 2, ho latela wiring joalo ka ha ho hlalositsoe kaholimo ho Note 2 | |||
| Mofuta oa ho kenya | Lisebelisoa tsa mefuta e mengata: 0-10V, 0-20mA, 4-20mA | |||
| Input mefuta e fapaneng | 0-20mA, 4-20mA | 0-10VDC | ||
| Kenyelletso ea ho kenya | 37Ω | 12.77kΩ | ||
| Lintlha tse ngata tse kentsoeng | 30mA, 1.1V | ± 15V | ||
| Ho itšehla thajana ka Galvanic | Ha ho letho | |||
| Mokhoa oa ho sokolla | Moqtage ho khafetsa | |||
| Mokhoa o tloaelehileng | ||||
| Qeto, ntle le 4-20mA | 14-bit (16384 diyuniti) | |||
| Qeto, ho 4-20mA | 3277 ho isa ho 16383 (likarolo tse 13107) | |||
| Nako ea ho sokoloha | 100ms bonyane mocha ka mong. Sheba Ntlha ea 4. | |||
| Mokhoa o potlakileng | ||||
| Qeto, ntle le 4-20mA | 12-bit (4096 diyuniti) | |||
| Qeto, ho 4-20mA | 819 ho isa ho 4095 (likarolo tse 3277) | |||
| Nako ea ho sokoloha | 30ms bonyane mocha ka mong. Sheba Ntlha ea 4. | |||
| Ho nepahala | ±0.44% | |||
| Pontsho ya boemo | Ee. Sheba Ntlha ea 5 | |||
| Lintlha: | ||||
| 4. Linako tsa phetoho lia bokellana 'me li itšetlehile ka palo eohle ea lisebelisoa tsa analoge tse hlophisitsoeng.ample, haeba e le 'ngoe feela ea ho kenya analog (mokhoa o potlakileng) o lokiselitsoe, nako ea phetoho e tla ba 30ms; leha ho le joalo, haeba li-analog tse peli (mokhoa o tloaelehileng) le lisebelisoa tse peli tsa RTD li lokisoa, nako ea phetoho e tla ba 100ms + 100ms + 300ms+ 300ms = 800ms. | ||||
| 5. Theko ea analoge e ka bontša liphoso joalokaha ho bontšitsoe ka tlase: | ||||
| Boleng: 12-bit | Boleng: 14-bit | Lebaka le ka khonehang | ||
| -1 | -1 | E kheloha hanyane ka tlase ho sebaka sa tlhahiso | ||
| 4096 | 16384 | E kheloha hanyenyane ka holim'a mefuta e kenang | ||
| 32767 | 32767 | E kheloha haholo ka holimo kapa ka tlase ho mefuta ea tlhahiso | ||
| Lisebelisoa tsa RTD | ||||
| Mofuta oa RTD | PT100 | |||
| Mocheso coefficient a | 0.00385/0.00392 | |||
| Input mefuta e fapaneng | -200 ho 600°C/-328 ho 1100°F. 1 ho isa ho 320Ω. | |||
| Ho behwa ka thoko | Ha ho letho | |||
| Mokhoa oa ho sokolla | Moqtage ho khafetsa | |||
| Qeto | 0.1°C/0.1°F | |||
| Nako ea ho sokoloha | 300ms bonyane mocha ka mong. Sheba Ntlha ea 4 ka holimo | |||
| Kenyelletso ea ho kenya | >10MΩ | |||
| Boleng | Lebaka le ka khonehang | ||
| 32767 | Sensor ha e ea hokela ho kenyo, kapa boleng bo feta sebaka se lumelletsoeng | ||
| -32767 | Sensor e khutsufalitsoe |
Lisebelisoa tsa Thermocouple
Input mefuta e fapaneng Sheba Ntlha ea 7
Ho behwa ka thoko Ha ho letho
Mokhoa oa ho sokolla Moqtage ho khafetsa
Qeto 0.1C/ 0.1F boholo
Nako ea ho sokoloha 100ms bonyane mocha ka mong. Sheba Ntlha ea 7 ka holimo
Kenyelletso ea ho kenya >10MΩ
Matšeliso a mateano a batang Local, automatic
Phoso ea puseletso ea mateano a batang ±1.5C/±2.7F boholo
Feletseng palo e kahodimodimo ± 0.6VDC
Ho nepahala ±0.44%
Nako ea ho futhumatsa ½ hora ka tlwaelo, ±1C/±1.8F phetapheto
Pontsho ya boemo Ee. Sheba Ntlha ea 6 ka holimo
Lintlha:
Sesebelisoa se ka boela sa lekanya voltage ka har'a mefuta e fapaneng ea -5 ho 56mV, ka qeto ea 0.01mV. Sesebelisoa se ka boela sa lekanya maqhubu a boleng bo tala ka qeto ea 14-bits (16384). Mekhahlelo ea lintho tse kentsoeng e bontšitsoe lethathamong le latelang:
| Mofuta | Temp. Range | Mofuta | Temp. Range | |
| mV | -5 ho isa ho 56mV | N | -200 ho 1300˚C (-328 ho 2372˚F) | |
| B | 200 ho isa ho 1820˚C (300 ho isa ho 3276˚F) | R | 0 ho isa ho 1768˚C (32 ho isa ho 3214˚F) | |
| E | -200 ho 750˚C (-328 ho 1382˚F) | S | 0 ho isa ho 1768˚C (32 ho isa ho 3214˚F) | |
| J | -200 ho 760˚C (-328 ho 1400˚F) | T | -200 ho 400˚C (-328 ho 752˚F) | |
| K | -200 ho 1250˚C (-328 ho 2282˚F) |
Digital Outputs
Palo ea liphetho 8 relay (ka lihlopha tse 2). Sheba Ntlha ea 8
Mofuta oa tlhahiso SPST-NO (Foromo A)
Ho behwa ka thoko Ka ho fetisa
Mofuta oa relay Tyco PCN-124D3MHZ kapa e lumellana
Sephetho sa hajoale (resistive load) Palo e phahameng ka ho fetisisa 8A palo e kholo ka ho fetisisa e tloaelehileng
E lekantsoeng voltage 250VAC / 30VDC
Moroalo o fokolang 1mA, 5VDC
Tebello ya bophelo 100k ts'ebetso ka bongata bo boholo
Nako ea ho arabela 10ms (tloaelehileng)
Contact tšireletso Litlhokomelo tsa ka ntle lia hlokahala (sheba Keketseho ea Bophelo ba Nako ea ho Kopana le Sehlahisoa Tataisong ea ho Kenyeletsoa)
| Liphetho tsa Analog | |
| Palo ea liphetho | 2 |
| Melemo ea tlhahiso | 0-10V, 4-20mA. Sheba Ntlha ea 9 |
| Qeto | 12-bit (4096 diyuniti) |
| Nako ea ho sokoloha | Liphetho ka bobeli lia ntlafatsoa ho latela scan |
| Loaro impedance | 1kΩ bonyane—voltage500Ω boholo-hona joale |
| Ho itšehla thajana ka Galvanic | Ha ho letho |
| Ho nepahala | ±0.3% |
| Lintlha: | |
| 9. Hlokomela hore boholo ba I/O ka 'ngoe bo hlalosoa ka wiring, litlhophiso tsa jumper, le ka har'a software ea molaoli. | |
| Pontšo ea Graphic Skrine | |||
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 |
| Mofuta oa LCD | TFT, pontšo ea LCD | TFT, pontšo ea LCD | TFT, pontšo ea LCD |
| Lebone la morao la khanya | LED e tšoeu | LED e tšoeu | LED e tšoeu |
| Qeto ea pontšo | 320x240 pixels | 480x272 pixels | 800x480 pixels |
| Viewsebaka | 3.5″ | 4.3″ | 7″ |
| Mebala | 65,536 (16-bit) | 65,536 (16-bit) | 65,536 (16-bit) |
| Skrine se thetsoang | Ho hanyetsa, analogue | Ho hanyetsa, analogue | Ho hanyetsa, analogue |
| Taolo ea khanya ea skrine | Ka software (Boleng ba polokelo ho SI 9, boleng bo fapana: 0 ho isa ho 100%) | ||
| Keypad ea Virtual | E hlahisa keyboard ea sebele ha sesebelisoa se hloka ho kenngoa ha data. | ||
| Lenaneo | ||||
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 | |
| Boholo ba memori | ||||
| Mokhoa oa ho Sebelisa | 80K | 192K | 192K | |
| Litšoantšo | 1.5M | 3M | 8M | |
| Mehala | 320K | 320K | 512K | |
| Mofuta oa operand | Bongata | Letšoao | Boleng | |
| Likotoana tsa memori | 512 | MB | Bit (khola) | |
| Lintlha tsa Memori | 256 | MI | 16-bit e saennoe/e sa saena | |
| Linomoro tse telele | 32 | ML | 32-bit e saennoe/e sa saena | |
| Mantsoe a Habeli | 32 | DW | 32-bit e sa saenneng | |
| Mehopolo E phaphamala | 24 | MF | 32-bit e saennoe/e sa saena | |
| Li-Bits tse potlakileng | 64 | XB | Fast Bits (coil) - ha e bolokehe | |
| Li-integer tse potlakileng | 32 | XI | 16 bit e saennoe / e sa saena (ka potlako, ha e bolokehe) | |
| Li-integers tse telele tse potlakileng | 16 | XL | 32 bit e saennoe / e sa saena (ka potlako, ha e bolokehe) | |
| Fast Double Word | 16 | XDW | 32 bit e sa ngolisoang (ka potlako, ha e bolokehe) | |
| Lisebelisoa tsa nako | 32 | T | Res. 10 ms; max 99h, 59 mets, 59.99s | |
| Libali | 16 | C | 32-bit | |
| Litafole tsa Lintlha | Lintlha tse matla tsa 32K (litekanyetso tsa diresepe, litlaleho tsa boitsebiso, joalo-joalo) 16K data e tsitsitseng (boitsebiso ba ho bala feela, mabitso a motsoako, joalo-joalo) | |||
| Lipontšo tsa HMI | Ho fihlela ho 24 | |||
| Nako ea ho hlahloba lenaneo | 15µs ka 1kb ea ts'ebeliso e tloaelehileng | |||
| Li-Ports tsa puisano | |
| Boema-kepe ba 1 | 1 channel, RS232 (SM35) , sesebelisoa sa USB (SM43/SM70) |
| Ho itšehla thajana ka Galvanic | SM35 le SM43 - Che SM70 - E |
| Sekhahla sa Baud | 300 ho isa ho 115200 bps |
| RS232 (SM35 feela) | |
| Keletso voltage | ± 20VDC ka ho feletseng |
| Bolelele ba thapo | 15m boholo (50') |
| Sesebelisoa sa USB (SM43,SM70 feela) | |
| Mofuta oa boema-kepe | Mini-B |
| Tlhaloso | USB 2.0 tletlebo; lebelo le tletseng |
| Cable | USB 2.0 tletlebo; ho fihlela ho 3m |
| Boema-kepe ba 2 (boikhethelo) | Sheba Ntlha ea 10 |
| CANbus (boikhethelo) | Sheba Ntlha ea 10 |
| Tse fapaneng | |
| Oache (RTC) | Mesebetsi ea oache ea nako ea 'nete (letsatsi le nako) |
| Backup ea betri | Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng |
| Phetoho ea betri | Ee. Coin-mofuta oa 3V, betri ea lithium, CR2450 |
| Litekanyo | |||
| Ntho | SM35-J-RA22 | SM43-J-RA22 | SM70-J-RA22 |
| Boholo | 109 x 114.1 x 68mm(4.29 x 4.49 x 2.67”).Sheba Ntlha ea 11 | 136 x 105.1 x 61.3mm(5.35 x 4.13 x 2.41”).Sheba Ntlha ea 11 | 210 x 146.4 x 42.3mm(8.26 x 5.76 x 1.66”).Sheba Ntlha ea 11 |
| Boima ba 'mele | 226g (7.97 oz) | 365g (12.87 oz) | 654g (23.07 oz) |
| Tikoloho | |
| Mocheso oa ts'ebetso | 0 ho isa ho 50ºC (32 ho isa ho 122ºF) |
| Mocheso oa polokelo | -20 ho 60ºC (-4 ho 140ºF) |
| Mongobo o Batlang (RH) | 10% ho isa ho 95% (ha e fokotsehe) |
| Bophahamo ba Tshebetso | 2000m (6562 ft) |
| Ho tshoha | IEC 60068-2-27, 15G, 11ms nako |
| Ho thothomela | IEC 60068-2-6, 5Hz ho 8.4Hz, 3.5mm kamehla amplitude, 8.4Hz ho isa ho 150Hz, ho potlakisa 1G. |
| Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse lahlehang 'marakeng.Boitsebiso bohle tokomaneng ena bo fanoe “joalokaha bo le” ntle le tiisetso ya mofuta ofe kapa ofe, e ka ba e hlahisitsweng kapa e ka bolelwang, ho kenyeletswa empa e sa felle feela ho ditiisetso tsa thekiso, ho itekanela morerong o itseng, kapa ho se tlole molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Le ha ho le jwalo, Unitronics e ke ke ya jara boikarabelo bakeng sa ditshenyehelo tse kgethehileng, tse sa lebellwang, tse sa tobang kapa tse tla latela tsa mofuta ofe kapa ofe, kapa tshenyehelo efe kapa efe e hlahang kapa e amanang le tshebediso kapa tshebetso ya tlhahisoleseding ena.Mabitso a kgwebo, matshwao a kgwebo, logos le matshwao a tshebeletso a hlahisitsweng. tokomaneng ena, ho kenyelletswa le moralo wa tsona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele ya Unitronics kapa batho ba bang bao e ka bang beng ba tsona. . |
| UG_SM35_43_70_RA22.pdf 10/22 |
Litokomane / Lisebelisoa
 |
unitronics SM35-J-RA22 3.5 Inch Programmable Logic Controller [pdf] Bukana ea Mosebelisi SM35-J-RA22 3.5 Inch Programmable Logic Controller, SM35-J-RA22, 3.5 Inch Programmable Logic Controller, Logic Controller, Controller |
