unitronics IO-AO6X Input-Output Expansion Module
6 Litlhahiso tsa Analoge tse Ikhethileng
IO-AO6X ke I/O Expansion Module e ka sebelisoang mmoho le balaoli ba khethehileng ba Unitronics OPLC. Mojule o fana ka liphetho tse ikhethileng tsa 6 12-bit; e sebetsa ho 0-10V, 0-20mA, le 4-20mA. Khokahano lipakeng tsa mojule le OPLC e fanoa ke adaptara. Mojule o ka beoa ka sekhahla holim'a seporo sa DIN, kapa oa kengoa holim'a poleiti.
| Boitsebiso ba karolo | |
| 1 | Sehokelo sa mojule-ho-mojuleng |
| 2 | Letšoao la boemo ba puisano |
| 3 | Pontšo ea phepelo ea motlakase e ka thoko |
| 4 | Lintlha tsa khokahano ea sephetho, AO4-AO5 |
| 5 | Lintlha tsa khokahano bakeng sa matla |
| phepelo ho yuniti ea analoge | |
| 6 | Sehokelo sa sehokelo sa mojule-to-module |
| 7 | Lintlha tsa khokahano ea sephetho, AO0-AO3 |
- Pele o sebelisa sehlahisoa sena, ke boikarabello ba mosebelisi ho bala le ho utloisisa tokomane ena le litokomane life kapa life tse tsamaeang le eona.
- Tsohle exampLits'oants'o tse bontšitsoeng mona li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho ipapisitsoe le li-examples.
- Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
- Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa.
Litaelo tsa polokeho ea basebelisi le ts'ireletso ea lisebelisoa
Tokomane ena e reretsoe ho thusa basebetsi ba koetlisitsoeng le ba nang le bokhoni ho kenya thepa ena joalo ka ha ho hlalositsoe ke litaelo tsa Europe bakeng sa mechini, low vol.tage, le EMC. Ke setsebi kapa moenjiniere feela ea koetlisitsoeng ho latela maemo a motlakase a lehae le a naha a lokelang ho etsa mesebetsi e amanang le likhoele tsa motlakase tsa sesebelisoa. Matšoao a sebelisoa ho totobatsa lintlha tse amanang le polokeho ea mosebelisi le ts'ireletso ea lisebelisoa ho pholletsa le tokomane ena. Ha matšoao ana a hlaha, boitsebiso bo amanang le bona bo tlameha ho baloa ka hloko le ho utloisisoa ka botlalo.
| Tlhaloso | Tlhaloso |
| Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. |
| Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. |
| Tlhokomeliso | E-ba hlokolosi. |
- Ho hloleha ho latela melaoana e nepahetseng ea polokeho ho ka baka kotsi e mpe ea motho kapa tšenyo ea thepa. Kamehla u be hlokolosi ha u sebetsa ka thepa ea motlakase
- Sheba lenaneo la mosebedisi pele o le tsamaisa.
- Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
- Kenya sekhechana sa potoloho se kantle 'me u nke mehato e nepahetseng ea polokeho khahlano le khutsufatso ea li-circuit ka har'a wiring ea kantle.
- Ho qoba ho senya sistimi, o seke oa hokela / oa hakolla sesebelisoa ha motlakase o buletsoe.
Mehopolo ea Tikoloho
- Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso ea kamehla kapa ho thothomela ho feteletseng.
- Tlohela sebaka se ka tlase ho 10mm bakeng sa moea pakeng tsa karolo e ka holimo le e ka tlase ea sesebelisoa le mabota a kampetsoeng.
- U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
- Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
Ho kenya Module
Ho hloa seporo sa DIN
Hlakola sesebelisoa seporong sa DIN joalokaha ho bontšitsoe ka tlase; mojule o tla be o lutse hantle seporong sa DIN.
Screw-Mounting
Setšoantšo se leqepheng le latelang se huleloa ho sekaleng. E ka 'na ea sebelisoa e le tataiso bakeng sa ho kenya li-screw-mounting module. Mofuta oa screw o ntseng o eketseha: ebang ke M3 kapa NC6-32.
Ho hokahanya Li-module tsa Katoloso
Adapter e fana ka khokahano lipakeng tsa OPLC le mojule oa katoloso. Ho hokela mojule oa I/O ho adaptara kapa mojulung o mong: Sututsa sehokelo sa module-to-module koung e ka lehlakoreng le letona la sesebelisoa.
Hlokomela hore ho na le kepisi e sireletsang e fanoeng ka adaptara. Sekoahelo sena se koahela kou ea mochine oa ho qetela oa I / O tsamaisong Ho qoba ho senya tsamaiso, u se ke ua kopanya kapa ua khaola sesebelisoa ha matla a le teng.
| Boitsebiso ba karolo | |
| 1 | Sehokelo sa mojule-ho-mojuleng |
| 2 | Sekoahelo se sireletsang |
Wiring
- U se ke ua tšoara lithapo tse phelang.
- Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase
Mekhoa ea ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm 2–3.31 mm2) bakeng sa merero eohle ea likhoele.
- Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ka har'a theminale ho netefatsa hore ho ka etsoa khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
- Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·m).
- U se ke ua sebelisa thini, solder, kapa ntho leha e le efe terateng e hlobotseng e ka etsang hore khoele ea terata e khaohe.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
I/O Wiring—Kakaretso
- Lithapo tse kenyang kapa tse tsoang ha lia lokela ho tsamaisoa ka thapo e tšoanang ea li-multi-core kapa ho arolelana terata e tšoanang.
- Lumella voltagtšitiso ea ho theola le lerata le mela e kenang e sebelisoang sebakeng se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
Liphetho tsa Analog
- Lithebe li lokela ho koaheloa, li kopantsoe le lefats'e la khabinete.
- Se ke oa hokela liphetho tse sa sebelisoeng.
- Sephetho se ka hokeletsoa ho ea hajoale kapa ea voltage.
- U se ke ua sebelisa current le voltage ho tsoa mohloling o le mong oa mohloli.
- Lipontšo tsa "COM" li khutsufalitsoe ka hare
| Litlhaloso tsa Teknoloji ea IO-AO6X | |
| Max. tshebediso ya jwale | 32mA boholo ho tloha ho 5VDC ea adaptara |
| Tšebeliso e tloaelehileng ea matla | 29mA @ 5VDC |
| Sesupo sa boemo | |
| (RUN) | LED e tala:
- E khantšitsoe ha khokahano ea puisano e thehoa lipakeng tsa module le OPLC. —Ea panya ha lehokelo la puisano le hlōleha. |
| Letšoao la matla le ikhethileng
(ISO. PWR) |
LED e tala:
- E khantšitsoe ha motlakase o le mong o butsoitse. |
| Ho behwa ka thoko | |
| Channel ho ea bese | Ee |
| Channel ho phepelo ea motlakase | Ee |
| Sekela ho kanale | Che |
| Liphetho tsa Analog | |
| Palo ea liphetho | 6 (e felileng feela) |
| Melemo ea tlhahiso | 0-10V, 0-20mA, 4-20mA. Sheba Ntlha ea 1. |
| Qeto (ntle le ho 4-20mA) Resolution ho 4-20mA | 12-bit (4096 diyuniti)
819 ho isa ho 4095 (likarolo tse 3277) |
| Loaro impedance | 1kΩ bonyane—voltage
500Ω boholo - hajoale. Sheba Ntlha ea 2. |
| Nako ea ho sokoloha | 2 mSec, e hokahaneng le puisano ea katoloso. |
| Phoso ea linearity | ±0.1% |
| Meeli ea phoso ea ts'ebetso | ±0.2% |
| Phepelo ea Matla a Analog | 24VDC |
| Sebaka se lumelletsoeng | 20.4 ho isa ho 28.8VDC |
| Max. tshebediso ya jwale | 170mA @ 24VDC |
| Tikoloho | IP20 / NEMA1 |
| Mocheso oa ho sebetsa | 0° ho isa ho 50°C (32 ho isa ho 122° F) |
| Mocheso oa polokelo | -20° ho isa ho 60°C (-4 ho 140° F) |
| Mongobo o Batlang (RH) | 5% ho isa ho 95% (ha e fokotsehe) |
| Litekanyo (WxHxD) | 80mm x 93mm x 60mm (3.15 x 3.66 x 2.362") |
| Boima ba 'mele | 159g (5.6oz.) |
| Ho phahamisa | Ekaba holim'a seporo sa 35mm DIN kapa se kentsoeng ka screw. |
| Lintlha: | |
| 1. Hlokomela hore mefuta e mengata ea I / O ka 'ngoe e hlalosoa ka bobeli ka wiring le ka har'a software ea molaoli.
2. Ha tlhahiso ea analog e behiloe ho sebelisa hona joale, tlhahiso e tlameha ho kopanngoa pele matla a butswe. |
|
Ho sebetsana le li-I/O ho Li-module tsa Katoloso
Maikutlo le liphetho tse fumanehang ho li-module tsa katoloso tsa I/O tse hokahaneng le OPLC li abeloa liaterese tse nang le tlhaku le nomoro. Lengolo le bontša hore na I/O ke input (I) kapa tlhahiso (O). Nomoro e bontša sebaka sa I/O tsamaisong. Nomoro ena e amana le boemo ba mojule oa katoloso tsamaisong, le boemo ba I/O mojulung oo. Li-module tsa katoloso li baloa ho tloha ho 0-7 joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
Foromo e ka tlase e sebelisoa ho abela liaterese tsa li-module tsa I/O tse sebelisoang hammoho le M90 OPLC. X ke nomoro e emelang sebaka sa mojule o itseng (0-7). Y ke palo ea tlhahiso kapa tlhahiso mojulung oo o itseng (0-15). Nomoro e emelang sebaka sa I/O e lekana le: 32 + x • 16 + y
Examples
- Kenyelletso #3, e fumanehang mojulung oa katoloso #2 tsamaisong, e tla rarolloa joalo ka I 67, 67 = 32 + 2 • 16 + 3
- Sephetho #4, se fumanehang mojuleng oa ho atolosa #3 tsamaisong, se tla sebetsanoa le O 84, 84 = 32 + 3 • 16 + 4
EX90-DI8-RO8 ke mojule oa I/O o ikemetseng. Esita le haeba e le eona feela module ho tlhophiso, EX90-DI8- RO8 e lula e fuoa nomoro ea 7. Li-I / O tsa eona li sebetsanoa ka tsela e nepahetseng.
Example
Kenyelletso #5, e fumanehang ho EX90-DI8-RO8 e hokahantsoeng le M90 OPLC e tla buuoa joalo ka I 149, 149 = 32 + 7 • 16 + 5
UL Compliance
Lihlahisoa tse thathamisitsoeng ka holimo li ka sebelisoa le Unitronics PLCs tse tsamaellanang. Litaelo tse qaqileng tsa ho kenya tse nang le litšoantšo tsa marang-rang tsa I/O bakeng sa mefuta ena, litlhaloso tsa tekheniki, le litokomane tse ling li fumaneha Laeboraring ea Tekheniki ho Unitronics. websebaka: https://unitronicsplc.com/support-technical-library/
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL. Mehlala e latelang: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi. Mehlala e latelang: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 li thathamisitsoe ke UL bakeng sa Sebaka se Tloaelehileng. UL Ratings, Programmable Controllers for Sebelisoa Libakeng tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa maemong a kotsi. libaka, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
Tlhokomeliso
- ◼Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Sehlopha sa A, B, C le D, kapa libakeng tse seng kotsi feela.
- Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
- TLHOKOMELO- Kotsi ea Ho phatloha-ho emisoa ha likarolo ho ka 'na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
- TLHOKOMELO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- TLHOKOMELO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
- Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.
Relay Output Resistance Ratings
Lihlahisoa tse thathamisitsoeng ka tlase li na le li-relay outputs: Input/Output extension modules, Models: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe. ho 3A res, ha lihlahisoa tsena tse ikhethileng li sebelisoa maemong a tikoloho a seng kotsi, li lekantsoe ho 5A res, joalo ka ha ho fanoe ka litlhaloso tsa sehlahisoa.
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng. Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena. Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona
Litokomane / Lisebelisoa
 |
unitronics IO-AO6X Input-Output Expansion Module [pdf] Bukana ea Mosebelisi IO-AO6X Input-Output Katoloso Mojule, IO-AO6X, Input-Output Katoloso, Mojule wa Katoloso ya Sephetho, Mojule wa Katoloso, Mojule |
