UNITRONICS EX-D16A3-TO16 XL IO Mojule oa Katoloso
Unitronics® EX-D16A3-TO16 ke mojule oa katoloso ea XL I/O bakeng sa ho sebelisoa hammoho le balaoli ba itseng ba Unitronics.
Li-module tsa XL li na le litlhophiso tse ntlafalitsoeng tsa I/O le lihokelo tsa I/O tse ka khonang. Ntle le moo, mojule ona o na le adaptara e hahelletsoeng bakeng sa ho buisana le PLC le ho fana ka matla ho li-module tse ling tsa katoloso ea sistimi.
Mojule ona o fana ka:
- Lisebelisoa tse 16 tsa dijithale, ho kenyeletsoa 1 HSC
- Lisebelisoa tse 3 tsa analog
- 16 liphetho tsa transistor, ho kenyeletsoa 1 HSO
Bakeng sa lintlha tse ling le litlhaloso tsa tekheniki, etela Technical Librar ho 0H www.unitronicsplc.com
Boitsebiso ba Karolo
| 1 | Sehokelo sa phepelo ea matla |
| 2 | Matšoao a boemo |
| 3 | Lihokelo tse hlahisoang |
| 4 | Libaka tsa khokahano ea phepelo ea motlakase tse tsoang |
| 5 | Boema-kepe ba katoloso ea PLC (bakeng sa puisano le PLC) |
| 6 | Matšoao a boemo ba ho kenya / sephetho |
| 7 | Sehokelo sa sehokelo sa mojule-to-module |
| 8 | Lihokelo tsa ho kenya |
Ho hloleha ho ikamahanya le ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe ya motho kapa tshenyo ya thepa.
Ke basebetsi ba tšoanelehang feela ba lokelang ho sebetsa le ho sebelisa sesebelisoa sena.- Ha motlakase o buletsoe, se ke oa hokela kapa oa hakolla sesebelisoa ho qoba ho senya sistimi.
Matshwao a Tlhokomediso le Dithibelo tse Akaretsang
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
| Letšoao | Tlhaloso | Tlhaloso |
|
Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. |
|
Tlhokomediso | Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa. |
| Tlhokomeliso | Tlhokomeliso | E-ba hlokolosi. |
|
||
|
|
|
|
|
|
Mehopolo ea Tikoloho
- Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso e tloaelehileng kapa ho sisinyeha ho feteletseng, ho latela maemo a fanoeng letlapeng la lintlha tsa theknoloji ea sehlahisoa.
- U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
- Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
- Ho kenya moea: 10mm sebaka se hlokahalang pakeng tsa mathōko a ka holimo/ka tlaase le mabota a kampetsoeng.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mehlala e latelang: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.
Mehlala e latelang: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16,IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO- DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO RO8L, IO-TO16, EX-A2X, EX-RC1 li thathamisitsoe ke UL bakeng sa Sebaka se Tloaelehileng.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
| Tlhokomeliso |
|
|
|
|
|
|
|
Relay Output Resistance Ratings
Lihlahisoa tse thathamisitsoeng ka tlase li na le liphetho tsa relay:
Li-module tsa katoloso ea Input/Output, Mehlala: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L
- Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe ho 3A res, ha lihlahisoa tsena tse khethehileng li sebelisoa maemong a se nang kotsi a tikoloho, li lekantsoe ho 5A res, joalokaha ho fanoe ka litlhaloso tsa sehlahisoa.
Ho kenya Module
Ho kenya mojule ho 35mm DIN-rail, e kenye ka ho lekana ho DIN-rail, joalo ka ha ho bonts'itsoe ka tlase.
- Kenya module sebakeng se otlolohileng.
- Ho etsa bonnete ba hore ho na le moya o motle, tlohela bonyane 50mm pakeng tsa sesebediswa le dintho tse ding tse ka hodimo kapa ka tlase ho sona.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Ho kopanya li-Modules
Ho hokela mojule ho adaptara kapa mojule oa katoloso:
- Sututsa sehokelo sa module-to-module (1) koung (2) e ka lehlakoreng le letona la mojule kapa adaptara.
- Sututsa kepisi e sireletsang (3) koung ea sehokelo ea mojule oa ho qetela. Sekoahelo se fanoa ka adaptara.
Ho hokahanya Module ho PLC
Sebelisa thapo ea puisano ho hokahanya boema-kepe ba katoloso ea module ea PLC ho PLC.
Hlokomela ho hokela thapo e nepahetseng. Lihokelo tsa thapo ena li kentsoe ka har'a insulation e mosehla. Hlokomela hore ntlha e le 'ngoe e tšoailoe
Ho PLC le tse ling Ho Adapter; kenya ka tsela e nepahetseng.
Mojule o fanoa ka thapo ea limithara tse 1, karolo ea nomoro EXL-CAB100. Bolelele bo bong ba li-cable le bona boa fumaneha.
Sebelisa thapo ea mantlha ea Unitronics feela 'me u se ke oa etsa liphetoho ho eona.
Wiring
| § Se ke oa tšoara lithapo tse phelang. | |
|
§ Thepa ena e etselitsoe ho sebetsa feela libakeng tsa SELV/PELV/Class 2/Limited Power.
§ Lisebelisoa tsohle tsa motlakase tsamaisong li tlameha ho kenyelletsa ho pata habeli. Liphello tsa phepelo ea motlakase li tlameha ho lekanyetsoa joalo ka SELV/PELV/Class 2/Limited Power. § Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa. § Mesebetsi eohle ea lithapo e lokela ho etsoa ha motlakase o TLOhile. § Sebelisa tšireletso e feteletseng, joalo ka fuse kapa sekhechana sa potoloho, ho qoba maqhubu a feteletseng sebakeng sa khokahano ea phepelo ea motlakase. § Lintlha tse sa sebelisoeng ha lia lokela ho kopanngoa (ntle le haeba ho boletsoe ka tsela e 'ngoe). Ho iphapanyetsa taelo ena ho ka senya sesebelisoa. § Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase. |
| Tlhokomeliso | § Ho qoba ho senya terata, se ke oa feta torque e kholo ea:
– Balaoli ba fanang ka block block e nang le bophahamo ba 5mm: 0.5 N·m (5 kgf·cm). – Balaoli ba fanang ka block block e nang le molumo oa 3.81mm f 0.2 N·m (2 kgf·cm). § Se ke oa sebelisa thini, solder, kapa ntho efe kapa efe terateng e hlobotsoeng e ka etsang hore khoele ea terata e khaohe. § Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase. |
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring;
- Balaoli ba fanang ka block block e nang le sekontiri sa 5mm: terata ea 26-12 AWG (0.13 mm2 -3.31 mm2).
- Balaoli ba fanang ka block block e nang le sekontiri sa 3.81mm: terata ea 26-16 AWG (0.13 mm2 - 1.31 mm2).
- Hlōla terata ho bolelele ba 7±0.5mm (0.270–0.300“).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
Litaelo tsa Wiring
- Sebelisa mehala e arohaneng ea likhoele bakeng sa sehlopha ka seng sa lihlopha tse latelang:
- Sehlopha sa 1: Phallo e tlasetage I/O le likhoele tsa phepelo, mehala ea puisano.
- Sehlopha sa 2: Phallo e phahamengtage Lines, Low voltage mehala e lerata joalo ka liphetho tsa mokhanni oa enjene.
Arola lihlopha tsena ka bonyane 10cm (4″). Haeba sena se sa khonehe, tšela likotopo ka 90˚angle.
- Bakeng sa ts'ebetso e nepahetseng ea sistimi, lintlha tsohle tsa 0V tsamaisong li lokela ho hokahana le seporo sa phepelo sa 0V.
- Litokomane tse ikhethileng ka sehlahisoa li tlameha ho baloa le ho utloisisoa ka botlalo pele li etsa mohala.
Lumella voltagtšitiso ea ho theola le lerata le mela e kenang e sebelisoang sebakeng se selelele.
Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
Ho fafatsa sehlahisoa
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka tsela e latelang:
- Sebelisa khabinete ea tšepe.
- Hokela 0V le lintlha tsa fatše tse sebetsang (haeba li le teng) ka kotloloho mobung oa lefatše oa sistimi.
- Sebelisa e khutsoanyane, e ka tlase ho 1m (3.3 ft.) le e tenya, 2.08mm² (14AWG) mets, lithapo tse ka khonehang.
Daisy Chaining
Ho tsamaisa likhoele, o ka kenya likhoele tse latelang ka letoto (ketane ea daisy). Sebelisa lithapo ka bobeli tse fanoeng molemong ona.
Pin ea sehokelo: n/p. Lithakhisa tsa sehokelo: +V, 0V. Lithakhisa tsa sehokelo sa matla: +V, 0V.
Netefatsa hore kakaretso ea mothapo o le mong ha e fete 10A. Haeba phini e itseng e hloka ho feta 10A, e hokela ka terata e arohaneng. Setšoantšo se latelang se bontša likhetho tsa wiring:
Wiring Phepelo ea Matla
- Kamehla kopanya phini ea lefats'e e sebetsang mobung oa lefatše. Sebelisa terata e inehetseng bakeng sa morero ona; ha ea lokela ho feta 1 mithara.
- Motlakase o sa ikemetseng o ka sebelisoa ha feela lets'oao la 0V le hokahane le lefats'e.
- Se ke oa hokela lets'oao le sa nke lehlakore kapa la mohala la 110/220VAC ho phini ea 0V ea sesebelisoa.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.
Lisebelisoa tsa Wiring
Setšoantšo se latelang se bontša lihokelo tsa ho kenya tse nang le linomoro tsa phini le linomoro tsa ho kenya tse tsamaellanang
Wiring Digital Inputs
- Wiring Digital Inputs
- Maikutlo a ka hoketsoa joalo ka pnp (positive logic) kapa npn (negative logic).
- Input 36 e ka sebetsa joalo ka k'haontara ea lebelo le holimo, e lekanyang maqhubu, kapa ho kenya lisebelisoa tsa dijithale ka sepheo se akaretsang (se setetsoe ka har'a software).
- Input 37 e ka sebetsa joalo ka mokhoa oa ho seta botjha ha khaontara kapa ka sepheo se akaretsang sa ho kenya dijithale (sete ke software).
- Bakeng sa ts'ebetso e nepahetseng ea lisebelisoa tsa digital, hokela pin ea n/p ho latela lipalo tse latelang.
- Ho fumana leseli mabapi le ho hokela lithakhisa tsa RG, sheba ho Ho hokela RG Pins.
Litlhahiso tsa Analog ea Wiring
Sets'oants'o se latelang se bonts'a khokahanyo ea terata e 2 le terata e 4.
- Sebelisa thapo e sothehileng e sirelelitsoeng.
- Hokela lithebe mobung oa lefatše mohloling oa lets'oao.
Wiring Phepelo ea Matla
Ho kopanya RG Pins
Bakeng sa ts'ebetso e nepahetseng ea lisebelisoa tsa dijithale le tsa analog le bakeng sa ts'ireletso ea EMI, hokela phini ea RG ea limojule tsohle tsa katoloso tse nang le matšoao a RG ho mojule oa 0V oa adaptara.
- Bolelele ka kakaretso ba terata e kopanyang likhoele tsa RG ho adaptara 0V lets'oao e tlameha ho ba tlase ho limithara tse 3.
- Hokela lithakhisa tsa RG ka letoto (ketane ea daisy). Ho etsa sena, sebelisa lithapo tsa RG ka bobeli.
Wiring Outputs
Sets'oants'o se latelang se bonts'a likhokahanyo tse hlahisoang tse nang le linomoro tsa phini le linomoro tsa tlhahiso tse tsamaellanang.
Wiring The Output Power Supply
- Motlakase o sa ikemetseng o ka sebelisoa ha feela lets'oao la 0V le hokahane le lefats'e.
- Se ke oa hokela lets'oao le sa nke lehlakore kapa la mohala la 110/220VAC ho phini ea 0V ea sesebelisoa.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.
- Adapter 0V le I/O 0V li tlameha ho hokela mohala o le mong, Ho iphapanyetsa sena ho ka senya sesebelisoa.
Liphetho tsa Wiring Transistor
- Output 32 e ka khoasolla e le pnp (mohloli) kapa npn (sink). pnp le npn li ka sebelisoa ka nako e le 'ngoe.
- Output 32 e ka sebelisoa joalo ka lebelo le phahameng.
Litlhaloso tsa Tekheniki
Kakaretso
- Bokhoni ba mojule oa I/O
Li-module tsa katoloso tse fihlang ho tse 7 tsa I/O li ka hokela mojuleng ona. Nomoro ena e ka fapana ho ea ka li-module tse sebelisitsoeng. - Matšoao a boemo RUN: LED e tala
- Leseli ha lehokelo la puisano le thehoa lipakeng tsa module le PLC
- Ho panya ha khokahano ea puisano e hloleha
- PWR: LED e tala
- Leseli ha ho fanoa ka matla
Phepelo ea motlakase
- Keletso voltag24VDC
- Sebaka se lumelletsoeng ke 20.4 ho isa ho 28.8VDC, ripple <10%
- Boholo ba tšebeliso ea hajoale 90mA @ 24VDC - EX-D16A3-TO16 feela
220mA @ 24VDC - mojaro o moholo ho phepelo ea 5VDC ha EX D16A3-TO16 e matlafatsa li-module tse ling tse supileng tsa katoloso ea I/O - Hona joale bakeng sa li-module tse eketsehileng 500mA ho tloha ho 5VDC, bona ntlha ea 1
Lintlha:
- Bakeng sa mohlalaample, 2 IO-DI8-TO8 modules e sebelisa boholo ba 140mA ea phepelo ea 5VDC ea adaptara.
Lisebelisoa tsa Dijithale
- Palo ea tse kentsoeng 16 (ka sehlopha se le seng)
- Mokhoa oa ho kenya pnp (positive logic) kapa npn (negative logic) - e ka hlophisoa ka ho sebelisa mohala o thata
- Galvanic ho itšehla thajana Ha ho letho
- Matšoao a boemo
HO: Li-LED tse tala ■ LED e le 'ngoe e tala bakeng sa kenyo ka 'ngoe: E khantša ha kenyo e sebetsa, sheba ntlha ea 2
Nominal input voltag24VDC - Keletso voltage
pnp (positive logic) 0–5VDC bakeng sa boemo ba logic 0 17– 28.8VDC bakeng sa logic state 1
npn (negative logic) 17–28.8VDC bakeng sa boemo ba logic 0 0–5VDC bakeng sa logic state 1 - Kenya 3.7mA @ 24VDC ea hajoale
- Kenyelletso ea 6.5kΩ
- Nako ea ho arabela 10ms e tloaelehileng
- Ho kenya ka lebelo le phahameng Litlhaloso tse karolong ena li sebetsa ha tlhahiso e lokisoa e le k'haontatara ea lebelo le holimo kapa mochini o methang maqhubu. Haeba e hlophisitsoe joalo ka sepheo se akaretsang sa tlhahiso ea dijithale, litlhaloso li joalo ka holimo. Sheba lintlha 3, 4, le 5.
- Qeto ea 16-bit kapa 32-bit, ho latela PLC
- Maqhubu a 30kHz boholo (ho 24VDC ±10%)
- Bophahamo bo fokolang ba sekhahla ke 14μs
Lintlha:
- Haeba ho kenya letsoho ho sebetsa empa ho se na puisano le PLC (RUN blinks), boemo ba LED ha bo khantše.
- Input 36 e ka sebetsa joalo ka k'haontara ea lebelo le holimo, e lekanyang maqhubu, kapa ho kenya lisebelisoa tsa dijithale ka sepheo se akaretsang.
- Input 37 e ka sebetsa joalo ka mokhoa oa ho seta botjha ha khaontara kapa ho kenya ka sepheo se akaretsang sa dijithale. Maemong ana ka bobeli, litlhaloso tsa tlhahiso ena ke tsa sepheo se akaretsang sa tlhahiso ea dijithale.
- Haeba input 36 e setetswe e le khaontara ya lebelo le phahameng mme ho se ho seta botjha ho hlophiswa, kenya tshebetsong 37 e le sepheo se akaretsang sa ho kenya dijithale.
Lisebelisoa tsa Analog
- Palo ea tse kentsoeng 3
- Mofuta oa ho kenya 0–20mA kapa 4–20mA
- Kenyelletso ea 191Ω
- Boemo bo phahameng ba ho kenya 28mA, 5.3VDC
- Galvanic ho itšehla thajana Ha ho letho
- Mofuta oa thapo o Shielded twisted-pair
- Mokhoa oa ho sokoloha Khakanyo e hlahlamallang
- Qeto (0-20mA) 10-bit (likarolo tse 1024)
- Qeto (4-20mA) 204 ho isa ho 1023 (likarolo tse 820)
- Nako ea phetoho Kemiso e 'ngoe le e 'ngoe e hlophisitsoeng ke sampe etelletse pele hang ka 1.67ms. Bakeng sa mohlalaample, haeba li-inputs tse 3 li hlophisitsoe, ho nka 3 * 1.67 = 5ms ho sample lisebelisoa tsohle tsa analoge. Sheba ntlha ea 6.
- Ho nepahala ± 0.9% ea sekala se felletseng
- Pontšo ea boemo ho software: Haeba boleng bo itseng bo kentsoeng ke 1024, tlhahiso e le 'ngoe ea analoge e kheloha ka holim'a mefuta e lumelletsoeng.
Haeba litekanyetso tsohle tsa ho kenya ke 1024, e ka 'na eaba lintho tsohle tse kenang li kheloha ka holimo ho sebaka se lumelletsoeng kapa letšoao la RG ha lea hokahanngoa.
Lintlha:
- Nako ea ho sokoloha ha e kenyelle nako ea puisano le nako ea ho hlahloba PLC le PLC.
Digital Outputs
- Palo ea liphetho 16 transistors
- Mofuta wa tlhahiso Sephetho sa 32: Ekaba pnp: P-MOSFET (drain e bulehileng) kapa npn: N MOSFET (open drain) Litholoana 33–47: pnp: P-MOSFET (open drain) Sheba lintlha 10 le 11
- Galvanic ho itšehla thajana Ha ho letho
- Lipontšo tsa Boemo
- TSOA: Li-LED tse khubelu ■ LED e le 'ngoe e khubelu bakeng sa tlhahiso e' ngoe le e 'ngoe: E khantša ha tlhahiso e lumellanang e sebetsa
- SC: LED e khubelu ■ Leseli ha pnp output transistor load e baka potoloho e khutšoanyane, sheba ntlha ea 12
- Boholo ba tlhahiso ea hajoale
Boemo bo phahameng ba hona joale
Nako e phahameng ka ho fetesisa HO TLOA ho ea HO ON
Nako e phahameng ka ho fetisisa ea ho lieha ho HO TLOA
HSO khafetsa. sebaka se nang le moroalo o hanyetsanang
Maximum ON voltaglerotholi
Tšireletso e khutšoanyane ea potoloho
Moqtage Tšupisopnp npn 0.5A ka tlhahiso, 4A kakaretso 50mA Tlhōrō ea 0.6, hang ka metsotsoana e meng le e meng ea 2, bakeng sa nako ea 10ms ka tlhahiso, eseng ka nako e le 'ngoe N/A 1ms 1µs 0.15ms 10µs 1Hz–500Hz (ka tekanyo e phahameng ea khanyetso ea 470kΩ) 1Hz–32kHz (boholo ba khanyetso ea mojaro ea 1.5kΩ) 0.5VDC 0.4VDC Ee Che Phepelo ea motlakase ea dijithale 3.5VDC ho 28.8VDC, e sa amaneng le voltage ea mojule oa I/O kapa molaoli - Phepelo ea motlakase e tsoang
phepelo ea motlakase
Voltag24VDC
Tshebetso voltage 20.4VDC ho 28.8VDC
Lintlha:
- Output 32 e ka khoasolla e le pnp (mohloli) kapa npn (sink). pnp le npn li ka hokahanngoa ka nako e le 'ngoe.
- Output 32 e ka sebelisoa joalo ka lebelo le phahameng.
- Ha mojaro o hlahisoang o baka potoloho e khuts'oane, sistimi e hakolla tlhahiso eo ebe e bonesa SC LED phanele e ka pele ea module. Potoloho e khuts'oane e boetse e khetholloa ke software ea PLC. Bakeng sa mohlalaample, ho Vision OPLC, SB 5 e bulela le SDW 5, e nang le bitmap, e bontša hore na ke mojule ofe o bakileng potoloho e khutšoanyane. Ho fumana lintlha tse ling, sheba thuso ea inthaneteng ea PLC.
Litekanyo
- Boholo (W x H x D) 80 x 135 x 60mm (3.15 x 5.31 x 2.36 ″).
- Boima ba 'mele (hoo e ka bang) 383g (13.5oz)
Tikoloho
- Mocheso oa ho sebetsa 0 ho 50 C (32 ho 122 F)
- Mocheso oa polokelo -20 ho isa ho 60 C (-4 ho isa ho 140 F)
- Mongobo o Relative (RH) 10% ho isa ho 95% (o sa nyenyefatseng)
- Mounting Snap-e behiloeng holim'a 35mm DIN-rail (IP20/NEMA1)
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng. Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena. Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona.
Litokomane / Lisebelisoa
 |
UNITRONICS EX-D16A3-TO16 XL IO Mojule oa Katoloso [pdf] Bukana ea Mosebelisi EX-D16A3-TO16 XL IO Katoloso Mojule, EX-D16A3-TO16, XL IO Katoloso Mojule, Katoloso Mojule, Mojule |
