UBiBOT UB-VS-N1 Sensor ea Kantle ea Vibration
Litlhaloso tsa Sehlahisoa
- Mohlala: UB-VS-N1
- Phepelo ea motlakase: 3 * AA libeteri, 4.5V
- Max Hona Joale: 306mA
- Metharo ea ho lekanya: Maximum vibration value: 0~1000
- Tikoloho ea Mosebetsi: -40~60°C, 0~80%RH
- Bolelele ba Cable ea Sehokelo: 3m
- Tsamaiso ea Khokahano: RS485 Modbus RTU Protocol
- Aterese ea RS485: 0x41
- Tekanyo ea Baud: 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s (default), 19200 bit/s
Litaelo tsa Tšebeliso ea Sehlahisoa
Melao ea Khokahano
- Sistimi ea Khoutu: Modbus-RTU
- Bonyane ba data: li-bits tse 8
- Parity Checking Bit: Ha ho letho
- Stop Bit: 1 bit
- Ho hlahloba phoso: Hlahloba CRC
- Baud Rate: Khetha ho tsoa likhethong tse fumanehang.
Sebopeho sa Sebopeho sa DataDetailed information on the Modbus-RTU communication protocol format is provided in the manual for reference.
Kenyelletso ea Sehlahisoa
The vibration sensor adopts the original imported sensor, built-in 5 batteries, can be continuously measured, stable data, high precision, strong anti-interference ability, long service life.
Sebelisa Maemo a Nyeoe
E loketse likamore tsa thepa ea tikoloho, boema-fofane, liteishene tsa terene, taolo ea meaho ea khoebo, malapa a malapa, meaho ea liofisi, likolo, likamore tsa kopano, mabenkele a mabenkele, lihotele, li-gymnasium, libaesekopo, lilaeborari le libaka tse ling.
Likaroloana
- Real-time monitoring of vibration values.
- Suspension or stick-on mounting for ease of use.
Litlhaloso tsa Sehlahisoa
| Litlhaloso | |
| Mohlala | UB-VS-N1 |
| Phepelo ea motlakase | 3 *AA batteries（4.5V） |
| Boemo ba Hona joale | 306mA |
| Mekhahlelo ea ho lekanya | Maximum vibration value: 0~1000 |
| Tikoloho ea Mosebetsi | -40 ~ 60 ℃, 0 ~ 80%RH |
| Sehokedi | Audio |
| Bolelele ba Cable | 3m |
| Puisano Protocol | RS485 Modbus RTU Protocol |
| Aterese ea RS485 | 0x41 |
| Baud Rate | 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s (ea kamehla), 19200 bit/s |
Taelo ea Wiring
Mekhoa ea puisano
Mekhahlelo ea mantlha ea puisano
| Puisano Basic Parameter | |
| Sistimi ea Coding | 8-bit binary |
| Boitsebiso ba data | 8 likotoana |
| Parity Checking Bit | ha ho letho |
| Emisa Bit | 1 hanyane |
| Phoso ea ho Hlahloba | Tlhahlobo ea CRC |
| Baud Rate | 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s (default), 19200 bit/s |
Sebopeho sa Sebopeho sa Data
Protocol ea puisano ea Modbus-RTU e sebelisoa ka mokhoa o latelang:
- Sebopeho sa pele ≥ 4 byte ka nako.
- Khoutu ea aterese: 1 byte, kamehla 0x41.
- Khoutu ea mosebetsi: 1 byte, khoutu ea ts'ebetso ea ts'ehetso 0x03 (bala feela) le 0x06 (bala / ngola).
- Sebaka sa data: N byte, 16-bit data, high-byte e tla pele.
- Ho hlahloba phoso: 16-bit CRC khoutu.
- Sebopeho sa ho qetela ≥ li-byte tse 4 tsa nako.
| Kopa | ||||||||||||
| Aterese ea Lekhoba | Khoutu ea Mosebetsi | Ngolisa Aterese | Nomoro ea Lingoliloeng | CRC LSB | CRC MSB | |||||||
| 1 baiti | 1 baiti | 2 li-byte | 2 li-byte | 1 baiti | 1 baiti | |||||||
| Karabo | ||||||||||||
| Aterese ea Lekhoba | Khoutu ea Mosebetsi | No. ea Byte | Litaba 1 | Litaba 1 | … | Litaba n | CRC | |||||
| 1 baiti | 1 baiti | 1 baiti | 2 li-byte | 2 li-byte | … | 2 li-byte | 2 li-byte | |||||
Ngolisa Aterese
| Ngolisa Aterese | ||||
| Aterese | Litaba | Ngolisa bolelele | Khoutu ea Mosebetsi | Tlhaloso ea litlhaloso |
| 0x0000 | Battery Voltage | 1 | 03 | Unsigned integer data,
divided by 100 |
| 0x0001 | Keketseho ea nako ea ts'ebetso ho potoloha | 1 | 03 | Palo kaofela |
| 0x0002 | Boholo ba boleng ba vibrate nakong ea potoloho
(sebele sa kamehla sa 60s) |
1 | 03 | Palo kaofela |
| 0x0003 | Keketseho ea boleng ba vibrate nakong ea potoloho
(nako e sa lekanyetsoang ea 60s) |
1 | 03 | Palo kaofela |
| 0x0004 | Nako e bokelletsoeng ea ts'ebetso nakong ea ts'ebetso
(e hlakotsoe ka mor'a theko e 'ngoe le e 'ngoe) |
2 | 03 | Palo kaofela |
|
0x0006 |
Maximum vibration value during cumulative runtime (cleared for re-collection after each
ho fumana) |
2 |
03 |
Palo kaofela |
| 0x0008 | Kakaretso ea boleng ba vibrate nakong ea koketso
nako ea ho sebetsa (e hlakotsoe ka mor'a theko e 'ngoe le e 'ngoe) |
2 | 03 | Palo kaofela |
| 0x000A | Accumulated runtime in s (ho hlakile hore ho tla boela ho
bokella nako ka mor'a ho reka) |
2 | 03 | Palo kaofela |
| 0x000C | Activity time during cumulative runtime | 2 | 03 | Palo kaofela |
|
0x000E |
Maximum vibration value during cumulative runtime (emptied and re-collected after
theko e 'ngoe le e' ngoe) |
2 |
03 |
Palo kaofela |
| 0x0010 | Kakaretso ea boleng ba vibrate nakong ea koketso
nako ea ho sebetsa (e hlakotsoe ka mor'a theko e 'ngoe le e 'ngoe) |
2 | 03 | Palo kaofela |
| 0x0014 | X-axis acceleration | 1 | 03 | Nomoro e saenneng |
| 0x0015 | Ho potlakisa ha Y-axis | 1 | 03 | Nomoro e saenneng |
| 0x0016 | Z-axis acceleration | 1 | 03 | Nomoro e saenneng |
| 0x0017 | Kakaretso ea ho potlakisa | 1 | 03 | Nomoro e saenneng |
| 0x0064 | Aterese | 1 | 03/06 | 1-255 |
| 0x0065 | Baud Rate |
1 |
03/06 | 1: 4800, 2: 9600, 3:14400, 4:
19200, 5: 38400, 6: 115200 |
HLOKOMELA
- Se ke oa hula mohala oa lead lead, u se ke oa theola kapa oa otla sensor ka matla.
- Do not expose the sensor to high temperatures or long term exposure to steam, water mist, water curtains or condensation..
Lipotso Tse Botsoang Hangata
P: Ke mofuta ofe oa mocheso o khothalletsoang oa ho sebetsa bakeng sa sensor ea vibrate?
A: The recommended working temperature range is -40°C to 60°C.
P: Nka hlahloba matla a betri joangtagea sensor?
A: Refer to register address 0x0000 to access the battery voltage tlhahisoleseding.
Litokomane / Lisebelisoa
 |
UBiBOT UB-VS-N1 Sensor ea Kantle ea Vibration [pdf] Bukana ea Mosebelisi UB-VS-N1 External Vibration Sensor, UB-VS-N1, External Vibration Sensor, Vibration Sensor, Sensor |