U-PROX PIR Combi Security Systems Buka ea Mosebelisi

U-PROX PIR Combi ke sesebelisoa se kopaneng sa metsamao e se nang mohala le sensor ea acoustic breakglass e etselitsoeng meaho ea ka tlung ea bolulo kapa ea indasteri. E na le sensor ea PIR le microphone, e lemoha liphetoho ho leka-lekana la mocheso kapa molumo oa khalase e pshatlang. Ha e hlahisoa, sesebelisoa se romela tsebiso ea alamo ka mokhoa o sireletsehileng ho phanele ea taolo ea U-PROX. Sensor ena e etselitsoe tšebeliso ea ka tlung feela.

Bakeng sa tšehetso ea tekheniki, ka kopo letsetsa +38(091)481-01-69 kapa imeile support@u-prox.systems

Litlhokomeliso tsa Tšireletseho

Tšireletseho ea Battery:
Sesebelisoa sena se tsamaisoa ke betri ea lithium e hahiloeng ka har'a 3V CR123A. Ho fetola betri ka mofuta o fosahetseng ho ka baka mollo kapa ho phatloha. Kamehla u lahle libeteri tse sebelisitsoeng ho latela melao ea lehae.

Mehato ea Tlhokomelo ea Kemiso:
Kenya sesebelisoa feela ha motlakase o tima 'me u latele litataiso tsohle tsa polokeho ea motlakase le mollo. Se ke oa harola sesebelisoa kapa motlakase oa sona ha se ntse se le matla.

Ho tšoara:
Qoba ho pepesa sensor maemong a feteletseng kapa ho sebelisa lisebelisoa tse sa lumelloeng.

Likopo tsa ho Itloaetsa

The U-PROX PIR Combi is designed to integrate seamlessly with the U-PROX security system. Customize its settings and monitor its performance using: U-PROX Installer Mobile Application: Use your mobile device to perform setup, testing, calibration, and configuration of the sensor. Installer Web Portal: Fumana ho web portal ho https://security.u-prox.systems/ua/u-prox-pir-combi-ua/ bakeng sa tlhophiso e felletseng le tlhokomelo e hole.

Tlhaloso le Molao-motheo oa Ts'ebetso

The U-PROX PIR Combi is a dual-function sensor that combines a motion detector and a break-glass detector. It continuously monitors the area for two types of events:

Motion Detection: Using a passive infrared (PIR) sensor, it detects human movement while remaining insensitive to animals up to 20 kg.

Breakglass Detection: The built-in microphone and Fresnel lens detect the sound of glass breaking. The sensor monitors glass dimensions ranging from 0.5 m x 0.5 m to 3.0 m x 3.0 m with a detection angle of 120° and a glass thickness of 2–8 mm.

When an event is detected—either motion or glass breakage—the sensor sends an encrypted alarm notification via an ISM-band wireless interface tothe U-PROX control panel.

Lintlha tse sebetsang

Nyeoe ea Sesebelisoa
Hole ea Microphone
Letšoao la Leseli bakeng sa Mekhoa ea Ts'ebetso
Lense ea Fresnel (bakeng sa PIR ka bobeli le tlhahlobo ea acoustic)
Mounting Bracket (e fumaneha joalo ka borakete ea lebota kapa bracket ea angle)
Tampere (Sabotage) Fetoha
Ka morao ho Sesebelisoa
Bulela/Oma Switch/Konopo

Litlhaloso tsa Tekheniki

Phepelo ea Matla: 3V, CR123A lithium betri (e kentsoe pele); bophelo ba tšebeletso ea betri ho fihlela lilemo tse 5

Puisano e Se nang Wireless:
- ISM-band interface e nang le liteishene tse ngata tse sebelisang puisano e sireletsehileng ea litsela tse peli (256-bit encryption le sabotage detection) ITU Region 1 (EU, UA): 868.0 to 868.6 MHz, 100 kHz bandwidth, 20 mW max, up to 4800 m (line-of-sight) ITU Region 3 (AU): 916.5 to 917 MHz, 100 kHz bandwidth, 20 mW max, up to 4800 m (line-of-sight)

Thempereichara ea ho sebetsa: -10°C ho ea ho +55°C
Boima le Boima:
- Device: 90 x 60 x 34.35 mm; Weight: 150 grams

Likhetho tsa Bracket:
- With an angle bracket: 90 x 60 x 41.6 mm
- With a wall bracket: 90 x 60 x 48.84 mm
Ho fumanoa ha Breakglass:
- Glass Dimension Range: 0.5 m x 0.5 m to 3.0 m x 3.0 m
- Angle ea ho khetholla: 120 °
- Botenya ba Khalase: 2 mm ho isa ho 8 mm
Ho Fumana Motsamao:
- Boholo ba Sebaka sa Mosebetsi: 8 m
- Target Detection Speed: 0.3 to 3 m/s
- Optical Noise Immunity: >6500 Lux

Li-parameter tse ling:
- Tšireletso ea liphoofolo tse ruuoang lapeng: Ho fihla ho 20 kg
- Detection Angle for Glass: 88°
- Environmental Conditions: Permissible humidity up to 75%;
- Environmental class II (EN 50131-1)
- Sehlopha sa Tšireletso: 2

Litaelo tsa ho Hloma

Ho khetha Sebaka sa ho Kenya
Libaka tse Loketseng: Kenya ka tlung libakeng tseo sebaka sa sensor ea view e tla koahela lintlha tse ka bang teng tsa ho kenella (mohlala, haufi le lifensetere kapa mamati a khalase).

Qoba:

Areas with direct sunlight or rapid temperature changes, Rooms with high levels of radio interference,e Locations near objects that may block or attenuate the signa,l Areas where the sensor is exposed to excessive humidity or extreme temperatures

Keletso: Sebelisa sesebelisoa sa U-PROX Installer ho etsa liteko tsa mefuta-futa bakeng sa sebaka se nepahetseng.

Mekhoa ea ho Mount

Khetho A - Ho Kenyetsoa ha Bracket ea Wall:

Prepare the Surface: Ensure the wall is clean, dry, and ﬂat.
Mount the Bracket: Secure the wall bracket using the screws and dowels provided in the mounting kit.

Install the Sensor: Place the sensor onto the bracket and slide it down until the tamper switch locks. A conﬁrmation light on the indicator will show that the sensor is properly installed.

Kgetho B - Ho kenngwa ha Angle Bracket:

Prepare the Surface: Verify the surface suitability as with wall installation.

Attach the Angle Bracket: Fix the angle bracket securely with the provided hardware.
Position the Sensor: Insert the sensor into the bracket, ensuring proper alignment and that the tamper switch e sebetsa.

Ho hokahanya Likarolo tsa Kantle
If additional external components (such as an LED for visual arm/disarm conﬁrmation) are required, connect them to the dedicated contacts as follows:

LD Contact: + LED (red)
GND Contact: Ground (blue)
DC Contact: Sensor (yellow)

Ts'ebetso le Litlhophiso

Ngoliso ea Sesebelisoa
Qala U-PROX Installer Mobile App kapa Web Portal 'me u kene ka mangolo a hau a ho kenya.

Eketsa Sesebelisoa: Latela litaelo tse skrineng ho ngolisa U-PROX PIR Combi le phanele ea taolo ea U-PROX. Bakeng sa liphetho tse ntle, tšoara sensor ka har'a mitha e ka bang 1 ea phanele ea taolo nakong ea ngoliso.

Pontšo ea Alamo le Teko ea Puisano
Indicator Feedback: The sensor’s light indicator will display the operating mode. During a range test, the LED may ﬂash different colors to indicate the quality of the signal:

Green: Excellent signal (up to –87 dBm)
Yellow: Average signal (–88 to –94 dBm)
Red: Poor signal (–95 to –111 dBm)

Alarm Notiﬁcation: When motion or glass breakage is detected, the sensor sends an encrypted alarm notiﬁcation to the U-PROX control panel.

Conﬁguring Settings

Light Indication: Toggle the LED indicator on/off according to your requirements.
Group Assignment: Assign the sensor to the appropriate security group (for example, “Front Door” kapa “Living Room Window”) ho thusa tsamaiso e kopaneng ea ho beha leihlo.
Additional Settings: Further settings may be conﬁgured via the U-PROX Installer app or web portal ho ikhethela boitšoaro, joalo ka tieho ea alamo le karabelo ho tampho kheloha.

Tlhokomelo le Tšebeletso

Ho hloekisa:
Hlakola sesebelisoa nako le nako ka lesela le bonolo, le omeletseng ho tlosa lerōle le lithōle.

Phetoho ea Betri:
Haeba bophelo ba tšebeletso ea betri bo fela (ho fihla ho lilemo tse 5), tlosa betri ea CR123A feela ka mofuta o amohetsoeng. Latela litataiso tsa moetsi 'me u lahle libeteri tse sebelisitsoeng ho latela melao ea lehae.

Ho batle phoso:
Haeba sensor e sa buisane ka nepo, netefatsa ho kengoa, hlahloba hore na ha ho na tšitiso, 'me u hlahlobe tlhahlobo e fumanehang ho U-PROX Installer app.

Ho lumellana le Warranty

Ho latela melao-motheo:
U-PROX PIR Combi e lumellana le Radio Equipment Directive 2014/53/EU le Directive 2011/65/EU (RoHS). Phatlalatso ea mantlha ea Conformity e fumaneha ho U-PROX website in the Certiﬁcates section.

Tiisetso:
Tiisetso ea lisebelisoa tsa U-PROX (ntle le libeteri) e sebetsa lilemo tse peli ho tloha ka letsatsi la theko. Haeba mathata a hlaha, ka kopo ikopanye support@u-prox.systems remote troubleshooting may be available.

Sebaka sa Phano

Pakete e felletseng e kenyelletsa:

U-PROX PIR Combi Sensor
CR123A Battery (E kentsoe pele)
Bracket ea leboteng
Angle Bracket
Ho hloa Kit
Tataiso ea ho Qala ka Potlako

https://u-prox.systems/en/uproduct/u-prox-pir-combi/

LBH

Q: Can the U-PROX PIR Combi detect both motion and glass breakage simultaneously?

A: Yes, the sensor can detect both types of events and send notifications accordingly.

Q: What is the weight capacity for the pet immunity feature?

A: The pet immunity feature is effective for animals up to 20kg.

Litokomane / Lisebelisoa

U-PROX PIR Combi Security Systems [pdf] Bukana ea Mosebelisi
PIR Combi Security Systems, PIR Combi, Security Systems, Systems

Litšupiso

Bukana ea Mosebelisi

U-PROX PIR Combi Security Systems

Litlhaloso

Selelekela