TZONE TZ-Tag08 LoRa Wireless Temp Sensor User Guide

Data Collection and Monitoring
The device collects data using the LoRa 18B20 temperature sensor and stores it in memory. Follow these steps to monitor the data:

You can set the data collection time from 1 minute to 1440 minutes based on your requirements.
The device has 3 working modes: Normal working mode, low voltage mode, and temperature alarming mode.

U ka khona view the collected data, including temperature data, RSSI signal strength, and battery power on the LCD.

Device Status and Alerts
The device provides status indications through LED lights and LCD:

The green LED indicates normal operation, while the red LED signals issues like temperature exceeding limits or low voltage.
You can set alarms for low voltage and temperature/RH variations to receive timely alerts.

Mesebetsi ea konopo
Likonopo tse sesebelisoa li na le mesebetsi e latelang:

‘Mode On’ button: Press and hold for 3 seconds to turn on the device.

‘Mode Off’ button: Press and hold for 3 seconds to turn off the device.
‘Data send’ button: Press shortly to initiate data transmission.

Fetileview

LoRa Wireless Temp Sensor(TZ-Tag08) is a high quality product designed by Tzone Digital Technology Co., Ltd. Well overcome many shortcomings happened in similar products, with full consideration on the tough environment and more. It has features that include long range (5km), small volume (106mm*57mm*33mm), and long time using. Validated by many vital projects with stability and reliability features. LoRa Sensor can collect temp readings with preset interval and send out via LoRa communicating module, then the Gateway can translate raw data to temperature and battery voltage information. Real-time transmission and data storage functions can be implemented simultaneously. It is equipped with LCD, LED, and buzzer. For more intuitive viewing of temperature data, RSSI signal strength, battery power, sound, and light alarm, etc., it could be widely used in temperature monitoring applications with our gateway products.

Kopo

Freezer, refrigerator, etc.
Sethopo sa temo
Plant and workshop
Cold chain reefer and refrigerated trailer
Pharmacy warehouse and laboratory

Sebopeho

LoRa 18B20 temperature sensor, with reliable stability, large measure range and quick response.
LoRa communicating module uses the new generated LoRa chip from American Semtech, with strong sending power, powerful penetrability and low attenuation.

The data collecting time could be set by customers from 1 minute to 1441440 minutes with worldwide replication.
The sensor has 3 working modes: Normal working mode, low voltage mode, and temperature alarming mode. To better track the ambient temperature change, the data collection time is different in each mode,

Built-in high performance Li-SOCL2 battery, long time standby and stable performance. The electricity is less than 5uA when in the sleep mode, it is equipped with a super capacitor to effectively realize the full utilization of the battery, and solve the problem of battery instability at high and low temperatures.
All the data collected by the transmitter can be stored in memory, and can be read out through USB.

Using FDMA, TDMA, and other technologies to avoid wireless conflict.
Ensure data is not lost with ACK.
When disconnect will automatically update the sending interval to reduce power consumption.

The sensor can receive a command from the gateway, the parameters can be set.
With LCD, the message(temperature data, RSSI signal strength, battery power, etc.)can be visually viewed.

The buzzer will alarm if the temperature exceeds the limit.

Tlhaloso

Ntho	Sebopeho
Betri	Built-in 4000mAh/3.6V
Measure Media	Moea o phelang
Range of Temp Sensor probe	Temperature:-55℃ ~ +125℃
Ho nepahala ha Sensor ea Temp	Temperature ±0.5℃(-10~85℃), ±1℃(other )
Boemo ba ho sebetsa	-30℃~+60℃;5% RH ~ 95% RH (non-condensed)
RF Frequency	433/470/868/915MHz
Ho feto-fetoha ha molumo oa lentsoe	Lora
Fetisetsa Matla	20dbm(adjustable)
Maximum Range in Open Area	5KM
Nako ea ho fetisa	1min-1440mins(user definable)
Moqolo o tlasetagalamo	Yes (user definable)
Temp/RH Alarm	Yes (user definable)
Emeng ka Hona Joale	<5uA
Boemo ba IP	IP54
Bokhoni ba memori	50000
Bophelo ba Battery	3 years (in 15mins interval)
NW	135g
Boemo	106mm57mm33mm

Mokhoa oa ho sebetsa

Mokhoa oa ho sebetsa	Boemo ba ho sebetsa
Mokhoa o Tloaelehileng	LoRa Sensor will collect the Temp readings and send out as settings via the LoRa communicating module.
Vol e tlasetage mokhoa	Device will send data every 30 minutes (adjustable) after entering low voltagmokhoa oa e, voltage ka tlase ho 2.2V (adjustable), Please change the new one ASAP
Temp alarming mode	Device will send alarming readings in a shorter interval than the customer’s settings (adjustable), to record the change of ambient temperature.

P.S.: Priority: Temp alarming mode > Low voltage mode > Normal mode

Device status when sending data

The device will flash once when the device is sending a packet of data, and the LCD icon will be displayed.
LED bright status:

Green: normal.
Red: Something wrong with the device, such as temperature exceeding the limit, low voltage. LCD, please refer to 9. LCD indication

Mosebetsi oa konopo

Mokhoa	Tshebetso	Boemo ba sesebelisoa	Pontsho
On	Keep button pressed for 3s	1. The green LED bright in 5s 2. LCD turns on	The device starts sending data
E tima	Keep button pressed for 3s	1. The red LED bright in 5s 2. LCD turn off	The device stops sending data.
Ho romela lintlha	Tobetsa haufinyane	LED bright one time	Only valid in boot mode LED flash status: abnormal(red), normal(green)

LCD Pontšo ea Pontšo

Mokhoa oa ho koala: the LCD is not displayed.
Boot mode: the LCD is displayed.

LCD will display LORA icon, Send icon, Temperature alarm icon, Running status, Temperature icon, RSSI signal icon, Battery status, Temperature information.

Buzzer working mode

The buzzer will work when the temperature exceeds the limit, the buzzer will ring and then stop.

Open instruction:

03 instruction
36 instruction

How to close buzzer:

Temperature return to normal
Press button shortly；
Enter configuration mode；
Turn off；
The USB sends a close instruction
The gateway sends a close instruction
The buzzer working time has ended

PS:

After the buzzer works once, it needs to happen again after the temperature is abnormal (the temperature should return to normal and then abnormal).
The device is a close buzzer function by default, please open this function if you need.
The buzzer with high power consumption will reduce battery li. Such an asset is this function according to your application.

Litaelo

The factory setting of the device is off mode by default, Please refer to the button function after you get it, press and hold the button for 3s to start up, and the device will automatically send data to the gateway, The data transmission interval is 15 minutes by default, if you want to send data quickly, please press the button shortly.TZ-Tag08 is a data sender, which should work with our LoRa Gateway/LoRa Gateway_WIFI products. Please check the user guides or contact us directly.
After completing the above steps, you can query the data on our company’s platform. If you want to configure parameters, please open the upper cover of the device, and insert our configuration line, at this time the green LED is bright, indicating the device has entered the configuration mode. For detailed configuration instructions and configuration methods, please refer to” TAG08” Configure Software Manual.

Lintlha

Being close to a metal object will interfere with the signal, causing the signal to weaken.
Please keep away from water and corrosive chemicals.
Please tell us your application and configuration requests, we will try to configure it well before delivery, and how to install properly.

Phatlalatso ea FCC

Sesebelisoa sena se lumellana le karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Liphetoho kapa litokiso tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
HLOKOMELA: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses radio frequency energy, and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
Eketsa karohano pakeng tsa thepa le moamoheli.
Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebediswa se hlahlobilwe ho kopana le ditlhoko tse akaretsang tsa kgahlamelo ya RF. Sesebelisoa se ka sebelisoa maemong a ponts'o a nkehang ntle le thibelo.

Polelo ea ISED

Sesebediswa sena se tsamaellana le ditekanyetso tsa RSS tsa Industry Canada-exemption. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: (1) Sesebelisoa sena se ke ke sa baka tšitiso, 'me (2) Sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Sesebelisoa sa digital se lumellana le Canadian CAN ICES‐3 (B)/NMB‐3(B).

Bakeng sa Moamoheli:
Sesebediswa sena se kopana le ho se amohelwe meeding ya ditlhahlobo e tlwaelehileng karolong ya 2.5 ya RSS 102 le ho dumellana le kgahlamelo ya RSS 102 RF, basebedisi ba ka fumana tlhahisoleseding ya Canada mabapi le kgahlamelo ya RF le boikamahanyo.

Bakeng sa Transmitter:
Sesebediswa sena se kopana le ho se amohelwe meeding ya ditlhahlobo e tlwaelehileng karolong ya 2.5 ya RSS 102 le ho dumellana le kgahlamelo ya RSS 102 RF, basebedisi ba ka fumana tlhahisoleseding ya Canada mabapi le kgahlamelo ya RF le boikamahanyo.
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a Canada e behiloeng bakeng sa tikoloho e sa laoleheng. Sesebelisoa se kentsoe mme se sebetsoa ntle le thibelo.

Lipotso tse atisang ho botsoa (FAQ)

How do I change the data collection interval?
You can set the data collection time from 1 minute to 1440 minutes by adjusting the settings on the device.
What should I do if I receive a low voltagke alamo?
Ha o amohela molumo o tlasetage alarm, consider replacing or recharging the battery to ensure uninterrupted operation of the device.

Nka etsa joang view the stored data from the transmitter?
You can read out the stored data from the transmitter through a USB connection for further analysis and monitoring.

Litokomane / Lisebelisoa

TZONE TZ-Tag08 LoRa Wireless Temp Sensor [pdf] Bukana ea Mosebelisi
TS3, 2BHCF-TS3, 2BHCFTS3, TZ-Tag08 LoRa Wireless Temp Sensor, TZ-Tag08, LoRa Wireless Temp Sensor, Wireless Temp Sensor, Temp Sensor, Sensor

Litšupiso

Bukana ea Mosebelisi

TZONE TZ-Tag08 LoRa Wireless Temp Sensor

Tlhahisoleseding ya Sehlahiswa

Litaelo tsa Tšebeliso ea Sehlahisoa