R1 Smart Motion Sensor
“
Litlhaloso
- Name: Smart Motion Sensor R1
- Mohlala: R1
- Litekanyo: N/A
- Tshebetso VoltagE: N / A.
- Mofuta oa Betri: Ha o na
- Khafetsa ea Mosebetsi: Ha ho na
- Working Condition: N/A
- Sebaka sa Mocheso o Sebeletsang: Ha ho na
Tlhaloso ea Sehlahisoa
The Smart Motion Sensor R1 is a wireless motion sensor designed
to detect movement within a specific range. It features adjustable
sensitivity levels and LED indicators to provide real-time feedback
on motion detection.
Litaelo tsa Tšebeliso ea Sehlahisoa
Tlhophiso
- Open the battery cover and remove the insulation strip to power
sesebelisoa. - If not in pairing mode, press and hold the + button for 10
seconds to factory reset. - Follow platform instructions to add the device.
Using Case
- Place the sensor in a suitable location away from interference
mehloli. - Adjust sensitivity level (1-5) based on sensing distance.
- Set up routines on the platform using the sensor as a
qhoqhoa.
Ho kenya
The sensor can be placed on a table or mounted on a wall using
lisurufu.
- E behiloe tafoleng
- E fanyehe leboteng
Ho batle phoso
To optimize detection accuracy:
- Avoid installing on metal surfaces; use insulating layers if
hlokahala. - Keep the sensor away from strong signal fields of other
lisebelisoa tse se nang mohala. - Avoid placing multiple sensors with detection surfaces opposite
e mong le e mong.
LBH
Q: How do I adjust the sensitivity level of the R1 sensor?
A: The sensitivity level can be adjusted by pressing the +/-
buttons on the device. Refer to the user manual for specific
instructions on changing sensitivity levels.
Q: Can I use the R1 sensor with platforms other than those
tse thathamisitsoeng?
A: The R1 sensor is compatible with platforms such as Amazon
SmartThings, Home Assistant, Hubitat, ThirdReality, Homey, and
Aeotec. For optimal functionality, it is recommended to use with
these supported platforms.
"`
Sensor ea Smart Motion R1
Tataiso ea ho Qala ka Potlako
Tlhaloso ea Sehlahisoa
The THIRDREALITY Motion Sensor R1 is the perfect companion for a smarter, more secure home. Seamlessly integrating with popular Zigbee hubs like Echo devices with built-in Zigbee hubs, SmartThings, and Home Assistant, it fits effortlessly into your existing setup. Imagine customizing its detection range from 1.5 to 9.5 meters to monitor your living room, hallway, or office just the way you need. With three AA batteries, the sensor delivers long-lasting performance up to 3 years in typical use, so you can focus on what’s important without constant maintenance. Set up routines via compatible apps to turn on lights as you enter a room or receive instant alerts when motion is detected, adding convenience and peace of mind. Whether placed discreetly on a shelf or mounted on a wall, the Motion Sensor R1 adapts to your space, keeping your home connected and secure.
Litlhaloso
Name Model Dimensions Operating Voltage Mofuta oa Battery Ho sebetsa Hangata Boemo ba ho sebetsa Boemo ba ho sebetsa ka mocheso oa mocheso
Smart Motion Sensor R1 3RSMR01067Z 2.56 inch×1.18 inch×2.56 inch DC 4.5V AA battery × 3 (included) Zigbee 3.0 : 2.4GHz, Radar : 5.8GHz Indoor Use Only Default 0~40 (indoor)
Detect Level & Range
Boemo ba 1 2 3 4 5
Range (m/inch) 1.5 / 59 3.5 / 138 5.5 / 217 7.5 / 295 9.5 / 374
01
Mesebetsi ea konopo
Reset (+) LED (-)
Function Reset Indication Enhance sensitivity En/Disable motion detect light Decrease sensitivity
Procedure Press and hold for 10 seconds Click once Press and hold for 3 seconds Click once
Boemo ba LED
Operation Factory Reset Pairing Motion detected
Offline Low Battery
Description The LED is illuminated. The LED flashes rapidly. When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second. The LED flashes once every 3 seconds. The LED flashes twice every 5 seconds.
*The sensitivity indicator light will be reused with the status indicator light.
02
03
Tlhophiso
1. Open the battery cover on the device and remove the insulation strip to power the device.
2. When the device is powered on, the sensitivity indicator will flash rapidly and the device will enter the Zigbee pairing mode. If the sensor is not in the pairing mode, press and hold the + button for 10 seconds to factory reset the sensor.
3. Follow the instructions on the platform to add the device.
Li-platform tse lumellanang
Platform Amazon SmartThings Home Assistant Hubitat ThirdReality Homey Aeotec
Requirement Echo with built-in Zigbee hub 2015/2018 models, Station ZHA and Z2M with Zigbee dongle With Zigbee hub Smart Hub/Smart Bridge MZ1 Homey Bridge/Pro Aeotec Hub
04
Using Case
1. Hang or place the R1 sensor in a suitable and sturdy location. This location should be away from the wireless router and places where there may be slight vibrations (such as washing machines). If there are multiple R1 sensors, avoid overlapping sensing areas to cause false alarms.
2. After completing the installation, you should first adjust the sensor’s sensitivity. There are 5 sensitivity levels from low to high, represented by numbers 1-5. Please try the sensing distance from level 3 (The default is level 3). If the sensing distance is too close, you can switch to a higher level, otherwise you should adjust to a lower level. The sensitivity and LED indicator switch can only be adjusted on the device.
3. Start setting the routine. The R1 sensor is the same as the Wireless Motion sensor. You can select the R1 sensor as the trigger on the platform, and then set some switches or devices as reactors. When the device is triggered, the indicator light for the current sensitivity level will illuminate for 1 second.
05
Ho kenya
Sehlahisoa se na le sebopeho se khahlanong le ho thella, se lumellang hore se behoe ka ho toba tafoleng kapa ho kenngoa leboteng ho sebelisa li-screw.
Buckle
1 Vertically placed on table
2 Hang on the wall 06
Ho batle phoso
To achieve the desired detection accuracy: Do not install the sensor on a metal surface. If you need to install it, please place a non-metallic insulating layer (e.g. plastic or rubber pad, >5mm thick) between the radar and the metal surface. When installing the sensor, please keep it at least 1m away from other wireless devices that will create a strong signal field (e.g. Wireless router). When installing multiple radar sensors, do not place the detection surfaces opposite each other.
Hlakola khoutu ea QR ho view lintlha
https://bit.ly/3PdGajZ 07
FCC Regulatory Conformance
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
Liphetoho kapa litokiso tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
ELA HLOKO: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
08
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help important announcement. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Polelo ea Tšusumetso ea Mahlaseli
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane 20cm lipakeng tsa radiator le 'mele oa hau. Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.
09
Polelo ea ISED
Sesebediswa sena se dumellana le maemo a laesense ya Boqapi, Saense le Ntshetsopele ya Moruo ya Canada ntle le(di)laesense ya RSS. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
(1) sesebelisoa sena se ke ke sa baka tšitiso, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Le présent appareil est confrome aux CNR d’ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil le doit pas imvelisoire de brouillage, et (2) l'utilisateur de l'appareil doit acceptpter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en oeuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pastteteurs antenutés coexister oeuvre de ce matériel devrait.
Tiisetso e Lekanyelitsoeng
For limited warranty, please visit https://3reality.com/faq-help-center/ For customer support, please contact us at info@3reality.com or visit www.3reality.com For questions on other platforms, visit the corresponding platform’s application/support platform.
10
11
11
Litokomane / Lisebelisoa
 |
THIRDREALITY R1 Smart Motion Sensor [pdf] Bukana ea Mosebelisi R1_QSG_20250310, R1, R1 Smart Motion Sensor, R1 Motion Sensor, Smart Motion Sensor, Motion Sensor, Smart Sensor, Sensor |