Think Node M6 Meshtastic Device

Bukana ea Mosebelisi

Boitsebiso ba Tšireletso ea Sehlahisoa

Tlhokomediso ya Mollo: Observe safety instructions and compliant operation, otherwise it may cause fire, electric shock or other injuries.
Tlhokomediso ya ho kgama: The product or gadgets inside the package present a risk of causing or contributing to asphyxiation.

The product has some waterproof function and is suitable for outdoor use. However, the product does not support underwater use, in order to prevent electric shock exposure:

• Do not immerse the solar panel underwater;
• Do not spill food or drink on the solar panel;
• Do not put oil or corrosive liquid in contact with the solar panel;
• Do not place the solar panel in an extremely humid environment,
• Do not use external heating equipment to dry the solar panel;
• Do not use a high-pressure water gun to rinse the solar panel:
• Do not use or touch the solar panel in lightning or thunderstorms;
• If your solar panel is damaged or cracked, stop using it immediately.
• Please use the accessories supplied with the product or those designed specifically for this product. The use of other third-party accessories may affect the performance of the device.
• If you want to use third-party accessories, please be sure to read all product warnings before using them.

For information on compatibility of your device, please consult our information channels or contact our specialized technicians.

Tokisetso ea ho kenya

Please refer to the following recommendations before installation, so that the solar panels can work more efficiently.

a: Choose a suitable orientation for installation.
If you are in the Northern Hemisphere, install the solar panels facing south,

If you are in the Southern Hemisphere, install the solar panel facing north.

b: Do not install the solar panels in an environment where there are objects covering the solar panels, so as not to affect the conversion of the solar panels.

Ho kenngoa ha Liphanele tsa Letsatsi

a: Bracket fixing
Select the appropriate tool to securely fasten the bracket to the wall at the desired installation location.

b: Mating solar panels to racking.

Tlhaloso ea Mosebetsi

Tlhaloso ea Konopo

Lebitso	Mokhoa oa Ts'ebetso	Mosebetsi
Konopo ea Mosebetsi	Penya habeli	Update node/device location information
	Penya habeli	Turn GPS on/off
	Press and hold for 5 seconds.	Bulela/tima sesebelisoa
Seta Botjha Konopo	Tlanya ha 'ngoe	Reset the device; a restart is required

Tlhaloso ea Leseli la Leseli

Lebitso	Boemo	Tlhaloso	Blink Frequency
PWR (Bokhubelu)	Matla On	The red light stays on for 10 seconds.
	Matla Off	It blinks 5 times.	Fast blink(1 Hz).
	Letšoao la ho tjhaja	When the device is charging via USB or solar power (when exposed to light), the indicator light stays on.
	Tlhokomeliso ea Battery e Tlase	A low battery warning is triggered when the power is s 3.3V.	Slow blink (0.5 Hz).
DATA (Blue)	Sending /Receiving Data	When the device is sending or receiving LoRa data, it blinks twice.	Fast blink (1 Hz).

Litlhaloso tsa Sehlahisoa

Module: nRFLR1262
Bluetooth: Bluetooth Low Energy/Bluetooth 5.4
LoRa: US 915MHz/EU 868MHz (External Antenna)
Mofuta oa Battery: 18650 Li-ion Battery
Bokhoni ba Betri: 7000mAh
Dimensions: 210 x 156 x 42mm (excluding antenna & bracket)
Boima ba 'mele: 533.1g
Tekanyetso ea Tšireletso: IP65
Mocheso oa ho sebetsa: -20°C ho ea ho +60°C
Mocheso oa polokelo: -30°C ho ea ho +70°C
Main Board Input: 5V1A
Solar Panel Output: Rated power 6W output

Lenane la ho paka

Solar Panel (M6) x 1
Bracket x 1
Screw Pack 1
USB-A to USB-C × 1
LoRa Antenna x 1
GPS Antenna x 1
Buka ea mosebelisi x 1

Lipotso Tse Botsoang Hangata

1: Why do solar panels charge slower and slower after a period of normal use?

-Solar panels are suitable for outdoor installation, after al period of time the surface of solar panels may be covered with dust, debris, etc. will affect the efficiency of solar energy conversion, Please clean the surface of the solar panel regularly.

2: Are solar panel products waterproof?

-The equipment is suitable for outdoor, is with certain waterproof function, but not suitable for use underwater, also can not use high-pressure water gun rinse equipment, avoid some corrosive liquid or material touch,

3: What is the purpose of these two sensor interfaces?

-Two SP11 model sensor interfaces are reserved, allowing users to connect external sensors for UART and IIC sensor communication.

Hlokomela: After using the sensor interface and USB interface, please remember to cover the waterproof cap to prevent water from entering the device and affecting its use.

Tšehetso ea Bareki

Haeba u na le lipotso, tšehetso ea bareki e lula e eme.
info@elecrow.com
techsupport@elecrow.com
Bakeng sa lintlha tse ling tsa tekheniki, ka kopo etela tse amanang webleqephe.

TLHOKOMELISO FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Liphetoho leha e le life kapa liphetoho tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa ho lumellana le melaoana li ka senya matla a mosebedisi a ho sebelisa thepa.
HLOKOMELA: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.

• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.
• To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Manufacturer: Elecrow
E entsoe chaena

Litokomane / Lisebelisoa

ThinkNode M6 Meshtastic Device [pdf] Bukana ea Mosebelisi M6, M6 Meshtastic Device, Meshtastic Device, Device

Litšupiso

• Bukana ea Mosebelisi