Ti3230en
PDH- Series (V&T),
Taelo ea Theknoloji
Sensora ea lebelo la moea le mocheso
e nang le Active Output
PDI1- Series Sensor ea Lebelo la Moea le Mocheso
PDI1-Series (V&T) e etselitsoe ho lekanya lebelo la moea le mocheso lits'ebetsong tsa HVAC
Mekhahlelo ea ho lekanya e khethiloe sebakeng le liphetho tsa sensor
Khetha Mekhahlelo e methang ea Velocity e mengata
Khetho e nang le LCD le tlhahiso ea relay e fumaneha
Pontšo ea LCD ea boikhethelo e teng.
Sensor e sebetsa ka matla a fokolang
Liphetho tsa taolo li sebetsa.
SEBELISA
E lumellana le litsamaiso tsohle tse tloaelehileng tsa HVAC DDC le Analog Controls, tse nang le/ntle le Setsi sa Moaho oa Boiketsetso
Tekanyo e fapaneng ea khatello ho litsamaiso tsa HVAC
Ho beha leihlo moea dampba tsamaisong ea mantlha kapa ea bobeli ea taolo
Tlhokomelo ea boemo ba ho futhumatsa / ho pholisa li-coil, ho thibela mocheso o feteletseng / leqhoa
Featured
Sensor e nang le diphoelo tse sebetsang
Mekhahlelo ea ho metha e ka khethoang ka hare le liphetho tsa sensor
Ke khetho e nang le LCD-backlight display
Ho ea ka boikhethelo ka tlhahiso ea relay e feto-fetohang
Sehlahisoa sa setsebi le se sebetsang, se mamella maemo a thata a tikoloho
Ho bonolo ho e sebelisa, ho kenya le ho hlokomela
Mefuta e fapaneng ea lihlahisoa
| Likhoutu tsa Odara | Phepelo ea motlakase | Litholoana tsa Sensor | Mekhahlelo ea ho lekanya | Pontšo | Relay Output | Tshireletso |
| PD11.AA | AC/DC 24V ±10% | 0….10V* or 4….20mA |
0…50°C 0…2m/s 0…10m/s* 0…20m/s |
n/a | n/a | IP54 |
| PD11.BA | LCD | n/a | ||||
| PDI1.CA |
LCD
|
Relay (STDP) |
* Boleng ba kamehla
Tlhaloso ea Sensor
| Tlhaloso ea Sensor | Lekanngoa | Mocheso / Phallo ea moea |
| Litšobotsi tsa Sensor | E sebetsa / E sebetsa | |
| Sensor Output (s) | 0..10V (min 1k Q) kapa 4…20mA (min. 0.4kQ) | |
| Ho nepahala (T) | <0.2m/s +5% ea boleng ba sebele | |
| Ho nepahala (v=0…2m/s) | <0.5m/s +5% ea boleng ba sebele | |
| Measuring Range (v) | 0…10m/s /0..50°C | |
| Boikhethelo ba ho Methara (v) | 0…2m/s; 0…20m/s | |
| Sensora ea Mocheso | 0…50°C |
Boitsebiso ba Theknoloji
| Boitsebiso ba Motlakase | Phepelo ea motlakase | AC/DC 24V (10%) |
| Khafetsa | 50/60 Hzat AC 24V | |
| Theminale Clamp | Screw terminal, max. 1.5 limilimithara | |
| Tšebeliso ea Matla | , max. 125mA | |
| Phetolelo ea Relay | AC 250V, max 6A; DC 30V, max. 6A | |
| Boitsebiso ba Mechini | Lere la ho qoelisoa bophara | @10mm |
| Bolelele ba Molamu oa ho qoelisoa | 195 limilimithara | |
| Keno ea Cable | Ho kenoa habeli, 2 x M16, @6…28mm likhoele | |
| Sensing Element Boemo | extemal, bokahodimo ba molamu wa ho inela | |
| Khetho ea Range | Jumper e fetoha ka hare ho ntlo | |
| Mosebelisi | Pontšo | LCD-backlit (45.7×12.7mm) |
| Mmala le Lisebelisoa | Sekoahelo sa Matlo | PC, bohlooho |
| Housing Bottom | ABS, bohlooho | |
| Notlela | Snap Connector | |
| Cable Glanc | Grey ABS | |
| Gland Rubber S | Rabara e Ntšo | |
| Karolo ea mosebelisi | Li-Jumpers tse Nkoang | |
| Molamu oa ho qoelisoa | US: AISI 304; EU: EN X 6 CrNi 18 10; GER: WN 1.301 | |
| Maemo a Tikoloho | Mocheso oa Ts'ebetso | 0°C…+50°C |
| Opereishene Mongobo | <95% rh, ha ho condensation | |
| Mocheso oa Lipalangoang | -35°C…+70°C | |
| Mongobo oa Lipalangoang | <95%rh. | |
| Mocheso oa polokelo | -10°C…+70°C | |
| Mongobo oa polokelo | <85% rh, ha ho condensation | |
| Litloaelo le Litaelo | IP- Rating | IP54 ho IEC6052 |
| Sehlopha sa Tšireletseho | 1l ho isa ho EN 60 730 | |
| Maemo a Sehlahiswa 1 | Motlakase oa Motlakase. Litaolo bakeng sa tšebeliso ea malapa le tse tšoanang | |
| Maemo a Sehlahiswa 2 | 2009/EN 60 730-1 | |
| Litekanyetso tsa CE ho | 2004/108/EG Electromagnetic Compatibility EMV' | |
| LVD Directive | 2014/35/EU | |
| Tšebelisano ea RoHS | RoHS 3, Taelo ea 2015/863 | |
| Tataiso ea WEEE | 2012/19/EU | |
| Operation Boemo ba Tlelaemete | Tlhaloso: IEC 60721-3-3 | |
| Operation Mechanical Condition | IEC 60 721-3-2 ho sehlopha sa 2M2 | |
| Lipalangoang ho ea Boemong ba Tlelaemete | IEC 60 721-3-2 | |
| Boemo ba Mechini ea Lipalangoang | IEC 60 721-3-2 ho sehlopha sa 2M2 | |
| Boemo ba Tlelaemete ba polokelo | IEC 60 721-3-1 | |
| Boemo ba Mechini ea polokelo | IEC 60 721-3-1 ho sehlopha sa 2M2 |
Tse fapaneng
| Lisebelisoa | Mounting Kit, E kenyelelitsoe ho pepa | Duct Mounting flange |
| Shipping & Ho sebetsana | Bonyane Taelo | 1 lebokose le nang le sengoathoana se le seng |
| Thepa ea Sephutheloana | Packaging ea li-cardboards tse thata | |
| Oda Lintlha | Khoutu ea Odara | Sheba Mefuta ea Lihlahisoa, Leqephe la 1, mohlala, PDI1.AA |
Mounting Taelo
LITLHARE 
LITŠOANTŠISO TŠOANE
KEKETSO
- Kenya sesebelisoa sebakeng se lakatsehang (sheba mohato oa 1).
- Bula sekwahelo 'me u tsamaise thapo ka har'a thapo ea khatello ebe o hokela lithapo ho block block (sheba mohato oa 2). Sebelisa thapo e ikhethileng bakeng sa thapo e 'ngoe le e 'ngoe.
- Sesebelisoa se se se loketse ho hlophisoa.
TLHOKOMELISO: Kenya matla feela ka mor'a hore sesebelisoa se kenngoe hantle.
MOHATO 1: HO PHAHAMA SESEBETSI
- Khetha sebaka sa ho kenya (ka duct).
- Sebelisa flange e ntseng e hola ea sesebelisoa joalo ka thempleite 'me u tšoaee masoba a screw.
- Beha flange holim'a duct ka li-screws (tse sa kenyelletsoeng). (Setšoantšo sa 1a)
- Fetola probe ho botebo bo lakatsehang. Netefatsa hore pheletso ea probe e fihla bohareng ba kotopo. (Setšoantšo sa 1b)
- Tobetsa screw holim'a flange ho tšoara probe boemong.
MOHATO 2: LITŠOANTŠISO TSA LIKHOPO
Ho latela melao ea CE, ho hlokahala thapo e sireletsang e thehiloeng hantle.
- Hlakola ho fokotsa khatello 'me u tsamaise lithapo. Sebelisa ho imoloha ha khatello ka letsohong le letšehali bakeng sa matla a ho kena le ho tsoa (Tout/vout) le ho imolla khatello ka ho le letona bakeng sa ho fetisa.
- Hokela lithapo joalokaha ho bontšitsoe setšoantšong sa 2a le 2b.
- Tiisa khatello ea maikutlo.
TIISETSO
- Khetha mofuta oa tekanyo o lakatsehang (sheba mohato oa 3).
- Khetha mokhoa o lakatsehang oa ho metha (sheba mohato oa 4).
- Hlophisa relay (ho ikhethela) (sheba mohato oa 5).
Hona joale sesebelisoa se se se loketse ho sebelisoa.
MOHATO 3: HO KHETHA LEFUTA LA LITEKISO
Khetha mefuta ea litekanyo ka ho kenya li-jumpers joalokaha ho bontšitsoe setšoantšong sa 3a. (Sheba setšoantšo sa 3a-3b - Litlhophiso tsa Jumper)
HO KHETHA LEFUBA LA LITEKISO TSOELA PELE 
MOHATO 4: HO KHETHA MOKHOA OA HO LEKOLA
Lokisa liphetho:
- Mocheso o hlahisoang ke mocheso (Tout)
- Velocity output (vout)
Khetha tlhahiso moddseurrent (mA) kapa voltage (V), ka ho kenya li-jumpers joalokaha ho bontšitsoe setšoantšong sa 4. Liphetho ka bobeli, mocheso (T) le velocity (v), li hlophisitsoe ka thoko.
MOHATO 5: HO HLOMELA MOHLALA OA RELAY RELAY HO BUA
- Sebaka sa ho fetoha (ho hlokahala pontšo)
• Kenya jumper ho lithakhisa tse ngotsoeng sw.p. (ho fetoha ntlha). (Sheba setšoantšo sa 5)
• Tobetsa konopo ea ho sututsa ho khetha ntlha ea ho chencha (mohlala, 5,05 m/s = NC) ea relay. Boleng bo khethiloeng (m/s) bo bontšoa skrineng.
• Tlosa le ho boloka jumper ka mor'a hore tlhophiso e phethoe. - Hysteresis (ho hlokahala pontšo)
• Kenya jumper ho lithakhisa tse ngotsoeng hyst. (hysteresis). (Sheba setšoantšo sa 5)
• Tobetsa tlase konopo ho khetha hysteresis ea sebaka sa ho chencha relay. Boleng bo khethiloeng (/) bo bontšoa skrineng.
• Tlosa le ho boloka jumper ka mor'a hore tlhophiso e phethoe.
HLOKOMELA! Li-jumpers tsa tlhophiso ea li-relay li tlameha ho tlosoa le ho bolokoa bakeng sa ho nepahala ts'ebetso.
HSTERESIS
Hysteresis e emela sebaka se shoeleng se ka tlase ho kapa se lekanang le 20% ea mefuta e khethiloeng. The hysteresis e tiisitsoe sebakeng sa ho fetoha (sw.p), ho fetela ho hysteresis range e khethiloeng.
Ho exampLe switching point e behiloe ho 1,5 m/s, 'me hysteresis e behiloe ho 0,25 m/s. Ha lebelo le ntse le eketseha ho feta 1,5 m/s, relay e tla bula/e koale. Ha lebelo le fokotseha, relay e ke ke ea koala / ea buleha ho fihlela lebelo le feta 1,25 m / s, kahoo ho thibela ho palama baesekele ka potlako.
TSIETSO TS'ELISO 
Boemo ba hysteresis maximum bo ipapisitse le mefuta e khethiloeng.
RECYCLE/ LAHLEO
Likarolo tse setseng ho kenngoeng li lokela ho sebelisoa hape ho latela litaelo tsa sebaka sa heno.
Lisebelisoa tse khaotsoeng li lokela ho isoa sebakeng sa ho sebelisoa hape se sebetsanang ka ho khetheha le litšila tsa elektroniki.
TIISETSO LEANO
Morekisi o tlamehile ho fana ka tiisetso ea lilemo tse hlano bakeng sa thepa e fanoeng mabapi le thepa le tlhahiso. Nako ea tiisetso e nkoa e qala ka letsatsi la thomello ea sehlahisoa. Haeba ho fumanoa sekoli thepa e tala kapa bofokoli ba tlhahiso, morekisi o tlamehile, ha sehlahisoa se romelloa ho morekisi ntle le tieho kapa pele tiisetso e fela, ho lokisa phoso ka boikhethelo ba hae, ebang ke ka ho lokisa thepa. sehlahiswa se nang le sekodi kapa ka ho isa mahala ho moreki sehlahiswa se secha se se nang sekodi le ho se romela ho moreki. Litšenyehelo tsa thomello bakeng sa tokiso tlas'a tiisetso li tla lefshoa ke moreki le litšenyehelo tsa ho khutlisa ke morekisi. Tiisetso ha e kenyeletse tšenyo e bakiloeng ke kotsi, lehalima, likhohola kapa ketsahalo e 'ngoe ea tlhaho, ho roala le ho taboha ho tloaelehileng, ts'ebeliso e sa nepahalang kapa e sa tsotelleng, ts'ebeliso e sa tloaelehang, phallo e feteletseng, polokelo e fosahetseng, tlhokomelo e fosahetseng kapa kaho bocha, kapa liphetoho le mosebetsi oa ho kenya. ha e etsoe ke morekisi. Khetho ea lisebelisoa bakeng sa lisebelisoa tse atisang ho senyeha ke boikarabello ba moreki, ntle le haeba ho se joalo ho lumellanoe ka molao. Haeba moetsi a ka fetola sebopeho sa sesebelisoa, morekisi ha a tlamehe ho etsa liphetoho tse ka bapisoang le lisebelisoa tse seng li rekiloe. Ho etsa boipiletso bakeng sa tiisetso ho hloka hore moreki a phethile mesebetsi ea hae ka nepo ho tsoa ho phano le ho boletsoe konteraka. Morekisi o tla fana ka tiisetso e ncha bakeng sa thepa e nchafalitsoeng kapa e lokisitsoeng ka har'a tiisetso, leha ho le joalo feela ho fihlela pheletso ea nako ea tiisetso ea sehlahisoa sa mantlha. Tiisetso e kenyeletsa ho lokisoa ha karolo kapa sesebelisoa se nang le bothata, kapa ha ho hlokahala, karolo e ncha kapa sesebelisoa, empa eseng litšenyehelo tsa ho kenya kapa ho fapanyetsana. Ha ho maemo afe kapa afe moo morekisi a ikarabellang bakeng sa matšeliso bakeng sa tšenyo e sa tobang.
Themokon Asia Pacifc
Lintlha tsa Fiomation le Techrical li tlas'a maemo a 1o aeraton
PDI- Series (vaT) V231
Litokomane / Lisebelisoa
 |
thermokon PDI1- Series Air Velocity le Mocheso Sensor [pdf] Litaelo PDI1- Series Sensor ea Moea le Mocheso, PDI1- Letoto, Sensor ea Lebelo la Moea le Mocheso, Sensor ea Mocheso, Sensor |