Thermokon CRC9 Series Ceiling Humidity le Mocheso Sensor
Tlhahisoleseding ya Sehlahiswa
CRC9- Series (H&T) ke mongobo oa siling le sensor ea mocheso e etselitsoeng ho lekanya mocheso, mongobo o lekanyelitsoeng, mongobo o felletseng, enthalpy kapa phoka ka likamoreng kapa libakeng. E na le liprothokholo tsa puisano tsa BACnet / Modbus RTU mme e loketse ho sebelisoa ho aha litsamaiso tsa othomathike. Sensor e ka nkeloa sebaka 'me e sebetsa ka matla a tlase. E khona ho mamella maemo a thata a tikoloho ka lebaka la karolo ea eona e phahameng ea sensor e sirelelitsoeng.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho sebelisa sensor ea CRC9- Series (H&T), latela mehato ena:
- Khetha protocol e nepahetseng ea puisano (BACnet MSTP kapa Modbus RTU) ho latela litlhoko tsa sistimi ea moaho oa hau.
- Kenya sensor sebakeng se lakatsehang, ho netefatsa hore e behiloe ka mokhoa o sireletsehileng 'me e behiloe ka nepo.
- Hokela sensor ho phepelo ea motlakase u sebelisa terminal e fanoengamp.
- Lokisa sensor ho lekanya phapang e lakatsehang (mocheso, mongobo o lekanyelitsoeng, mongobo o felletseng, enthalpy, kapa ntlha ea phoka).
- Lekola tlhahiso ea sensor ka puisano ea BACnet MSTP / Modbus RTU.
- Haeba ho hlokahala, fetola sensor tšimong u sebelisa sebaka se lumellanang.
Hlokomela: Sensor ea CRC9- Series (H&T) e loketse ho sebelisoa lits'ebetsong tsohle tse tloaelehileng tsa HVAC mme e ka sebelisoa meahong ea khoebo le ea indasteri. E fana ka ho nepahala ha mongobo o phahameng 'me e na le moralo oa lihlahisoa tsa morao-rao le tse sebetsang. Ho bonolo ho e sebelisa, ho kenya le ho hlokomela.
Boitsebiso ba Theknoloji
Mongobo oa siling le Mocheso oa Sensor e nang le puisano ea BACnet / Modbus RTU
- CRC9- Series (H&T) e etselitsoe ho lekanya mocheso, mongobo o lekanyelitsoeng, mongobo o felletseng, enthalpy kapa phoka ka likamoreng kapa libakeng.
- Sensor e ka nkeloa sebaka
- Sensor e sebetsa ka matla a fokolang
- Sensor e mamella maemo a thata a tikoloho ka lebaka la karolo e phahameng e sirelelitsoeng ea sensor
- BACnet MSTP le Modbus RTU ka Botong
- Phallo ea sensor e hlahisoa ka puisano ea BACnet MSTP / Modbus RTU
Sebelisa
Ho Sistimi ea Boiketsetso ea Moaho moo ho sebelisoang liprothokholo tsa puisano tsa BACnet MSTP kapa MODBUS RTU Mongobo o amanang, mongobo o felletseng, enthalpy kapa phoka le tekanyo ea mocheso likotopong tsa moea.
- E sebelisoa maemong a thata ka lebaka la IP67 e sirelelitsoeng ea sensor element, ntle le tšusumetso ho nepahala kapa nako ea ho lekanya E sebelisoa lits'ebetsong tsohle tse tloaelehileng tsa HVAC.
- E sebelisoa Meahong ea Khoebo le ea Liindasteri
Likaroloana
- Tlhahiso ea sensor ka puisano ea BACnet MSTP / Modbus RTU
- Protocol e ikhethileng ea puisano
- Sensor e ka nkeloang sebaka
- Ho nepahala ha Mongobo o Phahameng
- Sehlahisoa sa mehleng ea kajeno le se sebetsang
- Ho bonolo ho e sebelisa, ho kenya le ho hlokomela
Mefuta e fapaneng ea lihlahisoa
|
Likhoutu tsa Odara |
Bolelele ba Cable |
Mokhoa oa puisano |
Phepelo ea motlakase |
Ho lekanya ho feto-fetoha |
Mekhahlelo ea ho lekanya |
Ho nepahala |
Tshireletso |
|
AC/DC 24V (±10%) |
rel. mongobo |
0...100% |
|||||
| CRC9.BA | 2m | BACnet MSTP | |||||
| mongobo o felletseng
mongobo o felletseng |
0…50gr/m3
-20….80°C |
± 2%, Sekala se Felletseng |
IP20 |
||||
| CRC9.BG | 2m | Modbus RTU | |||||
| enthalpy | 0…85kJ/Kg |
Tlhaloso ea Sensor
|
Tlhaloso ea Sensor |
Tlhaloso ea Sensor | Lekanngoa
Litšobotsi tsa Sensor Litšobotsi tsa H/T Ho nepahala ho lekanyelitsoeng mongobo o feletseng mongobo enthalpy phoka Mocheso IP- Rating sensor element Pheta-pheta (H) Measuring Range (H) ea Nako e Telele (H) Measuring Range (T) (default) |
Mocheso le Mongobo lia sebetsa
BACnet MSTP kapa puisano ea Modbus RTU, RS485
± 2% ho feta tekanyo ea ho lekanya
± 2% ho feta tekanyo ea ho lekanya
± 2% ho feta tekanyo ea ho lekanya
± 2% ho feta sebaka sa ho lekanya bona chate, leqepheng la 4 IP67 ho IEC60529
±0.1C̊ ; ± 0.1% rh
<0.04C̊ / selemo; <0.5% rh / selemo sheba lichate leqepheng la 4 -40⁰C…120⁰C |
|
|
Boitsebiso ba Theknoloji |
Boitsebiso ba Motlakase | Phepelo ea motlakase | AC/DC 24V (±10%) | |
| Khafetsa | 50 / 60 Hz ho AC 24V | |||
| Theminale Clamp | Screw terminal, max. 1.5 limilimithara tse ² | |||
| Tšebeliso ea Matla | ≤ 1W @ AC 24V / DC 24V | |||
| Boitsebiso ba Mechini | Bolelele ba Cable | 2m | ||
| Bophara ba Moeta-pele oa Cable | Ø0.25mm | |||
| Diameter ea Cable | 4.6 limilimithara | |||
| Sensing Element Boemo | kantle, kaholimo ho pokotho ea kutlo | |||
| Sensor Housing | Ø30mmx37mm | |||
| Sensor / Khokahanyo ea bolulo | Khokahano ea "screw-on" ea M12 | |||
| Mmala le Lisebelisoa | Sekoahelo sa Matlo | White ABS, RAL9001 (Cream White) | ||
| Housing Bottom | White ABS, RAL9001 (Cream White) | |||
| Notlela Screw | US: AISI 304; EU: EN X 6 CrNi 18 10; GER: WN 1.301 | |||
| Notlela Linate | Koporo | |||
| Sensor / Khokahanyo ea bolulo | Alloy ea zink - Nickel e pentiloe | |||
| Cable tšoelesa | White ABS, RAL2002 (Vermilion) | |||
| Setiiso sa Rubber ea Gland | TBS e tšoeu, RAL9010 (Bosoeu bo Hloekileng) | |||
| Tšireletso Caps | White ABS, RAL2002 (Vermilion) | |||
| Maemo a Tikoloho | Mocheso oa Ts'ebetso | -25⁰C…+70⁰C | ||
| Opereishene Mongobo | <85% rh, ha ho condensation | |||
| Mocheso oa Lipalangoang | -35⁰C…+70⁰C | |||
| Mongobo oa Lipalangoang | <90% rh | |||
| Mocheso oa polokelo | -10⁰C…+70⁰C | |||
| Mongobo oa polokelo | <85% rh, ha ho condensation | |||
| Litloaelo le Litaelo | IP- Rating | IP20 ho IEC60529 | ||
| Sehlopha sa Tšireletseho | III ho isa ho EN 60 730 | |||
| Maemo a Sehlahiswa 1 | Motlakase oa Motlakase. Litaolo bakeng sa tšebeliso ea malapa le tse tšoanang | |||
| Maemo a Sehlahiswa 2 | 2009/EN 60 730-1 | |||
| Litekanyetso tsa CE ho | 2004/108/EG Electromagnetic Compatibility EMV | |||
| Khokahano ea CE Electromagnetic Emitted Interference | 2000/EN60730-1 Tšitiso e Emited | |||
| CE Electromagnetic Compatibility Interference resistance | 2000/EN60730-1 Ho hanyetsa Tšitiso | |||
| Tšebelisano ea RoHS | RoHS 3, Taelo ea 2015/863 | |||
| Operation Boemo ba Tlelaemete | IEC 60 721-3-3 | |||
| Operation Mechanical Condition | IEC 60 721-3-2 ho sehlopha sa 2M2 | |||
| Lipalangoang ho ea Boemong ba Tlelaemete | IEC 60 721-3-2 | |||
| Boemo ba Mechini ea Lipalangoang | IEC 60 721-3-2 ho sehlopha sa 2M2 | |||
| Boemo ba Tlelaemete ba polokelo | IEC 60 721-3-1 | |||
| Boemo ba Mechini ea polokelo | IEC 60 721-3-1 ho sehlopha sa 2M2 | |||
|
Tse fapaneng |
Lisebelisoa tsa ho Romela le ho Tšoara
Oda Lintlha |
n/a
Bonyane Taelo
Packaging Order Code |
n/a
Lebokose le le leng le nang le sengoathoana se le 1 sa Li-cardboards tse thata Sheba Mefuta ea Lihlahisoa, Leqephe la 1, mohlala, CRC9.BA |
|
|
Thermokon Asia Pacific |
Lintlha tsohle le lintlha tsa tekheniki li ka fetoloa
CRC9- Series (H&T) V23.1 |
Leqephe 2/4 |
||
Li-parameter tsa Modbus
|
Li-parameter tsa Modbus |
Nomoro ea Aterese | Ngodisa Tlhaloso | ||
| 0…3 | Nomoro ea letoto | phetolelo ea sebele | ||
| 4 | Software Software | phetolelo ea sebele | ||
| 6 | Aterese ea Modbus | 254 ea kamehla, e ka khethoang 1…254 | ||
| 8 | Hardware Version | phetolelo ea sebele | ||
| 11 | Baud Rate autodetection | 0= HO TLOHA; 1= E butswe | ||
| 15 | Baud Rate, (haeba ho iphumanela ka boits'oaro ho TIMA) | 0= 9600 ; 1= 19.200 ; 2= 38.400 ; 3= 57.600 ; 4= 115.200 | ||
| 34 | Mocheso, digital | boleng ba sebele | ||
| 35 | Tse amanang. Mongobo | boleng ba sebele | ||
| 41 | Dew Point Value, ea sebele | boleng ba sebele | ||
| 42 | Enthalpy Value, ea sebele | boleng ba sebele | ||
| 44 | Absolute Humidity, sebele | boleng ba sebele | ||
| 45 | Mocheso, feela | boleng ba sebele | ||
|
BACnet Parameters |
Ts'ehetsoeng Mefuta ea Lintho tsa BACnet | |||
| analoge-boleng | ||||
| sesebelisoa | ||||
| Litšebeletso tsa BACnet tse tšehelitsoeng | ||||
| mang-ke | ||||
| ke-ke | ||||
|
sesupo sa ntho, lebitso la ntho, mofuta wa ntho, boleng ba hona jwale, diyuniti, lenane la dintho, id ya morekisi, lebitso la morekisi, boemo ba sistimi, tshebeletso e netefaditsweng, ditshebeletso tse sa netefatswang |
||||
| Lintho tsa MSTP | ||||
| analoge-boleng | ||||
| Aterese ea BACnet | 127 ea kamehla, e ka khethoang 0…127 | |||
| AV0 | Baud rate autodetection | ya kamehla 0, 0= TIMA; 1= TSOELA | ||
| AV1 | Baud Rate, (haeba ho iphumanela ka boits'oaro ho TIMA) | 0= 9600 ; 1= 19.200 ; 2= 38.400 ; 3= 57.600 ; 4= 115.200 | ||
|
AV2 |
Boemo ba Mongobo |
0= Ntlheng ea Phoka; 1= Enthalpy ; 2= Mongobo o felletseng; 3= mongobo o lekanyelitsoeng | ||
| AV3 | Protocol | 0= Modbus ; 1= BACnet | ||
| AV4 | Mocheso | boleng ba sebele (-40…120ºC) | ||
| AV6 | Mongobo o Batlang | boleng ba sebele (0…100% rel. Humidity) | ||
| AV7 | Mongobo o felletseng | boleng ba sebele (0…50gr/m3) | ||
| AV8 | Phoka Point | boleng ba sebele (-20…80ºC) | ||
| AV9 | Enthalpy | boleng ba sebele (0…85kJ/kg) | ||
| Sesebelisoa | ||||
| sekhethoa-sesebediswa | ||||
| sesebelisoa-lebitso | ||||
| Ts'ebetso ea "Baud Rate autodetection" e ka sebelisoa feela nakong ea ha sehlahisoa se se se hlophisoa. Ha sehlahisoa se sebetsa le BAS, "Baud Rate autodetection" e tlameha ho behoa ho 0= OFF 'me Baud Rate ea sebele e tlameha ho behoa. | ||||
| Lintlha tsohle le lintlha tsa tekheniki li ka fetoloa | ||||
| Thermokon Asia Pacific | CDI9- Series (H&T) | V23.1 | Leqephe 3/4 | |
Lintlha tsa Tlhophiso
Ela hloko melaoana e latelang ea boenjiniere le ho e kenya tšebetsong:
- Melao eohle e amehang ea naha le ea matla a matla
- Melao e meng e khethehileng ea naha
- Melao e tobileng naha
- Taolo ea taolo ea phepelo ea motlakase ea lehae
- Merero, lethathamo la likhebula, lipehelo, litlhaloso le litlhophiso ho tsoa ho moreki kapa ofisi ea boenjiniere e ikarabellang
- Litlhaloso tsa motho oa boraro, mohlala, likonteraka tse akaretsang kapa lihahi
Mount Advices
Lintlha tsa ho Lahla
Sesebelisoa sena se nkuoa e le sesebelisoa sa elektroniki se ka lahloang ho ea ka EUROPEAN DIRECTIVE 2012/19/EU. Sesebelisoa sena se ka 'na sa se ke sa lahloa e le litšila tsa ka tlung. Sesebelisoa se tlameha ho lahloa ka likanale tse fanoeng molemong ona. Ke tlamo ho ikamahanya le melao le melawana e ntseng e sebelisoa ha joale.
Ho nepahala Curves
Setšoantšo sa Dimensional
Lihokelo & Litlhophiso
| Khokahano ea li-terminals | ||||||
| T1 | T2 | T3 | T4 | T5 | T6 | |
| UB+ | 24V AC / DC | GND | RS485 - C- | RS485 – C+ | nA | nA |
Thermokon Asia Pacific
Lintlha tsohle le lintlha tsa tekheniki li ka fetoloa CRC9- Series (H&T) V23.1
Litokomane / Lisebelisoa
 |
Thermokon CRC9 Series Ceiling Humidity le Mocheso Sensor [pdf] Buka ea Taelo CRC9 Series Mongobo oa Ceiling le Mocheso oa Sensor, Letoto la CRC9, Mongobo oa Siling le Sensor ea Mocheso, Sensor ea Mongobo le Mocheso, Sensor ea Mocheso, Sensor |