BA LAOLI BA TECH EU-M-8N Phanele ea Taolo e se nang Waele

POLOKO

Pele o sebelisa sesebelisoa ka lekhetlo la pele mosebelisi o lokela ho bala melao e latelang ka hloko. Ho se mamele melao e kenyellelitsoeng bukaneng ena ho ka lebisa likotsing tsa motho kapa tšenyo ea molaoli. Bukana ea mosebelisi e lokela ho bolokoa sebakeng se sireletsehileng bakeng sa ho sebelisoa hape. E le ho qoba likotsi le liphoso, ho lokela ho netefatsoa hore motho e mong le e mong ea sebelisang sesebelisoa o tloaelane le molao-motheo oa ts'ebetso hammoho le mesebetsi ea tšireletso ea molaoli. Haeba sesebelisoa se tla behoa sebakeng se fapaneng, etsa bonnete ba hore buka ea mosebedisi e bolokoa le sesebelisoa e le hore mosebedisi leha e le ofe ea ka khonang ho fumana boitsebiso ba bohlokoa ka sesebelisoa. Moetsi ha a amohele boikarabello bakeng sa likotsi leha e le life kapa tšenyo e bakoang ke ho se tsotelle; ka hona, basebelisi ba tlamehile ho nka mehato e hlokahalang ea polokeho e thathamisitsoeng bukaneng ena ho sireletsa bophelo ba bona le thepa ea bona.

TLHOKOMELO

• Sesebelisoa sa motlakase se phelang! Etsa bonnete ba hore molaoli o khaotsoe ho mains pele a etsa mesebetsi efe kapa efe e amanang le phepelo ea motlakase (ho kenya likhoele, ho kenya sesebelisoa joalo-joalo)
• Sesebelisoa se lokela ho kenngoa ke setsebi sa motlakase se tšoanelehang.
• Pele o qala molaoli, mosebelisi o lokela ho lekanya khanyetso ea lefats'e ea li-motors tsa motlakase hammoho le ho hanyetsa ha likhoele.
• Molaoli ha oa lokela ho sebetsoa ke bana.
• Sesebelisoa se ka senyeha haeba se otloa ke lehalima. Etsa bonnete ba hore polaka e khaotsoe phepelong ea motlakase nakong ea sefefo.
• Tšebeliso efe kapa efe ntle le e boletsoeng ke moetsi e thibetsoe.
• Pele le nakong ea nako ea ho futhumatsa, molaoli o lokela ho hlahlojoa hore na boemo ba likhoele tsa oona ke bofe. Mosebelisi o boetse o lokela ho hlahloba hore na molaoli o kentsoe hantle le ho e hloekisa haeba e le lerole kapa e litšila.

Liphetoho tsa thepa e hlalositsoeng bukeng ena e kanna ea hlahisoa kamora hore e phetheloe ka la 22.02.2021. Moetsi o na le tokelo ea ho hlahisa liphetoho ho sebopeho kapa mebala. Lipapiso li ka kenyelletsa lisebelisoa tse eketsehileng. Theknoloji ea ho hatisa e ka 'na ea etsa hore ho be le phapang pakeng tsa mebala e bontšitsoeng.

Re ikemiseditse ho sireletsa tikoloho. Ho etsa lisebelisoa tsa elektroniki ho fana ka tlamo ea ho fana ka ts'ireletso ea tikoloho ea lisebelisoa le lisebelisoa tsa elektroniki tse sebelisitsoeng. Kahoo, re kentsoe rejisetarang e bolokiloeng ke Tlhahlobo ea Tšireletso ea Tikoloho. Letšoao la moqomo o tšetsoeng holim'a sehlahisoa le bolela hore sehlahisoa se se ke sa lahleloa ka har'a lijana tsa litšila tsa ntlo. Ho tsosolosa litšila ho thusa ho sireletsa tikoloho. Mosebelisi o tlamehile ho fetisetsa lisebelisoa tsa hae tse sebelisitsoeng sebakeng sa pokello moo likarolo tsohle tsa motlakase le tsa elektroniki li tla sebelisoa hape.

TLHALOSO SESEBETSI

Taolo ea kamore ea EU-M-8n e reretsoe ho sebelisoa le molaoli oa kantle oa EU-L-8e. E etselitsoe ho laola balaoli ba kamore e ka tlase, li-sensor le li-actuator tsa thermostatic. E romela lipalo tsa mocheso oa hajoale ho tsoa sebakeng se fanoeng. Ho itšetlehile ka lintlha, molaoli oa ka ntle o laola li-valve tsa thermostatic (ho li bula ha mocheso o le tlase haholo le ho li koala ha mocheso o behiloeng esale pele o fihlile).
EU-M-8n room regulator e ka sebelisoa ho lokisa litlhophiso libakeng tse ling - mocheso o behiloeng esale pele kapa ho futhumatsa fatše.

HLOKOMELA Ke molaoli a le mong feela oa EU-M-8n o ka kenngoa mochining oa ho futhumatsa.

Mesebetsi e fanoang ke molaoli:

• Puisano e se nang mohala le molaoli oa EU-L-8e, li-sensor (EU-C-8r, EU-C-mini, EU-CL-mini, EU-C-8f, EU-C-8zr, EU-C-2n), balaoli ba likamore (EU-R-8b, EU-R-8bw, EU-R-8b Plus, EU-R-8-static act)
• Taolo ea mocheso oa kamore
• Ho hlahisa li-setting tse kang mocheso, letsatsi le nako
• Senotlolo sa batsoali
• Oache ea alamo
• Screensaver - monyetla oa ho kenya linepe (pontšo ea li-slide)
• Ntlafatso ea software ka USB
• Ho laola litlhophiso tsa libaka tse ling - lithempereichara tse seng li setiloe, linako, mabitso jj.
• Monyetla oa ho hlahisa liphetoho mananeong a lefats'e

Lisebelisoa tsa taolo:

• Phanele e entsoeng ka khalase
• Puisano e se nang mohala
• Sekrine se seholo sa 'mala oa ho ama
• Sensor ea mocheso e hahiloeng
• E ntlafalang

HLOKOMELA
Molaoli ha a lekanye mocheso. E fetisetsa lipalo tsa mocheso ho tloha ho balaoli ba kamore le li-sensor ho balaoli ba kantle bao ba ngolisitsoeng ho tsona.

MOKHOA OA HO KENYA MOLAOLI

Selaoli se khona ho kenngoa ka har'a lebokose la motlakase.

TLHOKOMELO Kotsi ea ho ts'oaroa ke motlakase o bolaeang ka lebaka la ho ama likhokahano tse phelang. Pele o sebetsa ho molaoli, tima phepelo ea motlakase 'me u thibele hore e se ke ea buloa ka phoso.

HLOKOMELA Khokelo e fosahetseng ea lithapo e ka senya molaoli.

Litšoantšo tse ka tlase li bonts'a khokahano e nepahetseng:

TLHALOSO SEHLOHONOLO

Sesebelisoa se laoloa ho sebelisoa likonopo tse haufi le pontšo.

1. Kenya lenane la taolo
2. Mokhoa oa hajoale oa ts'ebetso (setšoantšo sa setulo sa letsoho - mokhoa oa boiketlo)
3. Mohatsela o sebetsa
4. Mocheso oa ka ntle
5. Nako le letsatsi la hajoale
6. Boemo bo ikhethileng ba libaka:
7. Letšoao la libaka
8. Lebitso la sebaka
9. Mocheso oa hona joale oa libaka
10. Mocheso oa libaka o behiloeng esale pele

MOLAOLI LITŠOANTŠISO

1. BLOCK DIAGRAM - MOLAOLI MENU
2. LIBAKA
   Lenane lena le hlalositsoe ka botlalo karolong ea VI. 3. KUUOA KA NTLE
3. TS'IRELETSO
   Tekanyo ea sensor ea kamore e lokela ho etsoa ha e ntse e phahama kapa ka mor'a hore molaoli a sebelisoe nako e telele, haeba mocheso o ka ntle o bontšitsoeng o fapane le mocheso oa sebele. Sebaka sa litlhophiso tsa ho lekanya ke ho tloha ho -10°C ho ea ho +10°C ka ho nepahala ha 0,1°C.
   3.2. TSEBISO
   Kamora ho khetha ts'ebetso ena, ponts'o ea taolo e tla bonts'a matla a lets'oao le boemo ba betri ea sensor ea kantle.
4. MOEKETSI MOCHESO
   Mosebetsi ona o sebelisetsoa ho ngolisa mochine oa mocheso (C-8r, C-mini kapa CL-mini). Latela mehato ena ho ngolisa sensor:
   1. Khetha khetho ea ho ingolisa ho EU-M-8n (Menu > Sensor ea mocheso > Ngoliso)
   2. Tobetsa konopo ea ngoliso ho sensor.
5. NGOLISISO
   Mosebetsi ona o nolofalletsa mosebedisi ho ngolisa EU-M-8n room regulator ho EU-L-8e molaoli ea ka sehloohong. E le hore u ingolise:
   1. Kgetha Ngodiso ho EU-M-8n (Menu > Ngodiso)
   2. Kgetha Ngodiso ho menu ya EU-L-8e controller (Menu > Zone 1-8 > Ngodiso)
6. LIEKETSENG NAKO
   Ts'ebetso ena e thusa mosebelisi ho beha letsatsi le nako tsa hajoale tse tla hlahisoa skrineng se seholo.
7. LIEKETSENG TSEKO
   Ts'ebetso ena e thusa mosebelisi ho fetola liparamente tsa skrine ho latela litlhoko tsa motho ka mong.
   1. SCREEN SAVER
      • Khetho ea Screensaver - Kamora ho tobetsa aekhoneng ena, mosebelisi a ka tima skrineng (Ha ho na skrini) kapa a beha skrini ka mokhoa oa:
      • Pontšo ea li-slide – skrineng se bonts’a linepe ka lebelo le hlalosoang ke mosebelisi. Khetho ena e ka sebelisoa haeba linepe li kentsoe pele.
      • Oache - skrine e bonts'a oache
      • Ha e na letho - ka mor'a nako e boletsoeng esale pele ea ho se sebetse skrineng ha se na letho

Ho kenya linepe - Pele o kenya linepe mohopolong oa molaoli li tlameha ho sebetsoa ka ImageClip (software e ka khoasolloa ho tsoa ho http://tech-controllers.com/download/software). Kamora hore software e kenngoe le ho qala, kenya linepe. Khetha sebaka sa foto se tla hlahisoa skrineng. Senepe se ka fetoloa. Ka mor'a hore foto e 'ngoe e lokisoe, kenya e latelang. Ha linepe tsohle li se li lokile, li boloke foldareng e kholo ea flash drive. Ka mor'a moo, kenya flash drive boema-kepeng ba USB 'me u kenye tšebetsong ea ho kenya Setšoantšo ho menu ea taolo. Hoa khoneha ho kenya linepe tse fihlang ho tse 8. Ha u kenya linepe tse ncha, tsa khale li tlosoa mohopolong oa molaoli.

• Nako ea ho se sebetse - ts'ebetso ena e sebelisoa ho hlalosa nako eo skrineng e kenngoeng ka eona.
• Pontsho ya dilaete kgafetsa - kgetho ena e sebediswa ho seta kgafetsa eo dinepe di bontshiwang skrineng (haeba pontsho ya Dilaete e kentswe tshebetsong).

LEKHANYA LEKHANYA
Ts'ebetso ena e thusa mosebelisi ho fetola khanya ea skrine ho latela maemo a hajoale e le ho ntlafatsa boleng ba eona.

TS'OANELO KHOTHA
Mosebelisi a ka fetola khanya ea skrine e se nang letho.

SELEMO NAKO
Ts'ebetso ena e thusa mosebelisi ho hlalosa nako ea ho se sebetse ka mor'a moo skrineng e fellang letho.

LITLHAKISO TSA ALARM
Submenu ena e sebediswa ho kenya tshebetsong le ho lokisa diparamente tsa watjhe ya alamo . Oache ea alamo e kanna ea kengoa hang kapa ka matsatsi a khethiloeng a beke. Hape hoa khoneha ho tima mosebetsi ona.

TS'IRELETSO
Tlanya ho Litšireletso ho menu e kholo ho bula skrine e nolofalletsang mosebedisi ho hlophisa ts'ebetso ea senotlolo sa batsoali. Ha tshebetso ena e kentswe tshebetsong ka ho kgetha Auto-lock ON, mosebedisi a ka seta PIN khoutu e hlokahalang ho fihlella menu ya taolo.
HLOKOMELA
0000 ke PIN khoutu ea kamehla.

KHETHA PUO
Ts'ebetso ena e thusa mosebelisi ho khetha mofuta oa puo ho menu ea taolo.

SOFTWARE TŠEBELE
Ha khetho ena e khethiloe, skrine e bonts'a logo ea moetsi oa taolo le mofuta oa software.

LIBAKA

EU-M-8n ke molaoli oa kamore e kholo - e nolofalletsa mosebelisi ho hlophisa likarolo tsa libaka tse ling ho sa tsotelehe molaoli oa kamore kapa sensor ea kamore e sebelisoang moo.
Bakeng sa ho edita diparamente tse itseng tsa sebaka, tlanya sebakeng sa skrine ka tlhahisoleseding ya boemo ba sebaka. Pontšo e bonts'a skrine ea mantlha ea ho hlophisa libaka:

1. Khutlela skrineng se seholo
2. Letšoao la mokhoa oa tšebetso
3. Letšoao la kemiso
4. Ho futhumatsa ho sebetsa
5. Mocheso oa ka ntle
6. Nako le letsatsi la hajoale
7. Kenya menyu ea Libaka
8. Litšoantšo tsa parameter
9. Mocheso oa libaka o behiloeng esale pele
10. Lebitso la lenane la hajoale
11. Mocheso oa hona joale oa libaka

THIBELA DIAGRAM - MENU YA DITIRO

ON
Kamora hore sensor ea kamore e kenngoe tšebetsong le ho ngolisoa sebakeng se fanoeng, e sebelisoa ke molaoli oa EU-L-8e. ke litlhophiso tsa kamehla tsa khetho ena. E ka sebelisoa ha sensor ea kamore e ngolisitsoe.

TS'ELISO LIEKETSENG

TS'ELISO LEHAE
Kemiso ena ea beke le beke e abetsoe sebaka se itseng feela. Kamora hore sensor ea kamore e fumanoe ke molaoli ea ka sehloohong, kemiso e kentsoe ka bo eona sebakeng sena mme e ka fetoloa ke mosebelisi ho latela litlhoko tsa motho ka mong. Liphetoho tse hlahisitsoeng li sebetsa feela sebakeng se fanoeng.

KEmiso ea LEFATŠE 1-5
Mananeo a lefats'e a fumaneha libakeng tsohle - sebakeng se seng le se seng ke kemiso e le 'ngoe feela e ka kengoang tšebetsong. Litlhophiso tsa kemiso ea lefats'e li sebetsa ka bo eona libakeng tsohle tse setseng moo kemiso e fanoeng ea lefats'e e sebetsang.

Mokhoa oa ho hlophisa lenane:
Kamora ho kenya skrineng sa ho hlophisa kemiso, kemiso e ka fetoloa ho latela litlhoko tsa mosebelisi. Litlhophiso li ka hlophisoa bakeng sa lihlopha tse peli tse arohaneng tsa matsatsi - sehlopha sa pele se tšoailoe ka 'mala oa lamunu, se seng ka' mala o moputsoa. Hoa khoneha ho fana ka linako tse fihlang ho 3 ka litekanyetso tse fapaneng tsa mocheso ho sehlopha ka seng. Ka ntle ho linako tsena tsa nako, mocheso o akaretsang o behiloeng esale pele o tla sebetsa (boleng ba oona bo ka boela ba hlophisoa ke mosebedisi).

1. Mocheso o tloaelehileng o behiloeng esale pele bakeng sa sehlopha sa pele sa matsatsi ('mala oa lamunu - ho example ka holimo ho 'mala e sebelisoa ho tšoaea matsatsi a mosebetsi Mantaha-Labohlano). Thempereichara e sebetsa ka ntle ho linako tse hlalosoang ke mosebelisi.
2. Linako tsa nako bakeng sa sehlopha sa pele sa matsatsi - mocheso o behiloeng esale pele le meeli ea nako. Ho tobetsa nako e itseng ho bula skrine ea ho hlophisa.
3. Mocheso o tloaelehileng o behiloeng esale pele bakeng sa sehlopha sa bobeli sa matsatsi ('mala o moputsoa - ho example ka hodimo ho mmala o sebedisoa ho tshwaya Moqebelo le Sontaha).
4. Ho eketsa linako tse ncha, tlanya "+".
5. Matsatsi a beke - matsatsi a lamunu a abeloa sehlopha sa pele athe matsatsi a maputsoa a abeloa sa bobeli. Ho fetola sehlopha, tlanya ka letsatsi le khethiloeng.

Nako ea ho hlophisa skrine e nolofalletsa mosebelisi ho fetola mocheso o behiloeng esale pele le meeli ea nako ea nako ka nepo ea metsotso e 15. Haeba linako li fetana, li tšoauoa ka 'mala o mofubelu. Litlhophiso tse joalo li ke ke tsa bolokoa.

LIEKETSENG LIEKETSENG

TSEBISO
Khetha khetho ena ho view li-actuator tsohle le liparamente tsa tsona: tse ngolisitsoeng kapa che, boemo ba betri le matla a lets'oao.

LIEKETSENG
Submenu ena e thusa mosebelisi ho hlophisa ts'ebetso ea li-actuator tsa thermoelectric tsa STT-869. Mosebelisi a ka hlalosa boholo le bonyane ba ho bula actuator - boemo ba ho bula le ho koala ha valve ha ho mohla bo tla feta litekanyetso tsena.

Ts'ebetso ea SIGMA e nolofalletsa taolo e boreleli ea valve ea thermostatic. Kamora ho kenya ts'ebetso ena, mosebelisi a ka beha bonyane le boemo bo phahameng ba ho koala valve.
Ho feta moo, mosebelisi o etsa litlhophiso parameter, e hlalosang mocheso oa kamore eo valve e qalang ho koala le ho bula.

ExampLe: Thempereichara ea libaka tse behiloeng esale pele: 23°C Ho buloa bonyane: 30% Ho buloa ho hoholo: 90% Range: 5°C Hysteresis: 2°C

Ka litlhophiso tse ka holimo, vale e qala ho koala ha mocheso oa libaka o fihla ho 18 ° C (mocheso o behiloeng esale pele o tlosa boleng ba Range). Ho bula bonyane ho finyelloa ha mocheso oa libaka o behiloeng esale pele o fihleloa. Ka mor'a moo, mocheso o qala ho theoha. Ha e theohela ho 21 ° C (mocheso o behiloeng esale pele ho tlosa hysteresis), valve e qala ho buleha. E fihlella boholo ba ho bula ha mocheso o fihla ho 18°C.

Tshireletso profile - hang ha mosebetsi ona o se o entsoe, molaoli oa kantle o hlahloba mocheso. Haeba boleng bo behiloeng esale pele bo fetisoa ke palo ea likhato tse hlalositsoeng ho parameter, li-actuator tsohle tse sebakeng li tla koaloa. Ts'ebetso ena e sebetsa ha feela SIGMA e sebetsa.

LIEKETSENG MOHAPI

tieho NAKO
Ts'ebetso ena e nolofalletsa mosebelisi ho beha nako ea ho lieha ka mor'a moo molaoli ea ka sehloohong a romellang letšoao ho koala li-activators. Litlhophiso li fapana :00:00 - 00:30 metsotso.
ExampLe: Nako ea ho lieha e behiloe metsotso e 10. Ha fensetere e buloa, sensor ea C-2n e romela boitsebiso ho molaoli ea ka sehloohong. Haeba sensor e romela tlhahisoleseding e 'ngoe ea hore fensetere e bulehile ka mor'a metsotso ea 10, molaoli ea ka sehloohong o tla qobella li-actuator ho koala.

TSEBISO
Khetha khetho ena ho view li-sensor tsohle le li-parameter tsa tsona: tse ngolisitsoeng kapa che, boemo ba betri le matla a lets'oao. 6. HO CHESA MABAKA

MOSEBETSI OA MOTSOALLE

• Tshireletso profile - ts'ebetso ena e sebelisetsoa ho boloka mocheso oa fatše ka tlase ho tekanyo e phahameng ea mocheso e le ho sireletsa tsamaiso ea mocheso khahlanong le mocheso o feteletseng. Ha mocheso o fihla ho boleng bo phahameng, mocheso oa libaka o holofetse.
• Matšeliso profile - mosebetsi ona o kenyelletsa ho shebella mocheso oa fatše ho boloka mocheso oa matšeliso. Ha mocheso o fihla ho boleng bo phahameng, ho futhumatsa libaka ho tla holofala (e le ho sireletsa tsamaiso khahlanong le ho chesa haholo). Ha mocheso o theoha ka tlase ho boleng ba bonyane, ho futhumatsa libaka ho tla lumelloa.

MOEKETSI MOCHESO
Ts'ebetso ena e sebelisetsoa ho beha mocheso o tlase oo ho futhumatsa fatše sebakeng se fanoeng.

MOEKETSENG MOCHESO
Ts'ebetso ena e sebelisetsoa ho beha mocheso ka holim'a moo ho futhumatsa fatše sebakeng se itseng ho holofalitsoeng.

LIEKETSENG MOCHECHE
Ts'ebetso ena e sebelisetsoa ho hlalosa mocheso o behiloeng esale pele bakeng sa mekhoa e itseng ea ts'ebetso. Mosebelisi a ka hlophisa mocheso oa boiketlo, mocheso oa moruo le mocheso oa matsatsi a phomolo

TSIETSO TSOHLE
Ts'ebetso ena e sebelisetsoa ho hlalosa mamello ea mocheso o behiloeng esale pele e le ho thibela oscillation e sa batleheng haeba ho ka ba le phetoho e nyane ea mocheso. Sebaka sa litlhophiso: 0,1°C - 10°C ka ho nepahala ha 0,1°C.
Example: ha mocheso o behiloeng esale pele ke 23⁰C le hysteresis e behiloe ho 0,5⁰C, mocheso oa libaka o nkoa o le tlaase haholo ha mocheso oa kamore o theohela ho 22,5⁰C. 9.

TS'IRELETSO
Tekanyo ea sensor ea kamore e lokela ho etsoa ha e ntse e phahama kapa ka mor'a hore molaoli a sebelisoe nako e telele, haeba mocheso o ka ntle o bontšitsoeng o fapane le mocheso oa sebele. Sebaka sa litlhophiso tsa ho lekanya ke ho tloha ho -10°C ho ea ho +10°C ka ho nepahala ha 0,1°C.

LEBITSO LEBITSO
Tshebetso ena e thusa mosebedisi ho abela lebitso sebakeng se itseng.

LETŠOANTŠI LE KHABANE
Tshebetso ena e thusa mosebedisi ho khetha letšoao le tla bontšoa haufi le lebitso la libaka.

TS'IRELETSO LE TSOSO
Litšireletso le lialamo li hlalositsoe ka botlalo bukeng ea litaelo ea molaoli oa EU-L-8e.

LIEKETSENG SOFETA
TEMOSO Ntlafatso ea software e tla etsoa feela ke motho ea tšoanelehang. Ka mor'a hore software e nchafatsoe, ho ke ke ha khoneha ho tsosolosa litlhophiso tse fetileng.

E le ho kenya software e ncha, molaoli o tlameha ho tlosoa ho tloha phepelong ea matla. E latelang, kenya flash drive ka software e ncha boema-kepeng ba USB. Hokela molaoli ho phepelo ea motlakase. Molumo o le mong o bontša hore ts'ebetso ea ntlafatso ea software e se e qalile.

LIEKETSENG MOTS'OANE

• Phepelo ea motlakase 230V ± 10% / 50Hz
• Max. tshebediso ya matla 1,5W
• Mocheso oa ts'ebetso 5°C÷50°C
• Mongobo o amohelehang oa tikoloho <80% REL.H
• Khafetsa ea ts'ebetso 868MHz

Phatlalatso ea EU ea ho lumellana
Ka hona, re phatlalatsa tlas'a boikarabello ba rona feela hore molaoli oa EU-M-8n o entsoeng ke TECH, ntlo-kholo ea Wieprz Biała Droga 31, 34-122 Wieprz, o lumellana le Directive 2014/53/EU ea paramente ea Europe le Lekhotla la 16 Mmesa 2014 ho etsa hore melao ea 'maraka e fumanehe. Directive 2009/125/EC ho theha moralo oa ho beha litlhoko tsa ecodesign bakeng sa lihlahisoa tse amanang le matla hammoho le taolo ea MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY ea la 24 Phuptjane 2019 e fetolang melaoana e mabapi le litlhoko tsa bohlokoa mabapi le lithibelo tsa lisebelisoa tsa elektroniki le lisebelisoa tse itseng tsa elektroniki. / 2017 ea Paramente ea Europe le ea Lekhotla la 2102 November 15 e fetolang Directive 2017/2011/EU mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ka thepa ea motlakase le ea elektronike (OJ L 65, 305, leq. 21.11.2017).

Bakeng sa tlhahlobo ea tumellano, ho ile ha sebelisoa litekanyetso tse lumellanang:
PN-EN IEC 60730-2-9 :2019-06 ser. 3.1a Tšireletseho ea tšebeliso
ETSI EN 301 489-1 V2.1.1 (2017-02) par.3.1b Tšebelisano ea motlakase
ETSI EN 301 489-3 V2.1.1 (2017-03) par.3.1 b Compatibility ea Electromagnetic
ETSI EN 300 220-2 V3.1.1 (2017-02) par.3.2 Tšebeliso e sebetsang hantle le e momahaneng ea seea-le-moea
ETSI EN 300 220-1 V3.1.1 (2017-02) par.3.2 Tšebeliso e sebetsang hantle le e momahaneng ea seea-le-moea

Ntlo-kholo e bohareng:
ul. Biata Droga 31, 34-122 Wieprz

Tšebeletso:
ul. Skotnica 120, 32-652 Bulowice
mohala: +48 33 875 93 80
lengolo-tsoibila: serwis@techsterrowniki.pl

Litokomane / Lisebelisoa

BA LAOLI BA TECH EU-M-8N Phanele ea Taolo e se nang Waele [pdf] Bukana ea Mosebelisi EU-M-8N Wireless Control Panel, EU-M-8N, Wireless Control Panel, Control Panel

Litšupiso

• Bukana ea Mosebelisi