TARAMPS PRO2.4BT DSP Digital Audio processor Tataiso ea Tataiso

Lebitso la Sehlahiswa: Taramps PRO 2.4BT Digital Audio Processor
DSP Resolution: 24-bit / 48KHz
Khokahano: bluetooth
Taolo: App-controlled via TARAMPS PRO app
Likaroloana: Crossover filters, time alignment, gain control,phase inversion, limiter, signal routing, graphic and parametric equalizers

Litaelo tsa Tšebeliso ea Sehlahisoa

Litlhoko tsa Polokeho:
Installation must be done by a qualified professional. Please read the manual before use to understand precautions and safety recommendations.

Kemiso e Felletseview:
Ensure proper connections including negative power supply,remote input/output, and positive power connection. Pay attention to safety symbols throughout the manual.

DSP Ho fetaview:
The PRO 2.4BT features advanced components like audio signal inputs A and B, Bluetooth connectivity, input/output clip indicators, power connector, selection/mute buttons, and input gain controls.

Rea qala:

To begin using your PRO 2.4BT:

Install the DSP following the provided wiring diagram.
Khoasolla TARAMPS PRO app from Google Play Store (Android) or App Store (iOS) with minimum requirements of Android 8.1 / iOS 16.

Selelekela

Kea leboha ha u khethile Taramps sehlahisoa. PRO 2.4BT ke mochine oa molumo oa digital o nang le khokahanyo ea Bluetooth, e lumellang taolo e feletseng ea litlhophiso ka smartphone kapa tablet ka app e inehetseng. Sesebelisoa se fana ka sebopeho se hlakileng, se nolofalletsang basebelisi ho etsa liphetoho tsa nako ea nnete kapele le ha bonolo.

Featuring a high-performance 24-bit / 48KHz DSP, the PRO 2.4BT offers a wide range of precise settings and configurations. It includes crossover filters, time alignment, gain control, phase inversion, limiter, signal routing, as well as both graphic and parametric equalizers designed to optimize the performance of your audio system.

Ka kopo bala bukana ena ka hloko pele u etsa likhokahano kapa u sebelisa sehlahisoa. Haeba u na le lipotso, ikopanye le tšehetso ea rona ea tekheniki ho www.taramps.com.br.

Ka lebokoseng

1 PRO 2.4BT processor
1 Powe supply connector
1 Mohala oa terata
1 lenakana la Bluetooth

Litlhoko tsa polokeho

Ho netefatsa ts'ebeliso e nepahetseng, ka kopo bala bukana ena pele u sebelisa processor ea hau. Ho bohlokoa hore u tloaelane le MELAO e thathamisitsoeng mona.

Ho kenngoa ha thepa ena ho tlameha ho etsoa ke setsebi se tšoanelehang.
Sebelisa lisebelisoa tse nepahetseng ho kenya thepa ena.
Sesebelisoa sena se tlameha ho sebelisoa le libeteri tsa 12V. Kamehla hlahloba voltage pele ho kenya.

Thepa e tlameha ho kenngoa sebakeng se tiileng le hole le mehloli ea mocheso.
Le ka mohla u se ke ua e kenya libakeng tse pepesehileng lerōle, mongobo kapa metsi. Etsa bonnete ba hore o e kenya hole le tanka ea mafura, lithapo tsa mafura, mehloli ea mocheso kapa likarolo tse ling tsa koloi.

Be sure to install a protective fuse or circuit breaker near the battery. Follow the current recommended in this manual. Improper use of the fuse or circuit breaker can cause overheating, smoke, product damage, injury or burns.
Qoba ho tsamaisa likhoele ka holimo kapa ka mathōkong a nchocho. Sebelisa li-grommets tsa rabara kapa tsa polasetiki ho sireletsa likhoele tse fetang 'meleng oa koloi.

Mochine oa molumo oa likoloi o ka hlahisa maemo a phahameng a khatello ea molumo. Qoba ho pepesehela maemo a kaholimo ho 85dB ho thibela tahlehelo ea kutlo e sa feleng.

Litlhahiso tsa bohlokoa
A wiring gauge of 1.5 mm² is recommended for the positive/negative cables and 0.50 mm² for the remote cable.
For protection, a 1A fuse should be installed near the positive pole of the battery. See more details on page 16 of this manual.

Phepelo e mpe ea matla: Hokela ho palo e mpe ea betri.
Kenyelletso ya remoutu: Hokela ho tlhahiso e hole ya seamohedi sa media kapa multimedia.

Remote output: Ho kenya tshebetsong amplifilimi.
Power Positive: Hokela ho palo e ntle ea betri (12V).

Tshireletso
Ho pholletsa le bukana ena, ela hloko matšoao a polokeho.

Letšoao lena CAUTION, e lemosang basebelisi ka litaelo tsa bohlokoa. Ho iphapanyetsa litemoso tsena ho ka baka kotsi kapa tšenyo ea sehlahisoa.

DSP e felileview

The PRO 2.4BT oﬀers several advanced features designed to optimize your audio system’s performance. Below is an overview ea likarolo le mesebetsi ea bohlokoa ka ho fetisisa:

Taolo ea ho Kena: MAX: Accepts signals up to 2V RMS (standard sensitivity);
MIN: Accepts signals up to 9V RMS without distortion (low sensitivity).

Maikutlo a Lipontšo:

Kenyelletso ea RCA: Accepts low-level, high-impedance signal (ideal for RCA outputs of head units). High-level input: Accepts high-level, low-impedance signals.
This input also enables Auto Turn-On: The DSP automatically powers on when a signal is detected. In this case, connecting the REMOTE IN wire is not necessary.
Hlokomela: Auto turn-on is compatible with most head units, but some models may not trigger it due to internal circuitry. If auto turn-on doesn’t work, connect the REMOTE IN wire manually.

Input Clip Indicator LED: This LED signals that the input signal has reached the maximum level accepted by the processor, which can result in signal distortion. If it lights up, reduce the output level of the signal source and readjust the system’s gain structure accordingly. Limiter / Output Clip Indicator LEDs: These LEDs serve a dual purpose:
When the limiter is disabled, they indicate that the output signal has reached the maximum allowable level (clipping).
Ha limiter e nolofalitsoe, li bontša hore moeli o sebetsa ka mafolofolo-ho bolelang hore letšoao la tlhahiso le fihlile kapa le fetisitse moeli o behiloeng ho li-parameter tsa limiter.
BT Connect LED: Indicates active Bluetooth pairing.
Mohokahanyi oa Matla: Refer to page 16 for wiring instructions.
Lenakana la Bluetooth: For optimal performance, mount the antenna in an open area away from metal parts or electrical wires to prevent signal loss.

Rea qala

Ho qala ho sebelisa PRO 2.4BT ea hau, latela mehato ena:

Kenya DSP ho latela setšoantšo sa lithapo se fanoeng leqepheng la 16.

Khoasolla TARAMPSesebelisoa sa S PRO se tsoang Lebenkeleng la Google Play (Android) kapa Lebenkele la App (iOS). Litlhoko tse tlase: Android 8.1 / iOS 16.
Power on the DSP. The “BT Connect” LED will begin flashing.

Bula TARAMPS PRO app.
Select Connect to pair with the DSP via Bluetooth.

Or select “Demo Mode” to explore the app without a connection.

Fana ka tumello ea Bluetooth ha u susumetsoa ke sesebelisoa.

Select the DSP from the list of available units.
For easier identification:
Move your phone closer to the desired processor; “Closest” will appear. Turn oﬀ other nearby units.
Rename each unit in the app for clarity when using multiple units.

Once connected, the BT Connect LED continuously lit.
Enter the default password: 1234; Change it in the the Password / Lock menu for security.

Mesebetsi e ka sehloohong ea skrine ea APP

Motsamaisi oa Khokahano: Hokela / hakolla DSP (ho fihla ho li-unit tse 4 ka nako e le 'ngoe).
Lebitso la DSP: Tlanya ho reha aekhone ho reha DSP hape.
Likhokelo tse sebetsang: E bonts'a hore na ke li-unit tse kae tse parang hajoale.
Input Clip Monitor: E bonts'a hore na lets'oao la ho kenya le ntse le fokotseha.
Limiter / Output Clip LEDs: Bontša ts'ebetso e fokolang le ho fokotsa lihlahisoa.
Taolo ea Bolumo e Ntle: E fetola boemo ba kakaretso ea tlhahiso ea sistimi.
Output Gain and Mute: Tap to adjust gain; and long press to mute.
Screen Lock: Swaepa ka ho le letona ho thibela liphetoho tse sa lebelloang.
Main Menu Access: Swipe left to open advanced audio settings.
Hlokomela: the app is fully responsive and supports both portrait and landscape modes. Horizontal orientation is recommended for features like the Graphic EQ and Crossover for clearer visualization.

Molumo oa menu e kholo

Ho menu ea molumo u tla fumana litsamaiso le litlhophiso tse amanang le ts'ebetso ea molumo, joalo ka.

Input/output routing: Define how inputs A, B, or A+B are routed to outputs 1 to 4. Use the selector keys to assign signals to each output.

Input graphic equalizer: 15-Band graphic EQ. It can be adjusted from -12 to +12dB, in precise steps of 0.1dB. Adjust it by selecting the band and dragging the knob or by directly typing its parameter using + and – buttons.
EQ PRESETS: You can also select an equalization preset from the list.

Input parametric EQ: Allows precise adjustments of Frequency, Gain and Q Factor. Drag the point on the graph to adjust the Gain, the other parameters are defined by typing the value or adjusting using the buttons on the side of the parameter (+ and -).

phetoho: This section allows you to define the filters applied to each processor output channel, setting HPF (High Pass Filter) and LPF (Low Pass Filter) frequency cuts up to -48dB/Octave, using either Linkwitz-Riley (LR) or Butterworth (BT) types.

Seteishene sa Output: Khetha likanale (channel 1; channel 2; channel 3; channel 4) ka holimo ho app;
Fetola lintlha tsa filthara ka ho toba ka ho hula li-circles ho graph (le letšehali = HPF, le letona = LPF);
You can also set and fine-tune the HPF and LPF frequencies using the + and – buttons;
Select the filter type – the response curve will be updated automatically to reflect the chosen filter attenuation;
O ka sheba li-curve ho tsoa liteisheneng tsohle ka ho tšoaea li-checkbox tse ka tlase;

Boemo ba LED bo lekanyelitsoeng ba mocha o mong le o mong bo bonts'oa ka tlase ho kerafo;
Sebelisa likonopo tsa MUTE ho tima dikanale tsa tlhahiso.

OFF: Crossover off

LR12Linkwitz – Rilley c/ -12dB/octave
LR18 Linkwitz – Rilley c/ -18dB/octave
LR24Linkwitz – Rilley c/ -24dB/octave
LR30Linkwitz – Rilley c/ -30dB/octave
LR36Linkwitz – Rilley c/ -36dB/octave
LR42 Linkwitz – Rilley c/ -42dB/octave
LR48Linkwitz – Rilley c/ -48dB/octave

OFF: Crossover off

ВТ6 Butterworth c/ -6dB/octave
BT12 Butterworth c/ -12dB/octave
BT18 Butterworth c/ -18dB/octave
BT24 Butterworth c/ -24dB/octave
BT30 Butterworth c/ -30dB/octave
BT36 Butterworth c/ -36dB/octave
BT42 Butterworth c/ -42dB/octave
BT48 Butterworth c/ -48dB/octave

Delay alignment: Synchronize audio signals from diﬀerent speakers or audio sources so that they reach the listener at the same time.

Hobane li-coil tsa lentsoe tsa li-transducer tse fapaneng - joalo ka li-woofers, li-driver tsa midrange le li-tweeter - ha li eme ka sefofaneng se le seng, ho lieha ha nako ho ka etsahala lipakeng tsa maqhubu. Ho se tsamaisane hona ho ka ama hampe tlhahiso e nepahetseng ea molumo. Tshebetso ya Alignment e diehisa matshwao a rometsweng ho di-transducer tse ding e le hore a tsamaellane le nako ya ho fihla ya e nang le boemo bo tebileng ba dikhola, e thusa ho kgutlisa tlhahiso e nepahetseng ya modumo.
Use the furthest driver coil as reference
Enter delay values (in centimeters) for each output based on measured difference

Ho beha litšupiso coil bakeng sa ho tsamaisana

Identify the reference voice coil (*) this is the one positioned furthest back from the front baffle of the speaker enclosure. (In the example, the reference point is the center of the horn driver’s coil.)
Measure the distance from this reference coil to each of the other drivers. This distance is referred to as A . Enter the closest matching value (in centimeters) for each output channel.
Pheta ts'ebetso ena bakeng sa likanale tsohle tse hlahisoang. Sebelisa likonopo tse lumellanang ho li khetha.

Taolo ea mekhahlelo: Invert output signal phase by selecting 180° option.

Limiter: E sebetsa e le moeli bakeng sa boemo bo phahameng ba pontšo ea tlhahiso ea processor, e le hore e se ke ea feta moeli oa matla o tšehetsoeng bakeng sa transducer ka 'ngoe ea sistimi.

Litekanyetso tsa Limiter:
Auto: Sets the Attack and Release parameters automatically, according to the channel frequency cutoﬀ (HPF). Otherwise, you can set the Attack and Release manually.
Moeko - Point when the limiter begins to act (indicated by the RED LED on each output channel in the DSP and by the RED indicator at Limiter/Out Clip into App screen). Drag the point across the graphic to set the threshold, or use the field and +/-. To turn oﬀ the limiter, press the button ho fihlela OFF e hlaha.
Attack, or Attack time – Time needed to limiter reduce the gain after the signal reaches the threshold. Set the value using the field and +/-.
Release, or Release time – Time needed to limiter return to the original gain after the signal drops below the threshold. Set the value using the field and +/-.
Select the output channel on the above tabs (channel 1, channel 2, channel 3, channel 4) ; and mute each one with the corresponding button .

Boemo ba sephetho: You can adjust the Master (General) volume, as well as the volumes of the respective outputs, by dragging the point or more precisely using + and -. Volume or gain adjustments take eﬀect only after you stop touching the screen. Each output channel features a limiter/clip LED.

Output parametric EQ: Allows precise adjustments of Frequency, Gain and Q Factor. Drag the point on the graph to adjust the Gain, the other parameters are set by typing in the value or adjusting it using the buttons + and -. Select the output by the tabs (Channel 1, Channel 2, Channel 3, Channel 4), or on the DSP’s 1~4 keys.

Audio Manager: Used for the adjustment and testing of audio systems, the audio manager oﬀers the following operating modes:

ON / TSOANG: Turns on or oﬀ the signal generator.
Fixed Frequency mode: O ka fetola amplitude o sebelisa boitšisinyo ba pinch ( bula kapa u koale menoana e 'meli e otlolohile - feela ha molaoli oa molumo a le teng), ka ho kenya boleng tšimong ea Gain (dB) kapa ka konopo ea rotary.
In Sweep mode: set the starting and ending frequencies by dragging the dashed lines vertically. You can also increase or decrease the signal amppuo ka ho sebedisa tshisinyo ya menwana e mmedi kerafong.

Bakeng sa litokiso tse nepahetseng haholoanyane, sebelisa likonopo tsa +/-. Ho qala ho fiela, khetha lebelo (e liehang, bohareng, kapele).

Save / load configurations: Store and manage your settings via the app: It allows you to save settings for later recovery or backup, as well as export/import settings presets. There is also a sharing option, so the ?le can be transmitted to another person via instant messaging applications.

Settings can be saved in two ways: On the DSP itself (up to 3 memories) and on the Smartphone / Tablet (Up to 15 memories).
Swaepa lebitso la memori ka ho rapama (ka ho le letshehadi kapa ka ho le letona) ho hlahisa dikgetho tse latelang: Laola, Romella, Renaha hape, le Phumula.
For the device’s internal memory, only the Load option is available.
To save a new configuration, tap +New.

Sebelisa litlhophiso tse bolokiloeng ho tsoa ho smartphone kapa tablet ea hau ka ho khetha SMARTPHONE le ho tobetsa konopo.

Reset/Restore: This screen also allows you to erase the DSP settings.
Reset Audio Settings: Restores only the audio adjustments to their factory defaults while preserving all other settings (such as memory slots and password).
Khutlisa Liphoso tsa Feme: Completely resets the DSP to its original factory state, erasing all settings,saved memories, and passwords. ⚠ caution this action is irreversible.

Save to Device: Up to 3 internal memory slots.
Save to Smartphone/Tablet: Ho fihlela ho li-presets tse 15.
Likhetho: Upload, Export, Rename, Delete.
Share settings via apps.

Factory Reset from DSP: You can also perform a factory reset without the app (on the DSP itself): With the device powered oﬀ, press and hold keys 1 and 2 simultaneously.
Hold them until keys 3 and 4 start flashing alternately.
Press key 4/FCN to confirm the reset, or key 3 to cancel.

Mokhoa ona o tla khutlisetsa sesebelisoa boemong ba sona ba fektheri 'me se ke ke sa etsolloa.

Password/lock settings: Lekunutu la kamehla: 1234.

E fetole ho menu ea Password / Lock.
App access is also protected by the phone’s native security (PIN, Face ID, etc.).

Forgot the password? Perform a factory reset and reload saved settings. (The saved settings must be stored on smartphone previously).

About section: Firmware and App versions Open User Manual

Khoasolla Manual
Visit company websebaka
Leano la Lekunutu
Support via WhatApp

Khokahano ea lintho tse kenang le tse hlahisoang ke DSP

Tlhokomediso
Always observe correct polarity. Use a 1A fuse on the positive power supply line for protection.

Likarolo tsa tekheniki

E sebetsa:

Resolution……………………………………………………………………………………………………24bits
Sampling rate……………………………………………………………………………………………..48KHz

Lintho tse kenang le tse hlahisoang:

Number of input channels…………………………………………………………………………………2
Number of output channels………………………………………………………………………………4
Input/output routing:…………………………………………………………………………..A, B, A+B
General gain adjustment:……………………………………………………………………-80 a 0dB
Output gain adjustment:………………………………………………………………..-45 a +15dB
Input impedance (RCA):……………………………………………………………………..10K ohms
Input impedance (high level):……………………………………………………………..50 ohms
Output impedance:……………………………………………………………………………….47 ohms
Maximum input level (RCA, Gain Min):………………………………….25Vpp (9V RMS)
Maximum input level (RCA, Gain Max):………………………………..5,6Vpp (2V RMS)
Maximum input level (High level):……………………………………….28Vpp (10V RMS)
Maximum output level:………………………………………………………..5,9Vpp (2,1V RMS)
Frequency response (-1dB)………………………………………………………….10Hz a 22KHz
Total Harmonic Distortion…………………………………………………………………………0,01%
Signal / Noise Ratio:…………………………………………………………………………………..>90dB
Crosstalk (separation between channels)……………………………………………..>80dB

Kenya litšoantšo tse lekanyang, lihlopha tse 15, 2/3 octave le li-presets tse 12:

Frequencies:……………………………………….25,40,63,100,160,250,400,630,1K,1.6K,2.5K,4K,6.3K,10K,16KHz
Attenuation / Gain:…………………………………………………………………….-12dB to+12dB

Input Parametric EQ:

Central frequency:………………………………………………variable from 10Hz to 22KHz
Attenuation / Gain:……………………………………………………………………..-12dB a +12dB
Q factor adjustment :………………………………………………………………………………0,4 a 10

Crossover (HPF e LPF):

Cutoff frequency:………………………………………………..variable from 10Hz to 22KHz
Linkwitz Rilley Filters……………………………..-12,-18,-24,-30,-36,-42,-48dB/octave
Butterworth Filters………………………………..-12,-18,-24,-30,-36,-42,-48dB/octave
Alignment (Delay):…………………………………………………………………..8,0mS (272cm)
Phase:……………………………………………………………………………………………………….0 / 180°

Adjustable Limiter:

Threshold:…………………………………………………………………………………………….-24 to 0dB
Attack:………………………………………………………………………………………..0.1mS to 100mS
Release:………………………………………………………………………………………..1mS to1600mS

Output parametric EQ:

Central Frequency:……………………………………………..variable from 10Hz to 22KHz
Attenuation / Gain:……………………………………………………………………-12dB to +12dB
Q Factor Adjustment:…………………………………………………………………………….0.4 to 10
MUTE Function……………………………………………………….Individual at each output

Jenereithara ea molumo (Sine waveform)

Frequency range:……………………………………………….Variable from 10Hz to 22KHz
Gain:…………………………………………………………………………………………….-60 to 0dB
Modes:…………………………………………………………Fixed Frequency / 3 speed sweep
Setting memory positions:………..Factory default + 3 assignable positions
Access protection:…………………………………….4 password digits (customizable)
Connectivity:…………………………………………………………………..5.4 BLE (Low-Energy)
Simultaneous connections:………………………………………………..Up to 4 products
Typical range, with sight, without obstacles:………………………………………25m
APP compatibility:……………………………………….Android 8.1 / IOS 16 and above
Phepelo Voltage:……………………………………………………………………………..10 to 16VDC
Nominal consumption (12.6V):……………………………………………………………..0.20A
Dimensions (WxHxD):……………………198 x 35 x 130mm (7.80″ x 1.38″ x 5.12)
Weight:………………………………………………………………………………………..0.43Kg (0.95lb)

Lebitso la Bluetooth le logo ke tsa Bluetooth SIG Inc.

Lebitso la Android le logo ke tsa Google LLC.

Lebitso la iOS le logo ke tsa Apple Inc.
Lethathamo le tloaelehileng la pono, le sa sitisoeng, sebakeng se bulehileng. Lethathamo la sebele la sehlahisoa le itšetlehile ka tikoloho ea ho kenya 'me le ka angoa ke litšitiso tse kang bokaholimo ba tšepe, mabota le lisebelisoa tse ling tsa elektroniki tse sebetsang sebakeng se le seng.
APP ea sehlahisoa e kanna ea ntlafatsoa nako le nako. Taramps e na le tokelo ea ho ntlafatsa, ho eketsa, ho tlosa kapa ho ntlafatsa ts'ebetso ntle le tsebiso esale pele.

Setatemente sa waranti

TARAMPS, located at 30, Julio Budisk Hwy, Alfredo Marcondes – SP, Brazil, ZIP 19180-120, warrants this product against design, manufacturing, and assembly defects, as well as any inherent design flaws that render it unsuitable for its intended use, for a period of 12 months from the date of purchase.
In the event of a defect covered by this warranty, TARAMPS e ikarabella feela bakeng sa tokiso kapa phetoho ea yuniti eo e e entseng.

Tiisetso ena ha e kenyelle:

Products damaged due to incorrect installation, water intrusion, or unauthorized handling;
E robehile kapa tampered tiisetso tiiso;
Sebelisa tlas'a maemo a sa tloaelehang;
Litšitiso tse bakoang ke lisebelisoa, liphetoho, kapa lisebelisoa tse kentsoeng sehlahisoa;

Tšenyo ea 'mele e bakoang ke marotholi, tšusumetso, kapa liketso tsa tlhaho (mohlala, likhohola, lehalima);
Karete ea tiisetso e sa fellang kapa e fetotsoeng;
Litšenyehelo tse amanang le ho tlosa, ho kenya hape, kapa ho tsamaisa thepa;
Tšenyo leha e le efe kapa tahlehelo e bakoang ke ho se sebetse hantle kapa ho theoha ha sehlahiswa.

Litsi tsa litšebeletso tse lumelletsoeng

Bakeng sa tšehetso ea machaba, etela:
https://www.taramps.com.br/en/rede-de-assistencias-tecnicas/ U ka ikopanya le ts'ehetso ea feme ka kotloloho:

Lengolo-tsoibila: tšebeletso@taramps.com.br
Fono: +55 18 3266-4050 / +55 18 99749-3391

Boitsebiso ba ho lumellana

Phatlalatso ea ho lumellana

TARAMPS ELECTRONICS LTDA Alfredo Marcondes - SP Brazil
Mona, Taramps Electronics Ltda e phatlalatsa hore sehlahisoa sa PRO 2.4BT se lumellana le Directive 2014/30/EU, ho latela maemo a lumellanang a latelang:

EN 50498:2010
Khokahano ea Electromagnetic (EMC) - Tekanyetso ea lelapa ea sehlahisoa bakeng sa lisebelisoa tsa elektroniki tsa morao-rao likoloing

Sengoloa se felletseng sa EU Declaration of Conformity se fumaneha Leqepheng la Sehlahisoa Marang-rang.

03497-25-09573

‘‘This equipment is not entitled to protection against harmful interference and must not cause interference in duly authorized systems.’’

At the end of its useful life, this product should not be disposed of in household waste. Look for an electronic equipment collection or recycling center for correct disposal.

Tlhokomeliso ea FCC
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Hlokomela: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC.
Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo.
Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa ho feta tsa mehato e latelang:

Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
Eketsa karohano pakeng tsa thepa le moamoheli.
Hokela lisebelisoa ho seketjana se fapaneng le seo moamoheli a hoketsoeng ho sona.
Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Hlokomela: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible forcompliance. such modifications could void the user’s authority to operate the equipment.
Sesebediswa se hlahlobilwe ho kopana le ditlhoko tse akaretsang tsa kgahlamelo ya RF.
Ho boloka boikamahanyo le ditataiso tsa kgahlamelo ya RF ya FCC, sebaka se tlameha ho ba bonyane 20 cm pakeng tsa radiator le mmele wa hao, mme se tshehetswe ka botlalo ke tshebetso le ho kenngwa.

Tlhokomeliso ea IC
Sesebelisoa sena se na le li-transmitter/baamoheli ba sa lumelloeng ke laesense ba tsamaellanang le RSS(li)laesense tse sa tsoeng ka Li-RSS. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

Sesebelisoa sena se kanna sa se ke sa baka tšitiso.
Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.

Sesebelisoa se se se lekantsoe ho fihlela tlhoko e akaretsang ea tlhahiso ea RF. Ho boloka ho latela melao ea RSS-102 — Radio Frequency (RF) Exposure guidelines, thepa ena e lokela ho kengoa le ho sebetsoa ka sebaka sa bonyane ba 20cm lipakeng tsa radiator le 'mele oa hau.

E entsoe ke:
TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Júlio Budisk, SN, KM 30 Alfredo Marcondes – SP
E entsoe Brazil

www.taramps.com.br

Lipotso Tse Botsoang Hangata

Can I adjust settings in real-time using the TARAMPS PRO app?

Yes, the app allows for real-time adjustments to optimize your audio system's performance.

What is the input gain control range for the PRO 2.4BT?

The input gain control accepts signals ranging from 2V RMS (standard sensitivity) to 9V RMS without distortion (low sensitivity).

Litokomane / Lisebelisoa

TARAMPS PRO2.4BT DSP Digital Audio Processor [pdf] Buka ea Taelo
PRO2.4BT, PRO2.4BT DSP Digital Audio Processor, DSP Digital Audio Processor, Digital Audio Processor, Audio Processor

Litšupiso

Bukana ea Mosebelisi

TARAMPS PRO2.4BT DSP Digital Audio Processor

Tlhahisoleseding ya Sehlahiswa