SYSTEM SENSOR P2RL-SP Siren e nang le Leseli la Strobe

Tlhahisoleseding ya Sehlahiswa

• Lebitso la Sehlahisoa: Lisebelisoa tsa Tsebiso ea Sensor System
• Linomoro tsa Mohlala: P2RL, P2WL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP, P2GRL, P2GWL, CHSRL, CHSWL, SRL, SWL, SRL-P, SWL-P, SRL-SP, SWL-CLR - ALERT, SGRL, SGWL
• Mocheso oa ho sebetsa: 10 ho isa ho 93% Ha e kolekese
• Strobe Flash Rate: 1 flash ka motsotsoana
• Lebitso Voltage: E laoloa 12VDC kapa e laoloa 24DC/FWR
• Tshebetso Voltage Range: 8 ho 17.5V (12V nominal) kapa 16 ho 33V (24V nominal)
• Tshebetso Voltage nang le MDL3 Sync Module: 8.5 to 17.5V (12V nominal) kapa 16.5 ho 33V (24V nominal)
• Input Terminal Wire Gauge: 12 to 18 AWG Dimensions (Standard Strobe, Chime Strobe and Horn Strobe): Length – 5.6″ (143mm), Bophara – 4.7″ (119mm), Botebo – 1.25″ (32mm Dimensions) Strobe): Length – 5.26″ (133 mm), Bophara – 3.46″ (88 mm), Botebo – 1.93″ (49 mm) Dimensions (Sesebediswa se Tloaelehileng se nang le SBBRL/WL Surface Mount Back Box): Bolelele – 5.9″ (149 mm) ), Bophara – 4.9″ (125 mm), Botebo – 1.85″ (47 mm)
  Litekanyo (Sesebelisoa se kopaneng se nang le SBBGRL/WL Surface Mount Back Box): Bolelele - 5.5″ (140 mm), Bophara - 3.7" (94 limilimithara), Botebo - 1.6" (39 mm)

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Pele o kenya, bala Tataiso ea Referense ea Ts'ebeliso ea Sensor ea Ts'ebetso e Bonehang bakeng sa tlhaiso-leseling e batsi ka lisebelisoa tsa tsebiso, mehala le lits'ebetso tse ikhethileng.
2. Ela hloko litataiso tsa NFPA 72 le NEMA ha u ntse u kenya.
3. Netefatsa hore sesebelisoa sa tsebiso se lekoa le ho hlokomeloa ho latela litlhoko tsa NFPA 72.
4. Lisebelisoa tsa tsebiso tsa System Sensor li etselitsoe ho sebelisoa ho li-system tsa 12 VDC, 24VDC, kapa 24V FWR.
5. Lisebelisoa li ka kenngoa ts'ebetsong ka phanele ea taolo ea alamo ea mollo kapa phepelo ea motlakase.
6. Bakeng sa ho hokahanya, hokela lisebelisoa ho motlakase o khonang ho hlahisa li-pulses tsa synchronization tsa System Sensor, tlhahiso ea FACP NAC e lokiselitsoeng ho protocol ea synchronization ea System Sensor, kapa sebelisa module ea MDL3 ho hlahisa protocol ea ho hokahanya.

3825 Ohio Avenue, St. Charles, Illinois 60174
800/736-7672, FAX: 630/377-6495
www.systemsensor.com

Li-Output Horn Strobes, Chime Strobes le Strobes - Wall Mount

• Ho sebelisoa le mefuta e latelang:
• Mefuta e Tloaelehileng ea Mount Horn Strobes: P2RL, P2WL, P2RL-P, P2WL-P, P2RL-SP, P2WL-SP
• Compact Wall Mount Horn Strobes: P2GRL, P2GWL
• Lebota le Tloaelehileng la Mount Chime Strobes: CHSRL, CHSWL
• Mefuta e Tloaelehileng ea Mount Strobes: SRL, SWL, SRL-P, SWL-P, SRL-SP, SWL-CLR-ALERT
• Compact Wall Mount Strobes: SGRL, SGWL

TLHOKOMELO SEHLABAKA

• Mocheso o Tloaelehileng oa ho Sebelisa: 32°F ho isa ho 120°F (0°C ho isa ho 49°C)
• Boemo ba mongobo: 10 ho 93% Non-condensing Strobe Flash Rate 1 flash ka motsotsoana
• Lebitso Voltage: E laoloa 12VDC kapa e laoloa 24DC/FWR
• Tshebetso Voltage Range: 8 ho ​​17.5V (12V nominal) kapa 16 ho 33V (24V nominal)
• Tshebetso Voltage nang le MDL3 Sync Module: 8.5 ho ​​17.5V (12V nominal) kapa 16.5 ho 33V (24V nominal)
• Kelo ea mohala oa theminale: 12 ho isa ho 18 AWG

LITEKISO TSA LIHLAHISO LE LITLHOKOMELISO

LEBOTA LIHLAHISO	Bolelele	Bophara	Botebo
Tloaelehileng Strobe, Chime Strobe le Horn Strobe	5.6" (143mm)	4.7" (119mm)	1.25" (32mm)
Compact Strobe le Horn Strobe	5.26" (133 limilimithara)	3.46" (88 limilimithara)	1.93 (49 limilimithara)
Sesebelisoa se tloaelehileng se nang le SBBRL/WL Surface Mount Back Box	5.9" (149 limilimithara)	4.9" (125 limilimithara)	1.85" (47 limilimithara)
Sesebelisoa se kopaneng se nang le SBBGRL/WL Surface Mount Back Box	5.5" (140 limilimithara)	3.7" (94 limilimithara)	1.6" (39 limilimithara)
HLOKOMELA: SBBRL/WL Surface Mount Back Box e reretsoeng feela li-horn strobes, chime strobes le strobes. SBBGRL/WL Surface Mount Back Box e etselitsoeng li-compact horn strobes le strobes.

PHETHA LEbokose MAKHETHA

• Lihlahisoa tse Tloaelehileng tsa Ka hare tsa Literata tse 2: 4″ x 4″ x 1½”, Sehlopha se le Mong, Sehlopha sa Habeli, 4″ Octagho, SBBRL/WL (lerako), SBBGRL/WL (lerako)
• Lihlahisoa tsa Ka hare tsa Compact 2-Wire: Sehlopha se le Mong, SBBGRL/WL (lerako)
• TSEBISO: Bukana ena e tla sieloa mong'a thepa ena.

PELE E KENYA

Ka kopo bala Tataiso ea Reference ea Ts'ebetso ea Sensor ea Audible Visible, e fanang ka lintlha tse felletseng mabapi le lisebelisoa tsa tsebiso, mehala le lits'ebetso tse ikhethileng. Likopi tsa bukana ena li fumaneha ho Sensor ea Sisteme. Litataiso tsa NFPA 72 le NEMA li lokela ho hlokomeloa.
Bohlokoa: Sesebelisoa sa tsebiso se sebelisitsoeng se tlameha ho lekoa le ho hlokomeloa ho latela litlhoko tsa NFPA 72.

TLHALOSO KAKARETSO

Letoto la lisebelisoa tsa tsebiso tsa System Sensor li fana ka lisebelisoa tse ngata tse utloahalang le tse bonahalang bakeng sa tsebiso ea polokeho ea bophelo. Li-horn strobes tsa rona tse 2, chime strobes le strobes li tla le 8 ea tšimo e ka khethoang ka molumo le motsoako oa molumo le litlhophiso tsa candela tse 7 tse ka khethoang. E reretsoe lits'ebetso tsa kahare mme e lumelletsoe ho kengoa leboteng feela. E fumaneha ka meralo e 'meli e khahlehang ea ho kenya, e tloaelehileng le e kopaneng (horn strobe le strobe feela). 2-wire horn strobes le strobes ke lisebelisoa tsa tsebiso tse reretsoeng ho hlokomelisa ba lutseng ka ketsahalo ea polokeho ea bophelo. The 2-wire chime strobe ke sesebelisoa sa tsebiso ea poraefete. Lenaka le thathamisitsoe ho litlhoko tsa ANSI/UL 464 (mokhoa oa sechaba) 'me strobe e thathamisitsoe ho ANSI/UL 1638 (mokhoa oa sechaba). 2-wire chime strobe ke sesebelisoa sa tsebiso sa poraefete se reretsoeng ho lemosa basebetsi ba koetlisitsoeng ho etsa lipatlisiso ka ketsahalo ea polokeho ea bophelo le ho nka mehato e nepahetseng. Karolo ea chime ea chime strobe e thathamisitsoe ho ANSI/UL 464 (mokhoa oa poraefete) 'me karolo ea strobe e thathamisitsoe ho ANSI/UL 1638 (mokhoa oa poraefete). Lisebelisoa tsa tsebiso ea System Sensor li etselitsoe ho sebelisoa ho li-system tsa 12 VDC, 24VDC, kapa 24V FWR (full wave rectified). Lisebelisoa tsa System Sensor AV li ka kengoa tšebetsong ke phanele ea taolo ea alamo ea mollo e tsamaellanang kapa phepelo ea motlakase. Sheba moetsi oa phanele ea taolo ea alamo ea mollo e loketseng kapa phepelo ea motlakase bakeng sa tlhaiso-leseling e batsi.

System Sensor horn strobes 2-wire chime strobes, 2-wire chime strobes, le strobes li tsamaisana ka morao ka motlakase le moloko o fetileng, ho tloha 1996, oa lisebelisoa tsa tsebiso. Li tla li nolofalitsoe ka protocol ea synchronization ea System Sensor e hlokang likhokahano ho phepelo ea motlakase e khonang ho hlahisa li-pulses tsa synchronization tsa System Sensor, phallo ea FACP NAC e lokiselitsoeng ho protocol ea synchronization ea System Sensor, kapa ts'ebeliso ea module ea MDL3 ho hlahisa protocol ea khokahano.

LITEBOHO TSA ALAMO EA MOLILO

The National Fire Alarm and Signaling Code, NFPA 72, e hloka hore lisebelisoa tsohle tsa tsebiso, tse sebelisoang bakeng sa phalliso ea mohaho tse kentsoeng ka mor'a July 1, 1996, li hlahise matšoao a nakoana. Lipontšo tse ling ntle le tse sebelisoang molemong oa ho tsoa ha lia tlameha ho hlahisa lets'oao le nang le khoutu ea nakoana. System Sensor e khothaletsa lisebelisoa tsa tsebiso ea sebaka ho latela NFPA 72.

TS'ELISO DESIGN

Moqapi oa sistimi o tlameha ho etsa bonnete ba hore kakaretso ea hajoale e huloang ke lisebelisoa tse ho lupu ha e fete bokhoni ba hajoale ba phepelo ea phanele, le hore sesebelisoa sa ho qetela sa potoloho se sebetsoa ka har'a matla a eona a lekantsoeng.tage. Lintlha tsa hajoale tsa ho etsa lipalo tsena li ka fumanoa litafoleng tse ka har'a bukana. Bakeng sa boiketlo le ho nepahala, sebelisa voltago theola sebali ho Sensor ea Sisteme websaete (www.systemsensor.com).
Ha ho baloa voltage fumaneha ho sesebelisoa sa ho qetela, hoa hlokahala ho nahana ka voltage ka lebaka la ho hanyetsa terata. Ha terata e le motenya, molumo o nyanetage theoha. Litafole tsa ho hanyetsa mohala li ka fumanoa libukeng tsa motlakase. Hlokomela hore haeba terata ea Sehlopha sa A e kentsoe, bolelele ba terata bo ka fihla ho habeli ho feta kamoo bo neng bo tla ba ka teng bakeng sa li-circuits tse sa mamelleng liphoso. Palo eohle ea li-strobe ho NAC e le 'ngoe ha ea lokela ho feta 69 bakeng sa likopo tsa 24 volt.

FUMANE TS'OANE

System Sensor e fana ka mefuta e mengata e fapaneng ea melumo bakeng sa litlhoko tsa polokeho ea bophelo ba hau, ho kenyeletsoa le paterone ea 3 ea nakoana (motsotsoana o ½ ka motsotsoana, ½ oa motsotsoana, motsotsoana o ½, motsotsoana o ½, motsotsoana o ½, o tima 1½ ebe o pheta) o boletsoeng ke ANSI le NFPA 72 bakeng sa matšoao a tloaelehileng a phalliso ea tšohanyetso.
Ho khetha molumo, fetola switch ea rotary e ka morao ea sehlahisoa ho ea sebakeng seo u se batlang. (Sheba setšoantšo sa 1.)
Litlhophiso tsa lenaka tse fumanehang li ka fumanoa ho Lethathamo la 1. Litlhophiso tsa chime tse fumanehang li ka fumanoa ho Lethathamo la 2.

TAFOLE 1. LINKA MANKA

Pos	Molumo	Ho Seta Molumo
1	Ea nakoana	Phahameng
2	Ea nakoana	Tlase
3	E seng ea Nako	Phahameng
4	E seng ea Nako	Tlase
5	3.1 KHz Nakoana	Phahameng
6	3.1 KHz Nakoana	Tlase
7	3.1 KHz E seng ea Nako	Phahameng
8	3.1 KHz E seng ea Nako	Tlase

TEBELLO 2. KHIME TS'OANE

Pos	Molumo	Ho Seta Molumo
1	1 Khanya ea bobeli	Phahameng
2	1 Khanya ea bobeli	Tlase
3	1/4 Khanya ea Bobeli	Phahameng
4	1/4 Khanya ea Bobeli	Tlase
5	Chime ea nakoana	Phahameng
6	Chime ea nakoana	Tlase
7	5 Bobeli Whoop	Phahameng
8	5 Bobeli Whoop	Tlase

FUMANEHLENG LIKETSO CANDELA

Sensor ea Sisteme e fana ka mefuta e fapaneng ea litlhophiso tsa candela bakeng sa litlhoko tsa polokeho ea bophelo ba hau. E le hore o kgethe tlhahiso ya candela ya hao, lokisa switjha ya dilaete e ka morao ya sehlahiswa ho ya ho setapo se batloang sa candela ho switjha ya ho kgetha. (Sheba setšoantšo sa 2.)
Sebaka sa candela le sona se ka netefatsoa ka ho sheba fensetere e nyane e ka pele ho yuniti. Sheba Lethathamo la 3 bakeng sa litlhophiso tsa candela bakeng sa lihlahisoa tsa lebota. Lihlahisoa tsohle li kopana le light output profiles e boletsoeng ho UL Stan-dards e loketseng. (Sheba Litšoantšo 3 le 4.)

THAKO EA JOALE LE LITEKELO TSA HO UTLOA

Bakeng sa strobe, setšoantšo sa hona joale bakeng sa boemo bo bong le bo bong bo thathamisitsoe ho Lethathamo la 3. Bakeng sa strobe ea lenaka, litlhophiso tsa hona joale tsa ho hula le ho utloahala li thathamisitsoe ho Lethathamo la 4. Bakeng sa chime strobe, litlhophiso tsa hona joale tsa ho hula le ho utloahala li thathamisitsoe ho Lethathamo la 5.

TAFOLE 3. LERATO-MOUNT STROBE TRAW CURRENT (mA)

Candela	8-17.5 Metsotso	Li-Volts tsa 16-33
	DC	DC	FWR
15	88	43	60
30	143	63	83
75	-	107	136
95	-	121	155
110	-	148	179
135	-	172	209
185	-	222	257

HLOKOMELA: Lihlahisoa tse behiloeng ho 15 le 30 candela li sebetsa ka bo eona ho lisebelisoa tsa motlakase tsa ei-ther 12V kapa 24V. Lihlahisoa ha li thathamisitsoe bakeng sa ts'ebetso ea 12V DC ha e behiloe ho litlhophiso tse ling tsa candela.

SETŠOANTŠO 3. TŠOANTŠISO E LEBETSE - HORIZONTAL DIPERSION

Likhato*	Peresente ea Lintlha
0	100
5-25	90
30-45	75
50	55
55	45
60	40
65	35
70	35
75	30
80	30
85	25
90	25
Motsoako oa 45 Ka ho le letšehali	24
Motsoako oa 45 Ho ea ka botoneng	24

SETŠOANTŠO 4. PHAHAMOA E PHETHAHETSENG– LERATO HO FIHLELA FATSI

Likhato*	Peresente ea Lintlha
0	100
5-30	90
35	65
40	46
45	34
50	27
55	22
60	18
65	16
70	15
75	13
80	12
85	12
90	12

KHOPO LE PHETHA

Lithapo tsohle li tlameha ho kenngoa ho latela Melao ea Naha ea Motlakase le likhoutu tsa lehae hammoho le bolaoli bo nang le matla a ho laola. Wiring ha ea lokela ho ba bolelele bo joalo kapa boholo ba terata e ka etsang hore sesebelisoa sa tsebiso se sebetse ka ntle ho litlhaloso tsa sona tse hatisitsoeng. Likhokahano tse sa nepahalang li ka thibela tsamaiso ho lemosa batho ba lutseng ka har'a boemo ba tšohanyetso. Mehala ea terata e fihlang ho 12 AWG (2.5 mm°) e ka sebelisoa hammoho le mounting plate. Ho roala lipoleiti tse nang le liteishene tse behiloeng bakeng sa lithapo tse 12 tsa AWG.
Etsa likhokahano tsa terata ka ho hlobola hoo e ka bang 3/8″ ea insulation ho tloha pheletsong ea terata. Ebe o thellela ntlha e se nang letho ea terata tlas'a cl e loketsengamping plate le tighten the clamping plate screw. Re fana ka tataiso ea terata. Sheba setšoantšo sa 5 bakeng sa liteishene tsa likhoele le litšupiso tsa tataiso ea likhoele.

TLHOKOMELO
Qetello ea feme ha ea lokela ho fetoloa: Se ke oa penta!

TLHOKOMELO
Se ke oa tiisa ka ho fetelletseng li-screws tsa poleiti ea ho roala; sena se ka etsa hore mounting plate e fetohe.

SETŠOANTŠO 5. LITŠOANTŠISO TSA LIKHOPO, TŠEBELE E KHUTSANE, LE TSELA E HLAHANG

TS'IRELETSO SETJEKE

The 2-wire horn strobe, chime strobe le strobe li hloka feela lithapo tse peli bakeng sa matla le tlhokomelo. (Sheba setšoantšo sa 6.) Ka kopo ikopanye le moetsi oa hau oa FACP kapa moetsi oa phepelo ea motlakase bakeng sa litlhophiso tse khethehileng tsa mehala le linyeoe tse khethehileng.

SETŠOANTŠO 6. 2-KHOA POIKO

MOKHUTSANE SEHLOHO

Lisebelisoa tsa tsebiso ea System Sensor li tla le nako e khuts'oane ea selemo e fanoeng pakeng tsa li-terminals tsa 2 le 3 tsa mounting plate ho nolofalletsa ho hlahloba ts'ebetso ea sistimi ka mor'a hore sistimi e kenngoe mehala, empa pele ho ho kenya sehlahisoa sa ho qetela. (Sheba setšoantšo sa 5.) Selemo sena se tla itokolla ka bohona ha sehlahisoa se kenngoa, ho nolofalletsa ho laola tsamaiso ea ho qetela.

KHABANE

1. Hokela mounting plate lebokoseng la mateano. Plate e tloaelehileng ea ho kenya e tsamaisana le 4 ″ square, sehlopha se le seng, sehlopha se habeli, le 4 ″ octagmabokoseng a mateano. Letlapa le kopanyang le kopanyang le tsamaisana le mabokose a mateano a sehlopha se le seng. (Sheba Lipapiso 7 le 8, ka ho latellana.)
2. Hokela lithapo tsa lebala ho latela mabitso a litheminale. (Sheba Litšoantšo 5 le 6.)
3. Haeba sehlahisoa se sa lokela ho kenngoa nakong ena, sebelisa sekoahelo sa lerōle se sireletsang ho thibela tšilafalo ea li-terminals tsa wiring holim'a poleiti ea ho roala.
4. Ho hokela sehlahisoa ho mounting plate, hook li-tabs tse kaholimo ho ntlo ea sehlahisoa ka har'a li-grooves tse holim'a mounting plate. Ebe, hinge sehlahisoa ho

TAFOLE 4. LERATA-MOUNT HORN STROBE THAKO YA KHALE (mA) LE SETSOO SA MOLEMO (dBA)

			Hona joale hula (MA)																Molumo Sephetho (dBA)
Pos	Molumo	Bolumo Tlhophiso	8-17.5 VDC		16-33 VDC							16-33 FWR							8-17.5 V	16-33 V
			15	30	15	30	75	95	110	135	185	15	30	75	95	110	135	185	DC	DC	FWR
1	Ea nakoana	Phahameng	98	158	54	74	121	142	162	196	245	83	107	156	177	198	234	287	84	89	89
2	Ea nakoana	Tlase	93	154	44	65	111	133	157	184	235	68	91	145	165	185	223	271	75	83	83
3	E seng ea Nako	Phahameng	106	166	73	94	139	160	182	211	262	111	135	185	207	230	264	316	85	90	90
4	E seng ea Nako	Tlase	93	156	51	71	119	139	162	190	239	79	104	157	175	197	235	283	76	84	84
5	3.1 KHz Nakoana	Phahameng	93	156	53	73	119	140	164	190	242	81	105	155	177	196	234	284	83	88	88
6	3.1 KHz Nakoana	Tlase	91	154	45	66	112	133	160	185	235	68	90	145	166	186	222	276	76	82	82
7	3.1 KHz E seng ea Nako	Phahameng	99	162	69	90	135	157	175	208	261	104	131	177	204	230	264	326	84	89	89
8	3.1 KHz E seng ea Nako	Tlase	93	156	52	72	119	138	162	192	242	77	102	156	177	199	234	291	77	83	83

HLOKOMELA: Lihlahisoa tse behiloeng ho 15 le 30 candela li sebetsa ka bo eona ho lisebelisoa tsa motlakase tsa 12V kapa 24V. Lihlahisoa ha li thathamisitsoe bakeng sa ts'ebetso ea 12VDC ha li behiloe ho litlhophiso tse ling tsa candela.

TABLE EA 5. LEBOTA MOUNT CHIME STROBE THAKO EA TSOHLE (mA) LE SETSO SELEMO (dBA)

			Hona joale hula (MA)																Molumo Sephetho (dBA)
Pos	Khime Molumo	Bolumo Tlhophiso	8-17.5 VDC		16-33 VDC							16-33 FWR							8-17.5 V	16-33 V
			15	30	15	30	75	95	110	135	185	15	30	75	95	110	135	185	DC	DC	FWR
1	1 Ea bobeli	Phahameng	90	154	51	71	116	136	161	202	242	70	90	160	176	197	233	275	61	62	62
2	1 Ea bobeli	Tlase	89	154	50	70	115	136	154	199	238	67	88	158	175	191	232	271	56	55	55
3	1/4 Ea bobeli	Phahameng	90	154	52	72	117	137	168	201	242	69	93	159	175	198	233	272	67	70	70
4	1/4 Ea bobeli	Tlase	89	153	49	70	115	136	165	199	241	68	93	154	169	196	232	270	61	61	61
5	Ea nakoana	Phahameng	88	153	49	69	112	137	168	201	246	65	90	145	170	189	228	283	64	66	66
6	Ea nakoana	Tlase	88	152	47	68	111	136	167	196	241	64	89	142	170	188	219	282	59	60	60
7	5 Bobeli Whoop	Phahameng	91	154	52	70	113	132	176	206	243	70	93	145	168	187	223	278	76	78	78
8	5 Bobeli Whoop	Tlase	87	149	46	66	108	130	170	202	240	62	84	137	159	180	216	272	62	64	64

HLOKOMELA: Lihlahisoa tse behiloeng ho 15 le 30 candela li sebetsa ka bo eona ho lisebelisoa tsa motlakase tsa 12V kapa 24V. Lihlahisoa ha li thathamisitsoe bakeng sa ts'ebetso ea 12VDC ha li behiloe ho litlhophiso tse ling tsa candela.

boemo ba ho kenya diphini sehlahisweng ka ditheminale hodima mounting plate. Etsa bonnete ba hore li-tab tse ka morao ho ntlo ea sehlahisoa li sebelisana ka botlalo le mounting plate.
5. Sehlahisoa se sireletsehileng ka ho tiisa sekoti se le seng sa ho kenya ka pele ho ntlo ea sehlahisoa.

SEBAKA THABANA MORAKO LEbokose

1. Lebokose le ka morao la thaba le ka beoa ka kotloloho leboteng kapa siling. Ho fanoa ka borakete ea fatše e nang le sekoti sa fatše ha ho hlokahala. Bakeng sa lisebelisoa tsa boholo bo tloaelehileng bona Figure 9, le bakeng sa lisebelisoa tse kopanetsoeng bona Figure 10.
2. Lebokose la lebota le ka morao le tlameha ho hlongoa ka motsu o shebileng holimo. (Sheba setšoantšo sa 12.)
3. Ho fanoe ka masoba a khoele a khoele mahlakoreng a lebokose bakeng sa adaptara ea conduit ea ½ inch. Likoti tse ka morao tsa lebokose li ka sebelisoa bakeng sa ho kena ka morao ho ½ inch.
4. Ho tlosa ho kokota ha ½ inch, re khothaletsa hore o sebelise screw-driver ea hlooho e bataletseng, beha lehare la screwdriver ea hlooho e bataletseng karolong e ka hare ea konokono. Otla screwdriver ha u ntse u sebetsa joalo ka ha ho bontšitsoe setšoantšong sa 13.
   ELA HLOKO: Bakeng sa ho kenya ½ in., ela hloko hore u se ke ua otla motho ea kokotang haufi le ntlha e ka holimo ea lebokose le ka morao la mount back.
5. V500 le V700 mabelo a mabelo a boetse a fanoa. Sebelisa V500 bakeng sa pro e tlasefile lits'ebetso le V700 bakeng sa pro e phahamengfile lits'ebetso.
6. Ho tlosa li-turnout pliers holimo, joalo ka ha ho bontšitsoe setšoantšong sa 13.

TAMPER SEKHOPO

Bakeng sa tampKa lebaka la ho hanyetsa, screw e tloaelehileng e ka nkeloa sebaka ke sekoti sa Torx se kentsoeng.

1. Ho tlosa sekoti se hapiloeng, khutlisetsa screw 'me u sebelise khatello karolong e ka morao ea screw ho fihlela se tsoa ntlong. Kenya sebaka ka sekoti sa Torx se fanoeng. (Sheba setšoantšo sa 11.)

   

Ka kopo, sheba ho kenya bakeng sa Meeli ea Litsamaiso tsa Alamo ea Mollo

TLHOKOMELO

LIMELISO TSA LEnaka

• Lenaka le / kapa strobe li ke ke tsa sebetsa ntle le matla. Lenaka / strobe e fumana matla ho tsoa ho phanele ea mollo / ts'ireletso e shebileng sistimi ea alamo. Haeba matla a khaotsoe bakeng sa mora leha e le ofe, horn/strobe e ke ke ea fana ka temoso e lakatsehang ea molumo kapa pono.
• Lenaka le ka 'na la se ke la utluoa. Lerata la lenaka le kopana (kapa le feta) litekanyetso tsa hajoale tsa Underwriters Laboratories. Leha ho le joalo, lenaka le ka ’na la se ke la hlokomelisa motho ea robetseng hantle kapa ea sa tsoa sebelisa lithethefatsi kapa ea noang lino tse tahang. Lenaka le ka ’na la se ke la utluoa haeba le behiloe mokatong o fapaneng le oa motho ea kotsing kapa haeba le behiloe hōle haholo hoo le ke keng la utluoa lerata le kang la sephethephethe, li-air conditioner, mechine kapa lisebelisoa tsa ’mino tse ka thibelang batho ba seli ho utloa. alamo.
• Lenaka le ka ’na la se ke la utluoa ke batho ba sa utloeng hantle litsebeng.
  TLHOKOMELISO: Li-strobe li tlameha ho tsamaisoa khafetsa bakeng sa ts'ebetso ea lenaka.
• Letšoao la strobe le ka 'na la se ke la bonoa. Letšoao la temoso la elektroniki le sebelisa xenon flash tube e tšepahalang haholo. E benya bonyane hang motsotsoana o mong le o mong. The strobe ha ea lokela ho kenngoa khanyeng ea letsatsi kapa libakeng tse nang le khanya e phahameng (ho feta 60 maoto a likerese) moo khanya e ka 'nang ea hlokomolohuoa kapa e sa bonoe. The strobe e ka 'na ea se ke ea bonoa ke batho ba sa boneng hantle.
• Letšoao la strobe le ka etsa hore motho a tsietsane. Batho ba nang le karabelo e ntle ea foto mabapi le ts'usumetso ea pono ka ho ts'oaroa, joalo ka batho ba nang le lefu la sethoathoa, ba lokela ho qoba ho pepesehela nako e telele tikolohong eo mats'oao a strobe, ho kenyeletsoa le strobe ena, e kentsoeng tšebetsong.
• Letšoao la strobe le ke ke la sebetsa ho tsoa ho lisebelisoa tsa motlakase tse nang le khoutu. Lisebelisoa tsa motlakase tse sirelelitsoeng li hlahisa matla a khaotsoeng. Strobe e tlameha ho ba le mohloli o sa sitisoeng oa matla e le hore e sebetse ka nepo. System Sensor e khothalletsa hore ho lula ho sebelisoa lenaka le signal strobe hammoho e le hore likotsi tse tsoang leha e le efe ea mefokolo e ka holimo li fokotsehe.

TIISETSO EA LIMITED YA LILEMO TSE THARO

Sensor ea Sisteme e fana ka tumello ea hore sehlahisoa sa eona se koaletsoeng se se be le bofokoli ba thepa le moetso tlas'a ts'ebeliso e tloaelehileng le ts'ebeletso nako ea lilemo tse tharo ho tloha ka letsatsi la tlhahiso. Sensor ea Sisteme ha e fane ka tiisetso e 'ngoe e hlakileng bakeng sa sehlahisoa sena. Ha ho moemeli, moemeli, morekisi, kapa mosebeletsi oa Khampani ea nang le matla a ho eketsa kapa ho fetola litlamo kapa meeli ea Tiisetso ena. Boitlamo ba Khampani ba Tiisetso ena bo tla lekanyetsoa feela ho nkela karolo efe kapa efe ea sehlahisoa se fumanoeng se sa sebetse hantle ka thepa kapa moetsong tlas'a ts'ebeliso e tloaelehileng le ts'ebeletso nakong ea lilemo tse tharo ho qala ka letsatsi la tlhahiso. Ka mor'a ho letsetsa nomoro ea mahala ea Sensor ea 800-SENSOR2 (736-7672) bakeng sa nomoro ea Tumello ea ho Khutlisa, romela li-unit tse nang le bothata pos.tage prepaid ho: Honeywell, 12220 Rojas Drive, Suite 700, El Paso TX 79936.

Ka kopo, kenyelletsa molaetsa o hlalosang ho se sebetse hantle le sesosa se belaelloang sa ho hloleha. Khampani e ke ke ea tlamehile ho khutlisa likarolo tse fumanoang li sa sebetse ka lebaka la tšenyo, tšebeliso e sa utloahaleng, liphetoho, kapa liphetoho tse etsahalang ka mor'a letsatsi la tlhahiso. Ha ho moo Khampani e tla ikarabella bakeng sa litšenyehelo tse ling kapa tse sa lebelloang bakeng sa ho tlola Tiisetso ena kapa efe kapa efe, e hlahisitsoeng kapa e ka boleloang eng kapa eng, leha tahlehelo kapa tšenyo e bakiloe ke bohlasoa kapa phoso ea Khampani. Linaha tse ling ha li lumelle ho behelloa ka thoko kapa ho beheloa meeli ea tšenyo e etsahetseng ka tšohanyetso kapa ka lebaka, ka hona, moeli kapa ho behelloa ka holimo ho ka 'na ha se sebetse ho uena. Tiisetso ena e u fa litokelo tse khethehileng tsa molao, hape u ka ba le litokelo tse ling tse fapaneng ho ea ka linaha.

TLHOKOMELO FCC

Li-System Sensor Strobes le Horn/Strobes li 'nile tsa lekoa 'me tsa fumanoa li lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokoa ho lokisa tšitiso eo ka litšenyehelo tsa hae.

System Sensor® ke lets'oao la khoebo le ngolisitsoeng la Honeywell International, Inc.

I56-5845-001
©2017 Sensora ea Tsamaiso. 01-12

3825 Ohio Avenue, St. Charles, Illinois 60174 800/736-7672, FAX: 630/377-6495
www.systemsensor.com

Litokomane / Lisebelisoa

SYSTEM SENSOR P2RL-SP Siren e nang le Leseli la Strobe [pdf] Tlhophiso Tataiso P2RL-SP, P2RL-SP Siren e nang le Leseli la Strobe, Siren e nang le Leseli la Strobe, Leseli la Strobe, Leseli

Litšupiso

• Bukana ea Mosebelisi