SYSTEM SENSOR BEAMMMK Multi-Mounting Kit hore e sebelisoe le Reflective Projected Beam Smoke Detectors.

LITAELO TSA HO KENYA LE TLOBELO
PHAHAMA
Multi-mounting Kit bakeng sa ho sebelisoa le
Li-Detectors tsa Beam Smoke tse Reflective

3825 Ohio Avenue, St. Charles, Illinois 60174 800/736-7672, FAX: 630/377-6495
www.systemsensor.com

Tlhokomeliso: Bukana ena e lokela ho sieloa mong'a thepa ena.

TLHALOSO KAKARETSO

BEAMMMK e lumella li-detectors le li-reflexer tse bonts'itsoeng hore li kenngoe leboteng le otlolohileng kapa siling. Kit e lumella sebaka se eketsehileng sa ho tsamaisana ha maemo maemong ao sebui le sebonela-hōle li ke keng tsa kenngoa ka har'a 10 ° ho tse ling. Thepa e kenyelletsa lisebelisoa tse hlokahalang ho kenya yuniti e le 'ngoe ea transmitter/receiver kapa reflector e le' ngoe. (Ho kenya trans-mitter/receiver kit top mount, BEAMSMK, le eona e tlameha ho sebelisoa). Haeba transmitter/receiver le reflector li hloka sebaka se eketsehileng sa ho tsamaisana hoa hlokahala lisebelisoa tse peli. Kiti ha e tsamaisane le lisebelisoa tse bonts'ang nako e telele (BEAMLRK).
Setsi se kenyelletsa likarolo tse latelang:

Qty. Tlhaloso

• 1 Ceiling mount bracket ka hare
• 1 Borakete ea siling ka ntle
• 1 Wall bracket ea lerako
• 1 "U" borakete
• 2 "L" borakete
• 1 Sekurufu sa ho lokisa se otlolohileng (siling) #10-24 × 2 1/4 ″
• 1 Sekoti sa ho lokisa se otlolohileng (lerako) #10-24 × 13/8 ″
• Allen screw #10-24 × 1/2″
• 2 Allen screw #10-24 × 5/8″
• 2 Fender washer polasetiki
• 2 Fender washer tšepe
• 2 Polasetiki e hlatsoang #10
• 2 Washer tšepe #10
• 2 Washer metal split-lock #10
• 2 Hex nut #10-24
• 1 Allen wrench

KHOPANG MATS'OA

Kenya marakete ea siling kapa leboteng e le hore ha e behiloe, mochine o fetisang molaetsa / moamoheli le sebonela-hōle li tla ba le mola o hlakileng oa pono pakeng tsa tsona.
Sekhahla sa siling se entsoe ka likarolo tse peli tse lokelang ho kopanngoa le karolo e ka hare pakeng tsa siling le karolo e ka ntle joalokaha ho bontšitsoe Setšoantšong sa 1. Li-brackets li lokela ho kenngoa e le hore sekoti se ka pele ho sekoahelo se seng le se seng se shebane le sekoahelo se seng. Beha masakaneng feela holim'a meaho e tiileng ea moaho. Ho qoba li-alarms tse sa batleheng ka lebaka la ho sisinyeha ha lebota, u se ke oa hloella maboteng a tenyetsehang, joalo ka mabota a lishiti (sheba karolo ea Mounting Locations ea bukana ea transmitter/receiver bakeng sa lintlha tse ling).

SETŠOANTŠO 1. KOPANO YA SEILENG MOUNT BRACKET

MITAELO EA HO PHAHAMA LE KHOPO

MOTSAMAI/ MOAMOHELI
Sehlomathiso sa BEAMSMK se tlameha ho sebelisoa le transmitter/receiver ho fana ka mokhoa oa ho kena ka likhoele. Sheba Lipalo 2 ho isa ho 4 bakeng sa mohato ona.

1. Bala litaelo tsa ho kenya mochine oa ho tseba hore na ho na le boholo bo nepahetseng le palo ea lithapo tse tla sebelisoa.
2. Cheka masoba a loketseng bakeng sa conduit e feto-fetohang u sebelisa litsi tsa ho phunya tse fanoeng ka mahlakoreng kapa ka morao ho setsi sa marulelo. Sheba setšoantšo sa 2 bakeng sa lintlha. Hlokomela hore tlhōrō ea setsi sa marulelo se na le baokameli ba ntseng ba eketseha bakeng sa li-brackets tsa "L" tse sebelisitsoeng mohato o latelang. Li-conduit tsa boholo ba 1/2" kapa 3/4" lia amoheleha.
3. Kopanya masakata a "L" botlaaseng ba thaba u sebelisa li-screw tse peli tsa #10-24 × 5/8″ le li-washer tse peli #10 tse notletsoeng. Sheba setšoantšo sa 3 bakeng sa lintlha tse ling. Li-screws li lokela ho tiisoa ka ho feletseng.
4. Kopanya borakete ea "U" ho masakana a "L" u sebelisa li-screw tse peli tsa #10-24 × 1/2″ le li-fender washer tse fanoeng. Sheba setšoantšo sa 3 bakeng sa lintlha tse ling. Brakete ea “U” e lokela ho bokelloa ka har’a masakana a “L” e le hore mantsoe “U SE KE UA PENTA” a hlahelle ka pele ho kopano. Tiisa li-screws ho fihlela li batla li le monate. Kopano e lokela ho sekamela ka bolokolohi ka nqa tsohle. Li-screws li tla tiisoa ka botlalo hamorao ha ho lokisoa ho etsoa.
5. Kenya flange ea bracket ea "U" lesobeng le nang le linotlolo leboteng kapa borakete ea siling. Tsamaisa borakete pele ho ea boemong. Motheo oa holim'a thaba joale o lokela ho leketla ka har'a bracket.
6. Kenya sekoti se nepahetseng le motsoako oa washer (ebang ke lebota kapa siling) ka sekoting le lesobeng la flange ea bracket e ntseng e hola. Tiisa screw ho fihlela hoo e batlang e le monate. Kopano e ntse e lokela ho thinya ka bolokolohi ka mahlakoreng ka bobeli. Sekurufu se tla tiisetsoa ka botlalo hamorao ha tokiso e etsoa.
7. Hula khoele le khoele e tenyetsehang ka har'a masoba a phuntsoeng. At-tach nut (ha e kenyelelitsoe) ho kenya conduit le ho tiisa.
   HLOKOMELA: Netefatsa hore o siea terata e lekaneng hore e fihle ho transmitter/receiver unit ha e hoketsoe holim'a terata e holimo. Netefatsa hore u siea khoele e lekaneng e tenyetsehang e le hore yuniti ea transmitter/receiver e ka lokisoa hore e shebane le seipone.
8. Hokela yuniti ea transmitter/receiver ka mokhoa o sireletsehileng botlaaseng u sebelisa li-screw tse 'ne tsa #8-32 × 1/2″ tse fanoeng ka sesebedisoa sa BEAMSMK.
9. Fetola yuniti ea transmitter/receiver hore e shebane ka kotloloho le sebonela-hōle. Hang ha u shebiloe ka nepo, tiisa li-screw tse emeng le tse tšekaletseng.
   HLOKOMELA: Bakeng sa ts'ebetso e nepahetseng ea sesebelisoa sa marang-rang se tlameha ho behoa ka mokhoa o sireletsehileng ho netefatsa hore ha ho na motsamao o latelang oa mochine o tla etsahala ka mor'a hore ho kenngoe ho phethoe. Sheba likarolo tsa "Detector Placement and Mouning" tsa bukana ea detector bakeng sa lintlha tse ling.
10. Qetella ho kenya yuniti ea transmitter/receiver ka ho sebelisa litaelo tse kenyellelitsoeng le sesupa sa mabala.
11. Lekola sistimi joalo ka ha ho bonts'itsoe litaelong tsa detector.

LITLHAHISO TSE KHOLO: RETS'ELISITSOE
Sheba Setšoantšo sa 4 bakeng sa mohato ona.

1. Kopanya masakata a "L" ho seipone o sebelisa likurufu tse peli tsa #10-24 × 5/8″, liwasha tse peli tsa #10 tse notlelang, le liloko tse peli #10 tse fanoeng. Sheba setšoantšo sa 4 bakeng sa lintlha tse ling. Li-screws li lokela ho tiisoa ka ho feletseng.
   SETŠOANTŠO 2. LIBAKA TSA BEAMSMK WIRING
   
   SETŠOANTŠO 3. TŠEBELETSO EA LEBOTA E PHAHAMANG TŠEBELETSO EA LERATO/RECEIVER UNIT
   
2. Kopanya borakete ea "U" ho masakana a "L" u sebelisa li-screw tse peli tsa #10-24 × 1/2″ le li-fender washer tse fanoeng. Sheba setšoantšo sa 4 bakeng sa lintlha tse ling. Brakete ea “U” e lokela ho bokelloa ka har’a masakana a “L” e le hore mantsoe “U SE KE UA PENTA” a hlahelle ka pele ho kopano. Tiisa li-screws ho fihlela li batla li le monate. Kopano e lokela ho sekamela ka bolokolohi ka nqa tsohle. Li-screws li tla tiisoa ka botlalo hamorao ha ho lokisoa ho etsoa.
3. Kenya flange ea bracket ea "U" lesobeng le nang le linotlolo la lebota kapa borakete ea holim'a liseile. Tsamaisa borakete pele ho ea boemong. Joale reflector e lokela ho leketla ho tloha bracket.
   4. Kenya sekoti se nepahetseng le motsoako oa washer (ebang ke lebota kapa seiling) ka sekoting le lesobeng la flange ea bracket. Tiisa screw ho fihlela hoo e batlang e le monate. Kopano e ntse e lokela ho thinya ka bolokolohi ka mahlakoreng ka bobeli. Sekurufu se tla tiisetsoa ka botlalo hamorao ha tokiso e etsoa.
   5. Fetola seea-le-moea hore se shebane ka kotloloho le yuniti ea transmitter/receiver. Hang ha u shebiloe ka nepo, tiisa li-screw tse emeng le tse tšekaletseng.
   HLOKOMELA: Bakeng sa ts'ebetso e nepahetseng ea sesebelisoa sa beam, sets'oants'o se tlameha ho beoa ka mokhoa o sireletsehileng ho netefatsa hore ha ho na motsamao o latelang o tla etsahala kamora hore ts'ebetso e phetheloe. Sheba likarolo tsa "Detector Placement and Mouning" tsa bukana ea detector bakeng sa lintlha tse ling.
4. Lekola sistimi joalo ka ha ho bonts'itsoe litaelong tsa detector.

SETŠOANTŠO 4. SEPONISI SA SEILENG SE PHAHAMANG

firealarmresources.com 

Litokomane / Lisebelisoa

SYSTEM SENSOR BEAMMMK Multi-Mounting Kit hore e sebelisoe le Reflective Projected Beam Smoke Detectors. [pdf] Buka ea Taelo BEAMMMK Multi-Mounting Kit bakeng sa ho sebelisoa le Reflective Projected Beam Smoke Detectors, BEAMMMK, Multi-Mounting Kit hore e sebelisoe le Reflective Projected Beam Smoke Detectors, Multi-Mounting Kit, Reflective Projected Beam Smoke Detectors, Projeke ea Beam Smoke Detector, Smoke Beam, Li-detectors, li-detectors

Litšupiso

• Bukana ea Mosebelisi