Surenoo SLC1602M Series Character LCD Display
Fetileview
Likaroloana
- I2C interface, ke lithapo tse peli feela tse ka laoloang ka kotloloho, ho bonolo ho fihlella liboto tse fapaneng tsa taolo
- E ka hlahisa litlhaku tse fihlang ho 16 x 2, ts'ehetso ea ho phenya skrineng, motsamao oa cursor, le mesebetsi e meng.
- Ponahalo e ntle ebile e kopane, 'me moetso oa eona o monate ebile o motle. Moqapi o kopantsoeng haholo, ts'ebetso e tsitsitseng, mosebetsi o motle, 'mele o kopanetsoeng o nang le litekanyo tsa 87 * 32 * 13 mm.
- Onboard AiP31068L LCD mokhanni chip
- Fana ka libuka tse tšehetsang litaba tse felletseng (libukana/sample li-demos)
Mekhahlelo
- Tshebetso voltage: 3.3V/5.0V
- Khokahano ea puisano: I2C
- Mofuta oa skrine: LCD skrine
- Laola chip: Tlhaloso: AiP31068L
- Aterese ea lekhoba: 0X7C
- Bontša boholo: 64.5 x 16.0 limilimithara
- Boholo ba sehlahisoa: 87.0 x 32.0 x 13.0 (limilimithara)
- Ts'ebetso ea hajoale: 26mA(5V), 13mA (3.3V)
Tlhaloso ea Sehokelo
| Pin | Tlhaloso |
| VCC | Ho kenya motlakase ka 3.3V / 5V |
| GND | Fatše |
| SCL | Cable ea oache ea I2C |
| SDA | Cable ea data ea I2C |
Puisano Protocol
Bophahamo ba Outline
Ho sebetsa le Raspberry Pi
Setting ea Hardware
Numella I2C Interface
Bula terminal ea Raspberry Pi, kenya taelo e latelang ho kenya sebopeho sa tlhophiso.
Ebe u qala Raspberry Pi hape.
Khokahano ea Hardware
- Ha o hokela Raspberry Pi, khetha ho hokela ka thapo ea 4PIN, ka kopo sheba tafole ea ngollano e ka tlase.
- Haeba u sebelisa hlooho ea phini kapa PH2.0 4PIN interface, u lokela ho hokela ho latela tafole e latelang.
| Raspberry Pi Pin Connection Correspondence | ||
| LCD | Raspberry Pi | |
| EA-2835 | Board Pin No. | |
| VCC | 3.3V | 3.3V |
| GND | GND | GND |
| SCL | SCL.1 | 5 |
| SDA | SDA.1 | 3 |
Nka LCD1602 Module u sebelisa PH2.0 4PIN interface e le example, and connect it to the Raspberry Pi according to the above table: (Please connect according to the pin definition table. The color of the cable in the picture is for reference only, and the actual color shall prevail.) 
Example Mohlala
Tlhahlobo ea demo (test.py) 
Ho sebetsa le Pico
Khokahano ea Hardware
| Pico Pin Connection Correspondence | |
| Mojule Interface | Pico Pin |
| VCC | 3.3V |
| GND | GND |
| SCL | GP5 |
| SDA | GP4 |
Setšoantšo sa khokahano ea 'mele ke se latelang: 
Raspberry Pi
- Sebelisa SSH ho kena ho terminal ea Raspberry Pi kapa tobetsa Ctrl+Alt+T ha u ntse u sebelisa skrine ho bula terminal.
- Download and decompress the demo to the Pico C/C++ SDK directory, and the users who have not installed SDK can refer to tutorial.
python e nyenyane
- Lokisa litlhophiso ho latela tikoloho ea python, u sebelisa sistimi ea desktop ea Raspberry Pi.
- Bula Thonny IDE ea sistimi ea Raspberry Pi, hula khoutu file ho IDE, 'me u boloke LCD1602.py ho Pico file sistimi (sheba mojule oa ts'ebetso ea Window ka tlase), joalo ka ha ho bonts'itsoe setšoantšong.
Windows
python e nyenyane
- Download le decompress the sample lenaneo ho komporo ea Windows, bula pico e tsamaisanang file, sheba litlhophiso tsa tikoloho ea software ea Windows.
- Bula e jarollotsoeng sample program in Thonnty, as shown in the figure below.
Mona hape o hloka ho boloka LCD1602.py ho PICO, khetha LCD1602.py, e boloke joalo ka Raspberry pi pico, 'me u e rehe LCD1602.py. 
Qetellong, tsamaisa feela demo tlasa test.py kapa time_test.py.
Tlhahlobo ea demo: (test.py)
Ho sebetsa le Arduino
Khokahano ea Hardware
| Arduino Pin Connection Correspondence | |
| Mojule Interface | Arduino Pin |
| VCC | 5V/3.3V |
| GND | GND |
| SCL | SCL |
| SDA | SDA |
Setšoantšo sa khokahano: 
Arduino IDE
- Khoasolla sample demo ho Resource, kenya foldareng ea Arduino, 'me u tobetse habeli ho bula test.ino file, Arduino IDE e tla kenya laebrari ea mokhanni ka tlas'a foldara e tšoanang, khetha mohlala o nepahetseng oa boto ea mokhanni le nomoro ea eona ea koung, tobetsa konopo ea upload ho qala ho bokella le ho kenya demo, 'me demo e tla sebetsa ka bo eona kamora hore upload e atlehe.
- Demo ena e lekiloe mme e tsamaisoa ho boto ea nts'etsopele ea Arduino uno le boto ea nts'etsopele ea Arduino mega2560.
Ho sebetsa le ESP32
Tikoloho Setulo
Kenya ESP32 plug-in ho Arduino IDE
- Bula Arduino IDE, tobetsa konopo file hukung e kaholimo ho le letšehali, khetha Likhetho:
- Kenya sehokelo se latelang ho mookameli oa boto ea ntlafatso ea tlatsetso URL, ebe o tlanya OK. https://dl.espressif.com/dl/package_esp32_index.json
Hlokomela: Haeba u se u ntse u e-na le boto ea ESP8266 URL, u ka arola ba URLe nang le lifehelo tse kang tsena: https://dl.espressif.com/dl/package_esp32_index.json , http://arduino.esp8266.com/stable/package_esp8266com_index.json
Khoasolla liphutheloana tse hatelitsoeng 'me u kopitse liphutheloana tse senyehileng file ka tsela e latelang: 
Hlokomela: Tlosa lebitso la mosebelisi: surenoo ka lebitso la hau la mosebelisi.
Khokahano ea Hardware
- Ha o hokela ho ESP32, khetha ho hokela thapo ea 4PIN, ka kopo sheba lethathamo la mangolo la phini le ka tlase:
- Haeba u sebelisa hlooho ea phini kapa PH2.0 4PIN interface, u lokela ho hokela ho latela tafole e latelang.
| ESP32 Pin Connection Correspondence | |
| Sebopeho sa LCD | ESP32 Pin No |
| VCC | 5V/3.3V |
| GND | GND |
| SCL | GPIO22 |
| SDA | GPIO21 |
- Nka LCD1602 Module u sebelisa PH2.0 4PIN interface e le example, and connect it to the ESP32 according to the above table: (Please connect according to the pin definition table. The color of the wiring in the picture is for reference only, and the actual color shall prevail.)
- Hokela ho ESP32 joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
Sebelisa Ka Arduino IDE
Khoasolla sample demo ho Resource, kenya foldara ea ESP32, tobetsa habeli ho bula test.ino file, Arduino IDE e tla kenya laebrari ea mokhanni ka tlas'a foldara e le 'ngoe, khetha mohlala o nepahetseng oa boto ea mokhanni le nomoro ea eona ea koung, tobetsa konopo ea ho kenya ho qala ho hlophisa le ho kenya demo, mme demo e tla sebetsa ka bo eona ka mor'a hore upload e atlehe.
Ho sebetsa le Jetson Nano
Khokahano ea Hardware
When connecting Jetson nano, choose to connect with 4PIN cable, please refer to the pin correspondence table below: If you are using a pin header or PH2.0 4PIN interface, you need to connect according to the following table:
| Jetson nano Pin Connection Correspondence | ||
|
LCD |
Jetson nano | |
| BCM2835 Pin | Board Pin No. | |
| VCC | 3.3V | 3.3V/5V |
| GND | GND | GND |
| SCL | SCL.1 | 5 |
| SDA | SDA.1 | 3 |
- Nka LCD1602 Module u sebelisa PH2.0 4PIN interface e le example, and connect it to the Jetson nano according to the above table: (Please connect according to the pin definition table. The color of the wiring in the picture is for reference only, and the actual color shall prevail.)
- Hokela ho Jetson nano joalokaha ho bontšitsoe ka tlase:
- Shenzhen Surenoo Technology Co.,Ltd.
- www.surenoo.com
- Skype: Surenoo365
Lipotso Tse Botsoang Hangata
What is the communication protocol used by the LCD module?
The LCD module uses I2C communication interface for data transfer.
What is the function of the control chip AiP31068L?
The AiP31068L control chip manages the display operations and communication with the host device.
Can the LCD module be powered using both 3.3V and 5V sources?
Yes, the LCD module supports operating voltag3.3V le 5V.
Litokomane / Lisebelisoa
 |
Surenoo SLC1602M Series Character LCD Display [pdf] Bukana ea Mosebelisi SLC1602M, SA3 LC1602M, SLC1602M Series Character LCD Display, SLC1602M Series, Character LCD Display, LCD Display, Display |