Tlhaloso: Surenoo SLC1602C Series Character LCD Display
Litlhaloso
- Nomoro ea Mohlala: Setšoantšo sa S3ALC1602C
- Moetsi: Shenzhen Surenoo Technology Co.,Ltd.
- Websebaka: www.surenoo.com
TAELO TSEBISO
Lethathamo la lintlha tsa SLC1602C
Setšoantšo sa SLC1602C
* Palo ea letoto la litšoantšo e lumellana le palo ea tafole ea 1.1 e kaholimo.
TS'ELISO
Tlhaloso ea Pontšo
Tlhaloso ea Mechini
Tlhaloso ea Motlakase
Tlhaloso ea Optical
TS'OANELO TŠOANE
MOTLATSI MOTLATSI
Tlhotlhomiso ea Pin
| Pin No | Pin Lebitso | Litlhaloso |
| 1 | VSS | Sebaka, 0V |
| 2 | VDD | Phepelo ea Matla a Logic |
| 3 | V0 | Tshebetso voltage bakeng sa LCD |
| 4 | RS | Kgetha Rekoto ya Lintlha / Litaelo (H: Letšoao la Lintlha, L: Letšoao la Taelo) |
| 5 | R/W | Bala / Ngola (H: Mokhoa oa ho Bala, L: Mokhoa oa ho ngola) |
| 6 | E | Numella Letšoao |
| 7 | DB0 | Lintlha tse nyenyane tsa 0 |
| 8 | DB1 | Lintlha tse nyenyane tsa 1 |
| 9 | DB2 | Lintlha tse nyenyane tsa 2 |
| 10 | DB3 | Lintlha tse nyenyane tsa 3 |
| 11 | DB4 | Lintlha tse nyenyane tsa 4 |
| 12 | DB5 | Lintlha tse nyenyane tsa 5 |
| 13 | DB6 | Lintlha tse nyenyane tsa 6 |
| 14 | DB7 | Lintlha tse nyenyane tsa 7 |
| 15 | LED_A | Backlight Anode |
| 16 | LED_K | Backlight Cathode |
Feletseng Maximum Ratings
Litšobotsi tsa Motlakase
LIEKETSENG TS'EKO
Nete ea boleng bo amohelehang
28B285B282BEach lotho e lokela ho khotsofatsa boemo ba boleng bo hlalositsoeng ka tsela e latelang
Tlhaloso ea Lota
Lotho e le 'ngoe e bolela palo ea thomello ho moreki ka nako e le' ngoe.
Boemo ba Tlhahlobo ea Litlolo
- HLAHLOBO LETEKO
- MOSEBETSI TEKO
- TS'OANELO PONA
- PHEKO TS'ELISO
- HLAHLOBO TS'OANE
- Kenya tlas'a lamp (20w¡Á2) hole 100mm ho tloha
- Sekama 45 degree ka pele (ka morao) ho hlahloba ponahalo ea LCD.
- AQL HLAHLOBO LEBAKA
- SAMPLING TSELA: MIL-STD-105D
- SAMPLERARO LA LING: TSOANG
- TLHOKOMELO E KHOLO: 0.4% (E Khōlō)
- BOHLOKO BO NYENYANE: 1.5% (BONYANE)
- KAKARETSO: II/ TLOAELEHANG
Litekanyetso tsa Module Cosmetic
| 9 | Litšitiso tsa backlight |
|
Sheba lenane ← |
| 10 | Litšitiso tsa PCB |
* E nyane haeba e sebetsa ka nepo. E kholo haeba pontšo e hloleha. |
Sheba lenane ← |
| 11 | Mefokolo ea soldering |
*Minor if display functions correctly .Major if the display fails. |
Nyenyane |
Melao-motheo ea Setlolo sa Skrini (Ha se Tšebeliso)
| Che. | Sekoli | Kritere ea Kahlolo | Karohano | |
| 1 | Matheba | Ho ea ka Melao-motheo ea Screen Cosmetic (Operating) No.1. | Nyenyane | |
| 2 | Mela | Ho ea ka Melao ea Litlolo ea Screen (Ts'ebetso) No.2. | Nyenyane | |
| 3 | Bubbles in Polarizer | Nyenyane | ||
| Boholo: d mm | Qty e amohelehang sebakeng se sebetsang | |||
| d≦0.3 0.3
1.0 1.5 <d |
Ho hlokomoloha 3
1 0 |
|||
| 4 | Ngoapa | Ho latela matheba le mela e sebetsang mekhoa ea litlolo, Ha ho
leseli le bonahatsa holim'a phanele, li-scratches ha lia lokela ho hlolla. |
Nyenyane | |
| 5 | Boima bo lumelletsoeng | Ka holimo liphoso li lokela ho aroloa ho feta 30mm mong ho e mong. | Nyenyane | |
| 6 | Mebala | Eseng ho hlokomeleha coloration in the viewsebaka sa liphanele tsa LCD.
Mofuta o khantšitsoeng ka morao o lokela ho ahloloa ka mabone a morao-rao feela. |
Nyenyane | |
| 7 | Tšhilafatso | Eseng ho hlokomeleha. | Nyenyane | |
Melao ea Setlolo ea Sekirini (Ts'ebetso)
| Che. | Sekoli | Kritere ea Kahlolo | Karohano | |
| 1 | Matheba | A) Hlakileng | Nyenyane | |
| Boholo:d mm | Qty e amohelehang sebakeng se sebetsang | |||
| d≦0.1 0.1
0.2 0.3 <d |
Ho hlokomoloha 6
2 0 |
|||
| Tlhokomeliso: Ho kenyeletsoa masoba a phini le matheba a sa sebetseng a tlamehang ho ba ka har'a boholo ba pixel e le 'ngoe.
B) Ha hoa hlaka |
||||
| Boholo:d mm | Qty e amohelehang sebakeng se sebetsang | |||
| d≦0.2 0.2
0.5 0.7 <d |
Ho hlokomoloha 6
2 0 |
|||
| 2 | Mela |  |
Nyenyane | |
'Ho hlakile' = Moriti le boholo ha li fetoloe ke Vo.
'Ha ea hlaka' = Moriti le boholo li fetotsoe ke Vo.
| Che. | Sekoli | Kritere ea Kahlolo | Karohano |
| 3 | Mohala oa ho hohla | Eseng ho hlokomeleha. | |
| 4 | Boima bo lumelletsoeng | Ka holimo liphoso li lokela ho aroloa ho feta 10mm mong ho e mong. | Nyenyane |
| 5 | Mookoli | Eseng ho hlokomeleha. | Nyenyane |
| 6 | Boholo ba letheba | Ho ba 95% ~ 105% ea boholo ba matheba (Mofuta.) ho taka. | Nyenyane |
| Bofokoli bo itseng ba letheba le leng le le leng (ex.pin-hole) bo lokela ho nkoa e le letheba'. (sheba Screen Cosmetic Criteria (Operating) No.1) | |||
| 7 | Khanya (Mojule oa ho khantša morao feela) | Khanya Uniformity e tlameha ho ba BMAX/BMIN≦2
Arola sebaka se sebetsang ho tse 4 ho ea holimo le ho ea holimo. Lekanya lintlha tse 5 tse bontšitsoeng setšoantšong se latelang.
|
Nyenyane |
| 8 | Bapisa ho Tšoanang | Phapang Uniformity e tlameha ho ba BmAX/BMIN≦2 Lekanya lintlha tse 5 tse bontšitsoeng setšoantšong se latelang.
Methalo e tsoetsoeng e arola sebaka se sebetsang ho tse 4 ho ea holimo le ho ea holimo. Lintlha tsa ho lekanya li fumaneha likarolong tse fapaneng tsa mola o nang le lebelo.
Hlokomela: BMAX - Max.boleng ka tekanyo ho lintlha tse 5. BMIN – Min.boleng ka tekanyo ho dintlha tse 5. O - Lintlha tsa ho lekanya ka ￠10mm. |
Nyenyane |
Hlokomela:
|
|||
TS'ELISO SEBELISA
- Ho Tšoara Litlhokomelo
- Sesebelisoa sena se kotsing ea ho senyeha ha Electro-Static Discharge (ESD). Ela hloko litemoso tsa Anti-Static.
- SUR panel display e entsoe ka khalase. Se ke oa e tšosa ka ho e theola kapa ho e ama. Haeba
- SUR display panel e senyehile mme ntho ea kristale ea metsi ea tsoa, etsa bonnete ba hore ha e kene molomong oa hau. Haeba ntho eo e ama letlalo kapa liaparo tsa hao, e hlatsoe ka sesepa le metsi.
- Se ke oa sebelisa matla a feteletseng sebakeng sa ponts'o sa SUR kapa libakeng tse hokahaneng kaha sena se ka etsa hore 'mala o fapane.
- The polarizer covering the SUR display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully
- Haeba sebaka sa ponts'o sa SUR se silafala, phefumoloha holimo 'me u se hlakole ka bonolo ka lesela le bonolo le omeletseng. Haeba e silafalitsoe haholo, moisten lesela ka e 'ngoe ea tse latelang tsa Isopropyl kapa joala.
- Lisebelisoa tse ling ntle le tse boletsoeng ka holimo li ka senya polarizer. Haholo-holo, u se ke ua sebelisa Metsi.
- Itlhokomele ho fokotsa ho bola ha electrode. Ho bola ha li-electrode ho potlakisoa ke marotholi a metsi, condensation ea mongobo kapa phallo ea hona joale sebakeng se nang le mongobo o phahameng.
- Kenya SUR LCD Module ka ho sebelisa likoti tse ntseng li eketseha. Ha o kenya mojule oa LCD etsa bonnete ba hore ha o na ho sotha, ho sotha le ho sotha. Haholo-holo, u se ke ua hula ka likhoka kapa ua koba thapo kapa thapo ea backlight.
- Do not attempt to disassemble or process SCIR LCD module.
- NC terminal e tlameha ho buloa. Se hokela letho.
- Haeba motlakase oa potoloho ea logic o timme, u se ke ua sebelisa matšoao a ho kenya.
- Ho thibela ho senngoa ha likarolo ka motlakase o tsitsitseng, ela hloko ho boloka tikoloho e ntle ea mosebetsi.
- Etsa bonnete ba hore o theola 'mele ha o sebetsana le li-module tsa SUR LCD.
- Lisebelisoa tse hlokahalang bakeng sa ho kopanya, tse kang litšepe tsa solder, li tlameha ho thehoa hantle.
- Ho fokotsa palo ea motlakase o tsitsitseng o hlahisoang, u se ke ua tsamaisa kopano le mosebetsi o mong tlas'a maemo a omileng.
- Module ea LCD e koahetsoe ka filimi ho sireletsa bokaholimo ba pontšo. E-ba hlokolosi ha u ebola filimi ena e sireletsang kaha motlakase o tsitsitseng o ka hlahisoa.
- Litlhokomelo tsa Phepelo ea Matla
- Khetholla, 'me ka linako tsohle, hlokomela litekanyetso tse felletseng bakeng sa bakhanni ba logic le ba LC. Hlokomela hore ho na le phapang pakeng tsa mehlala.
- Thibela ts'ebeliso ea reverse polarity ho VDD le VSS, leha ho le joalo ka bokhuts'oane.
- Sebelisa mohloli o hloekileng oa motlakase o se nang li-transients. Maemo a matla a matla ka linako tse ling aa sisinyeha 'me a ka feta litekanyetso tse phahameng tsa li-module tsa SUR.
- Matla a VDD a mojule oa SUR le ona a lokela ho fana ka matla ho lisebelisoa tsohle tse ka kenang ponts'ong. Se ke oa lumella bese ea data ho tsamaisoa ha phepelo ea logic ho module e tingoa.
- Litlhokomelo tsa Ts'ebetso
- U SE KE UA plug kapa ho ntša mojule oa SUR ha sistimi e ts'oaroa.
- Fokotsa bolelele ba thapo lipakeng tsa mojule oa SUR le MPU e amohelang.
- Bakeng sa mehlala e nang le mabone a ka morao, u se ke ua tima lebone la morao ka ho sitisa mohala oa HV. Li-inverters tse theolelang li hlahisa voltagmaemo a feteletseng a ka arc ka har'a thapo kapa skrineng.
- Sebetsa SUR module ka har'a meeli ea litekanyetso tsa mocheso oa modules.
- Litlhokomelo tsa Mechini/Tikoloho
- Solder e sa nepahalang ke sesosa se seholo sa bothata ba module. Tšebeliso ea flux cleaner ha e khothalletsoe kaha e ka 'na ea kenella ka tlas'a khokahanyo ea electrometric mme ea baka ho hlōleha ha pontšo.
- Mount SUR module e le hore e se ke ea e-ba le torque le khatello ea mochine.
- Bokaholimo ba phanele ea LCD ha ea lokela ho ts'oaroa kapa ho ngolisoa. Sebaka se ka pele se bonts'ang ke polarizer ea polasetiki e ngoloang habonolo. Qoba ho kopana le ho hloekisa hafeela ho hlokahala ka k'hothone e bonolo, e monyang dampe entsoeng ka petroleum benzene.
- Kamehla sebelisa mokhoa oa anti-static ha u ntse u sebetsana le mojule oa SUR.
- Thibela ho bokellana ha mongobo holim'a mojule le ho ela hloko lithibelo tsa tikoloho bakeng sa nako ea ho boloka
- U se ke ua boloka letsatsi le chabile
- Haeba ho tsoa ha thepa ea kristale ea metsi ho lokela ho etsahala, qoba ho kopana le thepa ena, haholo-holo ho kenngoa. Haeba 'mele kapa liaparo li silafatsoa ke lintho tse metsi tsa kristale, li hlatsoe hantle ka metsi le sesepa
- Litlhokomelo tsa polokelo
- Ha u boloka li-module tsa LCD, qoba ho pepesehela khanya ea letsatsi kapa khanya ea fluorescent l.amps. Boloka li-module tsa SUR ka mekotleng (qoba mocheso o phahameng / mongobo o phahameng le mocheso o tlaase ka tlase ho OC Nako le nako ha ho khoneha, li-module tsa SUR LCD li lokela ho bolokoa maemong a tšoanang le ao li rometsoeng ho tsona ho tloha k'hamphani ea rona.
- Ba bang
Likristale tsa mokelikeli li tiisa tlas'a mocheso o tlase (ka tlas'a mocheso oa mocheso oa polokelo) o lebisang ho chebahalo e fosahetseng kapa ho hlahisa li-bubble tsa moea (tse ntšo kapa tse tšoeu). Li-bubble tsa moea le tsona li ka hlahisoa haeba mojule o le tlas'a mocheso o tlase. Haeba li-module tsa SUR LCD li 'nile tsa sebetsa ka nako e telele li bontša mekhoa e tšoanang ea ponts'o, mekhoa ea ho bonts'a e ka' na ea sala skrineng e le litšoantšo tsa ghost 'me ho ka hlaha phapang e nyane ea phapang. Boemo bo tloaelehileng ba ts'ebetso bo ka fumanoa hape ka ho emisa tšebeliso ka nako e itseng. Hoa lokela ho hlokomeloa hore ketsahalo ena ha e ame hampe ts'episo ea ts'ebetso. Ho fokotsa ts'ebetso ea ts'ebetso ea li-module tsa LCD tse bakoang ke timetso e bakoang ke motlakase o tsitsitseng joalo-joalo, itloaetse ho qoba ho tšoara likarolo tse latelang ha u sebetsana le li-modules.- Sebaka se pepesitsoeng sa boto ea potoloho e hatisitsoeng.
- Likarolo tsa li-electrode tsa terminal.
SEBELISA LCD MODULE
- Liquid Crystal Display Modules
- SUR LCD e entsoe ka khalase le polarizer. Ela hloko lintho tse latelang ha u tšoara.
- Ka kopo, boloka mocheso ka har'a sebaka se itseng seo u ka se sebelisang le ho se boloka. Ho senyeha ha polarization, ho hlahisa li-bubble kapa ho tlosoa ha polarizer ho ka etsahala ka mocheso o phahameng le mongobo o phahameng.
- Se ke oa ama, oa sututsa kapa oa hohla li-polarizer tse pepesitsoeng ka eng kapa eng e thata ho feta loto ea pentšele ea HB (khalase, li-tweezers, joalo-joalo).
- N-hexane e khothalletsoa ho hloekisa li-adhesives tse sebelisetsoang ho hokela li-polarizer tse ka pele / tse ka morao le li-reflectors tse entsoeng ka lintho tse phelang tse tla senngoa ke lik'hemik'hale tse kang acetone, toluene, ethanol le isopropylalcohol.
- Ha sefahleho sa SUR se fetoha lerole, hlakola ka bonolo ka k'hothone e monyang kapa lintho tse ling tse bonolo joalo ka chamois e kolobisitsoeng ka benzin ea petroleum. Se ke oa hohla ka thata ho qoba ho senya bokaholimo ba pontšo.
- Hlakola marotholi a mathe kapa a metsi hang-hang, ho kopana le metsi ka nako e telele ho ka baka deformation kapa mmala ho fela.
- Avoid contacting oil and fats
- Ho koaheloa ka holim'a metsi le ho kopana le li-terminals ka lebaka la serame ho tla senya, ho silafatse kapa ho silafatsa li-polarizer. Kamora hore lihlahisoa li lekoa ka mocheso o tlase li tlameha ho futhumatsoa ka har'a setshelo pele li tla ke ho kopana le moea oa mocheso oa kamore.
- Se ke oa beha kapa oa hokela eng kapa eng sebakeng sa ponts'o sa SUR ho qoba ho siea matšoao a bulehile.
- Se ke oa tšoara pontšo ka matsoho a sa roala letho. Sena se tla silafatsa sebaka sa ponts'o 'me se fokolise ho kenella lipakeng tsa li-terminals (litlolo tse ling li etselitsoe li-polarizers).
- Joalo ka ha khalase e robeha. E atisa ho fetoha kapa ho qhekelloa nakong ea ho sebetsana haholo-holo ka mathōko. Ka kopo qoba ho liha kapa ho soma.
- Ho kenya LCD Modules
- Koahela bokaholimo ka poleiti e sireletsang e bonaletsang ho sireletsa polarizer le LC cell.
- When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plate should have enough height to avoid causing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be ÷ 0.1mm.
- Tlhokomeliso ea ho Ts'oara LCD Modules
Kaha SUR LCM e 'nile ea bokelloa le ho lokisoa ka tekanyo e phahameng ea ho nepahala; qoba ho sebelisa litšisinyeho tse feteletseng ho module kapa ho etsa liphetoho kapa lintlafatso ho eona.- Se ke oa fetola, oa fetola kapa oa fetola sebopeho sa tab e foreiming ea tšepe.
- U se ke ua etsa masoba a eketsehileng holim'a boto ea potoloho e hatisitsoeng, fetola sebopeho sa eona kapa u fetole maemo a likarolo tse lokelang ho khomareloa.
- Do not damage or modify the patter writing on the printed circuit board
- Ho hang u se ke ua fetola sekhahla sa rabara ea qoaha (rabara e tsamaisang) kapa sehokelo sa tiiso ea mocheso.
- Ntle le ho kopanya sebopeho, u se ke ua etsa liphetoho leha e le life kapa liphetoho ka tšepe ea soldering.
- Se ke oa liha, oa inama kapa oa sotha SUR LCM.
- Taolo ea ho tsoa ha Electro-Static
- Kaha mojule ona o sebelisa CMOS LSI, tlhokomelo e ts'oanang e lokela ho lefshoa ho tsoa ha electrostatic joalo ka CMOS IC e tloaelehileng.
- Etsa bonnete ba hore ha u fane ka LCM ha u na matla.
- Pele o tlosa LCM ka har'a mokotla oa eona oa ho paka kapa o e kenyelletsa sete, etsa bonnete ba hore mojule le 'mele oa hau li na le matla a tšoanang a motlakase.
- Ha o kopanya terminal ea LCM, etsa bonnete ba hore mohloli oa matla a AC bakeng sa tšepe ea solder ha o lutle.
- Ha o sebelisa screwdriver ea motlakase ho hokela LCM, screwdriver e lokela ho ba ea matla a fatše ho fokotsa ka hohle kamoo ho ka khonehang phetiso efe kapa efe ea maqhubu a motlakase e hlahisang litlhase tse tsoang ho sehahlauli sa enjene.
- Ka hohle kamoo ho ka khonehang etsa hore matla a motlakase a liaparo tsa hau tsa mosebetsi le tsa benche ea mosebetsi e be monyetla oa fatše.
- Ho fokotsa tlhahiso ea motlakase o tsitsitseng e-ba hlokolosi hore moea o mosebetsing ha o omisitsoe haholo. Ho kgothaletswa hore ho be le mongobo o lekanyeditsweng wa 50-60%.
- Tlhokomeliso bakeng sa ho rekisoa ho SUR LCM
- Ela hloko lintlha tse latelang ha u etsa terata ea loto, thapo ea sehokelo le tse ling ho LCM.
- Soldering iron temperature : 280 °C10°C -Soldering time: 3-4 sec.
- Solder: eutectic solder. If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a cover during soldering to prevent any damage due to flux spatters.
- Ha ho soasoa phanele ea electroluminescent le boto ea PC, phanele le boto ha lia lokela ho koalloa ho feta makhetlo a mararo. Nomoro ena e phahameng e khethoa ke mocheso le maemo a nako a boletsoeng ka holimo, le hoja ho ka 'na ha e-ba le phapang e itseng ho itšetlehile ka mocheso oa tšepe ea soldering.
- Ha u tlosa phanele ea electroluminescent ho boto ea PC, etsa bonnete ba hore solder e qhibilihile ka ho feletseng, pad e rekisoang ka boto ea PC e ka senyeha.
- Tlhokomeliso bakeng sa Ts'ebetso
- Viewangle ing e fapana le phetoho ea mokelikeli oa kristale oa ho khannatage (VO). Fetola VO ho bontša phapang e ntle ka ho fetisisa.
- Ho khanna SUR LCD ka voltage ka holimo ho moeli e khutsufatsa bophelo ba eona.
- Nako ea ho arabela e lieha haholo ka mocheso o ka tlase ho mocheso o sebetsang. Leha ho le joalo, sena ha se bolele hore LCD e tla be e tsoile taolong. E tla hlaphoheloa ha e khutlela mocheng o boletsoeng oa mocheso.
- Haeba sebaka sa ponts'o sa SUR se sutumetsoa ka thata nakong ea ts'ebetso, ponts'o e tla fetoha e sa tloaelehang. Leha ho le joalo, e tla khutlela ho se tloaelehileng haeba e tingoa ebe e khutlela ho eona.
- Condensation ho li-terminals e ka baka karabelo ea electrochemical e sitisang potoloho ea terminal. Ka hona, e tlameha ho sebelisoa tlas'a maemo a lekanyelitsoeng a 40 ° C, 50% RH.
- Ha o bulela matla, kenya lets'oao le leng le le leng ka mor'a molumo o motle/negativetage fetoha e tsitsitseng.
- Tiisetso e Lekanyelitsoeng
- Ntle le haeba ho lumellanoe pakeng tsa SUR le moreki, SUR e tla nkela sebaka kapa e lokise li-module tsa LCD tse fumanoang li sa sebetse hantle ha li hlahlojoa ho latela maemo a kamohelo a SUR LCD (likopi tse fumanehang ha li kopa) nako ea selemo ho tloha ka letsatsi la thomello. Litšitiso tsa litlolo / tsa pono li tlameha ho khutlisetsoa ho SUR nakong ea matsatsi a 90 ka mor'a ho romelloa. Netefatso ea letsatsi le joalo e tla itšetleha ka litokomane tsa thepa. Tiisetso ea melato ea SUR e lekanyelitsoe ho lokisoa le/kapa ho nchafatsoa ho latela lipehelo tse boletsoeng ka holimo. SUR e ke ke ea ikarabella bakeng sa liketsahalo tse latelang kapa tse tla latela.
- LEANO LA THEPA E KHUTLISOANG
Ha ho na waranti e ka fanoang haeba mehato e boletsoeng ka holimo e hlokomolohuoe. E tloaelehileng examplisosa tsa litlolo ke tsena:- Broken LCD glass. -PCB eyelet damaged or modified.
- Li-conductors tsa PCB li senyehile.
- Potoloho e fetotsoe ka tsela efe kapa efe, ho kenyelletsa le ho eketsoa ha likarolo.
- PCB tampe entsoe ka ho sila, ho betla kapa ho penta varnish.
- Soldering to or modifying the bezel in any manner. Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB eyelet’s, conductors and terminals
Shenzhen Surenoo Technology Co.,Ltd.
www.surenoo.com
Skype: Surenoo365
LBH
Can I use this LCD module with Arduino?
Yes, this LCD module can be easily interfaced with Arduino using the provided pin configuration and library support.
Litokomane / Lisebelisoa
 |
Tlhaloso: Surenoo SLC1602C Series Character LCD Display [pdf] Bukana ea Mosebelisi SA3 LC1602C, SLC1602C Series Character LCD Display, SLC1602C Series, Character LCD Display, LCD Display, Display |