UM3239
Bukana ea mosebelisi
Ho qala ka motsamao oa X-NUCLEO-IKS4A1
MEMS le tikoloho
boto ea katoloso ea sensor bakeng sa STM32 Nucleo
Ketso ea kenyelletso
X-NUCLEO-IKS4A1 ke MEMS e tsamaeang le boto ea tlhahlobo ea sensor ea tikoloho e nang le boto e kholo ea XNUCLEO-IQS4A1, e tsamaisang MEMS le li-sensor tsa tikoloho, le boto ea tlatsetso ea STEVALMKE001A, e tsamaisang li-electrode tsa Qvar swipe.
E lumellana le sebopeho sa sehokelo sa Arduino UNO R3 'me e na le li-accelerometers tsa LSM6DSO16IS le LSM6DSV16X MEMS 3D, LIS2MDL 3-axis magnetometer, LIS2DUXS12 3-axis accelerometer, LPS22DF MEMSH40 sensor ea mocheso le STHDS, SHT1D, STAD, STAD, SHTTS, le STAD22. sensor ea mocheso.
X-NUCLEO-IKS4A1 e sebelisana le microcontroller ea STM32 ka phini ea I²C kapa, bakeng sa li-sensor tsa kantle tse kentsoeng ho adaptara ea DIL24, SPI Pins.
Rea qala
1.1 Litlhokahalo tsa Hardware
X-NUCLEO-IKS4A1 e etselitsoe ho sebelisoa le liboto tsa STM32 Nucleo (etela www.st.com bakeng sa lintlha tse ling).
X-NUCLEO-IKS4A1 e tlameha ho hokeloa lithakhileng tse tsamaellanang tsa boto efe kapa efe ea STM32 Nucleo ka sehokelo sa Arduino UNO R3.
Likarolo tsa X-NUCLEO-IKS4A1 li na le maikutlo a ESD 'me, kaha boto e na le li-connectors tsa ho feta tsa banna / basali, ke habohlokoa ho e sebetsana ka hloko ho qoba ho koba kapa ho senya lithapo.
Litlhoko tsa tsamaiso
Ho phethela ho seta sistimi, o hloka:
- Windows® (7, 8, 10) PC
- thapo ea USB ea mofuta oa A ho isa ho e nyane ea B ho hokela STM32 Nucleo ho komporo
- firmware board le software package (X-CUBE-MEMS1) e kentsoeng ho PC ea mosebelisi
Tlhaloso ea Hardware
Boto e u lumella ho lekola tšebetso ea mochini oa MEMS accelerometer, gyroscope le magnetometer, le mongobo oa tikoloho, mocheso le lisensara tsa khatello, ka bese ea puisano ea I²C.
E boetse e lumella tlhahlobo e felletseng ea lits'ebetso tsohle tsa LSM6DSO16IS le LSM6DSV16X le Qvar touch le boitšisinyo ba ho swipe. Ho boetse ho na le monyetla oa ho hokela sensor ea STHS34PF80 IR ho thusa lits'ebetso tsa ho bona boteng le ho sisinyeha.
Boto e na le:
- LSM6DSO16IS: MEMS 3D accelerometer (±2/±4/±8/±16 g) + 3D gyroscope (±125/±250/±500/±1000/±2000 dps) le ISPU (Intelligent Processing Unit)
- LIS2MDL: MEMS 3D magnetometer (± 50 gauss)
- LIS2DUXS12: matla a tlase haholo a MEMS 3D accelerometer (±2/±4/±8/±16 g) ka Qvar, AI, le anti-aliasing
- LPS22DF: Sensor ea khatello e tlase ea matla a tlase le e nepahetseng haholo ea MEMS, 260-1260 hPa e felletseng ea phallo ea dijithale
- Setšoantšo sa SHT40AD1B
- STTS22H: Phallo e tlasetage, matla a tlase haholo, sensor ea mocheso e nepahetseng ea 0.5 °C (-40°C ho ea +125°C)
- LSM6DSV16X: MEMS 3D accelerometer (±2/±4/±8/±16 g) + 3D gyroscope (±125/±250/±500/±1000/±2000/±4000 dps) ka fusion ea kutlo e kentsoeng, AI, Qvar
- DIL 24-pin socket e fumaneha bakeng sa li-adapter tse ling tsa MEMS le li-sensor tse ling
- Laeborari ea mahala ea ntlafatso e felletseng ea firmware le example bakeng sa li-sensor tsohle tse lumellanang le firmware ea STM32Cube
- E na le elektrode ea Qvar touch / swipe
- I²C sensor hub hub ho LSM6DSO le LSM6DSV16X lia fumaneha
- Tšebelisano ea MIPI I3C® bakeng sa puisano le LIS2DUXS12, LSM6DSV16X le LPS22DF
- E lumellana le liboto tsa STM32 Nucleo
- E na le sehokelo sa Arduino UNO R3
- E na le sehokelo sa indasteri bakeng sa nts'etsopele ea ts'ebeliso ea IR sensor (STHS34PF80). E ka hokahana ka nako e le 'ngoe ea MEMS ea kantle ka adaptara ea DIL24
- Khokahano e teng bakeng sa lits'ebetso tsa module ea kh'amera ea kantle e kopantsoeng le LIS2DUXS12 ka aux SPI (3/4 w)
- RoHS e lumellana
- WEEE e lumellana
- UKCA e lumellana
Sesebelisoa se seng le se seng se na le phepelo e arohaneng ea matla ho lumella tekanyo ea tšebeliso ea matla ea sensor e 'ngoe le e' ngoe.
Boto ea katoloso ke phepelo ea motlakase e tsamaellanang le liboto tsa STM32 Nucleo: e phahamisa LDO ho hlahisa 1.8 V bakeng sa li-sensor tsohle tsa MEMS ntle le sensor ea kantle e behiloeng ho adaptara ea DIL24, e ka fanoang ka bobeli ho tloha 1.8 V le 3.3 V (phepelo e kholo ho tsoa ho Nucleo board).
Lipontšo tsohle pakeng tsa li-sensor le boto e kholo li fetoleloa ke boemo bo fetohang.
Tlhophiso ea borokho ea kamehla
Mosebelisi a ka hlophisa likarolo tse 'maloa tsa X-NUCLEO-IKS4A1 ka marokho a' maloa a solder a ka siuoang a butsoe (a sa kenngoe) kapa a koetsoe (a hlophisoa) ho hlophisa litlhophiso tse fapaneng tsa lisebelisoa.
Setšoantšo sa thibela
LSM6DSO16IS le LSM6DSV16X li na le I²C sensor hub e li lumellang ho itšoara joalo ka I²C master bakeng sa lisebelisoa tse ling tsa makhoba tse hoketsoeng ka bese ea I²Caux. Litlhophiso tse fapaneng tsa libese lia khoneha ho khetha I²C master ea li-sensor tsa tikoloho/DIL24.
Mokhoa oa 1: khokahano ea bese e tloaelehileng ea I²C (lisensara kaofela)
Ka mokhoa o tloaelehileng oa I²C, lisebelisoa tsohle li hokahantsoe le boto e kholo ea kantle ka bese e ts'oanang ea I²C.
Sebopeho sa boto ke:
- J4: 1-2, 11-12 (STM_SDA = SENS_SDA, HUB_SDx = GND)
- J5: 1-2, 11-12 (STM_SCL = SENS_SCL, HUB_SCx = GND)
Mokhoa oa 2: LSM6DSO16IS I²C sensor hub (li-sensor tsohle)
Ka mokhoa ona oa I²C oa sensor hub, hoa khoneha ho matlafatsa tšebetso ea 6-axes IMU (Inertial Measurement Unit) ka ho bokella lintlha tsa kantle ka taolo e tobileng ea li-sensor tsa tikoloho (mocheso, khatello le magnetometer) le sensor ea kantle. (DIL24) ka bese ea tlatsetso ea I²Cz “SENS_I2C”. LSM6DSV16X, LIS2DUXS12 le SHT40AD1B li ntse li hokahane le bese e kholo ea "uC_I2C" e tsoang botong ea kantle.
Sebopeho sa boto ke:
- J4: 5-6 (HUB2_SDx = SENS_SDA)
- J5: 5-6 (HUB2_SCx = SENS_SCL)
Mokhoa oa 3: LSM6DSV16X I²C hub ea sensor
Sebakeng sena sa sensor, hoa khoneha ho matlafatsa mesebetsi ea 6-axes IMU (Inertial Measurement Unit) ka ho bokella lintlha tsa ka ntle ka ho laola ka ho toba li-sensor tsa tikoloho (mocheso, khatello le magnetometer) le sensor ea ka ntle (DIL24). ) ka bese e thusang ea I2C "SENS_I2C". LSM6DSO16IS, LIS2DUXS12 le SHT40AD1B li ntse li hokahane le bese e kholo ea "uC_I2C" e tsoang botong ea kantle.
Sebopeho sa boto ke:
- J4: 7-8 (HUB1_SDx = SENS_SDA)
- J5: 7-8 (HUB1_SDx = SENS_SDA)
Adapter ea DIL24 (ho ea ho I²C2): SB16, SB21
Ha ea kenngoa: SB6, SB10, SB12, SB14, SB18, SB19, SB20, SB22
Mokhoa oa 4: DIL24 I²C sensor hub (li-sensor tsohle)
Haeba sensor e nang le ts'ebetso e kentsoeng ea sensor hub e kentsoe botong ka adaptara ea DIL24, ho ka khonahala ho sebelisa ts'ebetso ena joalo ka LSM6DSO16IS le LSM6DSV16X.
Tokisong ena, ho ka hlokahala ho hokahanya DIL24 le boto ea kantle ka mela ea SPI ho qoba khohlano ea aterese beseng ea I2C le LSM6DSO16IS le LSM6DSV16X. Sena se etsoa ka ho fetola tlhophiso ea SBx.
Sebopeho sa boto ke:
- J4: 9-10 (DIL_SDx = SENS_SDA)
- J5: 9-10 (DIL_SDx = SENS_SDA)
Mokhoa oa 5: LSM6DSO16IS joalo ka molaoli oa Qvar
Tlhophiso ena, hoa khoneha ho sebelisa electrode ea swipe ea Qvar e nang le lisebelisoa (ka ho e kenya ho lihokelo tsa JP6 le JP7) ka LSM6DSO16IS.
Sebopeho sa boto ke:
- J4: 3-4 (HUB1_SDx = QVAR1)
- J5: 3-4 (HUB1_Scx = QVAR2)
3.3 Khetho ea aterese ea Sensor I²C
Lisensara tse ngata li lumella khetho ea aterese ea I²C ea LSB ka ho hulela phini ea SD0 tlase kapa holimo. Boto e na le marokho a solder ho laola boemo ba SD0.
Lethathamo la 1. Marokho a rekisoang bakeng sa aterese ea I²C
Aterese e ngotsoeng ka mongolo o motenya ke liaterese tsa kamehla tsa I2C
| Sensoro | SD0 e tlase | SD0 e phahameng |
| STTS22H (U8) | KETSA = 71h | |
| LIS2DUXS12 (U5) | SB19 ADD=31h | SB20 ADD=33h |
| LSM6DSO16IS (U9) | SB35 ADD=D5h | SB34 ADD=D7h |
| LPS22DF (U6) | SB31 ADD=B9h | SB29 ADD=BBh |
| LIS2MDL (U7) | KENYA =3Ch | KENYA =3Ch |
| SHT40AD1B (U10) | KETSA = 89h | KETSA = 89h |
| Adapter ea DIL24 (J1) | SB43/SB44 | SB41/SB42 |
| LSM6DSV16X (U4) | SB17 ADD=D5h | SB15 ADD=D7h |
3.4 Tekanyo ea tšebeliso ea sensor hajoale
Boto ea katoloso ea X-NUCLEO-IKS4A1 e na le li-resistors tsa OR tse lumellang tekanyo e arohaneng ea tšebeliso ea hona joale bakeng sa sensor ka 'ngoe.
Ho lekanya tšebeliso ea hona joale, hokela ammeter ho li-pads tse loketseng.
Kaha li-sensor li na le tšebeliso e tlase haholo ea hona joale, u lokela ho beha sebaka se loketseng 'me u sebelise ammeter e nang le boima bo tlasetage.
Letlapa la 2. Resistors / jumpers bakeng sa tekanyo ea tšebeliso ea hona joale
| Sensoro | Mohanyetsi/ jumper |
| LIS2MDL (U7) | R18 |
| LSM6DSO16IS (U9) | R21 |
| SHT40AD1B (U10) | R22 |
| LIS2DUXS12 (U5) | R16 |
| STTS22H (U8) | R19 |
| LPS22DF (U6) | R32 |
| Adapter ea DIL24 (J1) | JP5 |
| LSM6DSV16X | R33 |
3.5 Ho khaoha ha sensor
Ho hakolla sensor, o tlameha ho hakolla bese ea I²C hammoho le phepelo ea motlakase. Sheba tafole e ka tlase bakeng sa li-jumpers le marokho a solder.
Lethathamo la 3. Khokahano lipakeng tsa lisensara, li-jumpers le marokho a solder a I²C
| Sensoro | SDA | SCL |
| LIS2MDL (U7) | SB30 | SB26 |
| LSM6DSO16IS (U9) | SB38 | SB36 |
| SHT40AD1B (U10) | SB39 | SB37 |
| LIS2DUXS12 (U5) | SB22 | SB16 |
| STTS22H (U8) | SB33 | SB32 |
| LPS22DF (U6) | SB28 | SB25 |
| Adapter ea DIL24 (J1) | SB47, SB49, SB48 | SB51, SB53, SB52 |
| LSM6DSV16X | SB21 | SB18 |
3.6 Boto ea adaptara bakeng sa sokete ea DIL24
Sensor e eketsehileng e ka kopanngoa e le boto ea adapter ho J6 DIL24 socket.
Kaha ho na le likabelo tse 'maloa tse fapaneng tsa tšitiso bakeng sa lipini tsa DIL24, phini e nepahetseng e ka khethoa ho sebelisoa.
sehlooho sa J2.
Lihokelo tse amanang
Ka kopo etela ST websebaka sa marang-rang ho fumana li-sensor tse ling tse fumanehang
3.7 Lihokelo
Letlapa la 4. Arduino R3 lihokelo tsa UNO
| Sehokedi | Phae(1) | Letshwao |
| CN5 | 7 | GND |
| 9 | PC SDA | |
| 10 | PC SCL | |
| CN6 | 2 | 3.3 V |
| 4 | 3.3 V | |
| 6 | GND | |
| 7 | GND | |
| 8 | NC[FT1] | |
| CN8 | 3 | LIS2MDL DRDY |
| 4 | Tlhaloso: LIS2DUXS12 INT | |
| 5 | Tlhaloso: STTS22H INT | |
| 6 | Setšoantšo sa LSM6DS0161S INT1 | |
| CN9 | 3 | USER INT |
| 4 | SPI CLK | |
| 5 | Tlhaloso: LSM6DSV16X INT2 | |
| 6 | Tlhaloso: LSM6DSV16X INT1 | |
| 7 | Tlhaloso: LPS22DF INT1 | |
| 8 | Setšoantšo sa LSM6DS0161S INT2 |
- Lithako tse sa thathamisoang ha lia hokahanngoa.
Letlapa la 5. lihokelo tsa ST morpho
| Sehokedi | Pin(1) | Letshwao |
| CN7 | 12 | 3.3 V |
| 16 | 3.3 V | |
| 20 | GND | |
| 22 | GND | |
| 32 | LIS2MDL DRDY | |
| 34 | Tlhaloso: LIS2DUXS12 INT | |
| 36 | Tlhaloso: STTS22H INT | |
| 38 | Tlhaloso: LSM6DSO16IS INT1 | |
| CN10 | 3 | I²C SCL |
| 5 | I²C SDA | |
| 23 | Tlhaloso: LSM6DSO16IS INT2 | |
| 25 | Tlhaloso: LPS22DF INT1 | |
| 27 | Tlhaloso: LSM6DSV16X INT1 | |
| 29 | Tlhaloso: LSM6DSV16X INT2 | |
| 31 | SPI CLK | |
| 33 | USER INT |
- lithakhisa tse sa thathamisoang ha lia hokahana.
Litšoantšo tsa schematic
Bili ea thepa
Letlapa la 6. X-NUCLEO-IKS4A1 bili ea thepa
| Ntho | Bongata | Referense | Karolo / boleng | Tlhaloso | Moetsi | Nomoro ea karolo |
| 1 | 2 | C23, C25 | 220pF | Multilayer Ceramic Li-capacitors 220pF ± 5% 100V COG SMD 0402 |
TDK | C1005C0G2A221J050BA |
| 2 | 6 | C2, C4, C10, C12, C14, C20 |
10uF | CAP CER 0603 10uF 6.3V X5R 20% |
Walsin | Setšoantšo sa 0603X106M6R3CT |
| 3 | 12 | C3, C5, C6, C7, C8, C9, C11, C13, C15, C16, C17, C18, C21, C22 |
100NF | CAP CER 0603 100nF 25V X7R 10% |
MAKATSANE | MC06038104K250 CT |
| 4 | 1 | C19 | 220NF | CAP CER 0603 220nF 25V X7R 10% |
KEMET | Setšoantšo sa C0603X224K4RACTU |
| 5 | 1 | CN5 | 1 × 10 Pin e phahamisitsoe | sokete Samtec |
ESQ-110-24-TS — |
|
| 6 | 2 | CN9, CN6 | 1 × 8 Pin e phahamisitsoe sokete |
Samtec | ESQ-108-24-TS | |
| 7 | 1 | CN8 | 1 × 6 Pin e phahamisitsoe sokete |
Samtec | ESQ-106-24-TS | |
| 8 | 2 | D1, D2 | EA-882-SOD | Trans Voltage Suppressor Diode, 40W, Bidirectional, 1 Element, Silicon |
STMicroelectronics | ESDAXLC6-1BT2 |
| 9 | 1 | J1 | Sehlooho sa 4 | MAKATSANE | 2211 S-04G | |
| 10 | 1 | J2 | 16 Boemo, Bobeli - Mola, O koahetsoeng Sethala sa Terminal, sekontiri sa 2mm |
Adam Tech | 2PH2-16-UA | |
| 11 | 1 | J3 | 12 Boemo, Bobeli - Mola, O koahetsoeng Sethala sa Terminal, sekontiri sa 2mm |
Samtec | SHF-106-01-LD-SM | |
| 12 | 2 | J4, j5 | 12 Boemo, Bobeli - Mola, O koahetsoeng Sethala sa Terminal, sekontiri sa 2mm |
Adam Tech | 2PH2-12-UA | |
| 13 | 1 | J6 | Adapter DIL24 | E-TEC | 2BL1-036-G-700-01 | |
| 14 | 5 | JP1, JP2, JP5, JP6, JP7 |
Sehlooho sa 3 | MAKATSANE | 2211S-03G | |
| 15 | 2 | JP3, JP4 | Hlooho 1 × 2 lithakhisa, 2.54 limilimithara, e otlolohileng |
MAKATSANE | 2211S-02G | |
| 16 | 2 | QVAR1, QVAR2 |
Header_3pin_SMD | TCG | BG125-03-A-1-1-0440-ND | |
| 17 | 15 | R1, R2, R9, R10, R11, R12, R13, R14, R15, R23, R24, R25, R28, R29, R34 |
4k7 | RES 0603 4k7 1% 1/16W, MOHLASI |
YAGEO | RC0603FR-074K7L |
| 18 | 1 | R3 | 15k | RES 0603 12k 1% 1/16W, MOHLASI |
YAGEO | RC0603FR-1315KL |
| 19 | 1 | R4 | 12k | RES 0603 0R0 1% 1/16W |
YAGEO | RC0603FR-1312KL |
| 20 | 9 | R32, R33, R16, R17, R18, R19, R20, R21, R22 |
0R | RES 0603 2k2 1% 1/16W |
YAGEO | RC0603FR-070RL |
| 21 | 2 | R26, R27 | 2k2 | RES Thick Film, 10MΩ, 1%, 0.1W, 100ppm/°C, 0603 |
YAGEO | RC0603FR-132K2L |
| 22 | 4 | R5, R6, R7, R8 |
10M | RES 0603 0R0 1% 1/16W |
YAGEO | RC0603FR-0710ML |
| 23 | 40 | SB1, SB2, SB4, SB5, SB6, SB7, SB8, SB9, SB10, SB11, SB12, SB14, SB15, SB16, SB18, SB20, SB21, SB22, SB23, SB24, SB25, SB26, SB27, SB28, SB29, SB30, SB32, SB33, SB35, SB36, SB37, SB38, SB39, SB40, SB42, SB44, SB47, SB51, SB55, SB56 |
0R | YAGEO | RC0603FR-070RL | |
| 24 | 1 | U1 | SOT23-5L | LDO Moqtage Litaolo tsa 300mA Motsoako o tlase Lerata le tlase LDO |
STMicroelectronics | LDK130M-R |
| 25 | 2 | U2, U3 | IC MOFETOLI LIEKETSENG LEBELE 20VQFN |
Nexperia | NXS0108BQX | |
| 26 | 1 | U4 | VFLGA2.5X3X.86 14L P.5 L.475X.25 |
6-axis IMU e nang le fusion ea sensor e kentsoeng, AI, Qvar bakeng sa lisebelisoa tsa maemo a holimo |
STMicroelectronics | Lethathamo la LSM6DSV16XTR |
| 27 | 1 | U5 | LGA 2X2X0.74MAX 12 LIEKETSENG |
Ultra-low-low-power 3axis smart accelerometer e kentsoeng mochini oa ho ithuta oa mantlha le filthara ea antialiasing |
STMicroelectronics | LIS2DUXS12TR |
| 28 | 1 | U6 | HLGA 2X2X.8 10L EXP. SILIC .91SQ |
Matla a tlase le ho nepahala ho phahameng MEMS nano khatello ea maikutlo: 260-1260 hPa |
STMicroelectronics | LPS22DFTR |
| 29 | 1 | U7 | LGA 2×2 12L | Matla a tlase haholo, magnetometer ea ts'ebetso e phahameng ea 3-axis | STMicroelectronics | LIS2MDLTR |
| 30 | 1 | U8 | UDFN-6L_2X2X0P5_STM | Tlase voltage, ultralow-power, 0.5 °C ho nepahala ha mocheso kutlo |
STMicroelectronics | Tlhaloso: STTS22HTR |
| 31 | 1 | U9 | VFLGA2.5X3X.86 14L P.5 L.475X.25 |
3-axis accelerometer le 3-axis gyroscope e nang le ISPU |
STMicroelectronics | Lethathamo la LSM6DSO16ISTR |
| 32 | 1 | U10 | Digital Relative Humidity Sensora ea mocheso, ±1.8 / max 3.5 %RH, ±0.2 °C, UltraLow-Power |
Sensirion | SHT40-AD1B-R3 |
Liphetolelo tsa Kit
Lethathamo la 7. X-NUCLEO-IKS4A1 liphetolelo
| E felile hantle | Litšoantšo tsa schematic | Bili ea thepa |
| X$NUCLEO-IKS4A1A(1) | X$NUCLEO-IKS4A1A litšoantšo tsa moralo | X$NUCLEOIKS4A1A bili ea thepa |
- Khoutu ena e supa mofuta oa pele oa tlhahlobo ea X-NUCLEO-IKS4A1. Kit e na le boto e kholo ea X-NUCLEOIQS4A1 eo mofuta oa eona o khetholloang ka khoutu X$NUCLEO-IQS4A1A le boto e ka tlosoang STEVAL-MKE001A eo mofuta oa eona o khetholloang ka khoutu STEVAL$MKE001AA.
Boitsebiso ba ho lumellana le taolo
Tsebiso bakeng sa US Federal Communication Commission (FCC)
Bakeng sa tlhahlobo feela; ha FCC e sa lumelloa ho rekisoa hape
TLHOKOMELISO ea FCC - Sesebelisoa sena se etselitsoe ho lumella:
- Bahlahisi ba sehlahisoa ho lekola likarolo tsa elektroniki, potoloho, kapa software e amanang le kit ho bona hore na ba ka kenyelletsa lintho tse joalo sehlahisoa se felileng le
- Baetsi ba software ba tla ngola lits'ebetso tsa software bakeng sa tšebeliso le sehlahisoa sa ho qetela.
Sehlahisoa sena ha se sehlahisoa se felileng, 'me ha se kopane se ka se rekisoe kapa sa rekisoa ka tsela e' ngoe ntle le haeba tumello ea lisebelisoa tsa FCC e qala ho fumanoa. Ts'ebetso e ipapisitse le maemo a hore sehlahisoa sena se se ke sa baka tšitiso e kotsi ho liteishene tsa radio tse nang le laesense le hore sehlahisoa sena se amohele tšitiso e kotsi. Ntle le haeba sephutheloana se kopaneng se etselitsoe ho sebetsa tlasa karolo ea 15, karolo ea 18 kapa karolo ea 95 ea khaolo ena, mosebeletsi oa lisebelisoa o tlameha ho sebetsa tlasa bolaoli ba mong'a laesense ea FCC kapa o tlameha ho fumana tumello ea liteko tlasa karolo ea 5 ea khaolo ena ea 3.1.2. XNUMX.
Tsebiso ea Boqapi, Saense le Ntlafatso ea Moruo Canada (ISED)
Bakeng sa merero ea tlhahlobo feela. Setsi sena se hlahisa, se sebelisa, 'me se ka khantša matla a maqhubu a seea-le-moea 'me ha se e-so lekoe ho lumellana le meeli ea lisebelisoa tsa komporo ho latela melao ea Industry Canada (IC).
Tsebiso bakeng sa European Union
Sesebelisoa sena se lumellana le litlhoko tsa bohlokoa tsa Directive 2014/30/EU (EMC) le Directive 2015/863/EU (RoHS).
Tsebiso bakeng sa United Kingdom
Sesebelisoa sena se lumellana le Melao ea Tšebelisano ea Motlakase ea UK Electromagnetic 2016 (UK SI 2016 No. 1091) le Thibelo ea Tšebeliso ea Lintho Tse Ling Tse Kotsi Melaong ea Motlakase le Electronic Equipment Regulations 2012 (UK SI 2012 No. 3032).
Nalane ea ntlafatso
Lethathamo la 8. Histori ea ntlafatso ea litokomane
| Letsatsi | Phetolelo | Liphetoho |
| 11-Oct-23 | 1 | Tokollo ea pele. |
TSEBISO EA BOHLOKOA – BALA KA HLOKO
STMicroelectronics NV le li-subsidiary tsa eona ("ST") li na le tokelo ea ho etsa liphetoho, litokiso, lintlafatso, lintlafatso, le lintlafatso ho lihlahisoa tsa ST le/kapa tokomaneng ena ka nako efe kapa efe ntle le tsebiso. Bareki ba lokela ho fumana lintlha tsa morao-rao tse amanang le lihlahisoa tsa ST pele ba fana ka litaelo. Lihlahisoa tsa ST li rekisoa ho latela lipehelo le maemo a thekiso ea ST ka nako ea tumello ea taelo.
Bareki ke bona feela ba ikarabellang bakeng sa khetho, khetho, le tšebeliso ea lihlahisoa tsa ST mme ST ha e nke e le molato bakeng sa thuso ea kopo kapa moralo oa lihlahisoa tsa bareki.
Ha ho laesense, e hlalositsoeng kapa e boletsoeng, ea tokelo efe kapa efe ea thepa ea mahlale e fanoeng ke ST mona.
Ho rekisoa ha lihlahisoa tsa ST ka litokisetso tse fapaneng le tlhahisoleseding e boletsoeng mona ho tla hlakola waranti leha e le efe e fanoeng ke ST bakeng sa sehlahisoa se joalo.
ST le logo ea ST ke matšoao a khoebo a ST. Bakeng sa lintlha tse ling mabapi le matšoao a ST, sheba ho www.st.com/trademarks. Mabitso a mang kaofela a lihlahisoa kapa litšebeletso ke thepa ea beng ba tsona.
Lintlha tse tokomaneng ena li nkela sebaka le ho nkela tlhahisoleseding e neng e fanoe pele liphetolelong tsa pele tsa tokomane ena.
© 2023 STMicroelectronics – Litokelo tsohle li sirelelitsoe
UM3239 - Tšen 1
Litokomane / Lisebelisoa
 |
STMicroelectronics UM3239 Motion Mems le Boto ea Katoloso ea Sensor ea Tikoloho [pdf] Bukana ea Mosebelisi X-NUCLEO-IQS4A1, LSM6DSO16IS, LSM6DSV16X, UM3239, UM3239 Motion Mems le Boto ea Katoloso ea Sensor ea Tikoloho, Motion Mems le Boto ea Katoloso ea Sensor ea Tikoloho, Mems le Boto ea Katoloso ea Sensor ea Tikoloho, Boto ea Katoloso ea Boto ea Sensor, Boto ea Katoloso ea Sensor ea Tikoloho. |
