STMicroelectronics STEVAL-IFP044V1 Boto ea Katoloso ea Liindasteri tsa Digital
Selelekela
STEVAL-IFP044V1 ke boto ea katoloso ea tlhahiso ea dijithale tsa indasteri. E fana ka tikoloho e matla le e feto-fetohang bakeng sa tlhahlobo ea bokhoni ba ho khanna le ho hlahloba ts'ebetso ea IPS2050HQ-32 (tse peli tse phahameng tsa mahlakoreng a mabeli a bohlale a matla a matla a matla a matla a matla a matla a matla a matla) ka mochine oa tlhahiso ea digital o kopantsoeng le 5.7 A (max.) meroalo ea indasteri.
STEVAL-IFP044V1 e ka sebelisana le microcontroller ho STM32 Nucleo ka li-optocouplers tsa 5 kV tse tsamaisoang ke GPIO pins, Arduino UNO R3 (default configuration) le ST morpho (ho ikhethela, eseng ho kenngoa) li-connectors.
Boto ea katoloso e ka hokahanngoa le boto ea ntlafatso ea NUCLEO-F401RE kapa NUCLEO-G431RB.
Hape hoa khonahala ho lekola sistimi e entsoeng ke liboto tse atolositsoeng tse fihlang ho tse 'ne tsa STEVAL-IFP044V1.
Joalo ka mohlalaample, tsamaiso e nang le liboto tse 'nè tsa katoloso ea STEVAL-IFP044V1 e u lumella ho hlahloba mochine oa tlhahiso ea digital oa mechine e robeli e nang le bokhoni ba 5.7 A (max.) ka 'ngoe.
Rea qala
Fetileview
STEVAL-IFP044V1 e kenya IPS2050HQ-32 sesebelisoa sa matla a bohlale (IPS), se nang le tšireletso e feteletseng le mocheso o feteletseng bakeng sa taolo e sireletsehileng ea mojaro.
Boto e etselitsoe ho fihlela litlhoko tsa ts'ebeliso ho latela karohano ea galvanic lipakeng tsa li-interfaces tsa basebelisi le matla. Tlhokahalo ena e khotsofatsoa ke ho itšehla thajana ho sebelisoa ka li-optocouplers tse 'ne (ISO1, ISO2, ISO3 le ISO4) bakeng sa ho fetisetsa lipontšo ho sesebelisoa le lithakhisa tsa FLT bakeng sa matšoao a tlhahlobo ea maikutlo.
Setšoantšo sa STEVAL-IFP044V1
- E ipapisitse le IPS2050HQ-32 switch e nang le mahlakore a mabeli, e nang le likarolo:
- Sebaka sa ho sebetsa ho fihla ho 60 V/5.7 A
- Phallo e tlase ea matla (RON(MAX) = 50 mΩ)
- Ho bola kapele bakeng sa meroalo e inductive
- Ho khanna ka mokhoa o bohlale oa capacitive load
- Tlas'a voltage notletsoe
- Litšireletso tse ngata haholo ka kanale le mocheso o feteletseng
- QFN48L 8×6 limilimithara sephutheloana
- Letoto la ts'ebetso ea boto ea kopo: 8 ho isa ho 33 V/0 ho isa ho 5.7 A
- Molumo o atolositsoengtagsebaka sa ts'ebetso (J3 Open) ho fihla ho 60 V
- Li-LED tse tala bakeng sa boemo ba ho tima / ho tima
- Li-LED tse khubelu bakeng sa tlhahlobo ea mocha ka mong (ho jara le ho chesa haholo)
- 5 kV galvanic ho itšehla thajana
- Supply rail reverse polarity tshireletso
- E lumellana le liboto tsa nts'etsopele ea STM32 Nucleo
- E na le likhokahano tsa Arduino UNO R3
- CE e netefalitsoeng
- RoHS le China RoHS li lumellana
- FCC ha ea lumelloa ho rekisoa hape
Karolo ea dijithale
Karolo ea dijithale e amahanngoa le sebopeho sa STM32 le phano ea dijithale voltage ea le ho tsoa ho boto ea katoloso ea STEVAL-IFP044V1.
Lihokelo tse 'ne tsa Arduino UNO R3:
- lumella puisano ea boto ea katoloso le microcontroller ea boto ea ntlafatso ea STM32 Nucleo ho fihlella mehloli ea STM32 peripheral le GPIO;
- fana ka phepelo ea dijithale voltage pakeng tsa boto ea nts'etsopele ea STM32 Nucleo le boto ea katoloso ea STEVAL-IFP044V1, ka mahlakoreng ka bobeli.
Ka tloaelo, boto ea nts'etsopele ea STM32 Nucleo e fana ka boto ea katoloso ka 3v3 kapa 5v0 e hlahisoang ke USB. U ka khetha molumo o khethiloengtage holim'a boto ea katoloso ka SW3 (3v3 lipini tsa ho koala 1-2; 5v0 lithakhisa tsa ho koala 2-3).
Ntle le moo, hoa khoneha ho fana ka boto ea nts'etsopele ea STM32 Nucleo ka boto ea katoloso. Tabeng ena, phepelo ea ka ntle voltage (7-12 V) e lokela ho hokahanngoa CN2 sehokelo (eseng mounted by default) ka boto katoloso le fatše lupu lokela ho koaloa ka ntseng bo eketseha D2 ( nolofalletsa reverse polarity tshireletso) kapa ka ho koala J17 (ntle le polarity reverse).
Ho fana ka VIN voltagseporo se hlokahala ho:
- koala jumper JP5 lipakeng tsa pins 2 le 3 le jumper e bulehileng JP1 ho NUCLEO-F401RE
- jumper e bulehileng JP5 lipakeng tsa 1 le 2 le jumper e koalang JP5 lipakeng tsa 3 le 4 ho NUCLEO-G431RB
Karolo ea matla
Karolo ea matla e kenyelletsa matla a phepelo ea matlatage (CN1, pin 2 le 3 bakeng sa VCC, pin 4 bakeng sa GND), khokahanyo ea mojaro (pakeng tsa CN1 pins 1-4 le CN1 pins 5-4) le tšireletso ea electromagnetic comppatibility (EMC).
- Sehlahisoa sa 1 - LED e khubelu e nang le phoso
- Sehlahisoa sa 2 - LED e khubelu e nang le phoso
- Sehlahisoa sa 1 - LED e tala
- Sehlahisoa sa 2 - LED e tala
- IPS2050HQ-32
- Sehokelo sa ho tsoa le phepelo ea motlakase
Bakeng sa EMC:
- Setšoantšo sa SM15T39CAtage suppressor (TR1), e nolofalitsoeng ka ho koala JP3, e behiloe pakeng tsa lipina tsa VCC le GND ho sireletsa IPS2050HQ-32 khahlanong le ts'ebetso ea ho phalla tseleng ea terene ho fihlela ho ± 1kV / 2Ω coupling;
- ka mokhoa o tloaelehileng oa tlhahlobo ea ho buuoa, li-capacitor tse peli tsa lera le le leng (C1 le C2 - ha li kenyelelitsoe) li tlameha ho rekisoa libakeng tse reriloeng pele;
- Setšoantšo sa IPS2050HQ-32tages ha e hloke tšireletso e eketsehileng ea EMC mabapi le litekanyetso tsa IEC61000-4-2, IEC61000-4-3, IEC61000-4-5.
Litlhoko tsa lisebelisoa
Boto ea katoloso ea STEVAL-IFP044V1 e etselitsoe ho sebelisoa le liboto tsa ntlafatso tsa NUCLEO-F401RE kapa NUCLEO-G431RB STM32 Nucleo.
Ho sebetsa ka nepo, STEVAL-IFP044V1 e tlameha ho hokeloa holim'a lithakhisa tsa Arduino UNO R3 tse tsamaellanang le boto ea STM32 Nucleo joalo ka ha ho bonts'itsoe ka tlase.
Litlhoko tsa tsamaiso
Ho sebelisa liboto tsa nts'etsopele ea STM32 Nucleo ka boto ea katoloso ea STEVAL-IFP044V1, u hloka:
- Windows PC/laptop (Windows 7 kapa ka holimo)
- mofuta oa A ho isa ho mini-B thapo ea USB ho hokahanya boto ea STM32 Nucleo ho PC ha o sebelisa boto ea ntlafatso ea NUCLEO-F401RE
- thapo ea USB ea mofuta oa A ho ea ho micro-B ho hokela boto ea STM32 Nucleo ho PC ha u sebelisa boto ea ntlafatso ea NUCLEO-G431RB.
- X-CUBE-IPS firmware le sephutheloana sa software se kentsoeng ho PC/laptop ea hau
Ho hlophisoa ha boto
- Mohato oa 1. Hokela thapo e nyane ea USB kapa mini/USB ho komporo ea hau ho sebelisa STEVAL-IFP044V1 ka NUCLEOF401RE kapa NUCLEO-G431RB boto ea ntlafatso.
- Mohato oa 2. Khoasolla firmware (.bin kapa .hex) ho STM32 Nucleo development board microcontroller ka STM32 ST-LINK utility, STM32CubeProgrammer le ho latela tikoloho ea IDE ea hau joalo ka ha ho hlalositsoe tafoleng e ka tlase.
Letlapa la 1. Boto ea ntlafatso ea NUCLEO-F401RE e tšehetsoeng ke li-IDE - bin filesNUCLEO-F401RE IAR Keil Tlhaloso: STM32CubeIDE EWARM-OUT03_04- STM32F4xx_Nucleo.bin
MDK-ARM-OUT03_04- STM32F4xx_Nucleo.bin
STM32CubeIDE-OUT03_04- STM32F4xx_Nucleo.bin
Letlapa la 2. Boto ea ntlafatso ea NUCLEO-G431RB e tšehetsoeng ke li-IDE - bin files
NUCLEO-G431RB IAR Keil Tlhaloso: STM32CubeIDE EWARM-OUT03_04- STM32G4xx_Nucleo.bin
MDK-ARM-OUT03_04- STM32G4xx_Nucleo.bin
STM32CubeIDE-OUT03_04- STM32G4xx_Nucleo.bin
Tlhokomeliso: The binary filetse thathamisitsoeng litafoleng tse ka holimo li kenyelelitsoe ka har'a sephutheloana sa software sa X-CUBE-IPS. STEVAL-IFP044V1 e lumellana ka botlalo le X-NUCLEO-OUT04A1.
- Mohato oa 3. Hokela phepelo ea lisebelisoa tsa IPS2050HQ-32 voltage ka CN1 (sheba Karolo ea 1.1.2 Power karolo).
- Mohato oa 4. Fana ka phepelo ea dijithale voltage (sheba Karolo ea 1.1.1 Digital karolo).
- Mohato oa 5. Hokela mojaro sehokelong se hlahisoang (sheba Karolo ea 1.1.2 Karolo ea Matla).
- Mohato oa 6. Khutlisa example tatellano ka ho tobetsa konopo e ntšo leboteng la STM32 Nucleo.
- Mohato oa 7. Tobetsa konopo e putsoa ho STM32 Nucleo board ho khetha har'a ba peleampe fanoeng ka har'a sephutheloana sa kamehla sa firmware.
Litlhophiso tse ngata tsa boto
Hape hoa khoneha ho lekola mochini oa tlhahiso ea dijithale tse robeli ka ho bokella tse 'ne STEVAL-IFP044V1 ka seporo se arolelanoang kapa se ikemetseng le meroalo e ikemetseng.
Tabeng ena, mapolanka a mane a katoloso (boto 0, 1, 2, 3 joalo ka ha ho bonts'itsoe tafoleng e ka tlase) e tlameha ho hlophisoa hantle: bakeng sa boto ea 1, 2 le 3, ho hlokahala hore unsolder li-resistors tse 'ne bakeng sa boto e' ngoe le e 'ngoe ho tloha ho tse sa sebetseng. beha le solder bona khutlela maemong a alternate ho latela tafole e latelang.
Letlapa la 3. Tlhophiso ea mokoloko oa mapolanka a mane a katoloso
| Nomoro ea boto. | IN1 | IN2 | FLT1 | FLT2 |
| Papali ea 0 | R101 | R102 | R103 | R104 |
| Papali ea 1 | R131 | R132 | R133 | R134 |
| Papali ea 2 | R111 | R112 | R113 | R114 |
| Papali ea 3 | R121 | R122 | R123 | R124 |
Bohlokoa: Ha o sebelisa Boto ea 2 le Boto ea 3, li-jumper tse peli li tlameha ho koala likhokahano tsa morpho ho boto ea STM32 Nucleo:
- CN7.35-36 e koetsoe
- CN10.25-26 e koetsoe
Litšoantšo tsa schematic
Setšoantšo sa 5. STEVAL-IFP044V1 kemiso ea potoloho (1 ea 2)
Setšoantšo sa 6. STEVAL-IFP044V1 kemiso ea potoloho (2 ea 2)
Bili ea thepa
Lethathamo la 4. STEVAL-IFP044V1 bili ea thepa
| Ntho | Q.ty | Ref. | Karolo/Boleng | Tlhaloso | Moetsi | Odara khoutu |
| 1 | 1 | U1 | Tlhaloso: IPS2050HQ-32, QFN48L
8×6 limilimithara |
Dual HS IPS | ST | IPS2050HQ-32 |
| 2 | 1 | CN1 | Litsela tse 5, mola o le mong, TH 1mm, 5 A | Sehokedi | BOPHELO | 691137710005 |
| 3 | C1,C2 NA | 4.7nF, 1825, 3k V | Li-capacitors | Vishay | HV1825Y472KXHATHV | |
| 3 | 1 | TR1 | SM15T39CA, SMC | 1500 W, 33.3 V TVS ho SMC | ST | SM15T39CA |
| 4 | 1 | D1 | STPS1H100A, SMA | 100 V, 1 Sesebelisoa sa matla sa Schottky | ST | STPS1H100A |
|
5 |
10 |
J1, J2, J3,
J4, J5, J6, J7, J12, J13 J17 |
TH 2.54mm |
Litsela tse 2, mola o le mong |
BOPHELO |
61300211121 |
| 6 | J10, J11 NA | TH 2.54mm | Li-Jumpers | - | - | |
| 7 | 2 | C4, C5 | 100nF, 0805, 100 V | Li-capacitors | BOPHELO | 885012207128 |
| 8 | 1 | C6 | 2.2uF, 1206, 100 V | Capacitor | AVX | 12061C225KAT2A |
| 9 | 2 | C7, C10 | 470pF, 0603, 16 V | Li-capacitors | BOPHELO | 885012206032 |
| 10 | 2 | C8, C11 | 47nF, 0603, 16 V | Li-capacitors | BOPHELO | 885012206044 |
| 11 | 2 | C9, C12 | 470nF, 0603, 25 V | Li-capacitors | BOPHELO | 885012206075 |
| 12 | C13 NA | 100uF, TH, 100 V | Capacitor | - | - | |
| 13 | 4 | ISO1, ISO2 ISO3, ISO4 | TLP383, 11-4P1A, VCE = 80V VISO=5k V | OPTOCOUPLER | TOSHIBA BOHLOKO | TLP383 140100146000 |
| 14 | 2 | R1, R2 | 27kΩ, 0603, 0.1 W | Bahanyetsi | MAKATSANE | Setšoantšo sa MCMR06X2702FTL |
| 15 | 2 | R3, R4 | 22kΩ, 0603, 0.1 W | Bahanyetsi | VISHAY | Setšoantšo sa CRCW060322K0FKEA |
| 16 | 2 | R5, R6 | 390Ω, 0603, 0.1 W | Bahanyetsi | YAGEO | RC0603FR-07390RL |
| 17 | 2 | DG1, DG2 | 150060GS75000, 0603 | LED e tala | BOPHELO | 150060GS75000 |
| 18 | 2 | R7, R8 | 22kΩ, 0603, 0.2 W | Bahanyetsi | TE-CONN | CRGH0603J22K |
| 19 | 2 | DR1, DR2 | 150060RS75000, 0603 | LED e Khubelu | BOPHELO | 150060RS75000 |
| 20 | 2 | J8, j9 | SMD 2.54 limilimithara | Litsela tse 6, sehokelo sa mela e 2 | BOPHELO | 61030621121 |
| 21 | 4 | R9, R10, R14, R15 | 10kΩ, 0603, 0.1 W, ±1 % | Bahanyetsi | Bourns | CR0603-FX-1002ELF |
| 22 | 4 | R11, R12, R16, R17 | 0Ω, 0603, 0.1 W | Bahanyetsi | MAKATSANE | Tlhaloso: MCWR06X000 PTL |
| 23 | 2 | R13, R18 | 2.2kΩ, 0603, 0.1 W | Bahanyetsi | MAKATSANE | Setšoantšo sa MCMR06X2201FTL |
| 24 | 4 | R101, R102, R103, R104 | 100Ω, 0603, 0.1 W, ±0.5 % | Bahanyetsi | Panasonic | ERJ3BD1000V |
|
25 |
R111, R121, R131 R112, R122, R132 R113, R123, R133 R114, R124, R134 NA |
100Ω, 0603 |
Bahanyetsi |
- |
- |
| Ntho | Q.ty | Ref. | Karolo/Boleng | Tlhaloso | Moetsi | Odara khoutu |
|
26 |
5 |
SW1, SW2, SW3, SW4, SW5 |
SMD 2.54 limilimithara |
Litsela tse 3, mola o le mong |
TE-CONN |
1241150-3 |
| 27 | 1 | CN2 | TH 5mm | Litsela tse 2, mola o le mong | BOPHELO | 691137710002 |
| 28 | D2 NA | BAT48JFILM, SOD-323, 40
V,0.35 A |
Tšireletso ea VDD reverse polarity | ST | Setšoantšo sa BAT48JFILM | |
| 29 | TR2 NA | ESDA15P60-1U1M, QFN-2L | Matla a phahameng a nakoana a matlatage mohatelli | ST | ESDA15P60-1U1M | |
| 30 | 1 | CN5 | TH 2.54mm | Litsela tse 10, mola o le mong | SAMTEC 4UCON | ESQ-110-14-TS 17896 |
| 31 | 2 | CN6, CN9 | TH 2.54mm | 8 litsela, 1 mola | SAMTEC 4UCON | ESQ-108-14-TS 15782 |
| 32 | 1 | CN8 | TH 2.54mm | Litsela tse 6, mola o le mong | SAMTEC 4UCON | ESQ-106-04-TS 15781 |
| 33 | CN7, CN10 NA | TH 2.54mm | Lihokelo | SAMTEC | ESQ-119-14-TD | |
|
34 |
5 |
TP1, TP2, TP3, TP4, TP5 |
TH d = 1mm |
Ntlha ea teko |
RS |
262-2034 |
Liphetolelo tsa boto
Lethathamo la 5. Setšoantšo sa STEVAL-IFP044V1
| Mofuta oa PCB | Litšoantšo tsa schematic | Bili ea thepa |
| STEVAL$IFP044V1A (1) | Lethathamo la lintlha tsa STEVAL$IFP044V1A | Lethathamo la lintlha tsa STEVAL$IFP044V1A |
Khouto ena e supa mofuta oa pele oa boto ea tlhahlobo ea STEVAL-IFP044V1. E hatisitsoe letlapeng la PCB.
Boitsebiso ba ho lumellana le taolo
Tsebiso bakeng sa US Federal Communication Commission (FCC)
Bakeng sa tlhahlobo feela; ha FCC e sa lumelloa ho rekisoa hape
TLHOKOMELISO ea FCC - Setsi sena se etselitsoe ho lumella:
- Bahlahisi ba sehlahisoa ho lekola likarolo tsa elektroniki, potoloho, kapa software e amanang le kit ho bona hore na ba ka kenyelletsa lintho tse joalo sehlahisoa se felileng le
- Baetsi ba software ba tla ngola lits'ebetso tsa software bakeng sa tšebeliso le sehlahisoa sa ho qetela.
Sehlahisoa sena ha se sehlahisoa se felileng, 'me ha se kopane se ka se rekisoe kapa sa rekisoa ka tsela e' ngoe ntle le haeba tumello ea lisebelisoa tsa FCC e qala ho fumanoa. Ts'ebetso e ipapisitse le maemo a hore sehlahisoa sena se se ke sa baka tšitiso e kotsi ho liteishene tsa radio tse nang le laesense le hore sehlahisoa sena se amohele tšitiso e kotsi. Ntle le haeba sephutheloana se kopaneng se etselitsoe ho sebetsa tlasa karolo ea 15, karolo ea 18 kapa karolo ea 95 ea khaolo ena, mosebeletsi oa lisebelisoa o tlameha ho sebetsa tlasa bolaoli ba mong'a laesense ea FCC kapa o tlameha ho fumana tumello ea liteko tlasa karolo ea 5 ea khaolo ena ea 3.1.2. XNUMX.
Tsebiso ea Boqapi, Saense le Ntlafatso ea Moruo Canada (ISED)
Bakeng sa merero ea tlhahlobo feela. Setsi sena se hlahisa, se sebelisa, 'me se ka khantša matla a maqhubu a seea-le-moea 'me ha se e-so lekoe ho lumellana le meeli ea lisebelisoa tsa komporo ho latela melao ea Industry Canada (IC).
À des fins d'évaluation uniquement. E le hore u tsebe, sebelisa et émettre de l'énergie radiofréquence et n'a pas été testé pour sa conformité aux limites des appareils informatiques conformément aux règles d'Industrie Canada (IC).
Tsebiso bakeng sa European Union
Sesebelisoa sena se lumellana le litlhoko tsa bohlokoa tsa Directive 2014/30/EU (EMC) le Directive 2015/863/EU (RoHS).
Tsebiso bakeng sa United Kingdom Sesebediswa sena se ikamahanya le Melao ya UK Electromagnetic Compatibility Regulations 2016 (UK SI 2016 No. 1091) le Thibelo ya Tshebediso ya Dintho Tse Ding Tse Kotsi Melawanang ya Thepa ya Motlakase le ya Elektronike 2012 (UK SI 2012 No. 3032 No. XNUMX No. ).
Nalane ea ntlafatso
Lethathamo la 6. Histori ea ntlafatso ea litokomane
| Letsatsi | Khatiso | Liphetoho |
| 29-Ag-2022 | 1 | Tokollo ea pele. |
TSEBISO EA BOHLOKOA – BALA KA HLOKO
STMicroelectronics NV le li-subsidiary tsa eona ("ST") li na le tokelo ea ho etsa liphetoho, litokiso, lintlafatso, lintlafatso, le lintlafatso ho lihlahisoa tsa ST le/kapa tokomaneng ena ka nako efe kapa efe ntle le tsebiso. Bareki ba lokela ho fumana lintlha tsa morao-rao tse amanang le lihlahisoa tsa ST pele ba fana ka litaelo. Lihlahisoa tsa ST li rekisoa ho latela lipehelo le maemo a thekiso ea ST ka nako ea tumello ea taelo.
Bareki ke bona feela ba ikarabellang bakeng sa khetho, khetho, le tšebeliso ea lihlahisoa tsa ST mme ST ha e nke e le molato bakeng sa thuso ea kopo kapa moralo oa lihlahisoa tsa bareki.
Ha ho laesense, e hlalositsoeng kapa e boletsoeng, ea tokelo efe kapa efe ea thepa ea mahlale e fanoeng ke ST mona.
Ho rekisoa ha lihlahisoa tsa ST ka litokisetso tse fapaneng le tlhahisoleseding e boletsoeng mona ho tla hlakola waranti leha e le efe e fanoeng ke ST bakeng sa sehlahisoa se joalo.
ST le logo ea ST ke matšoao a khoebo a ST. Bakeng sa lintlha tse ling mabapi le matšoao a khoebo a ST, sheba ho www.st.com/trademarks. Mabitso a mang kaofela a lihlahisoa kapa litšebeletso ke thepa ea beng ba tsona.
Lintlha tse tokomaneng ena li nkela sebaka le ho nkela tlhahisoleseding e neng e fanoe pele liphetolelong tsa pele tsa tokomane ena.
© 2022 STMicroelectronics – Litokelo tsohle li sirelelitsoe
Litokomane / Lisebelisoa
 |
STMicroelectronics STEVAL-IFP044V1 Boto ea Katoloso ea Liindasteri tsa Digital [pdf] Bukana ea Mosebelisi STEVAL-IFP044V1, Boto ea Katoloso ea Sephetho sa Indasteri, STEVAL-IFP044V1 Boto ea Katoloso ea Sephetho sa Indasteri, Boto ea Katoloso ea Sephetho, Boto ea Katoloso ea Sephetho, Boto ea Katoloso, Boto. |
