ST com STEVAL-2STPD01 USB Type-C Power Delivery Adapter e Thehiloe

STEVAL-2STPD01 Kit Overview

STEVE-2STPD01 HW Overview

• Tharollo ea ho bonts'a ts'ebetso le likarolo tsa STPD01 Programmable Buck Converter, e kenyellelitsoeng mohahong oa li-adapter tse peli bakeng sa ts'ebeliso ea USB Type-C™ Power Delivery.

Likaroloana

• Sephetho sa PD: li-PDO tse 'ne tse tsitsitseng (5V@3A, 9V@3A, 15V@3A, 20V@3A)
• Matla a Output: 120 W e lekantsoeng (60W bakeng sa boema-kepe bo bong le bo bong)
• E tsamaellana le lintlha tsa morao-rao tsa mofuta oa C oa USB le tlhahiso ea Power
• Li-converter tse peli tsa STPD01 tse ka khonehang tsa Buck bakeng sa Phano ea Matla a USB, e 'ngoe le e 'ngoe e khona ho fana ka matla a fihlang ho 60 W (20 V, 3 A).
• Ts'ireletso e 'meli ea TCPP02-M18 bakeng sa lisebelisoa tsa USB Type-C le PD Source.
• Ho arolelana matla algorithm ea IP e tšehetsang ts'ebeliso ea li-port tse peli.
• Tšireletso ea OVP, UVP, OC, SC.
• RoHS e lumellana

STEVAL-2STPD01 HW Architecture

Meaho ea tharollo ea Dual Port e ka aroloa ka litsamaiso tse peli tse nyane:

• "digital" stage, e khethiloeng e le boto ea ntlafatso ea STM32 Nucleo-64 NUCLEO-G071RB e kenyang STM32G071RB;
• “matla” stage, e khetholloang e le boto ea katoloso, e laolang, e tsamaisang bocha, le ho fetolela phepelo ea phepelo ho li-blocks tse sebetsang tsa tharollo, e kenya letsoho hape ho hlahiseng matla a lebelletsoeng.tages.

Likarolo tse amehang ho BOM

1. Lihokelo tsa ST Morpho (CN300, CN301)
2. STPD01PUR Programmable Buck Converter bakeng sa Phano ea Matla a USB (U400, U600)
3. TSV991AILT seporo ho ea ho Op-Amp (U401, U501, U601, U701)
4. Tšireletso ea TCPP02-M18 ea mofuta oa C bakeng sa Mohloli (U500, U700)
5. STL11N3LLH6 N-channel 30V, 11 A StripFET H6 Power MOSFET (Q500, Q501, Q700, Q701)
6. STL9P3LLH6 P-channel -30 V, -9 A STripFET H6 Power MOSFET (Q200)
7. L7983PU50R 60V, 300mA e tsamaisanang le taolo ea ho theola fatše (U200)
8. Sehokelo sa Type-C (CN500, CN700)
9. ESDA25P35-1U1M Matla a Phahameng a Fetisisang Voltage Suppressor (D500, D700)
10. SMM4F28A-TR 400W, 28 V TVS (D200)
11. DC Power Connector (J801)
12. DC Power Jack (J800)
13. Li-LED tse bontšang (D400, D401, D600, D601)

STEVAL-2STPD01 SW Architecture

Likarolo tse kholo tsa ts'ebetso ea SW ke:

1. Tlhahiso ea lisebelisoa
   • STM32CubeG0 HAL Hardware Abstraction Layer bakeng sa STM32G0 microcontroller.
   • Lera la laebrari la Board Support Package (BSP) le nang le bakhanni ba lisebelisoa tsa STPD01 le TCPP02-M18.
2. Lisebelisoa tse bohareng
   • Laeborari ea USB PD e nang le li-block tsa ST USB-PD middleware tse kholo (Enjene ea Leano, Layer ea Protocol, Physical Layer, Taolo ea koung ea USB-C)
3. Kopo
   • Motsamaisi oa Leano la Sesebelisoa ho laola lisebelisoa tsa phano ea matla a USB sethaleng
   • Power Monitor ho beha leihlo, maemong a holimo, boemo ba libese bo fumanang voltage-current para le liketsahalo tse fihlang
   • Kabelo ea Matla, IP e khethehileng ea ho aba matla pakeng tsa likou tse peli, ho qala ka tekanyetso ea ho kenya Matla le ho nahana ka boemo ba ts'ebetso ea boema-kepe bo bong le bo bong.

Hlophisa le ho beakanya STEVAL-2STPD01

Matla a Kenang a STEVAL-2STPD01

Matla a Kena a teng

• Boto e etselitsoe ho fana ka 60W bakeng sa boema-kepe bo bong le bo bong, ka lethathamo le leholo la li-PDO tse fumanehang: 20V, 15V, 9V le 5V @ 3A.
• Ho lumella boto ho fana ka matla a phahameng a lekantsoeng (120W), bonyane matla a kenang a fumanehang e tlameha ho ba> 144W, ka matla a fokolang.tagea 21v.
• Boto e ka fanoa ka lihokelo tse peli tse fapaneng:
• DC Power Jack J800 e ka monyang boholo ba 5A.
• DC Power Connector J801 e khona ho boloka ho feta 10A.
• phepelo efe kapa efe ea motlakase ea DC e lumellang boto ho fana ka matla a fihlang ho 120W (60W boema-kepeng bo bong le bo bong), e tlameha ho hokeloa ho DC Power Connector J801.

Mokhoa oa ho theha STEVAL-2STPD01

Litaelo

• Hlakola 'me u bulele STEVAL-2STPD01: boto e se e etselitsoe uena!
• Hokela boto mohloling oa DC ka DC Power Jack (J800) kapa DC Power Connector (J801) (*).
• Taba ea pele e khubelu ea LED D201 e BONAHALA 'me, LED LD4 botong ea NUCLEO-G071RB e qala ho panya ka potlako.
• Ka mor'a li-milliseconds tse seng kae, kopo e matha ho bulela li-LED tsohle (D400, D401, D600 le D601) letlapeng la ho atolosa, 'me LED LD4 boto ea NUCLEO-G071RB e qala ho panya butle.
• Haeba phepelo ea motlakase e sa reeloa hore ke 24V, 6A (ke hore boleng ba kamehla bo bolokiloeng ho STM32G071RB Flash), Input Power Setting (Vol).tage le Current) li tlameha ho ts'oaroa maemong a litlhophiso tsa ts'ebeliso (sheba selaete se latelang).
• Qetellong, boto e se e loketse ho hokahana le sethala se le seng kapa tse peli tsa Sink. (*): phepelo ea motlakase ea 24V,6A DC, sesebelisoa sa universal AC 110-240V (e bitsoang Arotelicht, mohlala oa CJ-2460) e sebelisitsoe ho hlahisa ho fihla ho 60W koung ka 'ngoe.

Mokhoa oa ho Hlophisa Matla a Kenang ho STEVAL-2STPD01 (1/2)

Litaelo
Ts'ebetso ena e lumella ho beha data ea Input Power e fapaneng le boleng ba Default (24V, 6A), hore e tsamaellane le litlhaloso tsa phepelo ea motlakase:

• Khoasolla le ho kenya STM32CubeMonitor-UCPD ho tsoa sebakeng sa ST.
• Hokela phepelo ea motlakase ho e 'ngoe ea lihokelo tsa motlakase tsa STEVAL-2STPD01 tse peli (J800 kapa J801)
• Hokela sehokelo sa NUCLEO-G071RB USB_STLINK CN2 (ea STEVAL-2STPD01), ho PC ka thapo e nyane ea USB.
• Bula lenaneo la STM32CubeMonitor-UCPD

Mokhoa oa ho Hlophisa Matla a Kenang ho STEVAL-2STPD01 (2/2)

Litaelo

• Ho seta Moqtage le Current e lekane ho ngola lebokoseng la mongolo o sa lefelloeng: V=XX[.X] C=YY[.Y] example: V=22.5 C=5.0

Mokhoa oa ho tsamaisa demo ka STEVAL-2STPD01

• Hokela li-platform tse peli tsa USBPD Sink (joalo ka li-smartphones tsa USBPD) likoung tse peli ka ho sebelisa likhoele tse peli tsa Type-C ho ea ho Type-C,
• Bakeng sa kou ka 'ngoe, STEVAL-2STPD01 e fana ka PDO e kopiloeng ke Sink e khomaretsoeng.
• Ha u sebelisa matla a mangata, STEVAL-2STPD01 e ka fana ka ho fihla ho 60W bakeng sa kou ka 'ngoe.

Mokhoa oa ho hlophisa bocha STEVAL-2STPD01

• Netefatsa hore jumper JP2 ho NUCLEO-G071RB (ea STEVAL-2STPD01), e lekana le lithakhisa tsa lihlooho tse 5-6, 'me J200 ho boto ea ho atolosa e kentsoe.
• U sebelisa thapo ea USB e nyenyane-B, hokela boto ka sehokelo sa USB_STLINK CN2 ho laptop moo mokhanni oa STLINKV2 a kentsoeng pele.
• Fana ka boto ho sebelisa phepelo ea motlakase e kantle
• Lenaneo la boto:
• Ka ho hula le ho lahla binary ea kopo e ncha ho tloha bukeng ea foldara ea morero ho ea ho setšoantšo sa NUCLEO Mass Storage ho sefate sa kopo ea laptop OS.
• Ka ho sebelisa e 'ngoe ea li-IDE tse fumanehang (STMicroelectronics STM32CubeIDE, IAR EWARM kapa Keil μVision / MDK-ARM).

Mokhoa oa ho lokisa bothata ka STM32CubeIDE

Sephutheloana sa FW se lumella tšebeliso ea 3 IDE:

• Setšoantšo sa STMicroelectronics STM32CubeIDE
• IAR EWARM
• Keil μVision / MDK-ARM
• STM32CubeIDE ke sethala sa nts'etsopele sa C/C++ se tsoetseng pele se tsoang ho STMicroelectronics se nang le likarolo tse ngata tsa bohlokoa.
• Bula morero, sheba fensetere ea STM32CubeIDE 'me u bule .project e fumanehang file. Tsela ke: $/Firmware/Projects/STEVAL-2STPD01/STM32CubeIDE
• Mosebelisi a ka lokisa / a fetola khoutu a sebelisa likarolo tsa IDE

Ho beha leihlo le ho rekota data ka STEVAL-2STPD01

Mokhoa oa ho hlahloba kapele STEVAL-2STPD01 (1/2)

• STM32G071B-DISCO e ka sebelisana habonolo le STEVAL-2STPD01.
• Ts'ebetso ea mantlha e ka etsoa:
  • Profile likopo
  • Laola Melaetsa
• Mosebelisi a ka lekola maemo a ts'ebetso ea libese ka nako ea nnete, a e hokahanya le boema-kepe bo le bong kapa ka bobeli.
• STM32G071B-DISCO le eona e ka sebelisoa:
  • joalo ka mofenyi, ho beha leihlo Sink e fapaneng
  • ka STM32CubeMonitor-UCPD ho etsa liteko tse tsoetseng pele

Mokhoa oa ho hlahloba kapele STEVAL-2STPD01 (2/2)

• Kamora ho hokela STM32G071B-DISCO ho STEVAL-2STPD01, ponts'o e bonts'a litšobotsi le likarolo tsa boto ka ho tobetsa "joystick" e putsoa (ka ho le letona):
• Pontšo e bonts'a Mohloli oa USB-PD o "Attached"
• Pontšo e bonts'a mofuta oa PD e amohetsoeng (PD3.0)
• Pontšo e bonts'a palo ea PDO e amanang le boema-kepe bo khomaretsoeng, le matla a mangata a fumanehang
• Pontšo e bontša PDO e khethiloeng (e fanoeng ke Mohloli) ka mor'a lipuisano
• Pontšo e bontša lenane la li-PDO tseo boto e ka fanang ka tsona boema-kepeng bo hokahaneng.

Tlhahisoleseling e 'Ngoe

Litokomane Tse Teng

• Lisebelisoa tsa STEVAL-2STPD01
• STEVAL-2STPD01 webleqephe
• Lethathamo la lintlha tsa DB4525 STEVAL-2STPD01
• UM2880: STEVAL-2STPD01 Hardware User Manual
• STSW-2STPD01 webleqephe
• Lethathamo la lintlha tsa DB4512 STSW-2STPD01
• UM2882: STSW-2STPD01 Software User Manual

Lisebelisoa tse ka Sehloohong tsa Lihlahisoa

• STPD01 webleqephe
• TCPP02-M18 webleqephe

Lisebelisoa tsa USB-PD

• UM2552: Ho laola lits'ebetso tsa phepelo ea matla a USB ka li-microcontroller tsa STM32
• AN5225: Phatlalatso ea Matla ea USB Type-C™ e sebelisang li-MTM32xx Series MCUs le STM32xxx Series MPUs
• TA0357: Ho fetaview ea USB Type-C le Power Delivery Technologies
• DB3747: STM32CubeMonitor-UCPD sesebelisoa sa software bakeng sa taolo ea boema-kepe ba USB Type-C™ Power Delivery

Lisebelisoa tsa lisebelisoa Lisebelisoa

• DB3871: STM32CubeIDEIntegrated Development Environment bakeng sa STM32
• DB3737: ST-LINK-V3MINImini debugger/programmer bakeng sa STM32

Setšoantšo sa STM32G071

• DB3726: STM32G071B-DISCOSTM32G0 Discovery kit bakeng sa USB Type-C™ le Power Delivery

Litokomane / Lisebelisoa

ST com STEVAL-2STPD01 USB Type-C Power Delivery Adapter e Thehiloe [pdf] Bukana ea Mosebelisi STEVAL-2STPD01, Adapter ea Mofuta oa C ea Phalliso ea Motlakase ea USB e Thehiloe, E Thehiloe ka Motlakase oa Boema-fofane, o Thehiloe ka Motlakase, STEVAL-2STPD01, E Thehiloe

Litšupiso

• Bukana ea Mosebelisi