www.solidstatelogic.com
HLOKOMELA KHANANE
Bukana ea Mosebelisi
HLOKOMELA KHANANE
SSL Origin Pure Drive Quad
Etela SSL ho:
www.solidstatelogic.com
© Mantsoe a Tiileng a Naha
Litokelo tsohle li sirelelitsoe tlas'a Tumellano ea Copyright ea Machaba le ea Pan-American.
SSL® le Solid State Logic ® ke matshwao a kgwebo a ngodisitsweng a Solid State Logic.
SuperAnalogue™, VHD™, PureDrive™ le matšoao a khoebo a PURE DRIVE QUAD™ a Solid State Logic.
Mabitso a mang kaofela a lihlahisoa le matšoao a khoebo ke thepa ea beng ba tsona 'me rea elelloa.
Ha ho karolo ea khatiso ena e lokelang ho hatisoa ka mokhoa leha e le ofe kapa ka mokhoa ofe kapa ofe, ebang ke oa mochine kapa oa elektroniki, ntle le tumello e ngotsoeng ea Solid State Logic, Begbroke, OX5 1RU, England.
Ha lipatlisiso le nts'etsopele e le ts'ebetso e tsoelang pele, Solid State Logic e na le tokelo ea ho fetola likarolo le litlhaloso tse hlalositsoeng mona ntle le tsebiso kapa tlamo.
Solid State Logic e ke ke ea jara boikarabello bakeng sa tahlehelo kapa tšenyo e hlahang ka kotloloho kapa ka kotloloho ho tsoa phoso efe kapa efe kapa phumano bukaneng ena.
KA KOPO BALA DITAELO TSOHLE, LEFA TLHOKOMELISO E KHETHEHILENG HO TEMOSO EA BOPHELO.
E&OE
Phetolelo ea 1.0 - Mphalane 2023
Phatlalatso ea Pele
Fetileview
Selelekela
PURE DRIVE QUAD e nka PureDrive™ mic preamps ho tsoa ho khomphutha ea SSL ORIGIN mme e li fana ka sesebelisoa sa rackmount sa 4 channel 2U, se nang le phetoho e tsoetseng pele le khokahanyo e bonolo ea dijithale.
Litlolo tse 3, 1 Mic Pre
E 'ngoe le e' ngoe ea tse 4 peleamps e fana ka khetho ea mekhoa e meraro: Hloekileng, Classic Drive le Asymmetric Drive. Ho hloeka ke lerata le holimo, le tlase haholoamp e kgonang ho qapa mohlodi wa modumo ka ho hlaka le ka botlalo. Classic Drive e hlahisa li-harmonic tse khahlisang
ho sotha ho ntlafatsa lets'oao la ho kenya, ho sebelisa li-harmonics tse sa tloaelehang; mosaeno o tšoanang oa molumo o fumanehang ho ORIGIN console. Asymmetric Drive e fana ka khetho e ncha ea mebala, e etsang hore litaba tse lumellanang le tsona li hlahelle le ho fana ka botenya bo hlakileng haholoanyane, 'mala le ho nolofala ha nako ea nakoana.
Analogue Obsession
PURE DRIVE QUAD e tsoela pele ho tsitlella maikutlo a SSL bakeng sa moralo o tsoelang pele oa potoloho ea analogue e nang le ts'ebetso e phahameng ea mic preamps, e bile teng ho tsoa ho theknoloji e tsebahalang ea SSL ea VHD™ (Variable Harmonic Drive)*. Ho phaella moo, PURE DRIVE QUAD e na le liphello tse leka-lekaneng tsa analogue / kenya lisebelisoa bakeng sa ts'ebetso ea ka ntle, hammoho le li-returns tse phahameng tsa hlooho ea hlooho / lisebelisoa tsa ADC tse nang le +24 dBu A / D line-up level. Ha ho lisebelisoa tsa elektro-mechanical tse kang potentiometers, li-switch tsa mochini kapa li-relay tse sebelisoang tseleng ea mats'oao a bohlokoa a eketsang bophelo bo bolelele ba sehlahisoa mme se fella ka ho bapisa maemo a matle ho liteishene tsohle. Tšebeliso ea li-circuits tsa analog tse laoloang ke dijithale, hammoho le lipitsa tse hatelitsoeng le li-switches tsa elektroniki li nolofatsa mohopolo le ho nepahala ha litlhophiso.
Khokahano e Pharalletseng
PURE DRIVE QUAD e fana ka khokahanyo e pharaletseng, e bulang lefatše la menyetla; Hore na o ntse o latella sehlopha se studio sa ho rekota sa maemo a lefats'e, o batla ho holisa sethala sa hau sa lapeng kapa o ntse o etela, PURE DRIVE e u koahetse ka likhetho tse ngata tse lumellanang hantle le litlhoko tsa hau. E ka boela ea sebelisoa ho eketsa mofuthu oa analogue likutung ka ho tsamaisa lithupa tsa DAW ka har'a eona, ka ho sebelisa lisebelisoa tsa mela. Ntle le moo, sehokelo se kopaneng sa audio sa USB se u lumella ho rekota ka kotloloho ho DAW ea hau, ka ho fetolela 32-bit/192 kHz. Kapa, sebelisa liphetho tsa AES le ADAT ho hokela sehokelo sa hau sa audio se teng. Liphetho tsa AES le ADAT le tsona li ka rereloa ka bonngoe hore li feptjoe ho tsoa ho sehokelo sa audio sa USB se ka board (joalo ka liphetho tse tsoang ho DAW ea hau). Ho potoloha lehlakore la lintho tsa dijithale, ho na le kenyeletso ea oache ea lentsoe e itlhophisang le tlhahiso bakeng sa oache e matla ea dijithale.
VHD™ (Variable Harmonic Drive) e ile ea hlahisoa ka har'a SuperAnalogue™ Duality-format console e kholo ka 2006, e nang le potoloho e ncha e thehiloeng ho FET e fanang ka mefuta e mengata ea khetho ea mebala ho tloha ho 'valve warmth' ho ea 'transistor grit'.
Likaroloana
- 4 ea ts'ebetso e phahameng ea PureDrive™ mic preamps.
- +48V phantom matla, polarity invert le filthara ea boraro ea hi-pass e fielang ho fihla ho 3 Hz.
- Taolo ea Phahamiso e hatetsoeng ho fihla ho +65 dB Gain.
- Taolo ea 31-step Trim, e nang le li-increments tse nepahetseng tsa 1 dB.
- Mekhoa e 3 bakeng sa e 'ngoe le e 'ngoe ea peleamp - E hloekile, ea khale Drive le Asymmetric Drive.
- Phetoho ea ho Kena ka Mic/Line - Mic ka XLR le Line ka khetho ea TRS Jack kapa khokahanyo e inehetseng ea D-Sub.
- Likarolo tse 4 tse ka pele tsa Hi-Z/DI Instrument tse nang le boithuto bo ikemetseng.
- 4 mic peleamp likhetho tsa ho thibela ho kenya - 12 kΩ, 1.2kΩ, 600Ω le 400Ω.
- Liphetho tse leka-lekaneng tsa analogue/kenya tse romelloang bakeng sa ts'ebetso ea kantle.
- +24 dBu professional line level insert returns/ADC inputs.
- Khokahano ea analogue ho dijithale ka ADAT, AES le USB.
- Bokhoni ba ho chencha likhokahano tsa ADAT le AES ho fumana molumo ho tsoa ho liphetho tsa DAW (USB) sebakeng sa converter ea A/D.
- Cascade 2 PURE DRIVE QUAD units ka tsela e bonolo ea ADAT LINK IN mabapi.
- Sebopeho sa audio sa USB se fanang ka 12 in / 12 out @44.1/48 kHz (4 analogue + 8 ADAT inputs (ka Link in) / 4 AES + 8 ADAT outputs).
- Lipitsa tse otlolohileng le lisebelisoa tsa elektroniki tsa analogue tse laoloang ke dijithale bakeng sa ho nepahala, ho bapisa stereo le ho hopola habonolo.
- Ho fihla ho 192 kHz le phetoho ea 32-bit, maemo a setsebi a I/O (+24 dBu = 0 dBFS).
- Mokhoa o ka Khethehang oa ho robala ka ho iketsa.
- Ho tsamaisa Wordclock ka ho iketsa In and Out.
Ho kenya
Ho phutha
Sehlopha se phuthetsoe ka hloko 'me ka har'a lebokose u tla fumana lintho tse latelang.
➤ KAROLO E HLOEKILENG E KHANANG
➤ Khoele ea motlakase ea IEC bakeng sa naha ea heno
➤ Leqephe la Tšireletseho
Kamehla ke mohopolo o motle ho boloka lebokose la mantlha le sephutheloana, feela haeba u hloka ho romella unit bakeng sa ts'ebeletso.
Ho phahamisa Rack, Mocheso le Moea o Fellang
PURE DRIVE QUAD ke karolo ea 2U, 19” ea rackmount e etselitsoeng ho lula setulong sa deske ea moetsi kapa tse ling tse tšoanang. Ho khothalletsoa hore sebaka sa moea se siiloe ka holimo le ka tlase ho yuniti e le hore mocheso ofe kapa ofe o hlahisoang ke PURE DRIVE QUAD o ka khona ka tlhaho.
qhalanya. Mahlakore a chassis ea yuniti a na le likheo tse sa lokelang ho thibeloa kapa ho koaheloa. Lumella yuniti hore e phomole pele e tšoara.
Litlhokomeliso tsa Polokeho
Ka kopo bala lintlha tsa tsebiso ea polokeho tse kenyellelitsoeng Leqepheng la Tšireletseho ka har'a lebokose pele u sebelisa PURE DRIVE QUAD. Tlhahisoleseding ena e fumaneha hape karolong ya Dihlomathiso tsa Bukana ena ya Mosebedisi.
Hardware Overview
Leqephe lena le fana ka tlhalosoview ea PURE DRIVE QUAD hardware. Karolo ea lithupelo e akaretsa taolo e 'ngoe le e 'ngoe ka botlalo.
Phanele e ka pele
Panele e ka morao
Likhokahano Ho fetaview
1. – LIMICROFONI TSE HOKANG HO MIC/LINE INPUTS
Hokela li-microphone tse fihlang ho tse 'ne u sebelisa likhoele tsa XLR ho li-sockets tsa Combo XLR tse ka morao 'me u khethe ho tsoa likhethong tse' nè tsa impedance ho lumellana hantle le ho kenya maekrofono ka 'ngoe. Kapa u hokahane le mehloli ea li-line-level ka li-jack tse bohareng ba li-sockets.
2 & 3 - AUDIO INTERFACE & TS'EPISO TSA KA NTLE E HOKANE LE TSOANG/KENYA DITHUSO
Rekota liphetho tsa analogue tsa PURE DRIVE ho likenyelletso tsa boemo ba mohala tsa sebopeho sa hau sa molumo. Ntle le moo, nka liphetho tsa analogue 'me u li romelle lisebelisoa tsa ts'ebetso tsa kantle joalo ka li-compressor tsa kantle.
4 – 2ND PURE DRIVE QUAD UNIT ADAT OUT Connected to ADAT LINK IN
Hokela ADAT OUT ea PURE DRIVE QUAD ea bobeli 'me u e hokele ho ADAT LINK ea yuniti ea hau ea pele. Sena se u fa mokhoa o bonolo oa ho romella liteishene tse 8 tsa audio ho feta 1 x ADAT optical cable ka ADAT OUT.
5 – SSL 12 ADAT IN Connect to ADAT OUT
Hokela PURE DRIVE ka dijithale ho sehokelo sa audio se nang le kenyeletso ea ADAT, joalo ka SSL 12 ho rekota u sebelisa converter ea A/D e ka board.
6 – MAC/WINDOWS COMPUTER E HOKELETSOE HO USB
Hokela thapo ya USB ho nka advantage ea sehokelo sa molumo se hahelletsoeng ka hare sa PURE DRIVE, se u lumellang ho rekota ka kotloloho ho DAW ea hau u sebelisa converter ea A/D e leboteng.
7 – SESEBETSI SA HO TLOHA MASTER SE HOKANETSOENG LE WORDLCOCK IN
Sebelisa likhokahano tsa BNC ho hokela PURE DRIVE e le karolo ea sistimi ea hau ea dijithale.
8 - AES / EBU DEVICE CONNECTED AES / EBU OUT
Sebelisa liphetho tsa AES/EBU ho hokela habonolo lisebelisoa tsa kantle tse amohelang likenyelletso tsa AES/EBU, joalo ka litsamaiso tsa kabo le li-converter tsa kantle.
9 & 10 – TŠEBELETSO EA KA NTLE LE LISEBETSI TSA LINE-LEVEL TSE KHOPOTSOANG HO KENYA PUSO LE HO HLAHALA LINE.
Khutlisetsa tlhahiso ho tsoa ho li-processor tsa analogue tsa kantle (Kenya Returns ho likhokahanyo 1-4). Hokela tlhahiso ea lisebelisoa tse inehetseng tsa linelevel (Litlhahiso tsa Line ho likhokahanyo 5-8).
Thuto
Matla On
Matla ho yuniti ka ho suthisa karolo e ka morao ea rocker-swicha hore e be boemong bo teng. Tatelano ea ho qala e tla sebetsa, e phethe ka likonopo tsa +48V tse panyang ka metsotsoana e seng mekae ha yuniti e khutlela boemong ba eona ba pele.
Front Panel Controls
QUAD e na le likanale tse 4 tsa preamps, ka sete e ts'oanang ea taolo bakeng sa e 'ngoe le e 'ngoe.
HLOMELA
Taolo e hatetsoeng ea boemo ba 11 e fana ka +5 ho +65 dB ea phaello bakeng sa mehloli ea maekrofono (ka mehato e 6 dB) le 0 ho +30 dB ea phaello bakeng sa mehloli ea Line (ka mehato ea 3 dB). Ka mokhoa oa Hi-Z, sebaka sa phaello ke +11 dB ho + 41 dB ka mehato e 3 dB.
TLHOKOMELA
Taolo ea mehato ea 31 e fana ka phaello ea ± 15 dB ho 1 dB increments. Ena ke potoloho e fapaneng ea phaello, beha GAIN ea mantlha.
Keletso e kaholimo - fetisa lets'oao ka taolo ea GAIN ebe u fokotsa ho fihla boemong bo loketseng u sebelisa TRIM, e le hore u se ke ua jarisa lisebelisoa ho theosa le pele.amp kapa converter ea analogue ho ea ho dijithale.
HPF (Sefe e Phahameng)
Boemo ba 31 bo hatelletse tatellano ea 3rd / 18 dB ka taolo ea filthara e phahameng ea octave ho fihla ho 300 Hz. Mohato o mong le o mong ke 10 Hz. Fetola ka ho feletseng khahlanong le oache ho tlosa sefe eo HO TSOA ho potoloho.
KENYA LED
Mabone a matala ho bonts'a kgutliso e kentsweng e ntse e sebetsa. Ho nolofalletsa/ho thibela ho khutlisa ho kenya, tobetsa taolo ea GAIN. Li-insert ke mokhoa o motle oa ho kenyelletsa ts'ebetso ea kantle (joalo ka EQ kapa compressor) tseleng ea matšoao ka pele ho analogue to digital converter (ADC). Ntle le moo, o ka sebelisa mokhoa oa ho khutlisa e le mokhoa oa ho feta oa peleamp stage, e ka ba molemo ha o sebelisa lets'oao le tsoang kantle ho preamps kapa neng kapa neng ha ho ea pele, ho hlokahala phetoho e hlakileng ea analogue-to-digital.
Lintlha tse Molemo: Lichelete tse kentsoeng ke likanale 1-4 tsa sehokelo sa D-Sub se ka morao.
POLARITY (Ø LED)
Mabone a matala ho bontša polarity e fetotsoe. Ho nolofalletsa/ho tima polarity flip, sututsa taolo ea TRIM. Ha o sebetsana le lisebelisoa tsa multi-mic'd joalo ka meropa, ho hlakoloa ha mekhahlelo ho ka etsahala ka lebaka la li-microphone tse amohelang maqhubu a molumo ka linako tse fapaneng.
Ho fetola polarity (kapa mohato joalo ka ha ho boleloa hangata) likanaleng tse itseng ho ka thusa ho rarolla ho hlakoloa hona.
Keletso e ka Holimo - Ke tloaelo e tloaelehileng ho phetla maekerofounu e kaholimo kapa e tlase ho netefatsa molumo o 'nonang'.
+48V
Mabone a khubelu ha a laetsoe. E fana ka matla a phantom a +48V, a hlokahalang bakeng sa maekrofono a itseng a condenser le ribone e sebetsang. Li-microphone tsa Dynamic kapa Passive Ribbon ha li hloke matla a phantom hore li sebetse 'me maemong a mang li ka baka tšenyo ho microphone.
Haeba u belaela, etsa bonnete ba hore +48V e koetsoe pele u hokela maekerofounu efe kapa efe. Ha o kenya letsoho / o sa kopanele +48V, konopo e tla panya ka metsotsoana e 4 ho bontša hore molumo o ntse o khutsisoa ka nakoana ho qoba ho tobetsa / pops ho sa batleheng.
MOKHOA
Mabone a bosoeu bo khanyang ha a sebetsa. Ho kenya konopo ea LINE ho fetola mokhoa oa ho kenya mohala, o hlahisang letšoao ho tsoa ho jack ea TRS e ka morao kapa sehokelo sa D-Sub se inehetseng. Lihokelo li entsoe ka thata ka ho bapa ka hona ho khothaletsoa ho sebelisa e le 'ngoe feela ka nako. Ka mokhoa oa LINE, likonopo tsa + 48V le ZΩ lia holofala 'me tšitiso e tsitsitse ho 22kΩ.
ZΩ
Ho fetola impedance ho u fa monyetla oa ho kenya li-vin tse ling ka nepotagli-microphone, kapa esita le ho fetola tonality ea lets'oao la ho kenya, ho fana ka taolo e eketsehileng ea boqapi ha u rekota. Tobetsa konopo ea ZΩ ho potoloha likhethong tsa ho kenya letsoho. Tobetsa 'me u hatelle ZΩ ho khutlela morao ka likhetho.
Botala = 12kΩ Bosoeu bo Lerootho = 1.2kΩ Amber = 600Ω Khubelu = 400Ω
Ka kakaretso, bakeng sa condenser le microphone e sebetsang e fetolang ho thibela microphone e ke ke ea etsa phapang ho molumo, moo ho tlohang peleamps set to feme ea kamehla Green (12kΩ) ea khothaletsoa. Bakeng sa li-microphone le li-microphone tse matla, impedance e ama molumo oa tlhaho oa microphone ka bomong, ka hona e ka sebelisoa e le sesebelisoa se matla sa ho bōpa molumo, hoo e batlang e le EQ. Sena se sebetsa ho latela molao-motheo oa ho thibela tlhahiso ea microphone e le ts'ebetso ea maqhubu a sa fetoheng kamehla.
- Ho khetha tšitiso e phahameng ea ho kenya letsoho ho tla fana ka ho kheloha ho fokolang ho tsoa ho karabelo ea tlhaho ea maekrofono, e leng se tla fella ka karabelo e leka-lekaneng le ea molumo oa tlhaho. Molao o akaretsang oa monoana ke hore peleamp e tlameha ho ba le tšitiso ea ho kenya letsoho bonyane makhetlo a leshome ho feta sephetho sa maekrofono.
- Tšitiso e tlase ea ho kenya letsoho e tla fana ka karabelo e matla ho tsoa ho maekrofono, e ntlafatsa molumo le ho saena ha maekrofono ka mong. Maqhubu ao ho ona tšitiso ea maekrofono e leng holimo ho feta karolelano a tla fokotsoa, athe maqhubu ao ho ona ho hlahisoang ha maekrofono ho tlase a tla matlafatsoa.
- Ho fetoha ho tloha boemong bo phahameng ba ho kenya letsoho ho ea ho boemo bo tlaase ba impedance ho tla fella ka ho theoha ho fokolang ha boemo. Sena se tloaelehile 'me ke phello ea karo-karolelano e kholo pakeng tsa impedance ea microphone le ea peleamp's input impedance.
KHANYA [MOFUTA]
E fetoha lipakeng tsa li-microphone tse 3 tse fapaneng peleamp mekhoa: Hloekileng, Classic Drive le Asymmetric Drive.
Hloekileng (backlit) - linear, lerata le tlase haholo le ho sotha peleamp e kgonang ho phethahala ampho hodisa mohloli wa modumo ka ho hlaka le ka botlalo.
Classic Drive (amber) - e hlahisa ho sotha ha harmonic ho ntlafatsa lets'oao la ho kenya, ho sebelisoa li-harmonics tse sa tloaelehang; molumo o tšoanang oa koloi o fumanoeng ho ORIGIN console. Ho sotha ha harmonic ho itšetlehile ka boemo / phaello.
Asymmetric Drive (e tala) - mokhoa o mong oa mokhoa oa Classic Drive, moo litaba tsa harmonic li fetohang matla ho feta li-harmonics tse sa tloaelehang. E fella ka botenya bo hlakileng haholoanyane le ho nolofala ha nakoana. Ho sotha ha harmonic ho itšetlehile ka boemo / phaello. Ho kenya Asymmetric drive mode tobetsa 'me u tšoare konopo ea DRIVE motsotsoana kapa ho feta.
Keletso e kaholimo - Konopo ea DRIVE e benya bofubelu ho bonts'a hore u ntse u pata ntlha ea mantlhaamp kapa trim stage. Theola GAIN (kapa TRIM) ho lokisa.
Classic Drive vs Asymmetric Drive
Kerafo e ka tlase e bonts'a phapang lipakeng tsa li-harmonics tse hlahisoang ke Classic Drive vs Asymmetric Drive ka chelete e ngata ea 29 dB.
- Li-harmonics tse putsoa li tsoa ho tlhophiso ea Classic Drive, athe li-harmonics tse khubelu li tsoa ho Asymmetric Drive mode.
- Hlokomela hore 2nd harmonic e hlahella haholo ho Asymmetric Drive.
Hi-Z/DI – Dikenyo tsa seletsa
E 'ngoe le e 'ngoe ea likanale tse kentsoeng e na le 1MΩ Hi-Z/DI e sa leka-lekanang ea Instrument bakeng sa mehloli e hokelang joalo ka likatara le likonopo.
Lintho tsena tse kentsoeng li na le mokhoa oa ho iponahatsa, ho bolelang hore ho hokela jack ka har'a sokete ho tla etsa hore Hi-Z/DI Input e be mohloli o khethiloeng (ho e-na le Mic kapa Line). Likonopo tsa +48V, LINE le ZΩ li koetsoe empa u ntse u ka sebelisa mekhoa ea DRIVE ho mebala lets'oao (kapa che) kamoo u ratang.
Matla, Digital Clock Setup & Metering
Metara
14-segment LED metering e bonts'a boemo ba lets'oao ho dBu ho analogue to digital converter s.tage. Karolo ea "peak hold" le "ballistics" ea ho lokolla e ka fetoloa hore e lumellane le khetho ea hau. Ka kopo sheba karolo ea Litlhophiso ea bukana ea mosebelisi bakeng sa tlhaiso-leseling e batsi.
MOKHOA OA HO MAMELA (ROBA)
STANDBY MODE e fana ka mokhoa o bonolo oa ho beha yuniti ho robala ho tsoa phanele e ka pele. Ho kenya mokhoa ona, tobetsa o hatelle konopo motsotsoana. Likonopo tsohle tse ka pele le li-LED li tla tima, ntle le konopo ea STANDBY MODE ka boeona, e tla phunya butle. STANDBY MODE e beha yuniti boemong ba matla a tlase, e koala sekhechana sa molumo ho fihlela yuniti e tsosoa borokong. Tobetsa konopo hape ho tsosa yuniti borokong. STANDBY MODE le eona e ka hlophisoa hore e tle ka bo eona ka mor'a nako e itseng ea ho se sebetse. Ka kopo, sheba karolo ea Litlhophiso tsa buka ea mosebelisi bakeng sa tlhaiso-leseling e batsi.
RATE
Tobetsa konopo ea RATE ho fetola sample sekhahla sa analogue e hahelletsoeng ho converter ea dijithale.
Tobetsa 'me u tšoare konopo ea RATE ho khutlela morao ka sample rate dikgetho.
Ea hona joale samplebelo le bonts'oa ka ho khantša ha 44.1 le 48 (kHz), hammoho le x2 le x4 matšoao sebakeng sa boemo.
| PELE MOTS'EOA | SAMPLE RATE (kHz) |
| 44.1 | 44.1 |
| 48 | 48 |
| 44.1 + x2 | 88.2 |
| 48 + x2 | 96 |
| 44.1 + x4 | 176.4 |
| 48 + x4 | 192 |
TŠEBELE
Tobetsa konopo ea CLK ho fetola mohloli oa oache - khetha ho INT (ka hare), W / C (wordclock) kapa ADAT.
Tobetsa o hatelle konopo ea CLK ho khutlela morao ka likhetho tsa mohloli oa oache
Mohloli oa oache oa hona joale o bontšoa ke ho khantša ha matšoao a INT, W / C le ADAT sebakeng sa boemo.
Ha o ts'oara ho tsoa ho oache ea mantsoe kapa ho kenya ADAT, phanele e ka pele e sampPontšo ea sekhahla e tla khanya ho u tsebisa hore mohloli ha o teng kapa ka sekhahla se ka sebelisoang.
USB
E khantša botala bo tiileng ho bontša hore yuniti e hokahane ka katleho le komporo ea moamoheli ka USB. Ka kopo elelloa hore ha yuniti e hokahantsoe ka USB, li-button tsa RATE le CLK tse ka pele ha li sebetse. Sebelisa komporo ea hau e amohelang ho etsa liphetoho ho Sample Rate le Mohloli oa Clock. Bakeng sa tlhaiso-leseling e batsi mabapi le sehokelo sa mamelwang sa USB se hahelletsweng kahare, sheba karolo ya USB audio interface ho bukana ena ya mosebedisi.
Lihokelo tsa Panel tse ka morao
Maikutlo a Analogue a Mic/Mola
Liphanele tse ka morao tsa Combo-XLR li fana ka phihlello ea li-microphone tsa boemo ba analogue (ka XLR kapa li-input tsa line-level ka jack ea TRS).
Sebelisa likonopo tsa LINE karolong e ka pele ho fetola pakeng tsa likhetho tse peli. Ntle le moo, sebelisa Linepe tse inehetseng tse fumanehang ho sehokelo sa D-Sub (DB25).
Lihlahisoa tsa Analogue / Kenya li-Send
Li-XLR tsa basali tse ka morao li fana ka phihlello ea liphetho tse leka-lekaneng tsa analogue, tse ka sebeletsang morero oa ho sebetsa joalo ka li-insert tsa ho hokela lisebelisoa tsa ts'ebetso tsa kantle.
Kenya Returns & Linepe Inputs
Sehokelo se ka morao sa D-Sub se fana ka phihlello ea lipehelo tse kentsoeng le likenyelletso tse inehetseng tsa mela. U ka fumana ho le bonolo haholoanyane ho hokahanya lisebelisoa tsa mohala ka sehokelo sena, ho tlosa tlhoko ea ho notlolla/ho kenya hape Combo-XLRs. D-Sub to Female XLR breakout looms e lokela ho sebelisoa ho fihlella likhokahano tsena.
TRS le DB25 li hokahantsoe ka thata ka ho bapisa. Ho bohlokoa ho sebelisa e le 'ngoe feela/kapa ho qoba ho li sebelisa ka nako e le ngoe.
| Lihokelo tsa D-Sub | Lipontšo |
| 1 | Channel 1 Insert Return |
| 2 | Channel 2 Insert Return |
| 3 | Channel 3 Insert Return |
| 4 | Channel 4 Insert Return |
| 5 | Kenyo ea Mohala oa 1 oa Mohala |
| 6 | Kenyo ea Mohala oa 2 oa Mohala |
| 7 | Kenyo ea Mohala oa 3 oa Mohala |
| 8 | Kenyo ea Mohala oa 4 oa Mohala |
EKETSANG MATS'ELA
ADAT OUT - tlhahiso ea optical ADAT e fana ka phetisetso ea dijithale ho fihla ho liteishene tse 8 ho 44.1 / 48 kHz, liteishene tse 4 ho 88.2 / 96 kHz (S / MUX) kapa liteishene tse 2 ho 176.4 / 192 kHz (S / MUX).
LINKI
E fana ka mokhoa o bonolo oa ho theola li-unit tse 2 x PURE DRIVE QUAD hammoho, ho lumella thapo e le 'ngoe ea ADAT ea optical hore e hoketsoe sesebelisoa seo u eang ho sona. E boetse e fana ka mokhoa oa ho amohela ADAT e le mohloli oa clocking ho unit - haeba u etsa joalo, etsa bonnete ba hore u khetha ADAT e le mohloli oa oache u sebelisa konopo ea CLK karolong e ka pele.
| ADAT TSOA HO HLOKOMELA DRIVE CLOCK LATELANG UNIT | ADAT IN (Yuniti ea ho Amohela) mohlala SSL 12 |
| Channel 1 (ho tloha ho Molateli oa Tshupanako) | ADAT HO 1 |
| Channel 2 (ho tloha ho Molateli oa Tshupanako) | ADAT HO 2 |
| Channel 3 (ho tloha ho Molateli oa Tshupanako) | ADAT HO 3 |
| Channel 4 (ho tloha ho Molateli oa Tshupanako) | ADAT HO 4 |
| Channel 1 (ho tsoa ho Master) | ADAT HO 5 |
| Channel 2 (ho tsoa ho Master) | ADAT HO 6 |
| Channel 3 (ho tsoa ho Master) | ADAT HO 7 |
| Channel 4 (ho tsoa ho Master) | ADAT HO 8 |
AES/EBU TSOA
Liphetho tsa AES/EBU li fumaneha e le lipara tse 1/2 le 3/4 ka lihokelo tsa basali tsa XLR.
Ka kopo elelloa hore kaho ea thapo ea AES/EBU e fapana le ea lithapo tse tloaelehileng tsa XLR/maekrofono e le ho netefatsa litlhoko tse itseng tsa impedance. Ka kopo sebelisa AES/EBU cabling e boletsoeng.
LENTSOE LEBAKA
Kenyelletso ea oache ea mantsoe e iketselitseng le liphetho li fanoa ho likhokahanyo tsa BNC. Konopo ea 75Ω TERM e fana ka mokhoa oa ho emisa ho kenya lentsoe oacheng. Kenya konopo ena haeba u ntse u tšupa PURE DRIVE ka mokhoa oa ho kenya lentsoe oacheng 'me ke sesebelisoa sa ho qetela sa ketane ea oache.
IEC Mains Inlet
PURE DRIVE e sebelisa motlakase o itsamaisang. Hokela feela IEC ho sokete ea motlakase ea mains 'me u sebelise switch ea rocker ho matlafatsa yuniti ho tima/ho tima.
USB
Sehokelo sa mofuta oa USB 'C' se fana ka phihlello ea sehokelo sa audio sa USB se hahelletsoeng kahare. Hokela sena ho sistimi ea hau ea komporo / DAW.
USB Audio interface
Sesebelisoa sa audio se hahelletsoeng ka har'a USB se fana ka mokhoa o bonolo oa ho hatisa liphetho tsa PURE DRIVE ka kotloloho ho DAW ea hau. Hlokomela hore PURE DRIVE e tla itlhahisa e le sehokelo sa molumo se nang le liphetho tse 0, ntle le haeba o hlophisa liphetho tsa dijithale hore li tsoe ho
liphetho tsa DAW tsa hau u sebelisa menyu ea Litlhophiso sesebelisoa.
Ho kenya Mokhanni
Mac OS - PURE DRIVE e lumellana le sehlopha sa Mac Core Audio - ha ho hlokahale hore ho kenngoe mokhanni!
Windows - Kenya SSL USB ASIO/WDM Audio Driver. Latela mehato e ka tlase.
Mohato oa 1
Khoasolla le ho kenya SSL USB ASIO/WDM Audio Driver ho tsoa ho SSL websaete (Leqephe le jarollotsoeng). Ha e se e jarollotsoe, bula sesebelisoa sa "SSL USB Control Panel" ebe u khetha sesebelisoa sa hau sa PURE DRIVE.
Mohato oa 2
Ha sesebelisoa sa hau se khethiloe, ea ho tabo ea Sesebelisoa sa ASIO 'me u hokela PURE DRIVE QUAD ho e' ngoe ea li-driver tse 4 tse fumanehang tsa ASIO mohlala SSL ASIO Driver 1.
Mohato oa 3
Ho DAW ea hau, khetha e tšoanang ASIO Driver e le sebopeho sa hau sa molumo. Ho sena mohlalaample, khetha SSL ASIO Driver 1.
Aggregate Soundcard (Mac feela)
PURE DRIVE ha e na karolo ea ho beha leihlo bakeng sa ho bapala. Kahoo, o kanna oa lakatsa ho nahana ka ho sebelisa sesebelisoa sa Mac OS Aggregate Device ho sebelisa PURE DRIVE haufi le sebopeho sa audio se teng se etsang. ExampLe ka ho le letona ho bonts'a SSL 2 le PURE DRIVE QUAD li sebelisoa 'moho empa sena e ka ba sebopeho sefe kapa sefe sa molumo. Bakeng sa tlhaiso-leseling e batsi mabapi le ho theha le ho sebelisa lisebelisoa tse kopaneng, ka kopo sheba litokomane tsa Mac OS.
USB Audio Interface/DAW Inputs
Palo ea lintho tse kenang ho DAW e itšetlehile ka samptekanyo eo u sebetsang ho eona:
44.1/48 kHz
| MOHLOLI MOFUTA | LEBITSO LA MOHLOLI | DAW Input (ka USB) |
| LITŠOANTŠISO TSA ANALOGUE 1-4 | Mic/Line/Inst Analogue Ho 1 | 1 |
| Min./Line/analogue ea ho qetela Ho 2 | 2 | |
| Mic/Line/Inst Analogue Ho 3 | 3 | |
| Min/Mola/41st Analogue Ho 4 | 4 | |
| ADAT LINK IN | ADAT ho 1 | 5 |
| ADAT ho 2 | 6 | |
| ADAT ho 3 | 7 | |
| ADAT ho 4 | 8 | |
| ADAT ho 5 | 9 | |
| ADAT ho 6 | 10 | |
| ADAT ho 7 | 11 | |
| ADAT ho 8 | 12 |
88.2/96 kHz
| MOHLOLI MOFUTA | LEBITSO LA MOHLOLI | DAW Input (ka USB) |
| LITŠOANTŠISO TSA ANALOGUE 1-4 | Mic/Line/Inst Analogue Ho 1 | 1 |
| Analogue ea Mic/Linellnst Ho 2 | 2 | |
| Mic/Line/Inst Analogue Ho 3 | 3 | |
| Mic/Line/lnst Analogue Ho 4 | 4 | |
| ADAT LINK IN | ADAT ho 1 | 5 |
| ADAT ho 2 | 6 | |
| ADAT ho 3 | 7 | |
| ADAT ho 4 | 8 |
176.4/192 kHz
| MOHLOLI MOFUTA | LEBITSO LA MOHLOLI | DAW Input (ka USB) |
| LITŠOANTŠISO TSA ANALOGUE 1-4 | Mic/Line/Inst Analogue Ho 1 | 1 |
| Mic/Line/lnst Analogue Ho 2 | 2 | |
| Mic/Line/Inst Analogue Ho 3 | 3 | |
| Mic/Line/lnst Analogue Ho 4 | 4 | |
| ADAT LINK IN | ADAT ho 1 | 5 |
| ADAT ho 2 | 6 |
Ho rera bocha Liphetho tsa Dijithale joalo ka Litholoana tsa DAW
Ka tloaelo, liphetho tsa AES tsa dijithale le ADAT li feptjoa ho tloha ho Analogue ho ea ho Digital converter. ke hore, lisebelisoa tsa analogue li fetoleloa ho ADAT le AES. Leha ho le joalo, hoa khoneha ho rera hape liphetho tsa AES le ADAT (ka boikemelo) le ho li fepa ho tsoa ho DAW (joalo ka
outputs) ka USB ho e-na le hoo. Ka kopo sheba karolo ea Litlhophiso ea bukana ea mosebelisi bakeng sa litaelo tsa ho etsa sena.
USB audio interface / DAW Outputs
Palo ea liphetho tse fumanehang ho DAW e ipapisitse le sample rate eo u sebetsang ho eona. Hape hlokomela hore le haeba u lokisa liphetho tsa AES/EBU hore li feptjoe ho tsoa ho ADC (default setting), haeba u nolofalitse ADAT hore e feptjoe ho tsoa ho USB liphetho tsa AES/EBU li ntse li tla bonts'a ha li hokahantsoe le komporo. ha ho lets'oao le fetisoang ho bona ho tsoa ho USB. Sena ke ho boloka tatellano ea lenane la lihlahisoa ka mokhoa o ts'oanang.
44.1/48 kHz
| DAW Output (ka USB) | TS'ELISITSOE KHAI | MOTLATSI SEKONYELA |
| 1/2 | AES EEO Tsoa 1/2 | AES EBU XLR LITŠOANTŠISO |
| 3;4 | AES EBU E tsoa 3/4 | |
| 5 | ADAT Out 1 | EKETSANG MATS'ELA |
| 6 | ADAT Out 2 | |
| 7 | ADAT Out 3 | |
| 8 | ADAT Out 4 | |
| 9 | ADAT Out 5 | |
| 10 | ADAT Out 6 | |
| 11 | ADAT Out 7 | |
| 12 | ADAT Out 8 |
88.2/96 kHz
| DAW Output (ka USB) | TS'ELISITSOE KHAI | MOTLATSI SEKONYELA |
| 1/2 | AES EBU E tsoa 1/2 | A LITŠOANTŠISO TSA AES/EBU XLR |
| 3/4 | AES EBU E tsoa 3/4 | |
| 5 | ADAT Out 1 | EKETSANG MATS'ELA |
| 6 | ADAT Out 2 | |
| 7 | ADAT Out 3 | |
| 8 | ADAT Out 4 |
176.4/192 kHz
| DAW Output (ka USB) | TS'ELISITSOE KHAI | MOTLATSI SEKONYELA |
| 1/2 | AES EBU E tsoa 1/2 | A LITŠOANTŠISO TSA ES/EBU XLR |
| 3/4 | AES EBU E tsoa 3/4 | |
| 5 | ADAT Out 1 | EKETSANG MATS'ELA |
| 6 | ADAT Out 2 |
Lisebelisoa tsa Firmware
Nako le nako, ho ka ba le liapdeite tsa firmware tse fumanehang ka sesebelisoa sa SSL USB Audio Firmware Updater (Mac/Windows).
Lintlafatso tse joalo li tla ngoloa sebakeng sa Ts'ehetso sa SSL.
Ho kgothaletswa ho qoba ho sebelisa hub ea USB mme ho e-na le hoo sebelisa khokahanyo e tobileng ea USB pakeng tsa PURE DRIVE le khomphuta ea hau ha u etsa lintlafatso tsa firmware.
Litlhophiso
Ho na le litlhophiso tse 'maloa tse hlophisehang tse fumanehang bakeng sa PURE DRIVE QUAD.
Ho fihlella tsena, tobetsa konopo ea CLK ha yuniti e ntse e sebetsa.
Bala lintlha tse maqepheng a latelang ho utloisisa hore na ke li-switches life tse amang maemo afe ka ho khetheha.
Ha o qetile ho lokisa li-setting, tobetsa o hatelle konopo ea STANDBY 'me yuniti e tla khutlisa mokhoa o tloaelehileng oa ho sebetsa.
Sebopeho sa Litlhophiso - Ho Fetileview 'Mapa
Ka tlase ke mokhoa o potlakileng oa ho tseba hore na ke litaolo/likonopo life tse amang tlhophiso ka 'ngoe, ha u habanya feela.
Konopo Khanya
Maemo a 8 a khanya a teng bakeng sa mabone a likonopo. Boemo ba feme: Mohato 5 ho 8.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa likonopo tsa Channel 1 +48V le LINE ho fokotsa/ho eketsa khanya.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Limithara Khanya
Maemo a 8 a khanya a teng bakeng sa limithara. Boemo ba feme: Mohato 8 ho 8.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa likonopo tsa Channel 1 ZΩ le DRIVE ho fokotsa/ho eketsa khanya.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Relay Feedback
O ka thusa / tima konopo ea ho fetisa maikutlo (tobetsa ka mokhoa o utloahalang ha konopo e tobetsoa). Sena se ama tatellano ea ho qala le ts'ebetso e tloaelehileng.
Ho fetola lipakeng tsa butle le ho koalloa:
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Tobetsa taolo ea TRIM ea Channel 1. Haeba Ø LED e bonesitsoe ka BOTALA, relay maikutlo a bulehile (kamehla).
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Autopower On Enable
Autopower On ke paramethara e hlalosang hore na yuniti e lokela ho qala ka bo eona ha motlakase o sebelisoa, kapa e lule e le Boemong ba Standby. Tlhophiso ea kamehla e lumelletsoe.
Ho fetola lipakeng tsa butle le ho koalloa:
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Tobetsa taolo ea TRIM ea Channel 2. Haeba Ø LED e bonesitsoe ka BOTALA, Autopower On e tla sebetsa. Haeba Ø LED e timme, Autopower On e koetsoe.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Auto Standby (Boroko) Mode Lumella
Ntle le ho kenya PURE DRIVE ho Boemo ba Standby (Boroko) ka letsoho ho tsoa phanele e ka pele, yuniti e ka e kenya ka bo eona kamora nako e itseng ea ho se sebetse. Ho se sebetse ho ka bolela hore lipitsa le/kapa li-switches ha li so sebetsoe. E ka boela ea bolela hore ha ho na molumo o teng ka holimo ho 0 dBu. Ka kamehla, Auto Standby Mode e koetsoe. Ho fetola lipakeng tsa ho bulela le ho koalehile:
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Tobetsa taolo ea TRIM ea Channel 4. Haeba Ø LED e bonesitsoe ka BOTALA, Auto Standby Mode e tla buleha. Haeba Ø LED e timme, Auto Standby Mode e Buletsoe e koetsoe (kamehla).
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Nako ea ho ema ha Auto (Boroko)
Haeba u nolofalitse Auto Standby Mode, u ka lokisa nako ea ho tsoa (chelete ea nako pele e kenella ka bo eona) ka ho sebelisa likonopo tsa Channel 4 ZΩ le DRIVE ho fokotsa/ho eketsa nako ea nako. Litlhophiso tsa kamehla ke metsotso e 20.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Netefatsa hore Auto Standby Mode e lumelletsoe (sheba tlhaloso ea litlhophiso tse fetileng).
- Sebelisa likonopo tsa Channel 4 ZΩ le DRIVE ho fokotsa/ho eketsa nako ea ho ema ha Auto.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Boemo ba hona joale ba nako bo bontšoa likarolong tse 4 tse ka tlaase tsa methara ka mokhoa oa binary. LSB e ka ho le letšehali, MSB e ka ho le letona. Nomoro ea binary e atolositsoeng ka metsotso e 5 e fana ka kakaretso ea nako ea nako. Sheba leqephe le latelang bakeng sa tafole e hlalosang likhetho.
Tafole ea Nako ea ho Sebetsa ea Auto Standby
| LED ea pele | Leseli la bobeli la LED | 3 ea LED | LED ea bone | Tlmeout |
| 0 | 0 | 0 | 0 | 15 metsotsoana |
| 1 | 0 | 0 | 0 | 5 mets |
| 0 | 1 | 0 | 0 | 10 mets |
| 1 | 1 | 0 | 0 | 15 mets |
| 0 | 0 | 1 | 0 | Metsotso e 20 (ea kamehla) |
| 1 | 0 | 1 | 0 | 25 mets |
| 0 | 1 | 1 | 0 | 30 mets |
| 1 | 1 | 1 | 0 | 35 mets |
| 0 | 0 | 0 | 1 | 40 mets |
| 1 | 0 | 0 | 1 | 45 mets |
| 0 | 1 | 0 | 1 | 50 mets |
| 1 | 1 | 0 | 1 | 55 mets |
| 0 | 0 | 1 | 1 | 60 mets |
| 1 | 0 | 1 | 1 | 65 mets |
| 0 | 1 | 1 | 1 | 70 mets |
| 1 | 1 | 1 | 1 | 75 mets |
Ho rera bocha Liphetho tsa Dijithale joalo ka Litholoana tsa DAW
Ka ho sa feleng, liphetho tsa AES le ADAT li fepeloa ke lets'oao le tsoang ho Analogue to Digital Converters - ke hore, li-input tsa Analogue li fetoleloa ho ADAT le AES. Ka boikhethelo, hoa khoneha ho khetha molumo ho tsoa ho DAW (liphetho) ka USB joalo ka mohloli - ke hore, rera hape liphetho tsa AES le ADAT (ka boikemelo) mme ho e-na le hoo u li fepe ho tsoa ho DAW (joalo ka liphetho) ka USB.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa konopo ea Channel 2 +48V ho fetola pakeng tsa ADC kapa USB bakeng sa liphetho tsa AES.
- Sebelisa konopo ea Channel 2 LINE ho fetola pakeng tsa ADC kapa USB bakeng sa tlhahiso ea ADAT.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Litholoana tsa AES
Mobala oa Konopo ea Channel 2 +48V: Dim White = mohloli oa ka hare oa ADC (ka ho sa feleng)
Mobala oa Konopo ea Channel 2 +48V: Khubelu = Mohloli oa USB oa DAW
ADAT Sephetho
Mobala oa Konopo ea Channel 2 LINE: Dim White = mohloli oa ka hare oa ADC (ka ho sa feleng)
Mobala oa Konopo ea Channel 2 LINE: Bosoeu bo Khanyang = Mohloli oa USB oa DAW
Safe Mode bakeng sa INSERT le Ø Push Functions
Ts'ebetso ea INSERT le Ø (Polarity Flip) e ka fetoloa ka ho sutumelletsa taolong ea GAIN le TRIM. Maemong a mang a mahlonoko, baenjiniere ba ka khetha ho fokotsa kotsi ea ho sutumelletsa mesebetsi ena ka phoso kaha ba na le bokhoni ba ho sitisa kapa ho fetola molumo ntle le morero. Ka hona, Safe Mode e eketsa nako eo taolo e tlamehang ho sututsoa ka eona e le hore ts'ebetso e ka buleha kapa ea tima.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa konopo ea Channel 2 ZΩ ho bulela/ tima mokhoa o bolokehileng. Bosoeu bo lefifi = ts'ebetso e tloaelehileng. Khubelu = Mokhoa o bolokehileng o buletsoe.
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Tlhoro ea tlhoro
U ka fetola karolo ea "peak hold meter" hore e lumellane le khetho ea hau.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa konopo ea Channel 3 ZΩ ho khetha boemo boo u bo ratang ba ho ts'oara tlhoro (sheba lenane le ka tlase).
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Konopo ea Channel 3 ZΩ:
Bosoeu bo lefifi: TIMA
Botala: 1 motsotsoana
Orange: metsotsoana e 3 (ka ho sa feleng)
Khubelu: metsotsoana e 10
Phallo ea Metara
O ka fetola nako ea ho lokolloa ha metara (ballistics) ho lumellana le seo u se ratang.
- Kenya mokhoa oa Li-setting ka ho tšoara konopo ea CLK ha o ntse o kenya yuniti e bulelang.
- Sebelisa konopo ea Channel 3 DRIVE ho khetha mokhoa oo u o ratang oa tokollo ea mitha (sheba lenane le ka tlase).
- Boloka li-setting tsa hau le ho Tsoa ho Litlhophiso ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng. Ntle le moo, tsoela pele ho etsa litokiso ho litlhophiso tse ling pele u nka mohato ona.
Konopo ea Channel 3 DRIVE:
Botala: Butle
Orange: E tloaelehileng (ea kamehla)
Khubelu: Ka potlako
Hlahisa Fektheri bocha
Ho khutlisetsa yuniti sebakeng sa ho romelloa ha fektheri, u ka etsa reset ea fektheri ka ho latela litaelo tsena:
- Nakong ea matla a yuniti, tobetsa 'me u tšoare konopo ea Channel 1 +48V le likonopo tsa Channel 4 DRIVE ho fihlela likonopo tsohle tsa ZΩ li benya bofubelu.
- Lokolla likonopo tse ts'oeroeng 'me yuniti e tla qala hape ka bo eona ha li-setting tsa feme li khutlisitsoe.
Tobetsa 'me u tšoare ka bobeli likonopo tsa Channel 1 +48V le Channel 4 DRIVE nakong ea boot ho etsa hore fektheri e lokisoe bocha.
Litlhophiso tse angoang ke Factory Reset:
- Fetola maemo
- Shaft switch e bolela
- Likonopo tse Khanyang (kamehla: boemo ba 5 ba 8)
- Khanya ea Limithara (kamehla: boemo ba 8 ba 8)
- Fetisetsa maikutlo (kamehla: ON)
- Motlakase o butse (kamehla: o butse)
- Auto Standby Mode (ea kamehla: e holofetse)
- Nako ea ho emisa ka Auto Standby (kamehla: 20 min)
Ho batle phoso
Pontšo ea UID
UID Display Mode e bonts'a nomoro ea UID ea firmware e ntseng e sebelisoa hajoale le ntlafatso ea hardware ea karete ea mantlha le karete ea phanele e ka pele. Ho kenya UID Display Mode, tobetsa o hatelle
RATE konopo nakong ea tatellano ea matla-up.
Nomoro ea linomoro bakeng sa ntho ka 'ngoe:
- Firmware UID: Nomoro ea linomoro tse 5
- Phetoho ea Mainboard HW: Nomoro ea linomoro tse 1
- Frontpanel HW revision: 1 nomoro ea nomoro
Li-digit li hlahisoa ka bonngoe ho limithara ho binary. Nomoro ka 'ngoe e bonts'oa moleng oa li-LED tsa metha:
Ho tloha holimo:
Mola oa 1 ho isa ho oa bohlano: Firmware UID 5st ho isa ho ea 1th
Ho tloha tlase:
Mola oa 1: Mainboard HW revision digit
Mola oa 2: Frontpanel HW revision digit
Ho se bonese ho bolela “0”, ha ho letsitsoe ho bolela “1”. Sheba tafole:
| LED ea pele | Leseli la bobeli la LED | 3 ea LED | LED ea bone | Dijithale |
| 0 | 0 | 0 | 0 | 0 |
| 0 | 0 | 0 | 1 | 1 |
| 0 | 0 | 1 | 0 | 2 |
| 0 | 0 | 1 | 1 | 3 |
| 0 | 1 | 0 | 0 | 4 |
| 0 | 1 | 0 | 1 | 5 |
| 0 | 1 | 1 | 0 | 6 |
| 0 | 1 | 1 | 1 | 7 |
| 1 | 0 | 0 | 0 | 8 |
| 1 | 0 | 0 | 1 | 9 |
Tsoa ho UID Display mode ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng.
Ha u tsebe hantle hore na u ka bala litaba joang? Nka senepe 'me Moenjiniere oa Tšehetso o tla u thusa
Soak le Potentiometer Test Mode
Soak mode e sebelisoa ho lekola ts'ebetso e nepahetseng ea mabone ohle le matšoao a phanele e ka pele. E potoloha ka mekhahlelo e thathamisitsoeng ka tlase. Ho kenya Soak mode, tšoara likonopo tsa Channel 1 +48V le LINE nakong ea tatellano ea ho phahamisa matla.
- Li-switches tsohle li khantša bosoeu bo khanyang, haeba bo le teng (ho seng joalo bo tima) + mohlala oa limithara
- Li-switches tsohle li na le mabone a khubelu, haeba a le teng (ho seng joalo a soeufetse) + mohlala oa limithara
- Li-switches tsohle li khantša botala, haeba li le teng (ho seng joalo bosoeu bo fifetseng) + mohlala oa limithara
- Lipontšo tsohle li khantšitse (tse tala kapa tse khubelu, ho itšetlehile ka ts'ebetso) + mohlala oa limithara
- Ho tšoana le 1 empa limithara tse tletseng mabone
- Ho tšoana le 2 empa limithara tse tletseng mabone
- Ho tšoana le 3 empa limithara tse tletseng mabone
- Ho tšoana le 4 empa limithara tse tletseng mabone
Ka mokhoa ona hoa khoneha ho hlahloba ts'ebetso e nepahetseng ea potentiometers. Ho fetoha ha maemo ho lipitsa life kapa life ho tla etsa hore relay e tobetse joalo ka maikutlo a netefatso.
Channel 1 GAIN e laola lebelo leo lipaterone li tsamaisoang ka lona.
Boemo bo felletseng ba CCW bo emisa animation mohatong oa hajoale. Ho potoloha konopo ho leba nqa ya tshupanako ho tla eketsa lebelo la paterone.
Tsoa ho Mokhoa oa Teko oa Soak le Potentionmeter ka ho tšoara konopo ea STANDBY ho fihlela motlakase o khutlela tšebetsong e tloaelehileng.
Litlhaloso
Maemo a kamehla a tlhahlobo (ntle le haeba ho boletsoe ka tsela e 'ngoe):
Mohloli o sitisang sete ea liteko: 40Ω
Tšitiso e kentsoeng ea sete ea liteko: 100 kΩ
Khafetsa ea litšupiso: 1 kHz
Boemo ba litšupiso: 0 dBu
Litekanyo tsohle tse se nang boima li hlalositsoe e le 20 Hz ho isa ho 20 kHz bandwidth e lekanyelitsoeng, e hlahisitsoeng ho dBu.
Ho qala ho khaola (bakeng sa litekanyo tsa kamore ea hlooho) ho lokela ho nkoa e le 1% THD.
Maemo ohle a reretsoe ho leka-lekana, ntle le haeba ho hlalositsoe ka tsela e fapaneng ka ho hlaka.
ADC samptekanyo ea 48 kHz
HPF e holofalitsoe/e behiloe bonyaneng
TRIM e behiloe boemong ba bohareng (0 dB)
Phaello e behiloe bonyane
Z e behiloe holimo-limo (botala)
DRIVE e holofetse
Ntle le ha ho qotsitsoe ka tsela e 'ngoe lipalo tsohle li na le mamello ea ± 0.5dB kapa 5%.
Unit General
Matla
| Phepelo ea motlakase | Auto-Ranging 100-240 VAC |
| Matla a Tshebetso | <27 Watts |
| Boemo ba Standby | <4.8 Watts |
Ea nama
| Bophara | 482.6 limilimithara / 19 lisenthimithara |
| Bophahamo | 88.1 limilimithara / 3.5 lisenthimithara (2 RU) |
| Botebo | 302.8 mm / 11.9 inches (chassis feela) 338.4 mm / 13.3 inches (ho kenyeletsoa li-control panel tse ka pele le likhokahano tsa liphanele tse ka morao) |
| Boima ba 'mele | 5.9 lik'hilograma / 13 lbs |
| Litekanyo Boxed | 550mm x 470mm x 210mm (21.7″ x 18.5″ x 8.3″) |
Lihokelo
| Lintho tse kenang | Combo XLR x4 |
| Outputs/Kenya Send | Monna XLR x4 |
| Kenya Returns & Linepe Inputs | 25-way D-mofuta oa Mosali (D-Sub) x1 |
| Liphetho tsa AES/EBU | Monna XLR x2 |
| ADAT Output le ADAT Link In | Optical TOSLINK Port x2 |
| Kenyeletso le Sephetho sa Wordclock | Sehokelo sa BNC x 2 |
| USB | 'C' Mofuta oa USB Port x1 |
Mic In ho Kenya Romela
| Tekanyo | Boleng | Maemo |
| Kena Impedans | 12 k0 | Boemo bo botala |
| 1.2 k0 | Dim White setting | |
| 6000 | Boemo ba Orange | |
| 4000 | Boemo bo bofubelu | |
| Sephetho se Impedans | 700 | - |
| Fumana | 4.8 dB e tloaelehileng ± 0.1dB | 5 dB phaello |
| 11.3 dB e tloaelehileng ± 0.1dB | 11 dB phaello | |
| 16.6 dB e tloaelehileng ± 0.1dB | 17 dB phaello | |
| 22.9 dB e tloaelehileng ± 0.1dB | 23 dB phaello | |
| 28.9 dB e tloaelehileng ± 0.1dB | 29 dB phaello | |
| 35.3 dB e tloaelehileng ± 0.1dB | 35 dB phaello | |
| 41.6 dB e tloaelehileng ± 0.1dB | 41 dB phaello | |
| 47.5 dB e tloaelehileng ± 0.1dB | 47 dB phaello | |
| 53.3 dB e tloaelehileng ± 0.1dB | 53 dB phaello | |
| 59.2 dB e tloaelehileng ± 0.1dB | 59 dB phaello | |
| 65.5 dB e tloaelehileng ± 0.1dB | 65 dB phaello | |
| Fumana Matching | <0.08dB | Boemo bofe kapa bofe ba phaello |
| Mokatong oa Lerata (O se nang boima) | < -97.3 dBu | 17 dB, e se nang boima, 20 Hz - 20kHz, 150R ho felisoa |
| EIN | -130.0 dBu e tloaelehileng, -129.0 dBu lebitso | 65 dB, A-e boima, 20 Hz - 20kHz. 150R ho felisoa |
| Karabelo ea Khafetsa | ±0.2 dB | 20 ho isa ho 20 kHz, phaello efe kapa efe |
| THD+N Karolelano | <-92 dB / 0.0025% | 17 dB, 20 dBu ntle. 1 kHz |
| Crosstalk | <-108 dB | Aggressor 15 dBu 50 Hz in, 5 dB fumana. 20 dBu kantle ho liteishene tse haufi 150R terminator, phaello ea 35 dB |
| <-105 dB | Aggressor 15 dBu 1 kHz in, 5 dB gain, 20 dBu tsoa likanale tse haufi 150R terminator, 35 dB phaello | |
| < - 81 dB | Aggressor 15 dBu 10 kHz in, 5 dB phaello. 20 dBu kantle ho liteishene tse haufi 150R terminator, phaello ea 35 dB | |
| Boemo bo phahameng ba ho Kena | > 21.5dBu | Phaello e fokolang |
Line In ho Kenya Romela
| Tekanyo | Boleng | Maemo |
| Kena Impedans | 22 lik'hilograma | |
| -0.4 dB e tloaelehileng ± 0.1dB | 0 dB phaello | |
| Fumana | 3.0 dB e tloaelehileng ± 0.1dB | 3 dB phaello |
| 6.1 dB e tloaelehileng ± 0.1dB | 6 dB phaello | |
| 8.7 dB e tloaelehileng ± 0.1dB | 9 dB phaello | |
| 11.4 dB e tloaelehileng ± 0.1dB | 12 dB phaello | |
| 14.8 dB e tloaelehileng ± 0.1dB | 15 dB phaello | |
| 17.7 dB e tloaelehileng ± 0.1dB | 18 dB phaello | |
| 20.7 dB e tloaelehileng ± 0.1dB | 21 dB phaello | |
| 23.6 dB e tloaelehileng ± 0.1dB | 24 dB phaello | |
| 27.4 dB e tloaelehileng ± 0.1dB | 27 dB phaello | |
| 30.0 dB e tloaelehileng ± 0.1dB | 30 dB phaello | |
| Fumana Matching | <0.08dB | Boemo bofe kapa bofe ba phaello |
| Mokatong oa Lerata (O se nang boima) | -89.7dBu e tloaelehileng | 0 dB, e se nang boima, 20 Hz - 20kHz, 150R ho felisoa |
| THD+N Karolelano | -89.6 dB / 0.0033% e tloaelehileng | 0 dB, 0 dBu ntle. 1 kHz |
| Boemo bo phahameng ba ho Kena | 26.5dBu | Phaello e fokolang |
Hi-Z ho Kenya Romela
| Tekanyo | Boleng | Maemo |
| Kena Impedans | 1 MΩ (e sa leka-lekanang) | - |
| 10.9 dB e tloaelehileng ± 0.1dB | 11 dB phaello | |
| Fumana | 14.3 dB e tloaelehileng ± 0.1dB | 14 dB phaello |
| 17.4 dB e tloaelehileng ± 0.1dB | 17 dB phaello | |
| 20.0 dB e tloaelehileng ± 0.1dB | 20 dB phaello | |
| 22.7 dB e tloaelehileng ± 0.1dB | 23 dB phaello | |
| 26.1 dB e tloaelehileng ± 0.1dB | 26 dB phaello | |
| 29.0 dB e tloaelehileng ± 0.1dB | 29 dB phaello | |
| 32.1 dB e tloaelehileng ± 0.1dB | 32 dB phaello | |
| 34.9 dB e tloaelehileng ± 0.1dB | 35 dB phaello | |
| 38.7 dB e tloaelehileng ± 0.1dB | 38 dB phaello | |
| 41.3 dB e tloaelehileng ± 0.1dB | 41 dB phaello | |
| Fumana Matching | <0.08dB | Boemo bofe kapa bofe ba phaello |
| Mokatong oa Lerata (O se nang boima) | <86 dBu e tloaelehileng | 11 dB, e se nang boima, 20 Hz - 20kHz, 150R ho felisoa |
| Boemo bo phahameng ba ho Kena | > 15.5 dBu (e sa leka-lekanang) | Phaello e fokolang |
Kenya Khutlela ho ADC
| Tekanyo | Boleng | Maemo |
| Kena Impedans | 10 lik'hilograma | - |
| ADC Line-up | 24.0dBu | - |
| Karabelo ea Khafetsa | ±0.035 dB
-3 dB e theoha tlaase <5 Hz |
Linearity, leha e le efe sample sekhahla
-3 dB roll-off, leha e le efe sample sekhahla |
| THD+N Karolelano | -105 dB / 0.0005% e tloaelehileng | 20 dBu, 1 kHz |
| Dynamic Range | 119 dB e tloaelehileng | 20 Hz ho isa ho 20 kHz, e boima ba A |
| Crosstalk | <105dB | 23.9 dBu ho, 20 Hz ho isa ho 20 kHz, 1
e tsamaisoang ke kanale, likanale tse ling kaofela 150R fedisitsoe |
| <-115 dB | 23.9 dBu ho, 1 kHz, 1 channel e tsamaisoang, kaofela
likanale tse ling 150R li felisitsoe |
Sesefa sa Trim & High-Pass (HPF)
| Tekanyo | Boleng | Maemo |
| Fokotsa Phaello Matching | <0.04dB | Boemo bofe kapa bofe ba phaello |
| HPF Frequency Tolerance | 5% | Boemo bofe kapa bofe ba HPF |
Setšoantšo se Thibeloang
Litlhokomeliso tsa Polokeho
Kakaretso Polokeho
- Ka kopo bala 'me u boloke tokomane ena 'me u latele litemoso le litaelo tsohle.
- Sesebelisoa sena sa motlakase ha sea lokela ho pepesetsoa lerole, metsi, kapa maro a mang.
- Hloekisa feela ka lesela le omeletseng kapa lihlahisoa tse tsamaellanang le lisebelisoa tsa motlakase, 'me le ka mohla u se ke ua sebelisa ha yuniti e tsamaisoa.
- Se ke oa sebetsa haufi le mehloli efe kapa efe ea mocheso, khanyeng ea letsatsi kapa haufi le malakabe a hlobotseng.
- Se ke oa beha lintho tse boima holim'a yuniti.
- Sebelisa feela liphutheloana tse khothaletsoang ke moetsi.
- Tlosa sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe ka nako e telele.
- U SE KE UA fetola yuniti ena, liphetoho li ka ama ts'ebetso, polokeho le/kapa maemo a tumellano a machaba.
- Yuniti e ka sebetsoa feela ke basebetsi ba tšoanelehang - batla ts'ebeletso ea hang-hang haeba console e pepesitsoe ke metsi kapa e khaotsa ho sebetsa ka mokhoa o tloaelehileng.
- SSL ha e amohele boikarabello bakeng sa tšenyo e bakiloeng ke tlhokomelo, tokiso kapa ho fetoloa ke basebetsi ba sa lumelloeng.
- Ha u sebelisa sesebelisoa sena, se lokise rakeng e tloaelehileng ea 19" kapa u se behe sebakeng se sireletsehileng.
- Haeba rack e kentsoe, kenya li-screw tsohle. Liraka tsa rack lia khothaletsoa.
- Se ke oa thibela menyetla efe kapa efe ea moea. Kenya ho latela litaelo tsa moetsi.
- Kamehla lumella moea o sa lefelloeng ho potoloha yuniti bakeng sa pholileng.
- Netefatsa hore ha ho khatello e kentsoeng likhoeleng tse hoketsoeng sesebelisoa sena. Netefatsa hore lithapo tsohle tse joalo ha li behoe moo li ka hatoang, tsa huloa kapa tsa khoptjoa.
Tšireletseho ea Matla
- Sesebelisoa sena se na le lead lead, leha ho le joalo haeba u lakatsa ho sebelisa likhoele tsa mantlha tseo u li ratang, sheba lintlha tse latelang:
- Sheba leibole ea litekanyetso e ka morao ea yuniti 'me ka linako tsohle u sebelise khoele ea motlakase e loketseng.
- Yuniti e lokela ho HLAHALA e hloekisitsoe fatše.
- Ka kopo, sebelisa-e lumellanang le 60320 C13 TYPE SOCKET. Ha o hokela litsing tsa phepelo, etsa bonnete ba hore li-conductors le li-plug tse lekaneng li sebelisoa ho lumellana le litlhoko tsa motlakase tsa lehae.
- Boholo ba bolelele ba lithapo bo lokela ho ba 4.5m(15').
- Khoele e lokela ho ba le letšoao la tumello ea naha eo e tla sebelisoa ho eona.
Ho phaella moo:
- The coupler ea lisebelisoa e sebelisoa e le sesebelisoa sa ho hakolla, etsa bonnete ba hore e hokahane le lerako le sa thijoang.
- Hokela feela mohloling oa motlakase oa AC o nang le sekontiri se sireletsang fatše (PE).
- Hokela liyuniti ho lisebelisoa tsa karolo e le 'ngoe feela ka conductor e sa nke lehlakore e ka bang teng lefatšeng.
HLOKOMELA! Sehlahisoa sena se tlameha ho lula se le fatše.
TLHOKOMELO! Ha ho likarolo tse ka sebelisoang ke mosebelisi kahare. Ha ho ka ba le tshenyo ho yuniti ikopanye le Solid State Logic.
Ts'ebeletso kapa tokiso e tlameha ho etsoa ke basebetsi ba nang le litsebo feela.
Sehlahisoa sena se lumellana le Melao e latelang ea United Kingdom:
Melaoana ea UK ea Thepa ea Motlakase (Tshireletso) 2016 (SI 2016/1101)
UK Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).
Litlhoko tsa moralo oa Eco bakeng sa lihlahisoa tse amanang le Matla (ErP) 2009/125/EC.
Thibelo ea tšebeliso ea Lintho tse Kotsi ho Thepa ea Motlakase le Elektronike (RoHS2)
Melao ea 2012 (SI 2012/3032).
Sehlahisoa sena se lumellana le Melao e latelang ea European Union Harmonization:
EU Low Voltagtaelo ea e (LVD) 2014/35/EU,
EU Electromagnetic Compatibility directive (EMC) 2014/30/EU.
Litlhoko tsa moralo oa Eco bakeng sa lihlahisoa tse amanang le Matla (ErP) 2009/125/EC.
Thibelo ea Tšebeliso ea Lintho tse itseng tse Kotsi ho Taelo ea Thepa ea Motlakase le ea Elektronike (RoHS2) 2011/65/EU.
Litaelo tsa ho lahla WEEE ke basebelisi ba European Union
Letšoao le bontšitsoeng mona, le leng holim'a sehlahisoa kapa sephutheloana sa sona, le bontša hore sehlahisoa sena ha sea lokela ho lahloa le litšila tse ling. Ho e-na le hoo, ke boikarabello ba mosebedisi ho lahla thepa ea bona ea litšila ka ho nehelana ka eona sebakeng se khethiloeng sa pokello bakeng sa ho tsosolosa litšila tsa lisebelisoa tsa motlakase le tsa elektroniki. Pokello e arohaneng le ho sebelisoa hape ha thepa ea litšila ea hau nakong ea ho lahloa ho tla thusa ho baballa mehloli ea tlhaho le ho netefatsa hore e sebelisoa hape ka mokhoa o sireletsang bophelo bo botle ba batho le tikoloho. Ho fumana lintlha tse ling mabapi le moo u ka lahlang lisebelisoa tsa hau tsa litšila bakeng sa ho sebelisoa hape, ka kopo ikopanye le ofisi ea toropo ea heno, tšebeletso ea ho lahlela matlakala kapa moo u rekileng sehlahisoa.
Setifikeiti sa FCC
- Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) Sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Bakeng sa mosebelisi: - Se ke oa fetola yuniti ena! Sehlahisoa sena, ha se kentsoe joalo ka ha ho bonts'itsoe litaelong tse bukeng ea ho instola, se kopana le litlhoko tsa FCC.
- Bohlokoa: Sehlahisoa sena se khotsofatsa melao ea FCC ha likhoele tse sirelelitsoeng tsa boleng bo holimo li sebelisoa ho hokahana le lisebelisoa tse ling.
Ho hloleha ho sebelisa likhoele tse sirelelitsoeng tsa boleng bo holimo kapa ho latela litaelo tsa ho instola ho ka baka tšitiso ea makenete ea motlakase ho lisebelisoa tse joalo ka liea-le-moea le lithelevishene 'me ho tla hlakola tumello ea FCC ea ho sebelisa sehlahisoa sena USA. - Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokeha ho lokisa tšitiso eo ka litšenyehelo tsa hae.
Indasteri Canada Compliance
Sesebelisoa sena sa dijithale sa Sehlopha sa A se lumellana le Canadian ICES-003.
Liaparo tsa letsopa ke linomoro tsa la classe A est conforme à la norme NMB-003 du Canada.
Tšebelisano ea Motlakase
BS EN 55032:2015, Sehlopha sa A. BS EN 55035:2017.
TLHOKOMELISO: Likou tsa audio/output ke likou tse hlahlobiloeng 'me likhokahano life kapa life ho tsona li lokela ho etsoa ho sebelisoa thapo e sirelelitsoeng ka braid le likhetla tsa sehokelo sa tšepe ho fana ka khokahanyo e sa sebetseng hantle lipakeng tsa skrini sa thapo le sesebelisoa.
Tšireletseho ea Motlakase
IEC 62368-1:2018
BS EN IEC 62368-1:2020+A11:2020
CSA CAN/CSA-C22.2 No. 62368-1 3rd Ed.
UL 62368-1 3rd Mohl.
TLHOKOMELISO: Kankere le Kotsi ea Pelehi - www.P65 Litemoso.ca.gov
Tikoloho
Mocheso: Ho sebetsa: +1 ho isa ho 30 likhato tsa Celsius. Ho boloka: -20 ho isa ho 50 likhato tsa Celsius.
Boitsebiso bo eketsehileng
Bakeng sa boitsebiso bo eketsehileng, ho khoasolla lihlahisoa, motheo oa tsebo le tšehetso ea tekheniki etela www.solidstatelogic.com.
www.solidstatelogic.com
HLOKOMELA KHANANE
Litokomane / Lisebelisoa
 |
Solo e tiileng ea Naha SSL Origin Pure Drive Quad [pdf] Bukana ea Mosebelisi SSL Origin Pure Drive Quad, SSL, Origin Pure Drive Quad, Pure Drive Quad, Drive Quad, Quad |