SMARTRISE C4 Link 2 Programmer

Fetileview

Tokomane ena e fana ka litaelo tsa mohato ka mohato bakeng sa ho jarolla, ho kenya, le ho sebelisa Link2 Programmer e nang le balaoli ba C4. E hlalosa mokhoa oa ho kenya software ho molaoli oa C4 o sebelisa Link2 Programmer.

Required Tools for Software Programming

Lisebelisoa tse latelang lia hlokahala ho hlophisa software:

1.  Laptop e nang le sistimi e sebetsang ea Windows.
2. Lenaneo la Link2.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a websehokelo ho fihlella software ea morao-rao le likhatiso.

Application Download Instructions

Ho kenya software ho molaoli oa Smartrise, sesebelisoa sa lenaneo se tlameha ho kopitsoa ho laptop. Sesebelisoa sena se fumaneha ho flash drive. Latela mehato ena ho khoasolla sesebelisoa sa C4 Link2 Programmer:

1. Bula flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Fumana 'me u bule foldara ea C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Ho netefatsa ts'ebetso e nepahetseng, software ea taolo e tlameha ho kenngoa ho molaoli oa Smartrise o sebelisa Link2 Programmer. Latela mehato e ka tlase ho phethela tšebetso:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Batla software ea controller:
   1. Open (1) – Controller Software.
   2. Khetha foldara e nang le lebitso la mosebetsi.
   3. Khetha Koloi eo u tla kenya software bakeng sa eona.
   4. Tobetsa Khetha Folder botlaaseng ba fensetere.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • MR A: MCUA
      • MR B: MR MCUB
      • SRU A: CT le COP MCUA
      • SRU B: CT le COP MCUB
      • Riser/Katoloso: Riser/Katoloso board

Lihokelo tsa processor li ka fumanoa botong.

Start the software loading process by clicking the Start button.

Bohlokoa: Ha u hlophisa MR SRU, likoloi tse ling sehlopheng li ka ameha. Ho thibela sena, khaola li-terminals tsa sehlopha ka boto.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

ELA HLOKO: Haeba software e hloleha ho khoasolla, leka tse latelang:

1. Retry the process.
2. Sebelisa boema-kepe bo fapaneng ba USB.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Qala hape laptop.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Tsamaisetsa tlase ho view likhetho tsohle le ho netefatsa hore mofuta o lebelletsoeng oa hlaha.

LBH

P: Ke lokela ho etsa eng haeba ke kopana le liphoso nakong ea ho kenya software?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Litokomane / Lisebelisoa

SMARTRISE C4 Link 2 Programmer [pdf] Litaelo C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

Litšupiso

• Bukana ea Mosebelisi