SmartGen HAT520NC ATS molaoli
SmartGen - etsa hore jenereithara ea hau e be bohlale
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road, Zhengzhou, Profinseng ea Henan, Chaena Mohala: +86-371-67988888/67981888/67992951 +86-371-67981000(mosele)
- Fax: +86-371-67992952
- Lengolo-tsoibila: sales@smartgen.cn
- Web: www.smartgen.com.cn
Litokelo tsohle li sirelelitsoe. Ha ho karolo ea sengoliloeng sena e ka hlahisoang ka mokhoa ofe kapa ofe (ho kenyeletsoa ho kopitsoa kapa ho bolokoa ka mokhoa ofe kapa ofe ka mokhoa oa elektroniki kapa ka mokhoa o mong) ntle le tumello e ngotsoeng ea mong'a litokelo tsa litokelo. Likōpo tsa tumello e ngotsoeng ea mong'a litokelo tsa litokelo tsa ho hlahisa karolo efe kapa efe ea khatiso ena li lokela ho romelloa ho Smartgen Technology atereseng e ka holimo. Litšupiso life kapa life tse mabapi le mabitso a sehlahisoa a sebelisitsoeng ka har'a khatiso ena ke tsa lik'hamphani tse fapaneng. SmartGen Technology e na le tokelo ea ho fetola litaba tsa tokomane ena ntle le tsebiso pele.
| Letsatsi | Phetolelo | Hlokomela |
| 2020-03-02 | 1.0 | Tokollo ea mantlha. |
| 2020-03-13 | 1.1 | Sets'oants'o se fetotsoeng. |
| 2020-04-16 | 1.2 | Kenya phetiso ea othomathiki ea ho khutlisa / phetisetso ea othomathike e sa khutlisetsoeng
tlhaloso ea mosebetsi. |
| 2020-06-05 | 1.3 | Kenya mokhoa oa ho khutlisa othomathiki / phetiso ea othomathiki e sa buseleng litaelo bakeng sa mehato ea ho beha phanele. |
| 2022-08-04 | 1.4 | Nchafatsa mokhoa oa matsoho; ntjhafatsa letshwao la SmartGen. |
FEELAVIEW
HAT520NC ATS Controller e entsoe ka microprocessor ea mantlha, e ka khonang ho lekanya hantle 3 phase/single phase vol.tage ea litsela tse 2, etsa kahlolo e nepahetseng mabapi le abnormal voltages (matla a lahlehileng, ho feta/tlasa voltage, ho feta / ka tlase ho makhetlo a mangata, tahlehelo ea mohato, tatellano ea mekhahlelo e fosahetseng), le ho laola ATS ho fetisetsa ka mor'a hore ho lieha ho felile. E loketse bakeng sa No breaking ATS. Ha matla a 1# a sa tloaeleha, molaoli a ka romela lets'oao ho qala genset kamora "1# tieho e sa tloaelehang" e felile. "Li-remote tse tharo" (taolo e hole, tekanyo ea hole, le puisano e hole) e ka sebelisoa ka boema-kepe ba puisano ba RS485.
KETSAHALO LE LITŠOANTŠISO
Ts'ebetso ea li-controller le litšoaneleho li bonts'oa ka tlase:
- Lekanya le ho hlahisa 2-way 3-phase Voltage le Frequency:
- 1# 2# Mohala voltage (Uab, Ubc, Uca) Mola voltage (Uab, Ubc, Uca)
- Mokhahlelo oa voltage (Ua, Ub, Uc) Mokhahlelo voltage (Ua, Ub, Uc) Frequency Hz Frequency Hz
- Over/tlas'a voltage, tahlehelo ea mokhahlelo, tatellano ea mekhahlelo e fosahetse, ts'ebetso ea ho lemoha ho feta/tlas'a khafetsa. Joalo ka kamehla, tatellano ea mekhahlelo e fosahetse 'me ho lemoha ho feta/tlas'a khafetsa hoa tima; leha ho le joalo, basebelisi ba ka hlophisa tšebetso kamoo ba e hlokang.
- Boema-kepe ba puisano ba RS485 (SmartGen SG72 ikamahanya kapa ea hlokahala). E ka hlokomela ts'ebetso ea tlhophiso ea paramethara ea taolo hape e ka hlokomela ntlafatso ea firmware ea molaoli.
- Nako e tloaelehileng ea ho lieha ha matla a 1# kapa 2# e ka hlophisoa ( Range: 0~60 s le ho lieha ho qala ha Genset ho ka behoa ( Range: 0~3600 s
- Ho lieha ho sa tloaelehang ha matla a 1# kapa 2# ho ka behoa Range: 0~60 s le ho lieha ho emisa Genset ho ka behoa Range: 0~3600 s s.
- "1# Master", Backup e 'ngoe le e' ngoe "le" Master ” e ka hlophisoa ka phanele e ka pele ea taolo, ho hlokomela phepelo ea matla a 1#, phepelo ea matla a 2#, kapa mekhoa ea phepelo ea backup bakeng sa e mong ho fana ka matla.
- Lets'oao la Clos e le ka beoa joalo ka linako kapa joalo ka tlhahiso e tsoelang pele.
- 2 way N line moralo o ikhethileng.
- Phetiso ea mokhoa oa Auto/Manual. Ka mokhoa oa matsoho, phetiso ea 1 # switch kapa 2 # switch ea ATS e ka sebelisoa ka konopo ea konopo ea phanele.
- Li-LED tse kentsoeng phanele e ka pele li ka bonts'a hantle boemo ba ho sebetsa ba ATS.
- Bophahamo ba sehokelo sa 1 # le 2 # # phepelo ea phepelo ea matla (1 # CLOSE, 2 # CLOSE) ke 16A AC250V, khokahano ea mahala ea volts, e ka sebelisoa ka kotloloho ho khanna switch ho fetisetsa joalo-joalo.
- The dipholo tsa contactor bokgoni ba Genset qala relay (GENS START) ke 7A AC250V/7A DC28V, volts mahala Ka tloaelo Koala kopana.
- E loketse lisebelisoa tse fapaneng tsa AC (3 phase 4 terata, 2 phase 3 terata le single phase 2 terata).
- Moralo oa modular, khetla ea polasetiki ea ABS e khutlisang lelakabe, terminal e plugable, e kentsoeng ka hare, sebopeho se kopaneng se kentsoeng habonolo.
TS'ELISO
| Lintho | Litaba |
| Tshebetso Voltage | AC170V ~ 277V nakong ea phepelo ea matla a AC L1N1/L2N2. |
| Tšebeliso ea Matla | <2W (Mokhoa oa ho ema: <1W) |
| Mofuta oa AC Voltage Input 3P4W (ph-N)
1P2W (ph-N) 2P3W (ph-N) |
AC170V~AC277V(ph-N) AC170V~AC277V (ph-N) AC170V~AC277V(ph-N) |
| Rated Frequency | 50/60Hz |
| 1# Koala Relay Output | 16A AC250V Volts e hlahisoang mahala |
| 2# Koala Relay Output | 16A AC250V Volts e hlahisoang mahala |
| Gen Start Relay | 7A AC250V Volts e hlahisoang mahala |
| 1# Koala Kenyo | Khokahano ea COM ea sebetsa. |
| 2# Koala Kenyo | Khokahano ea COM ea sebetsa. |
| Puisano | RS485 Port, MODBUS Protocol |
| Litekanyo tsa Nyeoe | 139mmx120mmx50mm |
| Phanele Cucut | 130mmx111mm |
| Mocheso oa Mosebetsi | (-25~+70)°C; |
| Mongobo o sebetsang | (20~93)%RH |
| Mocheso oa polokelo | (-30~+80)°C |
| Boemo ba Tšireletso | IP65: ha gasket e sa keneleng metsi e kentsoe lipakeng tsa molaoli le taolo
fensetere; |
| Matla a Insulation | Kenya AC1.5kV voltage pakeng tsa matla a phahamengtage terminal le low voltage
terminal le leakage hajoale ha e fete 3mA nakong ea 1min. |
| Boima ba 'mele | 0.49kg |
TLHALOSO PANE
TŠEBELETSO PANE
TLHALOSO EA MOSEBETSI OA LESENYA
| Leseli la Pontshi | Tlhaloso ea Mosebetsi |
| 1 # Letšoao la Matla | E bonesoa ha 1 # matla a tloaelehile; ho benya ha 1# boemo ba matla
e sa tloaeleha; tima ha ho se na 1# matla. |
| 2#Sesupo sa Matla | E bonesoa ha 2 # matla a tloaelehile; ho benya ha 2# boemo ba matla
e sa tloaeleha; tima ha ho se na 2# matla. |
| 1 # Koala Lesupa | E bonesoa ha 1 # motlakase oa motlakase oa motlakase o sebetsa ha o tima
ha e koetsoe. |
| 2 # Koala Lesupa | E bonesoa ha 2 # motlakase oa motlakase oa motlakase o sebetsa ha o tima
ha e koetsoe. |
| Sesebelisoa sa Mokhoa oa Auto | E khantšoa ha molaoli a le maemong a auto ha a ntse a tima ha
molaoli o ka mokhoa oa matsoho. |
| Letšoao la Mokhoa oa Manual | E khantšoa ha molaoli a le ka mokhoa oa matsoho ha a ntse a tima ha
molaoli o maemong a auto. |
HLOKOMELA: Lipontšo Tlhaloso ka mor'a ho beha liparamente: Lintlha tse ling ka kopo, sheba tlhaloso e latelang ea "Konopo ea Panel
PANEL TS'EBETSO
Ho tobetsa le ho ts'oara
konopo bakeng sa ho feta 3s, li-LED tsohle li bonesitsoe ho kena ka har'a lamp mokhoa oa teko; Tsoela pele ho tobetsa 'me u se ke ua lokolla, ka mor'a 7s li-LED tsohle li benya (hang ka 500ms) ho kenya boemo ba boemo ba parameter, le ho lokolla konopo; Ka nako ena haeba basebelisi ba sa rera ho beha liparamente, tobetsa konopo, 'me li-LED tsohle li benya ka potlako ka makhetlo a 5 (hang ka 200ms) ho khutlela mokhoeng o tloaelehileng oa tlhahlobo. Boemong ba lamp teko, lokolla konopo le molaoli o khutlela ho mokhoa o tloaelehileng oa tlhahlobo. Kamora ho kenya boemo ba boemo ba paramente, haeba li-parameter li sa hlophisoa, molaoli o tla khutlela mokhoeng o tloaelehileng oa tlhahlobo kamora motsotso o le mong le metsotsoana e 1.
MOTS'EOA MOKHABANE
Pele ho tsohle etsa hore molaoli a kenye boemo ba boemo ba paramente, ebe o tsamaisa litlhophiso. Mekhoa ea ho beha "1 # Master", "Master" le Backup ka 'ngoe
- Tobetsa,
le ka nako e tšoanang
nako, ha 1# 1#/#2 pontshi ya matla le sesupo sa koloi se boneswa; lokolla likonopo tse tharo, ebe letšoao la koloi le matšoao a 2 # a matla a tima, 1 # pontšo ea matla e khantša, ho bolelang hore ho kentsoe "controller master setting s tatus". - Ho hatella ho ka beha maemo a 3 a phepelo ea motlakase ka selikalikoe.
- 1#Monghali: 1 # letšoao la matla lea khantša 'me 2# letšoao la matla lea tima
- 2#Monghali: 2 # letšoao la matla lea khantša 'me 1# letšoao la matla lea tima
- Backup e 'ngoe le e' ngoe: 1# po wer le 2# matšoao a matla a khantša ka nako e le 'ngoe;
- Ka mor'a ho lokisa, tobetsa , ha letšoao la matla a 1 #, letšoao la koloi le letšoao la matla a 2 # li khantša, boleng ba matla bo fetotsoeng bo bolokiloe. Mookameli o tla khutlela ho tloaelehileng s tatus ka mor'a hore li-LED tsohle li khanyetse ka makhetlo a 5 ka potlako 'me molaoli o tla sebetsa ho latela maemo a behiloeng.
HLOKOMELA
Hang ha molaoli a buletsoe, boemo ba master bo ka ahloloa ka maemo a mararo a latelang.
- Haeba lets'oao la 1# la phepelo ea motlakase le benya ka potlako ka makhetlo a mararo, le bontša hore 1# phepelo ea motlakase ke ea bohlokoa
- Haeba lets'oao la 2# la phepelo ea motlakase le benya ka potlako ka makhetlo a mararo, le bontša hore 2# phepelo ea motlakase ke ea bohlokoa
- Haeba matšoao a phepelo ea matla a 1# le 2# a khanya ka nako e le 'ngoe ka makhetlo a mararo, ke bontša hore ke bekapo e ngoe le e ngoe.
AC TSAMAISO SEBAKA
Pele ho tsohle etsa hore molaoli a kenye boemo ba boemo ba parameter, ebe o tsamaisa litlhophiso. Mekhoa ea ho beha "thapo e le 'ngoe ea mohato oa 2" wir "terata ea 3 phase 4" le "terata ea 2 phase 3"
- Tobetsa , le ka nako e ts'oanang ha 1 #/2 # pontšo ea matla le sesupo sa koloi se khantšitsoe; lokolla likonopo tse tharo, ebe letšoao la koloi le matšoao a 2 # a matla a tima, 1 # letšoao la matla lea khantša.
- Tobetsa , ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe; lokolla konopo, ebe letšoao la koloi le matšoao a matla a 1#/2# li tima ka nako e le 'ngoe, ho bolelang hore boemo ba tsamaiso ea tsamaiso ea AC bo kenngoa.
- Ho hatella e ka beha litsamaiso tse tharo tsa AC ka selikalikoe.
- Mohato o le mong oa mohala oa 2: 1 # letšoao le haufi le khantša
- terata ea 3 phase 4: 1 # sesupo se haufi, 2 # sesupo se haufi, le sesupo sa mokhoa oa matsoho se bonesa ka nako e le 'ngoe
- 2 phase 3 terata: 1 # sesupo se haufi le sesupo sa mokhoa oa matsoho se khantša ka nako e le 'ngoe;
- Kamora ho lokisa, tobetsa , ha sesupo sa matla a 1#, sesupo sa koloi, le 2#power indicator li khantša, le tsamaiso e lokisitsoeng ea AC e bolokiloe. Mookameli o tla khutlela boemong bo tloaelehileng ka ho toba ka mor'a hore li-LED tsohle li khanyetse ka makhetlo a 5 ka potlako 'me molaoli o tla sebetsa ho latela tsamaiso ea AC e behiloeng.
HLOKOMELA
Hang ha molaoli a buletsoe, tsamaiso ea eona ea AC e ka ahloloa ka maemo a mararo a latelang.
- Haeba 1# letšoao le haufi le khantša, ho bolela hore ho khethoa Single phase 2 terata system.
- Haeba 1 # haufi pontshi, manual mode indicator le 2 # close indicator khanyisa ja ka nako e le 'ngoe, ho bolela 3 phase 4 terata tsamaiso e khethiloe.
- Haeba 1 # letšoao le haufi le letšoao la mokhoa oa matsoho le khantša ka nako e le 'ngoe, ho bolela hore tsamaiso ea terata ea 2 phase 3 e khethiloe.
MOSEBETSI TRANS. PUSELETSO TSA MOSEBETSI
Pele ho tsohle, etsa hore molaoli a kenye boemo ba boemo ba paramente ebe o tsamaisa tlhophiso ea Set Auto Trans. Auto Restore/Auto Trans. Ho se Khutlise” Mehato:
- Tobetsa 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe lokolla likonopo tse peli, ebe letšoao la koloi le letšoao la matla la 2 # li tima letšoao le le leng la matla le letšoao le le leng le haufi le khantšitsoe, ho bolelang hore auto trans. auto tsosoloso ea molaoli e ka behoa.
- Tobetsa e ka seta linaha tse peli ka ho potoloha: Auto trans. ho se tsosolose ha 1# pontšo ea matla le 1# letšoao le haufi li khantšitsoe, 2# pontšo ea matla le 2# letšoao le haufi li tima. Auto t e matha. ho khutlisa koloi ha 2 # pontšo ea matla le 2 # letšoao le haufi le khantšitsoe, 1 # letšoao la matla le 1 # letšoao le haufi li tima.
- Kamora ho lokisa, tobetsa . Ha 1 #/2 # pontšo ea matla s le mochine oa likoloi o khantšitsoe ka nako e le 'ngoe, e bontša hore boleng ba parameter e behiloeng bo bolokiloe ka katleho; matšoao ohle a phanele a bonesa makhetlo a 5 kapele ho khutlela mokhoeng o tloaelehileng oa tlhahlobo. Molaoli o sebetsa ho latela boemo bo behiloeng ba auto-trans. auto reset/ho fetolela ka ho iketsa. nonrestore/
HLOKOMELA: Bulela phepelo ea motlakase ea molaoli, auto trans. auto reset/ho fetolela ka ho iketsa. nonrestore e behiloeng ke molaoli e ka ahloloa ka maemo a mabeli a latelang:
- Haeba 1# pontšo ea matla le 1# close indicator e benya ka potlako hararo ka nako e le nngwe, ke auto trans. nonrestore/
- Haeba 2# pontšo ea matla le 2# close indicator e benya ka potlako hararo ka nako e le nngwe, ke auto-trans. ho tsosolosa ka koloi
LENANEO PARAMETER LE RANGE
| Che. | Ntho | Range | Ea kamehla | Tlhaloso |
|
01 |
1 # Ttieho e Tloaelehileng |
(0-60)m |
E ka seta ka controller
potentiometer |
Ke tieho ea 1# matla a tsoang ho voltage sa tloaelehang ho voltage tloaelehileng. Ka kakaretso, ho joalo
10s. |
| 02 | 1 # Ho lieha ho sa tloaelehang | (0-60)m | 5 | Ke tieho ea 1# matla a tsoang ho voltage
tloaelehileng ho voltage sa tloaelehang. |
|
03 |
2 # Ttieho e Tloaelehileng |
(0-60)m |
E ka hlophisoa ka
potentiometer ea molaoli |
Ke tieho ea 2# matla a tsoang ho voltage
e sa tloaelehang ho voltage tloaelehileng. Ka kakaretso, ke 10s. |
| 04 | 2 # Ho lieha ho sa tloaelehang | (0-60)m | 5 | Ke tieho ea 1# matla a tsoang ho voltage
tloaelehileng ho voltage sa tloaelehang. |
| 05 | Koala tieho | (0-20)m | 5 | Pulse nako bakeng sa relay e haufi; Haeba e behiloe ho 0, ho joalo
tlhahiso e tsoelang pele. |
| 06 | Feta Phetisetso | (0-20.0)m | 0.0 | Ke tieho e eketsehileng ea tlhahiso ea relay e haufi
ka mor'a hore letšoao le haufi le amoheloe. |
|
07 |
Qala ho lieha |
(0-3600)m |
1 |
Ha voltage sa tloaeleha, ho lieha ho qala ho qala;
lets'oao la ho qala le qalisoa kamora hore tieho e felile. |
| 08 | Emisa tieho | (0-3600)m | 90 | At genset starting, haeba Mains voltagke ntho e tloaelehileng, |
| Che. | Ntho | Range | Ea kamehla | Tlhaloso |
| ho lieha ho emisa ho qala; ka mora tieho, kwala
lets'oao la ho qala la genset; |
||||
|
09 |
Sistimi ea AC |
(0-2) |
0 |
0. 3-mohato 4-terata
1. 2-mohato 3-terata 2. Mokhahlelo o le mong oa 2-terata |
| 10 | Volt e lekantsoeng | (100-240)V | 230 | Sistimi ea AC e na le matla a maholotage. |
| 11 | Rated Frequency | (50.0-60.0)Hz | 50.0 | Ho fana ka litekanyetso tsa ho lemoha ka holimo/tlase
makhetlo a mangata. |
| 12 | Over Volt E nolofalletsa | (0-1) | 1 | 0: Thibela;1: Nolofatsa |
| 13 | Ho feta Moqtage | (100-120%) | 115 | Moqtage holimo moeli; ke ntho e sa tloaelehang ha ho
voltage e fetisitse boleng bo behiloeng. |
|
14 |
Ho feta Moqtage Khutla |
(100-120%) |
113 |
Moqtage holimo moeli oa ho khutlisa boleng; ke ntho e tloaelehileng feela ha voltage oela ka tlase ho sete
boleng. |
| 15 | Tlas'a voltage | (70-100%) | 75 | Moqtage tlase moeli; ke ntho e sa tloaelehang ha ho
voltage oele ka tlase ho boleng bo behiloeng. |
|
16 |
Tlas'a Moqtage Khutla |
(70-100%) |
77 |
Moqtage theko e tlase ea ho khutlisa moeli; ke ntho e tloaelehileng feela ha voltage fetisitse sete
boleng. |
| 17 | Over Freq Noble | (0-1) | 0 | 0: Thibela;1: Nolofatsa |
| 18 | Ho Feta Hangata | (100-120%) | 110 | Moeli o kaholimo oa khafetsa; ke ntho e sa tloaelehang ha ho
maqhubu a feta boleng bo behiloeng. |
|
19 |
Ho Khutlisa Khafetsa |
(100-120%) |
104 |
Khafetsa palo e phahameng ea ho khutlisa moeli; ke ntho e tloaelehileng feela ha maqhubu a oela ka tlase
boleng bo behiloeng. |
| 20 | Tlas'a Freq nolofalletsa | (0-1) | 0 | 0: Thibela;1: Nolofatsa |
| 21 | Tlas'a Frequency | (80-100%) | 90 | Moeli o fokolang oa khafetsa; ke ntho e sa tloaelehang ha ho
maqhubu a theohile ka tlase ho boleng bo behiloeng. |
|
22 |
Tlas'a Frequency Return |
(80-100%) |
96 |
Khafetsa palo e tlase ea tekanyo ea ho khutlisa; ke ntho e tloaelehileng feela ha maqhubu a feta sete
boleng. |
| 23 | Tahlehelo ea Mokhahlelo | (0-1) | 1 | 0: Thibela;1: Nolofatsa |
| 24 | Phase Sequence
E fosahetse |
(0-1) | 0 | 0: Thibela;1: Nolofatsa |
|
25 |
Sehlopha sa Makhoba-Monghali |
(0-2) |
0 |
0. 1# Monghali;
1. 2# Monghali; 2. E mong le e bekapo |
| 26 | Auto Trans./Auto
Khutlisa |
(0-1) | 1 | 0: Auto Trans. Ho se Khutlise
1: Auto Trans. Khutlisa ka koloi |
- HLOKOMELA 1 Li-parameter tse ka holimo li hlophisoa ke software ea SmartGen PC. Khokahano ea ho kopanya lenaneo la PC: hokela RS485 interface ea SG72 le molaoli RS485
- HLOKOMELA 2 "1# Ttieho e Tloaelehileng" le "2# Ttieho e Tloaelehileng" e ka seta feela ka potentiometer e fumanang haufi le terminal ea phanele e ka morao. "1# Tieho e sa Tloaeleheng" le "2# Ho Lieha ho sa Tloaeleheng" li ka seta ka software ea PC kapa potentiometer e fumanang haufi le terminal e ka morao. AC sy stem le khetho ea bohlokoa e ka hlophisoa ka konopo ea phanele kapa software ea PC ha likarolo tse ling li ka hlophisoa ka software ea PC feela.
- ELA HLOKO 3 1# Normal Delay set value e se be ka tlase ho 1# Abnormal Delay set value, ho seng jwalo, 1# Normal Delay set value e tla qobelleha ho setwa e le 1# Abnormal Delay set value. 2# Normal Delay set value e tla be e feta kapa e lekana le 2# Abnormal Delay set value, ho seng jwalo 2# Normal Delay set value e tla qobelleha ho setwa e le 2# Abnormal Delay set value. Haeba ho sebelisoa mofuta oa ATS oa ho khanna (mohlala, SOCOMEC VS ), Koala tieho le tieho e bulehileng ha ea lokela ho ba ka tlase ho 5s; Haeba ho sebelisoa mofuta oa ATS oa ho khanna ka makenete (mohlala, SGQ N ), ho lieha ho fetisa ho tlameha ho beoa joalo ka
- ELA HLOKO 4: "Priority Select" phetolelong ea ho qetela e fetotsoe ho "Master Slave Set"; Beha likahare “0: 1# Pele; 1: 2 # Ntho ea pele; 2: HA HO Bohlokoa" li fetotsoe ho "0: 1 # Master; 1: 2 # Monghali; 2: Boloka”.
TEBELLO MOLAOLI
Ha molaoli o ntse o sebetsa, o tobetsa
senotlolo se ka seta selaoli ho Auto mode mme sesupo sa boemo ba koloi se bonesitsoe. Ho hatella konopo e ka seta molaoli ho Mokhoa oa Manual mme sesupo sa boemo ba bukana se bonesitsoe. Ka mokhoa oa auto, molaoli a ka fetisetsa mojaro ka bohona ho phepelo ea motlakase ea 1 # kapa 2 # phepelo ea motlakase. Ha e setetsoe ho Auto Transfer Auto Restore, matla a maholo a tloaelehile, 'me molaoli o tla fetisetsa ho matla a maholo ka ho fetisisa. Ha e setiloe ho Auto Transfer Non-Restore, molaoli o fetisetsa feela ho matla a bekapo, 'me phetisetso ea matla e ka laoloa feela ka letsoho. Backup e 'ngoe le e' ngoe e tšehelitsoe ka bobeli bakeng sa mehloli ea matla a mabeli. Ha matla a 1# a sa tloaeleha, 'me 2# e tloaelehile, sesebelisoa se tla fetisetsa ho 2# matla a motlakase, le ho fapana le hoo. Ha e setiloe ho Backup ka 'ngoe, molaoli a ke ke a lemoha litlhophiso tsa Auto Transfer Auto Restore.
Ho Manual mode, tobetsa senotlolo le mojaro li tla fetisetsoa ho 1 # phepelo ea motlakase; tobetsa senotlolo le mojaro li tla fetisetsoa ho phepelo ea motlakase ea 2#.
KOANETSO KHOTHA
TLHALOSO EA HO KEKETSA LITŠOANTŠISO
Lethathamo la 5 Tlhaloso ea Mosebetsi oa Terminal
| Che. | Lintho | Tlhaloso | Ela hloko |
| 1 | 1 # Koala Output | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/O tlhahiso ea puisano; e entsoe ka 16A. |
| 2 | |||
| 3 | 2 # Koala Output | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/O tlhahiso ea puisano; e entsoe ka 16A. |
| 4 | |||
| 5 | Gens Qala | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/C tlhahiso ea puisano; e entsoe ka 7A. |
| 6 | |||
| 7 | A1 |
1# AC 3-mohato 4 terata voltagkenya |
Bakeng sa mohato o le mong, hokela feela A1, N1. |
| 8 | B1 | ||
| 9 | C1 | ||
| 10 | N1 | ||
| 11 | 1# Koala Kenyo | Ho sibolloa ha 1 # ATS ho koala boemo;
lebitso la mothusi |
Connect COM e ea sebetsa. |
| 12 | 2# Koala Kenyo | Ho sibolloa ha 2 # ATS ho koala boemo; lebitso la mothusi | Connect COM e ea sebetsa. |
| 13 | COM | COM | |
| 14 | A2 |
2# AC 3-mohato 4 terata voltagkenya |
Bakeng sa mohato o le mong, hokela feela A2, N2. |
| 15 | B2 | ||
| 16 | C2 | ||
| 17 | N2 | ||
| 18 | A (+) | RS485 boema-kepe ba puisano | Ka hare, e seng e hokahane le 120Ω impedance e tsamaellanang le mohanyetsi |
| 19 | B(-) | ||
|
20 |
120Ω Mohanyetsi |
RS485 impedance e tsamaellanang le mohanyetsi |
Basebedisi ba lokela ho etsa hore sena se hokahane le terminal No. 18 e thehiloeng marang-rang a marang-rang, a sebelisetsoang ho hokahanya ka hare
120Ω mohanyetsi; |
RS485 KHOPOLO TLHALOSO
Khokahano lipakeng tsa RS485 le adaptara e tjena ka tlase:
TŠEBELETSO EA LIKHOPO
TLHOKOMELISO: The setšoantšo ke sa litšupiso feela. Wiring ea sebele e tla latela taelo ea ATS. Basebelisi ba lokela ho khetha matla a fuse a nepahetseng ho latela tšebeliso ea matla ea 'nete. Ke kopa o seke oa nka fuse e setšoantšong se kaholimo joalo ka maemo.
HLOKOMELA:Ka holimo litšoantšo li nka AC 220V voltage joalo ka mohlala ample. Haeba AC 110V voltage sebelisoa ts'ebelisong ea 'nete, ka kopo ikopanye le basebetsi ba botekgeniki ba SmartG en ho fumana mekhoa e ikhethileng ea likhoele.
KEKETSO
FUMANE MOLATO
Lethathamo la 6 Liphoso Tse Tloaelehileng
| Letšoao | Litharollo Tse ka khonehang |
| Molaoli ha a arabe ka matla. | Sheba likhokahano tsa wiring tsa taolo; |
| Genset e sebetsa ha ATS e sa fetisetsoe | Sheba ATS;
Sheba likhoele tsa khokahanyo lipakeng tsa molaoli le ATS. |
| Phoso ea ho lemoha likarolo tsa motlakase | Sheba wring ea molaoli;
Fetola boleng ba ho lemoha litekanyetso tsa motlakase; |
| Ho hloleha ha puisano ea software ea PC | Sheba boemo ba boema-kepe ba puisano le likhokahano. |
Litokomane / Lisebelisoa
 |
SmartGen HAT520NC ATS molaoli [pdf] Bukana ea Mosebelisi HaT520NC ATS Controller, HAT520NC, HAT520NC Controller, ATS Controller, Controller |
