SmartGen HAT520N ATS Controller
- SmartGen - etsa hore jenereithara ea hau e be bohlale
- SmartGen Technology Co., Ltd.
- No.28 Jinsuo Road
- Zhengzhou
- Puso ea Henan
- PR China
- Tel: +86-371-67988888/67981888/67992951
- +86-371-67981000 (ka mose ho maoatle)
- Fax: +86-371-67992952
- Web: www.smartgen.com.cn/
- www.smartgen.cn/
- Lengolo-tsoibila: sales@smartgen.cn
Litokelo tsohle li sirelelitsoe. Ha ho karolo ea khatiso ena e ka hlahisoang ka mokhoa ofe kapa ofe (ho kenyeletsoa ho etsa kopi kapa ho bolokoa ka mokhoa ofe kapa ofe ka mokhoa oa elektroniki kapa ka mokhoa o mong) ntle le tumello e ngotsoeng ea mong'a litokelo tsa litokelo tsa molao.
Likōpo tsa tumello e ngotsoeng ea mong'a litokelo tsa litokelo tsa ho hlahisa karolo efe kapa efe ea khatiso ena li lokela ho romelloa ho Smartgen Technology atereseng e ka holimo. Litšupiso life kapa life tse mabapi le mabitso a sehlahisoa a sebelisitsoeng ka har'a khatiso ena ke tsa lik'hamphani tse fapaneng. SmartGen Technology e na le tokelo ea ho fetola litaba tsa tokomane ena ntle le tsebiso pele.
Lethathamo la 1 Software Version
| Letsatsi | Phetolelo | Hlokomela |
| 2016-06-24 | 1.0 | Tokollo ea mantlha. |
| 2017-08-02 | 1.1 | Setšoantšo se fetotsoeng sa SGQ-M: se kentse letheba la terata la 1#
haufi le A1 le letheba la terata la sefapano la 2# haufi le A2. |
| 2020-04-17 | 1.2 | E kentse Auto Trans. Auto Restore/Auto Trans. Ho se Khutlise
tlhaloso ea mosebetsi. |
| 2020-06-05 | 1.3 | E kentse Auto Trans. Auto Restore/Auto Trans. Ho se Khutlise
litaelo tsa parameter bakeng sa mehato ea ho beha phanele. |
| 2022-06-15 | 1.4 | Foromo e ntlafalitsoeng ea matsoho le logo ea k'hamphani. |
FEELAVIEW
HAT520N Dual Power ATS Controller e entsoe ke motheo oa microprocessor, e ka bonang hantle 2-way 3-phase vol.tages, 2-way single phase voltages le ho etsa kahlolo e nepahetseng bakeng sa se etsahetseng se sa tloaelehang voltages (ho felloa ke matla, ho feta voltage, tlasa voltage, ka makhetlo a mangata, tlas'a maqhubu, tahlehelo ea mohato, tatellano ea mekhahlelo e fapaneng), ho laola phetoho ea ATS ka mor'a ho lieha. E loketse ho laola No Breaking ATS, 'me e na le mosebetsi oa ho fana ka letšoao la ho qala la genset ka mor'a tieho e sa tloaelehang ea tsela e le' ngoe. Ka boema-kepe ba puisano ea LINK, "Remote tse tharo" (tekanyo e hole, puisano e hole le taolo e hole) e ka phethahala.
KETSAHALO LE LITŠOANTŠISO
E na le litšobotsi tse latelang:
- Lekanya le ho hlahisa 2-way 3-phase voltage le khafetsa:
- #1 Mohala voltage (Uab, Ubc, Uca) Mokhahlelo voltage (Ua, Ub, Uc) Khafetsa Hz
- 2# Mohala voltage (Uab, Ubc, Uca) Mokhahlelo voltage (Ua, Ub, Frequency Hz
- Over/tlas'a voltage, tahlehelo ea mokhahlelo, tatellano ea mekhahlelo e khutlelang morao, ts'ebetso ea ts'ireletso e fetang/tlas'a maqhubu. Joalo ka kamehla, ts'ireletso ea tatellano ea morao-rao le ts'ireletso e fetang/tlas'a khafetsa e koetsoe; leha ho le joalo, basebelisi ba ka beha ts'ebetso ea ts'ireletso kamoo u hlokang.
- tshebetso. Joalo ka kamehla, ts'ireletso ea tatellano ea morao-rao le ts'ireletso e fetang/tlas'a khafetsa e koetsoe; leha ho le joalo, basebelisi ba ka beha ts'ebetso ea ts'ireletso kamoo u hlokang. be seta mme ntlafatso ea firmware le eona e ka phethahala.
- VoltagHo lieha ho tloaelehileng ha 1# kapa 2# ho ka hlophisoa (Range: 0s ~ 60s) le ho lieha ho qala ha Genset ho ka behoa (Range: 0s~3600s).
- VoltagHo lieha ho sa tloaelehang ha 1# kapa 2# ho ka hlophisoa (Range: 0s~60s) 'me Genset stop tieho e ka behoa (Range: 0s~3600s).
- "1 # Master", "Mutual Backup" le "2 # Master" li ka hlophisoa ka phanele e ka pele ea taolo, e le hore phepelo ea matla a 1 #, kapa phepelo e kholo ea matla a 2 #, kapa phepelo ea phepelo ea motlakase bakeng sa e mong e ka phethahala. .
- Koala lets'oao la tlhahiso le ka hlophisoa joalo ka pulse kapa tlhahiso e tsoelang pele.
- 2-way N-terata moralo o ikhethileng.
- Phetiso ea mokhoa oa Auto/Manual. Ka mokhoa oa matsoho, phetiso ea 1 # switch kapa 2 # switch ea ATS e ka sebelisoa ka konopo ea phanele.
- Li-LED tse kentsoeng phanele e ka pele li ka bonts'a boemo bo sebetsang ba ATS ka ho hlaka.
- Bokhoni ba khokahanyo ba 1# le 2# phetiso ea matla (1# CLOSE, 2# CLOSE) ke 16A AC250V, puisano e sa lefelloeng ea li-volts, e ka sebelisoang ka ho toba ho khanna switch ho fetisetsa.
- The dipholo tsa contactor bokgoni ba Genset qala relay (GENS START) ke 7A AC250V/7A DC28V, volts-free N/C contact.
- E loketse mekhoa e fapaneng ea AC (3-phase 4-wire, 2-phase 3-wire le single-phase 2-terata).
- Moralo oa modular, khetla ea polasetiki ea ABS e khutlisang lelakabe, terminal e plugable, e kentsoeng ka hare, sebopeho se kopaneng se kentsoeng habonolo.
TS'ELISO
Lethathamo la 2 Li-parameter tsa tekheniki
| Lintho | Litaba |
| Tshebetso Voltage | AC170V ~ 277V nakong ea phepelo ea matla a AC L1N1/L2N2. |
| Tšebeliso ea Matla | <2W (Mokhoa oa ho ema: <1W) |
| Mofuta oa AC Voltage Input 3P4W (ph-N) 1P2W (ph-N) 2P3W (ph-N) |
AC170V~AC277V(ph-N) AC170V~AC277V (ph-N) AC170V~AC277V(ph-N) |
| Rated Frequency | 50/60Hz |
| 1# Koala Relay Output | 16A AC250V Volts e hlahisoang mahala |
| 2# Koala Relay Output | 16A AC250V Volts e hlahisoang mahala |
| Gen Start Relay | 7A AC250V Volts e hlahisoang mahala |
| 1# Koala Kenyo | Khokahano ea COM ea sebetsa. |
| 2# Koala Kenyo | Khokahano ea COM ea sebetsa. |
| Puisano | LINK interface, MODBUS Protocol |
| Litekanyo tsa Nyeoe | 139mmx120mmx50mm |
| Phanele Cucut | 130mmx111mm |
| Mocheso oa Mosebetsi | (-25~+70)°C |
| Mongobo o sebetsang | (20~93)%RH |
| Mocheso oa polokelo | (-30~+80)°C |
| Boemo ba Tšireletso | IP55 Gasket: ha gasket e sa keneleng metsi e kentsoe lipakeng tsa molaoli le fensetere ea taolo. |
| Matla a Insulation | Kenya AC1.5kV voltage pakeng tsa matla a phahamengtage terminal le low voltage
terminal le leakage hajoale ha e fete 3mA nakong ea 1min. |
| Boima ba 'mele | 0.49kg |
TLHALOSO PANE
TŠEBELETSO PANE
TLHALOSO EA MOSEBETSI OA LESENYA
Lethathamo la 3 Tlhaloso ea Mosebetsi oa Lipontšo Tlas'a Mokhoa o Tloaelehileng oa Teko
| Ntho | Tlhaloso ea Mosebetsi |
| 1 # Letšoao la Matla | E bonesoa ha 1 # matla a tloaelehile; ho benya ha 1# boemo ba matla e sa tloaeleha; tima ha ho se na 1# matla. |
| 2 # Letšoao la Matla | E bonesoa ha 2 # matla a tloaelehile; ho benya ha 2# boemo ba matla e sa tloaeleha; tima ha ho se na 2# matla. |
| 1 # Koala Lesupa | E bonesoa ha 1 # motlakase oa motlakase oa motlakase o sebetsa ha o tima ha e koetsoe. |
| 2 # Koala Lesupa | E bonesoa ha 2 # motlakase oa motlakase oa motlakase o sebetsa ha o tima ha e koetsoe. |
| Sesupo sa Auto | E khantšoa ha molaoli a le ka har'a mode ea auto ha a ntse a tima molaoli o ka mokhoa oa matsoho. |
| Sesupo sa Bukana | E khantšoa ha molaoli a le ka mokhoa oa matsoho ha a ntse a tima molaoli o maemong a auto. |
HLOKOMELA: Bakeng sa tlhaloso ea sesupo tlas'a mokhoa oa ho beha paramethara, ka kopo sheba ho latela "Panel Operation Setting".
PANEL TŠEBELETSO
TŠEBELETSO PANE
Ho tobetsa le ho ts'oara konopo ho feta 3s, li-LED tsohle li bonesitsoe ho kena ka har'a lamp mokhoa oa teko; Tsoela pele ho tšoara 'me u se ke ua lokolla, ka mor'a hore 7s li-LED tsohle li benyetsoe (hang ka 500ms) ho kena boemong ba ho beha parameter le ho lokolloa; Haeba u sa leke ho seta li-parameter, tobetsa 'me li-LED tsohle li bonese kapele ka makhetlo a 5 (hang ka 200ms) ho khutlela mokhoeng o tloaelehileng oa tlhahlobo. Tlas'a lamp boemo ba teko, tokollo le molaoli o khutlela mokhoeng o tloaelehileng oa tlhahlobo. Kamora ho kenya tlhophiso ea paramente, haeba o sa e hlophise, molaoli o tla khutlela mokhoeng o tloaelehileng oa tlhahlobo kamora motsotso o le mong le metsotsoana e 1.
MOTS'EOA MOKHABANE
Pele ho tsohle, etsa hore molaoli a kenye boemo ba maemo a paramente, ebe o tsamaisa litlhophiso. Mekhoa ea ho seta 1# Master ”, 2# Master ”, le “Mutual Backup phepelo ea motlakase:
- Tobetsa , 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le auto in dictator li khantšitsoe; lokolla likonopo tse tharo, ebe sesupo sa koloi le matšoao a 2 # a matla a tima, 1 # pontšo ea matla e khantša, ho bolelang hore ho kentsoe "controller master setting".
- Ho hatella ho ka beha maemo a 3 a phepelo ea motlakase ka selikalikoe.
- 1# Monghali: 1# letšoao la matla lea khantša le 2# letšoao la matla le tima 2#
- Monghali: Letšoao la 2 # la matla lea khantša 'me 1# letšoao la matla lea tima
Ka bobeli - Backup : 1 # matla le 2 # matšoao a matla a khantša ka nako e le 'ngoe;
- Ka mor'a ho lokisa, tobetsa , ha 1 # pontšo ea matla, letšoao la koloi le letšoao la matla a 2 # li khantša, motlakase o hlophisitsoeng o bolokiloeng. Molaoli o tla khutlela maemong a tloaelehileng ka bo eona ka mor'a hore li-LED tsohle li bonese ka makhetlo a 5 ka potlako. Mookameli o tla sebetsa ho latela maemo a holimo
HLOKOMELA : Hang ha molaoli a se a le matla, boemo ba master bo ka ahloloa ka maemo a mararo a latelang.
- Haeba 1# sesupo sa phepelo ea motlakase se benya ka potlako ka makhetlo a mararo, se bontša 1# phepelo ea motlakase ke master
- Haeba letšoao la 2# la phepelo ea matla le bonesa ka potlako makhetlo a mararo, ho bontša hore 2# phepelo ea motlakase ke ea bohlokoa.
- Haeba matšoao a phepelo ea matla a 1# le 2# a khanya ka nako e le 'ngoe ka makhetlo a mararo, e bontša hore ke boemo ba ho boloka matla.
AC TSAMAISO SEBAKA
Ntlha ea pele
etsa hore molaoli a kenye boemo ba boemo ba paramente ebe o tsamaisa litlhophiso Mekhoa ea ho seta "terata e le 'ngoe ea mohato oa 2" "terata ea 3 phase 4" le "terata ea 2 phase 3"
- Tobetsa, 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe, lokolla likonopo tse tharo, ebe letšoao la koloi le matšoao a 2 # a matla a tima, 1 # pontšo ea matla e khantša.
- Tobetsa , ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe, lokolla konopo, ebe letšoao la koloi le matšoao a matla a 1#/2# li tima ka nako e le 'ngoe, ho bolelang hore tsamaiso ea AC e ka behoa.
- Ho tobetsa ho ka seta litsamaiso tse tharo tsa AC. Single phase 2 terata : 1 # sesupo se haufi se khantša 3phase 4 terata 1 # close indicator, 2 # close indicator and manual mode indicator r lluminately 2 phase 3 terata : 1 # close indicator and manual mode indicator lighting the same time.
- Ka mor'a ho lokisa, tobetsa , ha letšoao la 1 # la matla, letšoao la koloi le letšoao la matla la 2 # li khantša, tlhophiso e fetotsoeng ea tsamaiso ea AC e bolokiloe. Molaoli o tla khutlela maemong a tloaelehileng ka bo eona ka mor'a hore li-LED tsohle li bonese ka makhetlo a 5 ka potlako. Molaoli o tla sebetsa ho latela sistimi e behiloeng ea AC.
HLOKOMELA: Hang ha molaoli a se a le matla, sistimi ea eona ea AC e ka ahloloa ho latela maemo a mararo a latelang.
- Haeba 1 # letšoao le haufi le khantša ho bolela hore ho khethoa Single phase 2 terata system.
- Haeba 1 # letšoao le haufi, letšoao la mokhoa oa letsoho le 2 # letšoao le haufi le khantša ka nako e le 'ngoe ho bolela hore tsamaiso ea terata ea 3 phase 4 e khethiloe.
- Haeba 1 # koala Indica tor le manual mode indicator khantša ka nako e le 'ngoe ho bolela hore tsamaiso ea terata ea 2 phase 3 e khethiloe.
tieho TS'ELISO
Ho fetola "1# power normal delay" potentiometer (fumana d haufi le theminale e ka morao) e ka beha tieho ea tlhahiso ka mor'a 1# phepelo ea motlakase e tloaelehile. Ho fetola "2# power normal delay" potentiometer (fumana d haufi le terminal e ka morao) e ka beha tieho ea tlhahiso ka mor'a hore phepelo ea motlakase ea 2 # e tloaelehe. Pele ho tsohle etsa hore molaoli a kenye boemo ba boemo ba paramente, ebe o tsamaisa tlhophiso. Ho beha Mekhoa ea "1# tieho e sa tloaelehang ea matla" le "2# tieho e sa tloaelehang ea matla":
- Tobetsa 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe, lokolla likonopo tse peli, ebe letšoao la koloi le matšoao a matla a 1#/2# li tima ka nako e le' ngoe ho bolelang hore nako ea ho lieha ea molaoli e ka tima. behoa. 1# tieho e sa tloaelehang ea matla fetola "1# Ho lieha ho Tloaelehileng ha Matla" potentiometer 2#tieho e sa tloaelehang ea matla: lokisa "2#Power Normal Delay" potentiometer
- Kamora ho lokisa tieho, tobetsa , ha 1#/2# pontshi le sesupo sa othomathike se boneswa ka nako e le nngwe, boleng bo fetotsweng bo bolokilwe. Molaoli o tla khutlela maemong a tloaelehileng ka bo eona ka mor'a hore li-LED tsohle li bonese ka makhetlo a 5 ka potlako. Molaoli o tla sebetsa ho latela litekanyetso tse behiloeng tsa ho lieha.
HLOKOMELA 1# Normal Delay set value e tlameha ho se be ka tlase ho 1# Abnormal Delay, ho seng joalo, 1# Normal Delay set value e tla qobelloa ho seta e le 1# Abnormal Delay set value. 2# Tloaelehileng Delay set value e tlameha ho se be ka tlase ho 2# Abnormal Delay, ho seng joalo, 2# Normal Delay set value e tla qobelloa ho seta e le 2# Abnormal Delay set value.
PUSELETSA FEKE LITLHAKISO
Pele ho tsohle etsa hore molaoli a kenye boemo ba boemo ba paramente ebe o tsamaisa tlhophiso
- Tobetsa 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe, lokolla likonopo tse peli, ebe letšoao la koloi le matšoao a matla a 1#/2# li tima ka nako e le' ngoe ho bolelang hore boleng ba ho lieha ha kamehla ba molaoli. e ka behoa.
- Tobetsa , ha 1#/2# sesupo sa matla le sesupo sa koloi se bonesoa ka nako e le 'ngoe, kamehla feme e khutliselitsoe. Molaoli o tla khutlela maemong a tloaelehileng ka bo eona ka mor'a hore li-LED tsohle li bonese ka makhetlo a 5 ka potlako. Molaoli o tla sebetsa ho latela litekanyetso tse behiloeng tsa ho lieha.
HLOKOMELA Ka tloaelo, 1# le 2# tieho e sa tloaelehang ke 5s le genset stop tieho ke 90s.
MOSEBETSI TRANS. PUSELETSO TSA MOSEBETSI
Pele ho tsohle etsa hore molaoli a kenye boemo ba boemo ba paramente ebe o tsamaisa tlhophiso. Beha Auto Trans. Khutlisa Auto ", Auto Trans. Mehato ea Non Restore:
- Tobetsa 'me ka nako e ts'oanang, ha 1#/2# pontšo ea matla le sesupo sa koloi se khantšitsoe, lokolla likonopo tse peli, ebe letšoao la koloi le letšoao la matla la 2 # lia tima, 1 # letšoao la matla le 1 # letšoao le haufi li khantšitsoe. , e bolelang auto trans. auto tsosoloso ea molaoli e ka behoa.
- Tobetsa e ka seta lipalo-palo tse peli: Auto trans. e sa khutlisetsoeng ha 1# pontšo ea matla le 1# letšoao le haufi le khantšitsoe, 2# pontšo ea matla le 2# letšoao le haufi li tima Auto trans. tsosolosa ka koloi ha 2#
sesupo sa matla le sesupo sa 2# se haufi se bonesitsoe, 1# sesupo sa matla le 1# sesupo se haufi se tingoe. - Kamora ho lokisa , tobetsa . Ha 1 #/2 # pontšo ea matla s le mochine oa likoloi o khantšitsoe ka nako e le 'ngoe, e bontša hore boleng ba parameter e behiloeng bo bolokiloe ka katleho; matšoao ohle a phanele a bonesa makhetlo a 5 kapele ho khutlela mokhoeng o tloaelehileng oa tlhahlobo. Molaoli o sebetsa ho latela boemo bo behiloeng ba auto trans. auto reset/ho fetolela ka ho iketsa. e seng botjha lebenkele.
HLOKOMELA: Bulela phepelo ea motlakase ea molaoli, auto trans. auto reset/ho fetolela ka ho iketsa. e seng tsosoloso e behiloeng ke molaoli e ka ahloloa ka ho latela maemo a mabeli Haeba 1 # pontšo ea matla le 1 # letšoao le haufi le f
hlaba kapele ka makhetlo a mararo ka nako e le 'ngoe, ke auto trans. e sa busetseng. Haeba 2# pontšo ea matla le 2# close indicator e benya ka potlako hararo ka nako e le nngwe, ke auto trans. ho tsosolosa ka ho iketsa
TIISETSO PARAMETER
Letlapa la 4Parameter Configuration
| Che. | Ntho | Range | Ea kamehla | Tlhaloso |
| 01 | 1 # Ttieho e Tloaelehileng | (0-60)m | E ka hlophisoa ka molaoli potentiometer |
Ke tieho ea 1# matla a tsoang ho voltage e sa tloaelehang ho voltage tloaelehileng. Ka kakaretso, ke 10s. |
| 02 | 1 # Ho lieha ho sa tloaelehang | (0-60)m | 5 | Ke tieho ea 1# matla a tsoang ho voltage tloaelehileng ho voltage sa tloaelehang. |
| 03 | 2 # Ttieho e Tloaelehileng | (0-60)m | E ka seta ka controller potentiometer |
Ke tieho ea 2# matla a tsoang ho voltage sa tloaelehang ho voltage tloaelehileng. Ka kakaretso, ho joalo 10s. |
| 04 | 2 # Ho lieha ho sa tloaelehang | (0-60)m | 5 | Ke tieho ea 2# matla a tsoang ho voltage tloaelehileng ho voltage sa tloaelehang. |
| 05 | Koala tieho | (0-20)m | 5 | Ho koala sekhahla sa phalliso. Haeba e behiloe joalo ka zero, ho joalo tlhahiso e tsoelang pele. |
| 06 | Feta Phetisetso | (0-20.0)m | 0.0 | Ke tieho e tsoelang pele ea tlhahiso ea ho koala phetiso ka mora hore letshwao la ho kwala le amohetswe. |
|
07 |
Qala ho lieha |
(0-3600)m |
1 |
Ha voltage sa tloaeleha, ho lieha ho qala ho qala; letšoao la ho qala le qalisoa ka mor'a hore tieho e be le feletsoe ke nako. |
|
08 |
Emisa tieho |
(0-3600)m |
90 |
Ha o qala, haeba voltage ke ntho e tloaelehileng, emisa tieho e qala; letšoao la ho emisa le qalisoa ka mor'a hore tieho e felile. |
|
09 |
Sistimi ea AC |
(0-2) |
0 |
0. 3-mohato 4 lithapo 1. 2-mohato 3 lithapo 2. Mohato o le mong oa 2 terata |
| 10 | Volt e lekantsoeng | (100-240)V | 230 | Sistimi ea AC e na le matla a maholotage. |
| 11 | Rated Frequency | (50.0-60.0)Hz | 50.0 | Ho fana ka maemo a ho lemoha maqhubu a fetang/tlasa. |
| 12 | Over Volt E nolofalletsa | (0-1) | 1 | 0: Tlosa; 1: Nolofatsa |
| 13 | Ho feta Moqtage | (100-120%) | 115 | Moqtage holimo moeli; ke ntho e sa tloaelehang ha thevoltage e fetisitse boleng bo behiloeng. |
|
14 |
Ho feta Moqtage Khutla |
(100-120%) |
113 |
Moqtage holimo moeli oa ho khutlisa boleng; ho tloaelehile
feela ha voltage oele ka tlase ho boleng bo behiloeng. |
| 15 | Tlas'a voltage | (70-100%) | 75 | Moqtage tlase moeli; ke ntho e sa tloaelehang ha ho voltage oele ka tlase ho boleng bo behiloeng. |
|
16 |
Tlas'a Voltage Khutla | (70-100%) | 77 | Moqtage theko e tlase ea ho khutlisa moeli; ke ntho e tloaelehileng feela ha voltage fetisitse sete boleng. |
| 17 | Over Freq Noble | (0-1) | 0 | 0: Tlosa; 1: Nolofatsa |
| 18 | Ho Feta Hangata | (100-120%) | 110 | Moeli o kaholimo oa khafetsa; ke ntho e sa tloaelehang ha maqhubu a feta boleng bo behiloeng. |
| Che. | Ntho | Range | Ea kamehla | Tlhaloso |
|
19 |
Ho Khutlisa Khafetsa |
(100-120%) |
104 |
Khafetsa palo e phahameng ea ho khutlisa moeli; ho joalo e tloaelehileng feela ha maqhubu a oela ka tlase ho boleng bo behiloeng. |
| 20 | Tlas'a Freq nolofalletsa | (0-1) | 0 | 0: Tlosa; 1: Nolofatsa |
| 21 | Tlas'a Frequency | (80-100%) | 90 | Moeli o fokolang oa khafetsa; ke ntho e sa tloaelehang ha ho maqhubu a theohile ka tlase ho boleng bo behiloeng. |
|
22 |
Tlas'a Frequency Kgutla |
(80-100%) | 96 | Khafetsa palo e tlase ea ho khutlisa moeli; ho tloaelehile ha feela maqhubu a na le e fetisitse boleng bo behiloeng. |
| 23 | Tahlehelo ea Mokhahlelo | (0-1) | 1 | 0: Tlosa; 1: Nolofatsa |
| 24 | Phase Sequence
E fosahetse |
(0-1) | 0 | 0: Tlosa; 1: Nolofatsa |
|
25 |
Sehlopha sa Makhoba-Monghali | (0-2) | 0 | 0. 1# Monghali; 1. 2# Monghali; 2. Backup Mutual. |
| 26 | Auto Trans. Auto Khutlisa Set |
(0-1) | 1 | 0: Auto Trans. Ho se Khutlise; 1: Auto Trans. Khutlisa ka koloi. |
- HLOKOMELA1: Liparamente tse ka holimo li hlophisitsoe ke software ea SmartGen PC. Khokahano ea lenaneo la PC: LINK interface ea SG72 e hokahana le sebopeho sa taolo.
- HLOKOMELA2: “1# Tloaeleho ea ho lieha” le “2# Tloaelo e Tloaelehileng” e ka seta feela ka potentiometer e leng haufi le theminale e ka morao ea phanele. "1# Tieho e sa Tloaelehang" le "2# Ho Lieha ho sa Tloaeleheng" li ka seta ka software ea PC kapa potentiometer e haufi le terminal ea phanele e ka morao. Sistimi ea AC le sete ea makhoba a master e ka hlophisoa ka konopo ea konopo kapa software ea PC. 'Me likarolo tse ling li ka hlophisoa ka software ea PC feela.
- HLOKOMELA3: 1# Normal Delay set value e tlameha ho se be ka tlase ho 1# Abnormal Delay, ho seng joalo, 1# Normal Delay set value e tla qobelloa ho seta e le 1# Abnormal Delay set value. 2# Tloaelehileng Delay set value e tlameha ho se be ka tlase ho 2# Abnormal Delay, ho seng joalo, 2# Normal Delay set value e tla qobelloa ho seta e le 2# Abnormal Delay set value. Haeba ho sebelisoa mofuta oa ho khanna koloi oa ATS (mohlala, SOCOMEC VS), nako ea ho lieha ha koloi le Open e tlameha ho ba ka tlase ho 5s; Haeba ho sebelisoa mofuta oa ATS (mohlala, SGQ-N) oa ho khanna ka makenete, ho lieha ho fetelletseng ho tlameha ho beoa joalo ka 0.
- TLHOKOMELISO4: “Priority Select" phetolelong ea ho qetela e fetotsoe ho "Master-Slave Set"; Beha likahare “0: 1# Pele; 1: 2 # Ntho ea pele; 2:
No Priority" li fetotsoe ho "0: 1 # Master; 1: 2 # Monghali; 2: Backup e kopanetsoeng".
TEBELLO MOLAOLI
Ha molaoli o ntse o sebetsa, tobetsa 'me sesupo sa koloi se bonesitsoe, molaoli o fetohela boemong ba koloi; Tobetsa, sesupo sa boemo ba letsoho se bonesitsoe, 'me molaoli o fetohela ho boemo ba letsoho. Ka Auto mode, molaoli a ka fetisetsa mojaro ka bohona ho matla a 1 # kapa 2 # matla; ha Auto Trans, Auto Restore e setiloe, matla a maholo a tloaelehile, 'me molaoli o tla fetisetsa ho matla a maholo ka pele; Ha Auto Trans. Non Restore e setiloe, molaoli o tla fetisetsa feela ho matla a bekapo, 'me matla a maholo a ka laoloa ka letsoho feela. Backup e 'ngoe le e' ngoe ke ea matla a mabeli ho ba bekapo; Ha matla a 1# a sa tloaeleha, 'me matla a 2# a tloaelehile, switjha e tla fetela ho phepelo ea motlakase ea 2#, 'me ka tsela e fapaneng. Ha e setetsoe ho Backup ka 'ngoe, molaoli a ke ke a lemoha Auto Trans. Setting ea ho khutlisa ka boits'oaro. Ka mokhoa oa Manual, tobetsa konopo, mojaro o tla fetisetsoa ho phepelo ea motlakase ea 1#; tobetsa konopo, mojaro o tla fetisetsoa ho 2#phepelo ea motlakase.
TLHALOSO EA HO KEKETSA LITŠOANTŠISO
MORAKO MANE
TLHALOSO EA TERMINAL
Lethathamo la 5 Tlhaloso ea Terminal
| Che. | Lintho | Tlhaloso | Ela hloko |
| 1 | 1 # Koala Output | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/O tlhahiso ea puisano; e entsoe ka 16A. |
| 2 | |||
| 3 | 2 # Koala Output | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/O tlhahiso ea puisano; e entsoe ka 16A. |
| 4 | |||
| 5 | Gens Qala | Sephetho sa khokahanyo e sa lefelloeng ea Volt | N/O tlhahiso ea puisano; e entsoe ka 7A. |
| 6 | |||
| 7 | A1 |
1# AC 3-mohato 4 terata voltagkenya |
Bakeng sa mohato o le mong, hokela feela A1, N1. |
| 8 | B1 | ||
| 9 | C1 | ||
| 10 | N1 | ||
| 11 | 1# Koala Kenyo | Ho sibolloa ha 1 # ATS ho koala boemo;
lebitso la mothusi |
Connect COM e ea sebetsa. |
| 12 | 2# Koala Kenyo | Ho sibolloa ha 2 # ATS ho koala boemo;
lebitso la mothusi |
Connect COM e ea sebetsa. |
| 13 | COM | COM | |
| 14 | A2 |
2# AC 3-mohato 4 terata voltagkenya |
Bakeng sa mohato o le mong, hokela feela A2, N2. |
| 15 | B2 | ||
| 16 | C2 | ||
| 17 | N2 | ||
| LINK | Boema-kepe ba Khokahano | Buisana le PC/Lenaneo
nchafatsa |
TŠEBELETSO EA SEBELISA
HLOKOMELA: Setšoantšo ke sa litšupiso feela. Wiring ea sebele e tla latela taelo ea ATS. Basebelisi ba lokela ho khetha bokhoni bo nepahetseng ba fuse ho latela tšebeliso ea matla ea 'nete.
HLOKOMELA: Litšoantšo tse ka holimo nka AC 220V voltage joalo ka mohlalaample. Haeba AC 110V voltage sebelisoa ts'ebelisong ea 'nete, ka kopo ikopanye le basebetsi ba botekgeniki ba SmartGen ho fumana mekhoa e ikhethileng ea likhoele.
KEKETSO
FUMANE MOLATO
Lethathamo la 6 Liphoso Tse Tloaelehileng
| Letšoao | Litharollo Tse ka khonehang |
| Molaoli ha a arabe ka matla | Sheba libeteri tse qalang. |
|
ATS ha e fetisetsoe |
Sheba ATS;
Sheba likhoele tsa khokahanyo lipakeng tsa molaoli le ATS. |
| Phoso ea ho lemoha likarolo tsa motlakase | Sheba wring ea molaoli;
Fetola boleng ba ho bona liparamente tsa motlakase |
| Ho hloleha ha puisano ea software ea PC | Sheba boemo ba boema-kepe ba puisano le likhokahano. |
Litokomane / Lisebelisoa
 |
SmartGen HAT520N ATS Controller [pdf] Bukana ea Mosebelisi HAT520N, ATS Controller, HAT520N ATS Controller, Controller |
