SKYDANCE D4-XE 4 Channel Constant Voltage DMX512 le RDM Decoder

Taelo

Nomoro ea Mohlala: D4-XE
RDM/Stand-alone function/Two PWM frequency/Linear or logarithmic dimming/Numeric display

Likaroloana

• Latela melaoana e tloaelehileng ea DMX512.
• Pontšo ea linomoro tsa dijithale, seta aterese ea ho qala ea DMX ka likonopo.
• Mosebetsi oa RDM o ka lemoha puisano lipakeng tsa
  • DMX master le decoder. Bakeng sa mohlalaample,
  • Aterese ea DMX decoder e ka hlophisoa ke master console ea DMX.
• 1/2/4 tlhahiso ea mocha oa DMX e ka khethoang.
• PWM frequency 2000/500Hz selectable.
• Logarithmic kapa linear dimming curve e ka khethoa.
• Mokhoa o ikemetseng oa RGB/RGBW le 4 channel dimmer mode e ka khethoang, e laoloang ke likonopo tse nang le mananeo a hahiloeng, ho e-na le letšoao la DMX.
• Terminal e tala, XLR3 le RJ45 port DMX signal input.
• Ho chesa haholo / Tšireletso ea potoloho e khuts'oane, fola ka bo eona.

Tekheniki Parameters

Kenyeletso le Sephetho
Keletso voltage	12-36VDC
Kenya hona joale	32.5A
Sephetho voltage	4 x (12-36)VDC
Sephetho sa hajoale	4CH,8A/CH
Matla a hlahisang	4 x (96-288)W
Mofuta oa tlhahiso	Kamehla voltage

Tšireletseho le EMC
EMC e tloaelehileng (EMC)	EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015
Tekanyetso ea polokeho(LVD)	EN 61347-1:2015 EN 61347-2-11:2015
Setifikeiti	CE, EMC, LVD

Tikoloho
Mocheso oa ts'ebetso	Ta: -30 OC ~ +55 OC
Thempereichara ea boholo (Boholo.)	T c: +85OC
Lintlha tsa IP	IP20

Tiisetso le Tshireletso
Tiisetso	5 lilemo
Tshireletso	Khutlisa polarity Mocheso o feteletseng Potoloho e khutšoanyane

Boima ba 'mele
Boima bo kahare	0.388kg
Boima bo felletseng	0.426kg

Mechanical Structures le Installations

Boemo

Setšoantšo sa Wiring

Hlokomela:

1. Letšoao la DMX ampLifier ea hlokahala haeba ho hoketsoe li-decoder tse fetang 32, kapa ho sebelisoa mats'oao a malelele amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele.
2. Haeba phello ea ho khutlisa e hlaha ka lebaka la mohala o molelele oa lets'oao kapa boleng bo bobe ba mohala, ka kopo leka ho hokela 0.25W 90- 120Ω sehanyetsi sa terminal qetellong ea mohala o mong le o mong oa lets'oao oa DMX.

Tshebetso

Litlhophiso tsa parameter ea sistimi

• Tobetsa nako e telele M le ◀ konopo ka nako e le 'ngoe bakeng sa 2s, lokisetsa parameter ea tsamaiso ea ho seta: mokhoa oa ho khetholla, maqhubu a PWM a tsoang, lekhalo le khanyang, skrine e se nang letho. tobetsa konopo ea M ho fetola ntho e mene.
• Mokhoa oa ho khetha: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 1/2/4 mokhoa oa ho khetholla mocha (“d-1″,”d-2” kapa “d-4”). Ha e behiloe e le 1 channel decode, decoder e nka feela 1 DMX address, 'me mecha e mene e hlahisa khanya e tšoanang ea aterese ena ea DMX.
• Phatlalatso ea PWM: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 500Hz(“FL”) kapa 2KHz(“FH”).
  Maqhubu a phahameng a PWM, a tla baka molumo o tlase oa hona joale, lerata le phahameng la matla, empa a loketse haholoanyane khamera (Ha ho li-fickers bakeng sa video).
• Mokokotlo o khanyang: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(“CL”) kapa logarithmic curve(“CE”).
• Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha ("bon") kapa tima ("boF") skrineng se se nang letho.
• Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.

Mokhoa oa DMX

• Tobetsa hakhutšoanyane M key, ha o bonts'a 001~999, kenya mokhoa oa DMX.
• Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001~999), tobetsa nako e telele ho lokisa kapele.
• Haeba ho na le kenyo ya letshwao la DMX, e tla kena mokgweng wa DMX ka boyona.
• DMX Dimming: Decoder e 'ngoe le e 'ngoe ea D4-XE DMX e na le aterese ea 4 DMX ha e hokela khomphutha ea DMX.
  Bakeng sa mohlalaample, aterese ea ho qala e sa fetoheng ke 1, kamano ea bona e tsamaellanang ka foromo:

DMX Console	Sephetho sa Decoder ea DMX
CH1 0-255	CH1 PWM 0-100% (LED R)
CH2 0-255	CH2 PWM 0-100% (LED G)
CH3 0-255	CH3 PWM 0-100% (LED B)
CH4 0-255	CH4 PWM 0-100% (LED W)

Mokhoa o ikemetseng oa RGB/RGBW

• Kenya mokhoa o ikemetseng oa RGB/RGBW ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
• Tobetsa hakhutšoanyane M konopo, ha o bonts'a P01~P30, kenya mokhoa o ikemetseng oa RGB/RGBW.
• Tobetsa ◀ kapa ▶ konopo ho fetola dynamic mode number(P01~P30).
• Mokhoa o mong le o mong o ka fetola lebelo le khanya.
  • Tobetsa nako e telele senotlolo sa M bakeng sa 2s, lokisetsa lebelo la mokhoa oa ho seta, khanya, khanya ea kanale ea W.
  • Tobetsa M konopo ho fetola ntho tse tharo.
  • Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
  • Lebelo la mokhoa: 1-10 lebelo la lebelo(S-1, S-9, SF).
  • Khanya ea mokhoa: Khanya ea boemo ba 1-10(b-1, b-9, bF).
  • Khanya ea kanale ea W: khanya ea boemo ba 0-255 (400-4FF).
  • Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta.

Boemo ba dimmer bo ikemetseng

• Kenya mokhoa o ikemetseng oa dimmer ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
• Tobetsa ka nako e khutšoanyane konopo ea M, ha u hlahisa L-1~L-8, kenya mokhoa oa dimmer o ikemetseng.
• Tobetsa ◀ kapa ▶ konopo ho fetola nomoro ea "dimmer mode"(L-1~L-8).
• Mokhoa o mong le o mong oa dimmer o ka fetola khanya e 'ngoe le e 'ngoe ka boikemelo.
  • Tobetsa nako e telele konopo ea M bakeng sa 2s, lokisetsa ho seta khanya ea kanale e mene.
  • Tobetsa hakhutšoanyane M konopo ho fetola kanale e mene(100~1FF, 200~2FF, 300~3FF, 400~4FF). Tobetsa ◀ kapa ▶ konopo ho seta boleng ba khanya ea kanale ka 'ngoe.
  • Tobetsa nako e telele konopo ea M bakeng sa 2s, kapa timeout 10s, khaotsa ho seta.

Khutlisa paramethara ea kamehla ea feme

• Tobetsa nako e telele ◀ le ▶ konopo bakeng sa 2s, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
• Factory default parameter: DMX decode mode, DMX decode start address ke 1, four channel decode, high PWM frequency output, logarithmic brightness curve, RGB mode number ke 1, dimmer mode number ke 1, tima skrineng se se nang letho.

Lenane la ho fetola mokhoa oa RGB

Che.	Lebitso	Che.	Lebitso	Che.	Lebitso
P01	Bofubelu bo tsitsitseng	P11	Green strobe	P21	Bosehla bo bofubelu bo boreleli
P02	Botala bo tsitsitseng	P12	Blue strobe	P22	'Cyan e tala e boreleli
P03	Putsoa e tsitsitseng	P13	White strobe	P23	Bopherese bo boputsoa bo boreleli
P04	Bosehla bo tsitsitseng	P14	RGB strobe	P24	Botala bo bosoeu bo boreleli
P05	Cyan e sa fetoheng	P15	7 mebala strobe	P25	RGB+W e bonolo
P06	Bopherese bo tsitsitseng	P16	Bofubelu bo nyamela ka hare le ka ntle	P26	RGBW e bonolo
P07	Bosoeu bo tsitsitseng	P17	Botala bo nyamela ka hare le ka ntle	P27	RGBY e bonolo
P08	RGB e tlole	P18	Boputsoa bo fifala kahare le kantle	P28	Bopherese bo bosehla ba cyan bo boreleli
P09	7 tlola ka mebala	P19	Bosoeu bo fela ka hare le ka ntle	P29	RGB e bonolo
P10	Strobe e khubelu	P20	RGBW e nyamela kahare le kantle	P30	6 mmala o boreleli

Setlhophiso sa curve e nyenyefatsang

Tlhahlobo e sa sebetseng le ho rarolla mathata

Ho se sebetse hantle	Lisosa	Ho batle phoso
Ha ho khanya	1. Ha ho matla. 2. Khokahano e fosahetseng kapa e sa sireletsehang.	1. Hlahloba matla. 2. Sheba khokahano.
Mmala o fosahetseng	1. Khokahano e fosahetseng ea lithapo tsa R/G/B/W. 2. Phoso ea aterese ea DMX.	1. Hokela hape lithapo tsa R/G/B/W. 2. Beha aterese e nepahetseng ea decode.
Ho se leka-lekane pakeng tsa ka pele le ka morao, ka voltaglerotholi	1. Mohala o tsoang ho o molelele haholo. 2. Wire bophara e nyenyane haholo. 3. Tlala e fetang matla a phepelo ea motlakase. 4. Moroalo o fetang matla a taolo.	1. Fokotsa phepelo ea cable kapa loop. 2. Fetola terata e pharaletseng. 3. Kenya sebaka sa phepelo e phahameng ea matla. 4. Eketsa motlakase oa matla.

 

Litokomane / Lisebelisoa

	SKYDANCE D4-XE 4 Channel Constant Voltage DMX512 le RDM Decoder [pdf] Buka ea Taelo D4-XE, D4-XE 4 Channel Constant Voltage DMX512 le RDM Decoder, 4 Channel Constant Voltage DMX512 le RDM Decoder, Constant Voltage DMX512 le RDM Decoder, DMX512 le RDM Decoder, RDM Decoder, Decoder
	Skydance D4-XE 4 Channel Constant Voltage DMX512 le RDM Decoder [pdf] Bukana ea Mosebelisi D4-XE, D4-XE 4 Channel Constant Voltage DMX512 and RDM Decoder, D4-XE, 4 Channel Constant Voltage DMX512 le RDM Decoder, Moqtage DMX512 and RDM Decoder, RDM Decoder, Decoder

Litšupiso

• Bukana ea Mosebelisi