SKYDANCE D4-P 4 Channel Constant Voltage DMX512 & RDM Decoder

Likaroloana

• Latela melaoana e tloaelehileng ea DMX512.
• Pontšo ea linomoro tsa dijithale, seta aterese ea ho qala ea DMX ka likonopo.
• Ts'ebetso ea RDM e ka khona ho fumana puisano lipakeng tsa master ea DMX le decoder. Bakeng sa mohlalaample, aterese ea DMX decoder e ka hlophisoa ke master console ea DMX.
• 1/2/4 tlhahiso ea mocha oa DMX e ka khethoang.
• 16bit (maemo a 65536) /8bit (maemo a 256) boemo bo bohlooho bo ka khethoang.
• PWM frequency 250/500/1000/2000/4000/8000/16000Hz selectable.
• Logarithmic kapa linear dimming curve e ka khethoa.
• Mocheso o fetelletseng / boima bo feteletseng / Ts'ireletso ea potoloho e khuts'oane, hlaphoheloa ka bohona.
• D4-P e na le likou tsa matšoao a Green terminal DMX, D4-E e na le likou tsa matšoao tsa RJ-45 DMX.

Tekheniki Parameters

Kenyeletso le Sephetho
Keletso voltage	12-48VDC
Kenya hona joale	32.5A
Sephetho voltage	4 x (12-48)VDC
Sephetho sa hajoale	4×8A@12/24V 4×6A@36/48V
Matla a hlahisang	4×96W @12V 4×192W@24V 4×216W@36V 4×288W@48V
Mofuta oa tlhahiso	Kamehla voltage

Tšireletseho le EMC
EMC e tloaelehileng (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Tekanyetso ea polokeho(LVD)	EN 62368-1:2020+A11:2020
Setifikeiti	CE, EMC, LVD Tikoloho Mocheso oa ts'ebetso Ta: -30 OC ~ +55 OC Thempereichara ea boholo (Boholo.) T c: +75OC Lintlha tsa IP IP20

Tiisetso le Tshireletso
Tiisetso	5 lilemo
Tshireletso	Khutlisa polarity Mocheso o Felletseng ka Mojaro Potoloho e khuts'oane

Boima ba 'mele
Boima bo kahare	276g
Boima bo felletseng	295g

Mechanical Structures le Installations

LIEKETSENG

Setšoantšo sa Wiring

Hlokomela:

1. Letšoao la DMX ampLifier ea hlokahala haeba ho hoketsoe li-decoder tse fetang 32, kapa ho sebelisoa mats'oao a malelele amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele.
2. Haeba phello ea ho khutlisa e hlaha ka lebaka la mohala o molelele oa lets'oao kapa boleng bo bobe ba mohala, ka kopo leka ho hokela 0.25W 90- 120Ω sehanyetsi sa terminal qetellong ea mohala o mong le o mong oa lets'oao oa DMX.

Tshebetso

Litlhophiso tsa parameter ea sistimi

• Tobetsa nako e telele M le ◀ konopo ka nako e le 'ngoe bakeng sa 2s, lokisetsa paramethara ea tsamaiso ea ho seta: mokhoa oa ho khetholla, boemo ba bohlooho, maqhubu a PWM a tsoang, lekhalo le khanyang, boemo ba tlhahiso ea kamehla, skrine e se nang letho. tobetsa konopo ea M ho fetola ntho e tšeletseng.
• Mokhoa oa ho khetha: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 1/2/4 mokhoa oa ho khetholla mocha (“d-1″,”d-2” kapa “d-4”). Ha e behiloe e le 1 channel decode, decoder e nka feela 1 DMX address, 'me mecha e mene e hlahisa khanya e tšoanang ea aterese ena ea DMX.
• Boemo bo bohlooho: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha 8bit(“b08”) kapa 16 bit(“b16”). khetha 16 bit haeba DMX master e tšehetsa 16 bit.
• Khafetsa ea PWM: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha 250Hz(“F02”), 500Hz(“F05”), 1000Hz(“F10”), 2000Hz(“F20”), 4000Hz(“F40”), 8000Hz F80”) kapa 16000Hz(“F16”).
  Maqhubu a phahameng a PWM, a tla baka tlhahiso e tlase ea hona joale, lerata le phahameng la matla, empa le loketse kh'amera (Ha ho li-ickers tsa video).
• Mokokotlo o khanyang: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(“CL”) kapa logarithmic curve(“CE”).
• Boemo ba tlhahiso ea kamehla: tobetsa ◀ kapa ▶ konopo ho fetola boemo ba kamehla ba 0-100% ("d00" ho "dFF" ) ha ho se na letšoao la ho kenya la DMX.
• Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha ("bon") kapa tima ("boF") skrineng se se nang letho.
• Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.

Mokhoa oa DMX

• Tobetsa hakhutšoanyane M key, ha o bonts'a 001~512, kenya mokhoa oa DMX.
• Tobetsa ◀ kapa ▶ konopo ho fetola aterese ea ho qala ea DMX decode(001~512), tobetsa nako e telele ho lokisa kapele.
• Haeba ho na le kenyo ya letshwao la DMX, e tla kena mokgweng wa DMX ka boyona.
• DMX Dimming: Decoder e 'ngoe le e' ngoe ea D4-P/D4-E DMX e nka aterese ea 4 DMX ha e hokela khomphutha ea DMX. Bakeng sa mohlalaample, aterese ea ho qala e sa fetoheng ke 1, kamano ea bona e tsamaellanang ka foromo:

DMX Console	Sephetho sa Decoder ea DMX
CH1 0-255	CH1 PWM 0-100% (LED R)
CH2 0-255	CH2 PWM 0-100% (LED G)
CH3 0-255	CH3 PWM 0-100% (LED B)
CH4 0-255	CH4 PWM 0-100% (LED W)

Mokhoa oa ho itlhahloba

• Kenya mokhoa oa ho itlhahloba ha feela lets'oao la DMX le khaotsoe kapa le lahlehile.
• Tobetsa hakhutšoanyane M key, ha o bonts'a L-1~L-5, kenya mokhoa oa ho itlhahloba.
• Tobetsa ◀ kapa ▶ konopo ho fetola mokhoa oa nomoro(L-1L-5).
• Mokhoa oa ho itlhahloba o kenyelletsa mabone a mane ka thoko kapa ka ho lumellana.

Setlhophiso sa curve e nyenyefatsang

• Mokokotlo wa dimming wa Linear
• Logarithmic dimming curve

Tlhahlobo e sa sebetseng le ho rarolla mathata

Ho se sebetse hantle	Lisosa	Ho batle phoso
Ha ho khanya	1. Ha ho matla. 2. Khokahano e fosahetseng kapa e sa sireletsehang.	1. Hlahloba matla. 2. Lekola khokahano.
Mmala o fosahetseng	1. Khokahano e fosahetseng ea lithapo tsa R/G/B/W. 2. Phoso ea aterese ea DMX.	1. Hokela hape lithapo tsa R/G/B/W. 2. Beha aterese e nepahetseng ea decode.
Ho se leka-lekane pakeng tsa ka pele le ka morao, ka voltaglerotholi	1. Mohala o tsoang ho o molelele haholo. 2. Wire bophara e nyenyane haholo. 3. Tlala e fetang matla a phepelo ea motlakase. 4. Moroalo o fetang matla a taolo.	1. Fokotsa phepelo ea cable kapa loop. 2. Fetola terata e pharaletseng. 3. Kenya sebaka sa phepelo e phahameng ea matla. 4. Eketsa motlakase oa matla.

Litokomane / Lisebelisoa

SKYDANCE D4-P 4 Channel Constant Voltage DMX512 & RDM Decoder [pdf] Buka ea Taelo D4-P, D4-E, 4 Channel Constant Voltage DMX512 RDM Decoder, Moqtage DMX512 RDM Decoder, DMX512 RDM Decoder, RDM Decoder, D4-P, Decoder

Litšupiso

• Bukana ea Mosebelisi