SIMAIR SER1.3-B OLED Display Module

Lintlha tsa Motheo

Litlhaloso tsa Pontšo

1. Mokhoa oa ho bonts'a: Passive Matrix
2. Mmala oa Pontšo: Monochrome (Bosoeu)
3. Mosebetsi oa ho khanna: 1/64 Mosebetsi

Litlhaloso tsa Mechini

1. Setšoantšo sa Outline: Ho ea ka setšoantšo se kenyelelitsoeng
2. Palo ea Lipikselse: 128 x 64
3. PCB Boholo: 35.4×33.5×2.6 (mm)
4. Sebaka se sebetsang: 29.42 x 14.7 (mm)
5. Pixel Pitch: 0.23 x 0.23 (mm)
6. Boholo ba Pixel: 0.21 x 0.21 (mm)

Sebaka se sebetsang / 'Mapa oa Memori & Kaho ea Pixel

Setšoantšo sa Mechini

LINTLHA TSEO:

1. MOFUTA PONTSHO: 1.3″ OLED
2. VIEWING DIRECTION: Kaofela
3. MOKHOA OA POLARIZER: E FETILENG FELA/ KA TLOAELE E TŠOA
4. MOkhanni IC: SH1106
5. Qeto: 128×64
6. INTERFACE: SPI/IIC(Sebopeho sa kamehla ke SPI)
7. TLHOKOMELOTAGE:3.3V
   1. MOCHESO OA TSEBETSI: -40°C~70°C

Pin Tlhaloso

Setšoantšo sa Sehlahisoa

Setšoantšo sa Schemati

Fetolela SPI ho IIC:

1. Fetola R3 ho ea ho R1.
2. Ground DC pin le CS pin.
3. Sebelisa lenaneo la IIC

Absolute MaximumRatings

• Tlhokomeliso ea 1: Tsohle tse ka holimo voltagli thehiloe motheong oa "GND = 0V".
• Tlhokomeliso ea 2: Ha mojule ona o sebelisoa ho feta litekanyetso tse phahameng tse kaholimo, ho ka senyeha ho sa feleng ha module. Hape, bakeng sa ts'ebetso e tloaelehileng, ke ho lakatsehang ho sebelisa mojule ona tlas'a maemo ho ea ka Karolo ea 3. "Optics & Electrical Characteristics". Haeba mojule ona o sebelisoa ho feta maemo ana, ho se sebetse hantle ha mojule ho ka etsahala, le ho ts'epahala ha
  module e ka senyeha.
• Tlhokomeliso ea 3: Mekhahlelo ea mocheso e hlalositsoeng ha e kenyelle polarizer. Mocheso o phahameng ka ho fetisisa o mamellang oa polarizer e lokela ho ba 80C. Tlhokomeliso ea 4: VCC = 12 V, Ta = 25 ° C, 50% Checkerboard. Tokiso ea software e latela Karolo ea 4.4 Ho qala. Qetellong ea bophelo e hlalositsoe e le 50% ea khanya ea pele e fihletsoeng. Karolelano ea nako ea ho sebetsa ka mocheso oa kamore e hakanngoa ke ts'ebetso e potlakileng maemong a phahameng a mocheso.

Optics & Litšobotsi tsa Motlakase

Litšobotsi tsa Optics

* Tekanyo ea mahlo e nkiloeng VDD = 2.8V, VCC = 12V & 7.25V. Tokiso ea software e latela Karolo ea 4.2 Ho qala.

Litšobotsi tsa DC

• Tlhokomeliso 5 & 6: Khanya (Lbr) le Supply Voltage bakeng sa Pontšo (VPP) e itšetlehile ka phetoho ea thepa
  litšobotsi le kopo ea moreki.
• Tlhokomeliso ea 7: VDD = 2.8V, VCC = 12V, REF=910K, 100% Sebaka sa Pontšo Bulela.
• Tlhokomeliso ea 8: VDD = 2.8V, VCC = 8V, REF=910K, 100% Sebaka sa Pontšo Bulela. * Tokiso ea software e latela ho qala Karolo ea 4.2.

Litšobotsi tsa AC
Litšobotsi tsa Nako ea Sehokelo sa SPI:

Tshebetso ga tlhaloso

Litaelo

VCC E hlahisoa ke Setereke sa ka hare sa DC/DC

Haeba lerata le hlahile ka phoso fensetereng e bonts'ang nakong ea ts'ebetso, ka kopo seta ponts'o e le hore u boele u boele u bone tšebetso.

lefeela OLED_Init(feela)
{
//OLED 复位
OLED_RES_Clr();//RES 置 0
delay_ms(200);//延时 200ms
OLED_RES_Set();//RES 置 1
//OLED 初始化
OLED_WR_Byte(0xAE,OLED_CMD); /*bontsha*/
OLED_WR_Byte(0x02,OLED_CMD); /*seta aterese ea kholumo e tlase*/
OLED_WR_Byte(0x10,OLED_CMD); /* beha aterese ea kholomo e holimo*/
OLED_WR_Byte(0x40,OLED_CMD); /* beha mohala oa ho qala oa pontšo*/
OLED_WR_Byte(0xB0,OLED_CMD); /*seta aterese ea leqephe*/
OLED_WR_Byte(0x81,OLED_CMD); /*taolo ea konteraka*/
OLED_WR_Byte(0xcf,OLED_CMD); /*128*/
OLED_WR_Byte(0xA1,OLED_CMD); /* beha 'mapa oa karolo*/
OLED_WR_Byte(0xA6,OLED_CMD); /*tloaelehileng/ho furalla*/
OLED_WR_Byte(0xA8,OLED_CMD); /*multiplex ratio*/
OLED_WR_Byte(0x3F,OLED_CMD); /*mosebetsi = 1/64*/
OLED_WR_Byte(0xad,OLED_CMD); /*seta pompo ea ho tjhaja thusa*/
OLED_WR_Byte(0x8b,OLED_CMD); /* 0x8B 内供 VCC */
OLED_WR_Byte(0x33,OLED_CMD); /* 0X30—0X33 sete VPP 9V */
OLED_WR_Byte(0xC8,OLED_CMD); /*Com scan direction*/
OLED_WR_Byte(0xD3,OLED_CMD); /*seta ponts'o ea ponts'o */
OLED_WR_Byte(0x00,OLED_CMD); /* 0x20 */
OLED_WR_Byte(0xD5,OLED_CMD); /*seta karohano ea osc*/
OLED_WR_Byte(0x80,OLED_CMD);
OLED_WR_Byte(0xD9,OLED_CMD); /* beha nako ea ho tjhaja pele*/
OLED_WR_Byte(0x1f,OLED_CMD); /*0x22*/
OLED_WR_Byte(0xDA,OLED_CMD); /*seta lithakhisa tsa COM*/
OLED_WR_Byte(0x12,OLED_CMD);
OLED_WR_Byte(0xdb,OLED_CMD); /*set vcomh*/
OLED_WR_Byte(0x40,OLED_CMD);
OLED_E hlakileng();
OLED_WR_Byte(0xAF,OLED_CMD); /*bontsha HO*/
}

# hlalosa OLED_CMD 0 // ngola taelo
#define OLED_DATA 1 //write data
lefeela OLED_WR_Byte(u8 dat,u8 cmd)
{
u8 ke;
haeba(cmd)
OLED_DC_Set();
tse ling
OLED_DC_Clr();
OLED_CS_Clr();
bakeng sa(i=0;i<8;i++)
{
OLED_SCL_Clr();
haeba(dat&0x80)
OLED_SDA_Set();
tse ling
OLED_SDA_Clr();
OLED_SCL_Set();
hore <<=1;
}
OLED_CS_Set();
OLED_DC_Set();
}

Ho tšepahala

Likahare tsa Liteko tsa ho Tšepahala

Likarolo tsa samptse sebelisoang bakeng sa liteko tse ka holimo ha li kenyelle polarizer.
* Ha ho condensation ea mongobo e bonoang nakong ea liteko.

Ho hloleha Check Standard

Ka mor'a ho phethoa ha tlhahlobo e hlalositsoeng ea ho tšepahala, sampli ile tsa siuoa mocheso oa kamore bakeng sa lihora tsa 2 pele li etsa tlhahlobo ea ho hlōleha ho 23 ± 5 ± C; 55±15% RH

Litlhaloso tsa Taolo ea Boleng tse Tsoang

Tikoloho e Hlokehang

Teko le tekanyo ea moreki li tlameha ho etsoa tlasa maemo a latelang

• Mocheso: 23±5C
• Mongobo: 55 ±15% RH
• Fluorescent Lampmatla: 30W
• Sebaka se pakeng tsa Panel le Lamp≥ 50cm
• Sebaka se pakeng tsa Panel le Mahlo a Mohlahlobi: ≥ 30cm
• Sekoahelo sa menoana (kapa sekoahelo sa menoana) se tlameha ho apesoa ke mohlahlobi.
• Tafole ea tlhahlobo kapa jig e tlameha ho ba anti-electrostatic.

Sampling Moralo

Boemo II, Tlhahlobo e Tloaelehileng, Single Sampling, MIL-STD-105E

Litekanyetso le Boemo bo Amohelehang ba Boleng

Cosmetic Check (Display Off) sebakeng se sa sebetseng

Cosmetic Check (Display Off) sebakeng se sebetsang
E khothaletsoa ho e etsa sebakeng se hlakileng sa kamore (sehlopha sa 10k) haeba ho hlokahala

* Filimi e sireletsang ha ea lokela ho tlosoa cheke ea litlolo.
** Tlhaloso ea W & L & Φ (Yuniti: mm): Φ = (a + b) / 2

Ho hlahloba mohlala (Bontša ho Buletsoe) sebakeng se sebetsang

Litlhokomelo Ha U Sebelisa Li-module tsena tsa OEL Display

Ho Tšoara Litlhokomelo

1. Kaha phanele ea ponts'o e entsoe ka khalase, u se ke oa sebelisa litlamorao tse joalo tsa US ho theoha maemong a holimo.
2. Haeba pontšo e robehile ka lebaka la kotsi e itseng 'me ntho e ka hare ea organic ea tsoa, ​​e-ba hlokolosi hore u se ke ua hema kapa ua nyeka lintho tse phelang.
3. Haeba khatello e sebelisoa holim'a pontšo kapa sebakeng sa eona sa mojule oa pontšo ea OEL, mohaho oa sele o ka senyeha 'me u hlokomele hore u se ke ua sebelisa khatello likarolong tsena.
4. Polarizer e koahelang bokaholimo ba mojule oa ponts'o ea OEL e bonolo ebile e ngongoa habonolo. Ka kopo, e-ba hlokolosi ha u tšoara module ea pontšo ea OEL.
5. Ha bokaholimo ba polarizer ea module ea ponts'o ea OEL bo silafetse, hloekisa bokaholimo. E hloka peletage ea ka ho sebelisa theipi e latelang ea ho khomarela. * Scotch Mending Tape No. 810 kapa e lekanang le eona
   Le ka mohla u se ke ua leka ho hema sebakeng se silafetseng kapa ho hlakola bokaholimo u sebelisa lesela le nang le solvent joalo ka joala ba ethyl, kaha bokaholimo ba polarizer bo tla fifala. Hape, ela hloko hore mokelikeli o latelang le solvent li ka senya polarizer:
   • Metsi
   • Ketone
   • Lisebelisoa tse nkhang hamonate
6. Tšoara module ea OEL ka hloko haholo ha u beha module ea OEL ka har'a matlo a tsamaiso. Se ke oa sebelisa khatello e feteletseng kapa khatello ho module ea ponts'o ea OEL. Hape, u se ke ua fetelletsa filimi ka mekhoa ea mekhoa ea li-electrode. Likhatello tsena li tla ama ts'ebetso ea ponts'o. Hape, etsa bonnete ba ho tiea ho lekaneng bakeng sa linyeoe tse ka ntle.
7. U se ke ua sebelisa khatello ea kelello ho mokhanni IC le likarolo tse bōpiloeng tse potolohileng.
8. Se ke oa qhaqha kapa oa fetola mojule oa ponts'o ea OEL.
9. Se ke oa kenya matšoao ha matla a kelello a koetsoe.
10. Ela hloko ka ho lekaneng tikoloho ea ho sebetsa ha u sebetsana le li-module tsa OEL tse bontšang ho thibela ho hlaha ha likotsi tsa ho senyeha ha lintho ka motlakase o tsitsitseng.
    • * Etsa bonnete ba hore u theha 'mele oa motho ha u sebetsana le li-module tsa OEL.
    • * Etsa bonnete ba hore u theola lisebelisoa tseo u ka li sebelisang kapa ho li kopanya joalo ka litšepe tsa solder.
    • * Ho hatella tlhahiso ea motlakase o sa fetoheng, qoba ho etsa mosebetsi oa kopano tlas'a maemo a omileng.
    • * Filimi e sireletsang e ntse e sebelisoa ka holim'a phanele ea ponts'o ea module ea OEL. E-ba hlokolosi ho tloha ha motlakase o tsitsitseng o ka hlahisoa ha o hlahisa filimi e sireletsang.
11. Filimi ea ts'ireletso e sebelisoa ka holim'a phanele ea ponts'o le filimi ea tšireletso pele e e kopanya. Ka nako ena, haeba mochine oa pontšo oa OEL o bolokiloe ka nako e telele, lisebelisoa tse setseng tsa sekhomaretsi sa filimi ea tšireletso li ka 'na tsa lula holim'a sethala sa pontšo ka mor'a hore filimi e tlosoe. Boemong bo joalo, tlosa lisebelisoa tse setseng ka mokhoa o hlahisitsoeng Karolong e ka holimo ea 5).
12. 12) Haeba motlakase oa motlakase o sebelisoa ha mochine oa OEL oa pontšo o ntse o e-na le phoka kapa ha o behoa tlas'a maemo a mongobo o phahameng, li-electrode li ka 'na tsa senyeha' me tsa ela hloko ho qoba holimo.

Litlhokomelo tsa polokelo

1. Ha u boloka li-module tsa OEL, li kenye ka mekotleng e thibelang motlakase o tsitsitseng, ho qoba ho pepesehela mahlaseli a letsatsi kapa mabone a fluorescent l.amps. hape, ho qoba mocheso o phahameng le maemo a mongobo o phahameng kapa mocheso o tlase (ka tlase ho 0 ° C). (Re khothaletsa hore u boloke li-module tsena li le maemong a phuthetsoeng ha
2. li ne li romelloa ho tloha ZhongJingYuan technology Co., Ltd.) Ka nako eo, ela hloko hore marotholi a metsi a se ke a khomarela liphutheloana kapa mekotla kapa ho lumella phoka hore e be teng ka tsona. Haeba motlakase oa motlakase o sebelisoa ha marotholi a metsi a khomarela holim'a mochine oa pontšo oa OEL, ha mochine oa OEL oa pontšo o ntse o etsoa dewed kapa ha o behoa tlas'a maemo a mongobo o phahameng, li-electrode li ka 'na tsa senyeha' me tsa ela hloko tse ka holimo.

Litlhokomelo tsa ho Rala

1. Litekanyetso tse phahameng ka ho fetesisa ke litekanyo tse ke keng tsa fetisoa bakeng sa mojule oa ponts'o ea OEL, 'me haeba litekanyetso tsena li fetisitsoe, tšenyo ea phanele e ka hlaha.
2. E le ho thibela ketsahalo ea ho se sebetse ka lerata, ela hloko ho khotsofatsa lintlha tsa ViL le Vin, 'me ka nako e ts'oanang, ho etsa hore mohala oa mohala o be khutšoanyane ka hohle kamoo ho ka khonehang.
3. Re u khothalletsa hore u kenye lisebelisoa tse thibelang hona joale tse feteletseng (fuse, joalo-joalo) ho potoloho ea matla (VoD). (Boleng ba khothaletso: 0.5A)
4. Ela hloko ka ho lekaneng ho qoba ketsahalo e 'ngoe ea tšitiso ea lerata le lisebelisoa tsa boahelani.
5. Ha e le EMI, nka mehato e hlokahalang lehlakoreng la lisebelisoa.
6. Ha u tiisa mochine oa pontšo oa OEL, tiisa karolo ea ntlo ea polasetiki e ka ntle.
7. Haeba phepelo ea motlakase ho module ea ponts'o ea OEL e koetsoe ka likhoka ke liphoso tse kang ho ntša betri e kholo ha karolo ea OEL e bonts'a e ntse e sebetsa, re ke ke ra tiisa boleng ba module ena ea OEL ea ponts'o.
8. Monyetla oa motlakase oa ho hokahana le sefahleho se ka morao sa IC chip e lokela ho ba ka tsela e latelang: SSD1306
   * Ho hokela (kgokahanyo) le bokgoni bofe kapa bofe ntle le bo ka hodimo ho ka lebisa ho phatloheng ha IC.

Litlhokomelo ha u lahla li-module tsa OEL
Kopa lik'hamphani tse tšoanelehang ho sebetsana le litšila tsa indasteri ha li lahla li-module tsa OEL. Kapa, ha u li chesa, etsa bonnete ba hore u boloka melao le litaelo tsa tikoloho le bohloeki.

Litlhokomelo tse ling tse 0

1. Ha mochini oa pontšo oa OEL o sebelisoa nako e telele ka mokhoa o tsitsitseng o ka 'na oa sala e le setšoantšo se ka morao kapa phapang e fokolang e ka etsahala. Leha ho le joalo, haeba ts'ebetso e sitisoa 'me e sala e sa sebelisoe ka nakoana, boemo bo tloaelehileng bo ka tsosolosoa. Hape, ho ke ke ha e-ba le bothata ba ho tšepahala ha mojule.
2. Ho sireletsa li-module tsa OEL ho tloha marotholi a ts'ebetso ka rapture ea motlakase o tsitsitseng, joalo-joalo, u se ke ua ama likarolo tse latelang ha ho khoneha ha u ntse u sebetsana le li-module tsa OEL.
   * Lithakhisa le li-electrode
   * Meetso ea lipaterone joalo ka FPC
3. Ka module ena ea OEL ea ponts'o, mokhanni oa OEL o ntse a pepesoa. Ka kakaretso, likarolo tsa semiconductor li fetola litšobotsi tsa tsona ha leseli le khantša ho latela molao-motheo oa betri ea letsatsi. Ka lebaka leo, haeba mokhanni enoa oa OEL a pepesehetse leseli, ho ka etsahala ho se sebetse hantle.
   * Rala sehlahisoa le mokhoa oa ho kenya e le hore mokhanni oa OEL a ka sireletsoa leseli ha a sebelisoa.
   * Rala sehlahisoa le mokhoa oa ho kenya e le hore mokhanni oa OEL a ka sireletsoa khanyeng nakong ea ts'ebetso ea tlhahlobo.
4. Le hoja mochine ona oa OEL oa pontšo o boloka data ea boemo ba ts'ebetso ka litaelo le boitsebiso ba pontšo, ha lerata le feteletseng la ka ntle, joalo-joalo le kena ka har'a module, boemo ba ka hare bo ka fetoloa. Ka hona hoa hlokahala ho nka mehato e nepahetseng ho thibela ho hlahisa lerata kapa ho sireletsa tšusumetsong ea lerata ho moralo oa sistimi. Re u khothalletsa hore u thehe software ea eona ho etsa khatholoho ea nako le nako ea maemo a ts'ebetso (ho hlophisa bocha ha litaelo le ho fetisoa bocha ha data e bonts'itsoeng) ho sebetsana le lerata le kotsi.

Tiisetso:
Nako ea tiisetso e tla nka likhoeli tse leshome le metso e 'meli (12) ho tloha ka letsatsi la pelehi. Moreki o tla qeta ho kopanya lits'ebetso tsohle nakong ea likhoeli tse leshome le metso e 'meli (12) tse sebetsang. Wuxi Siminuo Technology e tla ikarabella bakeng sa ho khutlisa lihlahisoa life kapa life tse nang le thepa e sa sebetseng kapa ts'ebetso e sa lumellaneng le litlhaloso tsa sehlahisoa, litšoantšo tse sebetsang le litlhaloso nakong ea waranti. Lihlahisoa tsohle li tlameha ho bolokoa, ho ts'oaroa le ho bonahala li lumella ho tšoaroa hantle nakong ea tiisetso. Tiisetso e tla ba e khethehileng ha thepa e khutlisitsoeng e le kantle ho lipehelo tse kaholimo.

Tlhokomeliso:
Ha ho karolo ea thepa ena e ka hlahisoang bocha kapa ho kopitsoa ka mokhoa ofe kapa ofe kapa ka mekhoa efe kapa efe ntle le tumello e ngotsoeng ea Wuxi Siminuo Technology. Wuxi Siminuo Technology e na le tokelo ea ho etsa liphetoho ho thepa ena ntle le tsebiso. Wuxi Siminuo Technology ha e nke molato oa mofuta ofe kapa ofe o hlahang ka lebaka la ho se nepahale ho teng ho sesebelisoa sena kapa ka lebaka la ts'ebeliso ea sona kapa ts'ebeliso ea sehlahisoa kapa potoloho efe kapa efe, hape, ha ho na boemeli ba hore thepa ena e sebetsa ho lihlahisoa tse hlokang ho ts'epahala ha maemo a holimo, joalo ka lihlahisoa tsa bongaka. Ho feta moo, ha ho laesense ea litokelo life kapa life tsa thepa ea mahlale e fanoang ka moelelo kapa ka tsela e 'ngoe, 'me ha ho boemeli kapa tiisetso ea hore eng kapa eng e entsoeng ho ea ka thepa ena e ke ke ea lokoloha ho tlolo ea molao kapa litokelo tsa litokelo tsa motho e mong. Mabitso a mang kaofela a lihlahisoa a boletsoeng mona ke matšoao a khoebo le/kapa matšoao a ngolisitsoeng a lik'hamphani tsa bona.

Lipotso Tse Botsoang Hangata

P: Ke mehato efe ea ho sebetsana le OLED Display Module?

A: Ha u sebelisa OLED Display Module, etsa bonnete ba hore u latela litemoso tsena tsa ho sebetsana:

• Tšoara ka hloko ho qoba tšenyo ea 'mele.
• Qoba ho pepesehela mocheso kapa mongobo o feteletseng.
• Se ke oa kenya khatello e feteletseng skrineng.

Litokomane / Lisebelisoa

SIMAIR SER1.3-B OLED Display Module [pdf] Bukana ea Mosebelisi SER1.3-B OLED Display Module, SER1.3-B, OLED Display Module, Display Module, Mojule

Litšupiso

• Bukana ea Mosebelisi