SILICON LABS C8051F34x Tataiso ea mosebelisi ea nts'etsopele ea lisebelisoa

Litaba tsa Kit

The C8051F34x Development Kit e na le lintho tse latelang:

• Lethathamo la lintlha tsa C8051F340
• Tataiso ea ho qala ka potlako ea C8051Fxxx
• Adapter ea motlakase ea AC ho ea ho DC
• USB Debug Adapter (USB to Debug Interface)
• Cable ea USB
• CD-ROM

Ho theha Hardware ho Sebelisa Adapter ea USB Debug

Boto e shebiloeng e hokahane le PC e tsamaisang Silicon Laboratories IDE ka USB Debug Adapter joalo ka ha ho bonts'itsoe ho Setšoantšo sa 1.

1. Hokela USB Debug Adapter ho sehokelo sa DEBUG botong e shebiloeng ka thapo ea ribone ea lipini tse 10.
2. Hokela ntlha e 'ngoe ea thapo ea USB ho sehokelo sa USB ho Adapter ea USB Debug.
3. Hokela pheletsong e 'ngoe ea thapo ea USB Boema-kepeng ba USB ho PC.
4. Hokela adaptara ea motlakase ea ac/dc ho jack ea matla P1 botong e shebiloeng.

Lintlha:

• Sebelisa konopo ea Seta Botjha ho IDE ho seta sepheo botjha ha o hoketswe o sebedisa USB Debug Adapter.
• Tlosa matla ho boto e shebiloeng pele u tlosa thapo ea ribone botong e shebiloeng. Ho hokela kapa ho hakolla thapo ha lisebelisoa li na le matla ho ka senya sesebelisoa le/kapa USB Debug Adapter.
  
  Setšoantšo sa 1. Setupo sa Hardware Ho Sebelisa Adapter ea USB Debug

Lintlha: Boto ea sepheo sa C8051F340 e na le bokhoni ba ho tsamaisoa ka thapo ea USB. Ho nolofalletsa mokhoa o tsamaisoang ke USB, khutsufatsa lithakhisa tse ngotsoeng VBUS le VREGIN hloohong ea J8. Se ke oa khutsufatsa lithakhisa tsohle tse 3 hloohong ea J8.

Setup ea Software

Hang ha Studio ea Bonolo e kentsoe, sesebelisoa ka boeona se ka sebelisoa ho kenya lisebelisoa tse ling tsa software le litokomane ho thusa ts'ebetsong ea nts'etsopele le tlhahlobo.

Setšoantšo sa 2. Studio e bonolo

Ho hlokahala likarolo tse latelang tsa Studio tsa Simplicity bakeng sa C8051F340 Development Kit:

• Tšehetso ea Karolo ea Lihlahisoa tsa 8051
• Sethala sa Moetsi oa Bonolo

Khoasolla le ho kenya Simplicity Studio ho tsoa ho www.silabs.com/8bit-software or www.silabs.com/simplicity-studio. Ha e se e kentsoe, tsamaisa Simplicity Studio ka ho khetha Qala> Li-Labs tsa Silicon> Studio e bonolo> Studio e bonolo ho tsoa ho menu ea ho qala kapa ho tobetsa konopo ea Studio e bonolo Shortcut ho desktop. Latela litaelo ho kenya software ebe o tobetsa Simplicity IDE ho qala IDE.
Lekhetlo la pele wizate ea pōpo ea morero e sebetsa, the Setsi sa tikoloho wizard e tla tataisa mosebelisi ts'ebetsong ea ho hlophisa lisebelisoa tsa kaho le khetho ea SDK.
Ho Khetho ea Karolo mohato oa wizate, khetha lethathamong la likarolo tse kentsoeng feela tse tla sebelisoa nakong ea nts'etsopele. Ho khetha likarolo le malapa mohatong ona ho ama likarolo tse bonts'itsoeng kapa tse sefiloeng mananeng a khetho ea lisebelisoa hamorao. Khetha lelapa la C8051F34x ka ho hlahloba lebokose la tlhahlobo la C8051F34x. Fetola the khetho ea karolo ka nako efe kapa efe ka ho fihlella Karolo ea Tsamaiso puisano e tsoang ho Fesetere> Likhetho> Ho bonolo Studio > Tsamaiso ea Karolo ntho ea menu.
Simplicity Studio e ka bona haeba lisebelisoa tse ling li sa kengoa tšebetsong. Haeba e Mothusi oa License e hlahisoa ka mor'a ho tlatsa Wizate ea Setup Environment, latela litaelo ho kenya ketane ea lisebelisoa.

Ho matha Blinky
Morero o mong le o mong o na le mohloli oa oona files. IDE e ka sebelisoa ho laola merero e mengata ka har'a pokello e bitsoang sebaka sa mosebetsi. Litlhophiso tsa sebaka sa mosebetsi li sebelisoa lefatšeng ka bophara mererong eohle e ka har'a sebaka sa mosebetsi. Sena se ka kenyelletsa litlhophiso tse kang likhokahano tsa bohlokoa, likhetho tsa lifensetere, le mokhoa oa khoutu le likhetho tsa ho fometa. Liketso tsa projeke, joalo ka ho aha le ho lokisa liphoso, li ameha ka maemo. Bakeng sa mohlalaample, mosebelisi o tlameha ho khetha morero ho Project Explorer view molemong oa ho aha morero oo.
Ho theha morero o thehiloeng ho Blinky exampLe:

1. Tobetsa thaele e bonolo ea IDE ho tsoa skrineng sa lapeng sa Simplicity Studio.
2. Tobetsa ea Etsa sehokelo se secha sa projeke ho tsoa skrineng sa kamohelo kapa u ee ho File Morero o mocha oa Silicon Labs MCU Project.
3. Ho theolelo ea Kit, khetha C8051F340 Development Kit, ho Karolo e theohang, khetha C8051F340, 'me ho drop-down ea SDK, khetha SDK e lakatsehang. Tobetsa E latelang.
4. Kgetha Example ebe o tobetsa Next.
5. Tlas'a C8051F340 Development Kit ho foldareng ea Blinky, khetha F34x Blinky ebe o tobetsa Qetella.
6. Tobetsa morerong ho Project Explorer ebe o tobetsa Haha, letšoao la hamore bareng e kaholimo. Ntle le moo, e ea ho ProjectBuild Project.
7. Tobetsa Debug ho khoasolla morero ho hardware le ho qala lenaneo la ho lokisa bothata.
8. Tobetsa konopo ea Resume ho qala khoutu e sebetsa. Lebone la LED le tlameha ho benya.
   
9. Tobetsa konopo ea Suspend ho emisa khoutu.
   
10. Tobetsa konopo ea Reset sesebelisoa ho seta hape sepheo sa MCU.
    
11. Tobetsa konopo ea Khaotsa ho khutlela ponong ea ntlafatso.
    

Bonolo Studio Thusa
Simplicity Studio e kenyelletsa lintlha tse qaqileng tsa thuso le litokomane tsa sesebelisoa ka har'a sesebelisoa. Thuso e na le litlhaloso bakeng sa fensetere ka 'ngoe ea lipuisano. Ho view litokomane tsa puisano, tobetsa letšoao la potso fensetereng:

Sena se tla bula fenstere e ikhethileng puisanong le lintlha tse ling.
Litokomane ka hare ho sesebelisoa li ka boela tsa e-ba viewed ka ho ea ho Thuso>Likahare tsa Thuso kapa Thuso> Batla.

Lefa 8-bit IDE
Hlokomela: Ho khothaletsoa ho sebelisa lisebelisoa tsa Studio tsa Simplicity ka C8051F340 Development Kit. Sheba karolo ea 3. “Software
Seta‚” leqepheng la 2 bakeng sa lintlha tse ling.
Khoasolla software ea 8-bit ho tsoa ho websaete (www.silabs.com/8bit-software) kapa sebelisa sehokelo se fanoeng ho CD-ROM ho kenya lisebelisoa tsa software bakeng sa lisebelisoa tsa C8051F34x. Ka mor'a ho kenya, mohlalaampli ka fumanoa ho …\Examptse\C8051F34x bukeng ea ho kenya. Bonyane, C8051F340 DK e hloka:

• Silicon Labs IDE-Software e nolofalletsang tlhahlobo ea pele, nts'etsopele, le ho lokisa liphoso.
• Configuration Wizard 2—Software ea ho qala khoutu ea lisebelisoa tsa C8051F34x.
• Keil C51 Tools—Keil 8051 Compiler/Assembler/Linker ketane ea lisebelisoa.
  Lisebelisoa tse ling tsa software tse teng li kenyelletsa:
• Keil µVision Driver—Mokhanni oa Keil µVision IDE e thusang nts'etsopele le ho lokisa liphoso ho C8051Fxxx MCUs.
• Lisebelisoa tsa Flash Programming le MCU Production Programmer-Lisebelisoa tsa mananeo bakeng sa mohala oa tlhahiso. Lintlha tse ling mabapi le likhetho tse fumanehang tsa mananeo li ka fumanoa ho websebaka: http://www.silabs.com/products/mcu/Pages/ProgrammingOptions.aspx.
• Lisebelisoa tsa ntlafatso ea ToolStick-Software le mohlalaamples bakeng sa sethala sa ntlafatso sa ToolStick. Lintlha tse ling ka sethaleng sena li ka fumanoa ho www.silabs.com/toolstick.
  Sesebelisoa sa nts'etsopele se kenyelletsa mofuta oa morao-rao oa sesebelisoa sa C51 Keil 8051. Sesebelisoa sena sa lisebelisoa qalong se lekantsoe boholo ba khoutu ea 2 kB mme mananeo a qala ka aterese ea khoutu 0x0800. Kamora ho ngolisoa, moeli oa boholo ba khoutu o tlosoa ka botlalo mme mananeo a tla qala atereseng ea khoutu 0x0000.

Ho ngolisa lisebelisoa tsa Keil:

1. Fumana Nomoro ea Sehlahisoa se hatisitsoeng ho CD-ROM. Haeba ha u sa na nomoro ena ea serial, ingolise ho Silicon Labs websaete (www.silabs.com/8bit-software) ho fumana nomoro ea serial.
2. Bula Keil µVision4 IDE ho tsoa bukeng ea ho kenya ka litokelo tsa tsamaiso.
3. Khetha File> Tsamaiso ea Lilaesense ho bula fensetere ea Tsamaiso ea License.
   
   Setšoantšo sa 3. Keil µVision4 IDE Fensetere ea Tsamaiso ea License
4. Tobetsa konopo ea Fumana LIC ka Marang-rang… ho bula fensetere ea Ho Fumana License IDE Code (LIC).
5. Tobetsa OK ho bula fensetere ea sebatli ho Keil websebaka. Haeba fensetere e sa bulehe, etela ho
   www.keil.com/license/install.htm.
6. Kenya Nomoro ea Sehlahisoa sa Silicon Labs e hatisitsoeng ho CD-ROM, hammoho le tlhahisoleseling efe kapa efe e hlokahalang.
7. Hang ha foromo e phethiloe, tobetsa konopo ea Romella. Lengolo-tsoibila le tla romelloa atereseng ea lengolo-tsoibila le fanoeng le khoutu ea ts'ebetso ea laesense.
8. Kopitsa Khoutu ea ID ea License (LIC) ho tsoa ho lengolo-tsoibila.
9. Beha LIC ho Khoutu e Ncha ea Laesense (LIC) lebokose la mongolo botlaaseng ba fensetere ea Tsamaiso ea License ho µVision4.
10. Tobetsa ea Kenya LIC konopo. Joale fensetere e lokela ho fana ka lethathamo la lifaele PK51 Prof. Developers Kit for Silabs e le a sehlahisoa se nang le tumello.
11. Click the Close button.

Boto ea Boipheliso

C8051F34x Development Kit e kenyelletsa boto e shebiloeng e nang le sesebelisoa sa C8051F340 se kentsoeng esale pele bakeng sa tlhahlobo le nts'etsopele ea software ea pele. Ho fanoe ka likhokahano tse ngata tsa input/output (I/O) ho thusa ho etsa prototyping ho sebelisoa boto e shebiloeng. Sheba Setšoantšo sa 4 bakeng sa libaka tsa lihokelo tse fapaneng tsa I/O.
P1 Power connector (e amohela ho kenya letsoho ho tloha ho 7 ho isa ho 15 VDC adaptara ea matla e sa laoleheng)
P2 Analog I/O block block
P3 sehokelo sa USB
P4 RS232 sehokelo
J1 Supply signal header
J2 Port 0 hlooho
J3 Port 1 hlooho
J4 Port 2 hlooho
J5 Port 3 hlooho
J6 Port 4 hlooho
J7 E hokela letlooa la phepelo ea +3V ho letlooa la phepelo la VDD
Sehlooho sa khetho ea matla ea J8 USB kapa VDD
Sehokelo sa J9 Debug bakeng sa sebopeho sa adaptara ea debug
J10, J11 kristale e ka ntle e nolofalletsa lihokelo
J12 Port I/O jumper configuration block
J13 96-pin sehokelo sa basali
J15 Jumper connection bakeng sa pin 1.5 ho li-capacitor (e sebelisoang ha VREF e hlahisoa ka hare)
Khokahano ea J16 Jumper bakeng sa mohloli oa potentiometer ho VDD
J17 Jumper connection bakeng sa potentiometer ho pin 2.5
J19 Serial Adapter target board power connector

Mehloli ea Oache ea Tsamaiso
Sesebelisoa sa C8051F340 se kentsoeng botong e shebiloeng se na le oscillator ea ka hare e hlophisitsoeng e nolofalitsoeng e le mohloli oa oache oa sistimi ha o seta bocha. Ka mor'a ho tsosolosa, oscillator ea ka hare e sebetsa ka makhetlo a 1.5 MHz (± 1.5%) ka ho feletseng empa e ka 'na ea hlophisoa ke software hore e sebetse ka maqhubu a mang. Ka hona, lits'ebetsong tse ngata ha ho hlokahale oscillator ea kantle. Leha ho le joalo, haeba u lakatsa ho sebelisa mochine oa C8051F340 ka lebelo le sa fumaneheng ka oscillator ea ka hare, ho ka sebelisoa kristale e ka ntle. Sheba database ea C8051F34x bakeng sa tlhaiso-leseling e batsi mabapi le ho lokisa mohloli oa oache ea sistimi.

Boto e reretsoeng e etselitsoe ho thusa ho kenngoa ha kristale e ka ntle. Tlosa li-blocks tse khutšoane lihloohong tsa J10 le J11 'me u kenye kristale ho li-pads tse tšoailoeng Y1. Kenya 10 M resistor ho R1 'me u kenye li-capacitor ho C6 le C7 u sebelisa litekanyetso tse loketseng kristale eo u e khethang. Sheba database ea C8051F34x bakeng sa tlhaiso-leseling e batsi mabapi le ts'ebeliso ea li-oscillator tsa kantle.

Li-switches le li-LED
Li-switches tse tharo li fanoe holim'a boto e reretsoeng. Fetolela RESET e hokahane le phini ea RESET ea C8051F340. Ho tobetsa RESET ho beha sesebelisoa boemong ba sona ba ho tsosolosa hardware. Li-Switch P2.0 le P2.1 li hokahane le li-pin tsa C8051F340 tsa I/O (GPIO) ka lihlooho. Ho tobetsa P2.0 kapa P2.1 ho hlahisa lets'oao le tlase la logic pineng ea koung. Tlosa li-blocks tse khutšoanyane ho hlooho ea J12 ho khaola Switch P2.0 le Switch P2.1 ho tloha ho li-port pins. Lipontšo tsa pini ea boema-kepe le tsona li fetisetsoa ho lithakhisa ho sehokelo sa J1 I/O. Sheba Lethathamo la 1 bakeng sa li-port pin le lihlooho tse tsamaellanang le switch ka 'ngoe.

Li-LED tse tharo li boetse li fanoe ka boto e reretsoeng. LED e khubelu e ngotsoeng PWR LED e sebelisetsoa ho bontša khokahanyo ea matla ho boto e shebiloeng. Li-LED tse holim'a marulelo a matala tse ngotsoeng ka mabitso a li-port pin li hokahane le lithakhisa tsa C8051F340's GPIO ka lihlooho. Tlosa li-blocks tse khutšoane hloohong ho hakolla li-LED ho phini ea koung. Lipontšo tsa pini ea boema-kepe le tsona li fetisetsoa ho lithakhisa ho sehokelo sa J1 I/O. Sheba Lethathamo la 1 bakeng sa li-port pin le lihlooho tse tsamaellanang le LED ka 'ngoe.

Ho boetse ho kenyelelitsoe botong e shebiloeng ea C8051F340 ke 10 K Thumb-Wheel Rotary Potentiometer, karolo ea nomoro ea R10. Potentiometer e hokahane le phini ea C8051F340's P2.5 ka hlooho ea J17. Tlosa boloko bo bokhutšoane hloohong ho hakolla Potentiometer ho pini ea koung. Letšoao la pini ea boema-kepe le lona le fetisetsoa pineng ho sehokelo sa J1 I/O. Sheba Lethathamo la 1 bakeng sa phini ea koung le hlooho e tsamaellanang le Potentiometer.

Lethathamo la 1. Lethathamo la Litlhaloso tsa I/O tsa Board

Universal Serial Bus (USB) Interface (J14)
Sehokelo sa Universal Serial Bus (USB) (P3) se fanoe ho nolofatsa likhokahano le sehokelo sa USB ho C8051F340. Letlapa la 2 le bonts'a litlhaloso tsa phini tsa J14.
Letlapa la 2. Litlhaloso tsa Pin ea Sehokelo sa USB

Lihokelo tsa PORT I/O (J2 – J6)
Ntle le matšoao ohle a boema-kepe ba I/O a fetisetsoang sehokelong sa katoloso sa li-pin tse 96, e 'ngoe le e 'ngoe ea likou tse hlano tse bapileng tsa C8051F340 e na le sehokelo sa eona sa lihlooho tse 10. Sehokelo se seng le se seng se fana ka phini bakeng sa li-port pins tse tsamaellanang 0–7, +3.3 VDC le mobu oa dijithale. Letlapa la 3 le hlalosa lithakhisa tsa lihokelo tsa koung. Taelo e tšoanang ea pin-out e sebelisoa bakeng sa lihokelo tsohle tsa koung.
Lethathamo la 3. Litlhaloso tsa Pin ea Khokahanyo ea Kou ea J12–J19

Tlhophiso e Ikemetseng ea USB (J8)
Boto ea sepheo sa C8051F340 e ka hlophisoa e le sesebelisoa sa USB se ikemetseng ho nka matla ho thapo ea USB sebakeng sa adaptara ea ac/dc e hoketsoeng ho P1. Ho lokisa liboto tse shebiloeng joalo ka sesebelisoa sa USB se ikemetseng, khutsufatsa lipini tsa VREGIN le VBUS hloohong ea J8.

Hlokomela: Ha boto ea sepheo sa C8051F340 e iketsetsa matla ho tsoa ho USB, Serial Adapter ha e sebelisoe ho tloha boto e shebiloeng. Seri Adapter e tlameha ho tsamaisoa ka kotloloho ka ho hokela adaptara ea ac/dc ho jack ea matla ea dc ea Serial Adapters. Hape, RS232 Serial Interface (P4) e ke ke ea sebelisoa ha u matlafatsa boto ea sepheo ho tsoa ho USB.

Lethathamo la Sehokelo sa DEBUG (J9)
Sehokelo sa DEBUG (J9) se fana ka phihlello ea lithakhisa tsa DEBUG (C2) tsa C8051F340. E sebelisoa ho hokela Seri Adapter kapa USB Debug Adapter ho boto e shebiloeng bakeng sa ho lokisa liphoso ka har'a potoloho le lenaneo la Flash.
Letlapa la 4 le bonts'a litlhaloso tsa phini ea DEBUG.

Sebopeho sa Seriba (P4)
Sehokelo sa transceiver sa RS232 le sehokelo sa DB-9 (P4) li fanoe holim'a boto e shebiloeng ho tsamaisa likhokahano tsa serial ho UART0 ea C8051F340. Matshwao a TX, RX, RTS le CTS a UART0 a ka hokelwa ho sehokedi sa DB-9 le transceiver ka ho kenya di-blocks tse kgutshwane hodima hlooho J12.
J12 [9-10] - Kenya thibelo e khutšoanyane ho hokahanya UART0 TX (P0.4) ho transceiver.
J12 [11-12] - Kenya thibelo e khutšoanyane ho hokahanya UART0 RX (P0.5) ho transceiver.
J12 [13-14] - Kenya thibelo e khutšoanyane ho hokahanya UART0 RTS (P2.6) ho transceiver.
J12 [15-16] - Kenya thibelo e khutšoanyane ho hokahanya UART0 CTS (P2.7) ho transceiver.
Letlapa la 4. Litlhaloso tsa Pin ea Sehokelo sa DEBUG

USB Debug Adapter Target Board Sehokelo sa Matla (J19)
USB Debug Adapter e kenyelletsa khokahano ho fana ka matla ho boto e shebiloeng. Khokahano ena e tsamaisitsoe ho tloha J9[10] ho leba J19[SER_PWR]. Beha sebaka se khuts'oane hloohong ea J19[REG_IN-P1_PWR] ho matlafatsa boto ka kotloloho ho tsoa ho adaptara ea motlakase ea ac/dc. Beha sebaka se khuts'oane ho J19[REG_IN-SER_PWR] ho matlafatsa boto ho tsoa ho Adapter ea USB ea Debug. Ka kopo hlokomela hore khetho ea bobeli ha e tšehetsoe ke EC1 kapa EC2 Serial Adapters.

Maqheka

Setšoantšo sa 5. C8051F340 Leano la Boto ea Sepheo

TOKOMANE PHETOHO LETHATA

• Phetolelo ea 0.1 ho ea ho Revision 0.2
• E tlositsoe EC2 Serial Adapter ho tswa ho Kit Contents.
• E tlositsoe Karolo ea 2. Ho Hlophisa Hardware ho sebelisoa EC2 Serial Adapter. Sheba Tataiso ea Basebelisi ea RS232 Serial Adapter (EC2).
• E tlositsoe Karolo ea 8. EC2 Serial Adapter. Sheba Tataiso ea Basebelisi ea RS232 Serial Adapter (EC2).
• E tlositsoe Karolo ea 9. Adapter ea USB Debug. Sheba Tataiso ea Basebelisi ea Adapter ea USB Debug.

Phetolelo ea 0.2 ho ea ho Revision 0.3

• e ngotsoe 3. "Setupo sa Software‚"

IoT Portfolio
http://www.silabs.com/IoT

SW/HW
www.silabs.com/simplicity

Boleng
www.silabs.com/quality

Tšehetso le Sechaba
community.silabs.com

Boithorollo

Silicon Laboratories e ikemiselitse ho fa bareki litokomane tsa morao-rao, tse nepahetseng, le tse tebileng tsa lisebelisoa tsohle le li-module tse fumanehang bakeng sa lisebelisoa tsa sistimi le lisebelisoa tse sebelisang kapa tse ikemiselitseng ho sebelisa lihlahisoa tsa Silicon Laboratories. Lintlha tsa sebopeho, li-module le li-peripherals tse fumanehang, boholo ba memori le liaterese tsa memori li bua ka sesebelisoa se seng le se seng, 'me li-parameter tsa "Ts'aelo" tse fanoeng li ka fapana ebile lia fapana lits'ebetsong tse fapaneng. Mohlala oa kopoamptse hlalositsoeng mona ke tsa merero ea litšoantšo feela. Silicon Laboratories e na le tokelo ea ho etsa liphetoho ntle le tsebiso e eketsehileng le meeli ho tlhahisoleseding ea sehlahisoa, litlhaloso le litlhaloso tse teng mona, 'me ha e fane ka litiisetso mabapi le ho nepahala kapa ho phethahala ha tlhahisoleseding e kenyellelitsoeng. Silicon Laboratories e ke ke ea ba le boikarabello bakeng sa litlamorao tsa ts'ebeliso ea tlhaiso-leseling e fanoeng mona. Tokomane ena ha e bolele kapa ho hlahisa mangolo a tumello a litokelo tse fanoeng ka tlase ho rala kapa ho etsa lipotoloho life kapa life tse kopaneng. Lihlahisoa ha lia lokela ho sebelisoa ka har'a Life Support System ntle le tumello e ngotsoeng e tobileng ea Silicon Laboratories. "Sistimi ea Ts'ehetso ea Bophelo" ke sehlahisoa kapa sistimi efe kapa efe e reretsoeng ho ts'ehetsa kapa ho ts'ehetsa bophelo le / kapa bophelo bo botle, boo, haeba bo hloleha, bo ka lebelloang ka mokhoa o utloahalang ho fella ka kotsi e kholo ea motho kapa lefu. Lihlahisoa tsa Silicon Laboratories hangata ha lia rereloa ts'ebeliso ea sesole. Lihlahisoa tsa Silicon Laboratories li ke ke tsa sebelisoa ho libetsa tsa timetso e kholo ho kenyeletsoa (empa li sa felle feela) libetsa tsa nyutlelie, tsa likokoana-hloko kapa tsa lik'hemik'hale, kapa limisaele tse khonang ho fana ka libetsa tse joalo.

Lintlha tsa Letšoao la Khoebo

Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs le Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo le metsoako ea eona, "li-microcontrollers tse sebelisang matla ka ho fetisisa lefatšeng", Ember®, EZLink ®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®, USBXpress® le tse ling ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 le THUMB ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a ARM Holdings. Keil ke lets'oao la khoebo le ngolisitsoeng la ARM Limited. Lihlahisoa tse ling kaofela kapa mabitso a mabitso a boletsoeng mona ke matšoao a beng ba ona.

Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA
http://www.silabs.com
E jarollotsoe ho tsoa Arrow.com.

Litokomane / Lisebelisoa

SILICON LABS C8051F34x Kit ea Nts'etsopele [pdf] Bukana ea Mosebelisi C8051F34x, C8051F34x Kit ea Ntlafatso, Letlapa la Nts'etsopele, Letlapa

Litšupiso

• Bukana ea Mosebelisi