SHURE ANIUSB Matrix Audio Network Interface Guide

Rea qala
Ho laola ANIUSB-MATRIX, sebelisa software ea Shure Designer. Kamora ho qeta ts'ebetso ena ea mantlha ea ho seta, o lokela ho khona ho:

• Laola ANIUSB-MATRIX ho Moqapi
• Tsamaisa molumo ho ANIUSB-MATRIX ka Moqapi
• Sebelisa motsoako oa matrix ho tsamaisa matshwao a medumo

Pele o qala, o tla hloka:

• Cat5e (kapa ho feta) cable ea Ethernet
• Sesebelisoa sa marang-rang se fanang ka Matla holim'a Ethernet (PoE)
• Shure Designer software e kentsoe komporong. Khoasolla ho www.shure.com.

Mohato oa 1: Hokela ho Marang-rang 'me u Fumane ho Moqapi

1. Hokela ANIUSB-MATRIX koung ea PoE ho sesebelisoa sa marang-rang u sebelisa thapo ea Cat5e (kapa e betere).
2. Hokela komporo ea hau e sebelisang Designer ho switch switch ea netweke.
3. Bula Moqapi, 'me u hlahlobe hore na u hokahane le marang-rang a nepahetseng ho Litlhophiso.
4. Tobetsa lisebelisoa tsa inthanete. Lenane la lisebelisoa tsa inthanete lea hlaha.
5. Ho tseba lisebelisoa, tobetsa aekhone ea sehlahisoa ho bonesa mabone sesebelisoa.

Mohato oa 2: Tsamaisa molumo 'me u sebelise DSP
Mokhoa o bonolo oa ho tsamaisa molumo le ho sebelisa DSP ke ka Moralo oa Optimize workflow. Ntlafatsa ka tsela e iketsang matsoao a molumo, e sebelisa litlhophiso tsa DSP, e bulela khokahano e sa bueng, 'me e nolofalletsa taolo ea logic ea LED bakeng sa lisebelisoa tse hokahaneng.
Bakeng sa example, re tla hokela maekerofounu ea lethathamo la litafole tsa MXA310.

1. Eya ho Merero ea ka> E Ncha ho theha projeke e ncha.
2. Kgetha E Ntjha > Kamore (phela) ho theha phaposi e ntjha. Lisebelisoa life kapa life tsa inthanete li hlaha lenaneng. Hula u lihele ANIUSBMATRIX le MXA310 ho li kenya kamoreng ea hau.
3. Kgetha Ntlafatsa.
4. Lekola litselana tsa molumo le li-setting ho netefatsa hore li lumellana le litlhoko tsa hau. U kanna ua hloka ho:
   • Hlakola litsela tse sa hlokahaleng.
   • Lipina tse ntle tsa DSP li a thibela ha ho hlokahala.
   • Lekola 'me u lokise sebaka sa maekrofounu.

U ka tsamaisa molumo ka letsoho ho Moqapi ka ntle ho Optimize workflow, kapa sebelisa Dante Controller.

Mohato oa 3: Lokisa Audio
Mehato ea ho qetela ea tlhophiso e fapana ho latela hore na o hokela lisebelisoa life tse ling ho ANIUSB-MATRIX.

1. Hokela lisebelisoa tse ling tsa analog le tsa USB ho ANIUSB-MATRIX. Haeba u na le komporo e nang le software ea videoconferencing, e hokela boema-kepeng ba USB.
2. Eya ho Matrix mixer ho tsamaisa molumo lipakeng tsa ANIUSB-MATRIX tse kentsoeng le liphetho. O ka romela tlhahiso e le 'ngoe ho liphetho tse ngata kapa ka tsela e fapaneng. Ho romella molumo ho tsoa ho MXA310 komporong, hlahloba lebokose moo Dante Input 1 le USB Output li kopanang teng.
3. Etsa tlhahlobo ea molumo 'me u fetole maemo a ho kenya le ho tsoa ho Moqapi.
4. Etsa kopo ea ho lekana (EQ) ha ho hlokahala ho ntlafatsa ho hlaka ha puo.

Fumana Boitsebiso bo Eketsehileng
Ithute haholoanyane ka ANIUSB-MATRIX karolong ea Thuso ea Moqapi kapa ho tataiso e felletseng ea mosebelisi ho lipapatso.shure.com/guide/ ANIUSB-Matrix.

Tlhaloso e Akaretsang
ANIUSB-MATRIX Audio Network Interface e fana ka likhokahano tsa USB, Dante, le mehloli ea molumo oa analog. Sebelisana 'me u hokahane le lisebelisoa tsohle tsa molumo marang-rang a le mong, ka ts'ehetso ea li-microphone tse se nang mohala, likhomphutha, lisebelisoa tsa mehala, li-codec tsa video le litsamaiso tsa libuela-hōle. Hokela ka thapo e le 'ngoe ea marang-rang ho amohela molumo le matla ka Power over Ethernet (PoE). Sebelisa software ea Shure Designer ho laola litlhophiso tsa molumo le marang-rang ho tsoa komporong efe kapa efe e hoketsoeng marang-rang a tšoanang.

Hardware le Tlhophiso

Panele e ka morao

Lipontšo tsa Boemo (Letšoao/Sekotwana)
Li-LED tsa mebala e meraro li bonts'a boemo ba lets'oao la molumo bakeng sa liteishene tsa analog le boemo ba khokahano bakeng sa mocha oa USB. Fetola maemo a tlhahiso ho software ea Shure Designer ho qoba ho pata.

Input / Phallo ea Analog

Naha ea LED	Boemo ba Letšoao la Audio
E tima	ka tlase ho -60 dBFS
Botala	-59 dBFS ho ea ho -24 dBFS
Bosehla	-23 dBFS ho ea ho -1 dBFS
Khubedu	0 dBFS kapa ho feta

Hlokomela: Li-LED tse kenang le tse hlahisoang li lula li le sieo ha metering e setetsoe ho Post-gain

USB Audio

Naha ea LED	Boemo
E tima	Ha ho sesebelisoa sa USB se hoketsoeng
Botala	Sesebelisoa sa USB se sebetsa ka katleho
Khubelu (ho benya)	Ho fumanoe bothata ka sesebelisoa sa audio se hoketsoeng sa USB

Kenyo ya Mantswe (Thibela Sehokelo)
Thibela Mosebetsi oa Pin:

+	Audio +
-	Audio -
	Sebaka sa molumo

Chassis Ground nsete
E fana ka khokahanyo ea boikhethelo bakeng sa mohala oa thebe oa maekrofono sebakeng sa chassis.

Audio Output (Thibela Sehokelo)
Molumo o leka-lekaneng o hokahana le sesebelisoa sa analoge. Beha boemo ba tlhahiso ho software ea Shure Designer hore e tsamaellane le kutloisiso ea ho kenya ea sesebelisoa sa analog.

Hlokomela: Sheba liphanele tse ka pele bakeng sa likabelo tsa sehokelo sa block.

Boema-kepe ba USB
E hokela khomphuteng ho romela le ho amohela motswako ofe kapa ofe wa dikanale tsa ho kenya le tse tswang.

Lipontšo tsa LED
Matla: Matla holim'a Ethernet (PoE) a teng

Hlokomela: Sebelisa ente ea PoE haeba sesebelisoa sa hau sa marang-rang se sa fane ka PoE.
Marang-rang: Khokahano ea marang-rang ea sebetsa
Molumo oa Marang-rang: Dante audio e teng marang-rang

Hlokomela: Lintlha tsa phoso li fumaneha ho log log in Shure Designer software.

Network Audio LED boitšoaro

Boemo ba LED	Ketsahalo
E tima	Ha ho lets'oao le sebetsang
Botala	Sesebelisoa se sebetsa ka katleho
Khubedu	Phoso e etsahetse. Sheba lethathamo la liketsahalo bakeng sa lintlha.

Boemo ba LED	Ketsahalo
E tima	Molumo ha oa ngoloa
Botala	Khokahano ea molumo e khorelelitsoeng e atlehile le sesebelisoa se seng
Khubedu	Phoso ea ho thaepa. Lisosa tse ka bang teng: Encryption e nolofalitsoe sesebelisoa se le seng eseng ho tsoaneng e 'ngoe ea Passphrase

Dante Network Port
E hokela ho sesebelisoa sa marang-rang ho amohela molumo oa Dante, Power over Ethernet (PoE), le data ho tsoa ho software ea taolo.

Seta Botjha Konopo
E seta botjha di-setting tsa sesebediswa ho kgutlela ho feme ya kamehla.
Matla holim'a Ethernet (PoE)
Sesebelisoa sena se hloka hore PoE e sebetse. E lumellana le mehloli ea PoE ea Sehlopha sa 0 le sa Sehlopha sa 3.

Matla holim'a Ethernet a fanoa ka e 'ngoe ea litsela tse latelang:

• Sesebelisoa sa marang-rang se fanang ka PoE
• Sesebelisoa sa poe sa PoE

Ho kenya le ho beoa ha Rack
Litharollo tse peli tse ntseng li eketseha li fumaneha bakeng sa ho kenya Audio Network Interface:
CRT1 19″ Rack Tray (sesebedisoa sa boikhethelo): E tšehetsa lisebelisoa tse ka bang 3; tjamello ka hara raka kapa tlasa tafole
Single-unit Mounting Tray (e kenyelelitsoe sesebediswa): E ts'ehetsa sesebelisoa se le seng bakeng sa ho kenya ka tlas'a tafole

Ho sireletsa lisebelisoa

Sebelisa li-screw tse kenyellelitsoeng ho tsoa ho khiti ea hardware e ntseng e behoa ho sireletsa Audio Network Interfaces. Audio Network Interfaces e ka hlongoa ho shebana le tsela efe kapa efe. Kenya li-screws ho tloha tlase ka mekoting e nepahetseng, ho latela litšoantšo tse latelang:

Lokisetsa masoba joalo ka ha ho bonts'itsoe bakeng sa ho boloka sesebelisoa se le seng ka har'a terei e kenyang yuniti e le 'ngoe
Lokisetsa masoba joalo ka ha ho bonts'itsoe bakeng sa ho boloka lisebelisoa tse ka bang 3 ka har'a 19 ″ rack tray

Rack Ear Configuration
Motsoako o fihlang ho 3 Audio Network Interfaces o ka kenngoa sebakeng se le seng sa rack ea 19-inch. Litsebe tsa rack tse fetolehang li tšehetsa ho kenngoa ka har'a rack ea thepa e tloaelehileng kapa ka tlas'a tafole.

Maemo a 19 ″ Mount ea Rack

1. Lumellanya litsebe le masoba a ntseng a phahama a lebisitsoeng pele.
2. Kenya li-screw tse 3 tse tšoereng tsebe tereing joalo ka ha ho bonts'itsoe
   

Tlas'a Tafole Mounting

1. Lokisa litsebe le masoba a ntseng a phahama a lebisitsoe holimo.
2. Kenya li-screw tse 3 tse tšoereng tsebe tereing joalo ka ha ho bonts'itsoe.
   

Ho kenya ka Tlas'a Tafole

1. Tšoara terei sebakeng se lakatsehang tlas'a tafole.
2. Sebelisa pentšele ho tšoaea sebaka sa likoti tse ntseng li hola holim'a tafole.
3. Ela likoti tse 4 bakeng sa li-screw. Bophara ba masoba a tereing ke 7.1 mm.
4. Kenya likarolo ka har'a terei.
5. Kenya ka li-screws tse 4 ho boloka terei ka tlas'a tafole

Boitsebiso ba Sesebediswa
Ho tsebahatsa hardware ka ho khantša mabone, khetha konopo ea Identify karolong ea khetho ea lisebelisoa.

Se ka Lebokoseng

KIT, SEBELISO, ANIUSB-MATRIX	90A33522
Mount Bracket (1/3 rack unit)	53A27742

Hlokomela: Thapo ea USB ha e kenyelelitsoe.

Ho Laola Lisebelisoa ka Shure Designer Software

Ho laola litlhophiso tsa sesebelisoa sena, sebelisa software ea Shure Designer. Moqapi o thusa bahokahanyi le bahlophisi ba sistimi ho rala sekoaelo sa molumo bakeng sa lits'ebetso ho sebelisa li-microphone tsa MXA le lisebelisoa tse ling tsa marang-rang tsa Shure.

Ho fihlella sesebelisoa sa hau ho Designer:

1. Khoasolla le ho kenya Moqapi khomphuteng e hokahantsoeng le netweke e le ngoe le sesebelisoa sa hau.
2. Bula Moqapi, 'me u hlahlobe hore na u hokahane le marang-rang a nepahetseng ho Litlhophiso.
3. Tobetsa lisebelisoa tsa inthanete. Lenane la lisebelisoa tsa inthanete lea hlaha.
4. Ho khetholla lisebelisoa, tlanya lets'oao la sehlahisoa ho bonesa mabone a sesebelisoa. Khetha sesebelisoa sa hau lenaneng ebe o tobetsa konopo ea ho Lokisa ho laola lisebelisoa tsa sesebelisoa.

• Ithute haholoanyane ho shure.com/designer.
  Hape o ka fihlella litlhophiso tsa sesebelisoa ka Shure Web Sesebelisoa sa Discovery

Sebelisa Moqapi oa Optimize Workflow
Ts'ebetso e ntlafalitsoeng ea Moqapi e potlakisa ts'ebetso ea ho hokahanya lits'ebetso ka bonyane maekerofounu e le 1 le processor e le 'ngoe ea molumo. Optimize e boetse e theha litsela tsa taolo e sa bueng ka likamoreng tse nang le likonopo tsa MXA tse sa bueng tsa netweke. Ha u khetha Optimize ka kamoreng, Moqapi o etsa se latelang:

• E etsa litselana tsa molumo le litsela tsa taolo ea limumu
• E lokisa litlhophiso tsa molumo
• Bulela khokahano ea semumu
• E nolofalletsa taolo ea lintlha tsa LED bakeng sa lisebelisoa tse sebetsang

Litlhophiso li behiloe molemong oa motsoako oa hau oa lisebelisoa. U ka khona ho etsa litlhophiso ho ea pele, empa mokhoa oa ho sebetsa hantle o u fa sebaka se setle sa ho qala.

Lisebelisoa tse tsamaellanang:

• MXA920
• MXA910
• MXA710
• MXA310 P300
• Kamore ea IntelliMix
• ANIUSB-MATRIX
• MXN5-C
• Konopo ea MXA Network Mute

Ho sebelisa mokhoa oa optimize:

1. Beha lisebelisoa tsohle tse hlokahalang ka kamoreng.
2. Khetha Optimize. Moqapi o ntlafatsa li-microphone le li-setting tsa DSP bakeng sa motsoako oa lisebelisoa tsa hau.

Haeba u tlosa kapa u eketsa lisebelisoa, khetha Ntlafatsa hape.

Ka mor'a ho ntlafatsa kamore, hlahloba le ho fetola litlhophiso ho lumellana le litlhoko tsa hau. U ka 'na ua hloka ho:

• Hlakola litsela tse sa hlokahaleng.
• Lekola maemo 'me u fetole phaello.
• Sheba hore na matšoao a litšupiso tsa AEC a tsamaisitsoe hantle.
• Lipina tse ntle tsa DSP li a thibela ha ho hlokahala.

Mokhoa oa ho nchafatsa Firmware u sebelisa Moqapi
E sebetsa ho Moqapi oa 4.2 le ho feta.

Pele o theha lisebelisoa, hlahloba lisebelisoa tsa firmware u sebelisa Designer ho nka advantage ea likarolo tse ncha le lintlafatso.
U ka boela ua kenya firmware u sebelisa Shure Update Utility bakeng sa lihlahisoa tse ngata.

Ho ntlafatsa:

1. Bula Moqapi. Haeba ho na le firmware e ncha eo ha u so e khoasolle, Moqapi o bonts'a banner e nang le lintlafatso tse fumanehang. Tobetsa ho khoasolla firmware.
2. Eya ho lisebelisoa tsa inthanete 'me u fumane lisebelisoa tsa hau.
3. Khetha mofuta oa firmware bakeng sa sesebelisoa ka seng ho tsoa kholomong ea firmware e fumanehang. Etsa bonnete ba hore ha ho motho ea hlophisang li-setting tsa sesebelisoa nakong ea ntlafatso.
4. Khetha lebokose le haufi le sesebelisoa ka seng seo u rerileng ho se ntlafatsa ebe u tobetsa Update firmware. Lisebelisoa li ka nyamela lisebelisoa tsa Marang-rang nakong ea ntlafatso. Se ke oa koala Moqapi ha u ntse u ntlafatsa firmware.

Phetolelo ea Firmware
Ha o ntlafatsa firmware, ntlafatsa lisebelisoa tsohle tsa software ho mofuta o tšoanang oa firmware ho netefatsa ts'ebetso e ts'oanang.
Firmware ea lisebelisoa tsohle e na le mofuta oa MAJOR.MINOR.PATCH (mohlala, 1.2.14). Bonyane, lisebelisoa tsohle tsa marang-rang,
e tlameha ho ba le linomoro tsa mofuta oa KHOLO le MINOR oa mofuta oa firmware (mohlala, 1.2.x).

Phapang Pakeng tsa 3.x le 4.x Firmware
Tšehetso ea Dante Domain Manager

• Joale o ka eketsa ANIUSB-MATRIX libakeng tsa software ea Dante Domain Manager.
• Lintlafatso tsa Encryption ea Molumo
• Firmware 4.x le e ncha e ntlafalitse ho ngolisoa ha molumo, kahoo etsa bonnete ba hore u ntlafatsa lisebelisoa tsohle tsa Shure u sebelisa encryption ho mofuta o tšoanang oa firmware.
• Web Lisebelisoa li tlositsoe
• Ka firmware 4.x le e ncha, Shure Designer software ke eona feela tsela ea ho laola ANIUSB-MATRIX.
• U ka fihlella litlhophiso tsa mantlha tsa sesebelisoa ka ho e bula ho tsoa ho Shure Web Sesebelisoa sa Discovery Device, empa u tlameha ho sebelisa Moqapi bakeng sa taolo e felletseng.
• Khoasolla Moqapi ho morao.com/designer

Litšebelisano le Phallo ea Pontšo

ANIUSB-MATRIX e na le lintlha tse 4 tsa Dante le liphetho tse 2 tsa Dante. O ka tsamaisa tlhahiso efe kapa efe ho tlhahiso efe kapa efe mme o lokisa crosspoint
fumana ka ho sebelisa motsoako oa matrix.

Mekhoa e Molemo ka ho Fetisisa

• Bakeng sa liphetho tse ntle, tsamaisa maekrofounu e le 'ngoe ho ea ho ANIUSB-MATRIX. Haeba u sebelisa li-microphone tse ngata sebakeng, sebelisa sesebelisoa se nang le
  automixer (joalo ka a P300 kapa IntelliMix Room).
• Sebelisa Shure Designer's ntlafatsa tshebetso ho theha kapele litsela tsa molumo oa Dante, litsela tsa taolo e sa bueng, litsela tsa motsoako oa matrix,
  le litlhophiso tse ling.

ANIUSB-MATRIX e na le 2 Dante transmit flows. Ithute haholoanyane ka Dante flows.
Tsena ke tse ling tsa lisebelisoa tseo u ka li hokelang ho ANIUSB-MATRIX:

1. Khomphuta e nang le software ea liboka
   Khomphuta e romela le ho amohela modumo ho tswa le ho tswa ho software ya diboka. Lipontšo tsohle li feta khokahanyo ea USB ea ANIUSB MATRIX. Mehloli ea Route Dante e sebelisa Dante Controller kapa Shure Designer software.
   Hlokomela: E lumellana le Mac le PC
2. Mehloli ea lisebelisoa tsa analoge
   Mehloli ea li-analogue (joalo ka li-microphone tse se nang mohala kapa lisebelisoa life kapa life tsa boemo ba mohala) li hokahana le mongolo oa analog.
3. Lisebelisoa tsa tlhahiso ea analog
   Libuela-hole, amplifiers, kapa lisebelisoa tsa ho rekota li hokahana le tlhahiso ea line ea analoge.
4. Maekrofono o lumellang Dante
   Maekerofounu ea Dante (e kang Shure Microflex Advance array) e hokahana le sesebelisoa sa marang-rang. Tsamaisa microphone
   lets'oao ho ANIUSB-MATRIX, ebe u sebelisa motsoako oa matrix ho tsamaisa lets'oao ho tsoa ho USB.
   
5. Laola komporo
   Khomphutha e hoketsoeng marang-rang e fihlella Moqapi oa Shure ho laola maemo le ts'ebetso ea mocha.
6. Netweke switjha
   Sesebelisoa sa marang-rang se fana ka Matla holim'a Ethernet (PoE) ho lisebelisoa tse e hlokang.

Ho hokela ANIUSB-MATRIX khomphuteng
Hokela ANIUSB-MATRIX komporong ka software ea liboka u sebelisa boema-kepe ba USB.
Ha ANIUSB-MATRIX e hokahane ka lekhetlo la pele, komporo e e hlokomela e le sesebelisoa sa audio sa USB. U ka 'na ua hloka
e khethe e le sesebelisoa sa ho kenya / se hlahisoang (ho rekota / ho bapala) ho fetisa molumo. Abela ANIUSB-MATRIX e le sesebelisoa sa kamehla ho netefatsa hore e fetisa molumo nako le nako ha e hokeloa. Sheba bukana ea komporo ea hau ho lokisa litlhophiso tsa molumo.

Ho tsamaisa liteishene tsa molumo ho ea Boema-kepeng ba USB
U ka tsamaisa molumo ho ea le ho tsoa ho ANIUSB u sebelisa Dante Controller kapa Shure Designer software. Sebelisa matrix a ANIUSB
mixer ho tsamaisa Dante le liteishene tsa analog ho ea boema-kepeng ba USB.

Mohato oa 1: Dante Controller kapa Shure Designer

1. Bula Dante Controller kapa Moqapi oa Shure le lisebelisoa tsa Dante tsa tsela (tse kang MXA kapa MXW microphone) ho liteishene tse kenyang tsa Dante tsa ANIUSB. Bolela likanale ho boloka tlaleho ea lisebelisoa.
2. Haeba o hloka ho romella liteishene ho tsoa ho ANIUSB ho lisebelisoa tse ling tse sebelisoang ke Dante (joalo ka ampsebuela-hōle, sebuela-hōle, kapa sesebelisoa sa ho rekota), tsamaisa liteishene tsa tlhahiso ea Dante tsa ANIUSB ho lisebelisoa tse loketseng ho Dante Controller.

Hlokomela: Moqapi oa Shure o theha litsela tsa audio tsa Dante lipakeng tsa lisebelisoa tsa Shure. Ho theha litsela tsa molumo oa Dante ka li-non-Shure Dantedevices, sebelisa Dante Controller

Mohato oa 2: Matrix mixer

1. Bula motsoako oa matrix oa ANIUSB ho tsamaisa liteishene tsa Dante le analog boema-kepeng ba USB.
2. Abela mocha oa Input oa USB (mantsoe a hole) ho liphetho tse nepahetseng. Haeba o rekota kopano, etsa bonnete ba hore o tsamaisa li-microphone tse haufi le ho kenya USB ho sesebediswa sa ho rekota.

Tšebelisano ea Adapter
Sesebelisoa sena se sebelisana le liadapter tsa USB-B ho ea ho USB-C. Ho sebelisa adaptara ho khothaletsoa feela bakeng sa likhomphutha tsa komporo le lilaptop, kaha lisebelisoa tse ngata tsa mehala ha li tšehetse molumo oa li-bi-directional ka USB kapa likoung tsa lehalima.

Litlhophiso tsa Mofuta oa Sesebelisoa sa USB
Ha o sebelisa codec e amanang le USB e nang le P300 kapa ANIUSB-MATRIX, ho ka 'na ha hlokahala hore u behe mofuta oa sesebelisoa sa USB mochine oa Shure.
Setting ea mofuta oa sesebelisoa sa USB e bolella codec hore na acoustic echo cancellation (AEC) ea hlokahala kapa che. Codec e ka bula kapa ea tima AEC ea eona (haeba e tšehetsoa).
Bakeng sa mohlalaampLe: U na le MXA710 e tsamaisitsoeng ho ANIUSB-MATRIX 'me u batla ho sebelisa MXA710's AEC. Seta sesebelisoa sa USB
thaepa ho Echo-cancing speakerphone ho bolella codec ho tima AEC ea eona.
Ho fetola mofuta oa sesebelisoa sa USB:

1. Ho Moqapi, fumana P300 kapa ANIUSB-MATRIX 'me u ee ho Litlhophiso> Kakaretso.
2. Khetha mofuta oa sesebelisoa sa USB:
   • Speakerphone: Bakeng sa ho sebelisa AEC ea codec
   • Echo-Canceling speakerphone: Bakeng sa ho sebelisa AEC ea sesebelisoa sa Shure
3. Kamora ho fetola mofuta oa sesebelisoa sa USB, khetha sesebelisoa sa hau joalo ka sesebelisoa sa audio sa kamehla maemong a codec.
4. Etsa mohala oa teko ho netefatsa hore AEC e sebetsa hantle.

ANIUSB-MATRIX feela: Designer's Optimize workflow e iketsetsa mofuta oa sesebelisoa sa USB. U ka e fetola hape ka letsoho

Khutsa Sync
Khokahano e khutsitseng e etsa bonnete ba hore lisebelisoa tsohle tse hokahantsoeng ka har'a sistimi ea lipuisano lia khutsa kapa li khutsitse ka nako e le 'ngoe le sebakeng se nepahetseng tseleng ea matšoao. Boemo ba ho khutsisa bo hokahanngoa ho lisebelisoa ho sebelisoa matshwao a utloahalang kapa likhokahano tsa USB. Ho sebelisa khokahano e khutsitseng, etsa bonnete ba hore logic e lumelletsoe lisebelisoa tsohle. Designer's Optimize workflow e lokisetsa litlhophiso tsohle tse hlokahalang tsa sync bakeng sa hau.
Lisebelisoa tse lumellanang tsa Shure logic:

• P300 (Hape e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• ANIUSB-MATRIX (Hape e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• Software ea IntelliMix Room (E boetse e khutsisa li-codec tse bonolo tse hoketsoeng ke USB)
• MXA910
• MXA920
• MXA710
• MXA310
• Konopo ea Mute ea Network
• ANI22-THIBELA
• ANI4IN-THIBELA
• Li-microphone tse nolofalitsoeng tsa MX tse hokahaneng le ANI22-BLOCK kapa ANI4IN-BLOCK
  • MX392
  • MX395-LED
  • MX396
  • MX405/410/415

Ho bulela khokahano e khutsitseng:

1. Bula sesebelisoa ho Moqapi kapa ho web kopo. Eya ho Litlhophiso > Taolo ea ho khutsisa.
2. Bulela Khomotsa sync.
3. Eya ho Inputs. Tšoaea lebokose la Logic ho lumella liteishene life kapa life tse kentsoeng ho bulela logic

Ho theha Khokahano ea Mute ho MXA310 le ANIUSB-MATRIX

Sebelisa setup sena ho khutsisa ANIUSB-MATRIX ka ho tobetsa konopo ea semumu ho MXA310. Ka lets'oao la ANIUSB-MATRIX
ketane, semumu se etsahala ka mora dikenyo.

Moqapi 4.2 le ho feta:

1. Kenya ANIUSB-MATRIX le MXA310 sebakeng se le seng ho Designer.
2. Kgetha Ntlafatsa. Moqapi o ntlafatsa maekrofono le litlhophiso tsa DSP bakeng sa motsoako oa lisebelisoa tsa hau, ho kenyelletsa le ho reteleha
   khokahanong e sa bueng.

Moqapi 4.1.x

1. Bula ANIUSB-MATRIX ho Moqapi 'me u ee ho Inputs.
2. Leqepheng lefe kapa lefe la mocha, khetha Logic butle. Sena se nolofalletsa logic ho likanale tsohle.
3. Bula MXA310 ho Moqapi 'me u ee ho Litlhophiso> Taolo ea logic.
4. Beha tšebetso ea Mute control ho Logic out.
5. E-ea ho Leseli. Beha setaele ho Reng.

Bakeng sa thuso ka ts'ebetsong e itseng ea sync, bona FAQs tsa rona.

Fetileview ea Shure Conferencing Devices

Shure e fana ka mefuta e mengata ea khetho ea khokahanyo bakeng sa liboka. Li-microphone tsa MXA, li-audio processors, le li-interface tsa marang-rang kaofela
sebelisa Dante ho romella molumo ka marang-rang a tloaelehileng a IT. U ka sebelisa software ea mahala ea Moqapi oa Shure ho laola lisebelisoa tse ngata tsa Shure le molumo oa tsela lipakeng tsa tsona.

Sesebelisoa	Morero	Likamano tsa 'mele	Dante I/Os
MXA910	Maekerofounu ea siling e nang le IntelliMix DSP	1 boema-kepe ba PoE	Liphetho tse 8 tsa mocha ka mong kapa 1 automix channel e hlahisoang ka IntelliMix DSP1 AEC referense input
			2 Leoto:
	Maekerofounu e nang le mela e nang le IntelliMix DSP	1 boema-kepe ba PoE	Liphetho tse 4 tsa mocha ka mong kapa 1 automix channel e hlahisoang ka IntelliMix DSP1 AEC referense input 4 Leoto:
MXA710			Liphetho tse 8 tsa mocha ka mong kapa 1 automix channel e hlahisoang ka IntelliMix DSP1 AEC referense input
MXA310	Maekerofounu ea sehlopha sa tafole	1 boema-kepe ba PoE	Liphetho tse 4 tsa mocha ka mong kapa 1 automix channel e hlahisoang

Sesebelisoa	Morero	Likamano tsa 'mele	Dante I/Os
P300	Motlakase oa molumo o nang le Intel-liMix DSP le motsoako oa matrix	1 USB in/out2 analog block ho 2 analog block out1 mobile TRRS port (3.5 mm)1 PoE+ port	Litlhahiso tse 8 tsa Dante tse nang le IntelliMix DSP2 tse thusang Dante 8 Liphetho tsa Dante
Kamore ea IntelliMix	Software ea ts'ebetso ea molumo e nang le IntelliMix DSP le motsoako oa matrix	E fapana ho latela sesebelisoa	Menyetla e 8 kapa e 16 ea Dante e nang le In-telliMix DSP8 tlatsetso ea Dante 8 Dante e hlahisa1 kenyeletso ea audio e hlakileng le tlhahiso le tlhahiso ea PC e kantle.
ANIUSB-MATRIX	Motsoako oa matrix o nang le USB le tlhahiso ea analog/output	1 USB in/out1 block ea analog ka har'a block e le 'ngoe ea analog kantle ho boema-kepe ba 1 ba PoE	4 Dante inputs2 Liphetho tsa Dante
ANI4IN (block kapa XLR con-li-nectors)	E fetolela matšoao a analog ho matšoao a Dante	4 analog ho 1 boema-kepe ba PoE	4 Litlhahiso tsa Dante
ANI4OUT (block kapa lihokelo tsa XLR)	E fetolela matshwao a Dante ho matshwao a analoge	4 analog out1 boema-kepe ba PoE	4 Liphetho tsa Dante
ANI22 (block kapa XLR con-li-nectors)	E fetolela matshwao a 2 a analoge ho matshwao a DanteE fetolela matshwao a 2 a Dante ho matshwao a analoge	2 analog in2 analog out1 boema-kepe ba PoE	2 Dante inputs2 Liphetho tsa Dante
MXN5-C	Sebuela-hōle se nang le marang-rang se tsamaisoang ke PoE	1 boema-kepe ba PoE	2 Dante inputs1 Tlhahiso ea Dante
Konopo ea MXA Network Mute	Konopo ea semumu ea netweke e tsamaisoang ke PoE bakeng sa lisebelisoa tsa Shure	1 PoE port1 sehokelo sa thapo ea matla bakeng sa setsi	n/a

Litlhophiso tsa Audio

Leano View
The schematic view ho Designer e fana ka overview ea ketane eohle ea mats'oao a molumo, e nang le bokhoni ba ho fetola litlhophiso le ho beha leihlo matšoao.

Tobetsa ka bohona ho kenya, tlhahiso, kapa block block ho fihlella likhetho tse latelang:

Ka Channel

Kopitsa / peista
Kopitsa le ho peista li-setting lipakeng tsa lintho. Bakeng sa mohlalaample, seta curve ea equator ho tlhahiso ea USB, ebe u sebelisa maemo a tšoanang bakeng sa tlhahiso ea analog. Kapa, ​​​​kopisa phaello le boemo bo khutsitseng ho tloha mocha o le mong ho ea ho tse ling tse ngata.

Emisa / emisa
E etsa motsu kapa o kenya tšebetsong seteishene

Nolofatsa / tima
E bulela kapa e tima (ha e sebetse ho motsoako oa matrix kapa automixer)

Fetola
E bula puisano ho fetola maemo a Global (tobetsa ka ho le letona sebakeng se se nang letho)

Khutsisa lisebelisoa tsohle
E tsamaisa mecha eohle ea ho kenya

Khutsa litholoana tsohle
E tsamaisa litsela tsohle tsa tlhahiso

Khutsisa lisebelisoa tsohle
Fokotsa linotlolo tsohle tsa ho kenya

Khutlisa litholoana tsohle
Fokotsa metjha eohle ea tlhahiso

Koala lipuisano tsohle
E hlakola lipuisano tsohle tse bulehileng sebakeng sa mosebetsi

Ho Iketsetsa Sebaka sa Mosebetsi
Theha tikoloho e tloahelehileng ho beha leihlo le ho laola sete ea lintho tse kenang, tse hlahisoang, le li-block tsa ho sebetsa ho tsoa skrineng se le seng.
Ho na le mekhoa e 'meli ea ho bula dialog:

• Tobetsa ka ho le letona> edita
• Tobetsa habeli se kentsoeng, se ntšitsoeng, kapa se sebetsoang

Bula lipuisano tse ngata kamoo u hlokang ho boloka litsamaiso tsa bohlokoa li le teng.

Metering le Audio Routing
Meter e hlaha tlasa tlatsetso e 'ngoe le e' ngoe le khumo ho bonts'a maemo a lets'oao (dBFS).
Meleng e hokelang lipehelo le lipehelo tsa sehatelli sa matrix e bonahala e le mebala ha likhokelo li thehiloe. Ha lets'oao le sa tsamaisoe, mola o bonahala o le moputsoa. Sebelisa lisebelisoa tsena ho rarolla mathata a molumo le ho netefatsa likhokahano le maemo.

Limumu le Lihlopha tsa Fader 

Limumu Groups	Sheba lebokose la "Mute sehlopha" ho kenya mocha sehlopheng. Ho khutsisa kanale efe kapa efe ka har'a sehlopha sa Ho khutsisa ho khutsisa likanale kaofela sehlopheng.
Lihlopha tsa Fader	Sheba lebokose la sehlopha sa Fader ho kenya mocha sehlopheng. Li-fader tsohle ka har'a sehlopha li hokahane, 'me li tsamaea hammoho ha fader e le' ngoe e lokisoa.

Ho lokisa maemo a ho kenya

1. Maemo a likanale tsa analoge le tsa Dante a ka fetoloa tabeng ea Input.
   Ho beha leihlo maemo a ho kenya letsoho pele a fihla ho ANIUSB-MATRIX, etsa hore metering e be Pre-gain ho menu ea Litlhophiso. Ha u lokisa li-fader, seta metering ho Post-gain.
   Mehloli ea Dante
2. Sheba boemo ba mohloli pele e fihla ho Network Interface:
   • Netefatsa hore li-microphone tse nang le marang-rang kapa mehloli e meng ea Dante e sebetsa maemong a tloaelehileng a tlhahiso.
   • Fetola maemo a li-microphone tsa MXA ho Designer.
3. Fetola phaello ea dijithale ho Moqapi:
   • Sebelisa li-fader kapa u kenye boleng ba phaello ka bowena.
   • Phaello ea dijithale e fetola boemo ba lets'oao pele e fihla ho motsoako oa matrix.
   • Kopanya maemo a phahameng ka hohle kamoo ho ka khonehang ntle le kanale e lerata ho feta ho fihla boemong ba tlhoro (0 dB) metara.

Hlokomela: Motsoako oa matrix o fana ka phaello ea crosspoint, ho lokisa li-submixes tse arohaneng bakeng sa liphetho tse fapaneng.

Tekanyo ea Parametric

Phahamisa boleng ba molumo ka ho fetola karabelo ea makhetlo le parametric equalizer.
Likopo tse tloaelehileng tsa ho lekanya:

• Ntlafatsa ho khona ho bua
• Fokotsa lerata ho tsoa litsing tsa HVAC kapa liprojekere tsa video
• Fokotsa litšitiso tsa kamore
• Fetola karabelo ea maqhubu bakeng sa lits'ebetso tsa matlafatso

Haeba u sebelisa software ea Shure Designer ho hlophisa sistimi ea hau, ka kopo sheba karolo ea Thuso ea Moqapi bakeng sa lintlha tse ling mabapi le sehlooho sena.

Ho beha Mefuta ea Filter
Fetosa litlhophiso tsa sefe ka ho fetola li-ekhone ho kerafo ea karabelo ea khafetsa, kapa ka ho kenya linomoro tsa linomoro. Tlosa sefe
ho sebelisa lebokose la ho hlahloba haufi le sefe.

Mofuta oa Sefe
Ke sehlopha sa pele le sa ho qetela feela tse nang le mefuta e ka khethoang ea sefe.
Parametric: E kokobetsa kapa e matlafatsa lets'oao ka har'a sebaka seo u ka se khonang
Khaola ka tlaase: E theola lets'oao la molumo ka tlase ho maqhubu a khethiloeng
Shelf e tlase: E kokobetsa kapa e matlafatsa lets'oao la molumo ka tlase ho maqhubu a khethiloeng
High Cut: E tima leqhubu la molumo ka holim'a maqhubu a khethiloeng
Shelf e Phahameng: E kokobetsa kapa e matlafatsa leqhubu la molumo ka holim'a maqhubu a khethiloeng

Khafetsa
Khetha maqhubu a bohareng a sefe ho seha/matlafatsa

Fumana
E fetola boemo bakeng sa sefe e itseng (+/- 30 dB)

Q
E fetola mefuta e mengata ea maqhubu a anngoeng ke sefe. Ha boleng bona bo ntse bo eketseha, bandwidth e ntse e fokotseha.

Bophara
E fetola mefuta e mengata ea maqhubu a anngoeng ke sefe. Theko e hlahisoa ka li-octave.

Hlokomela: Li-parameter tsa Q le bophara li ama lebelo la ho lekana ka tsela e ts'oanang. Phapang feela ke tsela eo litekanyetso li emeloang ka eona.

 

Kopitsa, peista, kenya, 'me Export Equalizer Channel Litlhophiso
Likarolo tsena li etsa hore ho be bonolo ho sebelisa li-setting tsa li-equalizer tse sebetsang ho tsoa ketsong e fetileng, kapa ho potlakisa tlhophiso
nako.

Kopitsa le ho Peista
Sebelisa ho sebelisa kapele maemo a tšoanang a PEQ ho liteishene tse ngata. Khetha mocha ho tsoa ho menu ea ho theola skrineng sa PEQ.

Kgetha Kopitsa.
Lenaneng la ho hula, khetha kanale ho kenya maemo a PEQ ebe o khetha ho peista.

Ho Kenya le ho Romela kantle
Sebelisa ho boloka le ho kenya litlhophiso tsa PEQ ho tsoa ho file khomphuteng. Sena se na le thuso bakeng sa ho theha laebrari ea litlhophiso tse ka sebelisoang hape files
likhomphutha tse sebelisoang bakeng sa ho kenya sistimi.

Export
Kgetha kanale ho boloka tlhophiso ya PEQ, ebe o kgetha Export to file.

Kenya
Kgetha kanale ho kenya tlhophiso ya PEQ, ebe o kgetha Import ho tswa ho file.

Likopo tsa Equalizer
Li-acoustics tsa kamore ea liboka li fapana ho latela boholo ba kamore, sebopeho le thepa ea kaho. Sebelisa litataiso tafoleng e latelang.

EQ Kopo	Litlhophiso tse sisintsoeng
Treble boost bakeng sa kutloisiso e ntlafalitsoeng ea puo	Kenya filthara ea shelofo e phahameng ho matlafatsa maqhubu a fetang 1 kHz ka 3-6 dB.
Phokotso ea lerata ea HVAC	Kenya filthara e sehiloeng tlase ho fokotsa maqhubu a ka tlase ho 200 Hz
Fokotsa molumo oa molumo oa molumo le ho hlaka	Hlalosa mofuta o ikhethileng oa maqhubu a "thabisang" kamore: 1. Beha Q value2 e moqotetsane. Eketsa phaello ho pakeng tsa +10 le +15 dB, 'me u leke maqhubu a pakeng tsa 1 kHz le 6 kHz ho supa mefuta e fapaneng ea molumo oa flutter kapa sibilance3. Fokotsa phaello ka maqhubu a khethiloeng (qala lipakeng tsa -3 le -6 dB) ho fokotsa molumo o sa batleheng oa phaposi.
Fokotsa molumo o sa utloahaleng oa kamore	Hlalosa mofuta o ikhethileng oa maqhubu a "thabisang" kamore: 1. Beha boleng bo moqotetsane ba Q.2. Eketsa phaello ho pakeng tsa +10 le +15 dB, 'me u leke ka maqhubu a pakeng tsa 300 Hz le 900 Hz ho supa maqhubu a resonant.3. Fokotsa phaello ka maqhubu a khethiloeng (qala pakeng tsa -3 le -6 dB) ho fokotsa molumo o sa batleheng oa kamoreng.

Custom Presets
Sebelisa li-setting tsa pele ho boloka kapele le ho hopola li-setting. Lisebelisoa tse ka bang 10 li ka bolokoa sesebelisoa ka seng ho tsamaisana le litulo tse fapaneng
litokisetso. Tlhophiso esale pele e boloka litlhophiso tsohle tsa sesebelisoa ntle le Lebitso la Sesebelisoa, Litlhophiso tsa IP, le Li-password. Ho kenya le ho romela li-presets ho lits'ebetso tse ncha ho boloka nako le ho ntlafatsa ts'ebetso ea mosebetsi. Ha ho khethiloe seta esale pele, lebitso le hlaha ka holimo
menu e hlophisitsoeng esale pele. Haeba liphetoho li etsoa, ​​​​naleli ea linaleli e hlaha haufi le lebitso.

Hlokomela: Sebelisa li-setting tsa kamehla ho khutlela ho tlhophiso ea feme (ntle le Lebitso la Sesebelisoa, Litlhophiso tsa IP, le Li-password).

Bula lethathamo la li-presets ho hlahisa likhetho tse seng li setiloe:

boloka joalo ka ha esale pele:	E boloka li-setting ho sesebelisoa
load preset:	E bula tlhophiso ho tsoa sesebelisoa
import from file:	Khoasolla se seng esale pele file ho tloha komporong ho kena sesebelisoa. Files e ka khethoa ka sebatli kapa ea huleloa ka har'a fensetere ea thepa.
thomello ho file:	E boloka seta esale pele file ho tloha sesebelisoa ho ea khomphuteng

Mohlahisi oa Matrix

Mohlahlobi oa matrix o tsamaisa lipontšo tsa molumo lipakeng tsa lisebelisoa le lisebelisoa tsa tsela e bonolo le e tenyetsehang:
Romela mocha o le mong ho liphetho tse ngata Romela likanale tse ngata tse kenyang tlhahiso e le 'ngoe
\

Ho Fumana Molemo
Crosspoint gain e fetola phaello pakeng tsa ho kenya letsoho le tlhahiso e itseng, ho etsa li-submixes tse arohaneng ntle le ho fetola litlhophiso tsa ho kenya kapa ho hlahisa lihlahisoa. Khetha boleng ba dB sebakeng sefe kapa sefe ho bula phanele ea ntlafatso ea phaello. Fumana staging: Input fader > crosspoint gain > output fader

Litsela tsa Tsela
Kopanya lisebelisoa le lihlahisoa ka ho khetha lebokose moo li kopanang teng.

ANIUSB-MATRIX Litsela tsa kamehla
Motsoako oa matrix o theha litsela tsena tsa kamehla. Li fetole hore li lumellane le litlhoko tsa hau

Ho Sebelisa Boemo ba Mehala 

Sebopeho sa boemo ba Mohala oa Moqapi se sebelisa li-LED tsa maekerofounu ho bontša hore na u le mohaleng oa videoconferencing kapa che. Ena ke karolo ea boemo ba sebaka, kahoo e sebetsa ho li-microphone tsohle tse sebakeng sa Moqapi

1. Beha li-microphone tsohle le li-processor (ANIUSB-MATRIX, IntelliMix Room, kapa P300) sebakeng se le seng sa Moqapi.
2. Tsamaisa mats'oao a maekerofounu ho processor ka letsoho kapa ka Moqapi oa Optimize workflow.
3. Eya ho [Sebaka sa Hao] > Litlhophiso > Boemo ba ho letsetsa ho bulela kapa ho tima boemo ba ho letsa.

Ha boemo ba call bo butswe:

• Li-microphone LED li tima = Ha li letsetsoa
• Li-microphone LEDs = Ka mohala

Boemo ba mohala bo lumellana le li-codec tse latelang:

• Lihlopha tsa Microsoft
• Likamore tsa Lihlopha tsa Microsoft
• Atometsa Client bakeng sa liboka
• Likamore tsa Zoom

Hlokomela: Haeba codec ea hau e sebetsa komporong e nang le sistimi e sebelisang Chrome, boemo ba mohala bo ke ke ba sebetsa.

Koetliso

Encryption e sebetsa boemong ba kamore, ho bolelang hore lisebelisoa tsohle tse kenyellelitsoeng ka phapusing li tlameha ho ba le litlhophiso tsena. Molaetsa o kentsoe ka mokhoa o patehileng ka Advanced Encryption Standard (AES -256), joalo ka ha ho hlalositsoe ke phatlalatso ea Setsi sa Naha sa Maemo le Thekenoloji ea 'Muso oa US (NIST) FIPS-197. Encryption ha e sebetse ka lisebelisoa tsa batho ba bang.

Ho kenya tšebetsong encryption:

1. Ka phaposing, tobetsa (Litlhophiso), e kaholimo ho le letona.
2. Kgetha encryption ya modumo.
3. Khetha Numella Encryption.

Likhetho tse ling li u lumella ho notlela encryption hape kapa ho e tima haeba encryption e ne e se e buletsoe pele 'me ha u sa e batla.

Bohlokoa: Hore encryption e sebetse:

• Encryption e tlameha ho lumelloa lefatšeng ka bophara kapa ho holofatsoa ho lisebelisoa tsohle tse hokahaneng tsa Shure ka phapusing e le 'ngoe.
• AES67 e tlameha ho holofala ho Dante Controller ho bulela kapa ho tima encryption. AES67 encryption ha e so tšehetsoe hajoale.

Hlokomela: Encryption e ke ke ea sebetsa lipakeng tsa lisebelisoa ho 3.x le 4.x firmware. Ntlafatsa lisebelisoa tsohle ho mofuta o tšoanang oa firmware ho sebelisa encrpytion.

Networking le Dante

Likhothaletso tsa switch le Cable bakeng sa Dante Networking
Li-switches le lithapo li laola hore na netweke ea hau ea molumo e sebetsa hantle hakae. Sebelisa li-switches le likhoele tsa boleng bo holimo ho etsa hore netweke ea hau ea molumo e tšepahale haholoanyane.

Li-switches tsa netweke li lokela ho ba le:

• Likou tsa Gigabit. Li-switch tse 10/100 li ka sebetsa ho marang-rang a manyane, empa li-switches tsa gigabit li sebetsa betere.
• Matla holim'a Ethernet (PoE) kapa likoung tsa PoE+ bakeng sa lisebelisoa life kapa life tse hlokang matla
• Likarolo tsa taolo ho fana ka tlhaiso-leseling mabapi le lebelo la koung, libali tsa liphoso, le bandwidth e sebelisitsoeng
  Bokhoni ba ho tima Energy Efficient Ethernet (EEE). EEE (eo hape e tsejoang e le "Green Ethernet") e ka baka ho theoha ha molumo le mathata a ho amahanya oache.
• Diffserv (DSCP) Quality of Service (QoS) e tlang pele ka thata le mela e 4

Lithapo tsa Ethernet li lokela ho ba:

• Cat5e kapa ho feta
• Sireletsa

Bakeng sa lintlha tse ling, bona FAQ ea rona mabapi le li-switches tseo u ka li qobang.

Dante e Phalla bakeng sa Shure Devices
Ho phalla ha Dante hoa etsoa neng kapa neng ha u tsamaisa molumo ho tloha sesebelisoa se seng sa Dante ho ea ho se seng. Phallo e le 'ngoe ea Dante e ka ba le liteishene tsa audio tse fihlang ho tse 4. Bakeng sa mohlalaample: ho romela liteishene tsohle tsa 5 tse fumanehang ho tloha MXA310 ho ea ho sesebelisoa se seng ho sebelisa phallo ea 2 Dante, hobane phallo ea 1 e ka ba le liteishene tse fihlang ho 4. Sesebelisoa se seng le se seng sa Dante se na le palo e itseng ea phallo ea phetisetso le ho amohela phallo. Palo ea phallo e khethoa ke bokhoni ba sethala sa Dante.
Litlhophiso tsa phetisetso ea Unicast le multicast le tsona li ama palo ea phallo ea Dante eo sesebelisoa se ka e romellang kapa sa e amohela. Ho sebelisa phetiso ea multicast ho ka thusa ho hlola mefokolo ea phallo ea unicast.

Lisebelisoa tsa Shure li sebelisa liforomo tse fapaneng tsa Dante:

Sethala sa Dante	Shure Devices U Sebelisa Plat-sebopeho	Unicast Transmit Flow Limit	Unicast Fumana Moeli oa Phallo
Brooklyn II	ULX-D, SCM820, MXWAPT, MXWANI, P300, MXCWWAPT	32	32
Brooklyn II (ntle le SRAM)	MXA920, MXA910, MXA710, AD4	16	16
Ultimo/UltimoX	MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22, MXN5-C	2	2
DAL	Kamore ea IntelliMix	16	16

Ho sutumelletsa Mabitso a Sesebelisoa ho Dante Network
Ho romela lebitso la sesebelisoa hore le hlahe ho Dante Controller, ea ho Litlhophiso> Kakaretso ebe o kenya Lebitso la Sesebelisoa. Kgetha Push to Dante
ho romela lebitso ho hlaha netwekeng.

Hlokomela: mabitso a hlaha ho Dante Controller ka "-d" e khomaretsoeng.

Ts'ebetsong le Dante Domain Manager
Sesebelisoa sena se sebelisana le Dante Domain Manager software (DDM). DDM ke software ea taolo ea marang-rang e nang le netefatso ea basebelisi, ts'ireletso e thehiloeng ho karolo, le likarolo tsa tlhahlobo bakeng sa marang-rang a Dante le lihlahisoa tse nolofalitsoeng ke Dante.

Tsebo ea lisebelisoa tsa Shure tse laoloang ke DDM:

• Ha o kenya lisebelisoa tsa Shure domeineng ea Dante, etsa hore molaoli oa lehae a fihlelle ho Bala Ngola. Ho seng joalo, u ke ke ua ba teng
  e khona ho fihlella litlhophiso tsa Dante, ho etsa reset ea feme, kapa ho nchafatsa firmware ea sesebelisoa.
• Haeba sesebelisoa le DDM li sa khone ho buisana ka marang-rang ka lebaka lefe kapa lefe, u ke ke ua khona ho laola litlhophiso tsa Dante,
  etsa reset ea fektheri, kapa ntlafatsa firmware ea sesebelisoa. Ha khokahanyo e tsosolositsoe, sesebelisoa se latela moralo oa leano
  bakeng sa eona sebakeng sa Dante.
• Haeba senotlolo sa sesebelisoa sa Dante se butse, DDM ha e sebetse, kapa peakanyo ea sesebelisoa e setetsoe ho Thibela, li-setting tse ling tsa sesebelisoa lia tingoa. Tsena li kenyelletsa: Dante encryption, MXW association, AD4 Dante browse le Dante cue, le SCM820 linking.

Bona Litokomane tsa Dante Domain Manager bakeng sa tlhaiso-leseling e batsi

Ho lokisa litlhophiso tsa IP
Litlhophiso tsa IP li laoloa ho software ea Shure Designer. Ka kamehla, li behiloe ho Automatic (DHCP) mode. Mokhoa oa DHCP
e nolofalletsa lisebelisoa ho amohela litlhophiso tsa IP ho tsoa ho seva sa DHCP, kapa ho khutlela ka bohona ho litlhophiso tsa Link-Local ha ho se na DHCP. Liaterese tsa IP le tsona li ka hlophisoa ka letsoho.

Ho lokisa thepa ea IP, latela mehato ena:

1. Bula fensetere ea litlhophiso tsa sesebelisoa.
2. Eya ho Settings tab ya ebe o khetha Network.
3. Kgetha Auto kapa Manual. Haeba Auto e sebelisoa, liaterese li tla abeloa ka bo eona. Bakeng sa ho seta ka letsoho, latela litaelo tsa ho seta ka letsoho.
   

Ho beha Latency
Latency ke nako ea nako eo lets'oao le tsamaeang ho pholletsa le sistimi ho ea ho liphetho tsa sesebelisoa. Ho ikarabella bakeng sa phapang ea nako ea latency lipakeng tsa lisebelisoa le liteishene, Dante o na le khetho e reriloeng esale pele ea litlhophiso tsa latency. Ha maemo a tšoanang a
e khethiloeng, e netefatsa hore lisebelisoa tsohle tsa Dante marang-rang lia lumellana.

Litekanyetso tsena tsa latency li lokela ho sebelisoa e le qalo. Ho tseba nako e nepahetseng eo o ka e sebelisang bakeng sa ho seta, sebelisa setup, romella molumo oa Dante lipakeng tsa lisebelisoa tsa hau, 'me u lekanye ho lieha ha 'nete tsamaisong ea hau u sebelisa Audinate's Dante Controller.
software. Ebe u lebisa ho tlhophiso ea latency e haufinyane e fumanehang, 'me u sebelise eona.
Sebelisa software ea Audinate's Dante Controller ho fetola litlhophiso tsa latency.

Litlhahiso tsa Latency

Latency Setting	Boholo ba Nomoro ea Liphetoho
0.25 ms	3
0.5 ms (ea kamehla)	5
1 ms	10
2 ms	10+

Likoung tsa IP le Protocol  

Taolo ea Shure

Boema-kepe	TCP/UDP	Protocol	Tlhaloso	Fektheri De-phoso
21	TCP	FTP	E hlokahala bakeng sa lisebelisoa tsa firmware (ho seng joalo li koetsoe)	E koetsoe
22	TCP	SSH	Sebopeho se sireletsehileng sa Shell	E koetsoe

Boema-kepe	TCP/UDP	Protocol	Tlhaloso	Fektheri De- phoso
23	TCP	Telnet	Ha e tšehetsoe	E koetsoe
53	UDP	DNS	Sistimi ea Lebitso la Domain	E koetsoe
67	UDP	DHCP	Protocol ea Tlhophiso ea Moamoheli ea Matla	Bula
68	UDP	DHCP	Protocol ea Tlhophiso ea Moamoheli ea Matla	Bula
80*	TCP	HTTP	Hoa hlokahala ho qala e kenyelelitsoe web seva	Bula
443	TCP	HTTPS	Ha e tšehetsoe	E koetsoe
2202	TCP	ASCII	E hlokahala bakeng sa likhoele tsa taolo ea mokha oa boraro	Bula
5353	UDP	mDNS†	E hlokahala bakeng sa ho sibolla sesebelisoa	Bula
5568	UDP	SDT (multicast)†	E hlokahala bakeng sa puisano ea li-inter-device	Bula
57383	UDP	SDT (unicast)	E hlokahala bakeng sa puisano ea li-inter-device	Bula
8023	TCP	Telnet	Sebopeho sa sebopeho sa Debug	E koetsoe
8180	TCP	HTML	E hlokehang bakeng sa web sesebelisoa (firmware ea lefa feela)	Bula
8427	UDP	SLP (multicast)†	E hlokahala bakeng sa puisano ea li-inter-device	Bula
64000	TCP	Telnet	E hlokahala bakeng sa ntlafatso ea Shure firmware	Bula

* Likou tsena li tlameha ho buloa ho PC kapa sistimi ea taolo ho fihlella sesebelisoa ka firewall.

Li-protocol tsena li hloka multicast. Netefatsa hore multicast e hlophisitsoe hantle bakeng sa marang-rang a hau.

Sheba ea Audinate websebaka bakeng sa tlhahisoleseling mabapi le likou le liprothokholo tse sebelisoang ke molumo oa Dante.

Ho Sebelisa Likhoele Tsa Taelo 

sesebelisoa sena se fumana litaelo tsa logic holim'a marang-rang. Mekhahlelo e mengata e laoloang ka Moqapi e ka laoloa ho sebelisoa tsamaiso ea motho oa boraro, ho sebelisa mohala o loketseng oa taelo.

Likopo tse tloaelehileng:

• Semumu
• Mmala le boitšoaro ba LED
• E kenya li-presets
• Ho fetola maemo

Lethathamo le felletseng la likhoele tsa taelo le fumaneha ho:
pubs.shure.com/command-strings/ANIUSB-Matrix.

Seta bocha
Konopo ea ho reset e fumaneha ka har'a lesoba le lenyenyane karolong e ka morao. Sebelisa paperclip kapa sesebelisoa se seng se senyenyane ho tobetsa konopo.
Ho na le mesebetsi e 'meli ea ho tsosolosa hardware:

Reset marangrang (tobetsa konopo bakeng sa metsotsoana e 4-8)
E seta litlhophiso tsohle tsa Shure control le audio network IP hore e be li-factory tsa feme

Reset ea fektheri e felletseng (tobetsa konopo bakeng sa nako e telele ho feta metsotsoana e 8)
E khutlisetsa litlhophiso tsohle tsa marang-rang le tsa Moqapi ho li-factory tsa feme.

Likhetho tsa ho seta botjha Software
Ho khutlisetsa litlhophiso ntle le ho seta bocha ka botlalo, sebelisa e 'ngoe ea likhetho tse latelang:
Reboot Device: Power-cycles sesebelisoa joalokaha eka ha sea ka sa hokeloa marang-rang. Litlhophiso tsohle lia bolokoa ha sesebelisoa se le teng
qala bocha.

Litlhophiso tsa kamehla: Ho khutlisetsa litlhophiso tsa molumo ho tlhophiso ea feme (ntle le Lebitso la Sesebelisoa, Litlhophiso tsa IP, le Li-password), khetha Load Preset ebe u khetha li-setting tsa kamehla.

Ho batle phoso

Bothata	Tharollo
Software e salletse morao ho sebatli sa Google Chrome	Bothata bo amana le sebatli. Koala khetho ea ho potlakisa hardware ho Chrome.
Boleng ba molumo ha bo hlakane	Sebelisa equalizer ho fetola karabelo ea maqhubu. Sheba lits'ebetso tsa li-equalizer bakeng sa ts'ebeliso e nepahetseng.
Molumo o utloahala o le holimo haholo kapa molumo o tlase haholo	Etsa bonnete ba hore sampLitlhophiso tsa litekanyetso tsa Playback le Rekota lia tšoana ho li-setting tsa molumo oa komporo ea hau. Haeba tsena samplitefiso ha li lumellane, molumo o ka utloahala o le holimo haholo kapa o le tlase haholo ka molumo.
Hardware ha e hlahe ho sibolloa ha sesebelisoa	Netefatsa hore lisebelisoa li sebetsa Netefatsa hore khomphutha le lisebelisoa li ho netweke e le 'ngoe 'me li behiloe ho subnet e ts'oanangKoala likhokahano tse ling tsa marang-rang tse sa sebelisoeng ho hokela sesebelisoa (ho kenyeletsoa le WiFi)Lekola hore na seva ea DHCP ea sebetsa (haeba ho hlokahala) Seta sesebelisoa bocha.
Ha ho molumo	Netefatsa hore ANIUSB-MATRIX e khethiloe e le sesebelisoa sa molumo ka har'a lisebelisoa tsa molumo kapa phanele ea thepa ka har'a komporo Likanale tsa molumo li tlameha ho fetisetsoa ho tlhahiso ka motsoako oa matrix.

Bothata	Tharollo
	Likamano pakeng tsa lisebelisoa li tlameha ho thehoa ho Dante Controller™ softwareHlahloba likhoele Netefatsa hore likanale tsa ho kenya/tse tsoang ha lia khutsisoa Lekola hore na maemo a fader ha aa behoa tlase haholo Etsa bonnete ba hore ha ho na phoso ea ho khoasolla - poleloana e sa lumellaneng kapa encryption e lumelletsoeng sesebelisoa se le seng feela e sitisa molumo.
Ha e khone ho tsamaisa liteishene tsa molumo tsa Dante	®Kenya mofuta oa morao-rao oa Dante Controller ho tsoa ho Audinate, o fumanehang ho www.audinate.com.
Hardware ha e sebetse	Sesebelisoa sa marang-rang se tlameha ho fana ka Matla holim'a Ethernet. Ka tsela e 'ngoe, ente ea PoE e tlameha ho sebelisoa Hlahloba likhoele tsa marang-rang le likhokahano

Lethathamo la Ketsahalo
Lenane la liketsahalo le fana ka tlaleho e qaqileng ea ts'ebetso ho tloha ha sesebelisoa se sebelisoa. Lenane le bokella ho fihla ho 1,000
liketsahalo tse kenoang le nako-stamps bona mabapi le potoloho ea matla ea ho qetela. Likenyo li bolokoa mohopolong oa ka hare, 'me li
ha e hlakisoe ha sesebelisoa se tsamaisoa ka motlakase. Sebopeho sa Thepa kantle se theha tokomane ea CSV (lipehelo tse arohaneng) ho boloka
ebe o hlophisa data ea log.

Sheba ho log file bakeng sa lintlha ha u rarolla mathata kapa u buisana le Shure Systems Support.

1. Ho view tlaleho ea ketsahalo:
2. Bula lenane la Thuso
   Khetha View Lethathamo la Ketsahalo

Boemo ba Matla

Boitsebiso
Ketso kapa ketsahalo e phethiloe ka katleho

Tlhokomediso
Ketso e ke ke ea phethahala, empa ts'ebetso ka kakaretso e tsitsitse

Phoso
Ho hlahile bothata bo ka sitisang tšebetso.

Lintlha tsa Log

Tlhaloso
E fana ka lintlha tse mabapi le liketsahalo le liphoso, ho kenyelletsa aterese ea IP le subnet mask.

Nako Stamp
Lipotoloho tsa matla:matsatsi:lihora:metsotso:metsotsoana ho tloha ha u qala ho qala.

Ketsahalo ID
E bontša mofuta oa ketsahalo bakeng sa motho ea ka hare

Keletso: Sebelisa sefe ho fokotsa liphetho. Khetha sehlooho sa sehlopha ho hlophisa log.

Ikopanye le Tšehetso ea Bareki

Ha ua fumana seo u se hlokang? Ikopanye le tšehetso ea bareki ho fumana thuso.

Litlhaloso

Kakaretso

Lihokelo tsa Analog

Kenyeletso	(1) sehokelo sa li-pin tse 3 (E Balanced e sebetsang)
Sephetho	(1) 3-pin block sehokelo (Impedance E leka-lekane)

Lihokelo tsa USB
(1) USB 2.0, Mofuta oa B
Likhokahano tsa Marang-rang (Dante Digital Audio)
(1) RJ45
Likanale tse 4 tsa ho kenya, likanale tse 2 tsa tlhahiso

Polarity
E sa fetoheng, tlhahiso efe kapa efe ho tlhahiso efe kapa efe

Litlhoko tsa Matla
Matla holim'a Ethernet (PoE), Sehlopha sa 0. (PoE Plus e lumellana).

Tšebeliso ea Matla
6.5W, boholo

Boima ba 'mele
668 g (1.5 lbs)

Litekanyo
H x W x D
4 x 14 x 12.8 cm ( 1.6 x 5.5 x 5.0 in.)

Laola Software
Moqapi oa Shure

Sebaka sa Mocheso oa Ts'ebetso
−6.7°C (20°F) ho isa ho 40°C (104°F)

Storage Mocheso Range
−29°C (-20°F) ho isa ho 74°C (165°F)

Phello ea Matla a Mocheso

Boholo	6.8W ( 23.0BTU/hr)
tloaelehileng	6.0W ( 20.8BTU/hr)

Audio
Karabelo ea Khafetsa
+1, -1.5 dB
20 ho isa ho 20,000 Hz
Dante Digital Audio

SampLing Rate	48 kHz
Botebo bo Botle	24

USB Audio

SampLing Rate	48 kHz
Botebo bo Botle	16, 24

Ho lieha ho fihla

Ha e kenyeletse Dante latency	Analogue ho ea ho Analog	0.98 ms
	Analogue ho Dante	0.39 ms
	Dante ho Analog	0.72 ms
	Dante ho ea Dante	0.14 ms

Dynamic Range
20 Hz ho 20 kHz, A-weighted, e tloaelehileng

Analog-to-Dante	113dB
Dante-to-Analog	117dB

Kakaretso ea Khopamiso ea Harmonic
@ 1 kHz, 0 dBV Kenyeletso, 0 dB analoge phaello <0.05%

Karolelano e Tloaelehileng ea ho hana
150Ω mohloli o leka-lekaneng @ 1 kHz >70 dB
Tšitiso
10.6 lik'hilograma

Kena Boemo ba ho Clipping

Mola	-86 dBV
Aux	-98 dBV

Sephetho sa Clipping Level

Mola	+20 dBV
Aux	+0 dBV
Mic	-26 dBV

E hahiloeng ka hare ho Digital Signal Processing

Ka Channel	Equalizer (4-band Parametric, Analog le liteishene tsa tlhahiso ea USB feela) , Mute, Limiter, Gain (140 dB range)
Tsamaiso	Mohlahisi oa Matrix

Marang-rang
Litlhoko tsa Cable
Katse 5e kapa e phahameng (ho khothalletsoa thapo e sirelelitsoeng)

Lisebelisoa tsa boikhethelo le likarolo tse ncha

Boitsebiso ba Tšireletseho

BOHLOKOA POLOKETSO LITAELO

1. BALA litaelo tsena.
2. BOLOKA litaelo tsena.
3. HLOKOMELA litemoso tsohle.
4. LATELA ditaelo tsohle.
5. U SE KE UA sebelisa sesebelisoa sena haufi le metsi.
6. HLOKA FEELA ka lesela le omeletseng.
7. U SE KE UA thiba menyetla efe kapa efe ea moea. Lumella libaka tse lekaneng bakeng sa moea o lekaneng oa moea le ho kenya ho latela litaelo tsa moetsi.
8. U SE KE UA kenya haufi le mehloli efe kapa efe ea mocheso e kang malakabe a bulehileng, li-radiator, lirekoto tsa mocheso, litofo kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso. U se ke ua beha mehloli leha e le efe e bulehileng ea lelakabe sehlahisoa.
9. O SE KE oa hlola sepheo sa polokeho sa polaka ea mofuta oa polarized kapa e thehileng fatše. Polarized plug e na le li-blades tse peli tse nang le bophara bo boholo ho feta bo bong. Polaka ea mofuta oa fatše e na le li-blades tse peli le prong ea boraro ea motheo. Lehare le pharaletseng kapa prong ea boraro li fanoe molemong oa polokeho ea hau. Haeba polaka e fanoeng e sa lekane sehokelong sa hau, ikopanye le ramotlakase bakeng sa ho nchafatsa sekheo sa khale.
10. TŠIRELETSA thapo ea motlakase hore e se ke ea haptjoa kapa ea hatelloa, haholo-holo ho li-plug, lisebelisoa tse bonolo, le
    moo ba tsoang teng ka har'a lisebelisoa.
11. SEBELISA FEELA liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
    
12. SEBELISA feela ka kolotsana, setepisi, li-tripod, bracket, kapa tafole e boletsoeng ke moetsi, kapa e rekisoang ka lisebelisoa. Ha a
    ho sebelisoa kariki, ela hloko ha u tsamaisa motsoako oa kariki / lisebelisoa ho qoba ho tsoa kotsi ho tsoa holimo.
13. UNPLUG sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe nako e telele.
14. FIHLELA litšebeletso tsohle ho basebeletsi ba nang le tsebo. Ts'ebeletso ea hlokahala ha lisebelisoa li senyehile ka tsela efe kapa efe, joalo ka thapo ea phepelo ea motlakase kapa plug e senyehile, mokelikeli o tšolohile kapa lintho li oele ka har'a lisebelisoa, lisebelisoa li ne li na pula kapa mongobo, ha li sebetse ka mokhoa o tloaelehileng, kapa e theotsoe.
15. U SE KE UA pepesa lisebelisoa hore li rothe le ho faphatsa. U SE KE UA kenya lintho tse tlatsitsoeng ka maro, joalo ka linkho, holim'a lisebelisoa.
16. Plaka ea MAINS kapa sesebelisoa se kopanyang lisebelisoa li tla lula li sebetsa habonolo.
17. Lerata la moea la Apparatus ha le fete 70dB (A).
18. Lisebelisoa tse nang le moaho oa CLASS I li tla hokahana le sehokelo sa sokete sa MAINS se nang le khokahano e sireletsang ea lefatše.
19. Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.
20. Seke oa leka ho fetola sehlahisoa sena. Ho etsa joalo ho ka baka kotsi ea motho le/kapa ho hloleha ha sehlahisoa.
21. Sebetsa sehlahisoa sena ka har'a mocheso oa mocheso o boletsoeng

	Letšoao lena le bontša hore voltage etsa hore ho be le kotsi ea ho tsosoa ke motlakase e teng ka har'a yuniti ena.
	Letšoao lena le bontša hore ho na le litaelo tsa bohlokoa tsa ho sebetsa le tsa tlhokomelo libukeng tse tsamaeang le yuniti ena.

Lintlha tsa bohlokoa tsa Sehlahisoa
Thepa e reretsoe ho sebelisoa lits'ebetsong tsa mamelwang tsa profeshenale.Hlokomela: Sesebediswa sena ha se a rerelwa ho hokelwa ka kotloloho marangrang a marangrang a setjhaba.EMC conformance to Environment E2: Commercial and Light Industrial. Teko e ipapisitse le ts'ebeliso ea mefuta ea li-cable e fanoeng le e khothaletsoang. Tšebeliso ea mefuta e meng ea lithapo tse sirelelitsoeng (e sirelelitsoeng) e ka nyenyefatsa ts'ebetso ea EMC. Liphetoho kapa liphetoho tse sa amoheloang ka ho hlaka ke Shure Incorporated li ka senya matla a hau a ho sebelisa thepa ena.
Indasteri Canada ICES-003 Compliance Label: E KA KHOA KE ICES-3 (B)/NMB-3(B
) E lumellotsoe tlas'a tokiso ea netefatso ea FCC Karolo ea 15B. Ka kopo, latela leano la sebaka sa hau sa ho sebelisa libeteri, liphutheloana le litšila tsa elektroniki. Dante ke lets'oao le ngolisitsoeng la Audinate Pty Ltd.

Boitsebiso ho mosebedisi
Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo ea moetsi, e ka baka tšitiso ea ho amohela seea-le-moea le thelevishene.

Tlhokomeliso: Melao ea FCC e fana ka hore liphetoho kapa litokiso tse sa amoheloang ka kotloloho ke Shure Incorporated li ka hlakola matla a hau a ho sebelisa sesebelisoa sena.

Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa le seketsoaneng sa potoloho se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso

Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Phatlalatso ea CE ea Conformity e ka fumaneha ho: www.shure.com/europe/compliance
Moemeli ea lumelletsoeng oa Europe: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Jeremane
Mohala: +49-7262-92 49 0
Lengolo-tsoibila: lintlha@shure.de www.shure.com

Sehlahisoa sena se kopana le Litlhokahalo tsa Bohlokoa tsa litaelo tsohle tse amehang tsa Europe mme se lokeloa ho tšoaea CE.

Phatlalatso ea CE ea Conformity e ka fumanoa ho Shure Incorporated kapa leha e le efe ea baemeli ba eona ba Europe. Bakeng sa lintlha tsa ho ikopanya ka kopo etela www.shure.com

 

 

 

 

Litokomane / Lisebelisoa

	SHURE ANIUSB Matrix Audio Network Interface [pdf] Bukana ea Mosebelisi ANIUSB Matrix Audio Network Interface, ANIUSB, Matrix Audio Network Interface, Audio Network Interface, Network Interface, Interface
	SHURE ANIUSB-Matrix Audio Network Interface [pdf] Bukana ea Mosebelisi ANIUSB-Matrix Audio Network Interface, ANIUSB-Matrix, Audio Network Interface, Network Interface

Litšupiso

• Bukana ea Mosebelisi