E Series Pontšo ea Sebopeho se Seholo

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Sehlahisoa: Taolo ea Kantle Large Format Display E letoto
  E758/E868
• Mekhoa ea puisano: RS-232C Taolo ea hole, taolo ea LAN
• Likarolo tsa puisano:
  • RS-232C Taolo ea Remoutu:
    • Mokhoa oa puisano: Asynchronous RS-232C
    • Sebopeho: 9-pin D-Sub Cross (reversed) cable kapa null modem
      thapo
    • Sekhahla sa Baud: 9600bps
    • Bolelele ba data: li-bits tse 8
    • Parity: Ha ho letho
    • Stop Bit: 1 bit
    • Khoutu ea Khokahano: ASCII
  • Taolo ea LAN:
    • Sistimi ea puisano: TCP/IP (Internet protocol suite)
    • Sehokelo: Ethernet (CSMA/CD)
    • Lera la Lipuisano: Lera la Lipalangoang (TCP)
    • Aterese ea IP: DHCP: E Buletsoe (Ka ho sa Feleng)
    • Nomoro ea Boema-kepe: 7142 (E Tsitsitseng)

Litaelo tsa Tšebeliso ea Sehlahisoa

1. Lihokelo le Wiring

1.1. Taolo ea Remoutu ea RS-232C

Ho laola leihlo la NEC LCD ka RS-232C Remote control,
latela mehato ena:

1. Hokela sebali ho molaoli o sebelisa 9-pin D-Sub Cross
   (reversed) cable kapa null modem cable.
2. Sheba bukana ea Mosebelisi bakeng sa litaelo tse qaqileng ka
   ho laola leihlo la LCD ka RS-232C Remote control.

1.2. Taolo ea LAN

Ho laola leihlo la NEC LCD ka taolo ea LAN, latela tsena
mehato:

1. Hokela sebali ho molaoli o sebelisa RJ-45 10/100
   Sehlopha sa 5 sa cable ea LAN ea BASE-T kapa ho feta.
2. Sheba bukana ea Mosebelisi bakeng sa litaelo tse qaqileng ka
   ho laola leihlo la LCD ka taolo ea LAN.

2. Nako ea Puisano

2.1. Taolo ea Remoutu ea RS-232C

Mookameli o lokela ho emela pakete ea karabo pele a romela
taelo e latelang. Litaelo tse latelang li na le ho ema ho itseng
linako:

• Matla, Matla a tima: Ema metsotsoana e 15 ka mor'a ho amohela
  araba taelo pele o romela taelo e latelang.
• Kenyelletso, Kenyo ea PIP, Ho seta ka Otho, Ho seta Fektheri bocha: Emela 10
  metsotsoana ka mor'a ho amohela taelo ea karabo pele u romela e latelang
  laela.

2.2. Taolo ea LAN

Sesebelisoa se tla hakolla khokahano haeba ho se na data ea pakete
e amohetse metsotso e 15. Kamora metsotso e 15 kapa ho feta, molaoli
(PC) e hloka ho hokela hape ho laola sebali hape.

FAQ (Lipotso Tse Botsoang Hangata)

P: Nka fetola boemo ba Backlight joang?

A: Ho fetola maemo a Backlight, latela mehato ena:

1. Sheba karolo ea 6.1 bukeng ea buka ea mosebelisi bakeng sa e tloaelehileng
   mokhoa exampsheba mokhoa oa ho fetola maemo a Backlight.

P: Ke bala joang boleng ba tekanyo ea mohaho o hahiloeng
lisensara tsa mocheso?

A: Ho bala boleng ba tekanyo ea mocheso o hahiloeng
Li-sensor, latela mehato ena:

1. Sheba karolo ea 6.2 bukeng ea buka ea mosebelisi bakeng sa e tloaelehileng
   mokhoa example mabapi le mokhoa oa ho bala tekanyo ea boleng ba
   li-sensor tsa mocheso tse hahiloeng.

span class='title' style='pontšo: ha ho letho;'>
Taolo ea Kantle
Large Format Display E letoto la lihlooho tse
E758/E868
/

span class='title' style='pontšo: ha ho letho;'>
Taolo ea Kantle
1. Kopo 2. Lihokelo le lithapo
2.1. RS-232C Taolo ea Remoutu 2.2. Taolo ea LAN 3. Parameter ea Puisano 3.1. RS-232C Taolo ea hole
3.1.1. Nako ea puisano 3.2. Taolo ea LAN
3.2.1. Nako ea puisano 4. Sebopeho sa Puisano
4.1. Sebopeho sa block block (bolelele bo tsitsitseng) 4.1.1. Sebopeho sa hlooho
4.2. Sebopeho sa thibelo ea melaetsa 4.2.1. Fumana parameter ea hona joale 4.2.2. Fumana karabo ea Paramethara 4.2.3. Beha paramethara 4.2.4. Beha karabo ea Paramethara 4.2.5. Taelo 4.2.6. Laela karabo
4.3. Lekola khoutu 4.3.1. E hlophisitsoeng le ho bala.
4.4. Delimiter 5. Mofuta oa molaetsa
5.1. Fumana Paramethara ea hajoale ho tsoa ho sebali 5.1.1. Fumana sebopeho sa hajoale sa parametha
5.2. "Fumana parameter" karabo 5.2.1. Fumana sebopeho sa karabo ea paramethara
5.3. Beha paramethara 5.3.1. Beha sebopeho sa paramethara
5.4. "Seta paramethara" karabo 5.4.1. Seta sebopeho sa karabo ea paramethara
5.5. Litaelo 5.5.1. Boloka Litlhophiso tsa Hona Joale 5.5.2. Fumana Tlaleho ea Nako le Karabo ea Nako 5.5.3. Molaetsa o NTLE
6. Mokhoa o tloaelehileng mohlalaample 6.1. Mokhoa oa ho fetola maemo a "Backlight". 6.2. Mokhoa oa ho bala boleng ba tekanyo ea li-sensor tsa mocheso tse hahiloeng.
7. CTL e laela Taelo ea Tsamaiso CTL-0C. Boloka Litlhophiso tsa Hona Joale CTL-07. Fumana Tlaleho ea Nako le Karabo ea Nako Mokhoa oa ho laola matla CTL-01D6. Boemo ba matla ba ho bala
/

span class='title' style='pontšo: ha ho letho;'>
CTL-C203-D6. Taolo ea matla Serial No. & Model Name Bala
CTL-C216. Lethathamo la No. Bala CTL-C217. Lebitso la Mohlala Bala Aterese ea MAC Bala Kopo & Araba CTL-C220. Aterese ea MAC Bala Kopa Khoutu ea Boitsebiso ba Remote Control e romela sebopeho ka RS-232C CTL-C210. Remote Control Data Code ho romela sebopeho ka RS-232C Firmware Version Command CTL-CA02. Firmware Version Bala Kopo CTL-CA04-03. Lebitso le Kenang la Terminal e Behiloeng Kopo ea Bala CTL-CA04-04. Lebitso le Kenang la Terminal e Behiloeng ea Ngola Kopo CTL-CA04-05. Kena Lebitso la Kopo e Behiloeng ea ho Seta Botjha ha Terminal 8. Lenane la OSD le tafole ya ho bapisa bakeng sa taelo ka nngwe
/

span class='title' style='pontšo: ha ho letho;'>

1. Kopo

Tokomane ena e hlalosa mokhoa oa puisano bakeng sa taolo ea leihlo la NEC LCD, ha o sebelisa molaoli oa kantle.

2. Lihokelo le lithapo

2.1. RS-232C Taolo ea hole

(1) Sehokedi (2) Cable

9-pin thapo ya D-Sub Cross (reversed) kapa null modem cable

(Ka kopo, sheba "Ho Laola sebali sa LCD ka RS-232C Remote Control" bukeng ea Mosebelisi.)
/

span class='title' style='pontšo: ha ho letho;'>
2.2. Taolo ea LAN
(1) Sehokedi (2) Cable

RJ-45 10/100 BASE-T Sehlopha sa 5 kapa ho feta thapo ea LAN

(Ka kopo, sheba "Ho laola sebali sa LCD ka taolo ea LAN" ho Buka ea Mosebelisi.)
/

span class='title' style='pontšo: ha ho letho;'>

3. Parameter ea Puisano

3.1. RS-232C Taolo ea hole

(1) Sistimi ea puisano (2) Sehokelo (3) Sekhahla sa Baud (4) Bolelele ba data (5) Parity (6) Stop bit (7) Khoutu ea puisano

Asynchronous RS-232C 9600bps 8bits None 1 bit ASCII

3.1.1. Nako ea puisano

Molaoli o lokela ho emela pakete ea karabo pele taelo e latelang e romelloa. (Tlhokomeliso) Ha litaelo tse latelang li romelloa, molaoli o lokela ho emela nako e itseng ka mor'a ho fumana taelo ea karabo pele a romela taelo e latelang.
Ho Bula, ho tima Matla: Kenyeletso ea metsotsoana e 15, Kenyeletso ea PIP, Ho seta ka Motlakase, Reset ea fektheri: metsotsoana e 10

3.2. Taolo ea LAN

(1) Tsamaiso ea puisano (2) Sehokelo (3) Lera la puisano
(4) Aterese ea IP
(5) Boema-kepe No.

TCP/IP (Internet protocol suite) Ethernet (CSMA/CD) Lera la dipalangwang (TCP) * Ho sebedisa phallo ya karolo ya TCP. (Default) DHCP:On * Haeba o hloka ho fetoha,
Ka kopo sheba "Litlhophiso tsa Network" ho Buka ea Mosebelisi. 7142 (E tsitsitse)

Hlokomela

Sebapali se tla khaola khokahano haeba ho se na data ea pakete e amoheloang ka metsotso e 15. 'Me molaoli (PC) o tlameha ho hokahanya hape ho laola leihlo hape, kamora metsotso e 15 kapa ho feta.

3.2.1. Nako ea puisano

Molaoli o lokela ho emela pakete ea karabo pele taelo e latelang e romelloa. (Tlhokomeliso) Ha litaelo tse latelang li romelloa, molaoli o lokela ho emela nako e itseng ka mor'a ho fumana taelo ea karabo pele a romela taelo e latelang.
Ho Bula, ho tima Matla: Kenyeletso ea metsotsoana e 15, Kenyeletso ea PIP, Ho seta ka Motlakase, Reset ea fektheri: metsotsoana e 10

/

span class='title' style='pontšo: ha ho letho;'>

4. Sebopeho sa Puisano

Ho na le mefuta e 'meli ea litaelo tsa taolo ea kantle: VCP le CTL. Taelo e na le likarolo tse 'nè: Header, Message, Check code, le Delimiter. Likahare tsa Molaetsa lia fapana ho latela mofuta oa taelo.

Hlooho

Molaetsa

Sheba Code Delimiter

Latela litaelo tse ka tlase bakeng sa tlhahisoleseling e 'ngoe le e 'ngoe. Melaetsa le likarolo tse ling tse tloaelehileng tsa taelo ea VCP li hlalositsoe khaolong ena. Tlhaloso e felletseng ea molaetsa oa taelo ea VCP
Sheba karolo ea 4.2. Sebopeho sa thibelo ea melaetsa Tlhaloso e qaqileng ea molaetsa oa taelo ea CTL
Sheba karolo ea 7. Litaelo tsa CTL

/

span class='title' style='pontšo: ha ho letho;'>

4.1. Sebopeho sa li-header block (bolelele bo tsitsitseng)
| Hlooho | Molaetsa | Sheba Khoutu | Delimiter | 4.1.1. Sebopeho sa hlooho

SOH

Molaetsa oa Mohloli oa Mohloli oa Sebaka se bolokiloeng

'0'

Mofuta

Bolelele

Ea pele

Ea bobeli

Ea boraro

Ea bo4

Ea bo5

6th-7th

1st) SOH: Qalo ea Sehlooho sa ASCII SOH (01h)

2nd) E bolokiloe: E boloketsoe katoloso ea nako e tlang. Homonitor ena, e tlameha ho ba ASCII '0' (30h).

3rd) Sebaka: ID ea lisebelisoa tsa sebaka. (Moamoheli) Hlalosa aterese ea moamoheli oa litaelo. Boleng bona bo tlameha ho ts'oana le "MONITOR ID" e behiloeng ho OSD. Ha u araba, sebali se beha '0' (30h), kamehla.

4th) Mohloli: ID ea lisebelisoa tsa mohloli. (Moromelli) Hlalosa aterese ea moromelli. Molaoli o tlameha ho ba '0' (30h). Ha u araba, sebali se ipehela MONITOR ID mona.

5th) Mofuta oa Molaetsa: (Litaba tse bonolo.) Sheba karolo ea 4.2 "Molaetsa thibela sebopeho" bakeng sa lintlha tse ling. ASCII ‘A’ (41h): Taelo. ASCII ‘B’ (42h): Karabo ea taelo. ASCII ‘C’ (43h): Fumana paramethara ea hajoale ho tsoa ho sebali. ASCII ‘D’ (44h): “Fumana paramethara” karabo. ASCII ‘E’ (45h): Beha parameter. ASCII ‘F’ (46h): “Seta paramethara” karabo.

6th -7th) Bolelele ba Molaetsa: Hlalosa bolelele ba molaetsa (o latelang hlooho) ho tloha STX ho ea ETX. Bolelele bona bo kenyelletsa STX le ETX. Lintlha tsa byte li tlameha ho ngolisoa ho litlhaku tsa ASCII.
Ex.) Lintlha tsa byte 3Ah li tlameha ho kenngoa ho litlhaku tsa ASCII '3' le 'A' (33h le 41h). Lintlha tsa byte 0Bh li tlameha ho khoutooa ho litlhaku tsa ASCII '0' le 'B' (30h le 42h).

/

span class='title' style='pontšo: ha ho letho;'>

Tafole ea phetoho ea "MONITOR ID" ho "Destination Address" e tjena,

Lekola Sebaka seo U eang ho sona

ID

Aterese

1

41h('A')

2

42h('B')

3

43h('C')

4

44h('D')

5

45h('E')

6

46h('F')

7

47h('G')

8

48h('H')

9

49h('ke')

10

4 Ah('J')

11

4Bh('K')

12

4Ch('L')

13

4Dh('M')

14

4Eh('N')

15

4Fh('O')

16

50h('P')

17

51h('Q')

18

52h('R')

19

53h('S')

20

54h('T')

21

55h('U')

22

56h('V')

23

57h('W')

24

58h('X')

25

59h('Y')

TSOHLE

2 Ah('*')

Lekola Sebaka seo U eang ho sona

ID

Aterese

26

5Ah('Z')

27

5Bh

28

5Bit

29

5Dh

30

5Eh

31

5Fh

32

60h

33

61h

34

62h

35

63h

36

64h

37

65h

38

66h

39

67h

40

68h

41

69h

42

6Ah

43

6Bh

44

6Bit

45

6Dh

46

6Eh

47

6Fh

48

70h

49

71h

50

72h

Lekola Sebaka seo U eang ho sona

ID

Aterese

51

73h

52

74h

53

75h

54

76h

55

77h

56

78h

57

79h

58

7Ah

59

7Bh

60

7Bit

61

7Dh

62

7Eh

63

7Fh

64

80h

65

81h

66

82h

67

83h

68

84h

69

85h

70

86h

71

87h

72

88h

73

89h

74

8Ah

75

8Bh

Lekola Sebaka seo U eang ho sona

ID

Aterese

76

8ch

77

8Dh

78

8Eh

79

8Fh

80

90h

81

91h

82

92h

83

93h

84

94h

85

95h

86

96h

87

97h

88

98h

89

99h

90

9Ah

91

9Bh

92

9Bit

93

9Dh

94

9Eh

95

9Fh

96

A0h

97

A1h

98

A2h

99

A3h

100

A4h

/

span class='title' style='pontšo: ha ho letho;'>

4.2. Sebopeho sa thibelo ea melaetsa
| Hlooho | Molaetsa | Sheba Khoutu | Delimiter | "Molaetsa block block" e hokahana le "Mofuta oa Molaetsa" ho "Header". Sheba karolo ea 4.1 "Sebopeho sa "Header block" bakeng sa lintlha tse ling.
4.2.1. Fumana parameter ea hona joale
Molaoli o romella molaetsa ona ha o batla ho fumana boemo ba sebali. Bakeng sa boemo boo u batlang ho bo fumana, bolela "leqephe la khoutu ea OP" le "OP code", sheba khaolo ea 8. "Molaetsa oa sebopeho" oa "Fumana parameter ea hona joale" e tjena.
4.2.1.1. Fumana sebopeho sa hajoale sa parametha

STX OP Code OP Code ETX

Leqephe

Hi Lo Hi Lo

Sheba karolo ea 5.1 "Fumana paramethara ea hajoale ho tsoa ho sesebelisoa." bakeng sa lintlha tse ling. 4.2.2. Fumana karabo ea Parameter Mohlokomeli o tla araba ka boemo ba ntho e kōptjoang e boletsoeng ke molaoli ho "Fumana molaetsa oa parameter". "Molaetsa sebopeho" sa "Fumana karabo ea paramethara" ke ka tsela e latelang.
4.2.2.1. Fumana mofuta oa karabo oa Parameter

Sephetho sa STX OP Code OP Code Mofuta oa Boleng Bo phahameng Boleng ba Hajoale ETX

Leqephe

Hi Lo Hi Lo Hi Lo Hi Lo MSB …LSB MSB …LSB

Sheba karolo ea 5.2 "Fumana karabo ea parameter" bakeng sa lintlha tse ling.

/

span class='title' style='pontšo: ha ho letho;'>

4.2.3. Beha parameter
Selaoli se romella molaetsa ona ho fetola maemo a mochini. Sebopeho sa molaetsa oa "Set parameter" ke ka tsela e latelang.
4.2.3.1. Beha sebopeho sa paramethara

STX OP Code OP Code Beha boleng ETX

Leqephe

Hi Lo Hi Lo MSB …LSB

Sheba karolo ea 5.3 "Seta paramethara" bakeng sa lintlha tse ling. 4.2.4. Seta karabo ea Paramethara Mohlokomeli o araba ka molaetsa ona bakeng sa netefatso ea "Seta molaetsa oa parametha". Sebopeho sa molaetsa oa "Set parameter reply" ke ka tsela e latelang.
4.2.4.1. Seta sebopeho sa karabo ea paramethara

Sephetho sa STX OP Code OP Code Type Boleng ba boleng bo Kopuoeng

ETX

Leqephe

Ho beha Boleng

Hi Lo Hi Lo Hi Lo Hi Lo MSB …LSB MSB …LSB

Sheba karolo ea 5.4 "Seta karabo ea paramethara" bakeng sa lintlha tse ling.
4.2.5. Taelo
Sebopeho sa "Molaetsa oa Taelo" se ipapisitse le taelo ka 'ngoe. Hangata, "molaetsa oa taelo" o sebelisoa bakeng sa li-control tse ling tse sa thellang le lits'ebetso tse ling tse khethehileng, joalo ka "Boloka litlhophiso tsa hajoale", "Fumana tlaleho ea nako", "Taolo ea matla", "Shejule", joalo-joalo. Sheba karolo ea 5.5 " E laela molaetsa" bakeng sa lintlha tse ling.
4.2.6. Laela karabo
Mohlahlobi o araba potso e tsoang ho molaoli. Sebopeho sa "Command reply" se ipapisitse le taelo ka 'ngoe. Sheba karolo ea 5.5 "Molaetsa oa litaelo" bakeng sa lintlha tse ling.

/

span class='title' style='pontšo: ha ho letho;'>

4.3. Hlahloba khoutu
| Hlooho | Molaetsa | Sheba khoutu | Delimiter |
4.3.1. E hlophisitsoeng le ho bala.
Sebelisa setšoantšo se ka tlase ho ithuta hore na khoutu ea cheke e hlophisoa joang le ho baloa joang. Ntlha ea pele, beha mokhoa oa ho hlahloba khoutu ka mor'a ETX ka taelo. Ka hona, beha khoutu ea ho hlahloba sebakeng sa "D9" setšoantšong se ka tlase.

Hlooho

Molaetsa

SOH Resv.Dest Src Type Length STX Data - - ETX Hlahloba khoutu

D0 D1 D2 D3 D4 D5 D6 D7 – D8 D9

E latelang, joalo ka exampea ho bala Hlahloba khoutu, etsa kakaretso ea litekanyetso tse thathamisitsoeng kaholimo ho kholomo ka 'ngoe ho tloha ho 'D1' ho ea ho 'D16' setšoantšong se ka tlase. Ka hona, re bala kakaretso ea boleng ho tloha ho '30' (30h) ho ea ho '03' (03h) setšoantšong se ka tlase. Ka lebaka la palo, cheke khoutu ea taelo setšoantšong se ka tlase ke '77′(77h), kahoo e behe ho Hlahloba khoutu.
Khoutu ea ho hlahloba e ka hlalosoa e le Block Check Code (BCC) ho lintlha tsa taelo tse hlalositsoeng ka tlase.

Hlooho

Molaetsa

CheckDelimiter

khoutu

SOHResv.DestSrcTypeLength STXOP Code PageOP Code Set Value ETX(BCC)

01h 30h 41h30h 45h30h41h02h 30h 30h 31h30h30h30h36h34h03h 77h 0Dh

D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10D11D12D13D14D15D16 D17 D18

Cheke khoutu (BCC) D17 = D1 xor D2 xor D3 xor … xor D14 xor D15 xor D16 = 30h xor 41h xor 30h xor 45h xor 30h xor 41h xor 02h 30h xor 30h 31 xor 30 xor 30 xor 30 r36h xor 34h = 03h

4.4. Delimiter
| Hlooho | Molaetsa | Sheba khoutu | Delimiter |
Delimiter ha e na lifomate le lipalo tse hlalositsoeng ho fihlela joale. Hlalosa 'CR'(0Dh) ho ASCII bakeng sa Delimiter ea Taelo.

/

span class='title' style='pontšo: ha ho letho;'>

5. Mofuta oa molaetsa

5.1. Fumana Parameter ea hajoale ho tsoa ho sebali
5.1.1. Fumana sebopeho sa hajoale sa parametha

STX OP Code OP Code ETX

Leqephe

Hi Lo Hi Lo

Ea pele ea 1 - 2 ea 3 - 4th 5th

Romela molaetsa ona ha o batla ho fumana boemo ba sehlahlobi.
Bakeng sa boemo boo u batlang ho bo fumana, bolela "leqephe la khoutu ea OP" "OP code", sheba khaolo ea 8.
* 1st byte) STX: Qalo ea Molaetsa ASCII STX (02h)
* Li-byte tsa 2nd-3rd) Leqephe la khoutu ea OP: Leqephe la khoutu ea ts'ebetso. Hlalosa "leqephe la khoutu ea OP" bakeng sa taolo eo u batlang ho fumana boemo. Sheba khaolo ea 8 bakeng sa ntlha ka ’ngoe. Lintlha tsa leqephe la khoutu ea OP li tlameha ho kengoa ho litlhaku tsa ASCII.
Ex.) Lintlha tsa li-byte 02h li tlameha ho kenngoa ho litlhaku tsa ASCII '0' le '2' (30h le 32h). OP code page 02h -> OP code page (Hi) = ASCII ‘0’ (30h) OP code page (Lo) = ASCII ‘2’ (32h) Sheba khaolo ea 8.
* 4th-5th byte) Khoutu ea OP: Khoutu ea ts'ebetso Sheba "VcpTable" bakeng sa ntho ka 'ngoe. Lintlha tsa OP code li tlameha ho kengoa ho litlhaku tsa ASCII.
Ex.) Lintlha tsa byte 3Ah li tlameha ho kenngoa ho litlhaku tsa ASCII '3' le 'A' (33h le 41h). OP khoutu 3Ah -> OP khoutu (Hi) = ASCII ‘3’ (33h) OP khoutu (Lo) = ASCII ‘A’ (41h) Sheba khaolo ea 8.
* 6th byte) ETX: Qetello ea Molaetsa ASCII ETX (03h)

/

span class='title' style='pontšo: ha ho letho;'>

5.2. "Fumana parameter" karabo
5.2.1. Fumana sebopeho sa karabo ea paramethara

Sephetho sa STX OP Code OP Code Mofuta oa Boleng Bo phahameng Boleng ba Hajoale ETX

Leqephe

Hi Lo Hi Lo Hi Lo Hi Lo MSB …LSB MSB …LSB

La 1 la 2-3 la 4-5th la 6-7 la bo8-9

Mohlahlobi o araba ka boleng ba hona joale le boemo ba ntho e batloang (khoutu ea ts'ebetso).

* 1st byte) STX: Qalo ea Molaetsa ASCII STX (02h)
* 2nd-3rd byte) Sephetho: Khoutu ea sephetho. Li-byte tsena li bontša sephetho sa litaelo tse kopiloeng ka tsela e latelang. 00h: Ha ho Phoso. 01h: Ts'ebetso e sa tšehetsoeng ka mochine ona kapa ts'ebetso e sa tšehetsoeng tlas'a maemo a hona joale. Khoutu ena ea sephetho e tsoang ho sebali e kentsoe ho litlhaku tsa ASCII.
Ex.) Boitsebiso ba byte 01h bo kentsoe ho ASCII tlhaku '0' le '1' (30h le 31h).
* 4th-5th byte) Leqephe la khoutu ea OP: Leqephe la khoutu ea ts'ebetso. Li-byte tsena li bontša leqephe la khoutu ea OP ea ntho e arabang. Boleng bona bo khutlisitsoeng ho tsoa ho sebali bo kentsoe ka har'a litlhaku tsa ASCII.
Ex.) Lintlha tsa byte 02h li kentsoe ho ASCII tlhaku '0' le '2' (30h le 32h). Sheba "VcpTable".
* 6th-7th byte) Khoutu ea OP: Khoutu ea ts'ebetso Li-byte tsena li bontša OP khoutu ea ntho e arabang. Boleng bona bo khutlisitsoeng ho tsoa ho sebali bo kentsoe ka har'a litlhaku tsa ASCII. Sheba "VcpTable".
Ex.) The data byte 1Ah e kentsoe ho ASCII tlhaku '1' le 'A' (31h le 41h).
* 8th-9th bytes) Mofuta: Khoutu ea mofuta oa ts'ebetso 00h: Beha paramente 01h: Nakoana Joalo ka ts'ebetso ea Auto Setup e fetolang parameter ka bo eona. Boleng bona bo khutlisitsoeng ho tsoa ho sebali bo kentsoe ka har'a litlhaku tsa ASCII.
Ex.) Boitsebiso ba byte 01h bo kentsoe ho ASCII tlhaku '0' le '1' (30h le 31h).
* 10th-13th byte) Max. boleng: Bongata ba boleng bo ka amoheloang. (16bits) Boleng bona bo khutlisitsoeng ho tsoa ho sebali bo kentsoe ka har'a litlhaku tsa ASCII.
Ex.) '0','1′,'2′ le '3' e bolela 0123h (291)
* 14th-17th bytes) Boleng ba Hajoale: (16bits) Theko ena e khutlisitsoeng ho tsoa ho sehlahlobi e kentsoe litlhaku ho ASCII.
Ex.) '0','1′,'2′ le '3' e bolela 0123h (291)
* 18th byte) ETX: Qetello ea Molaetsa ASCII ETX (03h)

/

span class='title' style='pontšo: ha ho letho;'>

5.3. Beha parameter
5.3.1. Beha sebopeho sa paramethara

STX OP Code OP khoutu

Beha boleng

ETX

Leqephe

Hi Lo Hi Lo MSB

LSB

1st 2nd-3rd 4th-5th

6th-9th

Ea bo10

Romella molaetsa ona ho fetola tokiso ea monitor joalo-joalo. Molaoli o kopa sebali ho fetola boleng.

* 1st byte) STX: Qalo ea Molaetsa ASCII STX (02h)
* 2nd-3rd byte) Leqephe la khoutu ea OP: Leqephe la khoutu ea ts'ebetso Lintlha tsena tsa leqephe la khoutu ea OP li tlameha ho kengoa ho litlhaku tsa ASCII. Ex.) Lintlha tsa byte 02h li tlameha ho kenngoa ho ASCII '0' le '2' (30h le 32h). Sheba "VcpTable".
* 4th-5th byte) Khoutu ea OP: Khoutu ea ts'ebetso Lintlha tsena tsa khoutu ea OP li tlameha ho kengoa ho litlhaku tsa ASCII. Ex.) OP khoutu 1Ah -> OP khoutu (Hi) = ASCII '1' (31h) OP khoutu (Lo) = ASCII 'A' (41h) Sheba "VcpTable".
* 6th-9th byte) Boleng ba seta: (16bit) Lintlha tsena li tlameha ho khoutooa ho litlhaku tsa ASCII. Ex.) 0123h -> 1st(MSB) = ASCII ‘0’ (30h) 2nd = ASCII ‘1’ (31h) 3rd = ASCII ‘2’ (32h) 4th(LSB) = ASCII ‘3’ (33h)
* 10th byte) ETX: Qetello ea Molaetsa ASCII ETX (03h)

/

span class='title' style='pontšo: ha ho letho;'>

5.4. "Seta paramethara" karabo
5.4.1. Seta sebopeho sa karabo ea paramethara

Sephetho sa STX OP Code OP Code Type Boleng ba boleng bo Kopuoeng

ETX

Leqephe

Ho beha Boleng

Hi Lo Hi Lo Hi Lo Hi Lo MSB …LSB MSB …LSB

La 1 la 2-3 la 4-5th la 6-7-la-8-9-ea-10-13

Monitor e pheta paramethara le boemo ba khoutu ea ts'ebetso e kopiloeng.

* 1st byte) STX: Qalo ea Molaetsa ASCII STX (02h)
* Li-byte tsa 2-3rd) Khoutu ea sephetho ASCII ‘0”0’ (30h, 30h): Ha ho Phoso. ASCII '0"1' (30h, 31h): Ts'ebetso e sa tšehetsoeng ka mochine ona kapa o sa tšehetsoeng tlas'a
boemo ba hajoale.
* 4th-5th byte) Leqephe la khoutu ea OP: E pheta leqephe la khoutu ea Ts'ebetso bakeng sa netefatso. Lintlha tsa karabo ho tsoa ho sebali li kentsoe ho litlhaku tsa ASCII.
Ex.) Leqephe la khoutu ea OP 02h -> OP code page = ASCII '0' le '2' (30h le 32h) Sheba "VcpTable".
* 6th-7th byte) Khoutu ea OP: E pheta khoutu ea Ts'ebetso bakeng sa netefatso. Lintlha tsa karabo ho tsoa ho sebali li kentsoe ho litlhaku tsa ASCII.
Ex.) OP khoutu 1Ah -> OP khoutu (Hi) = ASCII '1' (31h) OP khoutu (Lo) = ASCII 'A' (41h) Sheba "VcpTable".
* 8th-9th bytes) Mofuta: Khoutu ea mofuta oa ts'ebetso ASCII ‘0”0’ (30h, 30h): Beha parameter ASCII ‘0”1’ (30h, 31h): Momentary Like Auto Setup function, e fetolang paramethara ka bo eona.
* 10th-13th byte) Max. boleng: Bongata ba boleng bo ka amoheloang. (16bits) Lintlha tsa karabo ho tsoa ho sebali li kentsoe ho litlhaku tsa ASCII.
Ex.) '0”1”2”3' e bolela 0123h (291)
* 14th-17th bytes) Ho kopa maemo Boleng: Echoes morao paramethara bakeng sa netefatso. (16bits) Lintlha tsa karabo ho tsoa ho sebali li kentsoe ho litlhaku tsa ASCII.
Ex.) ‘0”1”2”3′ e bolela 0123h (291)
* 18th byte) ETX: Qetello ea Molaetsa ASCII ETX (03h)

/

span class='title' style='pontšo: ha ho letho;'>

5.5. Litaelo
"Molaetsa oa taelo" o ipapisitse le taelo ka 'ngoe. 5.5.1. Boloka Litlhophiso tsa Hona Joale Molaoli o kopa hore sebatli se boloke boleng bo fetotsoeng.
5.5.1.1. Sebopeho

STX Command Code ETX

'0' 'C'

Romela “OC”(30h, 43h) joalo ka Boloka taelo ea li-setting tsa hajoale. Tlatsa pakete ea taelo ea "Save Current setting" ka tsela e latelang.

ASCII : 01h-30h-41h-30h-41h-30h-34h-02h-30h-43h-03h-CHK-0Dh SOH-‘0’-‘A’-‘0’-‘A’-‘0’-‘4’-STX-‘0’-‘C’-ETX-CHK-CR
Mohlokomeli o araba pakete bakeng sa netefatso ka tsela e latelang. SOH-'0'-'0'-'A'-'B'-'0'-'6'-STX-'0'-'0'-'0'-'C'-ETX-CHK- CR

/

span class='title' style='pontšo: ha ho letho;'>

5.5.2. Fumana Tlaleho ea Nako le Karabo ea Nako Molaoli o kopa sebali ho tlaleha nako ea setšoantšo se bontšitsoeng.

STX Command Code ETX

'0''7'

Romela "07"(30h, 37h) joalo ka taelo ea Fumana Tlaleho ea Nako. Tlatsa pakete ea taelo ea "Fumana Nako ea Nako" ka tsela e latelang.

ASCII : 01h-30h-41h-30h-41h-30h-34h-02h-30h-37h-03h-CHK-0Dh SOH-‘0’-‘A’-‘0’-‘A’-‘0’-‘4’-STX-‘0’-‘7’-ETX-CHK-CR

Mohlahlobi o araba boemo e le mokhoa o latelang.

Taelo ea STX

SS

H Freq.

V Freq.

ETX

‘4’ ‘E’ Dumela Lo MSB

LSB MSB

LSB

* SS: Boemo ba nako

Bit 7 = 1 : Sync Frequency e tsoile sebakeng.

Bit 6 = 1 : Palo e sa tsitsang

Linyane 5-2

E bolokiloe (Ha u tsotelle)

hanyane 1

1:Positive Horizontal sync polarity.

0: Negative Horizontal sync polarity.

hanyane 0

1:Positive Vertical sync polarity.

0:Polarity e nyahamisang ea Negative Vertical.

* H Maqhubu: Maqhubu a Tshekaletseng a yuniti 0.01kHz * V Freq: Maqhubu a Emeng a yuniti 0.01Hz
Ex.) Ha H Freq e le ‘1”2”A”9′ (31h, 32h, 41h, 39h), e bolela 47.77kHz.

/

span class='title' style='pontšo: ha ho letho;'>

5.5.3. Molaetsa o NTLE
5.5.3.1. Sebopeho

STX Command Code ETX

'B' 'E'

Molaetsa oa NULL o khutlisitsoeng ho tsoa ho sebali o sebelisoa maemong a latelang.

* Phoso ea nako e etsahetse. (Nako ea ho felloa ke nako ke 10sec.) * Mohlahlobi o fumana mofuta oa molaetsa o sa tšehetsoeng. * Sebali se fumana phoso ea pakete ea BCC (Block Check Code). * Ho bolella molaoli hore leihlo ha le na karabo leha e le efe eo a ka e fang moamoheli
(ha e itokisetse kapa e sa lebelloa) * Ts'ebetso e latelang e hloka nako e itseng ea ho e etsa,
kahoo sebali se tla khutlisa molaetsa ona ha molaetsa o mong o amoheloa nakong ea ts'ebetso. - Ho bulela, ho tima, ho ikemela, ho kenya, ho kenya PIP, ho seta ka boits'oaro le ho seta fektheri bocha.
* Tlatsa pakete ea taelo ea "NULL Message" ka tsela e latelang. 01h-30h-30h-41h-42h-30h-34h-02h-42h-45h-03h-CHK-0Dh SOH-'0'-'0'-'A'-'B'-'0'-'4' -STX-'B'-'E'-ETX-CHK-CR

/

span class='title' style='pontšo: ha ho letho;'>

6. Mokhoa o tloaelehileng mohlalaample

E latelang ke joalo kaample ea mekhoa ea ho laola leihlo, tsena ke exampkarolo ea "Get parameter", "Set parameter" le "Boloka li-setting tsa hajoale".
6.1. Mokhoa oa ho fetola maemo a "Backlight".
6.1.1. Mohato oa 1. Mookameli o kopa Monitor hore a arabe ka boemo ba morao-rao ba morao-rao le bokhoni ba ho tšehetsa ts'ebetso ena. (Fumana paramente)

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-'0'-Monitor ID

STX-'0'-'0'-'1'-'0'-ETX

BCC

CR

-'0'-'C'-'0'-'6'

|

Hlooho

SOH (01h) : Qala ea Sehlooho. '0' (30h) : E bolokiloe. Monitor ID: Hlalosa ID ea Monitor eo u batlang ho fumana boleng ho eona.
Ex.) Haeba Monitor ID ke ‘1’, bolela ‘A’. '0' (30h) : Motho ea romellang molaetsa ke molaoli. 'C' (43h) : Mofuta oa molaetsa ke "Fumana taelo ea paramethara". '0'-'6' (30h, 36h) : Bolelele ba molaetsa ke li-byte tse 6.

Molaetsa

'0'-'0'(30h, 30h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 0.

'1'-'0'(31h, 30h) : Khoutu ea ts'ebetso ke 10h (leqepheng la khoutu ea OP 0).

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.1.2. Mohato oa 2. Mohlahlobi o arabela ka mokhoa oa hona joale oa Backlight le bokhoni ba ho tšehetsa ts'ebetso ena.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-‘0’-‘0’-Monitor ID STX-‘0’-‘0’-‘0’-‘0’-‘1’-‘0’-‘0-”0’

BCC

CR

-'D'-'1'-'2'

-‘0’-‘0’-‘6’-‘4’-‘0’-‘0’-‘3’-‘2’-ETX

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : E bolokiloe ‘0’ (30h) : Moamoheli oa molaetsa ke molaoli. ID ea Mohlokomeli: Hlalosa ID ea Mohlokomeli ea arabang.
Ex.) Ha byte ena e behiloe ho 'A', ID ea Monitor e arabelang ke '1'. 'D' (44h) : Mofuta oa Molaetsa ke "Fumana karabo ea parameter". ‘1’-‘2’ (31h, 32h) : Bolelele ba molaetsa ke 18 bytes.

Molaetsa

'0'-'0'(30h, 30h) : Khouto ya sephetho. Ha ho phoso.

'0'-'0'(30h, 30h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 0.

‘1’-‘0’(31h, 30h) : Khoutu ya tshebetso ke 10h (leqepheng la 0).

'0'-'0'(30h, 30h) : Ts'ebetso ena ke mofuta oa "Set parameter".

‘0’-‘0’-‘6’-‘4′(30h, 30h, 36h, 34h)

: Boleng ba khanya e ka morao ke 100(0064h).

‘0’-‘0’-‘3’-‘2′(30h, 30h, 33h, 32h)

: Boemo ba hona joale ba Backlight ke 50 (0032h) .

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.1.3. Mohato oa 3. Molaoli o kopa sebali ho fetola maemo a Backlight

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-'0'-Monitor ID

STX-'0'-'0'-'1'-'0'

BCC

CR

-'0'-'E'-'0'-'A'

-'0'-'0'-'5'-'0'-ETX

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : ID e bolokiloeng ea Monitor: Hlalosa ID ea Molai eo u batlang ho fetola litlhophiso tsa eona.
Ex.) Haeba Monitor ID ke ‘1’, bolela ‘A’. '0' (30h) : Motho ea romellang molaetsa ke molaoli. 'E' (45h) : Mofuta oa Molaetsa ke "Seta taelo ea parametha". '0'-'A' (30h, 41h) : Bolelele ba molaetsa ke li-byte tse 10.

Molaetsa

'0'-'0'(30h, 30h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 0.

‘1’-‘0’(31h, 30h) : Khoutu ya tshebetso ke 10h (leqepheng la 0).

‘0’-‘0’-‘5’-‘0′(30h, 30h, 35h, 30h)

: Beha Backlight setting 80 (0050h).

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.1.4. Mohato 4. Mohlahlobi o araba ka molaetsa oa netefatso.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-‘0’-‘0’-Monitor ID STX-‘0’-‘0’-‘0’-‘0’-‘1’-‘0’–‘0’-‘0’

BCC

CR

-'F'-'1'-'2'

-‘0’-‘0’-‘6’-‘4’-‘0’-‘0’-‘5’-‘0’-ETX

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : E bolokiloe ‘0’ (30h) : Moamoheli oa molaetsa ke molaoli. ID ea Mohlokomeli: Hlalosa ID ea Mohlokomeli ea arabang.
Ex.) Ha byte ena e behiloe ho 'A', ID ea Monitor e arabelang ke '1'. 'F' (46h) : Mofuta oa Molaetsa ke "Seta karabo ea parametha". ‘1’-‘2’ (31h, 32h) : Bolelele ba molaetsa ke 18 bytes.

Molaetsa

'0'-'0'(30h, 30h) : Khouto ya sephetho. Ha ho phoso.

'0'-'0'(30h, 30h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 0.

‘1’-‘0’(31h, 30h) : Khoutu ya tshebetso ke 10h (leqepheng la 0).

'0'-'0'(30h, 30h) : Ts'ebetso ena ke mofuta oa "Set parameter".

‘0’-‘0’-‘6’-‘4′(30h, 30h, 36h, 34h)

: Boleng ba khanya e ka morao ke 100(0064h).

‘0’-‘0’-‘5’-‘0′(30h, 30h, 35h, 30h)

: Boemo ba hona joale ba Backlight ke 80 (0050h) .

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

Pheta Mohato oa 1 le Mohato oa 2, haeba u hloka ho hlahloba boemo ba Backlight. (E khothalelitsoe)

/

span class='title' style='pontšo: ha ho letho;'>

6.1.5. Mohato oa 5. Kopa sebali ho boloka maemo a Backlight. (Boloka Taelo ea Hona Joale ea Litlhophiso)

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-'0'-Monitor ID

STX-'0'-'C'-ETX

BCC

CR

-'0'-'A'-'0'-'4'

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : ID e Rehelletsoeng ea Monitor: Hlalosa ID ea Monitor eo u batlang ho e boloka.
Ex.) Haeba Monitor ID ke ‘1’, bolela ‘A’. '0' (30h) : Motho ea romellang molaetsa ke molaoli. 'A' (41h) : Mofuta oa molaetsa ke "Command". ‘0’-‘4’ (30h, 34h) : Bolelele ba molaetsa ke li-byte tse 4.

Molaetsa

‘0’-‘C’(30h, 43h) : Khouto ya taelo ke 0Ch jwalo ka “Boloka di-setting tsa hajwale”.

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter CR (0Dh) : Qetello ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.2. Mokhoa oa ho bala boleng ba tekanyo ea li-sensor tsa mocheso tse hahiloeng.
Haeba ponts'o e na le sensor ea mocheso e hahiloeng, molaoli o sebelisa li-sensor tsena ka taolo ea kantle. U ka shebella mocheso o ka hare. Mokhoa oa ho bala mocheso o bontšoa ka tlase e le example mokhoa oa ho e sebelisa.
6.2.1. Mohato oa 1. Khetha sensor ea mocheso eo u batlang ho e bala.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-'0'-Monitor ID

STX-'0'-'2'-'7'-'8'

BCC

CR

-'0'-'E'-'0'-'A'

-'0'-'0'-'0'-'1'-ETX

Hlooho

SOH (01h) : Start of Header ‘0’ (30h) : Re Reserved Monitor ID: Hlalosa ID ya Monitor eo o batlang ho fumana boleng.
Ex.) Haeba Monitor ID ke ‘1’, bolela ‘A’. '0' (30h) : Motho ea romellang molaetsa ke molaoli. 'E' (45h) : Mofuta oa Molaetsa ke "Seta taelo ea parametha". '0'-'A' (30h, 41h) : Bolelele ba molaetsa ke li-byte tse 10

Molaetsa

'0'-'2'(30h, 32h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 2.

‘7’-‘8’(37h, 38h) : Khoutu ya tshebetso ke 78h (leqepheng la 2).

‘0’-‘0’-‘0’-‘1′(30h, 30h, 30h, 31h)

: Khetha sensor ea mocheso #1 (01h).

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.2.2. Mohato oa 2. Mohlahlobi o araba bakeng sa netefatso.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-‘0’-‘0’-Monitor ID STX-‘0’-‘0’-‘0’-‘2’-‘7’-‘8’-‘0’-‘0’

BCC

CR

-'F'-'1'-'2'

-‘0’-‘0’-‘0’-‘3’-‘0’-‘0’-‘0’-‘1’-ETX

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : E bolokiloe ‘0’ (30h) : Moamoheli oa molaetsa ke molaoli. Monitor ID: E bonts'a ID ea Monitor e arabang.
Ex.) Ha byte ena e behiloe ho 'A', ID ea Monitor e arabelang ke '1'. 'F' (46h) : Mofuta oa Molaetsa ke "Seta karabo ea parametha". ‘1’-‘2’ (31h, 32h) : Bolelele ba molaetsa ke 18 bytes.

Molaetsa

'0'-'0'(30h, 30h) : Khouto ya sephetho. Ha ho phoso.

'0'-'2'(30h, 32h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 2.

‘7’-‘8’(37h, 38h) : Khoutu ya tshebetso ke 78h (leqepheng la 2).

'0'-'0'(30h, 30h) : Ts'ebetso ena ke mofuta oa "Set parameter".

‘0’-‘0’-‘0’-‘3′(30h, 30h, 30h, 33h)

: Palo ea li-sensor tsa mocheso ke 3 (0003h).

‘0’-‘0’-‘0’-‘1′(30h, 30h, 30h, 31h)

: sensor ea mocheso ke #1.

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter

CR (0Dh): Qetellong ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.2.3. Mohato oa 3. Mookameli o kopa sebali ho romela mocheso ho tsoa ho sensor e khethiloeng.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-'0'-Monitor ID

STX-'0'-'2'-'7'-'9'-ETX

BCC

CR

-'0'-'C'-'0'-'6'

Hlooho

SOH (01h) : Start of Header ‘0’ (30h) : Re Reserved Monitor ID: Hlalosa ID ya Monitor eo o batlang ho fumana boleng.
Ex.) Haeba Monitor ID ke ‘1’, bolela ‘A’. '0' (30h) : Motho ea romellang molaetsa ke molaoli. 'C' (43h) : Mofuta oa Molaetsa ke "Fumana paramethara". '0'-'6' (30h, 36h) : Bolelele ba molaetsa ke li-byte tse 6.

Molaetsa

'0'-'2'(30h, 32h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 2.

'7'-'9'(37h, 39h) : Khoutu ea ts'ebetso ke 79h (leqepheng la khoutu ea OP 2).

ETX (03h)

: Qetello ea Molaetsa

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter CR (0Dh) : Qetello ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

6.2.4. Mohato oa 4. Mohlahlobi o araba mocheso oa sensor e khethiloeng.

Hlooho

Molaetsa

Sheba khoutu ea Delimiter

SOH-‘0’-‘0’-Monitor ID STX-‘0’-‘0’-‘0’-‘2’-‘7’-‘9’-‘0’-‘0’

BCC

CR

-'D'-'1'-'2'

-'F'-'F'-'F'-'F'-'0'-'0'-'3'-'2'-ETX

Hlooho

SOH (01h) : Ho qala ha Hlooho ea ‘0’ (30h) : E bolokiloe ‘0’ (30h) : Moamoheli oa molaetsa ke molaoli. ID ea Mohlokomeli: Hlalosa ID ea Mohlokomeli ea arabang.
Ex.) Ha byte ena e behiloe ho 'A', ID ea Monitor e arabelang ke '1'. 'D' (44h) : Mofuta oa Molaetsa ke "Fumana karabo ea parameter". ‘1’-‘2’ (31h, 32h) : Bolelele ba molaetsa ke 18 bytes.

Molaetsa

'0'-'0'(30h, 30h) : Khouto ya sephetho. Ha ho phoso.

'0'-'2'(30h, 32h) : Nomoro ea leqephe la khoutu ea ts'ebetso ke 2.

‘7’-‘9’(37h, 39h) : Khoutu ya tshebetso ke 79h (leqepheng la 2).

'0'-'0'(30h, 30h) : Ts'ebetso ena ke mofuta oa "Set parameter".

‘F’-‘F’-‘F’-‘F’(46h, 46h, 46h, 46h)

: Boleng bo phahameng.

‘0’-‘0’-‘3’-‘2′(30h, 30h, 33h, 32h)

: Thempereichara ke likhato tse 25 tsa Celsius.

ETX (03h)

: Qetello ea Molaetsa

Boleng ba ho bala ke tlatsetso ea 2.

Mocheso [Celsius]

Boleng ba ho bala

Binary

Hexadecimal

+125.0

| 0000 0000 1111 1010 00FAh

+ 25.0

| 0000 0000 0011 0010 0032h

+ 0.5

| 0000 0000 0000 0001 0001h

0

| 0000 0000 0000 0000 0000h

- 0.5

| 1111 1111 1111 1111 FFFFh

- 25.0

| 1111 1111 1100 1110 FFCEh

- 55.0

| 1111 1111 1001 0010 FF92h

Hlahloba khoutu

BCC

: Block Check Code

Sheba karolo ea 4.3 "Check code" bakeng sa lipalo tsa BCC.

Delimiter CR (0Dh) : Qetello ea pakete

/

span class='title' style='pontšo: ha ho letho;'>

7. Litaelo tsa CTL

Taelo ea Tsamaiso

CTL-0C. Boloka Litlhophiso tsa Hona Joale

Mosebetsi

Taelo ena e sebelisetsoa ho boloka boleng bo fetotsoeng.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'4'-STX “Data ” ETX BCC 0DH [HEX]01H 30H ID 30H 41H 30H 34H 02H (D01~02) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~02

Molaetsa

“0C”(30H 43H) : Boloka Litlhophiso tsa Hona Joale

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'6′-STX “Data ” 03H BCC 0DH [HEX]01H 30H 30H ID 42H 30H 36H 02H (D01~04) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“000C”(30H 30H 30H 43H) : Boloka Litlhophiso tsa Hona Joale

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

CTL-07. Fumana Tlaleho ea Nako le Karabo ea Nako

Mosebetsi

Taelo ena e sebelisoa ho tlaleha nako ea setšoantšo se bontšitsoeng.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'4'-STX “Data ” ETX BCC 0DH [HEX]01H 30H ID 30H 41H 30H 34H 02H (D01~02) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~02

Molaetsa

“07”(30H 37H) : Fumana taelo ea Tlaleho ea Nako.

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'E'-STX “Data

” 03H BCC 0DH

[HEX]01H 30H 30H ID 42H 30H 45H 02H (D01~02 D03~04 D05~08 D09~12) 03H BCC 0DH

Lintlha

Litaba

————————————————————————

D01~02

Molaetsa

“4E”(34H 45H) : Taelo

D03~04

SS

Bit 7 = 1: Sync Frequency e tsoile sebakeng. (kapa Ha ho lets'oao.)

Bit 6 = 1: Palo e sa tsitsang

Bit 5-2 e bolokiloe (Ha u tsotelle)

hanyane 1

1:Positive Horizontal sync polarity.

0: Negative Horizontal sync polarity.

hanyane 0

1:Positive Vertical sync polarity.

0:Polarity e nyahamisang ea Negative Vertical.

D05~08

H Khafetsa: Maqhubu a Horizontal ho yuniti 0.01kHz

D09~12

V Freq: Maqhubu a Emeng ka yuniti 0.01Hz

Ex.) Ha H Freq e le ‘1”2”A”9′ (31h, 32h, 41h, 39h), e bolela 47.77kHz.

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

Mokhoa oa ho laola matla

CTL-01D6. Boemo ba matla ba ho bala

Mosebetsi

Taelo ena e sebelisetsoa ho bala boemo ba hona joale ba matla.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'6'-STX “Data ” ETX BCC 0DH [HEX]01H 30H ID 30H 41H 30H 36H 02H (D01~04) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

"01D6"(30H,31H,44H,36H) : Fumana taelo ea boemo ba matla

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'1'-'2′-STX “Boitsebiso

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 31H 32H 02H (D01~02 D03~04 D05~06 D07~08 D09~12 D13~16) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~02

Lintlha tse bolokiloeng

“02”(30H,32H)

D03~04

Khoutu ea sephetho

“00”(30H,30H) : Ha ho Phoso

“01”(30H,31H) : Ha e tšehetsoe

D05~06

Hlahisa khoutu ea mokhoa oa matla

“D6″(44H,36H) :

D07~08

Mofuta oa parameter

“00”(30H,30H): Beha paramethara

D09~12

Max

"0004"(30H,30H,30H,34H) : Mokhoa oa matla ke mefuta e 4.

D13~16

Mokhoa oa hona joale oa matla

“0001”(30H,30H,30H,31H) : ON

“0002”(30H,30H,30H,32H) : Ema-haufi (ho boloka matla)

“0003”(30H,30H,30H,33H) : Reserved

“0004”(30H,30H,30H,34H) : TIMA (ho tshwana le ha IR e tima)

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

CTL-C203-D6. Taolo ea matla

Mosebetsi

Taelo ena e sebelisetsoa ho laola matla a ho shebella.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'C'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 30H 43H 02H (D01~06) (D07~10) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~06

Molaetsa

"C203D6" (43H 32H 30H 33H 44H 36H): taelo ea taolo ea matla

D07~10

Mokhoa oa matla

“0001”(30H 30H 30H 31H) : TSOELA

“0002”(30H 30H 30H 32H) : Se ke oa beha

“0003”(30H 30H 30H 33H) : Se ke oa beha

“0004”(30H 30H 30H 34H) : TIMA (ho tshwana le ha IR e tima)

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'E'-STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 30H 45H 02H (D01~02) (D03~08) (D09~12) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~02

Khoutu ea sephetho

“00”(30H 30H) : Ha ho Phoso

D03~08

Molaetsa

"C203D6" (43H 32H 30H 33H 44H 36H) : taelo ea karabo ea matla

D09~12

Mokhoa oa matla

“0001”(30H 30H 30H 31H) : TSOELA

“0002”(30H 30H 30H 32H) : Se ke oa beha

“0003”(30H 30H 30H 33H) : Se ke oa beha

“0004”(30H 30H 30H 34H) : TIMA (ho tshwana le ha IR e tima)

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

Serial No. & Model Name Bala

CTL-C216. Lethathamo la No. Bala

Mosebetsi

Taelo ena e sebelisoa ho bala nomoro ea serial.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'6'-STX “Data ” ETX BCC 0DH [HEX]01H 30H ID 30H 41H 30H 36H 02H (D01~04) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“C216″(43H 32H 31H 36H) : Taelo ea No.

ACK

[DAT]SOH-'0'-'0'-ID-'B'- N – N -STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H LEN LEN 02H (D01~04) (D05~XX) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“C316″(43H 33H 31H 36H) : Reply No.

D05~XX

Nomoro ea Leseli(XX Max=30)

* The byte data 20h e kentsoe e le litlhaku tsa ASCII '2' le '0' (32h le 30h).

Ex.) Bakeng sa mohlalaample ha o fumana data ea Nomoro ea serial

33h 31h 33h 32h 33h 33h 33h 34h

Mohato oa 1: Lintlha tsa Nomoro ea Serial li kentsoe joalo ka khoele ea litlhaku.

ExampLe:

33h 31h 33h 32h 33h 33h 33h 34h

-> ‘3’,’1′,’3′,’2′,’3′,’3′,’3′,’4′

Mohato oa 2: Hlalosa lipara tsa litlhaku tsa ASCII ho boleng ba hexadecimal.

ExampLe:

‘3’,’1′,’3′,’2′,’3′,’3′,’3′,’4′

-> 31h , 32h , 33h , 34h

Mohato oa 3: Lintlha tsa Byte li emela data ea khoele ea ASCII.

ExampLe:

31h 32h 33h 34h

-> "1234"

Sephetho: Nomoro ea serial ke "1234".

Tlhokomeliso: Ha ho romeloe litlhaku tse felisitsoeng.

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

CTL-C217. Lebitso la Mohlala Bala

Mosebetsi

Taelo ena e sebelisoa ho bala Lebitso la Mohlala.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'6'-STX “Data ” ETX BCC 0DH [HEX]01H 30H ID 30H 41H 30H 36H 02H (D01~04) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

"C217" (43H 32H 31H 37H): Taelo ea Lebitso la Mohlala

ACK

[DAT]SOH-'0'-'0'-ID-'B'- N – N -STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H LEN LEN 02H (D01~04) (D05~XX) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

"C317″(43H 33H 31H 37H) : Taelo ea karabo ea lebitso la mohlala

D05~XX

Lebitso la mohlala(XX Max=36)

* The byte data 20h e kentsoe e le

ASCII litlhaku '2' le '0' (32h le 30h).

Ex.) Bakeng sa mohlalaample ha o fumana data ea Model Name

35h 30h 33h 34h 33h 30h 33h 33h

Mohato oa 1: Lintlha tsa Lebitso la Mohlala ke khoele ea litlhaku tse kentsoeng.

ExampLe:

35h 30h 33h 34h 33h 30h 33h 33h

-> ‘5’,’0′,’3′,’4′,’3′,’0′,’3′,’3′

Mohato oa 2: Hlalosa lipara tsa litlhaku tsa ASCII ho boleng ba hexadecimal.

ExampLe:

‘5’,’0′,’3′,’4′,’3′,’0′,’3′,’3′

-> 50h , 34h , 30h , 33h

Mohato oa 3: Lintlha tsa Byte li emela data ea khoele ea ASCII.

ExampLe:

50h 34h 30h 33h

-> "P403"

Sephetho: Lebitso la Mohlala ke "P403".

Tlhokomeliso: Ha ho romeloe litlhaku tse felisitsoeng.

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

Aterese ea MAC Bala Kopo & Araba

CTL-C220. Kopa Aterese ea MAC

Mosebetsi

Taelo ena e sebelisoa ho bala Aterese ea MAC.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'8'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 31H 30H 02H (D01~04) (D05~06) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“C220″(43H 32H 32H 40H) : Aterese ea MAC Bala Kopo

D05~06

Khetha sesebelisoa

“00”(30H 30H) :e tsitsitseng

ACK

[DAT]SOH-'0'-'0'-ID-'B'- N – N -STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H LEN LEN 02H (D01~04) (D05~06) (D07~XX) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“C320″(43H 33H 32H 30H) : Aterese ea MAC Bala Kopa taelo ea karabo

D05~06

Khetha sesebelisoa

“00”(30H 30H) :e tsitsitseng

D07~XX

Aterese ea MAC(XX Max=12)

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

Remote Control Data Code ho romela sebopeho ka RS-232C

CTL-C210. Remote Control Data Code ho romela sebopeho ka RS-232C

Mosebetsi

Taelo ena e sebelisetsoa ho romella Remote Control Data Code.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'C'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 30H 43H 02H (D01~04) (D05~06) (D07~08) (D09~10) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

"C210" (43H 32H 31H 30H): Taelo ea Khoutu ea Taolo ea Remoutu

D05~06

remote control data code upper byte(Holimo)

“00”(30H 30H)

D07~08

Remoutu data code upper byte(Low)

“1D”(31H 44H) : SETŠOANTŠO

“29”(32H 39H) : ASPECT

“43”(34H 33H) : MOLEMO

“08”(30H 38H) : 1

“09”(30H 39H) : 2

“0A”(30H 41H) : 3

“0B”(30H 42H) : 4

“0C”(30H 43H) : 5

“0D”(30H 44H) : 6

“0E”(30H 45H) : 7

“0F”(30H 46H) : 8

“10”(31H 30H) : 9

“44”(34H 34H) : LEKHATSI

“12”(31H 32H) : 0

“19”(31H 39H) : TSEBISO

“20”(32H 30H) : MENU

“1F”(31H 46H) : TSOA

“15”(31H 35H) : PHAHAMA

“14”(31H 34H) : FATSHE

“21”(32H 31H) : LETSATSI

“22”(32H 32H) : KA NNETE

“23”(32H 33H) : Ho lokile

“17”(31H 37H) : BUKA +

“16”(31H 36H) : BOLULA-

“33”(33H 33H) : CH +

“32”(33H 32H) : CH –

“1B”(31H 42H) : LImumu

“27”(32H 37H) : HIMA

“2C”(32H 43H) : CC

“1A”(31H 41H) : MTS

“57”(35H 37H) : Ho potoloha ha Setšoantšo

D09~10

pheta linako (HL)

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'A'-STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 30H 38H 02H (D01~04) (D05~06) (D07~08) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

"C310" (43H 33H 31H 30H) : Taelo ea karabo ea R/emote Control Data Code

span class='title' style='pontšo: ha ho letho;'>
D05~06 D07~08
Hlokomela

Remoutu data code upper byte(High) “00”(30H 30H)
remote control data code upper byte(Low) E tlositsoe hobane e ts'oana le data e fetisoang.

/

span class='title' style='pontšo: ha ho letho;'>

Firmware Version Taelo

CTL-CA02. Firmware Version Bala Kopo

Mosebetsi

Taelo ena e sebelisoa ho bala Firmware Version.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'8'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 30H 38H 02H (D01~04) (D05~06) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CA02″(43H 41H 30H 32H) : Firmware Version Bala Taelo

D05~06

Mofuta oa Firmware

“00”(30H 30H) : Phetoho ea F/W

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'1'-'2′-STX “Boitsebiso

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 31H 32H 02H (D01~04) (D05~06) (D07~08) (D09~16) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CB02″(43H 42H 30H 31H) : Firmware Version Bala taelo ea karabo

D05~06

Khoutu ea sephetho

“00”(30H 30H) : Ha ho Phoso

“01”(30H 31H) : Phoso

D07~08

Mofuta oa Firmware

"00"(30H 30H) : Phetoho ea Firmware

D09~16

Firmware Version Mohala

D09

:R

D10

: Major Version

“0”(30H) “9”(39H)

D11

: Nako

2EH (e tsitsitseng)

D12

: Nyenyane (Basic) Version1

“0”(30H) “9”(39H)

D13

: Nyenyane (Basic) Version2

“0”(30H) “9”(39H)

D14

: Nyenyane (Basic) Version3

“0”(30H) “9”(39H)

D15

: Version1 ea Lekala

“A”(41H) “Z”(5AH)

D16

: Version2 ea Lekala

“A”(41H) “Z”(5AH)

Hlokomela

Karolo ea tlhaiso-leseling ea mofuta ke khoele ea litlhaku tsa ASCII.

/

span class='title' style='pontšo: ha ho letho;'>

CTL-CA04-03. Kena Lebitso la Kopo e Behiloeng ea ho Bala Terminal

Mosebetsi

Taelo ena e sebelisoa ho bala Lebitso la Input la Terminal e Behiloeng.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'A'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 30H 41H 02H (D01~04) (D05~06) (D07~08) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CA04″(43H 41H 30H 34H) : Kena Lebitso la taelo

D05~06

Index

“03”(30H 33H) : Buka ea Terminal e Behiloeng

D07~08

Keletso Terminal

“00”(30H 30H) : Ha ho na moelelo

“01”(30H 31H) : VGA(RGB)

“05”(30H 35H) : AV

“0C”(30H 43H) : VGA(YPbPr)

“11”(31H 31H) : HDMI1

“12”(31H 32H) : HDMI2

“82”(38H 32H) : HDMI3

"87"(38H 37H) : MP(Sebapali sa Media)

ACK

[DAT]SOH-'0'-'0'-ID-'B'- N – N -STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H LEN LEN 02H (D01~04) (D05~06) (D07~08) (D09~10) (D11~XX) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CB04″(43H 42H 30H 34H) : Kena Lebitso la ho araba taelo

D05~06

Index

“03”(30H 33H) : Buka ea Terminal e Behiloeng

D07~08

Khoutu ea sephetho

“00”(30H 30H) : Ha ho Phoso

“01”(30H 31H) : Phoso

D09~10

Keletso Terminal

E siiloe hobane e tšoana le data e fetisoang.

D11~XX

Kena Lebitso

XX = Ka holimo ho 39

Bolelele ba litlhaku tse 14 tsa Lebitso la sebele

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

CTL-CA04-04. Lebitso le kenyelelitsoeng la Kopo e Ngotsoeng ea Terminal Ngola

Mosebetsi

Taelo ena e sebelisoa ho ngola Lebitso la Input la Terminal e Khethiloeng.

Taelo

[ASC]SOH-‘0’-ID-‘0’-‘A’- N – N -STX “Boitsebiso

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H LEN LEN 02H (D01~04) (D05~06) (D07~08) (D09~XX) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CA04″(43H 41H 30H 34H) : Kena Lebitso la taelo

D05~06

Index

“04”(30H 34H) : Ho Ngola Terminal e Behiloeng

D07~08

Keletso Terminal

“00”(30H 30H) : Ha ho na moelelo

“01”(30H 31H) : VGA(RGB)

“05”(30H 35H) : AV

“0C”(30H 43H) : VGA(YPbPr)

“11”(31H 31H) : HDMI1

“12”(31H 32H) : HDMI2

“82”(38H 32H) : HDMI3

"87"(38H 37H) : MP(Sebapali sa Media)

D09~XX

Kena Lebitso

XX = Ka holimo ho 37

Bolelele ba litlhaku tse 14 tsa Lebitso la sebele

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'A'-STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 30H 41H 02H (D01~04) (D05~06) (D07~08) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CB04″(43H 42H 30H 34H) : Kena Lebitso la ho araba taelo

D05~06

Index

“04”(30H 34H) : Ho Ngola Terminal e Behiloeng

D07~08

Khoutu ea sephetho

“00”(30H 30H) : Ha ho Phoso

“01”(30H 31H) : Phoso

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

CTL-CA04-05. Lebitso le kenyelelitsoeng la Kopo e Behiloeng ea ho Seta Botjha ha Terminal

Mosebetsi

Taelo ena e sebelisoa bakeng sa ho seta botjha Lebitso la Kenyeletso la Terminal e Khethiloeng.

Taelo

[ASC]SOH-'0'-ID-'0'-'A'-'0'-'A'-STX "Data

” ETX BCC 0DH

[HEX]01H 30H ID 30H 41H 30H 41H 02H (D01~04) (D05~06) (D07~08) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CA04″(43H 41H 30H 34H) : Kena Lebitso la taelo

D05~06

Index

“05”(30H 35H) : Ho Hlophisa Seteishene se Khethiloeng

D07~08

Keletso Terminal

“00”(30H 30H) : TSOHLE Terminal

“00”(30H 30H) : Ha ho na moelelo

“01”(30H 31H) : VGA(RGB)

“05”(30H 35H) : AV

“0C”(30H 43H) : VGA(YPbPr)

“11”(31H 31H) : HDMI1

“12”(31H 32H) : HDMI2

“82”(38H 32H) : HDMI3

"87"(38H 37H) : MP(Sebapali sa Media)

ACK

[DAT]SOH-'0'-'0'-ID-'B'-'0'-'A'-STX “Data

” ETX BCC 0DH

[HEX]01H 30H 30H ID 42H 30H 41H 02H (D01~04) (D05~06) (D07~08) 03H BCC 0DH

Lintlha

Litaba

—————————————————————————

D01~04

Molaetsa

“CB04″(43H 42H 30H 34H) : Kena Lebitso karabo

D05~06

Index

“05”(30H 35H) : Ho Hlophisa Seteishene se Khethiloeng

D07~08

Khoutu ea sephetho

“00”(30H 30H) : Ha ho Phoso

“01”(30H 31H) : Phoso

Hlokomela

/

span class='title' style='pontšo: ha ho letho;'>

8. Menu ya OSD le tafole ya ho bapisa bakeng sa taelo ka nngwe

Tafole ea litlhophiso tse teng ho menu ea OSD ea sebali khahlano le taelo ka 'ngoe. Litaelo tse ling tse sieo ho menu ea OSD li thathamisitsoe karolong ea "Tse ling" ea tafole ea papiso.
Sebopeho sa taelo ea VCP
VCP - "OP code page" - "OP code"
Ex.) Leqephe la khoutu ea VCP-00-60 OP: 00 OP khoutu: 60

Video ea OSD

Mokhoa oa Litšoantšo

Video e tsoetseng pele

Aspect ratio

Overscan Dimming Setting

Taelo ea VCP-02-1A VCP-02-70
VCP-02-E3 VCP-11-4E

Mocheso oa Mobala

VCP-00-0C VCP-00-14

Mocheso oa Mobala

R VCP-00-16

Tloaelo G VCP-00-18

Phokotso ea Lerata

B VCP-00-1A
VCP-02-20 VCP-02-26
/

Paramethara
0001H : NORMAL 0002H : FULL 0004H : ZOOM 0007H : 1:1
0001H : E tima 0002H : Ka 0003H : Ka ho iketsa
0001H : OFF 0002H : Dynamic Backlight 0003H : Dimming ea Sebaka
VCP-00-0C 0023H : Mofuthu 003FH : Tloaelehileng 005AH : Pholile
VCP-00-14 0002H : Native 000BH : Tloaelo
0000H – 00FFH ( Lefifi) – ( ​​E kganyang )
0000H – 00FFH ( Lefifi) – ( ​​E kganyang )
0000H – 00FFH ( Lefifi) – ( ​​E kganyang )
VCP-02-20 0000H : OFF 0001H : Tlase

span class='title' style='pontšo: ha ho letho;'>

Phapang e Fetohang
Gamma Ambient Light Sensing Color Ntlafatsa Mokhoa oa HDR Backlight / Khanya e Bapang le Video Boemo bo Botsho
bohale
Mmala
/

VCP-02-8D
VCP-02-68
VCP-10-C8 VCP-11-EC VCP-11-E5 VCP-00-10 VCP-00-12 VCP-00-92
VCP-00-87 VCP-00-8C
VCP-00-8A VCP-02-1F

0002H : Bohareng ba 0003H : Holimo
VCP-02-26 0000H : OFF 0001H : Tlase 0002H : Har'a 0003H : Holimo
0001H : E Tloha 0002H : Tlase 0003H : Bohareng ba 0004H : Holimo
0001H : Letsoalloa 0004H : 2.2 0008H : 2.4 0010H : HDR-Hybrid Log 0011H : HDR-ST2084(PQ)
0001H : E tima 0002H : Bulela
0001H : Off 0002H : Vivid 0003H : E pharaletseng
0004H : Tlase 0005H : Bohareng ba 0006H : Holimo
0000H – 0064H ( Lefifi) – ( ​​E khanyang)
0000H – 0064H ( Tlase ) – ( ​​Hodimo )
0000H – 0064H (Ho Lefifi) – ( ​​Ho Khanya)
VCP-00-87 0000H – 0064H ( Dull ) – ( ​​Sharp)
VCP-00-8C 0000H – 0064H ( Dull ) – ( ​​Sharp)
VCP-00-8A 0000H – 0064H ( Pale ) – ( ​​Ho ea botebong)

span class='title' style='pontšo: ha ho letho;'>

Tint

Seta hape Litlhophiso tsa Video

Audio

Mokgwa wa Modumo

Mokgwa wa Modumo

120Hz 500Hz 1.5kHz 5kHz 10kHz

Ho leka-lekanya

Potoloha

Libui tsa ka hare Digital Output

Kenyeletso ya Modumo

Audio Ho lieha Seta bocha Litlhophiso tsa Audio

VCP-00-90
VCP-02-CB
VCP-10-B2 N/AN/AN/AN/AN/A VCP-00-93 VCP-02-34
VCP-11-BA N/A
VCP-02-2E
VCP-10-CB VCP-02-31 VCP-02-CB

VCP-02-1F 0000H – 0064H ( Pale ) – ( ​​Ho ea Botebong)
0000H - 0064H ( Ho Purplish ) - ( Ho ea ho Greenish )
0001H : Tsohle(=Reset ea Fektheri) 0002H : Setšoantšo 0003H : Fetola 0004H : Audio 0010H : Netweke
0001H : Tloaelehileng 0002H : Movie 0003H : Mmino 0005H : Tloaelo
-
-
-
-
-
0000H – 0064H ( Ho ya Ho le Letshehadi) – ( ​​Ho ya Ho Le letona)
0001H : E tima 0002H : Bulela
0000H : Ha ho bolele 0001H : Off 0002H : Ho 0003H : Ka ho iketsa
-
0001H : Audio1 (Audio In) 0002H : Audio2 (AV) 0004H : HDMI1 000AH : HDMI2 000BH : HDMI3 000DH : MP
0000H – 0064H ( Nyenyane ) – ( ​​E Khōlō)
VCP-02-31 0001H : Khutlisa hape

/

VCP-02-CB

span class='title' style='pontšo: ha ho letho;'>

Puo ea ho seta
Litlhophiso tsa OSD Transparency Information OSD

Pontšo ea mantsoe
Mantsoe a Koetsoeng(*1)
Litlhaloso tsa Analog

Litlhophiso tsa ho boloka matla

Mokhoa oa ho boloka matla a ho boloka matla a ho qala ka potlako

0001H : Tsohle(=Reset ea Fektheri) 0002H : Setšoantšo 0003H : Fetola 0004H : Audio 0010H : Netweke

VCP-00-68

0001H : Sesotho 0002H : Deutsch 0003H : Français 0004H : Español 0005H : 0006H : Italiano 0009H : 000EH : 000FH : Cestina

VCP-02-B8

0001H : Tloha 0002H : 30% 0003H : 50% 0004H : 70%

VCP-02-3D

0000H : E tima 0005H : Bulela

VCP-10-84

0000H : Ha ho bolele 0001H : Off 0002H : CC1 0003H : CC2 0004H : CC3 0005H : CC4 0006H : Mongolo1 0007H : Mongolo2 0008H : 3 Mongolo 0009: Mongolo 4

VCP-10-84

0000H : Ha ho bolele 0001H : Off 0002H : CC1 0003H : CC2 0004H : CC3 0005H : CC4 0006H : Mongolo1 0007H : Mongolo2 0008H : 3 Mongolo 0009: Mongolo 4

N/A

-

N/A

-

VCP-11-EA

0001H : E tima

/

span class='title' style='pontšo: ha ho letho;'>

Phetoho ea Kenyelletso ea Auto Power Down

Keletso 1

Phetoho ea ho Input

Keletso 2

N/A VCP-02-40 VCP-10-2E
VCP-10-2F

Keletso 3

VCP-10-30

CEC

Litlhophiso tsa HDMI

EDID

CEC
Koala Auto Receiver
Lethathamo la lisebelisoa

VCP-11-76 VCP-11-77 VCP-11-78 VCP-11-79

VCP-10-AA

Sebaka sa Video

Likhetho tsa VGA

HPD Lieha VGA Mokhoa

VCP-10-40
N/A VCP-10-8E
/

0002H : Bula
-
0000H : Pele 0002H : Ha ho na 0004H : Tloaelo
0001H : VGA 0005H : Video1(AV) 000CH : DVD/HD1(VGA(YPbPr)) 0011H : HDMI1 0012H : HDMI2 0082H : HDMI3
0001H : VGA 0005H : Video1(AV) 000CH : DVD/HD1(VGA(YPbPr)) 0011H : HDMI1 0012H : HDMI2 0082H : HDMI3
0001H : VGA 0005H : Video1(AV) 000CH : DVD/HD1(VGA(YPbPr)) 0011H : HDMI1 0012H : HDMI2 0082H : HDMI3
0001H : E tima 0002H : Bulela
0001H : Tlosa 0002H : Nolofatsa
0001H : Tlosa 0002H : Nolofatsa
0001H : NO 0002H : EE
0001H : Mokhoa 0 0002H : Mokhoa oa 1 0003H : Mokhoa oa 2
0001H : Letšoao le Atolositsoeng 0002H : Raw Signal 0003H : Auto
-
0001H : RGB 0002H : YPbPr

span class='title' style='pontšo: ha ho letho;'>

Litlhophiso tse ling

Auto Adjust H.Position V.Position Clock Phase H.Resolution V.Resolution
Seta hape likhetho tsa VGA

Kenya Li-Labels

Litlhophiso tsa Senotlolo

IR Lock Settings

Letšoao la LED la phepelo ea matla

Limumu Settings

Phetoho ea setšoantšo

Tsamaiso ea Mocheso

Molaetsa wa Temoso
Koala
/

VCP-00-1E VCP-00-20 VCP-00-30 VCP-00-0E VCP-00-3E VCP-02-50 VCP-02-51
VCP-02-CB
CTL-CA04-03 CTL-CA04-04 CTL-CA04-05 VCP-00-FB
VCP-02-3F
VCP-11-75 VCP-02-BE
VCP-11-E9
VCP-02-D7
VCP-11-ED
VCP-10-8A

0001H : Phethahatsa
0000H – 0064H ( Lehlakore le Letshehadi ) – ( ​​Lehlakore le letona )
0000H – 0064H (Lehlakore le Tlase) – ( ​​Lehlakore le ka Holimo)
0000H - 0064H
0000H - 0064H
0000H – FFFFH ( Tlase ) – ( ​​Hodimo )
0000H – FFFFH ( Tlase ) – ( ​​Hodimo )
0001H : Tsohle(=Reset ea Fektheri) 0002H : Setšoantšo 0003H : Fetola 0004H : Audio 0010H : Netweke
Sheba karolo ea 7
0000H : Off 0001H : Mode2 0002H : Mode1
0001H : Off 0004H : Mode2 0005H : Mode1
0001H : KA 0003H : TIMA
0001H : KA 0002H : TIMA
0001H : Audio 0002H : Video 0003H : Audio & Video
0001H : TLOA 0004H : HO BONAHALA
0000H : Ha ho bolele 0001H : Off 0002H : Bula
0001H : E tima 0002H : Bulela

span class='title' style='pontšo: ha ho letho;'>

Boitsebiso ba Pontšo

N/A

-

Lekola Boitsebiso

CTL-C217 CTL-CA02 CTL-C216 VCP-02-78 VCP-02-79

Sheba karolo ea 7

Hlahisa Fektheri bocha

VCP-02-CB

0001H : Tsohle(=Reset ea Fektheri) 0002H : Setšoantšo 0003H : Fetola 0004H : Audio 0010H : Netweke

Control Interface

VCP-10-3E

0001H : RS-232C 0002H : LAN

DHCP

N/A

-

Aterese ea IP:

N/A

-

SUBNET MASK:

N/A

-

Laola Litlhophiso

Litlhophiso tsa Marang-rang

DEFAULT GATEWAY: DNS PRIMARY: DNS SECONDARY: MAC ADDRESS:

N/A

-

N/A

-

N/A

-

N/A

-

POLOKO

N/A

-

ID ea leihlo

VCP-02-3E

0001H - 0064H

Seta hape Litlhophiso tsa Marang-rang

VCP-02-CB

0001H : Tsohle(=Reset ea Fektheri) 0002H : Setšoantšo 0003H : Fetola 0004H : Audio 0010H : Netweke

Sebapali sa Media

USB Demo Mode UnPlug Sesebediswa sa USB Temoso Fesetere

N/A

-

N/A

-

N/A

-

Nako ea ho Robala

N/A

-

Kemiso

Litlhophiso tsa Nako ea Hona joale

Litlhophiso tsa kemiso

Motlakase O Tlohile

N/A

-

N/A

-

N/A

-

Mohloli oa Kenyeletso

HDMI1 HDMI2

VCP-00-60

0000H: Ha ho letho

0001H : VGA(RGB)

/

0005H : Video1(AV)

span class='title' style='pontšo: ha ho letho;'>
HotKey

HDMI3 VGA(RGB) VGA(YPbPr) AV Media Player SOURCE MUTE Digit 0~9/DASH SOUND PITURE UP/TLASE/LE LETSATSI/LE HODIMO/OK VOL+/CH+/MENU EXIT EPG INFO FREEZE MTS CH.LIST FAV ASPECT CC PLAY Emisa EMA PHETHA E FETILENG FETA LETSATSI KA HO FIHLELA_PELE

000CH : DVD/HD1 (VGA(YPbPr)) 0011H : HDMI1 0012H : HDMI2 0082H : HDMI3 0087H : MP(Media Player)

CTL-C210

Sheba karolo ea 7

/

span class='title' style='pontšo: ha ho letho;'>
MATLA (*1) Ke mefuta ea US feela e sebelisoang
/

Litokomane / Lisebelisoa

SHARP E Series Pontšo ea Sebopeho se Seholo [pdf] Bukana ea Mosebelisi E758, E868, E letoto la EXNUMX, EXNUMX, E letoto la Pontšo e kholo ea Format, Pontšo e kholo ea Format, Pontšo ea Format, Pontšo.

Litšupiso

• Bukana ea Mosebelisi