Li-Sensors tsa Phallo ea Khase ea SENSIRON SFM3
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- Sebopeho sa Foromo: Likhoune tsa bongaka 22mm (ISO5356)
- Sensor: Mefuta e fapaneng e thathamisitsoeng ka tlase
- Ligase tse Lekanyelitsoeng: Air, O2, HeliOx
- Phallo Range: E fapana ho latela mohlala
- Ho theoha ha Khatello @ Phallo: E fapana ho latela mohlala
- Nepahalo e Tloaelehileng: E fapana ho latela mohlala
- Recommended Supply Voltage: E fapana ho latela mohlala (hangata 3.3V kapa 5V)
Litaelo tsa Tšebeliso ea Sehlahisoa
- Li-Sensors tsa Phallo tse susumetsang:
Haeba u tseba likhetho tse fetang bonngoe, lekola li-sensor tse sesebelisoa sa hau kaha moralo o ikhethileng oa sesebelisoa o ka ama tekanyo. - Proximal Flow Sensors:
Khatello ea gage e hlalosa phapang ea khatello pakeng tsa khatello ea khase ka har'a li-tubes / flow sensor le khatello e haufi. - Li-Sensors tsa Phallo tse felloang ke nako:
SFM3200-AW e etselitsoe boemo ba ho felloa ke nako ka likarolo tse kang ho theoha ha khatello e fokolang, ho hlatsuoa, heater, le bokhoni ba ho lekanya khase/moea o tletseng mouoane. - Hlokomela: Li-sensor tse susumetsang ha lia etsetsoa hore li hloekisoe kapa li hlatsoe ka likokoana-hloko 'me li hloka maemo a ts'ebetso a sa tsitsang.
LBH:
- P: Ke khetha sensor e nepahetseng ea phallo joang bakeng sa moea oa ka oa bongaka kapa sesebelisoa sa phallo e phahameng?
A: Sheba palo e fanoeng bukeng ea tataiso e arolang li-sensor ho latela boemo ba tsona tsamaisong ea moea. Nahana hape ka likarolo tse ikhethang le litšobotsi tsa li-sensor. - P: Na li-sensor tsa Inspiratory li ka tšeloa likokoana-hloko?
A: Che, li-sensor tse susumetsang ha lia etsetsoa hore li hloekisoe kapa li hlatsoe likokoana-hloko.
Tataiso ea khetho bakeng sa li-sensor tsa phallo ea khase ea Sensirion
Ho fumana sensor ea phallo e nepahetseng (SFM) bakeng sa moea oa hau oa bongaka kapa sesebelisoa sa phallo e phahameng.
Potefolio ea rona ea phallo ea sensor e fana ka mefuta e mengata e fapaneng ea li-sensors tsa phallo ea khase tse ntlafalitsoeng bakeng sa lits'ebetso tsa bongaka. Lethathamo la lihlahisoa tsa SFM le entsoe ka ho khetheha bakeng sa moea oa bongaka, le sebetsana le litlhoko tsohle tse nepahetseng tsa ho shebella phallo 'me li hlophisitsoe ka malapa a mararo, ho itšetlehile ka boemo ba sensor tsamaisong ea ventilation:
- E susumetsang
- E felloa ke nako
- Proximal
Palo e ka tlase e fana ka tataiso ea pele ea ho khetha sensor e loketseng ho latela boemo bo boletsoeng pejana ts'ebelisong. 
Ntle le moo, li-sensor tse ling li fana ka likarolo le litšobotsi tse ikhethang tse ka nahanoang nakong ea khetho ea sensor. Likarolo tsena li akaretsoa ho tse latelang ha tafole e leqepheng la 4-6 e fana ka tlhaloso e felletsengview.
Li-sensor tsa ho phalla tse susumetsang
Li-sensor tsa rona tse susumetsang li atisa ho sebelisoa ka har'a mochine oa moea ho lekanya moea ka mong / O2 / heliox melapo ea khase hammoho le phallo eohle ea khase e tsoakiloeng pele e beleha mokuli.
- Khetho e ipapisitseng le khatello ea gage ea ts'ebetso1
- 1bar → SFM4300 (kapa SFM4200 bakeng sa phallo> 50slm)
- 150mbar → SFM3013
- Khatello e tlase ea ts'ebetso: li-sensor tse ling kaofela (lelapa la SFM3003, SFM3100, SFM3119 le SFM3200).
- Nahana ka lintlha tse latelang ho latela litlhoko tsa hau ho tseba sensor e loketseng ka ho fetisisa tafoleng e leqepheng la 4:
- Sebopeho sa sebopeho le boholo
- Khokahano ea mochini
- Likhase tse lekantsoeng
- Phallo le mefuta e mengata ea ts'ebetso e ntle ka ho fetisisa (phallo e tlase kapa e phahameng)
- Tlhahiso ea analog kapa ea digital
- Likarolo tse ikhethang joalo ka sensor ea mocheso oa khase ea NTC joalo-joalo.
Haeba u tseba likhetho tse fetang bonngoe, ho khothaletsoa ho lekola li-sensor tse sesebelisoa sa hau kaha moralo o ikhethileng oa sesebelisoa o ka ama tekanyo.
Proximal flow sensors
Li-sensor tsa phallo ea khase ka ho khetheha li etselitsoe ho lekola phallo e haufi le mokuli, moo liphephetso tse latelang tse kholo li rarollotsoeng ke potefolio ea rona:
- Mongobo o phahameng le condensation
Li-sensor tsa rona tsohle tsa proximal li khona ho lekanya khase / moea o tletseng 'me li na le heater ho thibela condensation ho chip ea sensor, ka hona ho netefatsa ho tsoela pele ho nepahala. - Tšhilafatso
Re fana ka li-sensor tsa tšebeliso e le 'ngoe le tse hlatsuoang. - Ho sebetsana le li-sensor ke basebeletsi ba tsa bongaka
Li-sensor tsa rona tsohle tsa proximal li na le sebopeho sa mochini se lumellang khokahanyo ea clip-on, ho bonolo ho e khaola le ho hokela hape. - Tšusumetso le phallo ea ho felloa ke nako
Li-sensor tsa rona tsohle tsa proximal li lumella ho utloa ha phallo ea bi-directional. - Sephutheloana sa sensor ea motho ka mong bakeng sa li-sensor tsa tšebeliso e le 'ngoe
Li-sensor ka bomong li sirelelitsoe khahlanong le tšilafalo ho tloha tlhahiso ea tsona ho fihlela li sebelisoa ke bahlokomeli. Taolo ea boleng ea ntlafatsoa, taolo ea phepelo ea thepa e nolofatsoa, 'me leibole e ikhethileng e tlisa lintlha tsohle tse hlokahalang ho basebelisi.
Khetho ea sensor e nepahetseng e ipapisitse le litekanyetso tse peli tse kholo
- Sehlopha sa bakuli: masea a sa tsoa tsoaloa kapa batho ba baholo / lingaka
- Sebelisa maemong a kliniki: tšebeliso e le 'ngoe / e ka lahloang kapa e ka hlatsuoa
Khatello ea gage e hlalosa phapang ea khatello lipakeng tsa khatello ea khase ka har'a li-tubes / sensor ea phallo le khatello e teng
Li-sensor tsa ho felloa ke matla
SFM3200-AW e entsoe ka ho khetheha bakeng sa boemo ba ho felloa ke nako ka ho theoha ha khatello e fokolang, ho hlatsuoa, hitara le bokhoni ba ho lekanya khase/moea o tletseng mouoane.
Mekhoa e meng ea likhetho
- Li-sensor tsa proximal li ka sebelisoa ho feta ho mokuli ea boemong ba ho felloa ke matla, haeba ho ka khethoa khetho e ka lahloang.
- Li-sensor tse susumetsang li ka behoa sebakeng sa ho felloa ke matla haeba mehato e nkoa khahlanong le tšilafalo (joaloka li-filters tsa HMF) le condensation (lifi tsa metsi). Li-sensor tse susumetsang ha lia etsetsoa hore li hloekisoe kapa li hlatsoe ka likokoana-hloko 'me li hloka maemo a ts'ebetso a sa tsitsang.
| Sebopeho sa sebopeho | Sensoro | Likhase tse lekantsoeng | Sebaka sa phallo [slm] | Khatello e theoha @flow[slm] | Tlanya. ho nepahala [%mv] @flow[slm] | E khothalelitsoe phepelo voltage (lumemetsoe) | Likarolo tse khethehileng |
| Li-sensor tsa ho phalla tse susumetsang | |||||||
| Likhoune tsa bongaka 22mm (ISO5356) | SFM3003-CL
|
-30 ho ea ho +300 | @60: 80Pa @200: 500Pa | @200: ±2% | 3.3V (2.7 - 5.5V) | Ho theoha ha khatello e tlase | |
| Foromo ena hangata e fana ka ho nepahala ho betere ho | SFM3003-CE | -150 ho ea ho +300 | @60: 100Pa @200: 600Pa | @200: ±2.5% | 3.3V (2.7 - 5.5V) | Phallo e mpe e atolositsoeng | |
| phallo e phahameng | SFM3003-CET | -150 ho ea ho +300 | @60: 100Pa
@200: 600Pa |
@200: ±2.5% | 3.3V
(2.7 - 5.5V) |
|
|
|
|||||||
| SFM3013-CL | -30 ho ea ho +300 | @60: 80Pa @200: 500Pa | @200: ±2% | 3.3V (2.7 - 5.5V) |
|
||
| SFM3013-CLM |
|
@60: 80Pa @200: 500Pa | @200: ±2%
Heliox: ± 4.5% |
3.3V (2.7 - 5.5V) |
|
||
| EA-K3019 | -10 ho ea ho +240 | @60: 80Pa @200: 500Pa | @200: ±2% | 3.3V (2.7 - 5.5V) | Sheba mohlahlami SFM3003-300-CL | ||
 |
EA-K3020 |
|
-10 ho ea ho +160 | @60: 80Pa @200: 500Pa | @160: ±2% | 5V | Analoge tlhahiso 0.5 - 4.5V |
 |
EA-K3200 |
|
-100 ho ea ho +250 | @60: 100Pa @200: 750Pa | @100: ±3% | 5V | Sheba mohlahlami SFM3003-CL kapa CE |
| Sebopeho sa sebopeho | Sensoro | Likhase tse lekantsoeng | Sebaka sa phallo [slm] | Khatello e theoha @flow[slm] | Tlanya. ho nepahala [%mv] @flow[slm] | E khothalelitsoe phepelo voltage (lumemetsoe) |
Likarolo tse khethehileng |
| Compact | SFM3100-VC |
|
-24 ho ea ho +240 | @60: 300Pa | @60: 2.5% | 5V | NTC sensor ea mocheso tseleng ea khase |
| Foromo ena hangata e fana ka ho nepahala ho betere ho | @200: 1600Pa | (4.75 - 5.25V) |
|
||||
| phallo e tlase/e nyane | |||||||
| EA-K3119 | Moea | -10 ho ea ho +240 | @60: 200Pa | @100: 2% | 3.3V | Tlhahiso ea dijithale | |
| O2 | @200: 1600Pa | (2.7 - 5.5V) | |||||
| Motsoako oa moea/ O2 | |||||||
 |
EA-K4200 |
|
0 ho ea ho 160 | @60: 2000Pa @160: 9000Pa | @80: 2.5% | 5V |
|
| O-ring/ Push-in Legris/ Boetsuwa ba ho thella | |||||||
 |
EA-K4300 | Moea | 0 ho ea ho 20 | @20: 2500Pa | @20: 2% | 3.3V |
|
| O2 | 0 ho ea ho 50 | @50: 10000Pa | @50: 4% | (3.0 - 5.5V) | |||
| CO2 | |||||||
| N2O | |||||||
| Metsoako |
|
Sebopeho sa sebopeho |
Sensoro |
Likhase tse lekantsoeng |
Sebaka sa phallo [slm] |
Khatello e theoha @flow[slm] |
Tlanya. ho nepahala [%mv]
@flow[slm] |
E khothalelitsoe phepelo voltage (e lumelletsoe) |
Likarolo tse khethehileng |
| Li-sensor tsa ho felloa ke matla | |||||||
| Likhoune tsa bongaka 22mm (ISO5356-1)
|
SFM3200-AW | · Moea
· O2 · Ho fanoe ka foromo ea motsoako oa Air/ O2 |
-100 ho ea ho +250 | @60: 100Pa @200: 750Pa | @100: 3% | 5V | · Litsela tse peli
· Autoclavable & cleanable · Sefuthumatsi se kopantsoeng ho thibela condensation |
| Proximal flow sensors | |||||||
| SFM3300-D |
|
-250 ho ea ho +250 | @60: 180Pa @200: 1400Pa | @100: 3% | 5V |
|
|
Likhoune tsa bongaka 22mm (ISO5356-1) 15mm (ISO5356-1) |
|||||||
| SFM3300-AW |
|
-250 ho ea ho +250 | @60: 180Pa @200: 1400Pa | @100: 3% | 5V |
|
|
| SFM3304-D |
|
-250 ho ea ho +250 | @60: 100Pa @200: 1150Pa | @100: 3% | 3.3V (3.15 - 3.45V) |
|
|
| SFM3400-D |
|
-33 ho ea ho +33 | @5: 100Pa @25: 900Pa | @33: 3% | 5V |
|
|
| SFM3400-AW |
|
-33 ho ea ho +33 | @5: 100Pa @25: 900Pa | @33: 3% |
|
||
 |
5V | ||||||
Nalane ea ntlafatso
| Letsatsi | Phetolelo | Maqephe | Liphetoho |
| Phupu 2024 | 1.0 | kaofela | Mofuta oa pele |
© Copyright Sensirion AG
Litokomane / Lisebelisoa
 |
Li-Sensors tsa Phallo ea Khase ea SENSIRON SFM3 [pdf] Buka ea Mong'a SFM3003-CL, SFM3003-CE, SFM3003-CET, SFM3013-CL, SFM3013-CLM, SFM3019, SFM3020, SFM3200, SFM3 Series Sensors Flow Gas, SFMlow Series Sensors, Gas Sensors |
