Sensata Technologies NMS100 Series Serial Readout System

MOEKETSI MOSEBETSI

Lethathamo la lintlha tsa NMS100
Ho bala ka serial

Tlhaloso

Motlakase

Taelo ea EU 73/23/EEC (Moqtage Directive)
BS EN 55022:1998 Sehlopha sa B
BS EN 61326-1:2021 E1
Kena ho Yuniti ea Phepelo ea Matla (E Fanoe)
100-240V (47-63Hz)
External switch-mode – Output voltag15VDC
Keletso Voltage ho NMS100 12-27VDC ±10%
E lumellana le Phallo e tlasetage Directive

Ea nama

Bophahamo 104mm (4.1”)
Botebo ba 90mm (3.54”)
Bophara 200mm (7.87”)
Boima ba 'mele 0.5kg (1.1lb)

Tikoloho

Boemo ba Tlelaemete

Sebaka sa polokelo Mocheso -20°C ho isa ho 70°C
Mocheso oa ho sebetsa 0°C ho isa ho 55°C
Mongobo o sebetsang 80% RH ho 30°C

Tšireletso ea IP-Ingress

IP40 E eme U le Mong, IP54 Panel e behiloe

Kamohelo

CE, UKCA

Ho lahla

Qetellong ea bophelo ba eona, ka kopo lahla sistimi ea NMS100 ka mokhoa o bolokehileng o sebetsang thepa ea motlakase
Se chese.
Casework e loketse ho sebelisoa hape. Ka kopo sheba melao ea lehae mabapi le ho lahloa ha lisebelisoa tsa motlakase

Kenyeletso le Qeto

Ke li-encoder tsa Spherosyn Serial kapa tsa Microsyn Serial feela tse ka sebelisoang ka NMS100 Serial DRO

Liqeto tsa Pontšo

Spherosyn/Microsyn 10µ

Lethathamo la 5μm (0.0002")
10μm (0.0005”)

Setšoantšo sa Microsyn 5µ

1µm (0.00005"); 2µm (0.0001"); 5μm (0.0002"); 10μm (0.0005”)

Newall Measurement Systems Limited e na le tokelo ea ho etsa liphetoho ho tlhaloso ena ntle le tsebiso

Likhetho tsa ho kenya

Likhetho tsa Mount tse ikemetseng

Phanele Mount Khetho

Lintlha tsa khokahano

Lintlha tsa Bohlokoa

NMS100 e sebetsa feela le li-encoder tsa Newall Spherosyn Serial le Microsyn Serial. Nakong ea ho kenya, ho bohlokoa ho etsa bonnete ba hore:

• Sireletsa lithapo tsohle ho thibela likhokahano ho oela maemong a kotsi (mohlalaample fatshe kapa terei e phodisang) ha di sa polaka.
• Tsamaisa lithapo tsohle ho thibela hore li se tšoaroe ke likarolo tse tsamaeang.
• NMS100 e theiloe mochining, ho sebelisoa loto e lohiloeng ea motheo e fanoeng, pele phepelo ea mochini e buloa.
• Matla a khaotsoe, pele li-encoder li hokeloa. Se ke oa hokela yuniti ena ka kotloloho ho phepelo ea motlakase.

Lihokelo

Pontsho le letlapa la dikonopo

Ho utloisisa Pontšo

Ho utloisisa Keypad

Ho theha yuniti

Mokhoa oa ho tsamaisa

Mokhoa oa ho kenya setup

Ho theha yuniti

Matšeliso a Phoso

Sistimi ea ho bala ka dijithale (DRO) e thusa ho ntlafatsa tlhahiso. E fokotsa palo ea likarolo tse lahliloeng, kaha ha ho na taba mabapi le ho etsa liphoso tse amanang le ho bala liphetohelo tsa li-dial. Sistimi ea DRO e boetse e thusa ho tlosa liphoso tse ling tse amanang le bolo-screw backlash.

Sistimi ea DRO e tla sebetsa ka nepo ea eona e phatlalalitsoeng, ha feela likarolo tsohle li hlophisitsoe hantle 'me li kentsoe hantle. Ho lekanya sebaka ha ho hlokahale.
Mathata a ho nepahala ka likarolo tse entsoeng ka mochini a ka bakoa ke phoso ea mochini, ho se nepahale ha mochini, kapa ho kopana ha tsona ka bobeli. Mohato oa pele oa ho fumana mohloli oa phoso ke ho hlahloba tsamaiso ea DRO. Ho etsa sena bapisa motsamao oa hlooho ea 'mali oa Newall le boemo ba 'malo bo bontšitsoeng ponts'o. Ho hlokahala maemo a phahameng a ho nepahala, joalo ka laser interferometer. Letšoao la ho daela le ka sebelisoa ho lekola libaka tse khutšoane, empa laser e fana ka liphetho tse ntle ka ho fetisisa. Haeba letšoao la ho daela le tlameha ho sebelisoa, etsa bonnete ba hore ke boleng bo phahameng ka ho fetesisa bo fumanehang.

Ho lekola ho nepahala ha sistimi ea DRO:

1. Beha sepheo sa laser kapa nale ea letšoao la ho daela ka ho toba hloohong ea Newall. Ho bohlokoa haholo hore lipalo li nkuoe ka kotloloho ho hlooho ea 'mali oa Newall. Haeba letšoao la ho daela le tlameha ho sebelisoa, etsa bonnete ba hore nale ea pontshi ke perpendicular ho hlooho ea 'mali mme ha e na angled. Haeba ho baloa kae kapa kae mochining, liphoso tsa mochini li ka khopamisa liphetho.
2. Ha hlooho ea 'mali e tsamaea, mokhatlo o ngolisa ka laser / indicator le pontšo ea DRO.
3. Beha sesupo sa laser / daela le lipontšo tsa boemo ba DRO ho 0.
4. Etsa letoto la metsamao 'me u bapise lipalo tsa boemo lipakeng tsa laser / dial indicator le pontšo ea DRO. Haeba lipalo li lumellana le ho nepahala ho boletsoeng, ho paka hore sistimi ea DRO e sebetsa hantle. Haeba ho le joalo, tsoela pele ho mohato o latelang: ho hlahloba liphoso tsa mochine. Haeba lipalo li sa lumellane, tsamaiso ea DRO e tlameha ho lokisoa pele e tsoela pele ka matšeliso a phoso.

Ho lekola liphoso tsa mochini:

1. Beha laser target / dial indicator karolong ea mochine moo mochine o etsoang teng.
2. Etsa letoto la metsamao 'me u bapise lipalo tsa boemo lipakeng tsa laser / dial indicator le pontšo ea DRO. Phapang pakeng tsa ho bala ha laser / dial indicator le ho bala ponts'o ea DRO ke phoso ea mochine.
3. Rala phoso ea mochini ho latela axis eohle ea maeto ho fumana mofuta oa phoso. Haeba e le phoso ea linear, sebelisa matšeliso a phoso. Haeba phoso e sa tloaeleha, sebelisa matšeliso a arotsoeng ka phoso.

Mefuta ea Phoso ea Mochini

Ho na le mefuta e mengata ea liphoso tsa mochini, ho kenyeletsoa sekontiri se phahameng, roll, yaw, flatness, ho otloloha, le phoso ea Abbé. Litšoantšo tse ka tlase li bontša liphoso tsena.

Matšeliso a Phoso ea Linear

Ka mokhoa ona, ho sebelisoa ntho e le 'ngoe ea tokiso e sa khaotseng bakeng sa axis e' ngoe le e 'ngoe bakeng sa litekanyo tsohle tse bonts'itsoeng.
Bala ntlha ea tokiso, 'me u e hlalose ka likarolo ho milione (ppm).

Ha u latela ts'ebetso, etsa bonnete ba hore ho sebelisoa maemo a hatelitsoeng, 'me u atamele moeli o mong le o mong ho tloha ka lehlakoreng le le leng; kapa haeba ntlha e 'ngoe le e 'ngoe e tlameha ho atameloa ho tloha mahlakoreng a fapaneng, joale tlosa bophara ba sesebelisoa kapa probe ea ho metha ho boleng bo bontšitsoeng ho NMS300.

Mesebetsi e tloaelehileng

RS232 Output Data Format

Lintlha tse hlahisoang bakeng sa RS232 li tjena;
Lintlha tsa morao-rao tsa axis bakeng sa li-axes tse fumanehang tsamaisong e fetisitsoeng.
Mehaho ea Pakete ea data ea litlhaku tse 12 e hlalosoa ka tsela e latelang:

ID ea Axes ke setšoantšo sa axis ka nako ea khatiso. Sena se tla bontšoa ke tšōmo e behiloeng bakeng sa axis ka nako eo.

Tataiso ea ho rarolla mathata

Letšoao

Tharollo

Pontšo ha e na letho

• NMS100 e kanna ya ba mokgweng wa ho robala. Tobetsa konopo efe kapa efe ho tsoa boemong ba ho robala • Lekola hore na motlakase o hoketsoe ka nepo mocheng oa motlakase o sebetsang • Hlahloba hore na likhoele tsa phepelo ea motlakase ha lia senyeha • Hlahloba hore na matla a matla a mangatatage ke 15 - 24Vdc ±10%

Pontšo ea sebetsa, empa e beha bocha nako le nako ntle le ho tobetsa linotlolo.

Kapa phepelo voltage e tlase haholo, kapa phepelo ea motlakase kapa mains e na le fau ea nakoana • Hlahloba hore na matla a matla a mangatatage ke 15 - 24Vdc ±10%. • Hlahloba hore dikgokelo tsohle di bolokehile.

Pontšo ea sebetsa, empa e fana ka lipalo tse sa tsitsang, li-jitter tsa linomoro tsa ho qetela kapa litekanyo li tlolela ho lipalo tse ncha ho sa lebelloa.

Ho ka 'na ha e-ba le khokahano e mpe ea lefatše (fatše). Ka bobeli NMS100, le mochini o kentsoeng, li tlameha ho ba le likhokahano tse nepahetseng tsa lefatše (fatše). Ho kanna ha ba le bothata ka sekhouto.

Yuniti ha e arabele ha ho tobetsa konopo.

Hakolla NMS100 phepelong ea eona ea motlakase, ema metsotsoana e 15 ebe u hokela hape.

'NO Sig' / 'SIG FAIL' kapa '1.x' e hlaha skrineng.

Sena se bontša hore yuniti ha e fumane lets'oao le nepahetseng ho tsoa ho encoder. • Hlahloba hore na dikgokelo tsa encoder di bolokehile. • Hlahloba hore na ha ho na tshenyo ho dihokelo kapa ho sekhoudara. • Tima NMS100 mme o boele o e bulele hape.

Ho bala ha hoa nepahala.

• Lekola Mofuta wa Encoder ho netefatsa hore o nepahetse. • Sheba boemo ba Radius / Diameter. Boemo ba Diameter bo etsa hore axis e bale habeli. • Sheba lintlha tsa Matšeliso a Phoso. • Haeba o sebelisa Matšeliso a Phoso a Arotsoeng, netefatsa boemo ba datum. • Hlahloba hore na ha ho na tšenyo ho encoder kapa thapo ea eona. • Lekola hore na sekhoudara se tsitsitse ka thata le hore se tsamaisana hantle, joalo ka ha ho hlalositsoe bukeng ea ho Kenya ea Spherosyn / Microsyn. • Hlahloba hore na ha ho na tlamo sekaleng. Ha li-brackets tsa sekala li theohile hanyenyane, u ka khona ho thellela sekala pele le morao ka khanyetso e fokolang. • Haeba sekala sa Spherosyn se sebelisoa, hlahloba hore na sekala ha sea kobeha, ka ho se ntša le ho se phutholla sebakeng se bataletseng.

Haeba litharollo tse hlahisitsoeng ka holimo li sa rarolle bothata, ikopanye le Newall bakeng sa litaelo tse ling.

Ho fapanyetsana li-encoder ho fumana phoso:

1. Lekola hore axis e hlophisitsoe ho mefuta e nepahetseng ea likhoutu.
2. Hakolla phepelo ea motlakase ea NMS100.
3. Hakolla sekhoutara ho tloha ho axis e sa sebetseng hantle 'me u fallele sebakeng se sebetsang.
4. Hokela hape phepelo ya motlakase ya NMS100 mme o bulele.

Haeba phoso e lula ho encoder e le 'ngoe, encoder e na le phoso. Haeba phoso e sa latele sekhouto NMS100 e na le phoso.
Ho fana ka mochine ha o so suthisoe ho feta 6.3mm (0.25 ”) bakeng sa encoder ea Spherosyn kapa 2.5mm (0.1”) bakeng sa encoder ea Microsyn,
ho tima motlakase le ho bulela hape ha ho lahleheloe ke boemo ba datum.

Li-datasheets tse fanoeng ke Sensata Technologies, Inc., lithuso tsa eona le/kapa balekane (“Sensata”) li reretsoe feela ho thusa batho ba boraro (“Bareki”) ba ntseng ba etsa litsamaiso tse kenyelletsang lihlahisoa tsa Sensata (tseo hape li bitsoang "likaroloana"). . Moreki oa utloisisa ebile oa lumela hore Moreki o lula a ikarabella bakeng sa ho sebelisa tlhahlobo ea hae e ikemetseng, tekanyetso le kahlolo ho rala litsamaiso le lihlahisoa tsa Moreki. Li-database tsa Sensata li entsoe ho sebelisoa maemo a tloaelehileng a laboratori le mekhoa ea boenjiniere. Sensata ha e so etse tlhahlobo efe kapa efe ntle le e hlalositsoeng ka kotloloho tokomaneng e hatisitsoeng bakeng sa database e itseng. Sensata e kanna ea etsa litokiso, lintlafatso, lintlafatso, le liphetoho tse ling ho database kapa likarolo tsa eona ntle le tsebiso.
Bareki ba na le tumello ea ho sebelisa lipampiri tsa Sensata tse nang le karolo (li)karolo ea Sensata e bonts'itsoeng lethathamong le leng le le leng. Leha ho le joalo, HA HO LAesense E MONG, E BONANG KAPA E BONANG, KA ESTOPPEL KAPA HO HLAKGANG HO E MANG KAPA E MONG EA SENSATA EA TLHOKOMELISO EA SENSATA, HONA HA HO LAesense efe kapa efe ea THEKNOLOJI YA MOKHATLO WA BORARO KAPA TOKELO YA THEPA YA BOHLALE, E NEHANG MONA. LITŠOANTŠISO TSA SENSATA LI FUMANA “JOALOKAHA LI LE”. SENSATA HA E ETSE LITIISETSO KAPA EMELI MABAPI LE LITŠOANTŠISO KAPA TŠEBELETSO EA LITŠOANTŠISO, TSE BONANG, TSE BONANG, KAPA MOLAO, HO kenyeletsoa HO NEPA KAPA HO PHETHAHETSENG. SENSATA E HLOKOMELA TIISETSO EFE KAPA EFE EA SEHLOOHO LE LITIISETSO TSE FELENG TSA KHOETSO, HO LOKELA BAKENG SA MORERO O KHETHEHILENG, THABISO E KHUTŠO, THUTO E KHUTŠO, LE HO SA TLOETSOE HO SEBELISA MOKHOA O MONG O MONG OA MOLAO O MANG KATENG HO SEBELISA HO HLOKAHALA TSA.

Lihlahisoa tsohle li rekisoa ho latela lipehelo le lipehelo tsa thekiso tsa Sensata tse fanoeng ho www.sensata.com. SENSATA HA E NKA MORAMO BAKENG SA THUSO YA LIKOPO KAPA MORARO OA LIHLAHISO TSA BATHO. Moreki O A KANA LE HO LUMELLA HORE KE E FEELA E NA LE BOIKARABELO BA HO LAPELA LITLHAKISO TSOHLE TSA MOLAO, MOLAO, LE TŠEBELETSO MABAPI LE LIHLAHISO TSA LONA, LE TŠEBELETSO EFE KA EFE EA LITLHAKISO TSA SENSATA HO TLALEHONG TSE LING TSA TEBELLO EA EONA KOU E KA FUMANA KE SENSATA .

Aterese ea Lengolo: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA

ITEANYE LE RONA

Amerika
Lethathamo la lintlha tsa NEWALL Electronics Inc.
1803 OBrien Rd
Columbus, OH 43228
Mohala: +1 614 771 0213
sales@newall.com
newall.com
Lefatšeng Lohle:
Newall Measurement Systems, Ltd. Business Park, Unit 1 Wharf Way Glen Parva, Leicester LE2 9UT United Kingdom
Mohala: +44 (0) 116 264 2730
sales@newall.co.uk
newall.co.uk

Copyright © 2023 Sensata Technologies, Inc.

 

Litokomane / Lisebelisoa

Sensata Technologies NMS100 Series Serial Readout System [pdf] Bukana ea Mosebelisi NMS100 Series Serial Readout System, NMS100 Series, Serial Readout System, Readout System

Litšupiso

• Bukana ea Mosebelisi