Khetha Blinds FSK 15 Channel Remote Control Programming

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Mohlala:
• Mohloli oa Matla:
• Mofuta oa Taolo ea Remoutu:
• Likhetho tsa Lebelo: Bonyane, Bo phahameng, bo Fetohang

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho eketsa Remote Control

1. Ho remoutu ea hajoale, tobetsa konopo e le 'ngoe ea P2 ho fihlela motor e matha x1 le beps x1.
2. Pheta mokhoa o ts'oanang ho remoutu ea hajoale.
3. Ho remoutu e ncha, tobetsa konopo e le 'ngoe ea P2 ho fihlela motor e matha x2 le beps x3.

Ho hlophisa Taolo e Ncha ea Remoutu
Latela litaelo tlas'a karolo ea 1. Para / Unpair Remote Control.

Ho fetola lebelo la koloi

Eketsa Lebelo la Motor

1. Tobetsa konopo e le 'ngoe ea P2 ho fihlela koloi e matha x1 'me e beps x1.
2. Tobetsa konopo ea Holimo ho fihlela koloi e matha x2 'me e beps x1.

Fokotsa lebelo la koloi

1. Tobetsa konopo e le 'ngoe ea P2 ho fihlela koloi e matha x1 'me e beps x1.
2. Tobetsa konopo ea Down ho fihlela motor e matha x2 le beps x1.

LBH:

Ho batle phoso

• Bothata: Motlakase ha o na Karabelo
  • Lebaka: Betri e ka har'a enjene e felile kapa ha e lekane ho tjhaja ho tsoa ho Solar Panel.
• Tharollo: Chaja hape ka adaptara ea AC e lumellanang 'me u hlahlobe khokahano le boemo ba solar panel. Sheba khokahano le mokhoa oa ho tsamaisa solar panel.
  • Lebaka: Betri ea remoutu e ea tsoa kapa ha e kentsoe hantle.
• Tharollo: Tlosa betri kapa u hlahlobe sebaka sa eona.
  • Lebaka: Tšitiso ea seea-le-moea / tšireletso kapa sebaka sa moamoheli se hole haholo.
• Tharollo: Netefatsa hore remoutu le lenakana le enjeneng li behiloe hole le lintho tsa tšepe. Tsamaisa remote sebakeng se haufi.
  • Lebaka: Ho hloleha ha matla kapa lithapo tse fosahetseng.
• Tharollo: Sheba hore motlakase o hoketsoe/o sebetsa. Hlahloba hore na wiring e hokahane hantle.
  • Bothata: Motor Beeps ka makhetlo a 10 ha e sebelisoa
• Lebaka: Matla a betritage tlase/Taba ea Solar Panel.
  • Tharollo: Chaja hape ka adaptara ea AC kapa hlahloba khokahano le boemo ba solar panel.

PUSELETSO RETS'ELAVIEW

Ka kopo bala pele o kenya le ho sebelisa. Boloka litaelo tsena bakeng sa ho li sebelisa nakong e tlang.

LIKONANE LITS'ELISO

P1 KOTANE LEBAKA

TS'ELISITSOE BETRI

• a. Ka bonolo kenya sesebelisoa sa ejector se kenyellelitsoeng lesobeng la lesoba 'me u sebelise khatello e nyane sekoahelong ebe u thella sekoaelo.
• b. Kenya betri (CR2450) ka lehlakoreng le letle (+) le shebile holimo.
• c. Ka bonolo thellela sekoahelo morao ho fihlela molumo oa "tobetsa" o utloahala.

TLHOKOMELISO E TSOANG – THIBA LIMIT SETSING

• a. Tlosa sekoaelo karolong e ka morao ea remote, senotlolo sa senotlolo se hukung e nepahetseng.
• b. Tsamaisa switch ho ea sebakeng sa "Lock" ho tima litaelo tse latelang, remote e tla bontša "L" (notlolo):
  • Fetola Tataiso ea makoloi
  • Ho Beha Moeli o ka Holimo le o ka Tlase
  • Fetola Moedi
  • Roller Mode kapa Sheer Mode
• c. Tsamaisa swichi sebakeng sa "Notlolola" ho lekola lits'ebetso tsohle tse hole, remoutu e tla bontša "U" (notlolola).

* Karolo ena e tsoetseng pele e reretsoe ho sebelisoa kamora hore mananeo ohle a moriti a phetheloe. Mokhoa oa mosebelisi o tla thibela phetoho e sa reroang ea meeli.

KHALE LIKHETHONG

KHETHANG KHALE

• a. Tobetsa "<" konopo ho remoutu ho khetha mocha o tlase.
• b. Tobetsa konopo ea ">" ho remoutu ho khetha mocha o holimo

PATA MEKHOA E SA SEBELISENG

• a. Tobetsa 'me U tšoare (hoo e ka bang metsotsoana e 3) "<" le ">" ka nako e le 'ngoe ho fihlela remote control e hlahisa "C" (channel).
• b. Tobetsa konopo ea "<" kapa ">" ho khetha palo e hlokahalang ea kanale (pakeng tsa 1 ho isa ho 15).
• c. Tobetsa konopo ea "Emisa" ho netefatsa khetho (mohlalaample bonts'a khetho ea likanale tse 5). LED e tla hlahisa "O" (OK) hang ho netefatsa khetho.

REA QALA

Ho bohlokoa ho netefatsa hore enjene e falimehile ebile e ikemiselitse ho amohela mananeo. Ho etsa sena, tobetsa konopo ea "P1" ho enjene e ka tlase ho motsotsoana o le mong, ho kenya enjene ho tsoa Mokhoa oa Boroko.

SEBELISA / UNPAIR REMOTE TAOLI

HLOKOMELA: Mahe a linotsi le Horizontal Blind Motors SE KE UA BEEP.

• Tobetsa konopo ea "P1" (hoo e ka bang 2 sec) hloohong ea enjene ho fihlela motor e matha x1 le beeps x1*.
• b Metsotsoaneng e latelang e 10, tobetsa 'me u hatelle konopo ea "Emisa" ho remote control ho fihlela motor e matha x2 le beeps x3*.

Pheta ts'ebetso e ts'oanang ho hlakola remote control.

FETOHA MOTOR DIRECTION (HAE HLOKAHALA)
Ts'ebetso ena e sebetsa feela ha ho se na meeli. Haeba enjene e na le meeli e holimo le e tlase e behiloeng, o ka fetola tsela feela ka ho tobetsa konopo ea "P1" (hoo e ka bang metsotsoana e 10) hloohong ea motor ho fihlela motor jog x3 le beep x3.

• Tobetsa konopo ea "Holimo" kapa "Down" ho bona hore na moriti o leba moo u batlang.
• b Haeba o hloka ho kgutlisetsa tsela, tobetsa o hatelle (hoo e ka bang metsotsoana e 2) "Hodimo" le "Down" ka nako e le nngwe ho fihlela motor e matha x1 le beeps x1.

HO BEHA MEELI E PHAHAMENG LE E TLASE

PHETHA MOELI

• Tobetsa konopo ea "Holimo" ho phahamisa moriti, ebe o tobetsa konopo ea "Emisa" ha e le moeling o ka holimo o lakatsehang.
• b Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Holimo" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x2 le beeps x3.

PHETHA MOELI

• Tobetsa konopo ea "Down" ho theola moriti, ebe o tobetsa konopo ea "Emisa" ha e le moeling o lakatsehang o tlase.
• b Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Down" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x2 le beeps x3.

Haeba u tsoa ho boemo ba ho beha moeli pele u qeta litlhophiso tsa moeli, motlakase o tla nka meeli e fetileng e teng.

FETOLA MELIKO

FETOLELA MOLIKO

• Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Holimo" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x1 le beeps x1.
• b Sebelisa konopo ea "Holimo" ho phahamisetsa moriti sebakeng seo u se batlang, 'me u sebelise konopo ea "Holimo" kapa "Down" ho etsa tokiso ea ho qetela ha ho hlokahala.
• c Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Holimo" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x2 le beeps x3.

FETISISA MOEKETSI

• a Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Down" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x1 le beeps x1.
• b Sebelisa konopo ea "Down" ho theola moriti sebakeng se lakatsehang, 'me u sebelise konopo ea "Holimo" kapa "Down" ho etsa tokiso ea ho qetela ha ho hlokahala.
• c Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Down" le "Emisa" ka nako e le 'ngoe ho fihlela motor e matha x2 le beeps x3.

RATANG SEEMO

SETELA PAKO E RATOANG

• a Sebelisa konopo ea "Holimo" kapa "Down" ho isa moriti sebakeng seo u se ratang.
• b Tobetsa 'me u tšoare konopo e le 'ngoe ea "P2" ka morao ho remote control ho fihlela motor e matha x1 le beps x1.
• c Tobetsa o hatelle konopo ea “Emisa” ho fihlela motor e matha x1 le beps x1.
• d Hape, tobetsa konopo ea "Emisa" ho fihlela motor e matha x2 le beeps x3.

SEBELISA MAEMO A RATANG
Tobetsa o hatelle (hoo e ka bang 2 sec) konopo ea "Emisa", enjene e tla ea sebakeng seo u se ratang.

TS'ELISENG MOEMO

• Tobetsa konopo e le 'ngoe ea "P2" ho fihlela koloi e matha 'me e lla x1.
• b Tobetsa (hoo e ka bang 2 sec) "Emisa" konopo ho fihlela motor e matha le beeps x1.
• c Hape, tobetsa konopo ea "Emisa" ho fihlela motor e matha x1 le beep x1 e telele.

MOKHOA OA HO FETOHA HO TSOA MOKHOENG OA ROLLER / SHEER MODE

ROLALA MORITI - Mokhoa oa kamehla, o lumella ho phahamisa / ho theola moriti khafetsa ka mor'a khatiso e khuts'oane

• Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Holimo" le "Down" ka nako e le 'ngoe ho fihlela motlakase o matha x1.
• b Tobetsa o hatelle (hoo e ka bang metsotsoana e 2) "Emisa" ho fihlela motor e matha x2 le beeps x3.

Bakeng sa taolo le tokiso e nepahetseng, sebelisa Sheer Shade Mode.

MOKHOA OA MORITI - E lumella phetoho e nyane ka mor'a khatiso e khutšoanyane le ho phahamisa / ho theola moriti ka mor'a mochine o molelele

• a Tobetsa o hatelle (hoo e ka bang metsotsoana e 5) "Holimo" le "Down" ka nako e le 'ngoe ho fihlela motor jog x1.
• b Tobetsa o hatelle (hoo e ka bang metsotsoana e 2) "Emisa" ho fihlela motor jog x1 le beep x1.

KEKELETSO MOLAOLI

HO SEBELISA TAOLAO E TENG E TENG

• a Remoutu ea hajoale, tobetsa konopo e le 'ngoe ea "P2" ho fihlela motor e matha x1 le beps x1.
• b Hape, ho remote control ea hajoale, tobetsa konopo e le 'ngoe ea "P2" ho fihlela motor e matha x1 le beps x1.
• c Ho Remoutu e Ncha, tobetsa konopo e le 'ngoe ea "P2" ho fihlela motor e matha x2 le beeps x3.

Pheta mokhoa o ts'oanang ho eketsa/tlosa taolo e eketsehileng ea remote.

HO HLOMELA TAOLI E NCHA

Latela litaelo tlas'a karolo ea 1. Para / Unpair Remote Control

FETISISA LEBELO MOTHO

EKETSANG MOTHO LEBELO

• Tobetsa konopo e le 'ngoe ea "P2" ho fihlela motor jog x1 le beep x1.
• b Tobetsa konopo ea “Holimo” ho fihlela motor jog x1 le beep x1.
• c Hape, tobetsa konopo ea "Holimo" ho fihlela motor jog x2 le beep x1.

Haeba enjene e se na karabelo, e se e ntse e e-na le Maximum kapa Minimum speed.

HLOKOMELA LEBELO

• Tobetsa konopo e le 'ngoe ea "P2" ho fihlela motor e matha x1 'me e beps x1.
• b Tobetsa konopo ea "Down" ho fihlela motor e matha x1 le beeps x1.
• c Hape, tobetsa konopo ea "Down" ho fihlela motor e matha x2 le beeps x1.

Haeba enjene e se na karabelo, e se e ntse e e-na le Maximum kapa Minimum speed.

LITŠOANTŠI TSA TŠEBELETSO LE TŠ

TŠEBELETSO EA KA HARE
Nakong ea ts'ebetso, haeba motlakase o qala ho lla, sena ke pontšo ea ho tsebisa basebelisi hore matla a motlakase a tlaase 'me a hloka ho lefisoa. Ho tjhaja, hokela boema-kepe ba USB bo bonyenyane enjeneng ka har'a tjhaja ea 5V/2A.

PAKA EA KA NTLE E HLAHANG BATTERE
Nakong ea ts'ebetso, haeba voltagE ha e fumanoa e le tlase haholo, betri e emisa ho sebetsa mme e hloka ho nchafatsoa hape. Ho tjhaja, hokela boemakepe ba USB bo bonyenyane qetellong ya pakete ya betri ka hara tjhaja ya 5V/2A.

LIEKETSENG TS'OANELO

Moqtage	3V (CR2450)
Maqhubu a Radio	433.92 MHz mahlakore a mabeli
Matla a ho Fetisa	10 milliwatt
Mocheso oa ho sebetsa	14°F ho isa ho 122°F (-10°C ho isa ho 50°C)
RF Modulation	FSK
Notlela Mosebetsi	Ee
Boemo ba IP	IP20
Sebaka sa phetiso	ho fihla ho 200m (ka ntle)

U se ke ua lahla litšila ka kakaretso.
Ka kopo, sebelisa hape libeteri le lihlahisoa tse senyehileng ka nepo.

POTLAKO TS'OANE

	LIEKETSENG	MEHATO
1.	Ho kopanya	P1 (tšoara 2s) > Emisa (tšoara 2s)
2.	Fetola Tsela e Potolohang	Holimo + Tlase (tšoara 2s)
3.	Beha Meeli e ka Holimo / e Tlase	Holimo Moeli: Ema (tšoara 2s) > Ema + Ema (tšoara 2s) Moeli o tlase: Fatše (tšoara 2s) > Fatše + Emisa (tšoara 2s)
4.	Kenya/Tlosa Maemo ao U a Ratileng	P2 > Emisa > Emisa
5.	Roller / Sheer Mode Switch	Holimo + Tlase (tšoara 5s) > Emisa
6.	Ho Fetola Meeli	Holimo: Ema + Ema (tšoara 5s) > Holimo kapa Dn > Phahama + Emisa (tšoara 2s) Tlase: Dn + Emisa (tšoara 5s) > Holimo kapa Dn > Dn + Emisa (tšoara 2s)
7.	Kenya/Tlosa Remoutu	P2 (e teng) > P2 (e teng) > P2 (e ncha)
8.	Taolo ea lebelo	Eketsa Lebelo la Motlakase: P2 > Hodimo > Hodimo Fokotsa Lebelo la Motlakase: P2 > Tlase > Tlase

TS'ELISO

US Radio Frequency FCC Compliance
Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe kapa tse ling tsa mehato e latelang.

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.

ISED RSS Tlhokomediso
Sesebediswa sena se tsamaelana le Innovation, Saense le Ntshetsopele ya Moruo Canada ditekanyetso tsa laesense tsa RSS. Ts'ebetso e ipapisitse le maemo a mabeli a latelang

1. sesebelisoa sena se ka 'na sa baka tšitiso, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.

15 THULAGANYO YA REMOTE YA TŠEBELETSO LE TATAISO YA BASEBETSI

TŠIRELETSO LITS'ELISO

1. Se ke oa beha enjene sebakeng se mongobo, damp, kapa maemo a mocheso a feteletseng.
2. U se ke ua phunya koloi.
3. U se ke ua khaola antenna. E boloke e hlakile linthong tsa tšepe.
4. Se lumelle bana ho bapala ka sesebelisoa sena.
5. Haeba thapo ea motlakase kapa sehokelo se senyehile, se sebelise
6. Netefatsa hore thapo ea motlakase le antenna li hlakile ebile li sirelelitsoe likarolong tse tsamaeang.
7. Cable e tsamaeang ka marako e lokela ho aroloa hantle.
8. Enjene e lokela ho behoa sebakeng se tšekaletseng feela.
9. Pele o kenya, tlosa lithapo tse sa hlokahaleng 'me u tima lisebelisoa tse sa hlokahaleng bakeng sa ts'ebetso ea motlakase.

TLHOKOMELISO EA BETRI EA KHOPI

1. Tlosa 'me hang-hang u sebelise hape kapa u lahle libeteri tse sebelisitsoeng ho latela melao ea lehae 'me u behelle hole le bana. SE KE UA lahla libeteri ka har'a lithōle tsa ntlo kapa licheseng.
2. Esita le libeteri tse sebelisitsoeng li ka baka kotsi e mpe kapa lefu.
3. Letsetsa setsi sa taolo ea chefo bakeng sa tlhaiso-leseling ea kalafo.
4. CR2450 ke mofuta oa betri o lumellanang.
5. Leshala la leshala la voltagke 3.0V.
6. Libetri tse sa tjhacheheng ha lia lokela ho tjhajwa hape.
7. Se ke oa qobella ho ntša, ho chacha, ho qhaqholla, mocheso o ka holimo ho 50°C / 122°F kapa ho chesa. Ho etsa joalo ho ka baka kotsi ka lebaka la ho tsoa moea, ho lutla kapa ho phatloha ho bakang ho chesoa ke lik'hemik'hale.
8. Netefatsa hore libeteri li kentsoe ka nepo ho latela polarity (+ le -). Se ke oa kopanya libeteri tsa khale le tse ncha, mefuta e fapaneng kapa mefuta ea libeteri, joalo ka alkaline, carbon-zinc, kapa libeteri tse nchafatsoang hape.
9. Tlosa 'me hang-hang u sebelise hape kapa u lahle libetri ho thepa e sa sebelisoeng nako e telele ho latela melao ea lehae.
10. Kamehla sireletsa ka ho feletseng phaposi ea betri. Haeba karolo ea betri e sa koalehe ka mokhoa o sireletsehileng, emisa ho sebelisa sehlahisoa, tlosa libeteri, 'me u li behe hole le bana.

TLHOKOMELO

• KOTSI YA HO NYELA: Sehlahisoa sena se na le konopo ea selefouno kapa betri ea chelete ea tšepe.
• LEFU kapa kotsi e tebileng e ka etsahala ha e nooa.
• Sele e koetsoeng kapa betri ea sele ea tšepe e ka baka
• Ka hare Lik'hemik'hale li Chesa ka nako e ka etsang lihora tse peli.
• BOLOKA libeteri tse ncha le tse sebelisitsoeng HO FIHLELA BANA.
• Batla tlhokomelo ea bongaka hang ha ho belaelloa hore betri e koetsoe kapa e kentsoe ka har'a karolo efe kapa efe ea 'mele.
• CR 2450, 3V

HO BATLE PHOSO

POTLAKO MOTANELO MOTSAMAI

 Hokela Wand - Sheer Shadings, Banded & Roller Shades

Ho Banded Shades, Roller Shades le Sheer Shadings, ka likonopo tsa taolo ea wand tse shebileng ho uena, hokela bokaholimo ba molamu holim'a ts'ehetso ea hook ea tšepe (1) lehlakoreng la taolo ea motor, ebe o hokela thapo hloohong ea enjene (2).

Hlokomela: Ho Sheer Shadings e laetsoeng ka Matla le ka lehlakoreng le letona, thapo e ka phutheloa hokong. Sena se tloaelehile. U ka bula, haeba u lakatsa, kaha sena ha se ame ts'ebetso. O ntse o hloka ho hokela thapo hloohong ea enjene.

 Hokela Wand - Meriti ea khekhe ea linotsi

Moriti oa khekhe ea linotsi, molamu o tla be o se o hokahane le moriti (1). Ka likonopo tsa ho laola wand tse shebileng ho uena, hokela karolo e kaholimo ea molamu ka har'a hoko ea polasetiki e lehlakoreng la taolo ea enjene (2).

Hokela Wand - Meriti e Lohiloeng ea Tlhaho

Ho Natural Woven Shades, ka likonopo tsa ho laola wand tse shebileng ho uena (1) atamela hoko e nang le wand e bapileng le seporo sa hlooho. (2) Sotha thupa ka bonolo ho e hokela hokong. Hokela thapo enjeneng.

Bohlokoa: Pele o qala lenaneo, kenya moriti ho latela litaelo tsa ho kenya tse fanoeng. Meriti ea khekhe ea linotsi e romelloa ka enjene ka mokhoa oa ho robala ho qoba ts'ebetso nakong ea leeto.

Bakeng sa Li-Shades tsa Honeycomb, Ho tsosa enjene pele o sebelisa moriti: Tobetsa konopo ea STOP ka makhetlo a 5 (1) - lekhetlo la pele la 4 tobetsa ka potlako 'me lekhetlo la 5 TLANYA 'me U TŠOETSE konopo ea ho emisa ho fihlela motor jog (2).

Sebetsa Wand

Mokhoa oa Roller le Honeycomb:

• Tobetsa konopo ea DOWN kapa UP ho theola kapa ho phahamisa moriti. Tobetsa STOP ho emisa moriti sebakeng seo o se batlang.
  Sheer Shadings le Banded Shades Mode:
• Ho tlanya konopo ea UP kapa DOWN ka tlase ho metsotsoana e 2 ho tla tsamaisa moriti ka mehato e khutšoane.
• Ho tšoara konopo ea UP kapa DOWN fatše bakeng sa metsotsoana e fetang 2 pele o lokolla ho tla sebelisa moriti ka lebelo le tloaelehileng.
• Tobetsa konopo ea STOP ho emisa moriti sebakeng seo u se batlang.

Beha Maemo ao U a Ratang

BOHLOKOA: Hang ha sebaka seo u se ratang se se se behiloe, moriti o tla lula o ema sebakeng seo u se ratang ka ho fetisisa ha u feta ho sona.
Tobetsa konopo ea 2 x Holimo kapa Tlase, moriti o tla ea ho beha Moedi o ka Holimo kapa o Tlase.

Tlosa Boemo bo Ratoang

Lenaneo le tsoetseng pele
BOHLOKOA: Tšenyo ea moriti e ka 'na ea e-ba teng ha o sebelisa mochine pele o beha meeli. Tlhokomelo e lokela ho fanoa.

Fetoha lipakeng tsa Roller le Sheer Shadings Mode

Fetola moeli o kaholimo le/kapa o ka tlase

Fekther Motor Reset

BOHLOKOA: Meeli eohle e tla hlakoloa. Tataiso ea enjene e tla khutlela ho ea kamehla mme e kanna ea hloka ho lokisoa.

Fetola Litaelo tse UP le TLASE (Hafeela ho hlokahala)

Beha Meeli e ka Holimo le e Tlase (Feela ka mor'a hore Fektheri e Ntlafatsoe Bocha)

Hlahisa Battery

Ha moriti o qala ho sebetsa butle ho feta tloaelo kapa o lla feela ha o leka ho sebetsa, ke nako ea ho tjhaja betri.
Ho Tjhaja, hokela thapo e nyane ya USB e tlwaelehileng ka tlase ho wand (A) le ho phepelo ya motlakase ya USB 5V/2A (max). Lebone le lefubelu la LED leboteng le bontša hore betri ea tjhaja. Ho tjhaja libetri ka botlalo, lumella libeteri ho tjhaja bonyane hora e le 1 ka mor'a hore LED e holim'a wand e be tala.

Hlokomela: Potoloho e tloaelehileng ea tefiso e ka nka lihora tse 4-6.

Ho batle phoso

Litaba	Mabaka a ka khonehang	Tharollo
Moriti ha o arabe	Betri e hahelletsoeng e felile	Hlahisa hape ka adaptara e tsamaellanang ea USB 5V/2A (max) le thapo e nyane ea USB. Lintlha tlas'a "6. Hlahisa Betri”
	Wand ha e ea hokahanngoa ka botlalo le enjene	Sheba kamano pakeng tsa wand le enjene
Moriti o tsamaisa tsela e fapaneng le likonopo tsa taolo	Tsela ea motlakase e khutliselitsoe morao	Sheba lintlha ka tlas'a "Litaelo tse ka tlase le tse ka tlase"
Moriti o ema o le mong pele o fihla moeling o ka holimo kapa o ka tlaase	Ho ile ha behoa sebaka seo u se ratang	Sheba lintlha tlas'a "4. Tlosa Boemo boo U bo Ratang”
Moriti o tsamaea feela ka mehato e menyenyane ka mor'a ho tobetsa konopo	Moriti o sebetsa ho Sheer Shadings/ Banded Shades mode	Fetolela ho Roller/Honeycomb mode ka ho latela mehato e tlas'a "Switch between Roller and Sheer Shadings Mode"
	Moriti ha o na moeli o behiloeng	Sheba lintlha tlas'a "Beha Meeli e ka Holimo le e Tlase"

Litokomane / Lisebelisoa

Khetha Blinds FSK 15 Channel Remote Control Programming [pdf] Bukana ea Mosebelisi FSK 15 Channel Remote Control Programming, FSK, 15 Channel Remote Control Programming, Programming Control Programming, Control Programming

Litšupiso

• Bukana ea Mosebelisi