RENISHAW QUANTiC RKLC40-S Keketseho ea Linear Encoder Tataiso ea ho Kenya Sisteme
Ho boloka le ho sebetsana
Bonyane ba ho kobeha radius
RKLC40-S - 50 limilimithara
HLOKOMELA: Nakong ea polokelo, etsa bonnete ba hore tepi e ikamahanyang le eona e ka ntle ho moo ho kobehang.
Sekala le ho bala hlooho
Readhead feela
Setšoantšo sa QUANTiC redhead install
Bolelele ba lifahleho tse holang. † Tekanyo e tsoang ho substrate
Tataiso ea ho kenya QUANTIC RKLC40-S
HLOKOMELA: Khoele e khothaletsoang ea khoele ke 5 min (7.5 ho kenyelletsa counterbore) mme torque e khothalelitsoeng e tiisang e pakeng tsa 0.25 le 0.4 Nm.
Setšoantšo sa ho kenya sekala sa RKLC40-S
Boemo bo tsoang ho substrate † E fanoe ka 2 × M2 × 4 screws.
LINTLHA TSEO: Khetho ea matšoao a referense le libaka tsa actuator ea moeli li nepahetse bakeng sa mokhoa oa ho bala o bontšitsoeng.
Maqhubu a kantle a makenete a fetang 6 mT, haufi le hlooho e baloang, a ka baka ts'ebetso e fosahetseng ea moeli le li-sensor tsa referense.
Sesebelisoa sa sekala sa RKLC40-S
E loketse:
- RKLC tape scale (bolelele bofe kapa bofe)
Likarolo tse hlokahalang:
- Bolelele bo loketseng ba sekala sa RKLC40-S ('Setšoantšo sa ho kenya sekala sa RKLC40-S', leqepheng la 4)
- Sesebelisoa sa Scale (A-6547-1912)
- Qetella sehlophaamp khiti (A-9523-4015)
- RGG-2 likarolo tse peli tsa sekhomaretsi sa epoxy (A-9531-0342)
- Li-solvents tse loketseng tsa ho hloekisa ('Ho boloka le ho tšoara', leqepheng la 2)
- 2 × M2.5 screws
Likarolo tseo u ka li khethang:
- Renishaw scale wipes (A-9523-4040)
- Lesela le se nang lint
- Sesebelisoa sa mochini oa magnet (A-9653-0201)
- Moeli oa makenete (P moeli - A-9653-0138, Q moeli - A-9653-0139)
- Mokhethi oa letšoao la magnet* (A-9653-0143)
- Guillotine (A-9589-0071) kapa li-shears (A-9589-0133) bakeng sa ho seha RKLC40-S ho bolelele bo hlokahalang.
Sekala sa ho seha
Haeba ho hlokahala, seha sekala ho isa boleleleng u sebelisa guillotine kapa sekere.
Ho sebelisa guillotine
The guillotine e lokela ho ts'oaroa ka mokhoa o sireletsehileng, ho sebelisoa motlatsi o loketseng kapa clampmokhoa oa ho.
Ha e se e sirelelitsoe, fepa sekala sa RKLC40-S ka guillotine joalo ka ha ho bonts'itsoe, 'me u behe sekoti sa guillotine tlase sekaleng. Netefatsa hore boloko bo maemong a nepahetseng (joalo ka ha ho bonts'itsoe).
Ha u ntse u tšoere boloko sebakeng, ka ts'ebetso e boreleli, theola leqhubu ho khaola sekala.
Guillotine press block orientation ha u seha sekala sa RKLC40-S
Ho sebelisa li-chears
Fepa sekala sa RKLC40-S ka sekheo sa pele se sekereng (joalokaha ho bontšitsoe).
Tšoara sekala sebakeng 'me u koale sekere ka mokhoa o boreleli ho khaola sekala.
- Lumella sekala ho ikamahanya le tikoloho ea ho kenya pele ho ho kenya.
HLOKOMELA: Sekala sa RKLC se lokela ho kengoa lipakeng tsa +10 °C le +35 °C ho netefatsa hore sekala se sebetsa hantle. - Tšoaea boemo ba ho qala bakeng sa sekala holim'a substrate ea axis - etsa bonnete ba hore ho na le sebaka sa ho qetela sa clamps ('RKLC40-S sekala sa tlhomamiso', leqepheng la 4).
- Hloekisa ka ho feletseng 'me u tlose karolo e ka tlaase ea mafura u sebelisa lihlapolli tse khothalelitsoeng ('Boloka le ho sebetsana', leqephe la 2). Lumella substrate hore e omelle pele u sebelisa sekala.
- Kenya sekala ho bracket e ntseng e hola hloohong. Beha shim e fanoang ka hlooho e baloang pakeng tsa sesebelisoa le substrate ho beha bophahamo ba lebitso.
HLOKOMELA: Sesebelisoa sa Scale se ka hlongoa ka tsela efe kapa efe ho etsa hore mokhoa o bonolo oa ho kengoa sekala. - Tsamaisa axis ho ea boemong ba ho qala, u siea sebaka se lekaneng sa hore sekala se kenngoe ka har'a sesebelisoa, joalo ka ha ho bonts'itsoe ka tlase.
- Qala ho tlosa pampiri e tšehetsang ho tloha sekaleng ebe u kenya sekala ka har'a sesebelisoa ho ea sebakeng sa ho qala (joalokaha ho bontšitsoe). Netefatsa hore pampiri e tšehelitsoeng e tsamaisoa ka tlas'a sekoti sa splitter.
- Kenya khatello e tiileng ea menoana ka lesela le hloekileng, le omeletseng, le se nang letlapa ho etsa bonnete ba hore sekhahla se khomarela karoloana hantle.
- Butle-butle le ka mokhoa o thellang tsamaisa motlatsi ho pholletsa le sebaka sohle sa maeto, ho etsa bonnete ba hore pampiri e tšehetsang e huloa ka letsoho ho tloha sekaleng 'me ha e tšoase tlas'a motlatsi.
Tataiso ea ts'ebeliso ea sekala
- Nakong ea ho kenya, etsa bonnete ba hore tekanyo e khomaretsoe ho substrate ho sebelisa khatello e khanyang ea menoana.
- Tlosa sesebelisoa ka hloko. Kenya khatello e tiileng ea menoana ka lesela le hloekileng le se nang letlapa ka bolelele ba sekala ka mor'a kopo ho netefatsa ho khomarela ka ho feletseng.
- Hloekisa sekala ka ho hlakola sekala sa Renishaw kapa lesela le hloekileng, le omeletseng le se nang letlapa.
- Fit pheletso clamps ('Qetella clamps, leqepheng la 8).
Qetella sehlophaamps
Qetello clamp kit e etselitsoe ho sebelisoa ka sekhahla sa Renishaw RKLC40-S. E 'ngoe, e tšesaane 6 mm bophara ba pheletso clamps (A-9523-4111), li fumaneha hape.
HLOKOMELA: Qetella sehlophaamps e ka kenngoa pele kapa ka mor'a ho kenya lihlooho tsa ho bala.
- Hloekileng lipheletsong tsa sekala le sebaka seo qetellong clamps li lokela ho kengoa ho sebelisoa litlhaloso tsa sekala sa Renishaw kapa e 'ngoe ea lihlapolli tse khothalelitsoeng ('Boloka le ho sebetsana', leqephe la 2).
- Kopanya ka ho feletseng sachet ea RGG-2 likarolo tse peli tsa epoxy adheisve 'me u sebelise chelete e nyenyane ho ea ka tlaase ho qetellong ea cl.amp.
- Qetello clamp e na le likarolo tse peli tse nyane tsa sekhomaretsi sa ho ikopanya. Tsena li tla tšoara pheletso ka nakoanaamp boemong ha sekgomaretsi se fola. Tlosa theipi e tšehetsang mahlakoreng ka bobeli.
- Hang-hang beha qetellong clamp ho feta qetellong ea sekala le ho sutumelletsa fatše ho etsa bonnete ba ho khomarela ka ho feletseng. Lumella lihora tse 24 ho 20 °C bakeng sa ho fola ka botlalo.
TLHOKOMELISO: Netefatsa hore sekhomaretsi se feteletseng se hlakotsoe ho tloha sekaleng kaha se ka ama boemo ba lets'oao la lihlooho tse baloang.
Ho etsa bonnete ba hore motsamao oa ho qetela o ka tlase ho 1 μm, tsitsisa sistimi bonyane 5 °C ho feta mocheso o phahameng oa kopo ea bareki bakeng sa bonyane lihora tse 8.
Bakeng sa mohlalaampLe: Kopo ea bareki = 23 °C axis mocheso. Tsitsisa tsamaiso ho 28 °C ka bonyane ba lihora tse 8.
Sekhethi sa matšoao a referense le ho fokotsa ho kenya makenete
BOHLOKOA: Lumella lihora tse 24 ka mor'a ts'ebeliso ea sekala pele u kenya limakete.
Bakeng sa ho nepahala le boiketlo ba ho beha mokhethoa oa matšoao a litšupiso le limakenete tse fokotsang, ho lokela ho sebelisoa sesebelisoa sa kopo. Makenete e lokela ho hokelloa sesebelisoa sa sesebelisoa joalo ka ha ho bonts'itsoe. Limakete tsa Limit li ka beoa sebakeng sefe kapa sefe se hlalositsoeng ke mosebelisi haufi le sekala, empa makenete ea khethang letšoao la litšupiso e lokela ho behoa haufi le lets'oao le khethiloeng la IN-TRAC joalo ka ha ho bonts'itsoe.
Ha hlooho ea ho bala ea QUANTiC e fetisa makenete ea khethang letšoao la litšupiso kapa makenete ea switch switch, matla a fihlang ho 0.2 N a hlahisoa lipakeng tsa makenete le li-concentrators hloohong e baloang. Sebopeho sa bracket se lokela ho ba se thata ka ho lekaneng e le hore se khone ho mamella matla a joalo ntle le ho sotha.
Ho latela clampLitaelo tse mabapi le ho kenya sekala li tla thibela matla ana a khoheli ho senya sekala.
Moeli oa ntlha ea ho qhomisa
Sephetho sa moeli se boleloa ka lebitso ha sensor ea "readhead limit limit switch" e fetisa moeli o ka pele oa makenete, empa e ka qala ho fihla ho 3 mm pele ho moeli oo ('RKLC40-S scale installation drawing', leqepheng la 4).
LINTLHA TSEO:
- Limanete tsa litšupiso le moeli li ka 'na tsa thella ha li susumetsoa ke lisebelisoa tsa makenete li le haufi. Maemong a joalo, li lokela ho ts'oaroa li sebelisoa ho sebelisoa fillet e eketsehileng ea sekhomaretsi sa epoxy kapa se tšoanang haufi le moeli o kantle oa kopano ea makenete.
Litšupiso tsa boikhethelo tsa bolted le limakenete tsa moeli lia fumaneha ('RKLC40-S scale installation drawing', leqepheng la 4). - Khetho ea matšoao a referense le libaka tsa actuator ea moeli li nepahetse bakeng sa mokhoa oa ho bala o bontšitsoeng.
- Makenete oa ho khetha letšoao la litšupiso o hlokahala feela bakeng sa lihlooho tse baloang tsa 'Customer selectable reference mark'. Bakeng sa lintlha tse ling, sheba leqephe la QUANTiC ™ la data encoder system (karolo ea Renishaw no. L-9517-9778).
- Maqhubu a kantle a makenete a fetang 6 mT, haufi le hlooho e baloang, a ka baka ts'ebetso e fosahetseng ea moeli le li-sensor tsa referense.
QUANTiC tataiso ea ho qala kapele
Karolo ena ke tataiso e potlakileng ea ho kenya hlooho ea QUANTiC. Lintlha tse felletseng mabapi le ho kenya hlooho ea ho bala li fumaneha leqepheng la 11 le leqepheng la 12 la tataiso ena ea ho instola.
Sesebelisoa sa Advanced Diagnostic Tool ADTi-100* (A-6165-0100) le ADT View software† e ka sebelisoa ho thusa ho kenya le ho lekanya.
KEKETSO
- Netefatsa hore sekala, fensetere ea mahlo e khubelu le lifahleho tse hlonngoeng li hloekile ebile ha li na litšitiso.
- Haeba ho hlokahala, etsa bonnete ba hore makenete ea khethang letšoao la litšupiso e behiloe hantle ('RKLC40-S scale installation drawing', leqepheng la 4).
- Hokela hlooho e khubelu ho amohela lisebelisoa tsa elektroniki le matla-up. Leseli la setaele la LED holim'a hlooho e baloang le tla benya.
- Kenya le ho hokahanya hlooho e khubelu ho eketsa matla a lets'oao holim'a sebaka se felletseng sa maeto joalo ka ha ho bonts'itsoe ke Tala e benyang ea LED.
TS'IRELETSO
- Fetola matla ho isa hloohong e khubelu ho qala mokhoa oa ho lekanya. LED e tla khanya e le 'ngoe e putsoa.
- Tsamaisa hlooho e khubelu sekaleng ka lebelo le liehang (<100 mm/s), ntle le ho fetisa letšoao, ho fihlela LED e qala ho benya boputsoa habeli.
Sistimi e se e hlophisitsoe ebile e loketse ho sebelisoa. Maemo a calibration, Automatic Gain Control (AGC) le Automatic Offset Control (AOC) boemo, li bolokiloe mohopolong o sa fetoheng ha motlakase o theoha.
HLOKOMELA: Haeba calibration e hloleha (LED e lula e le 'mala o moputsoa o le mong), khutlisetsa litlhophiso tsa feme ka ho pata fensetere ea mahlo ha motlakase o phahamisa (leqephe la 13). Pheta mokhoa oa ho kenya le ho lekanya.
Bakeng sa lintlha tse ling sheba Advanced Diagnostic Tool ADTi-100 le ADT View software User Guide (Renishaw karolo no. M-6195-9413) le Advanced Diagnostic Tool ADTi-100 le ADT View software Tataiso ea ho qala ka potlako (karolo ea Renishaw no. M-6195-9321). †
Software ka downloaded bakeng sa mahala ho tloha www.renishaw.com/adt.
Ho kenya hlooho e khubelu le ho tsamaisana
Masakaneng a ho kenya
Borakete e tlameha ho ba le bokaholimo bo sephara 'me e fane ka litokiso ho etsa hore e ikamahanye le mamello ea ho instola, e lumelle ho feto-fetoha ha bophahamo ba hlooho e baloang, le ho satalla ka ho lekaneng ho thibela ho kheloha kapa ho thothomela ha hlooho nakong ea ts'ebetso.
Readhead setup
Netefatsa hore sekala, fensetere ea mahlo le sefahleho se ntseng se hola li hloekile ebile ha li na litšitiso.
HLOKOMELA: Ha u hloekisa hlooho le sekala, sebelisa metsi a hloekisang ka mokhoa o fokolang, u se ke ua inela.
Ho beha bophahamo ba bophahamo ka lebitso, beha sebaka se setala se nang le lesoba tlas'a setsi sa mahlo sa hlooho ho lumella tšebetso e tloaelehileng ea LED nakong ea ts'ebetso ea ho seta. Fetola hlooho ho fumana LED e Tala e benyang ho latela tsela e felletseng ea maeto. Ha sekgahla sa flash se potlaka, se atametse ho setup se nepahetseng. Sesebelisoa sa Advanced Diagnostic Tool ADTi-100 (A-6195-0100) le ADT. View software e ka sebelisoa ho ntlafatsa matla a matšoao lits'ebetsong tse thata. Bona www.renishaw.com/adt bakeng sa lintlha tse ling.
HLOKOMELA: Ha o kenya hape "readhead defaults" ea feme e lokela ho khutlisoa (leqephe la 13)
Litlhahlobo tsa Readhead LED
| Mokhoa | LED | Boemo |
| Mokhoa oa ho kenya | Botala bo benyang | Tlhophiso e ntle, eketsa sekhahla sa flash bakeng sa ho seta hantle |
| Orange e benyang | tlhophiso e fosahetseng, fetola hlooho ea ho bala ho fumana Green flashing LED | |
| Ho benya ho khubelu | tlhophiso e fosahetseng, fetola hlooho ea ho bala ho fumana Green flashing LED | |
| Mokhoa oa ho lekanya | Blue single flashing | Ho lekanya matshwao a ntseng a eketseha |
| Boputsoa bo habeli bo benyang | Letšoao la ho lekanya | |
| Ts'ebetso e tloaelehileng | Boputsoa | AGC e butse, tlhophiso e nepahetseng |
| Botala | AGC e tima, tlhophiso e nepahetseng | |
| Khubedu | tlhophiso e fosahetseng; lets'oao le ka ba tlase haholo bakeng sa ts'ebetso e tšepahalang | |
| Flash e se nang letho | Letšoao la litšupiso le fumanoe (sesupo se bonahalang ka lebelo <100 mm/s feela) |
|
| Alamo | Liphaseli tse 'nè tse khubelu | Letšoao le tlase, lets'oao le fetang, kapa lebelo le fetang; tsamaiso ka phoso |
| Ho benya ho khubelu le Pherese (mofuta oa analogue feela) | AGC ha e maemong a tloaelehileng a ts'ebetso |
Sheba 'Tharollo ea mathata', leqepheng la 14 bakeng sa lintlha tse ling mabapi le ho hlahloba liphoso.
Tekanyo ea tsamaiso
HLOKOMELA: Mesebetsi e hlalositsoeng ka tlase le eona e ka etsoa ka khetho ea ADTi-100 le ADT View software. Bona www.renishaw.com/adt bakeng sa lintlha tse ling.
Pele ho ntlafatso ea sistimi:
- Hloekisa sekala le fensetere ea optical ea ho bala.
- Haeba u instola bocha, khutlisetsa litlhophiso tsa feme ('Restore defaults feme", leqephe la 13).
- Eketsa matla a lets'oao nakong ea leeto le felletseng (leseli la li-readhead set-up LED e benya Botala).
HLOKOMELA: Lebelo le phahameng la calibration 100 mm/s kapa ka tlase ho boholo ba sehlooho, ho sa tsotellehe hore na ke bofe bo liehang ho feta.
Mohato oa 1 - Ho lekanya lets'oao le ntseng le eketseha
- Potoloha matla ho ea hloohong ea ho bala kapa o hokela konopo ea 'Remote CAL' ho 0 V bakeng sa metsotsoana e <3. The eadhead e tla be e le 'ngoe e 'ngoe ea boputsoa ho bontša hore e boemong ba ho lekanya joalo ka ha ho hlalositsoe ho 'Readhead mounting and alignment', leqepheng la 11. Sehlooho se tla kena feela mokhoeng oa ho lekanya ha LED e benya e Tala.
- Tsamaisa hlooho ka lebelo le tlase haufi le axis ho netefatsa hore ha e fete letšoao la referense, ho fihlela LED e qala ho benya habeli ho bonts'a mats'oao a ntseng a eketseha a se a lekanyelitsoe 'me litlhophiso tse ncha li bolokiloe mohopolong oa hlooho.
- Sistimi e se e loketse ho hlophisoa ha matšoao a litšupiso. Bakeng sa lisistimi tse se nang lets'oao la referense, potoloha matla ho ea hloohong kapa o hokela konopo ea 'Remote CAL' ho 0 V bakeng sa metsotsoana e <3 ho tsoa maemong a ho lekanya.
- Haeba sistimi e sa kenye ka bo eona letšoao la referense mohatong oa stage (LED e tsoela pele ho benya ha 'ngoe) ho lekanyetsoa ha matšoao a ntseng a eketseha ho hlolehile. Kamora ho etsa bonnete ba hore ho hloleha ha ho bakoe ke lebelo le fetelletseng (> 100 mm/s, kapa ho feta lebelo le holimo), tlohela mokhoa oa ho lekanya, khutlisetsa liphoso tsa feme joalo ka ha ho hlalositsoe ka tlase, 'me u hlahlobe ts'ebetso ea ho bala le bohloeki ba sistimi pele u pheta mokhoa oa ho lekanya.
HLOKOMELA: Bakeng sa mefuta e fapaneng ea analogue ea QUANTiC netefatsa pheliso e nepahetseng ea matshwao a tlhahiso ('Recommended termination signal', page 18).
Mohato oa 2 - Reference marking phaseing
- Tsamaisa hlooho ho ea pele le pele holim'a letšoao la litšupiso le khethiloeng ho fihlela LED e emisa ho benya 'me e lula e le Boputsoa bo tiileng. Letšoao la litšupiso joale le behiloe ka mekhahlelo.
HLOKOMELA: Ke feela letšoao la litšupiso le khethiloeng le sebelisitsoeng molemong oa ho lekanya le tiiselitsoeng hore le tla lula le eme. - Sistimi e its'oara ka mokhoa o ikhethileng 'me e se e loketse ho sebetsa.
- AGC le AOC li bulela ka bo eona hang ha tlhahlobo e felile. Ho tima AGC bua ka 'Switching Automatic Gain Control (AGC) on or off', leqepheng la 13.
- Haeba LED e tsoela pele ho benya habeli ka mor'a ho fetisa khafetsa lets'oao le khethiloeng, ha e bonoe.
- Netefatsa hore ho sebelisoa tlhophiso e nepahetseng ea lihlooho tsa ho bala. Readheads e ka hlahisa matšoao ohle a litšupiso kapa ea hlahisa feela letšoao la referense moo makenete e khethang litšupiso e kenngoeng ho latela likhetho tse khethiloeng ha o odara.
- Makenete ea ho khetha letšoao la litšupiso e kentsoe sebakeng se nepahetseng mabapi le mokhoa oa ho bala ('RKLC40-S scale installation drawing', leqepheng la 4).
Ho tsoa ka letsoho
- Ho tsoa ho mokhoa oa ho lekanya nako efe kapa efetage potoloha matla ho ea ho bala kapa hokela konopo ea 'Remote CAL' ho 0 V bakeng sa metsotsoana e meraro. Joale LED e tla emisa ho benya.
| LED | Litlhophiso li bolokiloe |
| Blue single flashing | Ha ho letho, khutlisetsa li-default tsa feme le ho nchafatsa |
| Boputsoa bo habeli bo benyang | Keketso feela |
| Boputsoa (e phethehile ka bohona) | Keketso le letšoao la litšupiso |
Ho khutlisetsa litlhophiso tsa feme
Ha o lokisa hlooho ea ho bala, o kenya sistimi hape, kapa ha ho ntse ho tsoela pele ho hloleha ho lekanya, ho tlameha ho khutlisetsoa mefokolo ea feme.
HLOKOMELA: Ho khutlisetsa lits'oants'o tsa feme le hona ho ka etsoa ka khetho ea ADTi-100 le ADT View software. Bona www.renishaw.com/adt bakeng sa lintlha tse ling.
Ho khutlisa li-factory tsa kamehla:
- Tlosa sistimi.
- Sira fensetere ea mahlo e baloang (u sebelisa spacer e fanoeng le hlooho e balang ho netefatsa hore sehiloeng sea etsoa. HLOKOMELA tlas'a fensetere ea optical) kapa hokela konopo ea 'Remote CAL' ho 0 V.
- Matlafatsa hlooho.
- Tlosa spacer kapa, haeba o sebelisa, khokahanyo ho tsoa ho "Remote CAL" pineng ho ea ho 0 V.
- Leseli la LED le tla qala ho khantša ho bontša hore mefokolo ea fektheri e tsosolositsoe 'me sehlooho sa ho bala se boemong ba ho kenya (flashing set-up LED).
- Pheta mokhoa oa 'Readhead set-up' leqepheng la 11.
Ho bulela kapa ho tima Automatic Gain Control (AGC).
AGC e sebetsa ka bo eona hang ha sistimi e se e lekantsoe (e bonts'itsoeng ke Blue LED). AGC e ka tima ka letsoho ka ho hokela konopo ea 'Remote CAL' ho 0 V bakeng sa> metsotsoana e 3 <metsotsoana e 10.
Joale LED e tla ba Botala bo tiileng.
HLOKOMELA: AGC e ka buloa kapa ea tima ho sebelisoa ADTi-100 le ADT ea boikhethelo View software. Bona www.renishaw.com/adt bakeng sa lintlha tse ling.
Ho batle phoso
| Phoso | Lebaka | Litharollo tse ka bang teng |
| LED hloohong e baloang ha e na letho | Ha ho na matla a ho bala |
|
| LED e hloohong e baloang e bofubelu bo benyang nakong ea mokhoa oa ho kenya | Matla a lets'oao ke <50% |
|
| Ha e khone ho fumana LED e Tala ka bolelele bo felletseng ba axis | Ho felloa ke sistimi ha ho ka har'a se boletsoeng |
|
| Ha e khone ho qala mokhoa oa ho lekanya | Boholo ba lets'oao ke <70% |
|
| Nakong ea calibration ea LED ka Readhead e lula e le 'ngoe e benyang Blue esita le ka mor'a ho e tsamaisa hammoho le bolelele bo felletseng ba axis | Sistimi e hlolehile ho lekanya matšoao a ntseng a eketseha ka lebaka la matla a lets'oao a <70% |
|
| Pheliso e fosahetseng (mofuta oa analogue feela) |
|
|
| Nakong ea calibration ea LED ka Readhead e benyang habeli Boputsoa ka mor'a ho e suthisetsa ho feta letšoao la litšupiso ka makhetlo a 'maloa | The readhead ha e bone letšoao la litšupiso |
|
| Phoso | Lebaka | Litharollo tse ka bang teng |
| Ha ho tlhahiso ea letšoao la litšupiso |
|
|
| Letšoao la litšupiso ha le phetehe | Ke feela letšoao la litšupiso le khethiloeng le sebelisitsoeng tatelanong ea calibration le ka phetwang, matshwao a mang a referense a kanna a se bewe |
|
| LED e hloohong e baloang e benya Bofubelu holim'a letšoao la litšupiso | Letšoao la litšupiso ha le hlakisoe |
|
| Ho ntse ho hlahisoa litšupiso tse ngata | Khetho ea letšoao la litšupiso tse baloang ke khetho ea B kapa F, 'Matšoao ohle a referense a hlahisoa' |
|
| LED hloohong e benyang e Bofubelu le Bopherese (mofuta oa analogue feela) | AGC ha e maemong a tloaelehileng a ts'ebetso |
|
| LED hloohong e benyang Red four
linako ho bulela |
Letšoao le tlase, lets'oao le fetang, kapa lebelo le fetang; tsamaiso ka phoso |
|
| Pheliso e fosahetseng (mofuta oa analogue feela) |
|
Lipontšo tsa sephetho
Liphetho tsa dijithale
| Mosebetsi | Letshwao | Mmala | 9-tsela D-mofuta (A) | 15-tsela Mofuta oa D (D) | 15-way D-mofuta o mong oa pin-out (H) | 12-tsela chitja sehokedi† (X) | 14-tsela JST ‡(J) | |
| Matla | 5 V | Brown | 5 | 7, 8 | 4, 12 | G | 10 | |
| 0 V | Bosoeu | 1 | 2, 9 | 2, 10 | H | 1 | ||
| Keketseho |
A |
+ | Khubedu | 2 | 14 | 1 | M | 7 |
| − | Boputsoa | 6 | 6 | 9 | L | 2 | ||
|
B |
+ | Bosehla | 4 | 13 | 3 | J | 11 | |
| − | Botala | 8 | 5 | 11 | K | 9 | ||
| Referense seka |
Z |
+ | Violet | 3 | 12 | 14 | D | 8 |
| − | Hlooho | 7 | 4 | 7 | E | 12 | ||
| Meeli | P | Pinki | – | 11 | 8 | A | 14 | |
| Q | Ntsho | – | 10 | 6 | B | 13 | ||
| Alamo | E | − | namunu | – | 3 | 13 | F | 3 |
| CAL e hole* | KALA | Hlakileng | 9 | 1 | 5 | C | 4 | |
| Thebe | – | Skrine | Nyeoe | Nyeoe | Nyeoe | Nyeoe | Ferrule | |
Liphetho tsa analogue
| Mosebetsi | Letshwao | Mmala | 15-tsela Mofuta oa D (L) | 15-way D-mofuta o mong oa pin-out(H) | 14-tsela JST ‡(J) | ||
| Matla | 5 V | Brown | 4, 5 | 4, 12 | 10 | ||
| 0 V | Bosoeu | 12, 13 | 2, 10 | 1 | |||
| Keketseho |
Cosine |
V1 |
+ | Khubedu | 9 | 1 | 7 |
| − | Boputsoa | 1 | 9 | 2 | |||
|
Sine |
V2 |
+ | Bosehla | 10 | 3 | 11 | |
| − | Botala | 2 | 11 | 9 | |||
| Letšoao la litšupiso |
V0 |
+ | Violet | 3 | 14 | 8 | |
| − | Hlooho | 11 | 7 | 12 | |||
| Meeli | Vp | Pinki | 7 | 8 | 14 | ||
| Vq | Ntsho | 8 | 6 | 13 | |||
| Tlhophiso | Vx | Hlakileng | 6 | 13 | 6 | ||
| CAL e hole* | KALA | namunu | 14 | 5 | 4 | ||
| Thebe | – | Skrine | Nyeoe | Nyeoe | Ferrule | ||
Sehokelo sa mofuta oa 9-way D (khoutu ea ho emisa A)
Sehokelo sa mefuta e 15 ea mofuta oa D (khoutu ea ho emisa D, L, H)
Sehokelo se chitja sa 12-line (khoutu ea ho emisa X)
Sehokelo sa 14-way JST (khoutu ea ho emisa J)
Mohala oa CAL o hole o tlameha ho hokela ho sebelisoa le ADTi-100. †
12-tsela chitja Binder mating soketeng - A-6195-0105. ‡
Pakete ea li-sockets tse 5 14 tsa JST SH:
A-9417-0025 - Thaba e tlase;
A-9417-0026 - Sebaka se ka thōko.
Boholo ba li-cycle tse 20 tsa ho kenya sehokelo sa JST.
Lebelo
Li-redheads tsa dijithale
| Tlisoa khetho ea tlhahiso (MHz) |
Lebelo le phahameng (m/s) |
Bonyane karohano ea moeli* (ns) | ||||||
| T (10µm) | D (5µm) | X (1µm) | Z (0.5 µm) | W (0.2 µm) | Y (0.1 µm) | H (50 nm) | ||
| 50 | 24 | 24 | 24 | 18.13 | 7.25 | 3.626 | 1.813 | 25.1 |
| 40 | 24 | 24 | 24 | 14.50 | 5.80 | 2.900 | 1.450 | 31.6 |
| 25 | 24 | 24 | 18.13 | 9.06 | 3.63 | 1.813 | 0.906 | 51.0 |
| 20 | 24 | 24 | 16.11 | 8.06 | 3.22 | 1.611 | 0.806 | 57.5 |
| 12 | 24 | 24 | 10.36 | 5.18 | 2.07 | 1.036 | 0.518 | 90.0 |
| 10 | 24 | 24 | 8.53 | 4.27 | 1.71 | 0.853 | 0.427 | 109 |
| 08 | 24 | 24 | 6.91 | 3.45 | 1.38 | 0.691 | 0.345 | 135 |
| 06 | 24 | 24 | 5.37 | 2.69 | 1.07 | 0.537 | 0.269 | 174 |
| 04 | 24 | 18.13 | 3.63 | 1.81 | 0.73 | 0.363 | 0.181 | 259 |
| 01 | 9.06 | 4.53 | 0.91 | 0.45 | 0.18 | 0.091 | 0.045 | 1038 |
Lihlooho tsa analogue
Lebelo le phahameng: 20 m/s (−3dB)†
Lihokelo tsa motlakase
Ho theola fatše le ho sireletsa
BOHLOKOA: Thebe e lokela ho kopanngoa le lefats'e la mochine (Field Ground).
Bakeng sa mefuta e fapaneng ea JST ferrule e lokela ho hokahanngoa le lefats'e la mochini.
Boholo ba bolelele ba cable
| Analogue | Dijithale | |
| Mohala oa ho bala | 5 m | 3 m |
| Katoloso e phahameng bolelele ba mohala | E ipapisitse le mofuta oa thapo, bolelele ba thapo ea hlooho le khetho ea tlhahiso ea clocked. Ikopanye le moemeli oa lehae oa Renishaw bakeng sa lintlha tse ling. | |
| Bala hlooho ho ADTi-100 | 5 m | 3 m |
E khothalelitsoeng ho emisoa
Liphetho tsa dijithale
Sekepe se tloaelehileng sa RS422A se amohelang mohala.
Li-capacitor tse khothalelitsoeng bakeng sa ts'ireletso e ntlafetseng ea lerata.
Ho emisoa ha lets'oao le le leng la alamo
(Ha e fumanehe ha thapo ea 'A' e emisoa)
Readhead
Liphetho tsa analogue
HLOKOMELA: Ho felisoa ha 120R ho matšoao a tlhahiso ea analogue ho bohlokoa bakeng sa ts'ebetso e nepahetseng ea AGC.
Lisebelisoa tsa analogue le tsa dijithale
Moeli oa tlhahiso
(Ha e fumanehe ha thapo ea 'A' e emisoa)
Khetha R e le hore boholo ba hona joale bo se ke ba feta 20 mA.
Ntle le moo, sebelisa relay e loketseng kapa optoisolator
Ts'ebetso ea CAL e hole
Ts'ebetso ea hole ea CAL/AGC e ka khoneha ka lets'oao la CAL.
Litlhaloso tsa sephetho
Lipontšo tsa tlhahiso ea dijithale
Foromo - Mokhanni oa phapang oa Square wave ho EIA RS422A (ntle le meeli ea P le Q)
Keketseho Likanale tse 2 A le B ka quadrature (90° phase e fetotsoe)
| Qeto khetho khoutu | P (µm) | S (µm) |
| T | 40 | 10 |
| D | 20 | 5 |
| X | 4 | 1 |
| Z | 2 | 0.5 |
| W | 0.8 | 0.2 |
| Y | 0.4 | 0.1 |
| H | 0.2 | 0.05 |
Referense
HLOKOMELA: Khetho e pharalletseng ea letšoao la litšupiso, e hlahisang molumo oa litšupiso bakeng sa nako ea lets'oao e fumaneha. Ikopanye le moemeli oa lehae oa Renishaw bakeng sa lintlha tse ling.
Meeli
Phallo e bulehileng ea mokelli, asynchronous pulse (Ha e fumanehe ka ho felisoa ha cable ea 'A')
Alamo
E khannoa ka mohala (Asynchronous pulse) (Ha e fumanehe ka thapo ea 'A')
kapa alamo ea linaha tse 3
Matshwao a fapaneng a fetiswang a qobella potoloho e bulehileng bakeng sa> 15 ms ha maemo a alamo a sebetsa.
Lipontšo tsa tlhahiso ea analogue
Likanale tse 2 tse eketsang V1 le V2 li-sinusoids tse fapaneng ka quadrature, tse bohareng ba ~ 1.65 V (90 ° phase shifted)
Referense
Meeli
Open mokelli sephetho, asynchronous pulse
Tlhophiso†
Pakeng tsa 50% le 70% boemo ba pontšo, VX ke potoloho ea mosebetsi.
Nako e sebelisitsoeng ho 3.3 V ea eketseha ka boemo ba matšoao a ntseng a eketseha.
Ho> 70% boemo ba lets'oao la VX ke 3.3 V.
Ke letšoao feela la litšupiso le lekantsoeng le ka phetoang ka mahlakore a mabeli.
Letšoao la ho seta joalo ka ha le bonts'itsoe ha le teng nakong ea ts'ebetso ea ho lekanya
Litlhaloso tse akaretsang
| Matla phepelo | 5V −5%/+10% | Ka tloaelo 150 mA e felisitsoe ka botlalo (sehlahisoa sa analogue) | |
| Ka tloaelo 200 mA e felisitsoe ka botlalo (poelo ea dijithale) | |||
| Matla a tsoang phepelong ea 5 Vdc e tsamaellanang le litlhoko tsa SELV ea maemo a IEC 60950-1 | |||
| Ripple | 200 mVpp boholo @ frequency ho fihla ho 500 kHz | ||
| Mocheso (sistimi) | Polokelo | −20 °C ho ea +70 °C | |
| Ho kenya | +10 °C ho ea +35 °C* | ||
| Ho sebetsa | 0 °C ho ea +70 °C | ||
| Mongobo (sistimi) | 95% ea mongobo o amanang (o sa fokotseheng) ho IEC 60068-2-78 | ||
| Ho tiisa | IP40 | ||
| Ho potlakisa (sistimi) | Ho sebetsa | 400 m/s², lilepe tse 3 | |
| Ho tshoha (sistimi) | Ho sebetsa | 500 m/s², 11 ms, ½ sine, 3 lilepe | |
| Ho thothomela (hlooho) | Ho sebetsa | 100 m/s² max @ 55 Hz ho isa ho 2000 Hz, lilepe tse 3 | |
| (sekala) | Ho sebetsa | 300 m/s² max @ 55 Hz ho isa ho 2000 Hz, lilepe tse 3 | |
| Mmisa | Readhead | 9 g | |
| Cable | 26 g/m | ||
| Ho latela EMC | Tlhaloso: IEC 61326-1 | ||
| Mohala oa ho bala | Thebe e le 'ngoe, bophara ba ka ntle ke 4.25 ±0.25 mm | ||
| Bophelo ba Flex> 20 × 106 lipotoloho ho 30 mm kobe radius | |||
Karolo e tsebahalang ea UL  |
|||
| Boholo ba bolelele | 5 m (analogue) | ||
| 3 m (digital) | |||
| Dikgetho tsa sehokedi | Khoutu - mofuta oa sehokelo | ||
| A – 9-way D-mofuta – Digital tlhahiso feela | |||
| L – 15-way D-type (pin-out e tlwaelehileng) – Tlhahiso ya analogue feela | |||
| D – 15-way D-type (pin-out e tlwaelehileng) – Digital tlhahiso feela | |||
| H - 15-way D-mofuta (pin-out e 'ngoe) | |||
| X – 12-way circular connector – Digital tlhahiso feela | |||
| J - 14-tsela sehokelo JST | |||
| Phoso e tloaelehileng ea karoloana (SDE) | Sephetho sa analogue | Tlhahiso ea dijithale | |
| <±120nm | <±80nm | ||
| TLHOKOMELISO: Sistimi ea Renishaw encoder e entsoe ho latela maemo a EMC a amehang, empa e tlameha ho kopanngoa ka nepo ho fihlela tumellano ea EMC. Ka ho khetheha, ho bohlokoa ho ela hloko litokisetso tsa tšireletso. | |||
Litlhaloso tsa litekanyetso tsa RKLC40-S
| Sebopeho (H × W) | 0.15 × 6 limilimithara (ho kenyeletsoa sekhomaretsi) | |||
| Pitch | 40 μm | |||
| Ho nepahala (ka 20 °C)
(e kenyelelitse moepa le moeli) |
RKLC40-S | ±15 µm/m | ||
| RKLC40H-S | ±5 µm/m | |||
| Linearity | RKLC40-S | ±3 µm/m e ka fihlelleha ka tokiso ea lintlha tse 2 | ||
| RKLC40H-S | ±2.5 µm/m e ka fihlelleha ka tokiso ea lintlha tse 2 | |||
| Bolelele bo fanoeng | 20 mm ho isa ho 20 m (> 20 m e fumaneha ka kopo) | |||
| Lintho tse bonahalang | Litšepe tse thata tsa martensitic tse kenngoeng ka theipi e itsamaisang | |||
| Mmisa | 4.6 g/m | |||
| Coefficient ea katoloso ea mocheso (ka 20 °C) | E tsamaellana le thepa ea substrate ha sekala se fela se tsitsitsoe ke epoxy mounted end clamps | |||
| Mocheso oa ho kenya | +10 °C ho ea +35 °C | |||
| Qetella ho lokisa | Epoxy mounted qetellong clamps (A-9523-4015) Sekhomaretsi se amohetsoeng sa epoxy (A-9531-0342) Motsamao oa ho qetela ka tloaelo <1 µm* | |||
| Letšoao la litšupiso | ||||
| Mofuta | Moreki o khethiloe IN-TRAC letšoao la litšupiso, le kentsoeng ka kotloloho pina e ntseng e eketseha. Ho pheta-pheta boemo ba mahlakore a mabeli | |||
| Khetho | Khetho e le 'ngoe ea letšoao la litšupiso ka selector magnet (A-9653-0143) e behiloe ke moreki. | |||
| L ≤ 100 limilimithara | Letšoao le le leng la litšupiso setsing sa scale | |||
| L> 100 limilimithara | Matšoao a litšupiso sebakeng sa 50 mm (letšoao la pele la tšupiso 50 mm ho tloha pheletsong ea sekala) | |||
| Pheta-pheta | Unit of resolution repeatability (bi-directional) ho pholletsa le lebelo la sistimi e felletseng le mefuta ea mocheso | |||
| Li-switches tse fokolang | ||||
| Mofuta | Li-actuator tsa Magnetic; ka dimple triggers Q moedi, ntle le dimple triggers P limit ('Setšoantšo sa ho kenya sekala sa RKLC40-S', leqepheng la 4) | |||
| Ntlha ea ho qala | Sephetho sa moeli se boleloa ka lebitso ha sensor ea moeli oa ho bala e feta
fokotsa moeli oa makenete, empa o ka qala ho fihla ho 3 mm pele ho moeli oo |
|||
| Ho phahamisa | Moreki o behiloe libakeng tse lakatsehang | |||
| Pheta-pheta | <0.1 limilimithara | |||
| Sekala le pheletso clamps e tlameha ho kenngoa ka mor'a ts'ebetso ea ho instola. | ||||
Sekala le pheletso clamps e tlameha ho kenngoa ka mor'a ts'ebetso ea ho instola.
Litsebiso tsa molao
Copyright
© 2019-2021 Renishaw plc. Litokelo tsohle li sirelelitsoe.
Tokomane ena e ke ke ea kopitsoa kapa ea hlahisoa bocha kaofela kapa ka karolo e itseng, kapa ea fetisetsoa mecheng ea litaba kapa
puo ka mokhoa ofe kapa ofe, ntle le tumello e ngotsoeng pele ea Renishaw.
Matšoao a khoebo
RENISHAW® le lets'oao la probe ke matšoao a ngolisitsoeng a Renishaw plc. Mabitso a sehlahisoa sa Renishaw, mabitso le letšoao la 'apply innovation' ke matšoao a khoebo a Renishaw plc kapa litšehetso tsa eona.
Mabitso a mang a mofuta, sehlahisoa kapa khamphani ke matšoao a khoebo a beng ba ona.
Patents
Likarolo tsa sistimi ea encoder ea Renishaw le lihlahisoa tse ts'oanang ke litaba tsa litokelo tse latelang
le likopo tsa patent:
| EP1173731 | US6775008 | JP4750998 | CN100543424 | EP1766334 |
| JP4932706 | US7659992 | CN100507454 | EP1766335 | IN281839 |
| JP5386081 | US7550710 | CN101300463 | EP1946048 | JP5017275 |
| US7624513 | CN101310165 | EP1957943 | US7839296 | CN108351229 |
| EP3347681 | JP2018530751 | KR20180052676 | US20180216972 | WO2017203210 |
| CN1314511 | EP1469969 | EP2390045 | JP5002559 | US8987633 |
| US8466943 |
Boithorollo
LE HA HO NE HO ETSA BOITEKO JO BO HLOKOMANG HO HLOMELA HO NEPAHA HA TOKOMANE ENA HO PHATISWA, LITEKISO TSOHLE, MAEMO, LITLHAKISO LE MOLAMO KAMOO O KA TSOANG HO HLAHALA KA TENG, LI A KEKETSOE HO FIHLELA BOEMO BA MOLAO O DUMELLOTSENG.
RENISHAW E NA LE TOKELO EA HO ETSA LIPHETOHO TSA TOKOMANE ENA LE HO SEBELISA, LE/KGOTSA SOFTWARE LE TLHALOSO E HLALOSANG MONA KA NTLE LE TABA YA HO FANA TSEBISO KA LIPHETOHO TSE JALO.
Melao le lipehelo le tiisetso
Ntle le haeba uena le Renishaw le lumellane le ho saena tumellano e ngotsoeng e arohaneng, lisebelisoa le/kapa software li rekisoa ho latela Melao le Maemo a Renishaw Standard a fanoeng ka thepa le/kapa software, kapa li fumaneha ka kopo ho tsoa ofising ea lehae ea Renishaw.
Renishaw e fana ka tumello ea lisebelisoa tsa eona le software bakeng sa nako e lekanyelitsoeng (joalo ka ha ho boletsoe ho Melao le Maemo a Tloaelehileng), ha feela li kentsoe le ho sebelisoa hantle joalo ka ha ho hlalositsoe litokomaneng tse amanang le Renishaw. U lokela ho sheba Melao le Maemo a Tloaelehileng ho fumana lintlha tse felletseng tsa waranti ea hau.
Thepa le/kapa software e rekiloeng ke uena ho tsoa ho morekisi oa motho e mong e ipapisitse le lipehelo le lipehelo tse fapaneng tse fanoeng ka sesebelisoa le/kapa software. U lokela ho ikopanya le mofani oa thepa oa hau oa boraro bakeng sa lintlha tse ling.
Ho latela lihlahisoa
Renishaw plc e phatlalatsa hore QUANTiC™ e latela maemo le melawana e sebetsang.
Khopi ea phatlalatso ea EU ea ho lumellana e fumaneha ho rona website at
www.renishaw.com/productcompliance.
Ho latela melao
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Mosebelisi o hlokomelisoa hore liphetoho kapa liphetoho tse sa amoheloeng ke Renishaw plc kapa tse lumelletsoeng.
moemeli a ka hlakola matla a mosebedisi a ho tsamaisa thepa.
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokeha ho lokisa tšitiso eo ka litšenyehelo tsa hae.
HLOKOMELA: Yuniti ena e ile ea lekoa ka likhoele tse sirelelitsoeng lisebelisoa tsa peripheral. Lithapo tse sirelelitsoeng li tlameha ho sebelisoa le yuniti ho netefatsa hore ho latela melao.
Boitsebiso bo eketsehileng
Lintlha tse ling tse amanang le mofuta oa QUANTiC encoder li ka fumanoa ho QUANTiC ™ series encoder.
tsamaiso Data sheet (Renishaw karolo no. L-9517-9778), Advanced Diagnostic Tool ADTi-100 Data sheet (Renishaw karolo no. L-9517-9699), Advanced Diagnostic Tool ADTi-100 le ADT View software User Guide (Renishaw karolo no. M-6195-9413) le Advanced Diagnostic Tool ADTi-100 le ADT View software Tataiso ea ho qala ka potlako (karolo ea Renishaw no. M-6195-9321). Tsena li ka kopitsoa ho rona website at www.renishaw.com/quanticdownloads hape li fumaneha ho tsoa ho moemeli oa sebaka sa heno.
Sephutheloana
| Karolo ea ho paka | Lintho tse bonahalang | ISO 11469 | Tataiso ea ho Recycling |
| Lebokose la ka ntle | Khateboto | Ha e sebetse | E ka sebelisoa hape |
| Polypropylene | PP | E ka sebelisoa hape | |
| Tsekenya | Foam ea polyethylene e tlase | LDPE | E ka sebelisoa hape |
| Khateboto | Ha e sebetse | E ka sebelisoa hape | |
| Mekotla | Mokotla o phahameng oa polyethylene | HDPE | E ka sebelisoa hape |
| Polyethylene e entsoeng ka tšepe | PE | E ka sebelisoa hape |
FIHLELA molao
Lintlha tse hlokoang ke Article 33(1) of Regulation (EC) No. 1907/2006 (“REACH”) tse amanang le lihlahisoa tse nang le lintho tse amehang haholo (SVHCs) li fumaneha ho www.renishaw.com/FINYELLANG.
WEEE litataiso tsa ho sebelisoa hape
Tšebeliso ea letšoao lena lihlahisoa tsa Renishaw le/kapa litokomane tse tsamaeang le tsona li bontša hore sehlahisoa ha sea lokela ho tsoakoa le litšila tsa lelapa ha li lahloa. Ke boikarabello ba mosebelisi ho lahla sehlahisoa sena sebakeng se khethiloeng sa lisebelisoa tsa motlakase le tsa elektroniki (WEEE) ho etsa hore se sebelisoe hape kapa se sebelisoe hape. Ho lahla sehlahisoa sena ka nepo ho tla thusa ho boloka lisebelisoa tsa bohlokoa le ho thibela litlamorao tse ka bang teng tikolohong. Ho fumana lintlha tse ling, ka kopo ikopanye le tšebeletso ea sebaka sa heno ea ho lahlela lithōle kapa
Renishaw distributor.
Tšehetso
Renishaw plc
Mills e Ncha, Wotton-under-Edge
Gloucestershire, GL12 8JR
united kingdom
T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com
Bakeng sa lintlha tsa ho ikopanya le lefats'e, etela www.renishaw.com/contact
Renishaw plc E ngolisitsoe Engelane le Wales. Nomoro ea k'hamphani: 1106260.
Ofisi e ngolisitsoeng: New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR, UK.
Litokomane / Lisebelisoa
 |
RENISHAW QUANTiC RKLC40-S Keketseho ea Linear Encoder System [pdf] Tlhophiso Tataiso QUANTiC RKLC40-S Incremental Linear Encoder System, QUANTiC, RKLC40-S, Keketseho ea Linear Encoder System, Encoder System, Linear Encoder System, Linear Encoder, M-9417-9238-03-D |
