RENESAS DA14535MOD SmartBond TINY Bluetooth LE Module
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- Mohlala: DA14535MOD
- Tumellano ea Maemo:
- Europe (CE/RED)
- UK (UKCA)
- US (FCC)
- Canada (IC)
- Japane (MIC)
- Korea Boroa (KCC)
- Taiwan (NCC)
- Brazil (Anatel)
- Afrika Boroa (ICASA)
- China (SRRC)
- Thailand (NBTC)
- India (WPC)
- Australia/ New Zealand (ACMA)
- Tlhatlhobo: 1.5-RAFT
- Letsatsi: La 28-Sept-2023
Likarolo tsa Bohlokoa:
- Lekunutu
- Sepheo: Li-beacon, Taolo ea Remoutu, Haufi tags, Li-Sensors tsa Matla a Tlase, Ho laela/Ho fana, phala ea RF, Lintho tsa ho bapala, Lisebelisoa tsa indasteri, Ho fumana lintlha, Wellness, Infotainment, IoT, Robotics, Lipapali
Lisebelisoa:
- Li-beacons
- Remote Controls
- Haufinyane tags
- Li-sensor tse tlase tsa matla
- Ho laela/ Ho fana
- RF phala
- Lintho tsa ho bapala
- Lisebelisoa tsa indasteri
- Ho fumana lintlha
- Bophelo bo botle
- Infotainment
- IoT
- Liroboto
- Papali
Litaelo tsa Tšebeliso ea Sehlahisoa
- Litšupiso
Karolo ea litšupiso e fana ka lintlha tse eketsehileng le lisebelisoa tse amanang le sehlahisoa. Ka kopo sheba karolo ena bakeng sa tataiso e eketsehileng. - Setšoantšo se Thibeloang
Setšoantšo sa li-block se bontša likarolo tsa ka hare le likamano tsa DA14535MOD. Sebelisa setšoantšo sena ho utloisisa sebopeho se akaretsang sa sehlahisoa. - Pinout
Setšoantšo sa pinout se bonts'a likabelo tsa phini le mesebetsi ea DA14535MOD. Sheba setšoantšo sena ha u kopanya lisebelisoa kapa likarolo tse ka ntle ho sehlahisoa. - Litaba tsa ho paka
Karolo ena e fana ka lintlha tse mabapi le ho paka sehlahiswa, ho kenyeletswa le tlhahisoleseding mabapi le sephuthelo sa theipi le reel, hammoho le ditaelo tsa ho ngola. Latela litataiso tsena ha u tšoara le ho boloka sehlahisoa. - Boitsebiso ba Kopo
Karolo ea tlhaiso-leseling ea kopo e na le litaelo le litataiso tsa bohlokoa tsa ho sebelisa sehlahisoa lits'ebetsong tse fapaneng. Sheba karolo ena bakeng sa litaelo tse khethehileng tsa tšebeliso le likhothaletso. - Soldering
Karolo ena e hlalosa litlhoko tsa soldering le likhothaletso bakeng sa DA14535MOD. Latela litataiso tsena ha u solder kapa u lokisa sehlahisoa ho netefatsa ts'ebetso e nepahetseng le ts'epahalo. - Ho Odara Boitsebiso
Karolo ea tlhahisoleseding ea ho laela e fana ka lintlha tsa mokhoa oa ho beha litaelo tsa DA14535MOD, ho kenyelletsa le linomoro tsa likarolo le bongata. Sebelisa lintlha tsena ha u odara kapa u kopa likarolo tse ling tsa sehlahisoa.
LBH:
Q: Ke litekanyetso life tsa ho lumellana ha DA14535MOD?
DA14535MOD e lumellana le litekanyetso tse latelang:
- Europe (CE/RED)
- UK (UKCA)
- US (FCC)
- Canada (IC)
- Japane (MIC)
- Korea Boroa (KCC)
- Taiwan (NCC)
- Brazil (Anatel)
- Afrika Boroa (ICASA)
- China (SRRC)
- Thailand (NBTC)
- India (WPC)
- Australia/ New Zealand (ACMA)
Q: likarolo tsa bohlokoa tsa DA14535MOD ke life?
Likarolo tsa bohlokoa tsa DA14535MOD li kenyelletsa:
- Lekunutu
- Ts'ehetso bakeng sa li-beacon, li-remote control, haufi tags, lisensara tse nang le matla a fokolang, ho laela/ho fana, phala ea RF, lintho tsa ho bapala, lisebelisoa tsa indasteri, ho fumana lintlha, bophelo bo botle, infotainment, IoT, robotics, le lipapali.
Likarolo tsa Bohlokoa
Ho Ikamahanya le Maemo
- Europe (CE/RED)
- UK (UKCA)
- US (FCC)
- Canada (IC)
- Japane (MIC)
- Korea Boroa (KCC)
- Taiwan (NCC)
- Brazil (Anatel)
- Afrika Boroa (ICASA)
- China (SRRC)
- Thailand (NBTC)
- India (WPC)
- Australia/ New Zealand (ACMA)
Lisebelisoa
- Li-beacons
- Remote Controls
- Haufinyane tags
- Li-sensor tse tlase tsa matla
- Ho laela/ Ho fana
- RF phala
- Lintho tsa ho bapala
- Lisebelisoa tsa indasteri
- Ho fumana lintlha
- Bophelo bo botle
- Infotainment
- IoT
- Liroboto
- Papali
Litšupiso
- Lethathamo la lintlha tsa DA14535
- DA14585/DA14531 SW Platform Reference Manual
Pinout
Hlokomela hore J1 ha e na khokahano ea kahare. J1 e lokela ho kopanngoa fatše.
Lethathamo la 1: Tlhaloso ea Pin
| Pin # | Pin Lebitso | Mofuta | Seta Naha bocha | Tlhaloso |
| J1 | NC | Ha e hokahane ka hare. E kgothaletswa ho hokahana le mobu ka ntle | ||
| J2 | GND | GND | Fatše | |
| J3 | GND | GND | Fatše | |
| J4 | GND | GND | Fatše | |
| J5 | P0_6 | DIO
(Mofuta oa A) Ntlha ea 1 |
Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
| J6 | GND | GND | Fatše | |
| J7 | VBAT | PWR | MATLA. Khokahano ea betri. Phepelo ea IO | |
| J8 | P0_11 | DIO | Ke-PD | INPUT/OUTPUT e nang le hula- |
| (Mofuta A) | bahanyetsi ba holimo/tlase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Sepheo se akaretsang sa I/O port bit kapa alternate function node. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha | |||
| J9 | P0_10 | DIO (Mofuta A) | Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
| SWDIO | LEBETSO/ SEPHEO. SWI Data input/output. Lintlha tse peli le puisano ea taolo (ka ho sa feleng) | |||
| J10 | P0_2 | DIO
(Mofuta oa B) |
Ke-PD | HO HLAHALA KA HO KHETHA ho na le lihanyetsi tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Sepheo se akaretsang sa I/O port bit kapa alternate function node. E na le mokhoa oa ho boloka boemo nakong ea ho theoha ha motlakase |
| SWCLK | INPUT SWI letšoao la oache (ka ho sa feleng) | |||
| J11 | GND | GND | Fatše | |
| J12 | P0_0 | DIO
(Mofuta oa B) Ntlha ea 2 |
Ke-PD | HO HLAHALA KA HO KHETHA ho na le lihanyetsi tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Sepheo se akaretsang sa I/O port bit kapa alternate function node. E na le mokhoa oa ho boloka boemo nakong ea ho theoha ha motlakase |
| RST | RST e sebetsang e ncha ea lisebelisoa tse phahameng (ea kamehla) | |||
| J13 | P0_7 | DIO
(Mofuta A) |
Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
| J14 | P0_5 | DIO
(Mofuta oa B) |
Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
| J15 | P0_9 | DIO
(Mofuta A) |
Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
| J16 | P0_8 | DIO
(Mofuta A) |
Ke-PD | HO HLAHALA KA HO KHETHA / OUTPUT e nang le lihanyetsi tse hloahloa tsa ho hula holimo/tlaase. Ho hulela fatše ho nolofalitsoe nakong le ka mor'a ho tsosolosa. Morero o akaretsang oa boema-kepe ba I/O kapa li-node tse ling tsa tšebetso. E na le mokhoa oa ho boloka boemo nakong ea ha motlakase o theoha |
Hlokomela 1
Ho na le mefuta e 'meli ea li-pads, e leng Mofuta oa A le oa Mofuta oa B. Mofuta oa A ke pad e tloaelehileng ea IO e nang le "Schmitt trigger" ho kenya letsoho ha Mofuta oa B o na le RC Filter e eketsehileng e nang le maqhubu a ho khaola a 100 kHz.
Hlokomela 2
Pini ena e boetse e sebelisetsoa puisano le SPI FLASH e ka hare.
- I-PD ke Input-Huluted Down
- I-PU ke Input-Hulled Up
- DIO ke Digital Input-Output
- PWR ke matla
- GND ke Motheo
Litšobotsi
- Meeli eohle ea MIN/MAX e tiisitsoe ke moralo, tlhahlobo ea tlhahiso, le/kapa sebopeho sa lipalo. Litekanyetso tse tloaelehileng li ipapisitse le liphetho tsa litlhaku maemong a litekanyo tsa kamehla, 'me li fana ka tsebo feela.
- Maemo a kamehla a ho lekanya (ntle le haeba ho boletsoe ka tsela e 'ngoe): VBAT= 3.0 V, TA = 25 oC. Litekanyo tsohle tsa seea-le-moea li etsoa ka lisebelisoa tse tloaelehileng tsa ho lekanya RF.
Feletseng Maximum Ratings
Matšoenyeho a fetang a thathamisitsoeng tlas'a Absolute Maximum Ratings a ka baka tšenyo e sa feleng ea sesebelisoa. Tsena ke litekanyetso tsa khatello ea kelello feela, kahoo ts'ebetso ea ts'ebetso ea sesebelisoa ho tsena kapa maemo leha e le afe a mang ho feta a bontšitsoeng likarolong tsa ts'ebetso ea litlhaloso ha a bolelloe. Ho pepesehela maemo a phahameng ka ho fetesisa a Kelo ka nako e telele ho ka ama ts'epahalo ea sesebelisoa.
Lethathamo la 2: Litekanyetso tse Felletseng ka ho Fetisisa
| Paramethara | Tlhaloso | Maemo | Min | Max | Yuniti |
| VBAT_LIM | Ho fokotsa phepelo ea betri voltage | -0.2 | 3.6 | V |
Maemo a Tšebetso a khothalelitsoeng
Tafole ea 3: Maemo a Khothaletso a Ts'ebetso
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
|
VBAT |
Phepelo ea betri voltage nolofalletsa ho etsa mananeo a FLASH |
1.65 |
3.6 |
V |
||
|
VBAT_NOM |
Phepelo ea betri ka lebitso la voltage |
3 |
V |
|||
| VPIN | Moqtage holim'a phini | -0.2 | 3.6 | V | ||
|
TA |
Mocheso o sebetsang oa tikoloho |
-40 |
25 |
85 |
°C |
Litšobotsi tsa Sesebelisoa
Lethathamo la 4: DC Litšobotsi
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
|
IBAT_ACTIVE |
Phepelo ea betri hajoale e nang le CPU e sebelisang CoreMark ho tsoa ho RAM ho 16 MHz |
tbd |
mA |
|||
|
IBAT_BLE_ADV_ 100ms |
Kakaretso ea phepelo ea betri ka sistimi e maemong a Lipapatso (liteishene tse 3) ka mor'a 100 ms le ho robala nako e telele 'me RAM eohle e bolokiloe. Matla a tsoang ho TX ho 3dBm. FLASH e timme. |
tbd |
μA |
|||
|
IBAT_BLE_CON |
Karolelano ea phepelo ea betri ea hajoale e nang le sistimi ka | tbd | μA |
|
N_30ms |
boemo ba khokahano ka nako ea khokahano ea 30ms le ho robala nako e telele 'me RAM eohle e bolokiloe. Matla a tsoang ho TX ho 3dBm. FLASH e timme. | |||||
|
IBAT_FLASH |
Phepelo ea betri ea hajoale ka khouto e latang CPU ho tsoa ho serial FLASH. RF e timme. |
tbd |
mA |
|||
|
IBAT_HIBERN |
Phepelo ea betri ea hajoale ha sistimi e koetsoe (Hibernation kapa mokhoa oa ho tsamaisa). FLASH e timme. |
tbd |
μA |
|||
|
IBAT_IDLE |
Betri e fumaneha hona joale ka CPU ho Emela Boemo ba Khatiso. FLASH e timme. |
tbd |
mA |
|||
|
IBAT_SLP_32KB |
Phepelo ea betri ea hajoale e nang le sistimi e maemong a malelele a ho robala 'me 32 kB RAM e bolokiloe |
tbd |
μA |
|||
|
IBAT_SLP_64KB |
Battery e fana ka sesebelisoa sa nako e telele 'me RAM eohle e bolokiloe |
tbd |
μA |
|||
|
IBAT_RF_RX |
Phepelo ea betri ea hajoale |
RX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; |
tbd |
mA |
||
|
IBAT_RF_TX_+3 dBm |
Phepelo ea betri ea hajoale |
TX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; Matla a tsoang ho 3 dBm; |
tbd |
mA |
||
|
IBAT_RF_TX_0d Bm |
Phepelo ea betri ea hajoale |
TX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; Matla a tsoang ho 0 dBm; |
tbd |
mA |
||
|
IBAT_RF_TX_- EA-3dBm |
Phepelo ea betri ea hajoale |
TX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; Matla a tsoang ho -3 dBm; |
tbd |
mA |
||
|
IBAT_RF_TX_- EA-7dBm |
Phepelo ea betri ea hajoale |
TX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; Matla a tsoang ho -7 dBm |
tbd |
mA |
||
|
IBAT_RF_TX_- EA-19dBm |
Phepelo ea betri ea hajoale |
TX e tsoelang pele; FLASH ka mokhoa oa ho robala; DCDC converter e butswe; Matla a tsoang ho -19.5 dBm |
tbd |
mA |
Lethathamo la 5: XTAL32M - Maemo a Ts'ebetso a khothalelitsoeng
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
| fXTAL(32M) | Leqhubu la Crystal oscillator | 32 | MHz | |||
|
ΔfXTAL(32M) |
Mamello ea maqhubu a Crystal |
Ka mor'a ho khaola ka boikhethelo; ho kenyelletsa botsofali le ho hoholeha ha mocheso
Hlokomela 1 |
-20 |
20 |
ppm |
Tlhokomeliso 1 Ho sebelisa li-varicaps tse ka hare mefuta e mengata ea likristale e ka fokotsoa ho ea ho mamello e hlokahalang.
Lethathamo la 6: Digital I/O - Maemo a khothaletsoang a Ts'ebetso
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
|
VIH |
Phaello ea boemo bo phahamengtage |
VDD=0.9V |
0.7*V DD |
V |
||
|
VIL |
TLHOKOMELISO ea boemo bo tlase voltage |
VDD=0.9V |
0.3*V DD |
V |
Lethathamo la 7: Digital I/O - Litšobotsi tsa DC
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
| IIH | Boemo bo phahameng ba hona joale | VI=VBAT_HIGH=3.0V | -10 | 10 | μA | |
| IIL | Boemo bo tlase ba hona joale | VI=VSS=0V | -10 | 10 | μA | |
| IIH_PD | Boemo bo phahameng ba hona joale | VI=VBAT_HIGH=3.0V | 60 | 180 | μA | |
| IIL_PU | Boemo bo tlase ba hona joale | VI=VSS=0V, VBAT_HIGH=3.0V | -180 | -60 | μA | |
|
VOH |
Phaello e phahameng ea boemo bo phahamengtage |
IO=3.5mA, VBAT_HIGH=1.7V |
0.8*VB AT_HI GH |
V |
||
|
TLHOKOMELO |
Phaello e tlase ea boemo bo tlasetage |
IO=3.5mA, VBAT_HIGH=1.7V |
0.2*VB AT_HI GH |
V |
||
|
VOH_LOWDRV |
Phaello e phahameng ea boemo bo phahamengtage |
IO=0.3mA, VBAT_HIGH=1.7V |
0.8*VB AT_HI GH |
V |
||
|
VOL_LOWDRV |
Phaello e tlase ea boemo bo tlasetage |
IO=0.3mA, VBAT_HIGH=1.7V |
0.2*VB AT_HI GH |
V |
Lethathamo la 8: Radio - Litšobotsi tsa AC
| Paramethara | Tlhaloso | Maemo | Min | Tlanya | Max | Yuniti |
| PSENS_CLEAN | boemo ba kutlo | Dirty Transmitter e holofetse; | tbd | dBm |
| DC-DC converter e holofetse; PER = 30.8%;
Hlokomela 1 |
||||||
|
PSENS_EPKT |
boemo ba kutlo |
Boholo ba pakete e atolositsoeng (255 octets) |
tbd |
dBm |
Ela hloko 1 E lekantswe ho ya ka Bluetooth® Low Energy Test Specification RF-PHY.TS/4.0.1, karolo 6.4.1.
Litlhaloso tsa Mechini
Litekanyo
Litekanyo tsa module li bontšitsoe setšoantšong sa 3.
PCB Footprint
Palo ea maoto ea PCB e bonts'itsoe ho Setšoantšo sa 4.
Ho tshwaya
Litaba tsa ho paka
Theipi le Reel
Litlhaloso tsa 'nete tsa reel li hlahisoa tafoleng e latelang:
Lethathamo la 9: Litlhaloso tsa Reel
| Diameter | 13 inch |
| Reel tape bophara | 24 limilimithara |
| Theipi ea thepa | Antistatic |
| Qty/Reel | Li-pc tsa 100 / 1000 |
| Moetapele | 400 mm + 10% |
| K'haravene | 160 mm + 10% |
Ho ngola
Leibole ea litaelo e bonts'a tlhahisoleseling mabapi le tumellano ea litaelo joalo ka setšoantšong sa 8.
Boitsebiso ba Kopo
Ho na le lintlha tse ikhethileng mabapi le tšebeliso ea mojule oa TINYTM, e leng:
- Letšoao la RST le arolelanoa le kenyelletso ea MOSI ea NOR flash. Ka lebaka lena, RST ha ea lokela ho isoa GND. Ha Flash e ka hare e sebelisoa, ts'ebetso ea ho seta bocha ha e fumanehe
- SPI Bus ea DA14535 e sebelisetsoa puisano ea SoC le NOR Flash ka nako ea boot. Lipontšo tse tharo ho tse 'nè ha li khannoe ho li-module tsa kantle. Ka lebaka lena, sensor e sebelisang bese ea SPI e tlameha ho abeloa (ka software) ho li-module pins ho buisana le eona kamora hore boot e phetheloe le ha NOR Flash e se e sa sebelisoe. Exampe fanoe ho Setšoantšo sa 12.
Hlokomela hore P0_0/RST pin (J12) ha ea lokela ho khannoa ha module ea TINYTM e qala ho tsoa ho SPI FLASH ea eona e ka hare.
Litataiso tsa Moralo
- DA14535 SmartBond TINY™ Module e tla le antenna e kopaneng ea PCB. Sebaka sa antenna ke 12 × 4 mm. Moqtage Standing Wave Ratio (VSWR) le katleho e itšetlehile ka sebaka sa ho kenya.
- Ts'ebetso ea radiation ea antenna ea trace ea PCB e ipapisitse le sebopeho sa PCB se amohelang. Phaello e phahameng ka ho fetisisa ea li-antenna ke -0.5 dBi ha e kenngoa ka lebokoseng la litšupiso tsa 50 × 50 mm, joalokaha ho bontšoa ho Setšoantšo sa 21. Mokhoa oa mahlaseli ke oa omnidirectional.
- Karolo e ka pele ea RF e ntlafalitsoe ho fihlela katleho e phahameng ka ho fetesisa bakeng sa maemo a fapaneng a ho kenya module ho PCB e amohelang. Ho fumana ts'ebetso e ts'oanang, latela litataiso tse hlalositsoeng likarolong tse latelang.
Tlhophiso Sebaka
- Bakeng sa ts'ebetso e nepahetseng, kenya mojule pheletsong ea PCB e amohelang molaetsa o shebileng ka ntle. Mojule o ka fumaneha ho e 'ngoe ea likhutlo tse kantle kapa bohareng ba PCB e amohelang ka ts'ebetso e ts'oanang.
- Lenaka le lokela ho ba le sebaka sa mahala sa 4 mm ka nqa tsohle. Koporo kapa laminate e haufi le PCB trace antenna e tla ama katleho ea lenakana. Laminate kapa koporo tlas'a antenna e lokela ho qojoa kaha e ama haholo ts'ebetso ea antenna. Sebaka sa ho boloka li-antenna se ka bonoa ho Setšoantšo sa 11.
- Litšepe tse haufi le lenakana li tla theola tšebetso ea lona. Palo ea ho senyeha e itšetlehile ka litšobotsi tsa tsamaiso ea moamoheli.
- Letlapa la 10 le akaretsa katleho ea antenna libakeng tse fapaneng tsa ho kenya ho PCB e amohelang joalo ka ha ho bonts'itsoe ho Setšoantšo sa 10.
Lethathamo la 10: Katleho ea Antenna vs Maemo a Mojule oa TINYTM
| Boemo # 1 (Ka ho le letšehali) | Boemo #2 (Bohareng) | Boemo #3 (ka ho le letona) | ||||
| Freq | Katleho ea li-antenna | Katleho ea li-antenna | Katleho ea li-antenna | |||
| [MHz] | [%] | [dB] | [%] | [dB] | [%] | [dB] |
| 2405 | 52 | -2,8 | 40 | -4,0 | 40 | -4,0 |
| 2440 | 46 | -3,4 | 34 | -4,7 | 41 | -3,9 |
| 2480 | 50 | -3,0 | 40 | -4,0 | 52 | -2,8 |
Sebopeho sa 'nete sa boto ea tlhahlobo ea module ea TINYTM e sebelisitsoeng ho etsa litekanyo e bonts'itsoe ho Setšoantšo sa 12.
Litšoantšo tsa Antenna
Litekanyo tsa antenna VSWR bakeng sa maemo a mararo a ho kenya li bonts'itsoe lipalong tse latelang.
Radiation Pattern
Litekanyo tsa mohlala oa mahlaseli a antenna li etsoa ka kamoreng ea anechoic. Mekhoa ea mahlaseli e hlahisoa bakeng sa lifofane tse tharo tsa tekanyo: lifofane tsa XY-, XZ-, le YZ- tse nang le polarization e otlolohileng le e otlolohileng ea antenna e amohelang.
Litekanyo li etsoa bakeng sa mojule o kentsoeng k'honeng e kaholimo ho le letona la boto ea litšupiso ntle le laminate ka tlase ho mohlala oa antenna.
Soldering
- Thekiso e atlehileng ea reflow soldering ea DA14535 TINY TM Module ho PCB e ipapisitse le liparamente tse 'maloa tse joalo ka botenya ba stensele, lesoba la paste la li-pads solder, litšobotsi tsa solder paste, reflow soldering pro.file, boholo ba PCB, joalo-joalo.
- Bophahamo ba peista ea solder e sebelisoang ho boto e khethoa haholo ke boholo ba lesoba le botenya ba stencil. Sebaka sa pele sa peista sa solder bakeng sa li-pads se fanoe holim'a lera la solder peista ea PCB footprint. Sebaka sena se fetotsoe ke litsebi tsa ts'ebetso ea kopano ho latela botenya ba stencil, pente ea solder, le lisebelisoa tse teng tsa kopano.
- The solder profile ho itšetlehile ka mofuta oa peista ea solder e sebelisitsoeng. Bakeng sa mohlalaample, solder profile ea pente ea solder e se nang lead, Sn3Ag0.5Cu e se nang Flux e hloekileng (ROL0) le Solder Powder Type 4, e hlahisoa ka tlase.
- Ha ho na flux e hloekileng e khothalletsoang hobane ho hlatsoa ha hoa lokela ho sebelisoa ka mor'a kopano ho qoba mongobo o kenngoa tlas'a thebe.
Lethathamo la 11: Reflow Profile Tlhaloso
| Lebitso la Palo | Moedi o Tlase | Moedi o Phahameng | Diyuniti |
| Slope1 (Target=2.0) Pakeng tsa 30.0 le 70.0 | 1 | 3 | Likhato/ tsa Bobeli |
| Slope2 (Target=2.0) Pakeng tsa 70.0 le 150.0 | 1 | 3 | Likhato/ tsa Bobeli |
| Slope3 (Target=-2.8) Pakeng tsa 220.0 le 150.0 | -5 | -0.5 | Likhato/ tsa Bobeli |
| Preheat nako 110-190°C | 60 | 120 | Metsotsoana |
| Nako e kaholimo ho phallo ea metsi @220°C | 30 | 65 | Metsotsoana |
| Mocheso o phahameng | 235 | 250 | Likhato tsa Celsius |
| Kakaretso ea nako ka holimo ho @235°C | 10 | 30 | Ea bobeli |
Ho ile ha etsoa tlhahlobo ea solderability reflow ea lipotoloho tse hlano, ho sebelisoa mekhoa e boletsoeng ho standard ea JESD-A113E. MSL ke sesupo sa nako e phahameng e lumelletsoeng (bophelo ba mokatong) moo sesebelisoa sa polasetiki se sa utloeng mongobo, hang ha se tlositsoe mokotleng o omileng, se ka pepesetsoang tikolohong e nang le mocheso o phahameng oa 30 ° C le mongobo o phahameng o lekanyelitsoeng. ea 60 % RH pele ho ts'ebetso ea solder reflow.
- DA14535 TINY Module e tšoaneleha bakeng sa MSL 3.
Lethathamo la 12: Boemo ba MSL vs Floor Lifetime
| Boemo ba MSL | Mokatong Bophelo Bohle |
| Setšoantšo sa MSL4 | Lihora tse 72 |
| Setšoantšo sa MSL3 | Lihora tse 168 |
| MSL 2A | Libeke tse 4 |
| Setšoantšo sa MSL2 | 1 selemo |
| Setšoantšo sa MSL1 | E se nang moeli ho 30 °C/85 %RH |
Ho Odara Boitsebiso
Nomoro ea ho hlophisa e na le nomoro ea karolo e lateloang ke sehlongoana se bontšang mokhoa oa ho paka. Ho fumana lintlha le ho fumaneha, ikopanye le moemeli oa hau oa thekiso ea lehae oa Renesas.
Lethathamo la 13: Litaba tsa ho Odara (Samphanyane)
| Nomoro ea Karolo | Boholo (mm) | Foromo ea ho Romela | Pack Quantity | MOQ |
| DA14535MOD- 00F0100C | 12.5
x 14.5 x 2.8 |
Reel | 100 | 3 |
Lethathamo la 14: Litaba tsa ho Odara (Tlhahiso)
| Nomoro ea Karolo | Boholo (mm) | Foromo ea ho Romela | Pack Quantity | MOQ |
| DA14535MOD- 00F01002 | 12.5 x
14.5 x 2.8 |
Reel | 1000 | 1 |
Boitsebiso ba Taolo
Karolo ena e fana ka lintlha tsa taolo bakeng sa DA14535 SmartBond TINYTM Module. Mojule ona o netefalitsoe bakeng sa 'maraka oa lefats'e. Sena se nolofalletsa ho kena 'marakeng oa sehlahisoa sa ho qetela. Hlokomela hore sehlahisoa sa ho qetela se tla hloka ho etsa kopo ea setifikeiti sa sehlahisoa sa ho qetela, leha ho le joalo, setifikeiti sa module se thathamisitsoeng ka tlase se tla thusa ts'ebetso eo.
Ha mosebelisi a romella sehlahisoa ho limmaraka tseo, sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana e ikhethileng ea mmaraka. Bakeng sa mohlalaample, limmaraka tse ling li na le liteko tse eketsehileng le/kapa netefatso joalo ka Korea EMC, Afrika Boroa SABS EMC 'me ba bang ba na le tlhoko ea ho beha letšoao la tumello ea modular ID kapa letšoao le nang le ID e amohetsoeng ea Bluetooth® Low Energy modular ID ho moamoheli. tšoaea ka kotloloho, joalo ka Japane, Taiwan, Brazil.
Lethathamo la Maemo a Conformance ao DA14535 SmartBond TINYTM Module e kopanang le ona le bontshitswe ho Lethathamo la 15.
Lethathamo la 15: Tumellano ea Maemo
| Sebaka | Ntho | Tshebeletso | Standard | Setifikeiti sa ID |
|
Lefatšeng ka bophara |
Polokeho bakeng sa module |
CB |
IEC 62368-1:2018 |
TS'ELISO NTS'ELI
Hlokomela 1 |
|
Europe |
Wireless |
KHIBIDUDU |
EN 300 328 v2.2.2
EN 62479:2010 |
TS'ELISO NTS'ELI |
| Polokeho bakeng sa module | CE | EN IEC 62368-1:
2020+A11: 2020 |
||
|
EMC |
KHIBIDUDU |
EN 301 489-1 v2.2.3
EN 301 489-17 v3.2.4 |
||
|
UK |
Wireless |
UKCA-RED |
EN 300 328 v2.2.2
EN 62479:2010 |
TS'ELISO NTS'ELI |
| Polokeho bakeng sa module | UKCA-LVD | BS EN IEC 62368- 1: 2020+A11: 2020 | ||
|
EMC |
UKCA-RED |
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4 |
||
|
US/CA |
Wireless |
FCC ID |
47 CFR KAROLO EA 15
Karolo e ka tlase ea C: 2021 Karolo ea 15.247 |
Y82-DA14535MOD |
|
IC ID |
Tlhaloso ea 247 ea RSS-2
Hlakola 2017 RSS-Gen Phatlalatso 5: Mmesa 2018+A1: Hlakubele 2019+A2: Hlakola 2021 |
9576A-DA14535MOD |
||
| Japane | Wireless | MIC | JRL | 012-230026 |
| Taiwan | Wireless | NCC | LP0002 | TS'ELISO NTS'ELI |
|
Korea Boroa |
Wireless |
MSIP |
방송통신표준
KS X 3123 “무선 설비 적합성 평가 시험 방법” KN 301 |
RR-8DL-DA14535MOD |
| Afrika Boroa | Wireless | ICASA | E ipapisitse le RED | TS'ELISO NTS'ELI |
|
Brazil |
Wireless |
Anatel |
ATO No.14448/2017
Qeto No.680 |
TS'ELISO NTS'ELI |
| China | Wireless | SRRC | 信部无【2002】353 | TS'ELISO NTS'ELI |
| Thailand | Wireless | NBTC | NBTC TS 1035-
2562 |
TS'ELISO NTS'ELI |
| India | Wireless | WPC | E ipapisitse le RED | TS'ELISO NTS'ELI |
| Australia / New Zealand | Wireless | ACMA | E ipapisitse le RED | TS'ELISO NTS'ELI |
Hlokomela 1
Kenyelletsa liphapang tsa naha tsa US/Canada/Japan/China/Korea/Europe/Australia/South Africa/Taiwan/Brazil/Thailand.
CE (Radio Equipment Directive 2014/53/EU (RED)) – (Europe)
DA14535 SmartBond TINYTM Module ke seea-le-moea se hlahlobiloeng sa Radio Equipment Directive (RED) se tšoailoeng CE. Mojule o entsoe le ho lekoa ka sepheo sa ho ba karoloana ea sehlahisoa sa ho qetela. Mojule ona o lekoa ho RED 2014/53/EU Litlhoko tsa Bohlokoa tsa Bophelo bo Botle, Polokeho, le Radio. Litekanyetso tse sebetsang ke:
- Radio: EN 300 328 V2.2.2 (2019-07)
- Bophelo bo botle: (SAR) EN 62479:2010
- Tšireletseho: EN 62368-1
- EMC: EN 301 489-1 v2.2.3, EN 301 489-17 v3.2.4
Sehlahisoa sa ho qetela se tla hloka ho etsa liteko tsa EMC tsa seea-le-moea ho latela EN 301 489. Liteko tse entsoeng li ka ruuoa ho tsoa tlalehong ea tlhahlobo ea mojule. Ho khothalletsoa ho pheta tlhahlobo ea mahlaseli a EN 300 328 ka kopano ea sehlahisoa sa ho qetela.
FCC - (USA)
Nomoro ea mohlala. DA14535MOD-00F0100
FCC ID: Y82-DA14535MOD
Lethathamo la Melao e sebetsang ea FCC
Mojule o lumellana le FCC Karolo ea 15.247.
Akaretsa Maemo a Khethehileng a Tšebeliso ea Ts'ebetso
Mojule ona o netefalitsoe bakeng sa lits'ebetso tse Portable. Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.
Mekhoa e Lekanyelitsoeng ea Module
- Ha e sebetse.
Latela Meetso ea Antenna
- Ha e sebetse.
Mehopolo ea RF Exposure
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a mahlaseli a kotsi a FCC ea RF e behiloeng bakeng sa tikoloho e sa laoleheng. Lenakana(li)sebelisoa tse sebelisoang bakeng sa transmitter ena ha ea lokela ho kopanngoa kapa ho sebetsa mmoho le lenakana lefe kapa lefe kapa transmitter.
Liantenna
| Mofuta | Fumana | Tšitiso | Kopo |
| Antenna ea PCB | -0.5 dBi | 50Ω | E tsitsitse |
Lenakana le khomaretsoe ruri, ha le khone ho nkeloa sebaka.
Leibole le Boitsebiso ba Boikamahanyo
Sesebelisoa sena se lumellana le karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
Ela hloko 2 Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
| Hlokomela |
| Moetsi ha a ikarabelle bakeng sa tšitiso leha e le efe ea seea-le-moea kapa TV e bakoang ke liphetoho tse sa lumelloeng kapa liphetoho ho thepa ena. Liphetoho tse joalo kapa liphetoho li ka etsa hore mosebedisi a se ke a khona ho sebelisa thepa eo. |
| Tlhokomediso |
| Liphetoho kapa liphetoho yuniti ena e sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tsamaiso e ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa. |
| Hlokomela |
| Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa tšebeliso 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:
● Shebisa sebaka kapa u suthise lenakana le amohelang sebakeng se seng. ● Eketsa karohano pakeng tsa thepa le moamoheli. ● Hokela thepa lepocheng la potoloho e fapaneng le eo moamoheli a hoketsoeng ho eona. ● Ikopanye le morekisi kapa setsebi se nang le phihlelo sa seea-le-moea/TV bakeng sa thuso. |
Mohokahanyi oa sistimi o tlameha ho beha lengolo la kantle ka ntle ho ntlo ea sehlahisoa sa ho qetela ea DA14535MOD-00F0100 Module. Ka tlase ke likahare tse tlamehang ho kenyelletsoa leiboleng ena.
Litlhoko tsa ho ngola li-OEM:
| Hlokomela |
| OEM e tlameha ho etsa bonnete ba hore litlhoko tsa ho ngolisoa tsa FCC lia fihlelleha. Sena se kenyelletsa leibole ea kantle e bonahalang hantle ka ntle ho ntlo ea sehlahisoa sa ho qetela e bonts'ang litaba tse bontšitsoeng ka tlase: |
- Mohlala: DA14535MOD-00F0100
- E na le FCC ID: Y82-DA14535MOD
Lintlha tse mabapi le mekhoa ea liteko le litlhoko tse ling tsa tlhahlobo:
Ha u lekola sehlahisoa se amohelang, moetsi oa moamoheli o lokela ho latela Phatlalatso ea FCC KDB 996369 D04 Module Integration Guide bakeng sa ho lekola lihlahisoa tse amohelang. Moetsi oa moamoheli a ka sebelisa sehlahisoa sa bona nakong ea litekanyo. Ha ho etsoa litlhophiso, haeba likhetho tsa ho kopanya le ho letsetsa lebokose bakeng sa tlhahlobo li sa sebetse, moetsi oa lihlahisoa o lokela ho hokahanya le moetsi oa module bakeng sa ho fumana software ea mokhoa oa teko.
Teko e eketsehileng, Karolo ea 15 Karolo ea B ea boitlhompho:
Modular transmitter ke FCC e lumelletsoeng feela bakeng sa lenane la likarolo tse itseng tsa molao (FCC Karolo ea 15.247) lethathamong la thuso, le hore moetsi oa sehlahisoa o ikarabella bakeng sa ho latela melao efe kapa efe e meng ea FCC e sebetsang ho moamoheli e sa kenngoeng ke tumello ea modular transmitter ea. setifikeiti. Sehlahisoa sa ho qetela sa moamoheli se ntse se hloka tlhahlobo ea tumellano ea Karolo ea 15 Karolo e ka tlase ea B e nang le transmitter ea modular e kentsoeng ha e na le potoloho ea dijithale.
IC (Canada)
- Nomoro ea mohlala. DA14535MOD-00F0100
- IC ID: 9576A-DA14535MOD
DA14535 SmartBond TINYTM Module e netefalitsoe bakeng sa IC e le transmitter e nang le modula o le mong. Mojule o kopana le tumello ea modular ea IC le litlhoko tsa ho ngola. IC e latela liteko le melao e tšoanang le ea FCC mabapi le li-module tse netefalitsoeng ka thepa e lumelletsoeng.
Mojule o lekoa ho latela maemo a latelang:
- Radio: RSS-247 Khatiso ea 2: Hlakola 2017, RSS-Gen Khatiso ea 5: Mmesa 2018+A1: Hlakubele 2019+A2: Hlakola 2021
- Bophelo bo botle: RSS-102 Khatiso ea 5:2015
Sesebelisoa sena se na le li-transmitter/baamoheli ba sa lumelloeng ke laesense ba tsamaellanang le Li-RSS tse sa lumelloeng ke Boqapi, Saense le Ntlafatso ea Moruo Canada. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se kanna sa se ke sa baka tšitiso.
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
RF Exposure Statement
Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a IC e behiloeng bakeng sa tikoloho e sa laoleheng 'me se kopana le RSS-102 ea melao ea IC radio frequency (RF) Exposure. Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.
Boikarabello ba OEM ba ho latela Melao ea IC
Mohokahanyi oa OEM o ikarabella ho lekola sehlahisoa sa bona sa ho qetela bakeng sa litlhoko life kapa life tse ling tse hlokahalang bakeng sa ho kenya module joalo ka IC ES003 (EMC). Sena se ka kopanngoa le teko ea FCC Part 15B.
Qetella ho ngola lihlahisoa
DA14535 SmartBond TINYTM Module e ngotsoe ka IC ID ea eona: 9576A-DA14535MOD. Haeba ID ea IC e sa bonahale ha module e kenngoa ka har'a sesebelisoa se seng, joale sehlahisoa sa moamoheli se tlameha ho ngoloa ho bonts'a nomoro ea setifikeiti sa ISED bakeng sa module, e etelletsoeng pele ke lentsoe "e na le" kapa mantsoe a tšoanang a hlalosang moelelo o tšoanang, ka tsela e latelang. : E na le IC: 9576A-DA14535MOD.”
UKCA (UK)
UKCA ID: TLHOKOMELISO E EMETSE
Mojule o lekoa mme o fumanoe o lumellana le litekanyetso tse lumellanang le melaoana e thathamisitsoeng ka tlase ho latela UKCA-Radio Equipment Regulations 2017-CHAPTER 1 6 (1) (a) Health, 6 (1) (b) & 6 (2) .
Litekanyetso tse sebetsang ke:
- Radio: EN 300 328 V2.2.2 (2019-07)
- Bophelo bo botle: (SAR) EN 62479:2010
- Tšireletseho: EN 62368-1: 2018, BS EN IEC 62368-1: 2020+A11: 2020
- EMC: EN 301 489-1 v2.2.3, EN 301 489-17 v3.2.4
Sehlahisoa sa ho qetela se tla hloka ho etsa liteko tsa EMC tsa seea-le-moea ho latela EN 301 489. Liteko tse entsoeng li ka fuoa tlaleho ea tlhahlobo ea module. Ho khothalletsoa ho pheta tlhahlobo ea mahlaseli a EN 300 328 ka kopano ea sehlahisoa sa ho qetela.
NCC (Taiwan)
NCC ID: CERTIFICATION E LEBILE
DA14535 SmartBond TINYTM Module e fumane tumello ya ho obamelwa ho ya ka Molao wa Mehala. Mojule o lekoa ho latela maemo a latelang:
- Radio: Melao ea Tekheniki ea Lisebelisoa tsa Maqhubu a Matla a Tlase (LP0002)
Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
Qetella ho ngola lihlahisoa
ID ea NCC e ka sebelisoa ka kotloloho ho leibole ea sehlahisoa sa ho qetela.
MSIP (Korea Boroa)
- Nomoro ea mohlala. DA14535MOD-00F0100
- ID ea MSIP: RR-8DL-DA14535MOD
DA14535 SmartBond TINYTM Module e fumane setifikeiti sa tumellano ho latela Radio Waves Act. Mojule o lekoa ho latela maemo a latelang:
- Radio: Lekala la Mahlale le Tsebiso ea ICT No. 2019-105
Bakeng sa tlhahlobo ea waelese ea sehlahisoa sa ho qetela, o ka sheba tlaleho ea setifikeiti sa Renesas e le hore lab e tsebe hore module ka boeona e fetile leha e ntse e hloka ho hlahlojoa.
- Ho phaella moo, EMC bakeng sa waelese (KN301489).
Qetella ho ngola lihlahisoa
ID ea MSIP e ka sebelisoa ka kotloloho ho leibole ea sehlahisoa sa ho qetela. ID e lokela ho bonahala ka ho hlaka sehlahisoa sa ho qetela. Mohokahanyi oa mojule o lokela ho bua ka litlhoko tsa ho ngola bakeng sa Korea tse fumanehang ho Korea Communications Commission (KCC) websebaka.
ICASA (Afrika Boroa)
Setifikeiti sa Afrika Boroa se ipapisitse le tumello ea RED(CE).
Ho fanoe ka tumello ea ho hatisa lileibole tsa lihlahisoa joalo ka ha ho hlalositsoe ka tlase:
- Bakeng sa ho sebelisoa e le Leibole ka boholo ba sehlahisoa: 80 mm (W) X 40 mm (H). E tla hatisoa sehlahisoa.
- Bakeng sa ho sebelisoa e le Leibole ka boholo ba sephutheloana: 80 mm (W) X 40 mm (H). E tla hatisoa sephutheloana.
Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
ANATEL (Brazil)
- Nomoro ea mohlala. DA14535MOD-00F0100
- ID ea ANATEL: TIISETSO TEBELLO
Mojule o lekoa mme o fumanoe o lumellana le maemo a latelang a Sehlopha sa II:
- ATO (Molao) No 14448/2017
Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
“Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Phetolelo ea mongolo:
"Sesebelisoa sena ha se na tokelo ea tšireletso khahlano le tšitiso e kotsi 'me ha ea lokela ho baka tšitiso lits'ebetsong tse lumelletsoeng ka nepo."
SRRC (Chaena)
Nomoro ea mohlala. DA14535MOD-00F0100
- ID ea CMIIT: TIISETSO TEBELLO
Mojule o lekoa mme o fumanoe o lumellana le maemo a latelang:
Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
MIC (Japan)
- Nomoro ea mohlala. DA14535MOD-00F0100
- MIC ID: 012-230026
DA14535 SmartBond TINYTM Module e amohetse setifikeiti sa mofuta kamoo ho hlokahalang hore se lumellane le litekanyetso tsa tekheniki tse laoloang ke Lekala la Litaba tsa ka Hare le Likhokahano (MIC) la Japane ho latela Molao oa Radio oa Japane.
Mojule o lekoa ho latela maemo a latelang:
- Radio: JRL "Article 49-20 le lihlooho tse amehang tsa Ordinance Regulating Radio" Equipment End sehlahisoa se ka 'na sa hloka ho latela litlhoko tse eketsehileng ho latela molao oa EMC.
Qetella ho ngola lihlahisoa
MIC ID e ka sebelisoa ka kotloloho ho leibole ea sehlahisoa sa ho qetela. Sehlahisoa sa ho qetela se ka ba le letšoao la GITEKI le nomoro ea setifikeiti e le hore ho hlake hore sehlahisoa sa ho qetela se na le mojule oa seea-le-moea o tiisitsoeng. Lintlha tse latelang li ka bonts'oa haufi le, ka tlase, kapa ka holimo ho letšoao la GITEKI le nomoro ea setifikeiti ho bontša boteng ba mojule oa seea-le-moea o tiisitsoeng:
SmartBond TINY Bluetooth® LE Mojule
Phetolelo ea mongolo:
"Thepa ena e na le lisebelisoa tsa seea-le-moea tse boletsoeng tse netefalitsoeng ho Technical Regulation Conformity Certification tlasa Molao oa Radio."
NBTC (Thailand)
- Nomoro ea mohlala. DA14535MOD-00F0100
- NBTC SDoC ID: TIISETSO TEBELLO
- DA14535 SmartBond TINYTM Module e lumellana le litlhoko tsa NBTC naheng ea Thailand.
- Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
Qetella ho ngola lihlahisoa
Lihlahisoa tsa ho qetela li tla ba le ID ea tsona le litlhoko tsa ho ngola.
WPC (India)
- Nomoro ea mohlala. DA14535MOD-00F0100
- Nomoro ea Boingoliso: TIISETSO TEBELLO
- Setifikeiti sa India se ipapisitse le tumello/litlaleho tsa RED(CE). Ha ho litlhoko tsa ho tšoaea/ho ngola.
- Sehlahisoa sa ho qetela se kanna sa hloka ho latela litlhoko tse ling ho latela melaoana ea EMC.
Australia / New Zealand
- Nomoro ea mohlala. DA14535MOD-00F0100
- Nomoro ea Boingoliso: TIISETSO TEBELLO
Nalane ea Phetoho
| Khatiso | Letsatsi | Tlhaloso |
| 1.0 | 22-Phup-2023 | Tokollo ea pele. |
| 1.1 | 09-Ag-2023 | Likarolo tsa Bohlokoa tse ntlafalitsoeng tse nang le matla a phahameng a tlhahiso. |
| 1.2 | La 09-Sept-2023 | E ntlafalitsoe ka litaba tsa taolo |
| 1.3 | La 22-Sept-2023 | Lintlha tse ntlafalitsoeng tsa taolo |
| 1.4 | La 26-Sept-2023 | Lintlha tse ntlafalitsoeng tsa taolo |
| 1.5 | La 28-Sept-2023 | Letšoao le ntlafalitsoeng ka FCC, IC ID |
Litlhaloso tsa Boemo
Ho latela RoHS
Bafani ba Renesas Electronic ba tiisa hore lihlahisoa tsa eona li lumellana le litlhoko tsa Directive 2011/65/EU ea Paramente ea Europe mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi thepa ea motlakase le ea elektroniki. Lisetifikeiti tsa RoHS tse tsoang ho barekisi ba rona li fumaneha ha u li kopa.
Tsebiso ea Bohlokoa le Boithorollo
RENESAS ELECTRONICS CORPORATION LE BATHO BA HONA (“REENESAS”) E FANA KA LITŠOANTŠISO TSA MOSEBETSI LE TŠEBELETSO EA TŠEPAHALA (HO KENYA LE DATASHEETS), MESEBETSI EA HO HLAHALA (E KAKARELETSA MERARO EA TŠEBELETSO), KOPO KAPA MOSEBETSI O MONG, WEB LITHULUSO, LITEBISO TSA TŠEBELETSO, LE MESEBETSI E MONG “JOALOKAHA E LE” LE KA MPHOSO TSOHLE, LE E IKONELA LITIISETSO TSOHLE, TSE BOLELANG KAPA TSE BOLELANG, HO kenyeletsoa, ntle le MOEDI, LITIISETSO TSE FELENG TSA KHOETSO, HO TŠOANYEHA HO SEBELISA BOITSEBISO BA BORARO LITŠOANTŠISO LETLOTLO.
Lisebelisoa tsena li etselitsoe bahlahisi ba nang le tsebo ea ho rala ka lihlahisoa tsa Renesas. U na le boikarabello ba ho (1) ho khetha lihlahisoa tse loketseng kopo ea hau, (2) ho rala, ho netefatsa, le ho leka kopo ea hau, le (3) ho netefatsa hore kopo ea hau e kopana le litekanyetso tse sebetsang, le polokeho efe kapa efe, ts'ireletso kapa litlhoko tse ling. Lisebelisoa tsena li ka fetoha ntle le tsebiso. Renesas e u fa tumello ea ho sebelisa lisebelisoa tsena molemong oa ho theha sesebelisoa se sebelisang lihlahisoa tsa Renesas. Tlhahiso e 'ngoe kapa tšebeliso ea lisebelisoa tsena e thibetsoe ka thata. Ha ho laesense e fuoang thepa efe kapa efe ea bohlale ea Renesas kapa thepa efe kapa efe ea bohlale ea motho e mong. Renesas ha e na boikarabello bakeng sa, 'me u tla lefa Renesas le baemeli ba eona ka botlalo khahlano le likopo life kapa life, lits'enyehelo, litjeo, litahlehelo kapa mekoloto e hlahang ka lebaka la ts'ebeliso ea hau ea lisebelisoa tsena. Lihlahisoa tsa Renesas li fanoa feela ho latela Melao le Lipehelo tsa Thekiso tsa Renesas kapa lipehelo tse ling tse sebetsang tseo ho lumellanoeng ka tsona ka mongolo. Ha ho ts'ebeliso ea lisebelisoa life kapa life tsa Renesas e atolohang kapa e fetolang liwaranti leha e le life tse sebetsang kapa boitlamo ba waranti bakeng sa lihlahisoa tsena.
© 2023 Renesas Electronics Corporation. Litokelo tsohle li sirelelitsoe.
Ntlo-kholo ea Tsamaiso
- TOYOSU FORESIA, 3-2-24 Toyosu Koto-ku, Tokyo 135-0061, Japan
- www.renesas.com
Matšoao a khoebo
Renesas le logo ea Renesas ke matšoao a khoebo a Renesas Electronics Corporation. Matshwao ohle a kgwebo le matshwao a kgwebo a ngodisitsweng ke thepa ya beng ba ona.
Mokhoa oa puisano
Ho fumana lintlha tse ling mabapi le sehlahisoa, theknoloji, mofuta oa morao-rao oa tokomane, kapa ofisi e haufi le uena ea thekiso, ka kopo etela: https://www.renesas.com/contact/.
© 2023 Renesas Electronics.
Litokomane / Lisebelisoa
 |
RENESAS DA14535MOD SmartBond TINY Bluetooth LE Module [pdf] Bukana ea Mosebelisi DA14535MOD SmartBond TINY Bluetooth LE Module, DA14535MOD, SmartBond TINY Bluetooth LE Mojule, TINY Bluetooth LE Mojule, Bluetooth LE Mojule, LE Mojule |
