REALTEK MCU Config Tool Software Development

Nalane ea Phetoho

Letsatsi	Phetolelo	Maikutlo	Mongoli	Reviewer
2019/08/01	V 1.0	Phetolelo ea Pele	Qinghu	Ranhui
2021/09/28	V3.0		Julie
2022/01/14	V3.1		Julie
2022/05/13	V3.2		Julie
2022/09/05	V3.3		Julie
2022/11/22	V3.4	Phetolelo ea Senyesemane	Annie
2022/12/15	V3.5	Phetolelo ea Senyesemane	Dan
2023/04/18	V3.6	Phetolelo ea Senyesemane	Dan
2023/05/08	V3.7	Phetolelo ea Senyesemane	Dan

Fetileview

Sengoliloeng sena se hlalosa mesebetsi, tšebeliso le litlhophiso tsa MCU Config Tool bakeng sa Realtek Bluetooth Audio Chip (8763ESE/RTL8763EAU/RTL8763EFL IC).
Litlhophiso tsa BT tse hlophisehang le taolo ea peripheral li fanoa ke REALTEK Bluetooth MCU. Ka ho sebelisa MCU Config Tool nakong ea ntshetsopele stage, mosebelisi a ka hlophisa li-parameter tse ngata tsa MCU habonolo.

Tšebeliso ea Motheo

MCU Config Tool e arola likarolo tsa litlhophiso ka li-tab tse fapaneng, joalo ka HW Feature, Audio Route, General, System Configuration, Charger, Ringtone, RF TX joalo-joalo. Litlhophiso tsena li tla hlalosoa likarolong tse latelang.

Kenya

MCU Config Tool e boloka litlhophiso ho *. rcfg files. Ho na le mehato e mene ea ho kenya rcfg file:

Setšoantšo sa 1 2-1 Ho kenya

1. Khetha nomoro ea karolo ea IC ho tsoa lethathamong le theoha;
2. Tobetsa "Import Bin File”Konopo;
3. Khetha faele ea rcf file. The rcfg file e tla laeloa haeba e lumellana le nomoro ea karolo ea IC e khethiloeng mohatong oa 1; ho seng jwalo, e tla latolwa.

Export

Mosebelisi a ka romella tlhophiso ena ka ho tobetsa "Export" ebe o "Boloka joalo ka" kamora hore tlhophiso e phetheloe.

Setšoantšo sa 2 2-2 Boloka e le

Boraro files li tla hlahisoa, 'me mabitso le libaka tsa tsona li tla hlahisoa ka lebokoseng la pop-up:

1. RCFG file: Rcfg file e tla boloka tlaleho ea liphetoho tsohle tse entsoeng ho liparamente tsa hajoale tsa sesebelisoa mme e ka sebelisoa bakeng sa thomello e latelang. Ho eletsoa ho kenyelletsa nomoro ea karolo ea IC lebitsong la rcfg e le hore basebelisi ba bang ba ka e tseba.
2. APP Parameter bin: Bine ena e hloka ho jarolleloa ho Bluetooth SOC.
3. SYS CFG Parameter Bin: Bin ena e hloka ho jarolleloa ho Bluetooth SOC.
4. VP Data Parameter Bin: Bin ena e hloka ho jarolleloa ho Bluetooth SOC.
   Setšoantšo sa 3 2-2 Export
   

Seta bocha

Haeba o hloka ho kenya rcfg file hape ha o ntse o hlophisa, tobetsa "Reset" ebe o "Reset data eohle" ka har'a bareng ea menyu. Ebe u khutlela ho UI ea mantlha ebe u khetha rcfg eo u e batlang file hang hape.

Setšoantšo sa 4 2-3 Etsa bocha

Tlhaloso e qaqileng

Sebopeho sa HW

Taba ea pele ea sesebelisoa, HW Feature, e fana ka kakaretso e felletsengview ea li-switches tsa hardware le likhetho tsa PinMux.
Lisebelisoa tse ling li ka koaloa kapa tsa haneloa ho hlophisoa ho latela mofuta oa chip kapa mofuta oa IC.

Motlakase oa IO

Charger: SoC e na le tjhaja e kopaneng le karolo ea ho bona betri. Bongata ba liselefouno, u ka sheba hang-hang matla a sesebelisoa ka mor'a ho hokela sesebelisoa.
Ho lemoha mocheso oa mocheso: Lekola mocheso oa betri. "Ha ho letho" ke khetho ea kamehla. Thermistor e ka ntle ea hlokahala haeba ho sebelisoa "One Thermal Detection". Ho hlokahala li-thermist tse peli tsa kantle haeba ho khethoa "Dual Thermal Detection".

Setšoantšo sa 5 3-1-1 Ho fumanoa ha Thermistor 

Sebui

Beha mofuta oa sebui ka khetho ena. Phapang mode le Single-end mode ke litlhophiso tsa kamehla.

Setšoantšo sa 6 3-1-1 Sebui

Khetho ea tlhahiso ea log ea DSP

Khetha mokhoa oa tlhahiso ea "debug log" ea DSP ebe u etsa qeto ea hore na u tla e bula kapa che.

Setšoantšo sa 7 3-1-1 khetho ea tlhahiso ea log ea Dsp

Boleng	Tlhaloso
HA HO na tlhahiso ea log ea DSP	Lenane la DSP ha lea sebetsa
Tlhahiso ea data e tala ea DSP ka UART	Log ea DSP e hlahisoa ka phini e khethehileng ea DSP UART, eo mosebelisi a tlamehang ho e hlalosa ho PinMux.
DSP e hlahisoang ke MCU	Hammoho le logong ea MCU, logong ea DSP e hlahisoa (ha feela hore MCU Log e buletsoe)

MIC

Maekerofounu ea SoC e ka hlophisoa hore e lumellane le litlhaloso tse itseng tsa moralo.

1. Likhetho tsa Thuso tsa Voice Mic li tla hlahisoa ha "Enable Voice Dual Mic" e lumelletsoe. Ho itšetlehile ka litlhoko tsa bona, basebelisi ba ka khetha pakeng tsa li-microphone tsa analog le tsa digital.
2. Basebelisi ba ka hlophisa maekerofounu e hlokahalang ho latela maemo a ANC.
3. Ho ipapisitsoe le likhetho tsa bona, basebelisi ba ka khetha lipakeng tsa Low Latency APTs le Normal APTs.

Setšoantšo sa 8 3-1-1 MIC

Pinmux

Mona ke lenane la li-pin le li-pads tsohle tse ka lokisoang. Lipini tse fumanehang lia fapana har'a li-SoC, 'me mesebetsi e fumanehang ea pad e amahanngoa le DSP le bokhoni ba peripheral. Ntho e amanang le tlhophiso le tafole e fapaneng ea APP e tjena:

	tjhaja_tshehetso	Ho beha lits'ebetso tsa phepelo ea motlakase (ho ka bulela tšebetso ea ho tjhaja le ho lemoha betri)

Mokhoa oa molumo

Audio Route e sebelisoa haholo-holo ho lokisa liparamente tsa SPORT (Serial Port) le litšoaneleho tse utloahalang tsa IO tsa tsela ea data ea 'mele.

LIPAPALI

Setšoantšo sa 9 3-2-1 SPORTS

1. SPORT 0/1/2/3: Sheba khetho ena ho bontša hore ho nolofalletsa SPORT e lumellanang.
2. Codec: Hlophisa Codec joalo ka mokhoa oa ka hare kapa oa kantle. Hlokomela hore ha khetho ena e hlophisitsoe joalo ka Kantle, o hloka ho hlophisa pinmux e tsamaisanang le tab ea HW Feature.
   Setšoantšo sa 10 3-2-1 Pinmux
   
3. Karolo: Lokisa karolo ea SPORT. Maemo a boikhethelo ke Monghali le Lekhoba.
4. Bridge Configure hore na o batla ho hokela tataiso ea TX/RX ea SPORT ho sesebelisoa sa kantle. Haeba e behiloe ho "External", SPORT e hokahane le sesebelisoa sa kantle. Haeba e behiloe ho "Internal", SPORT e amana le hardware CODEC ka hare ho IC.
   Hlokomela: Ha e setiloe ho "External", o hloka ho lokisa pinmux e tsamaellanang ho tab ea "HW Feature".
5. Mokhoa oa RX/TX: Lokisa mokhoa oa phetiso ho TX le RX directions ea SPORT. Maemo a boikhethelo ke TDM 2/4/6/8.
6. RX/ TX Format: Lokisa sebopeho sa data sa TX le RX directions ea SPORT. Maemo a boikhethelo ke I2S /Left Justified/PCM_A/PCM_B.
7. RX / TX Bolelele ba Boitsebiso: Lokisa bolelele ba data ho TX le RX directions ea SPORT. Maemo a boikhethelo ke 8/1 6/20/24/32 BIT.
8. RX / TX Length Channel: Lokisa bolelele ba mocha ka litsela tsa RX le TX tsa papali. Boleng ba boikhethelo ke 1 6/20/24/32 BIT.
9. RX /TX Sample Rate: Hlophisa sample lebelo ho TX le RX directions of the SPORT. Maemo a boikhethelo ke 8 /16/32/44.1/48/88.2/96/192/12/24/ 11.025/22.05 KHZ.

Sesebelisoa sa Audio Logic

Audio Logic Device e ts'ehetsa tlhophiso ea litšobotsi tsa IO bakeng sa molumo, Lentsoe, Rekoto, Line-in, Ringtone, VP, APT, LLAPT, ANC le VAD melapo ea data.

Mokhahlelo oa ho Bapala Mantsoe

Setšoantšo sa 11 3-2-2 Audio Logic Device

Mokhahlelo oa ho Bapala Molumo o tšehetsa Audio Primary SPK, Audio Secondary SPK, Audio Primary Reference SPK le Audio Secondary Reference SPK:

1. Audio Primary SPK e sebelisoa ho seta tsela ea Audio Physical Route ea SPK ea mantlha
2. Audio Secondary SPK e sebediswa ho seta Audio Physical Route tsela ya SPK ya bobedi
3. Audio Primary Reference SPK e sebelisetsoa ho seta tsela ea ho khutlela morao ea Audio physical AEC ea SPK e kholo
   Hlokomela: Ha Record Primary Reference MIC e tsamaellanang le Sehlopha sa Rekoto le eona e lokiselitsoe, tsela ea loopback ea AEC pakeng tsa Audio le Record e tla buloa.

Sehlopha sa lentsoe

Setšoantšo sa 12 3-2-2 Sehlopha sa Lentsoe

Sehlopha sa Lentsoe se tšehetsa Voice Primary Reference SPK, Voice Primary Reference MIC, Voice Primary MIC, Voice Secondary MIC, Voice Fusion MIC le Voice Bone MIC:

1. Voice Primary Reference SPK e sebelisoa ho seta tsela ea "loopback ea AEC" ea SPK ea mantlha
2. Voice Primary Reference MIC e sebelisoa ho seta tsela ea "Voice physical AEC loopback" ea MIC ea mantlha
3. Voice Primary MIC e sebelisoa ho hlophisa tsela ea 'mele ea lentsoe ho MIC ea mantlha
4. Voice Secondary MIC e sebelisoa ho seta tsela ea 'mele ea Voice ea MIC ea bobeli
5. Voice Fusion MIC e sebelisoa ho seta tsela ea 'nete ea Voice ea Fusion MIC. Fusion Mic e matlafatsa tšebetso ea NR ha e ntse e sebelisa matla a mangata. Haeba "Fusion Mic" e lumelletsoe ho Sesebelisoa sa McuConfig, etsa bonnete ba hore "Ts'ebetso ea NR" e buletsoe ho Sesebelisoa sa DspConfig.
6. Voice Bone MIC e sebelisoa ho seta tsela ea 'mele ea Voice ea MIC ea Bonse Sensor

Hlokomela:

1. Voice Secondary MIC e ka hlophisoa ha feela Enable Voice Dual Mic ho tab ea HW Feature e hlahlobiloe.
   Tokiso ena ea khokahano e tla tlosoa liphetolelong tse tlang 'me e tla buloa ka kotloloho ho AudioRoute.
   Setšoantšo sa 13 3-2-2 Numella Voice Dual Mic
   
2. Ha Voice Primary Reference SPK le Voice Primary Reference MIC e tsamaellanang le Sehlopha sa Lentsoe li lokisoa, tsela ea loopback ea AEC e tla buloa.

Sehlopha sa Rekoto

Setšoantšo sa 14 3-2-2 Sehlopha sa Rekoto

Sehlopha sa Rekoto se tšehetsa Record Primary Reference MIC:

1. Record Primary Reference MIC e sebelisoa ho seta tsela ea Rekote ea 'mele ea AEC ea loopback ea MIC ea mantlha
   Hlokomela: Ha Primary Reference SPK e tsamaellanang le Sehlopha sa Molumo, Sehlopha sa Ringtone kapa Sehlopha sa Mantsoe a Potlako le tsona li lokiselitsoe, litsela tsa loopback tsa AEC pakeng tsa Audio le Record, Ringtone le Record, kapa Voice Prompt le Record li tla buloa.

Phapang ea IC

AEC Loopback 

1. Ho RTL87X3C, DAC0 e ka khutlela morao ho ADC2 feela, 'me DAC1 e ka khutlela ho ADC3 feela.
2. Ho RTL87X3G, DAC0 e ka khutlela morao ho ADC2 feela, 'me DAC1 e ka khutlela ho ADC3 feela.
3. Ho RTL87X3E, DAC0 e ka khutlela morao ho ADCn (n = 0, 2, 4), 'me DAC1 e ka khutlela morao ho ADCm (m = 1, 3, 5)
4. Ho RTL87X3D DAC0 e ka khutlela morao ho ADCn (n = 0, 2, 4), DAC1 e ka khutlela morao ho ADCm (m = 1, 3, 5)

Kakaretso

BT chip e tšehetsa mesebetsi ea sehlahisoa sa Audio. Litlhophiso li thathamisitsoe tabeng ena.

Oache ea DMIC

DMIC 1/2: Ha maekerofounu ea dijithale e khethoa ho Audio Route, beha sekhahla sa oache sa DMIC 1/2, se ka hlophisoang e le 312.5KHz/625KHz/1.25MHz/2.5MHz/5MHz reiti ea oache.

Moqtage / Hona joale

MICBIAS voltage: Fetola tlhahiso ea MICBIAS voltage ho latela litlhaloso tsa MIC, e ka hlophisoa joalo ka 1.44V/1.62V/1.8V, 'me ea kamehla ke 1.44V

Tlhophiso ea Sistimi

Thebo ea tlhophiso ea Sistimi e na le stack ea Bluetooth, profiles, OTA le tlhophiso ea sethala, joalo-joalo.

Bluetooth stack

1. Aterese ea BD: Aterese ea Bluetooth ea sesebelisoa. Litlhophiso tsa liaterese tsa bluetooth li fumaneha feela ha "Export BD Address to System Config bin" e hlahlojoa, 'me aterese e tla be e le ka har'a bin e romelloang kantle ho System Config.
   Setšoantšo sa 15 3-4-1 Bluetooth Stack
   
2. Mokhoa: Mokhoa oa ts'ebetso oa stack ea Bluetooth ho BT chip.
   

   Boleng	Tlhaloso
   Mokhoa oa HCI	Ke molaoli feela ea sebetsang ho BT chip
   Mokhoa oa SOC	Lisebelisoa tsohle tsa Bluetooth lia sebetsa

3. Nomoro ea khokahanyo ea BR/EDR: Palo e phahameng ka ho fetisisa ka nako e le 'ngoe ea lihokelo tsa BR/EDR. Haeba u khetha boholo ba lisebelisoa tse tharo bakeng sa tšehetso ea Multi-link, sesebelisoa sa pele se tla khaoloa e le ho fana ka sebaka bakeng sa sesebelisoa sa boraro. Haeba ho se joalo, e 'ngoe ea lisebelisoa tse peli tsa pele tse hokahaneng e tlameha ho khaoloa pele sesebelisoa sa boraro se ka hokeloa.
4. Nomoro ea kanale ea L2CAP: Palo e holimo ea likanale tsa L2CAP tse ka etsoang ka nako e le 'ngoe. Linomoro tse sebetsang ke 0~24.
5. Nomoro ea sesebelisoa sa bond ea BR/EDR: Palo ea lisebelisoa tsa BR/EDR tse tla boloka lintlha tsa bonto ka flash. Nomoro ena ha e na ho ba ka tlase ho nomoro ea khokahanyo ea BR/EDR 'me e tla ba ka tlase ho kapa ho lekana le 8.
6. Nomoro ea khokahanyo ea LE: Palo e kholo ea lihokelo tsa LE tse ka theoang ka nako e le 'ngoe.
7. Nomoro ea khokahanyo ea LE master: Boleng bona bo lekanya palo e kholo ea lihokelo tsa master tse ka bang teng ka nako e le 'ngoe
8. Nomoro ea khokahanyo ea LEkhoba: Boleng bona bo lekanya palo e kholo ea lihokelo tsa lekhoba tse ka bang teng ka nako e le 'ngoe
9. CCCD count: Palo e phahameng ka ho fetisisa ea li-CCCD tse ka bolokoang ka flash
10. CCCD ka palo ea lihokelo: Beha palo ea li-CCCD tse tšehetsoeng ke sehokelo se seng le se seng sa BLE, ho tloha ho 0 ho isa ho 50
11. LE mokhoa oa lekunutu
    

    Boleng	Tlhaloso
    Lekunutu la sesebelisoa	sesebelisoa se maemong a lekunutu
    Lekunutu la marang-rang	sesebelisoa se maemong a lekunutu

12. CCCD ha e hlahlobe
    

    Boleng	Tlhaloso
    Thibela	Pele o tsebisa kapa o bonts'a data, seva e tla hlahloba boleng ba CCCD.
    Thusa	Seva e tsebisa kapa e bonts'a data ntle le ho hlahloba boleng ba CCCD.

13. Nomoro ea sesebelisoa sa LE bond: bongata ba lisebelisoa tsa LE tse tla bolokoa ka flash. Nomoro ena e ke ke ea ba ka tlase ho nomoro ea khokahano ea LE kapa ho feta 4.

Tlhophiso ea oache

Bakeng sa litlhophiso tse amanang le sistimi ea 32K, ka kopo sheba litlhaloso tse latelang bakeng sa lintlha tsa masimo (sebopeho sa litlhophiso tsa mefuta e fapaneng ea Chip Series kapa IC e fapane):

1. AON 32K CLK SRC: Mohloli oa oache oa 32k oa AON FSM. 32k XTAL ea kantle ea boikhethelo, RCOSC SDM ea kahare, GPIO IN. Li-SoC tse fapaneng li kanna tsa ba le likhetho tse fapaneng tse fumanehang.
2. RTC 32K CLK SRC: Mohloli oa oache oa 32k oa Mosebelisi RTC. 32k XTAL ea kantle ea boikhethelo, RCOSC SDM ea kahare, GPIO IN. Li-SoC tse fapaneng li kanna tsa ba le likhetho tse fapaneng tse fumanehang.
3. BTMAC, SysTick 32K CLK SRC: Mohloli oa oache oa 32k oa BTMAC/SysTick. Khetho ea 32k XTAL ea kantle kapa ea ka hare ea RCOSC SDM
4. EXT32K Frequency: Khafetsa ea mohloli oa oache oa 32k o kantle. 32.768KHz kapa 32k Hz e ka khethoang
5. Numella P2_1 GPIO 32K Input: E bontša hore na ho tšeloa 32K ho tloha P2_1 ho ea ho SOC. Ha AON, BTMAC, mohloli oa oache oa RTC o khethoa ho 1 (ka ntle 32K XTAL), ho bolela ho sebelisa GPIO IN 32k; ha AON, BTMAC, mohloli oa oache oa RTC o khethoa ho 0 (kantle 32K XTAL), ho bolela ho sebelisa 32K XTAL ea kantle.
6. RTC 32K OUT PIN: Khetho ea 32k GPIO ea tlhahiso. O ka khetha Disable, P1_2, P2_0

Moqtage Setting

Setšoantšo sa 16 3-4-3 Moqtage Setting

Litlhophiso tsa LDOAUXx: E sebelisetsoa ho seta voltage. Haeba o hloka ho ba le molumo o fapanengtagLitlhophiso tsa e ho latela mekhoa e fapaneng ea matla, voltagE seta masimo a mefuta e fapaneng ea matla a tla hlahisoa joalo ka ha ho bonts'itsoe setšoantšong se kaholimo.

Bakeng sa mohlalaample: masimo a mode e sebetsang / dlps le mokhoa oa ho theola matla maemong a LDOAUX Hore na LDOAUXx e nolofalitsoe ho latela IO. Ha e setetsoe ho "Enable", e tla bula LDO_AUX2 ho molumo o boletsoengtage (1.8V kapa 3.3V). Haeba ho se na tšimo e joalo, ho bolela hore LDO ena e ke ke ea koaloa.
AVCCDRV kamehla e butswe: E sebedisetswa ho seta hore na AVCCDRV e hloka ho dula e butswe, kapa e butswe ha feela modumo o le teng.
Moqtage ea AVCCDRV/ AVCC: AVCC_DRV/AVCC voltagtlhophiso ea e, e ka hlophisoang ho 1.8V/1.8V kapa 2.1V/2.0V ho latela ts'ebeliso ea li-peripherals

Sethala sa Configuration

1. Sephetho sa Log: Hore na o tla hlahisa lintlha ho Log UART. Khetho ea kamehla e buletsoe.
   

   Boleng	Tlhaloso
   Thibela	Mongolo oa khatiso o koetsoe
   Thusa	Khatiso ea li-log e lumelletsoe

2. Log output pinmux: lokisa pin bakeng sa tlhahiso ea log.
3. Log uart hw flow ctrl: Taolo ea phallo ea hardware ea log uart e koetsoe. Ho nolofalletsa log uart hardware flow control, u tlameha ho khetha log uart cts pinmux e fumanehang, hokela log uart cts pinmux ho FT232 log uart RTS pin, ebe u seta Taolo ea Phallo sebakeng sa log ea Debug Analyzer ho RequestToSend.
4. Numella SWD: Bula SWD debug interface.
5. Seta hape ha Hardfaut: Ha Hardfaut ea sethala e hlaha, sethala se tla qala bocha ka bohona.
6. Nako ea Nako ea ho Lebela: Lokisa nako ea ho tsoa ha watchdog.
7. WDG Nolofatsa ho ROM: Lumella WDG hore e sebelisoe ho rom.
8. WDG Auto feed in ROM: Fepa ntja ka bohona ho rom.
9. Nomoro ea Nako ea Max SW: Palo e phahameng ka ho fetesisa ea li-software tsa nako.
10. Mokhoa oa ho shebella: mokhoa ka mor'a nako ea wdg (seta bocha kapa kenya irq ho hatisa boemo ba hajoale)

Setlhophiso sa Header ea OEM

Lintlha tsa sebopeho sa 'mapa oa Flash. Sebopeho se ka fetoloa ka konopo ea "Import flash map.ini".

Setšoantšo sa 17 3-4-7 OEM Header setting

Charger

Charger

Lebokose la ho hlahloba la "Chaja" le leqepheng la HW Feature le hloka ho khethoa e le ho nolofalletsa tjhaja.

Setšoantšo sa 18 3-5-1 Charger

1. Charger auto enable Ho etsa qeto ea hore sesebelisoa se tla kena mocheng oa chrger ka bohona kapa che ha adaptara e kena, ea kamehla ke "YES", ka kopo u se ke oa e fetola ntle le haeba o se o ikopanye le FAE mme o utloisisa ka botlalo mokhoa oa ho lumella tjhaja ka "NO. ” setting.
2. Beha tlhophiso ea Charger ho APP config Haeba lebokose la ho hlahloba le setiloe, likarolo tsohle tsa tlhophiso ea tjhaja li tla kenngoa ho APP config bin. 'Me firmware ea tjhaja e tla sebelisa li-params ho APP config bin sebakeng sa SYS config bin. E le hore liparamente tsa tjhaja li ka ntlafatsoa ka OTA.
3. Nako ea ho qeta (metsotso): Nako ea ho qeta nako ea ho tjhaja betri, sebaka ke 1-65535min
4. Nako ea ho tjhaja ka potlako (metsotso): Mokhoa oa ho tjhaja betri ka potlako (mokhoa oa CC + CV) nako ea ho qeta nako, sebaka ke 3-65535min
5. Tefiso ea hajoale ea boemo ba pre-charge(mA):Peakanyo ea hajoale ea mokhoa oa ho tjhaja
6. Tlhōlisano ea boemo ba Fast-charge (mA): mokhoa oa ho tjhaja (CC mode) boemo ba hajoale
7. Hlahisa hape Moqtage(mV): Re-charge mode voltagmonyako
8. Moqtagmoeli oa betri(mV): Sepheo sa mokhoa oa CV
9. Charge finish current(mA): Qetello ea ho tjhaja, tjhaja boemo ba hajoale ka mokhoa oa CV
10. Tšireletso ea mocheso oa tjhaja Tšireletso ea mocheso oa betri ka mokhoa o potlakileng oa ho tjhaja, ho na le linaha tse 'nè ho latela ADC ea bohlokoa e baloang. Sehlahisoa sa thermistor se tlameha ho khethoa leqepheng la likarolo tsa HW.
    Setšoantšo sa 19 3-5-1 Ho lemoha mocheso oa tjhaja
    
    i) Lemosa Sebaka Moqtage of Battery High Temperature (mV): Motlakase oa tjhaja o tla theohela ho (I/X2) hang ha molumo ona oa ADCtage ea baloa. "I" ke mochine oa tjhaja pele mocheso o phahameng o fihla. X2 ke
    e hlalositsoe ho ntlha19.
    ii) Warn Region Voltage of Battery Low Temperature (mV): Mohala oa tjhaja o tla theohela ho (I/X3)
    hang ena ADC voltage ea baloa. "I" ke motlakase oa tjhaja pele mocheso o tlase o fihla. X3 ke
    e hlalositsoe ho ntlha20.
    iii) Sebaka sa Phoso Voltage of Battery High Temperature (mV): Sebaka sa ho tjhaja ha jwale se ema hang ha ADC ena
    voltage ea baloa.
    iv) Sebaka sa Phoso Moqtage of Battery Low Temperature (mV): Ho ema hona joale ha tjhaja hang ha ADC ena
    voltage ea baloa.
11. Reference Battery Voltage (mV): Ho hlalosa moelelo oa moelelotage bakeng sa 0% ho isa ho 90% ho bonts'a mesaletsa ea betri
    bakeng sa ponts'o ea smartphone, tlhokomeliso ea betri e tlase le ho tima matla. Ka kopo fumana maemo a leshome ho latela
    curve ea ho tsoa ha betri e ntseng e eketseha 'me e arole ka mekhahlelo e leshome.
12. Resistance e Sebetsang ea Battery (mOhm): Betri e sebetsa ka katleho ho kenyelletsa le betri
    ho hanyetsa ka hare, mohlala oa PCB le terata ea betri. E sebelisetsoa ho lefella IR voltage theoha ka lebaka la
    khanyetso e eketsehileng e sebetsang.
13. Tlosa Charger ka mor'a ho tjhaja 1 min (Lumella mokhoa o fokolang oa matla):
    • E: Sesebelisoa se tla kena mocheng oa ho theola motlakase 1min kamora ho qeta tjhaja (mokhoa oa CV o fihla ho tjhaja
      finish current), tjhaja e tla qala hape ha feela adaptara e tima mme adaptara e kena hape.
    • Che: Sesebelisoa se tla emisa ho tjhaja kamora ho qeta tjhaja empa se ke ke sa kena mokgweng wa ho theola motlakase, tlasa
      boemo bona haeba betri e theoha ka lebaka la ho kenya le ho fihla Re-Charge Voltag, tjhaja e tla qala hape.
      Hlokomela adaptara 5V boits'oaro lebokoseng la litefiso
    • Haeba 5V e ke ke ea theoha le ha tjhaja e felile, ka kopo, beha "Thibela Charger kamora ho tjhaja qetellong ea 1 min(Lumella mokhoa o tlase oa matla)" joalo ka "E" e le hore sistimi e ka kena mocheng oa ho theola matla ho boloka ts'ebeliso ea hajoale.
    • Haeba 5V e tla theoha ka mor'a hore tjhaja e qete, semamedi se tla se ahlola ka hore ha se teng mme se butswe, hokela fonong e bohlale. Ho qoba boemo bona bo fosahetseng, ka kopo, kenya phini ea 3 e le "box detect" (0= in box) kapa taelo ea lebokose la tjhaja e bohlale.
14. Ts'ehetso ea ho tjhaja ka potlako: Haeba E nolofalitsoe, tjhaja ea mode ea CC e tla latela litlhophiso tsa tjhaja e potlakileng
    (e hlalosoa e le 2C) le ho lieha ho (2C/X1, X1 hlalosa ka ntlha 19) ha VBAT fihla 4V. mohlala, haeba matla a betri
    ke 50mA, ka kopo seta 100mA bakeng sa ts'ebeliso e potlakileng ea tefiso.
    Tlhokomeliso: Haeba moreki a fetola boitšoaro ba tjhaja kapa a sebelisa tjhaja ea kantle ea IC, ka kopo etsa hore tefiso e potlake e koetsoe.
15. Karohano ea hona joale ea tefiso e potlakileng: Beha paramente "X1" ha o nolofalletsa ho tjhaja ka potlako, tefiso ea hajoale e tla
    theohela ho (2C/X1, 2C e potlakile ho tjhaja diseting) ha betri e le matlatage fihla ho 4V.
16. Temoso e phahameng ea mocheso oa hona joale oa ho arola Beha parameter "X2" ha 'malo oa mocheso oa ADC o fihla moeling oa mocheso o phahameng.
17. Sekhahla sa temoso ea mocheso o tlase Beha parameter "X3" ha 'malo oa mocheso oa ADC o fihla tlase
    moeli oa mocheso.

Adapter

Tlase ho ea ho Phahameng ea Temo e Phahameng: Adapter ka voltagmonyako
Ho ea Holimo ho ea Tlase Temollo: Adapter out voltagmonyako
Nako e tlase ho isa ho e Phahameng (ms): Ha adaptara e kena, e tla amoheloa e le adaptara maemong ka mor'a vol.tage phahame ho feta serethe mme o boloke ho feta sebali sena sa nako.
Nako e phahameng ho isa ho e tlase (ms): Ha adaptara e tsoa, ​​​​e tla tsejoa e le adapter out state kamora vol.tage tlase ho feta serethe, 'me u boloke nako e fetang ena.
Ts'ehetso ea Adapter IO: Haeba E, 1-wire uart e sebelisa hape pin ea adaptara e lumelletsoe.
ADP IO e Tlase ho ea ho Nako e Phahameng ea Phatlalatso (ms): Adapter IO e tlase ho isa holimo, 'me e lule e le holimo ka nako e itseng, sistimi e tla ahlola joalo ka mokhoa oa ho tlohela terata e le 'ngoe, haeba "1ms", nako ea "debounce" ea kamehla e le 0ms.
ADP IO Holimo ho Nako e Tlase (ms): Adapter IO e holimo ho ea tlase, 'me e lule e le tlase ka nako e itseng, sistimi e tla ahlola joalo ka mokhoa oa terata e le 1, haeba "0ms", nako ea debounce e le 10ms.

Ntho ea tlhophiso le tafole ea mangolo e fapaneng ea APP

Charger
	discharger_support battery_warning_percent timer_low_bat_warning timer_low_bat_led	Litlhophiso tsa alamo ea betri e tlase

Molumo o llang

Thepa ea medumo e llang e fana ka tlhophiso ea molumo oa lentsoe le ho potlakisa lentsoe. Mona, basebedisi ba ka personalize medumo e llang le Import ditshusumetso tsa lentsoe.

Tsebiso ho kopanya Setlhophiso

1. Tlhophiso ea ho kopanya tsebiso: Haeba boleng bo nolofalitsoe, tsebiso e tla bapaloa sebakeng sa molumo, 'me tse peli li tla tsoakoa; haeba boleng bo koetsoe, tsebiso e tla bapaloa sebakeng sa molumo, 'me tsebiso e tla bapaloa ka thoko. Kamora hore tsebiso e bapaloe, molumo o tla tsoela pele ho bapala.
2. Phaello e Khatelitsoeng ea ho Bapala ha Li-Audio (dB): Ha tlhophiso ea ho kopanya Tsebiso e lumelletsoe, sebakeng sa molumo, haeba tsebiso e kena, molumo oa molumo o tla theoleloa ho totobatsa phello ea tsebiso. U ka laola hore na u ka hatella phello e kae ka ho fetola phaello ea khatello.

Molaetsa oa lentsoe

Setšoantšo sa 20 3-6-2 Puisano ea Lentsoe

1. Puo ea tšehetso ea kapele ea lentsoe: E ts'ehetsa litlatsetso tsa lentsoe tse hahelletsoeng ka hare ho lipuo tse ka bang 4. Mosebelisi o khetha hore na sehlahisoa sena se tšehetsa lipuo life.
2. Puo ea kamehla ea lentsoe: Mosebelisi o khetha puo e le eona puo ea kamehla.

Nchafatsa Voice Prompt

Ho nchafatsa Mantsoe a Mantsoe ao sesebelisoa se se hlokometseng, latela litaelo tse ka tlase.

1. Khetha lipuo tse tšehetsoeng hang-hang ho latela litlhoko tsa hau (Puo ea tšehetso ea kapele-pele)
2. Ntlafatsa wav file foldareng ". \Molaetsa oa Lentsoe ". Wav files e tlameha ho fihlela litlhoko tse latelang:
   ke. Mono kapa stereo audio
   ii. Ho latela samplikhahla tsa nako li lumelloa: 8KHz, 16KHz, 44.1KHz, 48KHz. File Lebitso le ngotsoe joalo ka *.wav. Hlokomela hore haeba lipuo tse ngata li khethiloe, wav files foldareng ea puo e fapaneng e tlameha ho ba le lebitso le tšoanang. Sesebelisoa se ke ke sa tseba files ka tse sa tsitsang file mabitso a foldareng ya puo ha ho kgethwa dipuo tse ngata. Mohlala, ha re re SOC e sebelisa lentsoe la Senyesemane le Sechaena ka bobeli. Haeba u batla ho apdeita “power_on.wav” le “power_off.wav”, li behe ka har’a lifoldara joalokaha ho bontšitsoe.
   
3. Tobetsa konopo ea "Refresh" ho qala ho batla sesebelisoa le ho fumana wav files ho hard drive.
4. Tobetsa konopo ea "Update" ho lekola boholo bo hlokahalang ba molaetsa oa lentsoe o romelloang ho Bin. Ka kopo etsa bonnete ba hore boholo bo akaretsang ba Voice Prompt ha bo fete boholo ba boholo bo lumelletsoeng ba sebopeho sa SOC Flash. Wav files e tla fetoloa ho lentsoe kapele ka sebopeho sa AAC. Ka ho lokisa "parameter ea lentsoe prompt ea file saese” paramethara, eo sebaka sa eona se nepahetseng e leng 10–90, o ka etsa boleng ba molumo oa VP. Litekanyetso tse kholo tsa parameter li tla fella ka boleng bo betere ba molumo oa VP, empa ho tla hlokahala sebaka se eketsehileng sa flash. Molaetsa oa lentsoe file lebitso le litaba li tla rekotoa ka mor'a hore tlhophiso e phethoe le rcfg file e romelloa kantle ho naha. Lintlha tsa VP li ka sebelisoa haeba rcfg e romelloa ka ntle nakong e tlang.

Mantsoe a romelloang kantle ho naha

Li-Voice Prompts life tse romelloang ho Bin li hlalositsoe karolong ena.

1. Haeba ho khethiloe khetho ea "Boloka mantsoe ohle a lentsoe ho disk hore na u khethe kapa che ho Khetho ea Tone" e khethiloe: Bohle ba VP files eo Tool hajoale e e hlokomelang e tla romelloa ho Bin.
2. Haeba khetho ea "Boloka mantsoe ohle a lentsoe ho disk hore na u khethoe kapa che ho Khetho ea Tone" ha e khethiloe:
   Ke molaetsa oa lentsoe feela o khethiloeng ho latela boemo ba molumo ho "Khetho ea Molumo" o bokelloang ke sesebelisoa. Ka mantsoe a mang, e ke ke ea ngolloa Bin haeba VP e khethiloeng ke Tool e sa khethoa ho "Tone Selection."
3. Haeba ” Numella nomoro ea tlaleho ea TTS feela” e khethiloe, li-VP tse ling li tla romelloa ka bohona ho Bin bakeng sa tšebetso ea TTS (Sesebelisoa se hlokomela mabitso a VP e le “0”, “1”, “2”, “3”, “4”, “ 5", "6", "7", "8", "9").

Lokisa Ringtone

Setšoantšo sa 22 3-6-5 Hlophisa Ringtone

"Available Ringtones" e thathamisa melumo e llang e ka khethoang bakeng sa ho romelloa ka har'a bin file. Tobetsa konopo ea "Tone Config" ho fetola "Available Ringtone".

Sesebelisoa se fana ka melumo e 45 e sa fetoleheng. Ho tloaeleha ha medumo e llang le hona hoa tšehetsoa.

1. Ha molumo o llang o khethiloe, o tla hlaha lethathamong la "Melumo e llang e fumanehang".
2. Tobetsa konopo ea "Bapala" ho utloa molumo oa Ringtone.
3. Tobetsa konopo ea "Value" ho hlahloba data ea Ringtone.

Kenya Ringtone e ikhethileng:

Mohato oa 1: Tobetsa konopo ” Eketsa tse ling ka moreki” ho eketsa molumo o llang o mocha.
Mohato oa 2: Fana ka molumo o llang oa tloaelo lebitsong la editbox. Etsa bonnete ba hore lebitso lena le fapane le lebitso le teng la "Ringtone e sa fetoleheng".
Mohato oa 3: Tobetsa konopo ea "Value" ho tlatsa data ea molumo, ebe u e boloka. Tobetsa konopo ea "Play" ho utloa molumo oa Ringtone.
Hlokomela: Khetha lebokose la ho hlahloba ho hlahisa Molumo ona o llang o tloaelehileng lethathamong la ” Available Ringtones ”.

Setšoantšo sa 23 3-6-5 Tlhophiso

Maikutlo a ho romela melumo e llang

Karolo ena e hlalosa hore na ke melumo efe e llang e romelloang kantle ho Bin.

1. Haeba ho khethiloe khetho ea "Boloka data eohle ea molumo e hlahlobiloeng hore na e tla khethoa kapa che ho Khetho ea Molumo" e khethiloe: Melumo eohle e llang ho "Available Ringtone" e tla romelloa ho Bin.
2. Haeba khetho ea "Boloka data eohle ea molumo e hlahlobiloeng hore na e tla khethoa kapa che ho Khetho ea Molumo" e sa khethoa:
   Sesebelisoa se bokella feela melumo e llang e khethiloeng ho latela boemo ba molumo ho "Khetho ea Molumo". Ka mantsoe a mang, haeba molumo o llang ho "Available Ringtone" o sa khethoa ho "Tone Selection", e ke ke ea ngolloa Bin.

View Molumo oa Ringtone / Voice Prompt index le bolelele

Tobetsa konopo ea "Show index" ho ea view Lintlha tse latelang tsa Ringtone le VP:

1. Lenane la Ringtone/VP ho Bin e romelloang kantle ho naha.
2. Boholo ba data ba Ringtone/VP.

Setšoantšo sa 24 3-6-7 Ringtone / VP index le bolelele

RF TX

RF TX Matla

Litekanyetso tsena tsa RF li tla romelloa ho System Config Bin e ncha e hlahisitsoeng ha feela "Export RF TX Power to System Config Bin" e lumelletsoe. Ho seng joalo, e ke ke ea romelloa ho bin file.

1. Matla a Max Tx a lefa: Legacy BDR/EDR TX setting ea matla
2. Tx matla a LE: LE TX tlhophiso ea matla
3. Tx Matla a LE 1M/2M 2402MHz/2480MHz:molumo o motle ka bo mong 2402Hz (CH0) le 2480MHz (CH39) TX setlhophiso sa matla bakeng sa ho fana ka setifikeiti, sena ke haholo-holo tlhokahalo ea ntho ea tlhahlobo ea band.

RF TX Config

Setšoantšo sa 25 3-7-2 RF TX Config

Litekanyetso tsena tsa RF li tla romelloa ho System Config Bin e ncha e hlahisitsoeng ha feela "Export RF TX Config to System Config Bin" e lumelletsoe. Ho seng joalo, e ke ke ea romelloa ho bin file.

1. Flatness 2402-2423MHz/2424-2445MHz/2446-2463MHz/2464-2480MHz(dBm): Likanale tsa RF li arotsoe ka lihlopha tse tlase/mid1/mid2/high ka likanale tse 79, ka lebaka la botenya ba PCB, taolo ea ho se sebetse le karolo e itseng. , ts'ebetso ea RF TX e ka 'na ea fapana har'a lihlopha tse fapaneng, parameter ena e sebelisetsoa ho etsa matšeliso ka lihlopha tse' nè ho boloka flatness e ntle bakeng sa liteishene tsa BT.
2. Adaptivity (LBT) E nolofalletse: Etsa hore ho fetoloe bakeng sa Directive ea CE
3. Adaptivity (LBT) Fumana Antenna: Tlatsa phaello ea tlhoro ea antenna bakeng sa paramethara ea ho ikamahanya le maemo.
4. BR/EDR Level Number of Power Control: hlalosa boemo ba taolo ea matla a TX, 3 (0,1,2) kapa 4 (0,1,2,3), 0 ke boemo bo phahameng bo hlalositsoeng ho RF TX Config ka holimo. Boemo ba matla ba TX bo sa feleng ke 0 mme bo ka hlophisoa ke Default BR/EDR Tx Power Level
5. Boemo ba Motlakase ba BR/EDR Tx: 0(MAX)~4(MIN)

Frequency Offset

Setšoantšo sa 26 3-7-3 Hangata

Litekanyetso tsena tsa RF li tla romelloa ho System Config Bin e ncha e hlahisitsoeng hafeela "Export Frequency Offset to System Config Bin" e lumelletsoe. Ho seng joalo, e ke ke ea romelloa ho bin file.

1. Khafetsa: Fetola boleng ba IC ea mats'eliso a kahare a capacitor (XI/XO), mofuta o ka fetolehang ke 0x00 ~ 0x7f, ka phetoho ea 0.3pF mohato ka mong. 0x3F ea kamehla
2. Phahamiso ea Maqhubu a Matla a Motlakase: Lokisa boleng ba capacitor ea kahare ea IC (XI/XO) ka mokhoa oa DLPS, paramethara ena e fosahetseng e tla baka bothata ba ho khaola.

Litlhophiso tse ling

1. PA ea kantle: Beha Noble bakeng sa ho sebelisa PA ea kantle, ho seng joalo bakeng sa ho sebelisa PA ea kahare.

Sehlomathiso

1. Sistimi ea config bin file e na le tlhophiso ea li-tab tsa "System Configuration," "Charger" le "RF TX". Leha ho le joalo, likarolo tse ling tse ho "Charger" li bolokiloe ka har'a bin ea tlhophiso ea app, joalo ka ha ho bonoa setšoantšong se latelang:
2. Tlhophiso ho thebo ea Audio Route e na le tšusumetso ho block ea moralo. Litlhophiso tsena li bolokiloe ka har'a moqomo oa li-app file
3. Lintlha tsa RingTone/Voice Prompt le leseli la LED li bolokoa ka li-block tse arohaneng ka har'a moqomo oa sesebelisoa file. Karolong e 'ngoe ea karolo ea IC, RingTone/VP e ka bolokoa ka moqomong o ikhethileng oa VP file.

Litšupiso

1. Bluetooth Sehlopha sa tlhaloso ea sesebelisoa
2. https://www.bluetooth.com/specifications/assigned-numbers/baseband
3. Tokomane ea Realtek Bluetooth chip SDK
4. Bluetooth SIG, Tlhaloso ea Bluetooth System, Profiles, Advanced Audio Distribution Profile mofuta 1.3 .1
5. https://www.bluetooth.org/DocMan/handlers/DownloadDoc.ashx?doc_id=303201

Litokomane / Lisebelisoa

REALTEK MCU Config Tool Software Development [pdf] Bukana ea Mosebelisi MCU Config Tool Development Development, MCU, Config Tool Software Development, Tool Software Development, Software Development

Litšupiso

• Bukana ea Mosebelisi